Oracle BAM Data Flow Service service could not be started

I can't start the Service Oracle BAM Data Flow Service
I got the message: Error: A service specific error occurred: 126
I follow the steps in the installation guide in the section:Data Flow Service Terminated with Service-Specific Error 126, but i get the error yet.
Any body help please

Check the event logs on the computer with Event Viewer to look for more information.

Similar Messages

SCOM 2012 Data Access Service could not start

Hello,
I have 3 SCOM 2012 servers. I got the error that the All Managament Server Pool is not available. Google search give me a lot of posts to add folder PoolManager at HKLM\System\CurrontControlSet\services\HealthService\Parameters with the DWORD keys PoolLeaseRequestPeriodSeconds
600 and PoolNetworkLatencySeconds 120. After restarting last SCOM server the Data Access Service could not run "Windows could not start the System Center Data Access Service. Error 1053: The service did not respond to the start or control request in a
timely fashion"
At Operations Manager Eventlog I see an error: "OpsMgr Management Configuration Service failed to communicate with System Center Data Access Service due the following exception: System.Runtime.Remoting.RemotingException: Unable to get ISdkService interface.
Please make sure local Sdk Service is running."
At System Eventlog I see an error: "A timeout was reached (30000 milliseconds) while waiting for the System Center Data Access Service service to connect."
Why did it run on the both other servers and failes on the third one? What can I check?
Regards, Doreen

Hi,
According to my understanding, after editing the registry key value, two of three management servers work fine now, and the issue only occur to the third one. Whether all those servers are running with Windows server 2012?
I would like to suggest you re-check the service account for the data access service, maybe we can re-enter the account credential. Those three servers may use the same account for the service, make sure the account is not disabled and you enter in the right
password for it.
Here is a similar thread, please go through it for more details:
http://social.technet.microsoft.com/Forums/en-US/f2281934-513d-4b60-bb4b-34ae8a892ace/failed-to-open-the-console-and-system-center-data-access-service-wont-start-scom-2012?forum=operationsmanagergeneral
In addition, please also restart the third server and check the result, and I know that there is a similar error message in SCOM 2007:
http://blogs.technet.com/b/csstwplatform/archive/2012/01/02/scom-2007-r2-unable-to-open-the-scom-console-after-server-reboot-the-sdk-service-is-stopped.aspx
Regards,
Yan Li
Regards, Yan Li

The OracleDBConsoleORAHAS service could not be started.

Dear All,
I installed Oracle10g on Windows XP system successfully but when I am going to start the dbconsole it gives the following error.
C:\oracle10g\product\10.2.0\db_1\BIN>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://MOHAMMAD-HASHIM.ROSHAN.AF:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleOR
AHAS service is starting.
The OracleDBConsoleORAHAS service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
Can anybody help me out from this?
Thanks in Advance
Hashim

Check the following:
- You must to add your hostname in your etc/hosts file of this way
127.0.0.0 hostname.domain hostname
- Check the availability of the port 1158. For this check
telnet hostname 1158
- Check the log files of dbconsole. Normaly exists a log directory in this location
ORACLE_HOME\sysman
- Check that the listener and database is up
Regards

System error 3 OracleDBConsoleorcl service could not be started.

Hallo!I installed Oracle 10g on my Windows XP while connected to my modem that accesses the internet via DHCP.
I installed the Microsoft Loopback Adapter to force my OEM and isqlplus to use the static IP 10.0.0.1.
When I try to launch my OEM via http://joey-xp:1158/em (hostname joey-xp resolves to 10.0.0.1),I am unable to launch OEM.
From the cmd prompt,I type emctl start dbconsole.
C:\Documents and Settings\JOEY>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://127.0.0.1:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleorcl service is starting.
The OracleDBConsoleorcl service could not be started.
A system error has occurred.
System error 3 has occurred.
The system cannot find the path specified.
I don’t understand why the default loopback (127.0.0.1) is being used.
How do I solve this?
Thanks.

