Oracle ASM Configuration on Solaris Cluster - Oracle 11.2.0.3

Hi,
I want some clarifications!
I need to set Active and Passive Cluster settup on Solaris 10 SPARC Operating System, the HA software is Solaris Cluster and Oracle 11.2.0.3.
1) I understand "Single instance Oracle ASM is not supported with Oracle 11g release 2" so we need to go for Clustered ASM - is it required to use RAC framework in this case?
2) When i use the RAC framework, do i need to have license for RAC?
Am new to Oracle, any help is appreciated.
Regards,
Shashank

Similar Messages

Oracle ASM installation in Solaris Cluster

hello Experts,
Could someone please tell me how to install Oracle ASM in Solaris Cluster and how to integrate it into the cluster resources.
Details,
2 Nodes (Pri & Sec) solaris 10 SPARC 64 bit OS
solaris cluster 3.3 u5/11
Thanks & Regards

hi,
pls take a look at tihs doc
http://docs.oracle.com/cd/E18728_01/html/821-2678/gjcwv.html
regards,

ASM Configuration on Solaris

Hi,
I want to configure ASM on Solaris Oracle sparc-64 bit server with Netapp storage.
I am bit confused, when to create diskgroup using asmca. Because there is no asmlib package available. I cannot start grid installation because during installation it asking for disk (which i want to use from shared storage diskgroup).
Yuvraj

You should read the installation REQUIREMENTS for the platform you are using. You do NOT need to follow some other document to "mark" the devices for ASM. It is not necessary. I have NEVER done this, nor have I EVER used asmlib on Linux. IT IS NOT NECESSARY!!!!!!! Read the Oracle docs.
have sys admin configure devices to be visible for all nodes (stand-alone or cluster)
Make sure you use fdisk and use a partition that excludes the first 2 cylinders (0-1). Your partitions should start at cylinder 2. If you do not, ASM will overwrite the Solaris VTOC for the device rendering it unusable until you correctly partition the devices. The device should only have 2 partitions. Partition 1 is cylinder 0-1, and Partition 2 is cylinders 2-<last>. All ASM disks in a given DISKGROUP need to be EXACTLY the same size. You can have multiple diskgroups with different size devices, but that just makes managing your devices more complicated. A word of warning, in 11gR2, if you use a diskgroup with EXTERNAL REDUNDANCY, you will only get 1 voting file. The recommendation for a CRS diskgroup is to be made up of 3 x 2G devices for OCR/VOTING with NORMAL redundancy. This will create 3 voting files.
set correct ownership of grid:oinstall (or whatever:whatevergroup) for only partition 2 of these devices
Next make sure the grid user and the oracle rdbms user can both READ and WRITE to these partitions (rdbms user must be a member of the oinstall/whatever group).
during the install, make sure you change the ASM_DISKSTRING to point to these devices:
eg: /dev/whatever*p2. The installer will then mark the devices properly and create the diskgroup(s)
I don't know why so many people make this so hard. It is NOT that hard!!!!!
[Frame of reference: I have installed > 75 10g-11gR2 clusters.]
Edited by: onedbguru on Dec 9, 2012 1:12 PM

Oracle apps configuration required to install oracle lite database

Hi,
Can any one suggest me the oracle apps setups and configuration required for installing the oracle lite databse in my laptop.
The olite databse must sink with my existing oracle apps.
thanks in advance...

user596857 wrote:
Dear Experts, (I'm far from expert, but I possess enough shreds of knowledge to answer your question, so here goes. ;-) )
1a)
My server has Oracle version 11.1.0.6.0, but the matrix says it wants 11.1.0.7.
I should get a warning right?
Can I just proceed with the install, over-riding the warning?
1b)
If so, what is the procedure to install into the existing database?
It wasn't obvious in the (150 page) install docs. The EBS install delivers its own ORACLE_HOME for the database. There isn't an option to install into an existing database as far I know. The installer will ask where to put the new ORACLE_HOME for the EBS database. You might get a warning if you try to install to a pre-existing ORACLE_HOME, and I don't recommend ignoring that warning. The result will either be ugly immediately or, even worse, ugly later when it's harder to figure out why. ;-)
Do an upgrade?Won't really help. The ORACLE_HOME that's bundled with the installer usually comes with additional patches pre-installed, as well as EBS-friendly configuration options. You're much better off taking what it gives you so you can get down to the real fun of learning EBS. :-)
Or, do regular install, but not Express/Rapid Install?I recommend doing a Vision install for learning EBS.
Can I choose not to install the database software?Nope (unless my memory is really that bad), and there's no real benefit to doing so. All you'd save is a couple GB of disk, and as a percentage of the total install footprint of EBS, the database ORACLE_HOME is relatively tiny.
Regards,
John P.
http://only4left.jpiwowar.com

ORACLE ASM OR ZFS IN SOLARIS 11

ORACLE DBA EXPERTS
What kind of storage technology is recommended in order to implement an Oracle 11gr2 database in a Solaris 11 OS?
-Oracle ASM or the Solaris 11 ZFS filesystem.
Its any difference between the performance of both storage technologies?
Thanks for answer my questions and i wish to yours a very "Happy Hollydays".
Sincerely,
JOHN JAIRO GOMEZ LAVERDE

From what I understand Oracle recommends ASM. You cannot directly compare ASM with ZFS. ASM is a storage solution providing data management, availability and redundancy specific to Oracle. ZFS is an advanced file system. Whether you choose one over the other will depend on your storage requirements and knowledge.

