Oracle ASM will support without installing ASMlib in Oracle11g r2 RAC

Dear Expert,
We want to use the Oracle ASM for Oracle11g r2 RAC.
Can shared storage(SAN) raw partitions support for ORACLE ASM for storage of OCR,VOTING and DATABASE and ARCHIVE LOGS???
In Oracle10g RAC
ASM is capable of referencing disks as raw devices or by using the ASMLib software.
IS there any alternative for ASMLib in Oracle11g RAC or it's mendatory!!!
plz help for clear the understanding of Oracle ASM with Oracle11g r2 RAC.
Regards
Hitesh Gondalia
Edited by: hitgon on Aug 11, 2011 2:20 AM
Edited by: hitgon on Aug 11, 2011 2:23 AM

hitgon wrote:
Dear Expert,
Can shared storage(SAN) raw partitions support for ORACLE ASM for storage of OCR,VOTING and DATABASE and ARCHIVE LOGS???
In Oracle10g RAC
ASM is capable of referencing disks as raw devices or by using the ASMLib software.
IS there any alternative for ASMLib in Oracle11g RAC or it's mendatory!!!
plz help for clear the understanding of Oracle ASM with Oracle11g r2 RAC.
Regards
Hitesh Gondalia
Edited by: hitgon on Aug 11, 2011 2:20 AM
Hi,
It's not mandatory to use ASMLib (not all systems can run ASMLib), you can use raw device or block device for ASM
Cheers

Similar Messages

Oracle pages on clients without installed any oracle package

i use oracle 10g
how can i run oracle pages on clients without installed any oracle package
can i work this?

ZaMaN wrote:
I cannot understand you.
what is this relationship mean?It means that in a 3-tier application, the only client to the database is the app server ... NOT the individual end user machines.

Matrix Report will support by Oracle Applications

Dear All,
As i was new to develop Matrix Report,weather Oracle Application will support the Matrix Report.Plsif any know any seeded reports in Apps.PLs suggest me.
If any one have Matrix Report u can plss send me to my mail id : [email protected]
pls so thet will be help for me.bit urget
Regards
Prasad.

Hi Adrian_s2012,
According to your description, you want to compare values for the month of current year with the month of prior year and get the variance. Right?
In Reporting Services, we don't have any function to get this "Year to Year" Growth. In this scenario, if you data source is a cube, we suggest you use Analysis Services to achieve your requirement. If this data source is just from database, it will be hardly
to calculate the variance because we need to compare the values within every two different column group and matrix generate adjacent columns one by one. Even we make it by using custom, every time executing the long code when generating result
in a cell will reduce a lot of performance, we really don't suggest to do that in SSRS. Here is a thread with much easier requirement, please take a reference of that:
http://social.msdn.microsoft.com/Forums/office/en-US/842e2dcb-d949-4297-9d91-eac989692cb5/difference-between-the-grouped-column?forum=sqlreportingservices
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to Install Oracle ASM 11gR2 In Oracle Linux 6.5

Hi
I want to install oracle ASM in oracle linux 6.5 .
Can any one helps me to find a paper with above subject?
Thanks

