Oracle Apps under LInux

Why i can't view my office's oracle apps (http://orahosts:8000/dev60cgi/f60cgi) using mandrake 10.0? I have 4 web browser (mozilla, netscape, mozilla firefox and konqueror) and 4 version of java:
jdk-1.5.0_01-fcs
j2re-1.4.1_07-fcs
j2re-1.4.2_07-fcs
jre-1.5.0_01-fcs
All the symboliclink like :
ln -fs /usr/java/j2re1.4.2_07/plugin/i386/ns610-gcc32/libjavaplugin_oji.so
i've been try (all the version of java) but i can't open my oracle apps like :
http://www.snpe.co.yu/images/sc_eng.png
or
http://www.oakland.edu/uts/banner/docs/inb/inb_doc.htm
anybody can help me?

Hi,
Please check the thread Re: Â£ is being reported in Oracle reports instead of £
Cheers!
Gautam

Similar Messages

Oracle 9iDS under Linux

I have a problem regarding Oracle 9iDS under Linux AS 2.1.
I have installed Oracle 9iDS under Linux AS 2.1.
When i run Form builder the forms builder runs in light blue. It is its deault behaviour or i have mede any mistake. Can i change this colour scheme?
My second question is regarding to Jinitator.
Tell me how to install and configure it.
Many Thanks in advance.
Regards,
M.Usman Latif

which browser you have configured..use netscape.., it will check for the jinitator, if it doesn't get it will go to sun java and down load for you..
default blue colour is right no issues..
good luck..

Does ds 52 run as 64 bit app under linux?

does ds 52 run as 64 bit app under linux?
Under 64 bit RH 3 AMD64 V20Z?
Under 64 bit RH 3 on Dell or other x86 64 bit hardware?
I've searched all over the public Sun site with no conclusive answer.
Thanks, Mike

No. 32 bit on Linux.

How to add patch in Oracle Payable under Linux

Hi All
I want to know how to apply a patch in Oracle under Linux environment. The problem is that I'm a Newbie in Oracle and i'm not a DBA and also i have little knowledge in Linux environment.
Apps: 11.5.9
OS: Linux x86
Patch : 7309767
Thanks
Edited by: 883454 on Sep 6, 2011 5:07 PM

Wrong category forum.

Installing Oracle Apps on Linux Virtual Machine, but need patch "6078836"

Hello Friend's,
Hope you are doing well...!
I start my EBS Training in a functional role in less than 10 day's.
My dilemma is that i am having a heck of a time installing Oracle Apps on my machine. As recommended in many blogs, i've installed a virtual machine environment and then installed Linux Version 5 Update 5. Before i begins installing Oracle apps, the last step is to go to my oracle support "mos" and install patch 6078836, which i can't access. It seems to me as if that one should either have a paid oracle support account or be a part of an organization/company that has one. I can't get past the sign in page to install this patch and no where in these blogs does it say this.
Does anyone have this patch or has access to it or any knowledge or idea as to where can i find this?
As a back up i've started downloading Oracle apps for a windows server machine as well, in case i am unable to download this patch at least i have a back up. And the bad thing about this is the fact that i am in India and the bandwidth here sucks even with a 2 MB plan. With these speeds this 50 GB download will take another 3 to 4 days. And time is of the utmost importance for me right now..
Any help or suggestions will be much appreciated..
Thank you all in advance and hope that you have a great weekend..!

Does anyone have this patch or has access to it or any knowledge or idea as to where can i find this?Even though any of us has the patch we are not supposed to mail it as this violates Oracle support agreement policy.
There is no other source to get the patch and most Oracle patches (if not all) can be downloaded from MOS website.
As a back up i've started downloading Oracle apps for a windows server machine as well, in case i am unable to download this patch at least i have a back up. And the bad thing about this is the fact that i am in India and the bandwidth here sucks even with a 2 MB plan. With these speeds this 50 GB download will take another 3 to 4 days. And time is of the utmost importance for me right now..
Any help or suggestions will be much appreciated..We cannot suggest anything about the download speed or the timing, and even if you had a CSI number it would take 3-5 days to get the Media Pack in case you log a SR and ask Oracle support to send you the pack.
Thanks,
Hussein

How to access Oracle Apps from Linux or Unix Client

I want to access Oracle Apps 11i from a linux client or Unix client, but I don't have jinit for linux or Unix
regards,
Jonathan

Hi,
That is not a problem just you can get in to linux inet browser and put the hostname.domainname.com:portnumber/OA_HTML/US/ICSINDEX.HTM
So that you can get the apps sign on screen will be launched up and available to access in to Oracle applications.
The work could be done in solaris browser and linux browser is possible.
Thanks and Regards
Riyaas
Oracle Applications DBA
[email protected]
Kuwait

