Oracle Apps RAC TO RAC cloning from Netbackup(tape)

Hi,
I am doing RAC to RAC cloning on linux 5 following is the note id i follow
Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]
In this note step 4.2 we use adclone.pl to prepare the stage on source using "Method=Rman", i think this creates image backup of the database on source system
In step 5.1.4.1 we restore the database on target using the stage backup we took in source.
So, here i was thinking if it is possible to use Netbackup server (tapes) for "rmanstage=" parameter. Because we don't have that much disk space to accommodate backup and as with Rman duplicate database we directly connect to tape with auxiliary for cloning, Please let me know if we can use this process with the above adclone.pl
Thanks,
Tanveer Mohammed

Hi Tanveer,
Yes what you want is allowed, you are free to clone your DB using rman outside of the cloning utilities.
When you want this make sure you follow:
Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1] >> Section 8: Advanced Cloning Scenarios >> 8.1 Cloning the Database Separately
Regards,
Ronald Rademaker

Similar Messages

Migrate Oracle Apps 11.5.10.2 from Sun solaris to RHE Linux 32 bit.

We are migrating the Oracle Apps 11.5.10.2 from Solaris two node to Linux two node including the database Oracle 10.2.04 64 bit.
Since the applications only support 32 bit we are not able to store CM tier in a 64 bit Linux so with this considerations we are going with the below plan.
1. Install RHEL 5 as a 32 bit for two nodes ( One for DB/CM and FORMS/WEB)
2. Migrate the applications and DB from Solaris to Linux as the same node configuration that is
Node A:
Oracle DB 10.2.0.4 64 bit ( SUN oS 10 64bit) -> Oracle 10.2.0.5 32bit (RHEL 5 32 bit)
Oracle Apps CM 11.5.10.2 (SUN OS 10 64bit) -> Oracle apps CM 32 bit(RHEL 5 32 bit)
Node B:
Oracle apps 11.5.10.2 forms (sun OS 10) -> Oracle apps 11.5.10.2 forms ( RHEL 5 32bit)
Oracle apps WEB 11.5.10.2 (SUN OS 10) -> Oracle apps WEB 11.5.10.2 ( RHEL 5 32 bit).
Question : 1. Did you see any snag on this kind of migration
2. Any documentation to migrate the Oracle APPS 11i 10.2.0.4-64 bit database from Sun Solaris to oracle apps 11i 10.2.0.5-32 bit on Linux

Hi,
1. Did you see any snag on this kind of migrationWhy would you downgrade the db from 64 bit to 32 bit. As 32 Bit has lot of memory limitations.
You could keep the database on 64 bit for linux too.
2. Any documentation to migrate the Oracle APPS 11i 10.2.0.4-64 bit database from Sun Solaris to oracle apps 11i 10.2.0.5-32 bit on Linux Please see
Note 238276.1 - Migrating to Linux with Oracle Applications Release 11i
Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2 [ID 369693.1]
10g Export/Import Process for Oracle Applications Release 11i [ID 331221.1]
10g Release 2 Export/Import Process for Oracle Applications Release 11i [ID 362205.1]
Notice to Oracle E-Business Suite Customers: Correction to Export/Import Notes [ID 1055539.1]
EBS 11i Export/Import Fails On Admsc1020.sql Due To Missing Catmgdidcode.sql [ID 804665.1]
Thanks
Edited by: EBSDBA on Oct 25, 2011 5:30 PM

Cloning Oracle APPS Rac Database to Non Rac Databse

Hi all,
I have question.
Presently we are following RMAN duplicate database cloning from RAC asm to (non RAC)non asm database of size 1TB.
If suppose if our databse is 3TB or More. then is there method that we can minimize the cloning time. If so please let me know.
Thanks
Maverick

Hi;
Presently we are following RMAN duplicate database cloning from RAC asm to (non RAC)non asm database of size 1TB.
If suppose if our databse is 3TB or More. then is there method that we can minimize the cloning time. If so please let me know.We have 4 Tb RAC+ASM and we also follow same method. I belive there is no faster method, at least we can not find :)
Regard
Helios

Install oracle 9i rac access from both node problem

Hai,
Recently we have planned to move oracle 9i rac databases to new servers. Our current configuration is oracle 9i rac (9.2.0.4) and aix 5.3 with hacmp 5.4
mksysb backup has been taken from old machine and restored in the new machine. For oracle binarys, tar have been done and restored in the new machine.
Now after restoring the database, i am able to mount and open from the one server at a time. If i try to mount the database from second machine it is hanging. Kindly help us to solve the problem.

lmon registered with NM - instance id 1 (internal mem no 0)
After the above mentioned line, no other errors.

Installing Oracle APPS - Burning DVDs and installing from then!!!

