Oracle AS 10.1.2.3 - Application/Web Service 'not loaded'

I've successfully deployed my application against OAS 10.1.3.3 with no problems. Unfortunately, my target platform is 10.1.2.3 and I cannot upgrade.
When I deploy my application against OAS 10.1.2.3, it does not start/load. When I look at the application in the Enterprise Manager, I can see that it says "Status - not loaded" and "Auto Start - true".
Any suggestions as to why it would start okay in one and not in the other? The .ear file is the same for both of them.
Thanks!

The certification from metalink says for 10.1.2
OAS Ver DB Ver Cerftified?
10g (10.1.2.0.2) 11gR1 64-bit Certified
10g (10.1.2.0.2) 11gR1 64-bit Certified
For 10.1.3 the DB does not apply, but the Certificaction matrix xls file says that 10.1.3 is also certified for DB 11, you just need to check the issues or any related thing about it.
Link:[http://www.oracle.com/technology/software/products/ias/files/oracle%20fusion%20middleware%2011gr1%20%2811%201%201%201%200%29%20certification%20matrix.xls]
Greetings.

Similar Messages

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests

Hi,
We are using SCCM 2012 sp1 cu5 with one primary in the datacenter and a number of local DP's which are presently servicing 200 users, but will rise to 12,000. The Application Catalogue is installed on the primary server.
Once a day we get the above error and the message id is 8101, and sometimes a user will have to click on install twice, with the first one failing (the ones that fail are normally with dependencies which are quite large in size around 250MB)
I'm just wondering if this is something I should be concerned about, especially since we will be ramping up user numbers in the next few weeks, and if it could be down to volume of traffic, although the apps are downloaded to the users local DP.
Also, does this design look suitable to service this amount of users, or should I have local application catalogues? The WAN bandwith between the datacenter and the user sites has recently been upgraded and is pretty fast.
Thanks
Jaz

Hi Torsten,
Message ID is in the SMS_AWEBSVC_CONTROL_MANAGER status log and equates to "Application Web Service Manager detected AWEBSVC is not responding to HTTP requests. The http error is 12002.
Then, about 1 hr later in the same monitoring log I get Message ID 8102 "Application Web Service Control Manger detected AWEBSVC is responding to HTTP requests.
At the moment it isn't doing this very often, just once a day at different times normally, but it has also logged this a couple of times as well. I guess it may correspond to multiple users accessing the web portal at multiple times, but wondered if
anyone else has seen this behaviour and how it was fixed.
Thanks
Jaz

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, Kedar

Hi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar

Invoking a web service not created using oracle web service lib

Hi All,
I have a need to invoke my web service from oracle sql command. My web service not created using oracle web service library, but it is created using axis c++ libraries. Is it possible to do so,
Thanks in advance,
Regards,
Monica

In order to call out from the database process, is SQL (or PL/SQL) you need to generate some client code, that understand the details about the specific of the service you want to invoke and can produce the correct SOAP request. Once this proxy is uploaded in the Database, you can use it.
There is a set of Database Web services samples that should help you get started. You can also take a look at the developer's guide - see Developing a Web Service Client in the Database.
Hope it answers your question.
--eric

Web service not responding

Hi,
Issue - Web service not responding when we deploye the .ear file in prod instance. Same web service working fine in test instance.
We are using Oracle Enterprise Manager 10g server.
It is urgent for us.
Thanks,

If it is urgent, call support. Besides, this is the wrong forum as this is for Sun Application Server related issues.

Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specif

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified..
Editing the web.config and adding dependentAssembly didnt worked for me.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi,
Please try to do as follows:
1. Check your farm solution whether reference the Microsoft.SharePoint.dll. Or try to add the Microsoft.SharePoint.dll into the bin folder.
2. Execute the iisreset command.
3. Create a new farm solution and check whether the issue still occurs or not.
Best Regards
Dennis Guo
TechNet Community Support

Web Pages not loading on Mobile Devices

Browsing web pages not working on mobile devices
I have bt inifinity 2, from my laptop and mac (with same wifi connection) webpages load no problem, from my android tablet and iphone (with same wifi connection) web pages not loading. On these devices I can load youtube videos, and apps have connections/load data, it seems to be limited just to browsing webpages.
I have tried changing ssid for the 2 channels, I have tried disabling wifi on the router, and using apple time capsule as the router, everything seems to result in the same problem, you cannot browse web pages on mobile devices.
previously i had adsl from bt and didnt have these issues.
Solved!
Go to Solution.

