Oracle AutoVue Configuration for UCM or WCC

I am facing problem during configuration of AutoVue for UCM or WCC. When I run JVue server, it executes normally while, when i check Jvueservlet server, an error has been occurred like java execution program property error. After completing installation and configuration AutoVue for UCM, When one clicks on "View In AutoVue", then it opens in a new window but again an error occurred and nothing to display. Kindly give me related solution or post Screens for Oracle AutoVue in UCM installation and configuration.

Hi Ora-Tech,
When you say "Jvueservlet" shows an error, are you referring to the "VueServlet"? If the VueServlet status page is showing an error, then this means there's either a problem on the application server hosting the VueServlet, or a problem with the AutoVue server itself. What is the exact error message you're seeing on the VueServlet status page? Also, when this error occurs, did you also check the AutoVue server admin console to see if all processes are still running properly?
If this is a VueServlet or AutoVue server issue, and if the issue still persists, I would recommend to log a Service Request through the My Oracle Support portal so that our Support team can help diagnose.
Thanks,
Graham

Similar Messages

Oracle Text Search for UCM on Standard One

I'm curious if OracleTextSearch Component for UCM would work with 11g Standard One (or if there are any limitations running UCM with Standard One). Any experiences out there - as this would be for primarily smaller instances?

As far as I can tell, that component exposes some of the functionality of Oracle Text 11g.
Looking at this feature comparison set here:
http://www.oracle.com/database/product_editions.html
It looks like the Standard Edition includes Oracle Text.
Having said that, i've used Oracle Database 11g Standard as a development platform for a while. I would think that would be just fine, considering the small amount of information supplied about your particular implemetnation, metrics baselines, etc.
-Jason Stortz
http://www.corecontentonly.com
http://www.redstonecontentsolutions.com

Oracle 10g Configuration for Student Edition

To Whom It May Concern,
I am currently enrolled in an Oracle 10g course at a local community college, and am using the "Guide to Oracle 10g" textbook by Morrison, Morrison & Conrad (ISBN: 0-619-21629-8). This book came with two CD's that contain a scaled-down student version of two Oracle 10g databases (Northwoods University & Clearwarter Traders).
I have attempted to install and configure the database software so that I can log on to the databases using SQL*Plus, but I am unable to do so. When attempting to log on, I get a "TNS:no listener" error (ORA-12541) or similar error. I have tried adding and configuring a listener, net service, etc. using the Oracle Net Configuration Assistant, but nothing works. The configuration tests always fail. I am sure that I am using the correct host name (I checked the TNSNames.ora file).
Can you please assist? Do you have documentation (or advice) on how to successfully configure this software?
Thank you,
Greg

Thanks again for your reply, Phiri. I tried your suggestion, but still get the same errors. I tried searching the Oracle Home directory for a batch or executable file with the name "lsnrctl", but the search only returns two htm files. It looks like it can't execute the program simply because it does not exist.
NOTE: According to the .htm files, you are supposed to include the listener name after the command.
Ex: lsnrctl start My_Listener_01
I tried this, but it did not work either
DOS commands and error messages are as follows:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Eddie>cd ../..
C:\>cd C:\Oracle_Home_01\BIN
C:\Oracle_Home_01\BIN>lsnrctl status
'lsnrctl' is not recognized as an internal or external command,
operable program or batch file.
C:\Oracle_Home_01\BIN>lsnrctl start
'lsnrctl' is not recognized as an internal or external command,
operable program or batch file.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Oracle_Home_01\BIN>lsnrctl status MY_LISTENER_01
'lsnrctl' is not recognized as an internal or external command,
operable program or batch file.
C:\Oracle_Home_01\BIN>lsnrctl start MY_LISTENER_01
'lsnrctl' is not recognized as an internal or external command,
operable program or batch file.
C:\Oracle_Home_01\BIN>lsnrctl start SID_LIST_MY_LISTENER_0
'lsnrctl' is not recognized as an internal or external command,
operable program or batch file.
C:\Oracle_Home_01\BIN>