Grid 11GR2:: [INS-20802] Oracle Net Configuration Assistant Failed

Hi Oracle DBA's.
I am trying to configure GRID comprising of 2 Nodes and the installation works without error all the way through to the end of the installer when it
errors out @ the *Oracle Net Configuration Assistant. I've built this before without hassle and cannot figure out what's causing the error, this time round.
2 Nodes (Redhat 5.4 64 Bit)
Linux jabal.example.com 2.6.18-128.el5 #1 SMP Wed Dec 17 11:41:38 EST 2008 x86_64 x86_64 x86_64 GNU/Linux
jabal.example.com & jebel.example.com are the nodes.
Both the servers are clean installs and updated with all the required dependencies satisfied.
Iptables & SElinux are disabled on both nodes.
I've read a few posts on the net pointing the problem to a miconfigured /etc/hosts file, i've included mine here below for some comment?
127.0.0.1          localhost.localdomain localhost
172.18.16.150     jabal.example.com jabal
172.18.16.151 jebel.example.com jebel
172.18.16.190     jabal-vip.example.com jabal-vip
172.18.16.191 jebel-vip.example.com jebel-vip
This is the log from the installer:
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.assistants.asm
INFO: Setting value to transient variable S_ASMMONITORPASSWORD
INFO: Setting value to transient variable S_ASMPASSWORD
INFO: Setting value to transient variable s_asmcaArgs
INFO: Setting value to transient variable s_ASMPasswordFlag
INFO: Setting value to transient variable s_ASMMonitorPasswordFlag
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - /u01/11.2.0/grid/cfgtoollogs
INFO:
The Runconfig command constructed is /u01/11.2.0/grid/oui/bin/runConfig.sh ORACLE_HOME=/u01/11.2.0/grid MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file /u01/11.2.0/grid/cfgtoollogs/configToolAllCommands
INFO: Since the option is to overwrite the existing /u01/11.2.0/grid/cfgtoollogs/configToolAllCommands file, backing it up
INFO: The backed up file name is /u01/11.2.0/grid/cfgtoollogs/configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.crs:oracle.crs:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@63e35108
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Parsing command line arguments:
INFO: Parameter "orahome" = /u01/11.2.0/grid
INFO: Parameter "orahnam" = Ora11g_gridinfrahome1
INFO: Parameter "instype" = typical
INFO: Parameter "inscomp" = client,oraclenet,javavm,server
INFO: Parameter "insprtcl" = tcp
INFO: Parameter "cfg" = local
INFO: Parameter "authadp" = NO_VALUE
INFO: Parameter "responsefile" = /u01/11.2.0/grid/network/install/netca_typ.rsp
INFO: Parameter "silent" = true
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: Profile configuration complete.
INFO: Profile configuration complete.
INFO: Problem in configuration: PRCN-2061 : Failed to add listener ora.LISTENER.lsnr
INFO: PRCN-2065 : Port(s) 1521 are not available on the nodes given
INFO: PRCN-2035 : Port 1521 is not available on node(s) or virtual host(s): jabal-vip,jebel-vip
INFO: Oracle Net Listener Startup:
INFO: Listener does not exists.
INFO: Check the trace file for details: /u01/app/oracle/cfgtoollogs/netca/trace_Ora11g_gridinfrahome1-10072412PM4248.log
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
And this is the log the above log refers to:
/u01/app/oracle/cfgtoollogs/netca/trace_Ora11g_gridinfrahome1-10072412PM4248.log
[root@jabal /]# tail -50 /u01/app/oracle/cfgtoollogs/netca/trace_Ora11g_gridinfrahome1-10072412PM4248.log
[main] [ 2010-07-24 12:42:53.568 SAST ] [CRSNative.getStat:1155] looking for following attributes:
[main] [ 2010-07-24 12:42:53.569 SAST ] [CRSNative.getStat:1157]           'USR_ORA_VIP'
[main] [ 2010-07-24 12:42:53.590 SAST ] [CRSNative.getStat:1170] crs found 1 attributes
[main] [ 2010-07-24 12:42:53.591 SAST ] [CRSNative.getStat:1180]      Name: 'USR_ORA_VIP'; Value: 'jebel-vip'
[main] [ 2010-07-24 12:42:53.592 SAST ] [CRSNative.getStatus:763] Looking for status: resource ora.jabal.vip
[main] [ 2010-07-24 12:42:53.615 SAST ] [CRSNativeResult.addRIAttr:139] addRIAttr: name 'ora.jabal.vip 1 1', 'STATE':'INTERMEDIATE'
[main] [ 2010-07-24 12:42:53.616 SAST ] [CRSNativeResult.addRIAttr:139] addRIAttr: name 'ora.jabal.vip 1 1', 'TARGET':'ONLINE'
[main] [ 2010-07-24 12:42:53.617 SAST ] [CRSNative.searchEntities:857] found 1 ntities
[main] [ 2010-07-24 12:42:53.618 SAST ] [CRSNative.getRIStatus:1374]      RI: 'ora.jabal.vip 1 1', state: 'INTERMEDIATE', target: 'ONLINE'
[main] [ 2010-07-24 12:42:53.620 SAST ] [CRSNative.getStatus:789] Resource: ora.jabal.vip, status: INTERMEDIATE_ONLINE
[main] [ 2010-07-24 12:42:53.621 SAST ] [CRSNative.getStat:1153] About to call crs stat: name: ora.jabal.vip, type: 1, node: null
[main] [ 2010-07-24 12:42:53.622 SAST ] [CRSNative.getStat:1155] looking for following attributes:
[main] [ 2010-07-24 12:42:53.622 SAST ] [CRSNative.getStat:1157]           'USR_ORA_VIP'
[main] [ 2010-07-24 12:42:53.647 SAST ] [CRSNative.getStat:1170] crs found 1 attributes
[main] [ 2010-07-24 12:42:53.647 SAST ] [CRSNative.getStat:1180]      Name: 'USR_ORA_VIP'; Value: 'jabal-vip'
[main] [ 2010-07-24 12:42:53.648 SAST ] [VIPImpl.address:442] vipName=jabal-vip
[main] [ 2010-07-24 12:42:53.649 SAST ] [CRSNative.getStatus:763] Looking for status: resource ora.jebel.vip
[main] [ 2010-07-24 12:42:53.672 SAST ] [CRSNativeResult.addRIAttr:139] addRIAttr: name 'ora.jebel.vip 1 1', 'STATE':'INTERMEDIATE'
[main] [ 2010-07-24 12:42:53.673 SAST ] [CRSNativeResult.addRIAttr:139] addRIAttr: name 'ora.jebel.vip 1 1', 'TARGET':'ONLINE'
[main] [ 2010-07-24 12:42:53.674 SAST ] [CRSNative.searchEntities:857] found 1 ntities
[main] [ 2010-07-24 12:42:53.675 SAST ] [CRSNative.getRIStatus:1374]      RI: 'ora.jebel.vip 1 1', state: 'INTERMEDIATE', target: 'ONLINE'
[main] [ 2010-07-24 12:42:53.675 SAST ] [CRSNative.getStatus:789] Resource: ora.jebel.vip, status: INTERMEDIATE_ONLINE
[main] [ 2010-07-24 12:42:53.676 SAST ] [CRSNative.getStat:1153] About to call crs stat: name: ora.jebel.vip, type: 1, node: null
[main] [ 2010-07-24 12:42:53.677 SAST ] [CRSNative.getStat:1155] looking for following attributes:
[main] [ 2010-07-24 12:42:53.677 SAST ] [CRSNative.getStat:1157]           'USR_ORA_VIP'
[main] [ 2010-07-24 12:42:53.704 SAST ] [CRSNative.getStat:1170] crs found 1 attributes
[main] [ 2010-07-24 12:42:53.705 SAST ] [CRSNative.getStat:1180]      Name: 'USR_ORA_VIP'; Value: 'jebel-vip'
[main] [ 2010-07-24 12:42:53.705 SAST ] [VIPImpl.address:442] vipName=jebel-vip
[main] [ 2010-07-24 12:42:53.707 SAST ] [PortAvailableCommand.execute:136] Check port on node(s): jabal-vip jebel-vip
[main] [ 2010-07-24 12:42:53.709 SAST ] [PortAvailableCommand.execute:149] Port 1521 is not available on node jabal-vip
[main] [ 2010-07-24 12:42:53.710 SAST ] [PortAvailableCommand.execute:149] Port 1521 is not available on node jebel-vip
[main] [ 2010-07-24 12:42:53.719 SAST ] [NodeAppsFactoryImpl.checkPortHelper:1525] port=1521 availability status=false across nodeList=jabal-vip,jebel-vip
[main] [ 2010-07-24 12:42:53.722 SAST ] [ConfigureListenerOPS.saveListener:1318] retry = false
[main] [ 2010-07-24 12:42:53.723 SAST ] [ConfigureListenerOPS.startOrStopListener:1622] Starting listener LISTENER...
[main] [ 2010-07-24 12:42:53.751 SAST ] [CRSNativeResult.addComp:162] add comp: name ora.LISTENER.lsnr, rc 210, msg CRS-0210: Could not find resource 'ora.LISTENER.lsnr'.
[main] [ 2010-07-24 12:42:53.752 SAST ] [CRSNative.isEntityRegistered:672] entity: ora.LISTENER.lsnr, type: 1, registered: false
[main] [ 2010-07-24 12:42:53.753 SAST ] [ConfigureListenerOPS.startOrStopListener:1644] PRCR-1001 : Resource ora.LISTENER.lsnr does not exist
PRCR-1001 : Resource ora.LISTENER.lsnr does not exist
     at oracle.cluster.impl.common.SoftwareModuleImpl.crsResource(SoftwareModuleImpl.java:778)
     at oracle.cluster.impl.nodeapps.ListenerImpl.crsResource(ListenerImpl.java:1201)
     at oracle.cluster.impl.nodeapps.NodeAppsFactoryImpl.getListener(NodeAppsFactoryImpl.java:920)
     at oracle.cluster.nodeapps.NodeAppsFactory.getListener(NodeAppsFactory.java:1348)
     at oracle.sysman.assistants.util.hasi.HAListenerUtils.startListener(HAListenerUtils.java:259)
     at oracle.net.ca.ConfigureListener.startListener(ConfigureListener.java:1515)
     at oracle.net.ca.ConfigureListenerOPS.startOrStopListener(ConfigureListenerOPS.java:1630)
     at oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:256)
     at oracle.net.ca.ConfigureListenerOPS.typicalConfigure(ConfigureListenerOPS.java:289)
     at oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
     at oracle.net.ca.InitialSetup.<init>(NetCA.java:4159)
     at oracle.net.ca.NetCA.main(NetCA.java:405)
Any pointers in the right direction would be great, as i cannot pick up a lead from the logs above ?
Regards
Ronald

I had a similar issue to this. It turned out the tns listener had already started on the VIP address on the first node.
[root@rac-1 home]# netstat -nltp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name
tcp        0      0 172.25.15.132:1521          0.0.0.0:*                   LISTEN      18253/tnslsnr
[root@rac-1 home]# Not sure how this got started since the only program I had run was the Grid installer, however killing this process and retrying the Oracle Net Configuration Assistant step allowed me to continue.