Try turning Smart Setup off.
http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
Devices where there are known to be problems include:
Some Apple devices including iPhone 5 and Apple TV
some Android smartphones
Xbox<
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

Web View not loading in Cocoa Applescript application?

Hey guys...me again, and I need help, AGAIN, haha.
I found a tutorial for web views in Cocoa Applescript because I couldnt find it anywhere, but it wont load.
The web view does not display anything when the app is launching.
I am using Cocoa Applescript.
This is my AppDelegate.applescript I am using for the web view:
script AppDelegate
property parent : class "NSObject"
    property ourWebView : missing value (* This links the webview *)
          on applicationWillFinishLaunching_(aNotification)
-- tell ourWebView to setMainFrameURL_("http://tinyurl.com/RMHTML")
          end applicationWillFinishLaunching_
          on applicationShouldTerminate_(sender)
-- Insert code here to do any housekeeping before your application quits
                    return current application's NSTerminateNow
          end applicationShouldTerminate_
    on myButtonHandler_(sender)
        activate application "Terminal"
        tell application "System Events" to keystroke "Desktop/RecoverDevice"
        tell application "System Events" to keystroke return
        delay 1
        tell application "System Events" to keystroke "setenv auto-boot true"
        delay 1
        tell application "System Events" to keystroke return
        delay 1
        tell application "System Events" to keystroke "saveenv"
        delay 1
        tell application "System Events" to keystroke return
        delay 1
        tell application "System Events" to keystroke "reboot"
        delay 1
        tell application "System Events" to keystroke return
        delay 1
        tell application "Terminal"
            quit
        end tell
    end doMyButton_
    on myButtontwoHandler_(sender)
        open location "https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YF2DKZYRH6B GA"
    end doMyButton2_
end script
Whoever helps me will be thanked in my apps about page...
Thanks, Adam B

When I launch it...it says this:
2012-01-22 17:21:01.658 RecoverMe[96706:407] Error loading /Library/Application Support/SIMBL/Plugins/GreaseKit.bundle/Contents/MacOS/GreaseKit: dlopen(/Library/Application Support/SIMBL/Plugins/GreaseKit.bundle/Contents/MacOS/GreaseKit, 265): no suitable image found. Did find:
          /Library/Application Support/SIMBL/Plugins/GreaseKit.bundle/Contents/MacOS/GreaseKit: GC capability mismatch
Does that have anything to do with it not loading the webview?

Oracle EBS throwing exception while invoking the web service

Hi,
When I try to invoke the web service through SOAPUI it is working perfectly fine. however when I try to call it using a .net client. I am getting the below exception:
oracle.apps.fnd.soa.util.SOAException: ServiceProcessingError: System ErrorServiceGenerationError: Error in Creating Response MessageServiceGenerationError: Error in getting translated error messagenull.
Please help me.
Thanks,
Manish

Hi Manish,
Please check notes:
R12.1.1: ISG BPEL Calls Results in java.net.sockettimeoutexception & oracle.apps.fnd.soa.util.SOAException (Doc ID 1103755.1)
"Error in getting translated error messagenull" When Invoking a web service from SOAP UI (Doc ID 1507313.1)
Thanks &
Best Regards,
Asif

GP + Web Dynpro (Interface o Application)+ Web Services

Hi,
I have a scenario, in which I require to create a web dynpro, which will be utilized in a Callable Object, inside GP. This web dynpro will be like a form, which will be fed from 2 sources.
An external Web Service, that brings information from a website, spefically from a catalog.
Information filled by the user, in the fields of the form.
In short, the form is composed of information supplied by a Web Service and information completed by the user.
I would like to know if is possible to create a web dynpro, in NWDP, in order to be included in a Callable Object, inside a Worklfow in GP.
Regards.

