Oracle B2B Data not getting encrypted

Hi,
We have to demo S/MIME encryption using Oracle B2B as part of our POC for SFTP on EDI Generic protocol.
We are facing issues with it.
The configuration used for S/MIME encryption on B2B is as follows:
Protocol:EDI EDIFACT over Generic Exchange
Message types:EDIFACT
Transport:sFTP
Is Non-Repudiation of Receipt Required: True
Is Non-Repudiation of Origin Required: True
Encryption Enabled: True
We have tried various variations of this theme.
Presently for generating the certificates I have set up a local Oracle Certificate Authority on my desktop. The certificates are then exported and imported into a wallet on the server.
When data is sent out from Host B2B system, I find that the data is in simple plain text format it has not been encrypted.
On checking the log files I cannot find any error, however it tells the below:
***** REQUEST MESSAGE *****
Exchange Protocol: Generic Version 1.0
Transport Protocol: SFTP
Unique Message ID: Host_2008Feb05_14_24_55_075.dat
Trading Partner: TPartner
Message Signed: RSA
Payload encrypted: 3DES
Attachment: None
***** REQUEST MESSAGE *****
I have changed the tip.properties file to look at correct wallet location.
Is there any other extra configuration step which needs to be done?
Any pointers would be of great help.
Thanks,
Gautham

Encryption using S/MIME in generic exchange layer is seldom used.
You might be running into a bug. Is there a reason to use generic exchange,
Can the customer use AS2 - which provides S/MIME encryption.
Please let us know.
Rgds,Ramesh

Similar Messages

Contact person Rel.ship Data not getting updated in B2B Web User Mngt

Hi CRM Gurus,
Need some help on Web User Management functionality.
Sub: Contact person Relationship data not getting updated when we change the company (to wich contact person belong to) in ISA CRM 5.0 Web User Management.
we are currently on CRM ISA 5.0 and using Web User Managment for our B2B scenario. New creation of users is working fine. But when we want to change the company (Sold to pary) for the existing contact person, the relationship data in CRM is not getting updated and the below are the details.
Contact person No: XXXX (has a Relationship: "Is contac person for YYYY company in CRM)
Company/Sold to Party: YYYY (has a relationship "Has contact person XXXX in CRM).
When I chage the contact person's (XXXX) company from YYYY to ZZZZ,
- Relationships of the new assignment for ZZZZ in CRM not getting updated.
- Old Records in YYYY is not getting deleted (i.e. relationships.
- There is No relationship data appear in XXXX.
Appreciate any inputs on the same.
Thanks,
Rahul >>>

Hi Rahul,
I'd suggest you running a session trace / ABAP debugging to see if some information is not getting passed from the Java stack onto the ABAP stack. An alternate move would be to create a new OSS customer message.
Cheers,
Ashok.

In VA01 In Schedule line Delivery date not getting populated

Hello,
We have developed enhancement for VA01 tcode.
Depending upon the quatity entered for a material it should show one more item as free good.
If quatity is 10 for a line item 10 then it should show item 20 by default same mateerial and quatilty as 1.We have done this it is working fine.
But if we select free good item in our case it is 20 and click on schedule line item buttom all quaitity fields getting populated.but delivery date not getting populated for only free good.for line item 10 it showing properly.
Can any one please suggest what i need to do in order to display delivery date for free good.
Thanks in advance.
Regards.

Thanks for your response.
Actually i have seen technical settings for that field.it is rv45a-etdat.this field has value till MV45AFZZ.seen in debugger.
Looks like it is clearing some where after the above include.Any suggisitions welcome.Thanks again.

Data not getting populated in Payslip in ESS Portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Hello,
Do one thing for executing the PZ11_PDF trsaction please follow following steps.
1. Once you log in SAP system with same User - Id which you r using on Portal .
Once log in PUT "/N" in the command box . Then put the trasaction "PZ11_PDF" and execute it will
Call the salary statement .
Or
Once you log in SAP system put the trasction "/nsbwp" then give the trasaction "PZ11_PDF" it will
call the salary statement ..
give inputs once you done
.....The issue with Authorisations please check it ...
Add this object in ESS role "S_SERVICE' ...
and this object in ESS role "P_PERNR" ---infotype 0008
Edited by: Vivek D Jadhav on Jun 15, 2009 11:49 AM

Data not getting populated in ESS Payslip in portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Asha,
Maintain Feature EDPDF which determines the SMARTFORM being used to make the payslip available for employees. This is more of a HR related issue and I believe if you post this in the ESS or HR Forum you would be able to resolve this issue.
Good Luck!
Sandeep Tudumu

Data not getting fetched from Quotation to Contract

Hi,Myself new to TM. I have a ticket mentioning data not getting fetched from quotation to contract. How to solve it? Please help...
Message was edited by: Michael Appleby