Theses steps only if You want to use ISCSI. This is fine to get the howto:
If You ar running in VM Ware Boxes:
Add the following to the *.vmx file for the virtual machine:
disk.EnableUUID = "TRUE"
Restart the vm machine and the /dev/disk/by-id/scsi**** should be visible.
That's a nasty one - without this ISCSI just doesn't work
chkconfig iscsi on
iscsiadm -m discovery -t st -p 192.168.146.100
iscsiadm -m node -T iqn.1991-05.com.microsoft:iscsi-asm-target -p 192.168.146.100 -l
192.168.146.100 <=== IP Number of ISCSI Host
iqn.1991-05.com.microsoft:iscsi-asm-target <== Name of ISCSI Server, you get this as output from discovery command
Now, you must make sure that the devices belong to oracle.
Take a look at this link:
http://www.oracle-base.com/articles/linux/udev-scsi-rules-configuration-in-oracle-linux-5-and-6.php#make_scsi_devices_trusted
Add the following to the "/etc/scsi_id.config" file to configure SCSI devices as trusted. Create the file if it doesn't already exist.
options=-g
/sbin/scsi_id -g -u -s /block/sdc <== for all ISCSI devives
vi /etc/udev/rules.d/99-oracle-asmdevices.rules
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/$parent", RESULT=="360003fff419213c1a9a1ce9b75e35f63", NAME="asm1-disk1", OWNER="asm", GROUP="dba", MODE="0660"
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/$parent", RESULT=="360003fff419213c18af9aa132d316eca", NAME="asm1-disk2", OWNER="asm", GROUP="dba", MODE="0660"
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/$parent", RESULT=="360003fff419213c1b5bd65a6089784ae", NAME="asm1-disk3", OWNER="asm", GROUP="dba", MODE="0660"
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/$parent", RESULT=="360003fff419213c1b0098f974c463139", NAME="asm1-disk4", OWNER="asm", GROUP="dba", MODE="0660"
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/$parent", RESULT=="360003fff419213c18b94be6b8e64ae1a", NAME="asm2-disk1", OWNER="asm", GROUP="dba", MODE="0660"
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/$parent", RESULT=="360003fff419213c1ba97827387889d2f", NAME="asm2-disk2", OWNER="asm", GROUP="dba", MODE="0660"
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/$parent", RESULT=="360003fff419213c19344e120143d71a6", NAME="asm2-disk3", OWNER="asm", GROUP="dba", MODE="0660"
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/$parent", RESULT=="360003fff419213c1b088599c1a9a0a7f", NAME="asm2-disk4", OWNER="asm", GROUP="dba", MODE="0660"
RESULT=="360003fff419213c1b088599c1a9a0a7f" <=== That is returned by /sbin/scsi_id -g -u -s
Reload:
/sbin/udevcontrol reload_rules
/sbin/start_udev
Now you have your devices read, belonging to oracle:
ls -al /dev/asm*
Next go to oracle download click on list all and get:
Oracle Grid Infrastructure 11g Release 2 (11.2.0.1.0) for Linux x86-64
After extracting this you are ready to go.
When starting the install process you get an option to "change path", here select /dev.
In my test systems I use to set "external" for dataprotection.
Regards
Christian

How to install Oracle Lite ODBC driver without connecting the mobile server

My Oracle Lite version is 10g R3.
I am using branch office version application.
I wanted to connect oracle client database(.odb file) via Lite DSN in a windows XP machine without installing the client in that device.
Some of my users wanted to access the client database from backend which requires a DSN entry in that device.Oracle Lite ODBC gets registered in the device only when we do a setup from the mobile server or if Oracle 10g Lite MDK is installed.
I do not want either of this to be done in my user PC. I wanted a ODBC utility which will register oracle Lite ODBC Driver (Normal & Cleint) in the user PC so that i can manually create and configure the DSN.
Does anyone have a solution for this?
Regards,
Ashok Kumar.G

Dear Sir,
Yes, you can find the Driver here
http://www.oracle.com/technology/software/tech/windows/odbc/index.html

How do I build an application that will run without being installed?

I have seen some of the prior posts on trying to do this, but most of them were older, so I'll ask:
Using 7.1, how do I build an application that will run without having to install the runtime engine? I have a client that wants to run serial port monitoring VIs to watch some custom hardware we built for him. His IT dept. won't let him install anything. If I could make this VI run off of a USB thumb drive without needing anything installed on the system it would be ideal. Space is not a problem, so I could include any runtime files needed. Can anyone tell me how to do this?
Thanks

Under what operating system was it running under back in the 90's when it was working?
I think that starting with NT platforms (applies to 2000 and XP, but not 9x) the hardware abstraction layer (HAL) prevented direct I/O to serial ports. Serial port related code that ran fine on 3.x and 9x would not run under NT platforms without modification.
Just some food for thought, do not know if it applies to your situation.
Good Luck
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

Which sql developer version will support oracle 8.1.7

hi
which sql developer version will support oracle 8.1.7 or is it necessary to use plsql developer to connect to database (oracle 8.1.7)

Hi,
SQL Developer version 1.2.1 is able to connect to 8.1.7 with limited functionality (prepared reports and browser for objects could not work)..
Next version (tested with 3.2 64-bit) of SQL developer could be "hacked" to connect to 8.1.7 by simply copy file C:\oracle\product\10.2.0\client_1\jdbc\lib\classes12.zip from Oracle client prior 11
into appropriate jdk\jre\lib\ext folder.

Run sql statements in PL/Sql Developer without installing Oracle database?

Hi all,
I wish to ask is there any possibility to run Run sql statements in PL/Sql Developer without installing Oracle database?
Regards.