Hi David,
yes, it is possible, you can create the callable object for the webdynpro and you put it into GP work flow..
Rgds
Srikanth

Web Services Not Working because wwv_flow_collections view is empty

Hello,
I followed this example to try and get a web service running in my Application:
http://apex.oracle.com/i/doc/advnc_rest_web_eg_2.htm
When I run the page and enter the zip code 43221 they recommend with a radius of 5, I get no results. When debugging and throwing the query into SQL Dev, I have no records in my wwv_flow_collections view. Looking at the tables that comprise the view, wwv_flow_collections$ and wwv_flow_collection_members$, these two tables would join on c.id = m.collection_id alone, but there are additional in-line selects involving the DUAL table that make the query return 0 records and therefore the view is empty. I've never messed with these views/tables, are these auto-populated by APEX? Can they be updated? Right now I cannot get any web services to work because of this. Here is the from clause for the wwv_flow_collections view:
FROM
wwv_flow_collections$ c,
wwv_flow_collection_members$ m
WHERE
c.session_id =
SELECT
v('SESSION')
FROM
dual
AND c.security_group_id =
SELECT
wwv_flow.get_sgid
FROM
dual
AND c.id = m.collection_id
AND c.flow_id =
SELECT
nv('FLOW_ID')
FROM
dual
Can anyone help? Thanks in advance!
John

John,
I have been working this week to set up the exact same thing and got the same empty result set that you have. In this case I believe it has nothing to do with APEX. I downloaded soapUI 4.0.1 which tests web services and used the WSDL described in the APEX Webservices tutorial for http://www.ignyte.com/webservices/ignyte.whatsshowing.webservice/moviefunctions.asmx?wsdl to create the same sample requests. It also returns no results.
So, I decided to use a different public WSDL and try to get it working. Here are my steps taken below:
BACKGROUND:
- I am using APEX 4.0 on an 11gR2 database, with ACLS set up for the APEX schema this app is using.
- First off, the site I used I just found through google. It is a currency conversion rate webservice. It is explained here: http://www.webservicex.net/CurrencyConvertor.asmx
- The WSDL is found here: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL
SETTING UP THE WEBSERVICE:
1. In a new APEX application I went to "*Shared Components*" -> "*Web Service References*" -> "*Create*" to create a new web service reference
2. Selected manual
3. Called the webservice CURRENCY_TEST
4. Set the URL to http://www.webservicex.net/CurrencyConvertor.asmx
5. Set the Action to http://www.webserviceX.NET/ConversionRate (Action can be found in the WSDL - showing a few lines below)
<pre class="jive-pre">
<wsdl:binding name="CurrencyConvertorSoap" type="tns:CurrencyConvertorSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="ConversionRate">
<soap:operation soapAction="*http://www.webserviceX.NET/ConversionRate*" style="document"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
</pre>
6. WSDL explains that the version is *1.1* in this case. (However, this same WSDL has the same operation for 1.2 so it probably would work)
7. No Authentication
8. soapUI 4.0.1 gave me the soap request which in this case is the following:
<pre class="jive-pre">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://www.webserviceX.NET/">
<soapenv:Header/>
<soapenv:Body>
<web:ConversionRate>
<web:FromCurrency>#FROM_CURRENCY#</web:FromCurrency>
<web:ToCurrency>#TO_CURRENCY#</web:ToCurrency>
</web:ConversionRate>
</soapenv:Body>
</soapenv:Envelope>
</pre>
9. Stored response in collection CURRENCY_COLLECTION
10. Saved my web service reference
11. Test the web service reference (you have to be on the web service references page and instead of the icon view of the report, use the list view. Click on the test icon to test the web service)
12. On the test page, change #FROM_CURRENCY# to USD (for US dollars) and #TO_CURRENCY# to EUR (Euros)
13. Click the test button and you should see a valid soap response with a currency rate within the ConversionRateResult tags
USING THE WEBSERVICE AND GETTING RESULTS:
1. Went back to the application and hit "*Create Page*" -> "*Form*" -> "*Form and Report on Web Service*"
2. Selected my CURRENCY_TEST web service reference
3. Next on the next page
4. For input parameters, left the defaults to create 2 inputs, From_Currency and To_Currency
5. Soap Style for this is Document (found in the WSDL as an attribute just after the soapAction attribute in the WSDL snippet above)
6. Message Format is Literal (Also found above in the wsdl:output for this operation under the use attribute)
7. XPATH is a bit complicated. In this case put */ConversionRateResponse* (I used the soapUI 4.0.1 to send the request and get back the soap response to see what the response tags would include and which path I'm going to)
8. Message Namespace is http://www.webserviceX.NET/ (which is also found in the response soap message - I'd really recommend a tool to test this outside of APEX)
9. For Parameter Names there is only one and it is ConversionRateResult (also found in the response soap message)
10. Finish and run the report.
OTHER GOTCHAS:
So I finally got this to work, but in my case I was querying a remedy webservice and the xml tags I get back are all xmlns:ns0 and all response tags prefaced with ns0:
In this case I had to after using the wizard go back and edit my query to change xmlns to xmlns:ns0 since the builder only assumes xmlns.
<pre class="jive-pre">
select extractValue(value(t),'/*/ns0:Assigned_Group','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Assigned_Group"
, extractValue(value(t),'/*/ns0:Assignee','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Assignee"
, extractValue(value(t),'/*/ns0:Resolution','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Resolution"
, extractValue(value(t),'/*/ns0:Status','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Status"
from wwv_flow_collections c,
table(xmlsequence(extract(c.xmltype001,'//ns0:HelpDesk_Query_ServiceResponse','xmlns:ns0="urn:HPD_IncidentInterface_WS"'))) t
where c.collection_name = 'INCIDENT_TEST'
</pre>
Good Luck!
Jonathon

