Oracle-BAM is getting failed

Hi All,
When ever i am trying to start the Oracle-BAM from console it is failing and below is the error that i am getting:-
<Oct 25, 2013 3:39:31 AM EDT> <Warning> <oracle.bam.adc.dse.oracle.OracleStorageEngine> <BEA-000000> <BAM Server singleton enforcement mode is disabled. The BAM Server will not lock BAM schema for exclusive use. Use caution not to start more than one BAM Server against the same BAM schema instance.>
<Oct 25, 2013 3:39:31 AM EDT> <Error> <oracle.bam.adc.dse.oracle.OracleStorageEngine> <BEA-000000> <Unable to lock BAM schema for exclusive use. Another BAM Server may already be running against this schema. Use caution not to start more than one BAM Server against the same BAM schema instance.>
<Oct 25, 2013 3:39:31 AM EDT> <Emergency> <oracle.dfw.incident> <BEA-000000> <incident 12 created with problem key "DFW-99998 [java.lang.NoClassDefFoundError][oracle.bam.adc.kernel.server.DataStoreServer.startPerformanceCounters][oracle-bam]">
BAM server is coming up properly.
Please help!!!!!!!!!!!

That means you had created another schema identified by another BAM version. Please drop the schema by rcu and try again.

Similar Messages

Oracle BAM : Tabs are not getting displayed

Hi
Just started working in Oracle BAM. I opened exisiting reports that came with the installation. Now when I click on Edit View -> "Data" button in the "View" Editor of an existing report ; the following tabs shld be displayed as per the BAM user guide : DataObjects, Fields, Filter, Drilling ...etc .
But none of the tabs are comming in the browser. In fact 7 empty tabs are dispalyed and are disabled.
When I click on "Properties" in the "View" editor ; all the tabs are comming and I can click on the tabs and edit the properties. But the tabs under "Data" option is not working.
I have deployed SOA suite 11.1.1.3 on wls 10.1.3. I am using IE 7. Any pointers will be helpful!!
Thanks

This link solved the problem for me.
REQD for Fresh BAM Install 11.1.1.3.0 -Data labels missing issue

Oracle BAM 11.1.1.7, getting error while running ICOMMAND

oracle BAM 11.1.1.7
unable to load configuration from file: BAMICommandConfig.xml [ErrorSource="java.lang.Exception: unable to load configuration from file: BAMICommandConfig.xml"]
Any suggestions
Checked the file its exists and had correct server name and port and transport

ok - I think I've got it figured. Appears to be a known issue. You need to apply patch p17073913_121200.
I downloaded that and applied to my Linux version - then re-ran the UA. This time the GUI started and so now I'm going through the upgrade steps.
The patch is generic, so should work for your windows environment too. Good luck.

Unable to create Oracle BAM Sinks in Design Studio on Windows XP Profession

Hi,
I am unable to create any Oracle BAM Sink in Design Studio. I am getting this error, when trying to drag BAM Sink to my plan:
Failed to create the Transform COM object.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x5B]
Problem in step "Untitled, created 13. 11. 2007 16:39:07".
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x2, PlanMgr -- 0x32]
Error while preparing the Plan for execution.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0x11]
The Design Studio is installed on notebook with Windows XP Professional SP2.
On the W2K server with Data Flow Service installed it seems to be OK.
K.

Select Unique TO_CHAR(T1.TRANSDATE, 'YYYY') as YEAR,
TO_CHAR(T1.TRANSDATE, 'MM') as MONTH,
TO_CHAR(T1.TRANSDATE, 'MONTH') as MONTHNAME, T1.TRANSDATE
From SALES T1; <--bad
from SALES T1 <--correct
it should not have ";" at the end of the statement.

Oracle BAM not starting

Hi,
I installed fmw 11.1.1.4 on 64 bit windows system.Everyting is working fine but while starting BAM managed server its giving error,
"BamServer" failed to preload on startup in Web application: "/oracle/bam".
Then I check oracle-bam (11.1.1) application in weblogic console and its not active state,while I'm trying to install the same its asking for deployment plan.
Do anyone know where to get that plan file or point me appropriate link...