Oracle Net Configuration Assistant failed. While Installing

HI ,
I was getting an Error while installing Oracle11g on Redhat linux 5.4.
The Error was
'Oracle Net Configuration Assistant failed.'
I am attaching the Last few lines of the Install Actions Files ,
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - /soa/oracle/oracle/product/11.2.0/dbhome_1/cfgtoollogs
INFO:
The Runconfig command constructed is /soa/oracle/oracle/product/11.2.0/dbhome_1/oui/bin/runConfig.sh ORACLE_HOME=/soa/oracle/oracle/product/11.2.0/dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file /soa/oracle/oracle/product/11.2.0/dbhome_1/cfgtoollogs/configToolAllCommands
INFO: Since the option is to overwrite the existing /soa/oracle/oracle/product/11.2.0/dbhome_1/cfgtoollogs/configToolAllCommands file, backing it up
INFO: The backed up file name is /soa/oracle/oracle/product/11.2.0/dbhome_1/cfgtoollogs/configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@11d6591
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Parsing command line arguments:
INFO: Parameter "orahome" = /soa/oracle/oracle/product/11.2.0/dbhome_1
INFO: Parameter "orahnam" = OraDb11g_home1
INFO: Parameter "instype" = typical
INFO: Parameter "inscomp" = client,oraclenet,javavm,server,ano
INFO: Parameter "insprtcl" = tcp
INFO: Parameter "cfg" = local
INFO: Parameter "authadp" = NO_VALUE
INFO: Parameter "responsefile" = /soa/oracle/oracle/product/11.2.0/dbhome_1/network/install/netca_typ.rsp
INFO: Parameter "silent" = true
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: Profile configuration complete.
INFO: Oracle Net Listener Startup:
INFO: Running Listener Control:
INFO: /soa/oracle/oracle/product/11.2.0/dbhome_1/bin/lsnrctl start LISTENER
INFO: Listener Control complete.
INFO: Listener start failed.
**INFO: Check the trace file for details: /soa/oracle/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-1209172PM0322.log**
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
Iam Attaching the last few lines of /soa/oracle/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-1209172PM0322.log
[main] [ 2012-09-17 14:03:25.027 IST ] [RuntimeExec.runCommand:161] RunTimeExec: output>
[main] [ 2012-09-17 14:03:25.027 IST ] [RuntimeExec.runCommand:170] RunTimeExec: error>
[main] [ 2012-09-17 14:03:25.028 IST ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[main] [ 2012-09-17 14:03:25.028 IST ] [CmdToolUtil.doexecute:372] nativeSystem.runRemoteExecCmd failed. Command = /soa/oracle/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = [] env = null
[main] [ 2012-09-17 14:03:25.028 IST ] [HAUtils.isHASConfigured:349] Ignoring exception in isHASConfigured: PRCT-1011 : Failed to run "getcrshome"
[main] [ 2012-09-17 14:03:25.028 IST ] [HAUtils.isHASConfigured:350] oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:423)
oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:345)
oracle.net.ca.ConfigureListener.isHASConfigured(ConfigureListener.java:1428)
oracle.net.ca.ConfigureListener.isHASRunning(ConfigureListener.java:1450)
oracle.net.ca.ConfigureListener.validateListenerName(ConfigureListener.java:1697)
oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:169)
oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
oracle.net.ca.InitialSetup.<init>(NetCA.java:4159)
oracle.net.ca.NetCA.main(NetCA.java:405)
[main] [ 2012-09-17 14:03:25.029 IST ] [ConfigureListener.isHASConfigured:1436] Is Oracle Restart configured: false
[main] [ 2012-09-17 14:03:25.029 IST ] [ConfigureListener.isHASRunning:1465] Is Oracle Restart running: false
[main] [ 2012-09-17 14:03:25.029 IST ] [ConfigureListener.typicalConfigure:201] Checking for free port in range: 1521-1540
[main] [ 2012-09-17 14:03:25.029 IST ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
[main] [ 2012-09-17 14:03:25.030 IST ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2012-09-17 14:03:25.030 IST ] [ConfigureListener.isPortFree:1025] Local host IP address: vx111a.example.com/172.16.11.175
[main] [ 2012-09-17 14:03:25.030 IST ] [ConfigureListener.isPortFree:1027] Local host name: vx111a.example.com
[main] [ 2012-09-17 14:03:25.031 IST ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: vx111a.example.com/172.16.11.175
[main] [ 2012-09-17 14:03:25.033 IST ] [ConfigureListener.isPortFree:1042] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.033 IST ] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2012-09-17 14:03:25.033 IST ] [ConfigureListener.isPortFree:1059] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.033 IST ] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port:1521
[main] [ 2012-09-17 14:03:25.033 IST ] [ConfigureListener.isPortFree:1068] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.034 IST ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: true
[main] [ 2012-09-17 14:03:25.034 IST ] [ConfigureListener.typicalConfigure:208] Using port: 1521
[main] [ 2012-09-17 14:03:25.039 IST ] [ConfigureListener.setListenerParam:1779] Setting ADR_BASE_LISTENER: /soa/oracle/oracle
[main] [ 2012-09-17 14:03:25.040 IST ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
[main] [ 2012-09-17 14:03:25.041 IST ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2012-09-17 14:03:25.041 IST ] [ConfigureListener.isPortFree:1025] Local host IP address: vx111a.example.com/172.16.11.175
[main] [ 2012-09-17 14:03:25.041 IST ] [ConfigureListener.isPortFree:1027] Local host name: vx111a.example.com
[main] [ 2012-09-17 14:03:25.041 IST ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: vx111a.example.com/172.16.11.175
[main] [ 2012-09-17 14:03:25.042 IST ] [ConfigureListener.isPortFree:1042] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.042 IST ] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2012-09-17 14:03:25.042 IST ] [ConfigureListener.isPortFree:1059] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.042 IST ] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port:1521
[main] [ 2012-09-17 14:03:25.043 IST ] [ConfigureListener.isPortFree:1068] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.043 IST ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: true
Please Soft Me Out.

user9030848 wrote:
Where can i find that listener log file ?Zoltan gave you the specific, one-time answer.
The generalized, learn-to-self-help answer is:
Use your os's search utility to fiind any file you want. In the case of Linux, that utility is called 'find'. Instructions on how to use it are all over the net, and the official documentation for all Linux utilties installed on your system can be read by using the 'man' command (ie: 'man find').
To tie the general to the specific, you would use
find / -name listener.log Or, faster and fewer error messages
find $ORACLE_HOME -name listener.log

