Oracle.apps.ar.hz.Location.update event still working

Dear All,
I facing a problem, a even was disabled few months back, but still the even sending work flow mails. i have followed this below metalink document
Oracle.Apps.Ar.Hz.Location.Update / Oracle.Apps.Ar.Hz.Location.UpdateXXXXXX [ID 352888.1]
As per the Document, i have disabled the event,, now again the same wf mail coming, what might be the reason,, how to stop this WF
Regards
HAMEED
Edited by: Hameed on Aug 10, 2011 2:57 AM

Not yet,
i found another Metalink note *Can the event 'oracle.apps.ar.hz.Location.update' be disabled? [ID 315800.1]*.
According to this note, i have disabled this following two subscriptions
WSH_MAP_LOCATION_REGION_PKG.Rule_Location
hz_crmhk_pkg.update_location_prenow waiting for the Client mail, if the wf is not triggred then no problem otherwise i have log an SR as u said.
more over i have a doubt in that above mentioned metalink note, can u explain me what is TCA information
These functions would not get executed via workflow but the application that uses these will have a way to handle this in the application. Please check with those groups on what >to run in those applications to handle the workflow functions.
It is fine to disable the event or if you do not want to run any of the TCA workflow events then just set the HZ: Execute API Callouts profile option to NO and workflow events will >not be used for when updating TCA information.Regards
HAMEED
Edited by: Hameed on Aug 10, 2011 2:57 AM

Similar Messages

Oracle.apps.ar.hz.Location.update even still working

Dear All,
I facing a problem, a even was disabled few months back, but still the even sending work flow mails. i have followed this below metalink document
*Oracle.Apps.Ar.Hz.Location.Update / Oracle.Apps.Ar.Hz.Location.UpdateXXXXXX [ID 352888.1]*
As per the Document, i have disabled the event,, now again the same wf mail coming, what might be the reason,, how to stop this WF
Regards
HAMEED

Hi Hameed;
lose your thread here as changing thread status to answered and move it to Forum Home » E-Business Suite » EBS General Discussion
Regard
Helios

Oracle.apps.wf.notification.receive.message event subscription

Hi,
I have created a custom test subscription for the above event.I have simply created a rule function which inserts values in a custom table to show that the event is being fired.
I tested from workflow responsibility, and yes, event is being captured and values are being inserted in the custom table. Means, from test subscription, its working.
However, now I am trying to respond an notification from email(actual testing of the event). The notificatoin gets processed, but my function is not being called. In other words, possibly my event subscription is not being fired, seeded one is working though.
I checked WF_NOTIFICATION_IN table. The email responses are received here and their state also shows from 0 to 2 changing. Also, the DEQ_TIME column also has values.
So the question is how to know why my subscription is not being fired?
Thanks,
Abdul Wahid

One Update.
I tried to fire some different event and registered this function with that.
Its working with this event.
Does that mean that oracle.apps.wf.notification.receive.message event is not being fired?

ID parameter name for oracle.apps.ar.hz.CustomerProfile.update BE

Dear All,
I am not able to find ID parameter name for oracle.apps.ar.hz.CustomerProfile.update businees event.
TIA.

Hi Hameed;
lose your thread here as changing thread status to answered and move it to Forum Home » E-Business Suite » EBS General Discussion
Regard
Helios

Oracle.apps.gl.Journals.journal.post event parameter

I have written a subscription on the oracle.apps.gl.Journals.journal.post event and it's raising fine and I would like to control this event's subscription to a particular set of books id instead of firing across all set of books. How can I send the parameter to my event subscription?
Thanks,
Srini C

The note shows the raising the subscription, I have successfully generated the subscription but I need to know the how can I pass the set of books id to my custom subscription.
Thanks,
Srini C

Oracle.apps.ont.oi.xml_int.status event

I am trying to set up a subscription on the oracle.apps.ont.oi.xml_int.status(11.5.10) event via processing constraint to raise the subscription after the pick release. I am using the update operation and user action as Raise Integration event but not raising this event after the pick release.
Is there any event available in the 11.5.10 to raise the subscription after the back orders?
Thanks,
Srini C

hi,
No business event is raised when Order is booked. You have to use OM show sales order workflow to raise event on booking of Order.
Rgds,
Shahnawaz

Oracle apps Adapter for EBS group event

Hi
I am working on EBS - OTM integration through SOA.
I have configured EBS group event in SOA through Oracle apps adapter but it is not creating instance on EM for same composite eventhough records are getting enqueued in EBS queue.
EBS version - 12.1.1
SOA version - 11.1.1.7
If anybody faced same issue please help me to resolve this.
Thanks
Renu

We also have same requirement. We have BPEL connection using custom oracle user, xx_b2b and when we use APPS adapter, I can not see and use any business event.
If anybody across same requirement, please share your experience.
Appreciate help on this.
Thanks,
Sonartori

Oracle.apps.fnd javadoc location

Hi,
Can anyone tell me where I can get hold of the javadoc for this package?
I'm specifically interested in oracle.apps.fnd.common.AppsContext?
I've searched google, the forums and metalink but not found an answer..!
Thanks in advance
Andy