Oracle EBS configuration for Fresh Installation

Dear All,
I have Installed a fresh Installation from Oracle E-business. Is there is any new configuration I need to do before start creating My Ledger and Legal Entity.
I face an following Error, when I enter to GL.
APP-SQLGL-08252: Oracle General Ledger could not retrieve your access set information.
Please make sure the profile option Gl:Access Set is set up properly for you responsibility.
Thank you very much,
Ahmad,

Ahmad Hamdan wrote:
Dear All,
I have Installed a fresh Installation from Oracle E-business. Is there is any new configuration I need to do before start creating My Ledger and Legal Entity.
I face an following Error, when I enter to GL.
APP-SQLGL-08252: Oracle General Ledger could not retrieve your access set information.
Please make sure the profile option Gl:Access Set is set up properly for you responsibility.
Thank you very much,
Ahmad,Please see (R12 ASM When Try To Create Account Mapping To Assign To Secondary Ledger Get APP-SQLGL-08252 [ID 551547.1]).
Thanks,
Hussein

How to configure oracle thin drivers for SUN APPLICATION SERVER

hi all,
I am working with EJB with oracle as back-end. I wants to know how to configure oracle thin drivers for the SUN APPLICATION SERVER. Please explain me breifly.
Advanced thanks to all the replies.
with regards,
/kumaraswamy.n

Kumaraswamy,
Did you try searching the Internet? Here are the results of my Internet search:
http://tinyurl.com/zo4gk
And one of the first hits in the list was this:
Deploying to a Sun Java System Application Server
Good Luck,
Avi.

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

How to configure the Oracle XSL Mapper for schemaLocation attribute?

In the Transformation_1.xsl I need to have the schemaLocation attribute defined as such:
<inc:CaseIncidentReport xsi:schemaLocation="http://caseincidentreport.com/1.0.4 CaseIncidentReport.xsd">
This is fine as long as long as I dont switch to the Design tab. When I switch to the Design tab, Oracle XSL Mapper regenerates the XSL file and renders the root element as
<inc:CaseIncidentReport>
Can some one tell me how to configure Oracle XSL Mapper for schemaLocation attribute? I am using BPEL Designer/JDeveloper Version 10.1.2.1.0 (Build 1915)
Thanks,

What do you mean by normal import? Where can I include the 'schemaLocation' attribute in the Designer? I have no trouble adding the shemaLocation in the source tab but when I switch to the design tab it always stripe it off.
How do I file an enhancement request? I see the the XSL Mapper needs improvements.
Thanks,
Nathan

12c agent install fails with error - The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed

Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,

Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal

Want to configure Oracle EDI Gateway for Inbound Invoice Interface

Hello,
Newbie to Oracle Apps and want to configure Oracle EDI Gateway for Inbound Invoice Interface. We are having Oracle EBS R12 installed on OEL 5.6
Do i need to install EDI Gateway or it comes with APPS R12 installation ? if i have to install it explicitly then which EDI version i have to install ? what are steps should i follow to achieve desired results.
One more query, we are having old version of Oracle APPS 6i too, is it possible to configure Oracle EDI Gateway on it ??
You help will be highly appreciated.

Try to post your message on dedicated EBS forums http://forums.oracle.com/forums/category.jspa?categoryID=3.