Accessing oracle apps on linux

Hi,
I have installed apps 11.5.9 on Red Hat9.0.
I have mozilla 1.2.x browser installed.
When i try to access the apps by typing this URL "http://<hostname>.com:8000/dev60cgi/f60cgi?jinit_mimetype=application/x-java-vm" it is throwing up the error "NPX_PLUGIN_PATH variable is not defined." In one of the metalink posting they had mentioned to download jdk1.4.1 and to set the NPX_PLUGIN_PATH variable to jdk1.4.1/jre/plugin directory. I have followed the same steps but still it is giving the same error.
Any idea on how to resolve this
Thanks
Kanna

Hi Jiltin,
I am trying to install Oracle Apps version 11.5.9 vision in RHEL 3.
I an having problems in running the runwizard shell file since it gives the following error:
[root@max-srv-3 rapidwiz]# /tmp/RapidInstall/jre/Linux/1.1.8/bin/../lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Can you Please help
ANy help is appreciated
Thanks
Anshuman
I am trying to install Oracle Apps version 11.5.9 vision in RHEL 3.
I an having problems in running the runwizard shell file since it gives the following error:
[root@max-srv-3 rapidwiz]# /tmp/RapidInstall/jre/Linux/1.1.8/bin/../lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Can you Please help
Any help is appreciated
Thanks
Anshuman

Load Balancing for Oracle Apps in linux

Dear all,
I need anykind of information for load balancing (how to do it - architecture) for oracle application in linux environment.
Just for info, the database will be on linux too using RAC (3 machines). I have 4 machines to be use as application tier.
any kind of information will be appriciated.
You can also send it directly to my email account: [email protected] or [email protected]
best regards,
Yohan

I'm in the middle of doing this right now. There is a doc on metalink (233428.1) that details the process. I would highly recommend trying this in dev/test env first. Even though the instructions are very straight forward and not very complicated, I'm still having configuration issues.
Clint

Oracle App for Linux desktop

When will Oracle have an application available for the Linux desktop? The current apps require JInitiator which is Windows only.

You might want to post this as a topic in the Linux discussion forum: Generic Linux
Regards,
OTN

Font problems running a swing app under Linux

I have an application running well under the Win family (NT, 2000, etc.)... and it also runs well under a Linux Red Hat os... but in the linux environment I've observed the folloowing font errors displayed in the screen:
Font specified in font.properties not found [--symbol-medium-r-normal--*-%d-*-*-p-*-adobe-fontspecific]
this is a unexpected issue because I'm not setting any font in my code... How can I solve it ?
It's a Java or OS configuration problem ??

Here is a solution:-
Copy SYMBOL.TTF to /usr/java/jdk1.3.1_01/jre/lib/fonts or wherever.
Note the copy should have lower case name!
Do a chmod 444 symbol.ttf
I don't say where to get a copy from but you can imagine!!
Modify the file fonts.dir in the same directory as follows:
Change the first line by 1 ie if its 72 change to 73.
Insert the following line:
symbol.ttf -monotype-symbol-medium-r-normal--0-0-0-0-p-0-abode-fontspecific
You have to do the above as root of course.

Hindi font problem in oracle report under linux

I want to show hindi shusha fonts in oracle reports in pdf format on linux OS.

Exception in thread "main" java.lang.UnsatisfiedLinkError:
/tmp/OraInstall2009-01-05_07-29-26PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6:
cannot open shared object file: No such file or directoryInstall libXp*.rpm packages you'll find on disk 3 of Linux distro.

816 installer error under linux 7.1

Hi,
i tried to install oracle 816 under linux 7.1 . During the time of linking makefile. The following error occur :
Error in invoking target install of makefile /oraHome/network/lib/ins_net_client.mk
I have already added the 6.2 backward compatable libs(compat-eqcs,compat-glibc and compat-libs) and
export LD_ASSUME_KERNEL=2.2.5
execute the script
/usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
It still doesnt work !!! Why ???
CAN ANY BODY HELP !!! THANK A LOTS !!!
null