Hi all,
I'm finishing the download of Oracle Application 11i (33GB) and i don't have space enough to create a staging area and install from this area. I want to install from DVDs. How can i do that? What files i burn in each DVD?? What is the order?? Can i unzip some of these downloaded files and burn a DVD and do it again until it finish??
Tks,
Paulo.

Hi,
I was install and unzip all DVD-s (9 pcs) into main HDD (60GB c:\stage12\)
and when I was run PROD installation I was modify path to
E:\ - external HDD with 250 GB !!! where I was creating instalation path
E:\oracle\prod.
(VIS installation need 250 GB min!)
I have and one more HDD (externall too!!) with 160GB
So, u need definitelly one more hdd or one with min 250 GB or 1/2 terabytes
whats the best solution!

PeopleSoft CRM 8.8 migration from DB2 UDB v8.1x to Oracle 9i Rac

Hello,
What is the best way to migrate a PeopleSoft CRM 8.8 application (PeopleTools 8.44) from DB2 UDB v8.1x to Oracle 9i Rac? From what I can tell I have either two options; 3rd party software or data mover. Is there a Workbench tool to do this job or is data mover my best bet.... Just an FYI...The database size is around 100GB...
Thanks

I would suggest that you get in contact with your Oracle account team with this request. We have groups inside Oracle with have experience migrating databases underneath PeopleSoft applications. They would be able to provide you with the best advice and assistance if required.
Donal

Migrating a Forms 6i custom application to Oracle Apps R12 custom bolt on

Hi,
I need to migrate an oracle forms custom application built in 6i to sit within oracle apps R12 (Forms 10g) and use Oracle Apps user authentication and session. It could become a custom bolt on to Oracle Apps and might be accessed from a custom responsibility in oracle applications.
a) How easy/difficult is this?
b) What are the challenges or things to look for to do this migration?
Thanks,
Ayyappa

979379 wrote:
Hi,
We have two node architecture for R12.1.1 on windows 2008 32 Bit. One node for Database and the other node for application.
As we are facing a lot of memory issues, we are planning to go for 64 Bit.
I Have already read the document
Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
The doc says in place OS upgrades are not supported....
So my question is...
While keeping the production, how can i migrate using the same servers. Coz my company does not want to buy new servers..
Please suggest.Complete all the steps in the doc for Rapid Clone and other steps, then take a backup of the files after you run preclone and create a trace file for the database. Once you have the backup ready, install a 64-bit version of the OS and install 11gR2 software and restore the files from the backup and complete the migration.
Thanks,
Hussein

Binding Error while calling Oracle Apps Adapter

Hi,
I have configured an oracle apps adapter to be called from the a BPEL Process in Jdev. The operation is to insert data in an oracle interface table.
I m getting the following error when the BPEL process is invoked from Console. Please suggest where could be the problem.
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>null
</code>
</part>
-<part name="summary">
<summary>
file:/C:/SOA/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_BPELProcess1_2.0_70717543df91cf3e80346845ccf64937.tmp/OraAppAdp.wsdl [ OraAppAdp_ptt::insert(RaCustomersInterfaceAllCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [OraAppAdp.RaCustomersInterfaceAll].
; nested exception is:
ORABPEL-11616
DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [OraAppAdp.RaCustomersInterfaceAll].
Caused by java.lang.NullPointerException.
</summary>
</part>
-<part name="detail">
<detail>null
</detail>
</part>
</bindingFault>
I have checked the oc4j-ra.xml , data-sources.xml and the connection factory on the enterprice manager.
Thanks
varun

Hi all,
i have exactly the same error and use the same applications and adapters.
i don't know what's wrong.
i thing the connection pool can open the connection to the database, but cannot write anythin in the database. maybe the Table cannot be found, but it's only a guess.
Any other idea or maybe a solution?
regrads

Reusing oracle apps forms

Hi,
Is there a way that we can add more functionality to an
already existitng Oracle Apps form without remaking it from
scrap?
Please let me know.......
TIA
vamsi

Yes, all of the fmb files are stored somewher in your APPL_TOP
tree, I think. They're out there though. Keep in mind that
there are specific recommended methods on changing the default
functionality of a form. Oracle will also not support your
modifications. There is a 5 day Oracle Education course that
specifically details how to accomplish what you're trying to
do. "11i Extend Oracle Applications: Forms", Class 14464.

Oracle Apps Forms Re-usability

Hi,
Is there a way that we can add more functionality to an
already existitng Oracle Apps form without remaking it from
scrap?
Please let me know.......
TIA
vamsi

If you do not want to modify and existing form but want to add functionality to the existing form and can not use
descriptive flexfields to add new functionality, you could use the custom.pll to accomplish this. Depending on
how many enhancements you will be adding using this method, you could impact performance across the
board due to the fact that the all forms execute the custom.pll to look for custom code. To find more information
about the custom.pll review the developers guide.( Oracle Applications Developer's Guide A75545-02)
Hop that helps.