Error starting Portal or Commerce Server when Configured for Oracle

I've been attempting to configure Portal 4.0 to work with Oracle. I'm running Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic Portal for
Oracle Databases". Specifically, I setup the tablespaces, connection pools and successfully
run the scripts to populate the tables. I am confident the Oracle OCI driver is configured
properly (have done this many times). However, after I make all of the necessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading configuration file .\config\wlcsDomain\config.xml
..> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. I tried a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point to my instance
of Oracle (are their additional things I need to load in Oracle to support it using
the RDBMS realm). Is there a way I can disable the security realm to at least get
the server up-and-running (via the web.xml). I've installed and reinstalled many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff

I finally found this bug in the release notes, i'm surprised one of the bea guys couldn't
answer this....
"Mike Friesen" <[email protected]> wrote:
>
I had the same type of problem with portal 4.0. Trying downloading the
newest 7.0, I found it works much better.
Mike
"K C" <[email protected]> wrote in message news:[email protected]...
I found this as well. However, i still am not able to run the portal afterconfiguring
for oracle. While running create_all, i get many errors like "can binda
LONG value
only for insert into a LONG column"
the table are being created, this appears to occur in the "insertingrequired bootstrap
data" phase.
thanks
"Joshua Davies" <[email protected]> wrote:
You probably followed the instructions too closely. I had the same
problem,
due to
something that's not quite a "bug" in the installation instructions.Look
back at
the section "Update Settings for the RDBMS Security Realm" in thedeployment
guide
(http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm#1039294).
In the table in step 2, they show the URL on top, and the Driverclassname
underneath
it. HOWEVER... on the actual data screen, the Driver is on top and the
URL is underneath
it. If you're not being very very careful, it's easy to swap thesetwo
values
and put the URL in the Driver input box and the Driver in the URL input
box. Make
sure you haven't accidentally done this; if you have, you can stillchange
this in
the config.xml file (do a text search for an element RDBMSRealm withan
"name" attribute
of "wlcsRealm").
Verify that it looks like this:
<RDBMSRealm DatabaseDriver="weblogic.jdbc.oci.Driver"
DatabaseURL="jdbc:weblogic:oracle"
Name="wlcsRealm"
and not this:
<RDBMSRealm DatabaseDriver="jdbc:weblogic:oracle"
DatabaseURL="weblogic.jdbc.oci.Driver"
Name="wlcsRealm"
Very subtle gotcha...
"Jeff Davis" <[email protected]> wrote:
I've been attempting to configure Portal 4.0 to work with Oracle. I'm
running
Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic
Portal for
Oracle Databases". Specifically, I setup the tablespaces, connectionpools
and successfully
run the scripts to populate the tables. I am confident the Oracle OCIdriver
is configured
properly (have done this many times). However, after I make all of thenecessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading
configuration
file .\config\wlcsDomain\config.xml
...> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable toinitialize
the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. Itried
a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point
to my instance
of Oracle (are their additional things I need to load in Oracle tosupport
it using
the RDBMS realm). Is there a way I can disable the security realm toat
least get
the server up-and-running (via the web.xml). I've installed andreinstalled
many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff

Looking for oracle.siebel.configurator.screen.Configurator

I'm exploring an upgrade of Siebel 8.1.1.3 to 8.1.1.10. The software upgrade seemed to go without errors, and I believe I need to do an incremental repository merge. However, when I run the command to kick that off (/opt/siebel/config/config.sh -mode dbsrvr) I get an error saying "Could not find the main class: oracle.siebel.configurator.screen.Configurator. Program will exit."
I'm running Slackware Linux on my test box, I know unsupported, but 8.1.1.3 has worked fine so far. This server has all the Siebel components installed on it in /opt/siebel. I have sourced the siebenv.sh file beforehand. I have examined all the jar files in my siebel install directory and cannot find that class.
Can someone tell me what I am missing?
Thanks for any suggestions.