Hello Jimmy,
this is the forum for the tool SQL Developer and, as the title says, *(Not for general SQL/PLSQL questions)*.
PL/Sql Developer is not an Oracle tool, but from allound allroundautomations.
And you need access to a database to run SQL statements. This does not need to be one installed by yourself.
Regards
Marcus

Working on SQL Developer / pl/sql developer without installing Oracle

HI,
I am working on SQL Developer tool without installing oracle into my local machine.
I just took server IP as hostname and continuing with the same/
Now, since I donot have tns names, I am not able to use any other user other than my work related.
like scott etc.
could anyone let me know, is there any way that i can work on sql developer or pl/sql developer without installing oracle into local machine
like using scott etc...
for testing and learning purpose of self code.
thanks in advance.

VBSK wrote:
I am working on SQL Developer tool without installing oracle into my local machine. You need an Oracle client driver - this is mandatory.
No, you do not need a TNS alias (as the connection string can be build manually by the application and the driver).
So SQL*Developer needs to have an OCI (Oracle Call Interface) client driver. This can be "installed" using Oracle Instant Client.
Instant Client does not really install - to use it takes 3 basic steps:
- download it (zip file)
- unzip it to a directory (e.g. C:\InstantClient on Windows)
- add to your Windows User's environment an ORACLE_HOME variable that points to this directory
These steps should suffice in making the driver in in Instant Client available to Oracle applications. (works for me running an Oracle OCI client like <i>Mumbai</i> or Oracle's <i>SQL Data Modeler</i>).
If you want a tnsnames.ora file, then create the file and create a new environment variable called TNS_ADMIN that refers to directory location of the file. It can use the same location as your Instant Client directory.
PS. I assume you have an existing Oracle server to connect to.

When will Oracle 10g/11g support Windows Server 2008 and AIX6.1

Hi all
I'm sorry if I post it in a wrong place... But I really want to know when will Oracle 10g/11g support Windows Server 2008 and AIX 6.1?
I've searched in metalink but found nothing useful. Is there anybody can give me a link of Oracle's roadmap for platform support?
Thanks!

Oracle does not announce release dates and neither
does any other software company.But Oracle does have a very good track record of supporting their products on new windows releases extremely close to the windows release date. Clearly they can't support on an unreleased platform though. Given that the launch of Server 2008 isn't even complete worldwide yet (19th March in the UK for example) it would seem that this enquiry is a little premature.
Niall Litchfield
http://www.orawin.info/

Accessing Oracle Server without Installing Oracle Client

Hi
I work on a linux based server which would be installed with Oracle Server. My problem is that I dont want to install Oracle Client on every client workstation since there are 1500 PCs in my company.
Could anyone help me on this?
Please note that all of the workstation are using Windows Operating System.
Thanks
Antony

I do not believe such an animal exists. Since Oracle's wire protocol is proprietary, reverse engineering it is a very significant investment.
If you need to access the Oracle server without installing the Oracle client, can you use the thin JDBC driver?
Justin

What version of firefox will support mp4 video tags without plug ins or extensions?

I have a web site that my users upload mp4 videos to my website. I use html 5 and use the video tags type movie/mp4.
The only browser that has worked without any add ins, plug ins or extensions is safari 4.x and safari 5.x with quicktime. What version of firefox will support playing mp4 videos without any add ins or extensions?

That will probably not happen if there are codecs used that require a license.
See:
* https://developer.mozilla.org/En/Media_formats_supported_by_the_audio_and_video_elements
* http://en.wikipedia.org/wiki/Use_of_Ogg_formats_in_HTML5
Your above posted system details show an outdated Flash plugin(s) that you should update.
*Shockwave Flash 10.0 r22
*http://www.adobe.com/software/flash/about/

How can I connect oracle without installing its SQL*Net client?

How can I connect oracle without installing its SQL*Net client?

Pls suggest, any possible solution, i cross checked from below link, and tried to install the instant clients, but
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/winsoft.html
its showing me error of "This application has failed to start because OCI.dll was not found. Re-installing the application may fix this problem."
Let me know if you have any thing on this.

Installing Oracle Client 11g without installing GAC policies

Hi Guys,
Is there a switch or install change I can use to install the oracle 11g client without redirecting or installing GAC policies in the assembly folder.
Regards Alex

The reason I ask is we want to have both oracle 10 and 11 client installed. And run code build for oracle 10 with the oracle 10 client, and code built for oracle 11 against oracle 11 client if that makes sense.

Oracle ASM will support without installing ASMlib in Oracle11g r2 RAC

Similar Messages

Maybe you are looking for