Oracle Net Configuration Assistant Install Failure

I'm installing 11G R2 on Fedora 12.
The Installation got to 95% and displayed the following error
[INS-20802] Oracle Net Configuration Assistant Failed
Naturally it says to have a look at the InstallActions log which then says to check the trace log. The last 100 or so lines from the trace log is below, can anyone assist as to where I can start to troubleshoot this problem?
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Parsing command line arguments:
INFO: Parameter "orahome" = /u01/app/oracle/product/11.2.0/dbhome_1
INFO: Parameter "orahnam" = OraDb11g_home1
INFO: Parameter "instype" = typical
INFO: Parameter "inscomp" = client,oraclenet,javavm,server,ano
INFO: Parameter "insprtcl" = tcp
INFO: Parameter "cfg" = local
INFO: Parameter "authadp" = NO_VALUE
INFO: Parameter "responsefile" = /u01/app/oracle/product/11.2.0/dbhome_1/network/install/netca_typ.rsp
INFO: Parameter "silent" = true
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: Profile configuration complete.
INFO: Oracle Net Listener Startup:
INFO: Running Listener Control:
INFO: /u01/app/oracle/product/11.2.0/dbhome_1/bin/lsnrctl start LISTENER
INFO: Listener Control complete.
INFO: Listener start failed.
INFO: Check the trace file for details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-10040811AM5707.log
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
[root@fedora1 logs]# cd /u01/app/oracle/cfgtoollogs/netca
[root@fedora1 netca]# ls
netca_OraDb11g_home1-10040811AM5707.log trace_OraDb11g_home1-10040811AM5707.log
[root@fedora1 netca]# cat trace_OraDb11g_home1-10040811AM5707.log
[main] [ 2010-04-08 11:57:08.620 EST ] [NetCALogger.initTrace:203] Oracle Net Configuration Assistant: 10040811AM5707
[main] [ 2010-04-08 11:57:08.637 EST ] [NetCALogger.initTrace:204] Oracle Home: /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-04-08 11:57:08.638 EST ] [NetCALogger.initTrace:205] Oracle Base: /u01/app/oracle
[main] [ 2010-04-08 11:57:08.638 EST ] [NetCALogger.initTrace:206] Oracle Home Name: OraDb11g_home1
[main] [ 2010-04-08 11:57:08.717 EST ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[main] [ 2010-04-08 11:57:08.718 EST ] [HAUtils.<init>:188] oui location /u01/app/oraInventory/ContentsXML
[main] [ 2010-04-08 11:57:08.741 EST ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
[main] [ 2010-04-08 11:57:08.742 EST ] [Version.isPre:285] isPre.java: Returning FALSE
[main] [ 2010-04-08 11:57:08.759 EST ] [OCR.loadLibrary:308]
Inside constructor of OCR
[main] [ 2010-04-08 11:57:08.776 EST ] [OCR.loadLibrary:316] Going to load the ocr library
[main] [ 2010-04-08 11:57:08.777 EST ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
[main] [ 2010-04-08 11:57:08.784 EST ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
[main] [ 2010-04-08 11:57:08.784 EST ] [Library.load:254] Loading library /u01/app/oracle/product/11.2.0/dbhome_1/lib/libsrvmocr11.so
[main] [ 2010-04-08 11:57:08.975 EST ] [OCR.loadLibrary:318] loaded ocr libraries
[main] [ 2010-04-08 11:57:08.975 EST ] [OCR.isCluster:939] Calling OCRNative for isCluster()
[main] [ 2010-04-08 11:57:09.051 EST ] [OCR.isCluster:943] OCR Result status = true
[main] [ 2010-04-08 11:57:09.052 EST ] [OCR.isCluster:955] Bolean result = false
[main] [ 2010-04-08 11:57:09.055 EST ] [CmdlineArgs.<init>:110] Initializing variables array...
[main] [ 2010-04-08 11:57:09.055 EST ] [CmdlineArgs.<init>:116] Initializing NetProperties...
[main] [ 2010-04-08 11:57:09.063 EST ] [CmdlineArgs.initArgs:133] Initializing command line arguments...
[main] [ 2010-04-08 11:57:09.063 EST ] [CmdlineArgs.parseLogParam:290] Parsing /log argument...
[main] [ 2010-04-08 11:57:09.079 EST ] [CmdlineArgs.parseLogParam:345] Returning Log File = null
[main] [ 2010-04-08 11:57:09.083 EST ] [CmdlineArgs.setOraArgs:236] Setting Oracle arguments...
[main] [ 2010-04-08 11:57:09.083 EST ] [CmdlineArgs.setOraArgs:240] Passed Oracle Home = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-04-08 11:57:09.083 EST ] [CmdlineArgs.setOraArgs:243] Read Oracle Home = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-04-08 11:57:09.084 EST ] [CmdlineArgs.setOraArgs:246] Read Oracle Home ID =
[main] [ 2010-04-08 11:57:09.084 EST ] [CmdlineArgs.setOraArgs:249] Read Oracle Home Name = null
[main] [ 2010-04-08 11:57:09.084 EST ] [CmdlineArgs.compareOraHome:183] Comparing Oracle Homes ...
[main] [ 2010-04-08 11:57:09.084 EST ] [CmdlineArgs.compareOraHome:184] Oracle Home 1 = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-04-08 11:57:09.085 EST ] [CmdlineArgs.compareOraHome:185] Oracle Home 2 = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-04-08 11:57:09.085 EST ] [CmdlineArgs.compareOraHome:224] Returning true
[main] [ 2010-04-08 11:57:09.085 EST ] [InitialSetup.configureOPS:4504] Cluster mode is OFF
[main] [ 2010-04-08 11:57:09.085 EST ] [InitialSetup.<init>:4028] TNS_ADMIN is: null
[main] [ 2010-04-08 11:57:09.092 EST ] [OPSUtil.getHomeVersion:446] Inside getHomeVersion...
[main] [ 2010-04-08 11:57:09.092 EST ] [OPSUtil.getHomeVersion:447] oracleHome = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-04-08 11:57:09.092 EST ] [OPSUtil.getHomeVersion:451] oracle.sysman.assistants.util.OracleHome Object = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-04-08 11:57:09.092 EST ] [OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: null
[main] [ 2010-04-08 11:57:09.096 EST ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[main] [ 2010-04-08 11:57:09.096 EST ] [OracleHome.getVersion:896] Homeinfo /u01/app/oracle/product/11.2.0/dbhome_1,1
[main] [ 2010-04-08 11:57:09.449 EST ] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0
[main] [ 2010-04-08 11:57:09.449 EST ] [OracleHome.getVersion:943] Current Version From Inventory: 11.2.0.1.0
[main] [ 2010-04-08 11:57:09.449 EST ] [OracleHome.getVersion:948] using sqlplus: /u01/app/oracle/product/11.2.0/dbhome_1/bin/sqlplus
[main] [ 2010-04-08 11:57:09.450 EST ] [OPSUtil.getHomeVersion:452] returning oracleHome Version = 11.2.0.1.0
[main] [ 2010-04-08 11:57:09.450 EST ] [OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: 11.2.0.1.0
[main] [ 2010-04-08 11:57:09.450 EST ] [OracleHome.getVersion:943] Current Version From Inventory: 11.2.0.1.0
[main] [ 2010-04-08 11:57:09.450 EST ] [OracleHome.getVersion:948] using sqlplus: /u01/app/oracle/product/11.2.0/dbhome_1/bin/sqlplus
[main] [ 2010-04-08 11:57:09.450 EST ] [InitialSetup.<init>:4041] Admin location is: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin
[main] [ 2010-04-08 11:57:24.074 EST ] [ConfigureProfile.setProfileParam:136] Setting NAMES.DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
[main] [ 2010-04-08 11:57:24.100 EST ] [ConfigureProfile.setProfileParam:136] Setting ADR_BASE: /u01/app/oracle
[main] [ 2010-04-08 11:57:24.107 EST ] [HAUtils.getHASHome:583] Oracle home from system properties: /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-04-08 11:57:24.108 EST ] [HAUtils.getCRSHome:540] Getting configured CRS/HAS home for Oracle home ( /u01/app/oracle/product/11.2.0/dbhome_1 ) ...
[main] [ 2010-04-08 11:57:24.109 EST ] [GETCRSHOMEUtil.<init>:76] Toolname: getcrshome --- Tool location: /u01/app/oracle/product/11.2.0/dbhome_1/srvm/adminTool dependencies: [Ljava.lang.String;@472d48
[main] [ 2010-04-08 11:57:24.110 EST ] [NativeSystem.isCmdScv:471] isCmdScv: cmd=[]
[main] [ 2010-04-08 11:57:24.111 EST ] [RuntimeExec.runCommand:75] Calling Runtime.exec() with the command
[main] [ 2010-04-08 11:57:24.111 EST ] [RuntimeExec.runCommand:77] /bin/sh
[main] [ 2010-04-08 11:57:24.111 EST ] [RuntimeExec.runCommand:77] -c
[main] [ 2010-04-08 11:57:24.113 EST ] [RuntimeExec.runCommand:77] /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome
[Thread-2] [ 2010-04-08 11:57:24.126 EST ] [StreamReader.run:61] In StreamReader.run
[main] [ 2010-04-08 11:57:24.126 EST ] [RuntimeExec.runCommand:142] runCommand: Waiting for the process
[Thread-1] [ 2010-04-08 11:57:24.130 EST ] [StreamReader.run:61] In StreamReader.run
[Thread-2] [ 2010-04-08 11:57:24.253 EST ] [StreamReader.run:65] ERROR>/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: Permission denied
[main] [ 2010-04-08 11:57:24.253 EST ] [RuntimeExec.runCommand:144] runCommand: process returns 127