Thanks zekeriya but unfortunately using
emca -dbconfig dbcontrol db
does not help.
The system error 3 still appears.
Thanks.

The OracleXETNSListener service could not be started.

I have just installed OracleXE but the listener wont start. This is the message I get when trying to start the server:
C:\SVV\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
The OracleXETNSListener service is starting.
The OracleXETNSListener service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
C:\SVV\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\SVV\oraclexe\app\oracle\product\10.2.0\server\BIN>
Any good ideas??

Hi Jer
There is no listener.log in that folder, I assume it is because it is initialized the first time the listener starts. The only file in the directory is sqlnet.log, it contains this information:
Fatal NI connect error 12641, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 05-SEP-2006 16:32:13
Tracing not turned on.
Tns error struct:
ns main err code: 12641
TNS-12641: Authentication service failed to initialize
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Also after reading a lot of posts on this forum, I have tried to write:
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-SEP-2006 08:02
:13
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Message 1053 not found; No message file for product=NETWORK, facility=TNSTNS-125
57: Message 12557 not found; No message file for product=NETWORK, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
TNS-00527: Message 527 not found; No message file for product=NETWORK, facility=TNS
Maybe this can cast some more light on the situation??

Centralized logging service could not be started

When the Lync centralized logginng service agent tries to start I get an error in the Lync server logg on all of the servers.
First I get infromationmessage:
"New config received from CMS. Following are the changed settings: EtlFileRolloverSizeMB: Old - NULL, New - 20.........."
And then an error:
Lync Server Centralized Logging Service Agent Service could not be started.
Exception: Could not load file or assembly 'Microsoft.Rtc.ClsAgent.IISLog, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Exception type: FileNotFoundException
Additional Data:
Source: ClsAgent
Stack Tracer.Trace:
at Microsoft.Rtc.ClsAgent.AgentCore.InitializeAgentCore()
at Microsoft.Rtc.ClsAgent.ClsAgent..ctor(ClsAgentService service)
at Microsoft.Rtc.ClsAgent.ClsAgentService.StartAgent()
at Microsoft.Rtc.ClsAgent.ClsAgentService.OnStart(String[] args)
Data: 0 key/value pairs
Inner Exception:
Cause: Exception during startup
Resolution:
Check the events prior to this to resolve the service startup issue."
The service is started though.
Lync 2013 server, CU4.

Hi,
today I have installed all Lync update in two servers, and we have the same issue, on Lync edge server 2013 std ed. and Lync FE server 2013 std. All server are Windows Server 2012 std. ed. with all update.
There is a solution? New fix or a UFFICIAL workaround?
Thanks
Aurelio (5T S.r.l.)
Log Name:      Lync Server
Source:        LS Centralized Logging Agent
Date:          9/28/2014 1:15:41 AM
Event ID:      33005
Task Category: (1007)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description: Lync Server Centralized Logging Service Agent Service could not be started.
Exception: Could not load file or assembly 'Microsoft.Rtc.ClsAgent.IISLog, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Exception type: FileNotFoundException
Additional Data:
Source: ClsAgent
Stack Tracer.Trace:
   at Microsoft.Rtc.ClsAgent.AgentCore.InitializeAgentCore()
   at Microsoft.Rtc.ClsAgent.ClsAgent..ctor(ClsAgentService service)
   at Microsoft.Rtc.ClsAgent.ClsAgentService.StartAgent()
   at Microsoft.Rtc.ClsAgent.ClsAgentService.OnStart(String[] args)
Data: 0 key/value pairs
Inner Exception:
Cause: Exception during startup
Resolution:
Check the events prior to this to resolve the service startup issue.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="LS Centralized Logging Agent" />
    <EventID Qualifiers="50159">33005</EventID>
    <Level>2</Level>
    <Task>1007</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-27T23:15:41.000000000Z" />
    <EventRecordID>10569118</EventRecordID>
    <Channel>Lync Server</Channel>
    <Computer>               .5t.torino.it</Computer>
    <Security />
</System>
<EventData>
    <Data>Could not load file or assembly 'Microsoft.Rtc.ClsAgent.IISLog, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Exception type: FileNotFoundException
Additional Data:
Source: ClsAgent
Stack Tracer.Trace:
   at Microsoft.Rtc.ClsAgent.AgentCore.InitializeAgentCore()
   at Microsoft.Rtc.ClsAgent.ClsAgent..ctor(ClsAgentService service)
   at Microsoft.Rtc.ClsAgent.ClsAgentService.StartAgent()
   at Microsoft.Rtc.ClsAgent.ClsAgentService.OnStart(String[] args)
Data: 0 key/value pairs
Inner Exception:
</Data>
</EventData>
</Event>
Check the events prior to this to resolve the service startup issue.