Import Web Service not working

In the past I have successfully created a lvlib, to get Information from our ERP system (Dynamics NAV) via web service. I have used the LabVIEW import wizard for web services. Now we have exported another page of Dynamics NAV as a web service and I want to write a LabVIEW-Tool for this. But with a valid URL I get always an error
Validation failed. Possible Reasons are:
1. The URL does not exist or the WSDL is bad
2. Authentification is not OK
3. Proxy information is not correct.
I can communicate with a c# application. So, the reason must be in LabVIEW.
I have checked the import wizard again with the URL of my first first lvlib and the wizard gives the same error, but my lvlib is working well.
Regards
Dirk

Hello Dirk,
Which LabVIEW verison are you using? Depending on it I can propose you several solutions:
Have you take a look at this link? LabVIEW 2010: http://digital.ni.com/public.nsf/websearch/54DA5F6466B622A5862577BB0048E221?OpenDocument
I have this vi to fix your issue, but that was tested for LabVIEW 2010, you can try it with the version you are working with and keep me updated. I will send you a new file if needed.
Replace the attached VI file to have the fix. <LabVIEW 20xx>\vi.lib\Platform\WebService\Main Panel\Pages\Input WSDL\Main.vi
I hope this will solve your problem. Keep me posted!
Attachments:
Main.vi ‏38 KB

Web service not visible in web service navigator

Hi,
Whenever i deploy my web service application ear, i am not been able to see the corresponding web service in web service navigator or in web service perspective. For any other project its working fine. but for this specific project its not at all working.
I am not getting any warnings or errors while deploying. The deployment is successful. previously it was working fine but now suddenly stopped working after doing some changes in entity bean. I tried recreating the web service and also tried changing the server. Also i deleted and recreated ear file. but no help.
Any idea what exactly is wrong?

Hi Abhijeet,
I did got same error some time back. Go to visual Administrator and start the application if that does not work undeploy that application using Visual Administrator undeploy the deployed the Application, and then again deploy the application

SGE2000 Web Interface not loading

Getting a white screen in both frames of the web interface after logging in. Can't figure out why it won't load.
SW ver 3.0.0.18
Boot: 2.0.0.03
HW Ver: 00.00.01
Have tried using Easy Upgrade tool and get a warning : Did not find device information. Application will terminate.
Step1:Trying to open telnet connection...
Step1:Gathering information
show system--checking result for "show system unit 1-2
Step1:Type :
Step1:OID : 1.3.6.1.4.1.9.6.1.72.2000.2
Step1:Sys Name : Corporate
Step1:Location : ServerRoom
Step1:Sys Contct : IT
Step1:Mac-Address : f0:25:72:89:9e:e2
Has anyone else run into this issue? Any ideas how to resolve?

Hi parking, if the GUI will not load please try the following;
The same computer using IE, Firefox, Chrome,etc
Different computer with the mentioned browsers (preferably Windows 7 or older)
If none of these work, try to factory reset the switch as it sounds like the software is hung

Oracle AS 10.1.2.3 - Application/Web Service 'not loaded'

Similar Messages

Maybe you are looking for