Can you post the complete error info with stacktrace?
Cross post your query on BAM forum as well -
Integration - Oracle BAM
Regards,
Anuj

Error starting Oracle BAM active data cache service

Hi
after installing BAM every thing working fine ,but if restart my system Oracle BAM active data cache service throwing following error
"The Oracle BAM Active Data Cache service on Local computer started and then stopped.Some services stop automatically if they have no work to do,for example the performance logs and alerts service"
Database is running fine
Following is the ADC log file error
2007-12-07 17:19:29,640 [2928] ERROR - ActiveDataCache The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> System.DllNotFoundException: Unable to load DLL (OraOps10.dll).
at Oracle.DataAccess.Client.OpsTrace.GetRegTraceInfo(UInt32& TrcLevel, UInt32& StmtCacheSize)
at Oracle.DataAccess.Client.OraTrace.GetRegistryTraceInfo()
at Oracle.DataAccess.Client.OracleConnection..ctor(String connectionString)
at Oracle.DataAccess.Client.OracleConnection..ctor(String connectionString)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleDataFactory.GetConnection()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
2007-12-07 17:24:45,250 [1524] ERROR - ActiveDataCache Unable to load DLL (OraOps10.dll).
2007-12-07 17:24:45,265 [1524] WARN - ActiveDataCache Exception occurred in method Startup
Please help me in resolving this issue .Am getting this issue every time
Thanks
BS

Make sure the path to the ODAC used by BAM (C:\OracleBAM\ClientForBAM\bin) is the first item in the system PATH
environment variable. Restart your computer after fixing this.
If that doesn't fix it, please check the Troubleshooting section in the BAM Install Guide.
Regards, Stephen

Oracle BAM Authentication Question

We are facing a strange problem related to Oracle BAM authentication and I'd like to ask for opinions or suggestions.
- We have a BAM Server called MYSERVER
- MYSERVER is a Win2003 and BAM was installed using MYSERVER\Administrator account
- We have a domain called MYDOMAIN
- MYSERVER is part of domain MYDOMAIN and this domain is registered in MYSERVER as a trusted domain.
- We have four user groups created in domain, not in bam server:
1) MYDOMAIN\bamAdmin
2) MYDOMAIN\bamArchitect
3) MYDOMAIN\bamDesigner
2) MYDOMAIN\bamUser
- In Windows 2003 we added the following users to the groups below:
user MYDOMAIN\adm was added to group MYDOMAIN\bamAdmin
user MYDOMAIN\arch was added to group MYDOMAIN\bamArchitect
user MYDOMAIN\des was added to group MYDOMAIN\bamDesigner
user MYDOMAIN\usr was added to group MYDOMAIN\bamUser
- In Administrator>Login Management
We didn't create login for users, only groups just described:
MYDOMAIN\bamAdmin
MYDOMAIN\bamArchitect
MYDOMAIN\bamDesigner
MYDOMAIN\bamUser
- In Administrator>Roles Management
We selected each Role and added the following groups
Administrator > MYDOMAIN\bamAdmin
Report Architect > MYDOMAIN\bamArchitect
Report Creator > MYDOMAIN\bamDesigner
Report Viewer > MYDOMAIN\bamUser
- After that, we return to Administrator > Login Management to review groups
There is an yellow question mark indicating bam cannot validate this login in domain controller.
This login is not currently known to be a valid login.
We click in one of the described groups, such as
MYDOMAIN\bamUser
And then in "View Roles" link.
We receive the following message
ADC Server exception in GetUserGroups(): 3.
Source: "ActiveDataCache" ID: "ADCServerException"
Logon failure: unknown user name or bad password
Source: "Oracle.BAM.Common.Core"
Sometimes we get: "Network path not found" and finally we get this message:
"The account used to run the Oracle BAM Active Data Cache does not have permission to retrieve the list of groups for this user. Contact your network administrator."
- If MYDOMAIN\usr that was added to group MYDOMAIN\bamUser try to access BAM Viewer module or bam home page (http://myserver/oracleBam), he receives the same error in welcome screen.
- User MYDOMAIN\usr can login to MYSERVER server in domain MYDOMAIN, so server recognizes the domain and user.
- In Windows NT Alert Viewer we have several errors/warnings registered, telling that BAM could not validate user/login and also "RPC Server Unavailable" errors.
- I tried changing ADC Service user credentials to MYDOMAIN\Administrator, but ADC Service didn't start anymore, so we have to reconfigure to MYSERVER\Administrator.
- In ADC Log we have several messages indicating BAM could not validate user:
2008-01-22 17:26:11,875 [User Validation Thread] WARN - ActiveDataCache Caught exception while validating user MYDOMAIN\usr: Logon failure: unknown user name or bad password
And when we changed credentials to MYDOMAIN\Administrator we got messages indicating bam stores some type of key/encrypt information by user who installed product (MYSERVER/Administrator):
2008-01-22 16:49:16,062 [1484] ERROR - ActiveDataCache DPAPI was unable to decrypt data. CryptUnprotectData failed. Error -2146893813: Key not valid for use in specified state.
Somebody may point us what could be wrong, perhaps a tip or doc about WINDOWS/BAM auth integration?
Metalink has few information about that, such as Note: 412555.1, but from network view it seems to be correct because we may log on MYDOMAIN\usr to MYSERVER successfully.
Bam could integrate to NT user authentication seamlessly, but it seems to me that it's harder and tricky than we thought.
Any ideas?
Thank you in advance,
Rogério