Did you try asking on {forum:id=210}

Oracle APPS custom form using KFF is not working as expected

Hi,
I have created a custom form and using KFF to accept code combination in line block. My custom form is based on AP_INVOICES_INTERFACE and AP_INVOICE_LINES_INTERFACE.
When I query the records in form and update the code combination field using keyboard (typing or copy-paste) it works fine at first time but when I re-enter another code then it does not accepts the new code and reverts to previous code. Form accepts the same code when KFF screen is using by pressing LOV button. I concluded this problem as "when record status is QUERY then KFF works fine with keyboard but when record status changes to CHANGED then it does not accepts the new code when entered using keyboard".
I have created all triggers and invoked relevant fnd_flex.event in triggers. I have created PRE-QUERY, POST-QUERY, PRE-INSERT, PRE-UPDATE, WHEN-VALIDATE-ITEM, WHEN-VALIDATE-RECORD, WHEN-NEW-ITEM-INSTANCE, KEY-EDIT, KEY-LISTVAL at form level and calling FND_FLEX.EVEND and APPS_STANDARD.EVENT (where required) in triggers.
This same issue is in AP Invoice Workbench form. When updateing code combination in distribution block in invoice form is showing same behaviour.
I am running this form in 12.1.2, same form is working in other instance which is on 12.1.3.
Please help.
Regards,

Please check the below link just to make sure all steps are taken care.
http://oraclemaniac.com/2012/08/15/how-to-add-a-descriptive-flexfield-dff-in-a-custom-oracle-apps-form/

I can't search for apps in App Store why not? Genius still works but not search?

Why can't I search for apps but can still use genius?

I have same issue. It will let me know to update apps.
But if I want to search an app my friend may have. Nothing comes up after typing it in the search bar.
Same with the featured apps or the star charts , nothing comes up.
Now I just updated my iPad and so far so good. But my iPhone 4S is the problem since upgrading to ios6.
What to do.....
Apple...... You shouldn't rush these things.... Take your time and make it right .....
Any ideas .. Guess we just have to wait for apple to fix the issue...

Apps stuck "waiting" after update - no solutions working

I have three apps that have been stuck "waiting" since my iPad crashed when they started installing (I think it was a full storage issue, which I have since resolved). I have tried all the solutions I have seen everywhere... fully rebooting the iPad, checking that there are no other pending downloads in the App Store or iTunes (in fact other updates have downloaded fine since), logging out of my Apple account, and even deleting the apps by going to Settings>General>Usage. After I deleted the apps, they stopped showing up in my list of apps in Settings>General>Usage>All Apps, but they still appear on my home screen and in the App Store as "waiting." I can't delete them from the home screen, because they stay grayed out and don't get an "x" on them when I make all the app icons wiggle. Any suggestions?

ellie_ellie wrote:
... and even deleting the apps by going to Settings>General>Usage.
I think that may be part of the problem right there. Rather than deleting an app through Settings, delete it by holding it until it wiggles and then tap the X to nuke it. But now that you've deleted it the other way, this no longer works.
I'd suggest adding the apps back to your device, either through syncing or re-download, then delete them as I described above if they are still stuck in an update download, and then re-download them again.

Safari, App Store, iTunes, System Updates all stopped working - what can I do?

I have an early 2011 Macbook Pro running Lion. I have not had any trouble with computer performance. I do have internet access and am using Firefox to type this. So my connection isn't a problem.
I've had this computer since February-ish, and I've never had problems. However, a few days ago, Safari just quit working. I can open it up fine and it loads with a slight hesitation. However, after about 10 seconds, it just stops loading. There is NO beachball. The loading just freezes.
So for instance, I can open Yahoo. It will open the page fine. But the second I try to load my mail or any other site, it just stops in the loading process. So again, the internet connection isn't the problem.
And I thought, "Oh, I should install the new updates! That might fix it." Wrong. System Updates just sits in the Install phase until I force close it. iTunes will not open (beachball). The App Store opens to a blank page. Even some games don't open.
However, Firefox is fine. And so are most of my other apps.
Will somebody pleeeeeeease help me? I hate this. haha Thanks.

Oh and I've tried restarting Safari (multiple times). I've shut down the computer, too. No help.

Juno webmail - my default homepage loads but am not able to read email. was fine before the 4.0b7 update. Still works in 3.6.12 so will use it from now on.

Just did the update. I use Juno for my email and have it set up as my homepage. I can navigate around the page but can't open personal folders or the email read pages at all.

Hi Dkakn:
To your question, Yes it works well when I go full analogic (bass to pre-amp, pre-amp to analog line-in of iMac, iMac line-in to Garabgeband).
Finally, I was able to talk with Apple Support. They confirm that theorically, this digital set-up should work. But it doesn't...
So I will take the long road. First I will use the S/PDIF audio optical Toslink output of a commercial DVD player and connect it to the 1/8 Line-In input jack of my iMac. This is to prove Yes or No if the iMac is able to take S/PDIF optical audio source. If the answer is NO, ouch! If the answer is yes, Good. Then I will attack the Electrical to Oprtical converter circuit.
I will let you know my finding. Thank you for your comments.
iMac 20¨2,16Hz Core Duo 1Go OS X 10.4.8 Mac OS X (10.4.8)
iMac 20¨2,16Hz Core Duo 1Go OS X 10.4.8 Mac OS X (10.4.8)

My microphone has stopped working for Siri, loudspeaker calls and FaceTime but I have apps that require a microphone that still work fine

Hi recently when using Siri, loudspeaker on calls and face time my mic has not been working. It is working fine on normal calls and on apps that I use to record with please can someone help resolve this issue

I'm having the same problem, and nobody on here seems to have a solution. If I do a factory restore, it works for a few weeks, but then the same problem creeps up again.

Leo 10.5.7 Update: Everything still working?

Haven't taken the leap because of reports of problems (mostly with MacBook/Pros) External HDDs not showing, printing problems, etc .
Anyone?

I have it installed for about an hour and it hasn't crashed yet. On a MacPro. I find with every update people usually have issues on their computers that owuld be good to fix but that they don't either know about them or never bother and then the update emphasizes these issues.
Anyway it looks good.

Oracle.apps.ar.hz.Location.update event still working

Similar Messages

Maybe you are looking for