Please add the version of the TM product and which SPs have been installed. Also more information on the quotation and contract.
What do you mean by ticket? It you mean an error message, from where are you reading the message?
Regards, Mike
SAP Customer Experience Group - CEG

Adhoc Query data not getting displayed on Portal

Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GT

Hi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal

Team view data not getting refers for some user

Hi,
We are facing an issue in team view app for mss, manager's are seeing details of employees not belonging to their Org Unit/ data not getting refreshed. This seems to be the Cache related issue where the data of perviously logged in user is displayed to the current user till browser cache are cleared manually.
User don't have permission to clear browser cache. Is there any work around.The issue is coming only for some users.I have enable the 'ABAP HTTP Security session Enabled' property of the system used.
Regards
Pallavi

Hi Karthik,
in the first view I execute the BAPI and in the second view I show the results. In the second view I also submit the modified data via another BAPI.
As I execute and display result of same BAPI in two different views I have bound the same model node to both of these views. Let me give you some sample code for understanding what have I done.
In the first BAPI's search action handler I have written:
          Zsr_Packnr_Validate_Components_Input input = new Zsr_Packnr_Validate_Components_Input();
          wdContext.nodeZsr_Packnr_Validate_Components_Input().bind(input);
          input.addT_Version(new Zsr_Packnr_Field_Values());
          input.addT_Zsr_Genbr(new Zsr_Packnr_Field_Values());
input.setZsr_Gmc(globalMaterialCode);
          input.setZsr_Mrc(mrc);
          input.setZsr_Ctry(country);
          input.setZsr_Dc(distributionChannel);
          input.setZsr_Div(commercialSegment);
wdContext.nodeOutput_Validate().invalidate(); //as u suggested
          wdContext.currentZsr_Packnr_Validate_Components_InputElement().modelObject().execute();
          wdContext.nodeOutput_Validate().invalidate();
In the second BAPI I just display the output node from the same Model context node (its mapped to the second view too).
But as I said whenever I update some values in the result set and submit it the data gets submitted properly. But when I press the search button again, the previous set of data gets populated, not the just updated data.
If anybody has some idea on why the second time search BAPI execution still shows the previous set of result it will be a great help to me.
Thanks for all your help.
Shubhadip

Packets not getting encrypt and decrypt IPSEC

Hi Everyone,
I have 2691 Router conencted to Internet and it is doing Nat.
This connects to 3550A Switch which has connection to 1811W Router.
I setup VPN between 1811W and 3550A.
3550A has connection to 2691 via ospf.
OSPF is running between 1811w and 3550A.
1811
1811w# sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id status
192.168.99.2    192.168.99.1    QM_IDLE           2005 ACTIVE
IPv6 Crypto ISAKMP SA
1811w# sh crypto ipsec sa
interface: FastEthernet0
    Crypto map tag: VPN_MAP, local addr 192.168.99.1
   protected vrf: (none)
   local ident (addr/mask/prot/port): (192.168.0.0/255.255.0.0/0/0)
   remote ident (addr/mask/prot/port): (192.168.99.0/255.255.255.0/0/0)
   current_peer 192.168.99.2 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
    #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 30, #recv errors 0
     local crypto endpt.: 192.168.99.1, remote crypto endpt.: 192.168.99.2
     path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0
     current outbound spi: 0x0(0)
     PFS (Y/N): N, DH group: none
     inbound esp sas:
     inbound ah sas:
     inbound pcp sas:
     outbound esp sas:
     outbound ah sas:
     outbound pcp sas:
3550A
3550SMIA#                                                                                           sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id slot status
192.168.99.2    192.168.99.1    QM_IDLE           1001 ACTIVE
IPv6 Crypto ISAKMP SA
3550SMIA#sh cry
3550SMIA#sh crypto ipsec sa
interface: FastEthernet0/8
    Crypto map tag: VPN_MAP, local addr 192.168.99.2
   protected vrf: (none)
   local ident (addr/mask/prot/port): (192.168.0.0/255.255.0.0/0/0)
   remote ident (addr/mask/prot/port): (192.168.99.0/255.255.255.0/0/0)
   current_peer 192.168.99.1 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
    #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 15, #recv errors 0
     local crypto endpt.: 192.168.99.2, remote crypto endpt.: 192.168.99.1
     path mtu 1500, ip mtu 1500
     current outbound spi: 0x0(0)
     inbound esp sas:
     inbound ah sas:
     inbound pcp sas:
     outbound esp sas:
As seen above the packets are not encrypted between 1811w and 3550A.
I have used same ACL on both 1811W and 3550A
ip access-list extended INTERESTING_TRAFFIC
permit ip 192.168.0.0 0.0.255.255 192.168.99.0 0.0.0.255 log
Any reasons why packets are not getting encrypt and decrypt?
Thanks
MAhesh