Hi,
Windows services running as local user can not do domain user authentication (even when machine is on that domain)
You will need to change ADC Service user credentials to MYDOMAIN\Administrator. If you just do this only in services, service wont start because the database passwords in config files are encrypted as original user and can not be decrypted by new user.
See "Working with Post-Install Password Changes and Password Expiration Policies" in the BAM Install Guide (In chapter 3 under Additional Configuration Settings) to change the config files. And also add MYSERVER\Administrator to BAM Administrator group before change.
The easiest may be to just reinstall as user MYDOMAIN\Administrator.
Thanks
Ranga

Cannot Start Oracle BAM ADC

Hi,
I would appreciate if anyone can help me in solving this issue.
I`m getting an error while starting the ADC Service.
Service cannot be started. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> System.Exception: DPAPI was unable to decrypt data. CryptUnprotectData failed. Error -2146893813: Key not valid for use in specified state.
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(Byte[] cipherTextBytes, Byte[] entropyBytes, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText, String entropy, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText)
at
It was working ,suddenly it stopped working and giving this error. Dont know what`s wrong.Need help.
Thanks

Hi Nitin,
Was the password of the account that the ADC service runs as changed?
If so, see "Working with Post-Install Password Changes and Password Expiration Policies" in the BAM Install Guide.
Regards, Stephen

Oracle BAM

You do not have permission to perform the requested action.
[ErrorSource="ActiveDataCache", ErrorID="ADCPermissionMissing"]
[Oracle BAM Enterprise Link error code: 0x79 -- 0x1, 0x79 -- 0x1]
Error while calculating the output schema for the step 'update receiveRD'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while calculating the output schema for the step 'Oracle BAM Insert'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "BPELOrderBookingPlan" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
Iam getting this error while running a simulator which will post the data to EMS. It fails to post the same data in to the Data Object. Pls guide me.
Prakash Singh.

Hi,
Check this....http://www.oracle.com/technetwork/middleware/bam/technote-bam-integrationwithobiee-134095.pdf
Assign points if helpful
Regards,
Srikanth

Error in Starting Oracle BAM Active Data Cache

I am not able to start "Oracle BAM Active Data Cache" on my machine.
The other two components "Oracle BAM Event Engine" and "Oracle BAM Report Cache" are starting properly.
When I see the event log file of my Computer I could see the details as below:
Event Type: Error
Event Source: Oracle BAM Active Data Cache
Event Category: None
Event ID: 0
Date: 2/7/2007
Time: 3:51:25 PM
User: N/A
Computer: CHNANDA-WXP
Description:
ActiveDataCache: The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> Oracle.DataAccess.Client.OracleException ORA-12541: TNS:no listener at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Could anyone pls help me?
Thanks and Regards,
Chinmaya Nanda

hi Chinmaya -can yoy tell us your companyname,project ? Your problem is very simple.BAM ADC is notable to reachoracle db.fromyour dos prompt- try tnsping <yrDB> [default is oraclebam or orcl ]/ Also see FAQ pages. there is a requirement on dos prompt setting, with <clientforBAM>as 1st parameter

BI Publisher Bursting program getting failed.

Hi,
The bursting program is getting failed. I configured the BI Publisher scheduler configuration. when i schedule a report it is delivering successfully , but when i burst it is getting failed. In the scheduler history it is showing the below message for all the delivery by the burst program.
Delivery Type           EMAIL
     Status          Failed
     System Message
C:\DOCUME~1\SPALAN~1\LOCALS~1\Temp\3\xdofQuBd3MglK093010_092711319109.fo (The system cannot find the path specified).
Do i need to create any TEMP folder similar to Xml publisher temp folder in ORACLE APPS that is used for bursting. Where can i check the Bi publisher Scheduler LOG file to know the error clearly.
Thanks in advance.

Create a BI Publisher log folder where in you should be able to find the log information in xdo log file.
Here are the steps:
1.GOTO OraHome_1\Jdk\Jre\lib folder and create a file xdodebug.cfg
2.Enter following information in the file:
LogLevel = STATEMENT
LogDir = <Location of the log folder >
3.Save and close the xdodebug.cfg file
4.Restart OC4J services
5.Check if the Log folder mentioned in the cfg file is created.
Thanks,
Shilpa

How to Create an Oracle BAM Server Connection?