Problem while cloning From RAC to Non RAC

Hi
Can any body help me to solve this problem occured while cloning my RAC database of EBS 12.06 to Non RAC
APPS Password : Log file located at /dump/rmsbkp/db/tech_st/10.2.0/appsutil/log/RMS_devmdb1/ApplyDBTier_03240738.log
- 50% completed Determining Source system database type ("single" or "rac").
RC-50004: Fatal: Error occurred in ApplyDatabase:
error in opening zip file
ERROR while running Apply...
Wed Mar 24 10:42:07 2010
ERROR: Failed to execute /dump/rmsbkp/rac/oracle/product/10.2.0/rac/appsutil/clone/bin/adclone.pl
Please check logfile.
oradev@devmdb1/dump/rmsbkp/rac/oracle/product/10.2.0/rac/appsutil/clone/bin$>
I Passed the following parameters :
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [devmdb1] :
Target Instance is RAC (y/n) [y] : n
Target System Database SID : RMS
Target System Base Directory : /dump/rmsbkp/rac/oracle/product/10.2.0/rac
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP's on the Target System [2] : 1
Target System DATA_TOP Directory 1 : /dump/rmsbkp/db/apps_st/data/RMS/datafile
Target System RDBMS ORACLE_HOME Directory [dump/rmsbkp/rac/oracle/product/10.2.0/rac/db/tech_st/10.2.0] : /dump/rmsbkp/db/tech_st/10.2.0
Do you want to preserve the Display [rmsmdb1:0.0] (y/n) ? : n
Target System Display [devmdb1:0.0] :
Do you want the the target system to have the same port values as the source system (y/n) [y] ? : y
RC-50220: Warning: Database Port: 1525 is not free. Unable to preserve the port settings from source system.
Target System Port Pool [0-99] : 7
and here are the errors from logfile:
/dump/rmsbkp/db/tech_st/10.2.0/appsutil/scripts/RMS_devmdb1/addlnctl.sh start RMS
You are running addlnctl.sh version 120.1
Logfile: /dump/rmsbkp/db/tech_st/10.2.0/appsutil/log/RMS_devmdb1/addlnctl.txt
Starting listener process RMS ...
Listener RMS has already been started.
addlnctl.sh: exiting with status 0
.end std out.
.end err out.
checking DB Connection...
DEBUG: checkDBConnection in()
ADX Database Utility
getConnection() -->
sDbHost : devmdb1
sDbDomain : mof.gov.kw
sDbPort : 1528
sDbSid : RMS
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@devmdb1.mof.gov.kw:1528:RMS
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devmdb1.mof.gov.kw)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=RMS)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devmdb1.mof.gov.kw)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=RMS.mof.gov.kw)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
DEBUG: checkDBConnection out()
Thanks for your help
Mohamed

Hi I passed the correct parameters and i reached the following:
/ 50% completed Determining Source system database type ("single" or "rac").
| 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Wed Mar 24 12:53:05 2010
ERROR: Failed to execute /dump/rmsbkp/RMS/rac/oracle/product/10.2.0/rac/appsutil/clone/bin/adclone.pl
Please check logfile.
In the logfile:
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : devmdb1
sDbDomain : mof.gov.kw
sDbPort : 1525
sDbSid : RMS
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@devmdb1.mof.gov.kw:1525:RMS
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HPUX-ia64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devmdb1.mof.gov.kw)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=RMS)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HPUX-ia64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devmdb1.mof.gov.kw)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=RMS.mof.gov.kw)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devmdb1.mof.gov.kw)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=RMS.mof.gov.kw)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Thanks
Mohamed

Putting Oracle Apps 11i on 10g RAC using VMware

Hello All,
I am building a Oracle Applications 11i on 10g RAC, using VMware..Since there aren't any docs I could find on internet explaining how to do this, I have come up with my own. I have combined the MEtalink doc:362135.1 and the docs describing building a 10gRAC "database" using VMware..I want to know if the below process is good enough to get the required results:
Steps:
-Install VMware on HOST m/c
-Configure 1st virtual m/c, say RAC1
-Install RHEL on RAC1
-Install 11i with 9i database on the local SCSI bus- SCSI 0:0
-Install VMware client tools
-Create a new ethernet adapter(for private interconnect) on RAC1
-Create shared disks on RAC1
-Partition the disks
-Add the disks as RAW devices in /etc/rawdevices
-Clone RAC1 to a new virtual m/c,say RAC2
-Delete the 11i apps directories from its local SCSI bus..since these would be redundant on RAC2
-Install Clusterware s/w on RAC1 using the same oraInventory that is used by the Applications 11i installation-
-Install the 10g DB software and create ASM instances using dbca
-Install Database componenets from 10g companion CD
-Upgrade CRS abd DB s/w to 10.2.0.4
-Upgrade the 9i database to 10g using dbua from the 10g ORACLE_HOME
-Convert the newly upgraded 10g databse to RAC using the rconfig tool
-Post migration steps for RAC
-Enable AutoConfig on the Applications Database tier
- Follow the "Establish Applications Environment for RAC" section from Doc:362135.1
-Configure PArallel Concurrent Processing(PCP)
Thanks,
Sandeep