Hi Eugene,
I did that here is info now
        sh crypto ipsec sa
interface: FastEthernet0
    Crypto map tag: VPN_MAP, local addr 192.168.99.1
   protected vrf: (none)
   local ident (addr/mask/prot/port): (192.168.0.0/255.255.0.0/0/0)
   remote ident (addr/mask/prot/port): (192.168.99.0/255.255.255.0/0/0)
   current_peer 192.168.99.2 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 43, #pkts encrypt: 43, #pkts digest: 43
    #pkts decaps: 43, #pkts decrypt: 43, #pkts verify: 43
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 1, #recv errors 0
     local crypto endpt.: 192.168.99.1, remote crypto endpt.: 192.168.99.2
     path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0
     current outbound spi: 0x8319FE5B(2199518811)
     PFS (Y/N): N, DH group: none
     inbound esp sas:
      spi: 0xAE0A578B(2919913355)
        transform: esp-des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 15, flow_id: Onboard VPN:15, sibling_flags 80000046, crypto map: VPN_MAP
        sa timing: remaining key lifetime (k/sec): (4454255/2388)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE
     inbound ah sas:
     inbound pcp sas:
     outbound esp sas:
      spi: 0x8319FE5B(2199518811)
        transform: esp-des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 16, flow_id: Onboard VPN:16, sibling_flags 80000046, crypto map: VPN_MAP
        sa timing: remaining key lifetime (k/sec): (4454255/2388)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE
     outbound ah sas:
     outbound pcp sas:
Seems it is encrypted now.
Congig of ACL
ip access-list extended INTERESTING_TRAFFIC
permit ip 192.168.0.0 0.0.255.255 192.168.99.0 0.0.0.255 log
even though i have log command config in thr ACL still it shows only
2 logs
.Dec 15 14:23:55.723 MST: %SEC-6-IPACCESSLOGP: list INTERESTING_TRAFFIC permitted udp 192.168.99.1(123) -> 192.168.99.2(123), 1 packet
.Dec 15 14:29:28.391 MST: %SYS-5-CONFIG_I: Configured from console by mintoo on vty0 (192.168.98.6)
.Dec 15 14:40:55.749 MST: %SEC-6-IPACCESSLOGP: list INTERESTING_TRAFFIC permitted udp 192.168.99.1(123) -> 192.168.99.2(123), 1 packet
1811w#
Do you know why is this?
Thanks
MAhesh

Data not getting inserted into oracle with theAutoCommitEnabled not checked

Hello Experts
I have a proxy to JDBC scenario.I have 3 SQL statements and the Format is
<DeleteStatement>
<InsertStatement>
<CallStoredProcStatement>.
While excecuting with the AutoCommitEnabled box checked, the insert statement is excecuting and the data is getting updated in the oracle database..But the CallStoredProcStatement is not excecuting.
If the AutoCommitEnabled box not checked,the data is not getting updated in the database .but in RWB log all the SQL statements are getting executed successfully.
Are there any other configurations still to be made in the JDBC adapter.

Hi,
Why you not using single SP to handle all the queries?
BTW, have you used the parameter "logSQLStatement = true" in JDBC receiver channel? It will show in audit log what query is being executed.
Regards,
Neetesh

Data not getting uploaded in the AQ table.

Hi All
We have one issue with the AQ tables.
The scenario is like we first send data from Oracle to SOA and then to a third party tool.
For this we first populate data in one custom payload table and then in to one custom AQ table.
Now the data is getting updated in the paylaod table and XML is getting generated, but it is not getting interfaced to the third party tool.
Reason : Data is not getting populated in the custom AQ table from where SOA picks the data and interfaces it ti the third party tool.
Error is a custom one :
While equeing the data using the below statement
l_chr_corrid := p_in_event.getvalueforparameter ('CORRID');
since the CORRID Id is null it gives us the message :Correlation ID has not been set for the payload.
Part of the code for setting WF parameters :
l_chr_corrid_val := l_chr_event_name || '.order';
wf_event.addparametertolist (p_name => l_chr_corrid_name,
p_value => l_chr_corrid_val,
p_parameterlist => l_param_list
l_local_event.setcorrelationid (l_chr_corrid_val);
l_chr_rule_ret := wf_rule.default_rule (p_in_subscription_guid, l_local_event); -- Returns success
This is quite urgent , hence kindly help us find a sollution to this issue.
Thanks in advance
Trupti

Looks like you havent populated the correlation id. To make sure this is unique use the conversationID, or GUI, etc.
Not sure what version you are on. If 10g look at this note (obviously chnage from file to AQ, concept the same):
http://middleware1.wordpress.com/category/adapters/page/2/
If 11g you should be able to see the property when you edit the invoke activity, there is a tab called properties.
cheers
James