[main] [ 2010-04-08 11:57:24.254 EST ] [RuntimeExec.runCommand:161] RunTimeExec: output>
[main] [ 2010-04-08 11:57:24.254 EST ] [RuntimeExec.runCommand:170] RunTimeExec: error>
[main] [ 2010-04-08 11:57:24.254 EST ] [RuntimeExec.runCommand:173] /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: Permission denied
[main] [ 2010-04-08 11:57:24.254 EST ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[main] [ 2010-04-08 11:57:24.281 EST ] [CmdToolUtil.doexecute:372] nativeSystem.runRemoteExecCmd failed. Command = /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = [] env = null
[main] [ 2010-04-08 11:57:24.345 EST ] [HAUtils.isHASConfigured:349] Ignoring exception in isHASConfigured: PRCT-1011 : Failed to run "getcrshome"
[main] [ 2010-04-08 11:57:24.345 EST ] [HAUtils.isHASConfigured:350] oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:423)
oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:345)
oracle.net.ca.InitialSetup.checkHAConfiguration(NetCA.java:4653)
oracle.net.ca.InitialSetup.<init>(NetCA.java:4075)
oracle.net.ca.NetCA.main(NetCA.java:405)
[main] [ 2010-04-08 11:57:24.346 EST ] [InitialSetup.checkHAConfiguration:4691] HA Server is NOT configured.
[main] [ 2010-04-08 11:57:24.348 EST ] [NetCAResponseFile.<init>:68] Response file initialized: /u01/app/oracle/product/11.2.0/dbhome_1/network/install/netca_typ.rsp
[main] [ 2010-04-08 11:57:24.350 EST ] [NetCAResponseFile.getInstalledComponents:107] Installed components from response file: server, net8, javavm
[main] [ 2010-04-08 11:57:24.350 EST ] [NetCAResponseFile.getVirtualHost:164] Virtual Host from response file: null
[main] [ 2010-04-08 11:57:24.350 EST ] [SilentConfigure.performSilentConfigure:174] Typical profile configuration.
[main] [ 2010-04-08 11:57:24.351 EST ] [ConfigureProfile.setProfileParam:136] Setting NAMES.DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
[main] [ 2010-04-08 11:57:24.351 EST ] [ConfigureProfile.setProfileParam:136] Setting ADR_BASE: /u01/app/oracle
[main] [ 2010-04-08 11:57:24.353 EST ] [SilentConfigure.performSilentConfigure:182] Typical listener configuration.
[main] [ 2010-04-08 11:57:24.423 EST ] [ConfigureListener.isHASConfigured:1425] Calling SRVM api to check if Oracle Restart is configured ...
[main] [ 2010-04-08 11:57:24.423 EST ] [HAUtils.getHASHome:583] Oracle home from system properties: /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-04-08 11:57:24.424 EST ] [HAUtils.getCRSHome:540] Getting configured CRS/HAS home for Oracle home ( /u01/app/oracle/product/11.2.0/dbhome_1 ) ...
[main] [ 2010-04-08 11:57:24.424 EST ] [GETCRSHOMEUtil.<init>:76] Toolname: getcrshome --- Tool location: /u01/app/oracle/product/11.2.0/dbhome_1/srvm/adminTool dependencies: [Ljava.lang.String;@472d48
[main] [ 2010-04-08 11:57:24.424 EST ] [NativeSystem.isCmdScv:471] isCmdScv: cmd=[]
[main] [ 2010-04-08 11:57:24.424 EST ] [RuntimeExec.runCommand:75] Calling Runtime.exec() with the command
[main] [ 2010-04-08 11:57:24.425 EST ] [RuntimeExec.runCommand:77] /bin/sh
[main] [ 2010-04-08 11:57:24.426 EST ] [RuntimeExec.runCommand:77] -c
[main] [ 2010-04-08 11:57:24.426 EST ] [RuntimeExec.runCommand:77] /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome
[Thread-4] [ 2010-04-08 11:57:24.439 EST ] [StreamReader.run:61] In StreamReader.run
[Thread-4] [ 2010-04-08 11:57:24.439 EST ] [StreamReader.run:65] ERROR>/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: Permission denied
[main] [ 2010-04-08 11:57:24.440 EST ] [RuntimeExec.runCommand:142] runCommand: Waiting for the process
[main] [ 2010-04-08 11:57:24.440 EST ] [RuntimeExec.runCommand:144] runCommand: process returns 127
[Thread-3] [ 2010-04-08 11:57:24.440 EST ] [StreamReader.run:61] In StreamReader.run
[main] [ 2010-04-08 11:57:24.441 EST ] [RuntimeExec.runCommand:161] RunTimeExec: output>
[main] [ 2010-04-08 11:57:24.441 EST ] [RuntimeExec.runCommand:170] RunTimeExec: error>
[main] [ 2010-04-08 11:57:24.441 EST ] [RuntimeExec.runCommand:173] /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: Permission denied
[main] [ 2010-04-08 11:57:24.443 EST ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[main] [ 2010-04-08 11:57:24.443 EST ] [CmdToolUtil.doexecute:372] nativeSystem.runRemoteExecCmd failed. Command = /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = [] env = null
[main] [ 2010-04-08 11:57:24.444 EST ] [HAUtils.isHASConfigured:349] Ignoring exception in isHASConfigured: PRCT-1011 : Failed to run "getcrshome"
[main] [ 2010-04-08 11:57:24.444 EST ] [HAUtils.isHASConfigured:350] oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:423)
oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:345)
oracle.net.ca.ConfigureListener.isHASConfigured(ConfigureListener.java:1428)
oracle.net.ca.ConfigureListener.isHASRunning(ConfigureListener.java:1450)
oracle.net.ca.ConfigureListener.validateListenerName(ConfigureListener.java:1697)
oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:169)
oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
oracle.net.ca.InitialSetup.<init>(NetCA.java:4159)
oracle.net.ca.NetCA.main(NetCA.java:405)
[main] [ 2010-04-08 11:57:24.444 EST ] [ConfigureListener.isHASConfigured:1436] Is Oracle Restart configured: false
[main] [ 2010-04-08 11:57:24.445 EST ] [ConfigureListener.isHASRunning:1465] Is Oracle Restart running: false
[main] [ 2010-04-08 11:57:24.445 EST ] [ConfigureListener.typicalConfigure:201] Checking for free port in range: 1521-1540
[main] [ 2010-04-08 11:57:24.445 EST ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
[main] [ 2010-04-08 11:57:24.446 EST ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2010-04-08 11:57:24.446 EST ] [ConfigureListener.isPortFree:1025] Local host IP address: fedora1/127.0.0.1
[main] [ 2010-04-08 11:57:24.446 EST ] [ConfigureListener.isPortFree:1027] Local host name: fedora1
[main] [ 2010-04-08 11:57:24.447 EST ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: fedora1/127.0.0.1
[main] [ 2010-04-08 11:57:24.467 EST ] [ConfigureListener.isPortFree:1042] Created ServerSocket successfully.
[main] [ 2010-04-08 11:57:24.468 EST ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: fedora1/0:0:0:0:0:0:0:1
[main] [ 2010-04-08 11:57:24.468 EST ] [ConfigureListener.isPortFree:1042] Created ServerSocket successfully.
[main] [ 2010-04-08 11:57:24.468 EST ] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2010-04-08 11:57:24.469 EST ] [ConfigureListener.isPortFree:1059] Created ServerSocket successfully.
[main] [ 2010-04-08 11:57:24.469 EST ] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port:1521
[main] [ 2010-04-08 11:57:24.469 EST ] [ConfigureListener.isPortFree:1068] Created ServerSocket successfully.
[main] [ 2010-04-08 11:57:24.469 EST ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: true
[main] [ 2010-04-08 11:57:24.470 EST ] [ConfigureListener.typicalConfigure:208] Using port: 1521
[main] [ 2010-04-08 11:57:24.500 EST ] [ConfigureListener.setListenerParam:1779] Setting ADR_BASE_LISTENER: /u01/app/oracle
[main] [ 2010-04-08 11:57:24.502 EST ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
[main] [ 2010-04-08 11:57:24.502 EST ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2010-04-08 11:57:24.503 EST ] [ConfigureListener.isPortFree:1025] Local host IP address: fedora1/127.0.0.1
[main] [ 2010-04-08 11:57:24.503 EST ] [ConfigureListener.isPortFree:1027] Local host name: fedora1
[main] [ 2010-04-08 11:57:24.503 EST ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: fedora1/127.0.0.1
[main] [ 2010-04-08 11:57:24.504 EST ] [ConfigureListener.isPortFree:1042] Created ServerSocket successfully.
[main] [ 2010-04-08 11:57:24.504 EST ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: fedora1/0:0:0:0:0:0:0:1
[main] [ 2010-04-08 11:57:24.504 EST ] [ConfigureListener.isPortFree:1042] Created ServerSocket successfully.
[main] [ 2010-04-08 11:57:24.505 EST ] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2010-04-08 11:57:24.505 EST ] [ConfigureListener.isPortFree:1059] Created ServerSocket successfully.
[main] [ 2010-04-08 11:57:24.505 EST ] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port:1521
[main] [ 2010-04-08 11:57:24.505 EST ] [ConfigureListener.isPortFree:1068] Created ServerSocket successfully.
[main] [ 2010-04-08 11:57:24.505 EST ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: true
[root@fedora1 netca]#