(Considering that there are only 2 nodes the scenario the steps would be as follows:
1. Install RAC using the steps provided at the link:
http://oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
2.On RAC1 create a single instance of Oracle 11i (Both DB and Apps are on the same node)
3. Follow the steps outlined in the Note:362135.1
One thing to note is that the steps are the same whether the nodes are real or virtual.

Install Oracle 11G, RAC with VMWare, APPS R12, and OBIEE on one server?

Dear Experts,
I'm looking to upgrade my skills, and want to learn more of:
Oracle 11G, RAC, VMWare, APPS R12, and OBIEE
My server has two quad cores (8 CPU altogether) and 16 gigs of RAM.
Years ago, I took a shots at installing RAC on multiple servers and firewire.
One thing I remember was that after I installed RAC, I was not able to use the database unless I enabled all the RAC processes on the server. So, I was not able to just boot the database and use it in the traditional single server manner.
Which I will also want to do.
1) Does this symptom/aspect/characteristic of RAC install still exist?
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?
Thanks a lot!

Hi,
1) Does this symptom/aspect/characteristic of RAC install still exist?No.
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?For learning/traning/demonstration purpose you can Install all these software on same machine.
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?There will not be any conflicts. I would suggest you to select vmware or virtual box in order to configure all these sw's.
I have done such a configuration on my laptop with i7 Quad processor, 16GB RAM and 640 GB HDD.
I have Installed 2 node RAC, 2 Node ERP and all are running smoothly without any issues.
Refer:
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
thanks,
X A H E E R

Oracle APPs 11i on RAC

HI
Can have anybody having docs or metalink id for installationof oracle apps on RAC
Tks in advance.
hping Ur reply soon.

Virag Sharma wrote:
Addition to above also have look on <font face="tahoma,verdana,sans-serif" size="1" color="#000">following</font> docs on APPS + RAC
<A class=jive-link-external href="http://www.oracle.com/technology/products/applications/performance/Maximizing_Performance_EBS.ppt">http://www.oracle.com/technology/products/applications/performance/Maximizing_Performance_EBS.ppt</A>
<A class=jive-link-external href="http://www.oracle.com/technology/products/applications/sizing/Sizing_EBS_LongVersion.ppt">http://www.oracle.com/technology/products/applications/sizing/Sizing_EBS_LongVersion.ppt</A>
<A class=jive-link-external href="http://www.oracle.com/technology/products/applications/Events/OOW-2005/W504_Ahmed_Alomari.ppt">http://www.oracle.com/technology/products/applications/Events/OOW-2005/W504_Ahmed_Alomari.ppt</A>
Is there something wrong with the link? It cannot be opened, Is the link expired?

Siebel database migration from Sql Server 2005 to Oracle 11g RAC.

Hi,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?
The current configurations are:
Application : Siebel
database : SQL Server 2005
The hardware can be changed if needed. Can you please suggest the best approach ?
Thanks,
Naveen.
Edited by: Naveen Kumar C on Mar 18, 2011 9:10 PM
Edited by: Naveen Kumar C on Mar 18, 2011 11:44 PM

Hi Naveen,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?You will need much more which suggestions.
You will need a Siebel professional which has done this type of migration. Migrating the Database is not a task so hard, after migrating your environment should be functional and healthy it is usually the task problematic.
The hardware can be changed if needed. Can you please suggest the best approach ?We can recommend the minimum recommended, but this documentation already does, you need to do a analysis on your environment and ask a vendor Siebel tell the which is recommended for you and how to find the best "number" for you, in your case is very hard because everything changes.
Check this Step-by-Step
Migrating a Microsoft SQL Server Database to Oracle Database 11g
http://st-curriculum.oracle.com/obe/db/hol08/sqldev_migration/mssqlserver/migrate_microsoft_sqlserver_otn.htm
Regards,
Levi Pereira

Oracle Apps RAC TO RAC cloning from Netbackup(tape)

Similar Messages

Maybe you are looking for