Hi ,
1. Have you sourced dbenv.sh before launching DB config wizard?
Before you run the Database Configuration Wizard, you must source either dbenv.csh (for C shell) or dbenv.sh (for Bourne or Korn shell).
2. Then run below command for Siebel Database Configuration Wizard:
install_path/config/config -mode dbsrvr
In this path, install_path is the installation path for the installed Siebel Enterprise Server software. for example:
/siebel/8.1.1.11.0/ses/config/config -mode dbsrvr
3. Another important point to include here is IRM implementation is different in Siebel 8.1.1.10 and Siebel 8.1.1.11.
In Siebel 8.1.1.11 you need to launch DB Config wizard to run IRM, refer MOS document 'Innovation Pack 2013: Siebel 8.1.1.11 and 8.2.2.4 Incremental Repository Merge (IRM) - FAQ and Troubleshooting (Doc ID 1623495.2)'.
BUT for Siebel 8.1.1.10 IRM is not run through DB config wizard.
Refer- - Siebel CRM 8.1.1.10 and 8.2.2.3 Incremental Repository Merge (IRM) - FAQ and troubleshooting (Doc ID 1549478.2)
Thanks,
Shilpi

Enhancement Request - KickStart files for Oracle Validated Configurations

Just a thought, but I would like to request that the "Oracle Validate Configurations" also include an example kickstart file that contains the necessary RPMs above the default. In addition, in the %post section, all of the OS modifications (e.g. sysctl parameters, user accounts, ulimits, pam.d mods) that need to be completed for an Oracle installation could also be provided.
I have found some on the web and from suppliers such that I have created a kickstart file that is working for me and my hardware, but my mind would be at ease if there were more "sanctioned" versions out there.
FYI -- Reading through the documentation, it appears that OEM module for Oracle Linux provides the mechanism to create a kickstart file in the bare metal provisioning features.

A good start has already been done on OTN
http://www.oracle.com/technology/pub/articles/saternos_kickstart.html

Internal disk configuration for oracle

Hi experts
I need some guidance for internal disk configuration for oracle
requirements are for 2 node clustered VM on linux OS OEL
the OS will be for RAC, OEM
will RAID 5 be optimal setting
this is not production env
thanks

912919 wrote:
Hi experts
I need some guidance for internal disk configuration for oracle
requirements are for 2 node clustered VM on linux OS OEL
the OS will be for RAC, OEM
will RAID 5 be optimal settingFor most definition of "optimal" the answer is "NO"
RAID+10 provides better performance.
Handle:     912919
Status Level:     Newbie
Registered:     Feb 7, 2012
Total Posts:     135
Total Questions:     74 (46 unresolved)
why do you waste time here when you rarely get your questions answered?

Problems Oracle 9iDB and ASO Configuration for Cybersafe

Oracle 9iDB installation on Solaris with ASO option
Objective
My objective is to configure Oracle 9iDB, Release 9.0.1 ASO on Solaris for external authentication using Cybersafe ActiveTRUST, which is a Kerberos, based authentication product.
Question
Getting ORA-12641: Authentication Service failed to initialize when trying to connect to Oracle 9iDB using sqlplus from a Oracle 9i Client machine, when ASO is configured for Cybersafe authentication on both Oracle 9iDB and Oracle 9i client
Can anyone help me setup Oracle 9iDB and Oracle 9i client for ASO using Cybersafe Authentication?
Environment
1. I have a Solaris box as my Oracle 9iDB server
2. I have an NT Server as my Authentication server and Oracle 9i Client.
Installation Procedure
I installed as per the steps given in the doc, Oracle Advanced Security Administrators Guide, Release 9.0.1
Authentication Server / Oracle Client setup (NT Server)
I installed on the NT Server the following
1. CyberSafe ActiveTRUST 4.0 Security Server on the NT Server, which acts as an Authentication server.
2. CyberSafe ActiveTRUST 4.0 Security Client
3. Cybersafe Application Security Toolkit (GSS runtime libraries) as needed by Oracle ASO setup procedures.
4. Oracle 9i Client, custom installations with ASO option.
Oracle 9iDB Server Setup (Solaris Server)
I installed on the Solaris Server the following
1. CyberSafe ActiveTRUST 4.0 Security Client
2. Cybersafe Application Security Toolkit (GSS runtime libraries)
3. Oracle 9iDB server, custom installation, with ASO option selected.
Installation of all the above components is successful.
Note: Installation of Oracle 9iDB server with ASO option never prompted me to choose a Authentication mechanism like Cybersafe, or Kerberos or Radius etc..,
Note: Oracle 8.1.7 DB installation on NT actually prompted for Authentication mechanism selection.
ASO Configuration:
I configured ASO on the Oracle server and client side as mentioned in chapter 5 of Oracle Advanced Security Administrators Guide, Release 9.0.1
I created an external user in Oracle, [email protected] as mentioned in http://download-uk.oracle.com/otndoc/oracle9i/901_doc/network.901/a90150/1004747
I configured the NT server, Oracle 9i client for ASO using Net8 Assistant and I have the sqlnet.ora file.
ASO Problems:
Once I have configured both Oracle 9i client and 9iDB server for ASO, I am not able to log in to the database using sqlplus /@cybr.
It returns with an error ORA-12641, saying Authentication Services Failed to Initialize.
I could not get much help from questions posted on metalink on ORA-12641.
It looks like Solaris 9iDB could not recognize cybersafe even though, Cybersafe is listed as one of the installed adapters, when I ran # $ORACLE_HOME/bin/adapters. From this, it looks like Cybersafe adapter is linked to ASO.
Oracle Server is not able to initialize authentication services and call the authentication server at all.
Can anyone help me setup Oracle 9iDB and Oracle 9i client for ASO using Cybersafe Authentication?