The Oracleagent10gAgent service could not be started...

Hi,
i am getting following when starting agent
d:\oem\agent10g\BIN>emctl start agent
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
The Oracleagent10gAgent service is starting.......
The Oracleagent10gAgent service could not be started.
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
Thanks,

Can you please check what is written to the log on EM directory which is probably under Oracle_HOME\servername_sid\sysman\log
directory
You will see the actual error instead of fancy microsoft errors
A. Coskan GUNDOGAR
Oracle DBA
http://coskan.wordpress.com
“A man's errors are his portals of discovery.”
James Joyce

Apple Mobile Device service could not be started. (-2146959337)

I keep getting the error "Apple Mobile Device service could not be started because an unknown error occurred (-2146959337). After I hit OK, it says "This iPod cannot be used because the Apple Mobile Device is not started." I have tried starting the service by going into Services, but it just tells me "Error 5: Access is denied." I have reinstalled iTunes, Quicktime, and Apple Mobile Device service multiple times, but I still get the same error. I had an iPod nano that worked fine, but now that I got an iPod touch, it gives me this issue every time I connect it.

I figured it out on my own, and it was an odd fix. I added a password to my account in users, and then made Apple Mobile Device service log in through my account, and now it works.

My iTunes opens in safe mode but when I try to sync my ipad? It says apple mobile device service could not be started because an unknown error occurred 1084

It says apple mobile device service could not be started because an unknown error occurred 1084

I figured it out on my own, and it was an odd fix. I added a password to my account in users, and then made Apple Mobile Device service log in through my account, and now it works.

TS1567 Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all my disap

Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!

Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

CWMLS daemon manager service could not be started

Hello,
Our server in which we have installed Ciscoworks LMS was restarted due to power supply problems. After that "CiscoWorks Daemon Manager" service is not getting started. I've tried to stop all the ciscoworks related services and restart it, also tried restarting the server machine. Ciscoworks LMS Version 3.0, installed on windows 2000 SP4. The error message is:
E:>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
I've changed casuser password using resetCasuser.exe file, but there was no change.
Any clue?

Hi ,
Please attach the syslog.log ( If it is huge in size then truncate and send me some of the Lateste logs..)
--Screen shot of the services.msc winodw ( with all the cisco works service)
--Go to start >control Panel >Administrative Tools > Event Viewer > open the Application logs and send me the screen shot of the lastest event ..
In the mean time try this :
go to services.msc > change the startup type of the Daemon Manager to MAUNAL from Automatic and
ReBoot the Server ... Once server is back online > change the startup type back to Automatic and Try to Restart the Daemon Manager .
Note : Please make sure the IIS Admin service is Disable
Thanks
Afroj

TREX - http service could not be started

Hi Experts,
After installing TREX on a windows server in a Portal scenario the
Httpserver/Webserver is not starting up.Could you please help to
analyze
and resolve this issue.
Symptom:
TREX httpserver is showing red in the "Services " tab of the TREX Admin
tool.
The following are some of the actions i performed
1.Applied note
1029783 - TREX 7.0 Httpserver does not work in 64 Bit Windows
1981642 - TREX http service could not be started
2.Executed the steps as its from the below link
http://wiki.scn.sap.com/wiki/display/TechTSG/TREX+WebServer+is+not+starti
ng+up
after doing all these still i'm unsuccessful.Could you please help me
in
solving the issue.
Thanks,
Satheesh E

Hi,
Please refer to below detailed guide,
http://wiki.scn.sap.com/wiki/display/TechTSG/TREX+WebServer+is+not+starting+up
Also check logs for errors and add them also.
Kind Regards,
Johan

The CSadmin service could not be started.