DeOracle wrote:
What Linux versions are supported by Oracle?Oracle did a very very strange thing. They put that kind of information into something called 'Documentation', and generally made that available at http://docs.oracle.com (or searchable at http://tahiti.oracle.com)
In fact, they put that specific information into a document called "Oracle® Database Installation Guide" into a chapter with the unnatural title of "Oracle Database Preinstallation Requirements" at a section called "Operating System Requirements" which you can find at http://download.oracle.com/docs/cd/E11882_01/install.112/e10840/pre_install.htm#CHDFFBIF
>
Where do I obtain OEL?That's a tough one. I'll give you some alternatives:
- http://linux.oracle.com which provides a 'Download' link.
- http://download.oracle.com and search for Linux which provides a link.
- http://edelivery.oracle.com (the official supported download location for ALL Oracle s/w) and follow the 'Linux' link
- http://oss.oracle.com (especially to find Yum and other related things)
Out of desperation: http://en.wikipedia.org/wiki/Oracle_Enterprise_Linux
And as a last resort, http://lmgtfy.com/?q=oracle+enterprise+linux
Hope that helps

INS-20802 Oracle net configuration assistant failed on windows server 2003 R2

Hi all,
            I have windows server 2003 r2 installed on VM and tried installing oracle database 11g r2.
But got Oracle net configuration assistant failed. Below is the log
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = C:\oracle\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 0
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@c0d228
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1257f0e
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Created config job for Oracle Net Configuration Assistant
INFO: Created config job for Oracle Database Configuration Assistant
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1ae9cec
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeToolsInAggregate action performed
INFO: Exiting ConfigClient.executeToolsInAggregate method
INFO: Calling event ConfigToolsExecuted
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@140de18
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1b52041
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.1
INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@b970f5
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.1
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@969e08
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@6155e3
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.2
INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1e976fd
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.2
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration

Hi Srini,
       The issue is resolved. Thanks for your response.
    The issue is, windows 2003 server is 32 bit and I am trying to install 64 bit 11g database. I tried installing 32 bit 11g database. Before that I have cleared the traces of virtual box in my host system and reinstalled it and tried. It worked out.
Thanks
Sunil

Oracle 11g oui-25031 error (oracle database configuration assistant)

Configuration assistant "Oracle Database Configuration Assistant" failed
The "/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any)
before executing the same.
The "/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script
->/oracle/app/oracle/product/11.1.0/db_1/oui/bin/runConfig.sh ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 MODE=perform ACTION=configure RERUN=false
runConfig.sh ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 MODE=perform ACTION=configure RERUN=false
->
oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: 인벤토리 포인터 위치 /etc/oraInst.loc을(를) 읽을 수 없거나 존재하지 않습니다.
at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiIns tallAreaControl.java:1717)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:292)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:231)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:180)
at oracle.sysman.oii.oiic.OiicRunConfig.loadInventory(OiicRunConfig.java :278)
at oracle.sysman.oii.oiic.OiicRunConfig.main(OiicRunConfig.java:1004)
Exception in thread "main" java.lang.NullPointerException
at oracle.sysman.oii.oiic.OiicRunConfig.getArgumentList(OiicRunConfig.ja va:519)
at oracle.sysman.oii.oiic.OiicRunConfig.main(OiicRunConfig.java:1007)
hi!
i install oracle database 11g 1R .
error occur during installing oracle database.
please solve it!!

OS version is fedora 3.
uname -a: Linux db9.sangjicom.ac.kr 2.6.9-1.667 #1 Tue Nov 2 14:41:25 EST 2004 i686 i686 i386 GNU/Linux
ORACLE_HOME is registred ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 in bash_profile.
Inventory is /oracle/app/Inventory.

Configuration assistant "Oracle Database Configuration Assistant" failed

I install oracle 10g on HP UX 11.23. I got this error :
hecking for PHSS_33278; found Not found.     Failed <<<<
Checking for PHSS_33279; found Not found.     Failed <<<<
Checking for PHSS_33277; found Not found.     Failed <<<<
Checking for PHSS_33279; found Not found.     Failed <<<<
, my first question :
can i pass this step, ?
after all, my installation form is okey, but everything change become nightmare.
I installation failed on Configuration Assistant :
Configuration assistant "Oracle Database Configuration Assistant" failed
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.
1. check the details panel on the configuration assistant screen to see the error resulting in the failures
2. fix the errors causing these failures
3. select the failed assistants and click the retry button to retry the
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------

But i still get this error. Do you have solution for this ?
I installation failed on Configuration Assistant :+
Configuration assistant "Oracle Database Configuration Assistant" failed+
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.+
*1. check the details panel on the configuration assistant screen to see the error resulting in the failures*
*2. fix the errors causing these failures*
*3. select the failed assistants and click the retry button to retry the*
Configuration assistant "Oracle Database Configuration Assistant" failed The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------+
Edited by: user9198604 on Feb 25, 2010 3:37 AM

Solaris 10 , oracle 102_64 bit and WAS Kernel 7.00

i run the top command
load averages: 1.12, 1.14, 1.15;                    up 0+02:39:01   18:50:27
117 processes: 115 sleeping, 2 on cpu
CPU states: 93.0% idle, 6.3% user, 0.6% kernel, 0.0% iowait, 0.0% swap
Memory: 10G phys mem, 5719M free mem, 36G swap, 36G free swap
   PID USERNAME LWP PRI NICE SIZE   RES STATE    TIME    CPU COMMAND
6010 sd2adm     1   0    0 5199M 884M cpu    138:24 94.97% disp+work
5746 sd2adm     1 57    0   13M 3848K sleep    1:41 2.17% saposcol
5348 orasd2     1 59    0 1289M 1199M sleep    1:08 1.96% oracle
i am having trouble one of the disp+work process is runing like 94% ..this problem has started in the Sun10 version or oracle 10G , earlier in Solaris 9 , oracle 9206 no problem all below 1%.
Overall very poor system performance.

Hi
I checked I think It is normal behaviour some times.
When u change priority it will use large chunk of memory for high Priority or consult ur sys admin for CPU load balancing. CPU load balancing can be done through some utilities also.
Some times changing priority works for me.
Let me know if u need any further help.
Regards
Vinod

Oracle Net Configuration Assistant Failed(see details...) 11g on Fedora 7

I am a newbie in a Linux and Oracle ,so
can somebody help me to solve this problem, i've done everything from
this site : http://www.oracle-base.com/articles/11g/OracleDB11gR1InstallationOnFedora7.php
and i've got this error :
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /home/oracle/app/oracle/product/11.1.0/db_1/bin/netca /orahome /home/oracle/app/oracle/product/11.1.0/db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /home/oracle/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = /home/oracle/app/oracle/product/11.1.0/db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = /home/oracle/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x00b6fdd3, pid=7312, tid=3086751952
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# C [libc.so.6+0x6ddd3] index+0x63
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/home/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
thx

Let's assume your software installation was successful. Even if no database was created at this time. Check the Oracle Universal Installer inventory to verify this. At this time you should verify your connectivity, as previously suggested, verify the hosts file properly describes the hostname.domainname and the simple hostname. Verify the security is disabled, according to the install guide you have referred to.
Then check the environment variables PATH, ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH are properly set and issue the commands:
1) netmgr, this will be used to configure the listener and the tnsnames.ora file, you could use the netca if you want, this is a subset of netmgr.
2) dbca, this will assist you in creating the database. there you will find an option to setup enterprise manager, ensure you have it selected so the EM repository is created.
3) You won't find isqlplus on 11g, but the regular sqlplus CLI is available
~ Madrid