I m following the steps at the end of this post to create the connection but at the end I m getting this message from JDev:
{Unable to write to
/C:/JDeveloper/mywork/Application1/.adf/META-INF/connections.xml
because it is a read-only. Either make it writable or allow it to be made writable through source control.}
it creates the directory C:/JDeveloper/mywork/Application1/.adf/META-INF/ with only a adf-config.xml file but NOT the connections.xml any one knows what is wrong?
Bellow is the stpes I m following. Its exactly what is written at the Oracle Fusion Middleware Developer´s guide for Oracle SOA Suite 11g Release 1(11.1.1) E10224-01
To create an Oracle BAM connection:
1. Select New from the File main menu in Oracle JDeveloper.
The New Gallery dialog opens.
2. Choose Connections from the General category.
3. Select BAM Connection in the Items list, and click OK.
The BAM Connection wizard opens.
4. Provide a name for the connection. Leave the Create Connection In selection as
Application Resources.
5. Click Next.
6. Enter the following connection information about the Oracle BAM instance.
7. Click Next.
8. Test the connection by clicking Test Connection. If the connection was successful,
the following message appears:
Passed.
9. Click Finish.
Note: You can create connections to Oracle BAM in the Oracle
JDeveloper Resource Palette as well as the Application Resources
panel of a specific application. It is recommended that you create these
connections in the Application Resources pane rather than the
Resource Palette.
Field Description
BAM Web Host Enter the name of the host on which the BAM report server and
Web server are installed. In most cases, the BAM Web host and
Oracle BAM Server host are the same.
BAM Server Host Enter the name of the host on which the Oracle BAM Server is
installed.
User Name Enter the Oracle BAM Server user name (typically bamadmin).
Password Enter the password of the user name.
HTTP Port Enter the port number or accept the default value of 8888. This is
the HTTP port for the BAM Web host.
RMI Port Enter the port number or accept the default value of 9085. The
RMI port is for the BAM report cache, which is part of the Oracle
BAM Server.
Use HTTPS Select this check box if you want to use secure HTTP (HTTPS) to
connect to the Oracle BAM Server during design time.
Otherwise, HTTP is used.
Message was edited by:
Mario.Mesquita

Ok that will be nice, but is not the case I dont want to read the tutorial, the problem is I already start to read and execute the tutorial you told me the problem is this tutorial it doesnt show how to do everything from scratch because you already have inside the zip file everything like xmls etc etc, and I want to get my DO and create the process myself, I dont want to get something that it is already done, this tutorial does not show for example how to create this composite.xml, this file it is already inside the zip file, so this way I just follow half of the process and dont learn how to make the whole process.
tks

Differences between Oracle BAM and Oracle BI and Question BAM Data Objects

Hi,
I have two questions.
1. Can someone tell me differences between Oracle BAM and Oracle BI?
My understanding about Oracle BAM is, we use BAM to build Dashboards or Reports.
We can also build DashBoards or reports using Oracle BI.
I am not able to understand why Oracle has two tools for same purpose?
Which tool is more powerful and user friendly(Oracle BI or Oracle BAM)?
2. Every time we plan to develop Dashboard or report in BAM, we need to create BAM ADC Data Object to store Data (i.e first step is to get data from external database or application and second step is to store data in BAM ADC data object).
My understanding is we have an extra step(i.e creating Data Object) in Oracle BAM to develop a report or DashBoard
I am wrong pl correct me?
Regards,
Shanti Nagulapalli.

Oracle 11g has many advanced features in PL/SQL over Oracle 9i.
refer here,
http://www.oracle.com/technetwork/database/features/manageability/9i-to-11g-real-world-customer-exper-133754.pdf
http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr2_workshop2.pdf
http://www.compuworks.com/events/view/233.pdf
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D52601GC10&p_org_id=15942&lang=US
Thanks

Installing Oracle BAM on Windows XP

I just wanted to know whether Oracle BAM can work on Windows XP. In the install guide they have mentioned XP can be used for demo purposes but their minimum requirements state they need Windows Server 2003 or 2000 as the platform.
Can you please confirm whether BAM will work on Windows XP?

Please note that it is not officially supported. If you have a problem then you would need to reproduce it on a supported platform to get Oracle support help.

Oracle BAM First page error

Hi All,
I have installed Oracle BAM 10.1.3.0 with Oracle DB 10.2.0.2.0 on widows 200 server SP2 machine. The BAm services are starting properly, but I'm getting the following error in the first page:
An Error Ocured while processing your request:
Exception Message: ADC Server exception in GetUserGroups():2.
Stack Trace : .....
Debugging Information: ....
Assembly: Start Page
State: Oracle.BAM.StartPage.Startup
Event: Initialize
Can anybody please help me out...
Thanks a lot in advance.
Varun R

hello Varun/ Coert
I guess -it- is not advisible to directly modify or alter any bam tables, it may land you into unrecoverable errors. Alternnate is to use the MakeBAMAdmin SQL utility on the OTN pages. Coert- can you try using http://www.oracle.com/technology/products/integration/bam/10.1.3/htdocs/1013_support.html
ADCAdminUtility

Oracle-BAM is getting failed

Similar Messages

Maybe you are looking for