I am Upgrading from 3.3 to 4.2...
When I upgrade from 3.3.4 to 4.1, 4.1 is not working.
No error during the install, but when I try to start csadmin (net start csadmin) I have this error
"The CSadmin service could not be started. error 3523"
I tried exactelly the same upgrade on other machines with the same config and it's working well.
I have tried to clean the registory manually and using the clean tool on the CD, it doesn't help.
The fresh install of 4.2 is not working better, same error.
Any idea about what it could be ?
I am wokring on ACS for windows with Windows Server 2003 SP2.
Thanks For your help.

Have you tried restarting the service from services.msc. Also, try rebooting the server. If that doesn't help, then you need to uninstall theCS software and reinstall it.
If you have already tried clean utility to uninstall the ACS and issue still persist. Please disable all the ACS services via services.msc and then try to uninstall it.
Please let me know if you have any query or concern.
Regads,
JK
Do rate helpful posts-

BAM Data Flow Service Problem

Hi,
Please help me.
Sagent Service Failed with as follows Error
Unable to allocate new memory block. Please increase your SADCAGNT virtual memory size or add another Agent swap file.

Use Enterprise Link Admin to increase AgentVMMemory and/or add a Swap File.
First see the Enterprise Link Administrator's Guide:
http://www.oracle.com/technology/products/integration/bam/10.1.3/documentation/bameladmin101310.pdf
"Chapter 5 - Data Flow Service Administration" covers both of these topics.
Regards, Stephen

Data Acces Service could not start

Hi everyone,
Completely accidentally, putting manually Agent Control Panel settings on the management server then we have restarted the Microsoft monitoring agent service.
After having realizing our mistake, we have removed all these settings(it should be empty in the management server), but then some problems occurred on the server and data access service does not start again. There are 2 management servers at the environment
and we are having the same problem on both servers.
For example, the following event is seen on the event viewer, i know the description is not normal.
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.ConfigurationReaderException: Feature of type 'Microsoft.EnterpriseManagement.ServiceDataLayer.IDBVersionCheckFeature, Microsoft.EnterpriseManagement.DataAccessService.OperationsManager, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
cannot be added to the container. ---> System.IndexOutOfRangeException: Index was outside the bounds of the array.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DBVersionCheckFeatureImplementation.SwitchHSToOM12Mode()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DBVersionCheckFeatureImplementation.InitializeDBVersionChecker()
   at Microsoft.EnterpriseManagement.SingletonLifetimeManager`1.GetComponent[K]()
   at Microsoft.EnterpriseManagement.FeatureContainer.GetFeatureInternal[T](Type type, String featureName)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.ConfigurationReaderHelper.ReadFeatures(XPathNavigator navi, IContainer container)
   at Microsoft.EnterpriseManagement.ConfigurationReaderHelper.Process()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart(Object obj)
Also, when we control, at the registry   [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Server Management Groups] keys are dissapearing!
When we created the keys manually, data access service is starting and console is opening. But when we restart either Microsoft monitoring agent service or the server these keys are dissapearing again.
Any help!
Yavuz Eren Demir

Hi Yan,
I also continued to analyze at the lab environment. But, the following key cannot seem on the new established server:
(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Agent Management Groups)
Are you sure that you have it? This key must not be seen on the management servers.
By deleteing this key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Agent Management Groups) and HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HealthService\Parameters\management Groups\ for group (was empty) copying
the keys out of the working management servers, I realized that problem is over.
Thanks
Yavuz Eren Demir

Oracle BAM Data Flow Service service could not be started

Similar Messages

Maybe you are looking for