The problem has been resolved after providing cn=orcladmin instead of orcladmin for the OID user admin user. Now the overall sso solution is working fine with ADF applications.
Regards,
S R Prasad

How to configure distributed transaction in Oracle Database Gateway for ODBC? (ORA-02047)

I am connecting from Oracle to another database server (MS SQL Server, DB2 the error message is the same) through an ODBC connection using Oracle SQL Developer. (This is how I set up)
I want to query the schema of a non-Oracle database using the data dictionary mapping of the Oracle Database Gateway for ODBC.
This works well:
select * from all_tables@katimssql;
But this doesn't:
create table alltables_mssql as
select * from all_tables@katimssql;
Output:
Error report:
SQL Error: ORA-00604: error occurred at recursive SQL level 1
ORA-02047: cannot join the distributed transaction in progress
ORA-06512: at "SYS.HS$_DDTF_SQLTABLES", line 58
ORA-06512: at line 1
Does anyone know the solution of this?
Thanks in advance,
Kata
Details:
Oracle Database 11g Express Edition Release 11.2.0.2.0
Microsoft SQL Server 2008 (SP2) - 10.0.4000.0 (X64)
ODBC Driver: SQL Server Native Client 11.0 (32 bit)
initkatimssql.ora:
HS_FDS_CONNECT_INFO=katimssql
HS_FDS_TRACE_LEVEL = ON
HS_TRANSACTION_MODEL = READ_ONLY_AUTOCOMMIT
I tried these, none of them worked, the error message is the same.
HS_FDS_TRACE_LEVEL = off
HS_TRANSACTION_MODEL = SINGLE_SITE
HS_TRANSACTION_MODEL = READ_ONLY_AUTOCOMMIT
HS_TRANSACTION_MODEL = READ_ONLY

Hi Kata,
this won't work as the ALL_TABLES is not a table that exists in your SQl Server - instead it is a "mimicked" table. This means the gateway will check if you have on your SQL Server a table called all_tables and when there's no table it will start an internal mechanism to check out what sort of tables exist in your SQL Server database. So the gateway is starting internally another transaction to get details from the foreign database and DG4ODBC can't participate in distributed transactions at all. Instead of using all_tables you have to use a real SQL Server table like SQ Server sys.objects or sys.tables.
- Klaus

Oracle AutoVue Configuration for UCM or WCC

Similar Messages

Maybe you are looking for