[INS-20802] Oracle Database Configuration Assistant failed

I am trying to install Oracle 11g R2 on my windows 7 Professional, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
And the final pop up winow says:
Database configuration Assistant:Info
*"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
*"[INS-20802] Oracle Database Configuration Assistant failed"*
Details:
Cause:- The plug-in failed in its perform method
Action:- Refer to the logs or contact Oracle Support Services.
Following are the last few lines of the log file. Can anyone please help me to fix this problem?
          Oracle Advanced Security 11.2.0.1.0
          Oracle Internet Directory Client 11.2.0.1.0
          HAS Files for DB 11.2.0.1.0
          Oracle Net Listener 11.2.0.1.0
          Oracle Net Services 11.2.0.1.0
          Oracle Text 11.2.0.1.0
          Oracle Database 11g 11.2.0.1.0
          Oracle COM Automation Feature 11.2.0.1.0
          Oracle OLAP 11.2.0.1.0
          Oracle Spatial 11.2.0.1.0
          Oracle Partitioning 11.2.0.1.0
          Enterprise Edition Options 11.2.0.1.0
          Oracle Database 11g 11.2.0.1.0
INFO: OiicSaveInvWCCE:After saving the inventory. This is an Install session.
INFO: SaveInvWCCE JRE files in Scratch :0
INFO: Aggregate Name as given in the action for additional utility tools: oracle.rdbms.util
INFO: Aggregate Location as given in the action for additional utility tools: C:\app\User\product\11.2.0\dbhome_1/install/config
INFO: checking if the file C:\app\User\product\11.2.0\dbhome_1/install/config\oracle.rdbms.util.xml is present?
INFO: Can proceed with additional utility processes ? : true
INFO: Copying C:\app\User\product\11.2.0\dbhome_1\install\config\oracle.rdbms.util.xml to C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.rdbms.util.1_0_0_0_0.xml with the permissions og-rwx
INFO: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.rdbms.util instancePath: inventory\ContentsXML\ConfigXML\
INFO: cf session for OH: C:/app/User/product/11.2.0/dbhome_1\ TL Aggr: [oracle.rdbms.util] instancePath: inventory\ContentsXML\ConfigXML\
INFO: No of Tools: 1
INFO: Starting to execute the additional tools
INFO: Executing utility tool: ADR Setup Utility
INFO: Executing utility tool: ADR Setup Utility
INFO: Command = C:\Windows\system32\cmd /c call C:\app\User\product\11.2.0\dbhome_1/bin/diagsetup.bat basedir=C:\app\User oraclehome=C:\app\User\product\11.2.0\dbhome_1
INFO: Successfully executed utility tool: ADR Setup Utility
INFO: Successfully executed utility tool: ADR Setup Utility
INFO: All the tools have been executed Successfully
INFO: Complete execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch :0
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Configuration Manager
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: HAS Common Files
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Netca Client
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Database 11g
INFO: The Top level Aggreage File = C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.server.11_2_0_1_0.xml
INFO: OUI_CAPlugIn is not found in XML
INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
INFO: processing tool: Launch browser
INFO: removing plugin invocation for: Launch browseras it doesnt support clone mode
INFO: removing plugin invocation for: Launch browseras it doesnt support add node mode
INFO: Namespace prefix 'agg' used but not declared.
INFO: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.server instancePath: inventory\ContentsXML\ConfigXML\
INFO: cf session for OH: C:/app/User/product/11.2.0/dbhome_1\ TL Aggr: [oracle.server] instancePath: inventory\ContentsXML\ConfigXML\
INFO: aggr ref length : 6
INFO: cf session hashcode: 1847125318
INFO: cf session saved with key: OraDb11g_home1 oracle.server
INFO: cf session is ok
INFO: created and saved cf session for oh: OraDb11g_home1
INFO: passing params to cf
INFO: Handling the storing of variables for aggr name oracle.sysman.ccr
INFO: This variable s_OPSNodeInfoString is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_createResponseFile is not added to the global context map
INFO: This variable s_ps is not added to the global context map
INFO: This variable s_oraName is not added to the global context map
INFO: This variable s_ccrJarDestination is not added to the global context map
INFO: This variable b_localInstall is not added to the global context map
INFO: This variable b_doConfigCCR is not added to the global context map
INFO: This variable b_ccrUpgrade is not added to the global context map
INFO: This variable s_rspFilePath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: for oracle.has.common no aggregate found by cf: no configuration
INFO: Handling the storing of variables for aggr name oracle.assistants.netca.client
INFO: This variable s_swingallName is not added to the global context map
INFO: This variable s_shareName is not added to the global context map
INFO: This variable s_runtimeLib is not added to the global context map
INFO: This variable s_runTimeJar is not added to the global context map
INFO: This variable s_responseFileName is not added to the global context map
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_netcfgName is not added to the global context map
INFO: This variable s_netcahelpName is not added to the global context map
INFO: This variable s_netcaUpgradeFlag is not added to the global context map
INFO: This variable s_netcaClass is not added to the global context map
INFO: This variable s_netCA_Args is not added to the global context map
INFO: This variable s_netCAInstalledProtocols is not added to the global context map
INFO: This variable s_netAPIName is not added to the global context map
INFO: This variable s_ldapclnt9 is not added to the global context map
INFO: This variable s_ldapclnt11 is not added to the global context map
INFO: This variable s_ldapclnt10 is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable s_jreJarFile is not added to the global context map
INFO: This variable s_jreJar is not added to the global context map
INFO: This variable s_jewtName is not added to the global context map
INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
INFO: This variable s_icebrowserName is not added to the global context map
INFO: This variable s_helpName is not added to the global context map
INFO: This variable s_ewtcompatName is not added to the global context map
INFO: This variable s_ewtName is not added to the global context map
INFO: This variable s_ewtFile is not added to the global context map
INFO: This variable s_ewtCompat is not added to the global context map
INFO: This variable s_cfgMethod is not added to the global context map
INFO: This variable s_caHelpZhTwJar is not added to the global context map
INFO: This variable s_caHelpZhCnJar is not added to the global context map
INFO: This variable s_caHelpPtBRJar is not added to the global context map
INFO: This variable s_caHelpKoJar is not added to the global context map
INFO: This variable s_caHelpJar is not added to the global context map
INFO: This variable s_caHelpJaJar is not added to the global context map
INFO: This variable s_caHelpItJar is not added to the global context map
INFO: This variable s_caHelpFrJar is not added to the global context map
INFO: This variable s_caHelpEsJar is not added to the global context map
INFO: This variable s_caHelpDeJar is not added to the global context map
INFO: This variable s_authAdaptors is not added to the global context map
INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
INFO: This variable b_net8ServerInstalling is not added to the global context map
INFO: This variable b_javavmIsInstalling is not added to the global context map
INFO: This variable b_isWindows is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_cmanIsInstalling is not added to the global context map
INFO: This variable b_anoIsInstalling is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibDir is not added to the global context map
INFO: This variable s_opsmJlib is not added to the global context map
INFO: This variable s_ntwkTools is not added to the global context map
INFO: This variable s_netjlibDir is not added to the global context map
INFO: This variable s_netcahelpLocation is not added to the global context map
INFO: This variable s_netcaJlibDir is not added to the global context map
INFO: This variable s_netcaDocDir is not added to the global context map
INFO: This variable s_netPropertiesFile is not added to the global context map
INFO: This variable s_netCA is not added to the global context map
INFO: This variable s_net8caFileToInstantiate is not added to the global context map
INFO: This variable s_jre15Location is not added to the global context map
INFO: This variable s_jlibDir is not added to the global context map
INFO: This variable s_inventoryPrereqOui is not added to the global context map
INFO: This variable s_emdwLibDir is not added to the global context map
INFO: This variable s_caHelpDir is not added to the global context map
INFO: This variable s_assistantJlibDir is not added to the global context map
INFO: This variable s_JavaFlag is not added to the global context map
INFO: This variable b_isOPS is not added to the global context map
INFO: This variable s_windowsCommandLine is not added to the global context map
INFO: This variable s_net8caExecutable is not added to the global context map
INFO: This variable s_netcaUserDirArg is not added to the global context map
INFO: This variable s_installTypeForNetCA is not added to the global context map
INFO: This variable s_netcaSilentFlag is not added to the global context map
INFO: This variable s_netCAInstalledProducts is not added to the global context map
INFO: This variable s_netcaClasspath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the global context map
INFO: This variable s_serverInstallType is not added to the global context map
INFO: This variable s_platform is not added to the global context map
INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_nlsLang is not added to the global context map
INFO: This variable s_emailServer is not added to the global context map
INFO: This variable s_emailAddress is not added to the global context map
INFO: This variable s_cfgtyperet is not added to the global context map
INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable n_uploadInterval is not added to the global context map
INFO: This variable localhost is not added to the global context map
INFO: This variable b_launchTools is not added to the global context map
INFO: This variable b_launchBrowser is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_centralConsole is not added to the global context map
INFO: This variable USE_HTTP_PROXY is not added to the global context map
INFO: This variable USE_DB_CONSOLE is not added to the global context map
INFO: This variable SET_CONSOLE_MODE is not added to the global context map
INFO: This variable SA_SETUP is not added to the global context map
INFO: This variable OC4JLOC is not added to the global context map
INFO: This variable NO_PC_MODE is not added to the global context map
INFO: This variable LOGGING_LEVEL is not added to the global context map
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: Handling the storing of variables for aggr name oracle.assistants.server
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable pn_dboffset is not added to the global context map
INFO: This variable cs_swingName is not added to the global context map
INFO: This variable cs_komodoName is not added to the global context map
INFO: This variable cs_kodiakName is not added to the global context map
INFO: This variable cs_jewtName is not added to the global context map
INFO: This variable cs_iceBrowserName is not added to the global context map
INFO: This variable cs_ewtcompatName is not added to the global context map
INFO: This variable cs_ewtName is not added to the global context map
INFO: This variable cs_baliShareName is not added to the global context map
INFO: This variable b_orabaseContainsOrahome is not added to the global context map
INFO: This variable b_isWINDOWS is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibLocation is not added to the global context map
INFO: This variable s_oratabLocation is not added to the global context map
INFO: This variable s_opsmLocation is not added to the global context map
INFO: This variable s_dbuaLocation is not added to the global context map
INFO: This variable s_dbcaLocation is not added to the global context map
INFO: This variable s_OracleBinLocation is not added to the global context map
INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
INFO: This variable s_dbcaLaunchFile is not added to the global context map
INFO: This variable s_dbmaLaunchFile is not added to the global context map
INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = C:\app\User\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 0
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\app\User\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@5059a331
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@2ce90f2d
INFO: Configuration log directory - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Created config job for Oracle Net Configuration Assistant
INFO: Created config job for Oracle Database Configuration Assistant
INFO: Created config job for Oracle Configuration Manager Configuration
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@74247cc2
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: INFO: Parsing command line arguments:INFO: Parameter "orahome" = C:\app\User\product\11.2.0\dbhome_1INFO: Parameter "orahnam" = OraDb11g_home1INFO: Parameter "instype" = typicalINFO: Parameter "inscomp" = client,oraclenet,javavm,server,anoINFO: Parameter "insprtcl" = tcp,nmpINFO: Parameter "cfg" = localINFO: Parameter "authadp" = NO_VALUEINFO: Parameter "responsefile" = C:\app\User\product\11.2.0\dbhome_1\network\install\netca_typ.rspINFO: Parameter "silent" = trueINFO: Done parsing command line arguments.INFO: Oracle Net Services Configuration:INFO: Profile configuration complete.INFO: Oracle Net Listener Startup:INFO: Running Listener Control:
INFO: C:\app\User\product\11.2.0\dbhome_1\bin\lsnrctl start LISTENERINFO: Listener Control complete.INFO: Setting Listener service to start automatically.INFO: Listener started successfully.INFO: Listener configuration complete.INFO: Default local naming configuration complete.INFO: Oracle Net Services configuration successful. The exit code is 0WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO:
INFO:
INFO: Started Plugin named: Oracle Database Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Executing DBCA
INFO: Command C:\Windows\system32\cmd /c call C:\app\User\product\11.2.0\dbhome_1\bin\dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid orcl -gdbName orcl.168.2.5 -emConfiguration LOCAL -storageType FS -datafileDestination C:\app\User\oradata -datafileJarLocation C:\app\User\product\11.2.0\dbhome_1/assistants/dbca/templates -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -automaticMemoryManagement true -totalMemory 3237 -maskPasswords false -oui_internal
INFO: ... GenericInternalPlugIn.handleProcess() entered.
INFO: ... GenericInternalPlugIn: getting configAssistantParmas.
INFO: ... GenericInternalPlugIn: checking secretArguments.
INFO: ... GenericInternalPlugIn: starting read loop.
INFO: Read: SYS_PASSWORD_PROMPT
INFO: Processing: SYS_PASSWORD_PROMPT for argument tag -sysPassword
INFO: Read: SYSTEM_PASSWORD_PROMPT
INFO: Processing: SYSTEM_PASSWORD_PROMPT for argument tag -systemPassword
INFO: Read: DBSNMP_PASSWORD_PROMPT
INFO: Processing: DBSNMP_PASSWORD_PROMPT for argument tag -dbsnmpPassword
INFO: Read: SYSMAN_PASSWORD_PROMPT
INFO: Processing: SYSMAN_PASSWORD_PROMPT for argument tag -sysmanPassword
INFO: End of argument passing to stdin
INFO: Completed Plugin named: Oracle Database Configuration Assistant
INFO: Oracle Database Configuration Assistant failed.
INFO: Oracle Database Configuration Assistant failed.
INFO: ConfigClient.executeToolsInAggregate action performed
INFO: Exiting ConfigClient.executeToolsInAggregate method
INFO: Calling event ConfigToolsExecuted
INFO:
The Runconfig command constructed is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Created a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <setup>
INFO: Completed validating view at state <setup>
INFO: Validating state <setup>
WARNING: Validation disabled for the state setup
INFO: Completed validating state <setup>
INFO: Verifying route success
INFO: Get view named [FinishUI]
INFO: View for [FinishUI] is oracle.install.ivw.db.view.FinishUI@22d215
INFO: Initializing view <FinishUI> at state <finish>
INFO: Completed initializing view <FinishUI> at state <finish>
INFO: Displaying view <FinishUI> at state <finish>
INFO: Completed displaying view <FinishUI> at state <finish>
INFO: Loading view <FinishUI> at state <finish>
INFO: Install Succeeded: true
INFO: Config Tool Succeeded: false
INFO: Remote Install Succeeded: true
INFO: Completed loading view <FinishUI> at state <finish>
INFO: Localizing view <FinishUI> at state <finish>
INFO: Completed localizing view <FinishUI> at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state finish
INFO: FinishAction Actions.execute called
INFO: Completed executing action at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <finish>
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is 0
INFO: Shutdown Oracle Database 11g Release 2 Installer
Edited by: rnair on Mar 18, 2013 10:08 AM