Read the other threads more carefully next time.
Alex Voitov posted this ftp site:
ftp://ftp.kernel.org/pub/software/libs/glibc/hjl/sdk/2.1/
click README.Oracle8i.
I also did what you did, but that was not enough, so I tried following the instructions in the README file mentioned above, and then I got oracle installed in Redhat 7.1 with no problems.
After you install Oracle, you may also want to follow the instructions below.
Posted by Kamal:
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>
Oracle Version 8.1.7
Linux Redhat 7.0
While installing Oracle you may encounter the error 'not able to connect to oracle'
during database creation. This is due to glibc package problem.
Please do the following
1. Install the compat-glibc RPM for 2.1.3.x
(This is on the Redhat 7.0 CDs)
2. cd to the directory where compat-glibc installed the files (for me it's
/usr/i386-glibc21-linux/lib).
3. Copy the following files to $ORACLE_HOME/lib:
libc-2.1.3.so
libpthread.so
libdl.so
ld-linux.so.2
For me, several of these are symbolic links, so you'll need to copy the target of the
symbolic link and rename it to the link name when you copy it to $ORACLE_HOME/lib.
For example, if ls -l shows:
ld-linux.so.2 -> ld-2.1.3.so
libc-2.1.3.so
libdl.so -> libdl.so.2
libpthread.so -> libpthread.so.0
Then you will:
cp ld-2.1.3.so $ORACLE_HOME/lib/ld-linux.so.2
cp libc-2.1.3.so $ORACLE_HOME/lib
cp libdl.so.2 $ORACLE_HOME/lib/libdl.so
cp libpthread.so.0 $ORACLE_HOME/lib/libpthread.so
4. Create a file in $ORACLE_HOME/lib called libc.so with the following contents (as a
single line):
GROUP ( /lib/libc-2.1.3.so /lib/ld-linux.so.2 /libc_nonshared.a )
Substitute the value of $ORACLE_HOME for and the location of the compat-glibc directory
for . For example:
My $ORACLE_HOME is:
/u01/app/oracle/product/8.1.7
and my compat-glibc directory is:
/usr/i386-glibc21-linux/lib
so the GROUP line looks like this for me:
GROUP (/u01/app/oracle/product/8.1.7/lib/libc-2.1.3.so
/u01/app/oracle/product/8.1.7/lib/ld-linux.so.2
/usr/i386-glibc21-linux/lib/libc_nonshared.a)
This is all one line.
5. cd $ORACLE_HOME/bin
6. Run the following command from the UNIX prompt:
relink all
All of the Oracle software, including the assitants, will work fine now.
I have used this technique for RedHat 7.0 with the 2.2.16 kernel.
Thanks to Richard Rankin for this simple and reliable method
Regards
Kamal
<HR></BLOCKQUOTE>

Oracle apps Trouble shoot part

Hi
I am new to the applications.
Oracle Apps on linux v4, wen i am trying to start application services scripts i am getting this problem -bash: ./adstrtal.sh permission denied wat could be the reason for this can a body answer this immediately.
TIA

Make sure that the user who is starting the application services has permission to run adstrtal.sh (and other scripts)
- Login as root
- cd $COMMON_TOP/admin/scripts/<SID_hostname>
- chown applmgr:dba *
- chmod 700 *
- Login as applmgr (Or su - applmgr)
- cd $COMMON_TOP/admin/scripts/<SID_hostname>
- adstrtal.sh apps/<apps_password>

RMAN backup Oracle 9ir2. Linux RedHat

Dear all,
Where can I find information i.e. how to do RMAN backup in Oracle 91r2 under Linux RedHat environment.
Thanks in advance
SL

See Oracle9i Recovery Manager User's Guide

ORACLE APPS migration from AIX to Linux

Dear All,
Please help me to understand the following scenario of ORACLE APP'S migration.
One of my client currently using Oracle APP'S ver 11.0.3 DB version 8.0.5 running on IBM AIX platform.
Currently three customized module under operation with 50 forms and reports.
Also some external application integrated with the current oracle financial 11.0.3.
The client is more interested to migrate their platform to linux based server.
They wants to move the current set up to the new version EBS along with the existing customized module. (My question is it possible to migrate the customized module to another platform. AIX to Linux)
If so , where i can find the right document to explore more idea of this scenario of migration.
Thanks in advance.
Regards,
Ram.
Dear all,
looking for experts help is this regard.
Thanks.
Ram
Message was edited by:
rambtn

ram,
I am going to do the similar upgrade with replatform at the same time. I collect the information from forum and finally get an indicator to how to do it. You need to read the "Upgrading the Oracle Applications", B19297-01
"Installing Oracle Applications" B19296-01 and
"Maintenance Utilities" B19300-01
The documentation mentioned the way for upgrade an 11.0 version of EBS to latest release including some pre-upgrade tasks including the database version upgrade to work with 11i, etc.
Hope this help.
mcken

Oracle Apps under LInux

Similar Messages

Maybe you are looking for