Data not getting in table in master detail block form

Hi
I am using oracle forms 10g
I have three block namely control_block, Header_block and detail_block and three button in three block. Find button in control_block,Detail button in Header_block and save button in Detail_block.
Now i will enter PO_number in the Control block and enter find button and the po details is fetched and it will show the po details in the Header_block and in the header_block i have one field named as Expeditor and here the user will assing Expeditor to that po_number and Click the Save button in the Detail_Block.
this is my code
DECLARE
ln_count NUMBER;
CURSOR c_expeditor
IS
SELECT po_number
FROM xxogec_poexp_expeditor_stg
WHERE po_number = :header_block.po_number;
BEGIN
IF :DETAIL_BLOCK.po_number IS NULL
THEN
FOR c_exp_rec IN c_expeditor
LOOP
IF c_expeditor%NOTFOUND
THEN
INSERT INTO xxogec_poexp_expeditor_stg
(po_header_id,
po_number, creation_date,
po_expeditor_name
VALUES (:header_block.po_header_id,
:header_block.po_number, SYSDATE,
:header_block.expeditor
ELSE
UPDATE xxogec_poexp_expeditor_stg
SET po_expeditor_name = :header_block.expeditor
WHERE po_number = :header_block.po_number;
END IF;
END LOOP;
STANDARD.COMMIT;
End if;
End;
Now when i press save button the data is not getting inserted.
Can any please correct me where my code went wrong.
Thanks & regards
Srikkanth.M

FOR c_exp_rec IN c_expeditor
LOOP
IF c_expeditor%NOTFOUND
THENYou'll never get to the IF statemement, because there is nothing to loop if there is nothing to be found.

Data not getting fetched bacause of index getting used

Hi,
I am selecting data from employee table having index on emp_id.
Select * from employee where emp_id=101
After executing Query doesnt show any data.
but after executing like this
Select * from employee where trim(emp_id)=101 --so index not getting used
query shows data.
How should resolve this.
I am using Oracle 11G
Thanks

what is the data type of emp_id column... best approach is NUMBER data type....
drop index
Add another column in emp table (NUMBER data type)
transfer all emp_id records in new column
drop old column
rename new column as emp_id
create index on it

Oracle B2B Payload not delivered to partner through Generic HTTP channel

Hi,
We have a situation where the B2B payload is not delivered to the partner. Below are the steps we followed to set up the agreement and channels.
1. Created a document definition under "Custom" protocol and uploaded the XSD into the document definition.
2. Created the remote partner.
3. Created a generic HTTP channel in the profile tab. Given a HTTPS url and also specified the keystore location.
4. Created the agreement and specified the above HTTP channel in the to-partner channel's section.
5. Posted the message to Oracle B2B through SOAP UI.
6. Message has reached B2B and the agreement is invoked and state of the message is MSG_COMPLETE.
7. In the wire message, I could see the state as complete and packed message is having the payload.
8. Even in the diagnostic log, I could see the http response code as 200.
" [IPT_HttpSendResponseStatusCode] HTTP Response status code: 200"
But, the remote partner is not receiving this payload. I am not sure where the issue? Remote partner is getting an error message as below
Doc Number =%error/ErrorInfo/documentNumber%
Document Type =%error/ErrorInfo/documentType%
Sender =Unknown
Receiver =Unknown
Correlationid =%error/ErrorInfo/correlationid%
ErrorMessage =[XSL.0003.9002] Transformation: No XML source provided
ServiceName =pub.xslt.Transformations:transformSerialXML
Please suggest any clue on how to debug this.
Thanks,
-Sriharish.

We got this fixed by setting the "additional transport headers" in the channel.
Additional Transport Headers: SOAPAction="notify"#Content-type=text/xml
Thanks,
-Sriharish.

SM 13: Data not getting updated.

Hi Basis Gurus,
We have installed SAP IDES for ECC6.0 using Oracle Database in our Windows 2003 Server. Everything was fine till we dicovered that the materials we create are not getting updated in the Database. When I checked SM12, the lock was created and in SM13 the data is still at initial stage as follows
810 RAJARNO 20080730 110902 MM01 @06\QUpd.record with enqueues@ Initial
Can somebody explain why this is happening and how can i resolve the same?
Thanks in Advance for your help.
Regards,
Rajesh Manoharan

Hi Siddesh / Samrat,
The logs are pretty low. Infact the system is 1 week old i.e. we installed it only a week back.
I checked the SM 14 status.. it says Update is Active.
I checked even the hard disk space and it shows 30 Gig free space..
Please let me know anything else I need to see.
Thanks,
Rajesh Manoharan

Oracle B2B Data not getting encrypted

Similar Messages

Maybe you are looking for