rnair wrote:
I am trying to install Oracle 11g R2 on my windows 7, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
And the final pop up winow says:
Database configuration Assistant:Info
*"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
*"[INS-20802] Oracle Database Configuration Assistant failed"*
Details:
Cause:- The plug-in failed in its perform method
Action:- Refer to the logs or contact Oracle Support Services.
Following are the last few lines of the log file. Can anyone please help me to fix this problem?<snip>
the error has nothing to do with DBCA. DBCA was simply the last in a long string of victims.
Go back and read the instructions where you downloaded the install media. They state that the TWO zip files you download must be unzipped into the same directory.

[INS-20802] Oracle Net Configuration Assistant failed. During installation

Solved one problem now encounter another :(
What to do? Any help is appreciated.
Here is the log.
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Parsing command line arguments:
INFO: Parameter "orahome" = /u01/app/crs/product/11.1.0/db_1
INFO: Parameter "orahnam" = Ora11g_gridinfrahome1
INFO: Parameter "instype" = typical
INFO: Parameter "inscomp" = client,oraclenet,javavm,server
INFO: Parameter "insprtcl" = tcp
INFO: Parameter "cfg" = local
INFO: Parameter "authadp" = NO_VALUE
INFO: Parameter "responsefile" = /u01/app/crs/product/11.1.0/db_1/network/install/netca_typ.rsp
INFO: Parameter "silent" = true
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: ProfileException: Could not save Profile: TNS-04415: File i/o error
INFO: caused by: java.io.FileNotFoundException: /u01/app/oracle/product/11.1.0/db_1/network/admin/sqlnet.ora.linux1 (No such file or directory)
INFO: Profile configuration complete.
INFO: ProfileException: Could not save Profile: TNS-04415: File i/o error
INFO: caused by: java.io.FileNotFoundException: /u01/app/oracle/product/11.1.0/db_1/network/admin/sqlnet.ora.linux2 (No such file or directory)
INFO: Profile configuration complete.
INFO: Problem in configuration: /bin/cp: cannot stat `/u01/app/oracle/product/11.1.0/db_1/network/admin/sqlnet.ora.linux1': No such file or directory :failed/u01/app/oracle/product/11.1.0/db_1/network/admin/sqlnet.ora.linux2: No such file or directory :failed
INFO: Oracle Net Configuration Assistant is launched from Database home. To configure default listener "LISTENER", relaunch Oracle Net Configuration Assistant from Grid Infrastructure home.
INFO: Check the trace file for details: /u01/app/oracle/cfgtoollogs/netca/trace_Ora11g_gridinfrahome1-09112510AM4010.log
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant

Hi guys. Thanks for the replay. Just raises more question :(
What is the different between using dns and hosts file? How do I force it to use the DNS?
I checked that the file sqlnet.ora.linux1 and the directory does not exist. It is strange that I am installing the grid software not the oracle software. The directory only exist in /u01/app/crs/...
[oracle@linux1 ~]$ cd /u01/app/crs/product/11.1.0/db_1/network/admin
[oracle@linux1 admin]$ ls -l
total 12
-rw-r--r-- 1 oracle oinstall 184 Nov 25 10:33 listener.ora
drwxr-xr-x 2 oracle oinstall 4096 Nov 25 10:01 samples/
-rw-r--r-- 1 oracle oinstall 187 May 9 2007 shrept.lst
[oracle@linux1 admin]$
Are these the rsp files? What am I looking for?
[oracle@linux1 ~]$ cd /u01/app/crs/product/11.1.0/db_1/network/install/
[oracle@linux1 install]$ cat netca_clt.rsp
[GENERAL]
RESPONSEFILE_VERSION="11.2"
CREATE_TYPE="TYPICAL"
[Session]
TOPLEVEL_COMPONENT={"oracle.net.ca","11.2"}
[oracle.net.ca]
INSTALLED_COMPONENTS={"client","net8"}
INSTALL_TYPE=""typical""
NAMING_METHODS={"TNSNAMES","ONAMES","HOSTNAME"}
[oracle@linux1 install]$ cat netca_typ.rsp
[GENERAL]
RESPONSEFILE_VERSION="11.2"
CREATE_TYPE="TYPICAL"
[Session]
TOPLEVEL_COMPONENT={"oracle.net.ca","11.2"}
[oracle.net.ca]
INSTALLED_COMPONENTS={"server","net8","javavm"}
INSTALL_TYPE=""typical""
LISTENER_NUMBER=1
LISTENER_NAMES={"LISTENER"}
LISTENER_PROTOCOLS={"TCP;1521"}
LISTENER_START=""LISTENER""
NAMING_METHODS={"TNSNAMES","ONAMES","HOSTNAME"}
[oracle@linux1 install]$
Edited by: kary on Nov 26, 2009 4:15 PM

Oracle ASM Configuration on Solaris Cluster - Oracle 11.2.0.3

Similar Messages

Maybe you are looking for