Oracle BAM part of SOA release?

Isn't Oracle BAM part of SOA suite? If so, is it part of 10.1.3.1 SOA Preview release?
There used to be BPEL Process Analytics with earlier release and there is the Peoplesoft aquired .NET version of BAM. I am not so clear on the BAM road map with respect to SOA suite.
Thanks in advance.
Regards,
Rajesh

In 10.1.3. BAM is still .net based (at lease partly) which means you need to install it seperatly - but the good news is we are working ahrd to make it j2ee - and going forward it will be part of the whole thing
hth clemens

Similar Messages

Oracle BAM(10g Release 3(10.1.3.1.0) Instllation hangs

Oracle BAM(10g Release 3(10.1.3.1.0) Instllation hangs in Database User Creation Step.
Please Advise what might be the problem.

Hi,
can you
* provide the error message from the installation log?
* check, that the database is open and you can connect via sqlplus to this machine
* have you checked the installation manual, that you have done all required steps

How to Create an Oracle BAM Server Connection?

I m following the steps at the end of this post to create the connection but at the end I m getting this message from JDev:
{Unable to write to
/C:/JDeveloper/mywork/Application1/.adf/META-INF/connections.xml
because it is a read-only. Either make it writable or allow it to be made writable through source control.}
it creates the directory C:/JDeveloper/mywork/Application1/.adf/META-INF/ with only a adf-config.xml file but NOT the connections.xml any one knows what is wrong?
Bellow is the stpes I m following. Its exactly what is written at the Oracle Fusion Middleware Developer´s guide for Oracle SOA Suite 11g Release 1(11.1.1) E10224-01
To create an Oracle BAM connection:
1. Select New from the File main menu in Oracle JDeveloper.
The New Gallery dialog opens.
2. Choose Connections from the General category.
3. Select BAM Connection in the Items list, and click OK.
The BAM Connection wizard opens.
4. Provide a name for the connection. Leave the Create Connection In selection as
Application Resources.
5. Click Next.
6. Enter the following connection information about the Oracle BAM instance.
7. Click Next.
8. Test the connection by clicking Test Connection. If the connection was successful,
the following message appears:
Passed.
9. Click Finish.
Note: You can create connections to Oracle BAM in the Oracle
JDeveloper Resource Palette as well as the Application Resources
panel of a specific application. It is recommended that you create these
connections in the Application Resources pane rather than the
Resource Palette.
Field Description
BAM Web Host Enter the name of the host on which the BAM report server and
Web server are installed. In most cases, the BAM Web host and
Oracle BAM Server host are the same.
BAM Server Host Enter the name of the host on which the Oracle BAM Server is
installed.
User Name Enter the Oracle BAM Server user name (typically bamadmin).
Password Enter the password of the user name.
HTTP Port Enter the port number or accept the default value of 8888. This is
the HTTP port for the BAM Web host.
RMI Port Enter the port number or accept the default value of 9085. The
RMI port is for the BAM report cache, which is part of the Oracle
BAM Server.
Use HTTPS Select this check box if you want to use secure HTTP (HTTPS) to
connect to the Oracle BAM Server during design time.
Otherwise, HTTP is used.
Message was edited by:
Mario.Mesquita

Ok that will be nice, but is not the case I dont want to read the tutorial, the problem is I already start to read and execute the tutorial you told me the problem is this tutorial it doesnt show how to do everything from scratch because you already have inside the zip file everything like xmls etc etc, and I want to get my DO and create the process myself, I dont want to get something that it is already done, this tutorial does not show for example how to create this composite.xml, this file it is already inside the zip file, so this way I just follow half of the process and dont learn how to make the whole process.
tks

Oracle BAM Installation

Hi All,
I want to install Oracle BAM without Oracle SOA suite. Planning to use ODI to feed BAM.
Is it possible to install BAM without SOA Suite?
Docs for ODI and BAM integration?
Regards,
Nataraj R.

Hi Nataraj
1. Sofware wise, NO, you do NOT have separate just Oracle BAM Installer or product. Oracle BAM is part of SOA/BPM Suite as far as I know. So first you had to Buy entire SOA Suite that includes Oracle BAM. Then run RCU and create schemas for orabam and mds.
2. While creating Domain using config wizard, you can select just Oracle BAM components. Remember I can have SOA Domain or BPM Domain without BAM. So vice versa should be possible. you can have just domain with only Oracle BAM Configured.
But software side, you had to buy entire SOA Suite. Check with Oracle Product team if they can sell only Oracle BAM which I am confident may not be available.
All above information if for latest suite of Oracle Products like version 11.x (SOA Suite 11.5 to SOA Suite 11.7). On Downloads link I did see separate Oracle BAM Installer BUT older version 10.3.5. So not sure if you can use old version and how old that one is. We all use Oracle BAM 11.x version that gets when we buy SOA/BPM Suite 11.x.
Thanks
Ravi Jegga

Oracle BAM : Tabs are not getting displayed

Hi
Just started working in Oracle BAM. I opened exisiting reports that came with the installation. Now when I click on Edit View -> "Data" button in the "View" Editor of an existing report ; the following tabs shld be displayed as per the BAM user guide : DataObjects, Fields, Filter, Drilling ...etc .
But none of the tabs are comming in the browser. In fact 7 empty tabs are dispalyed and are disabled.
When I click on "Properties" in the "View" editor ; all the tabs are comming and I can click on the tabs and edit the properties. But the tabs under "Data" option is not working.
I have deployed SOA suite 11.1.1.3 on wls 10.1.3. I am using IE 7. Any pointers will be helpful!!
Thanks

This link solved the problem for me.
REQD for Fresh BAM Install 11.1.1.3.0 -Data labels missing issue

Oracle BAM error BAM-01262

Hi,
I installed a WebCenter/SOA/BAM server, and the install is all ok. The BAM Server and SOA Server is all ok too.
I use the version 11.1.1.3.
Well..., when the user create a dashboard, it's all ok, but the automatic refresh doesn't work.
I see the log file and I cut this text above:
[2010-08-27T12:23:08.959-03:00] [bam_server1] [ERROR] [] [oracle.bam.reportcache] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: dba_marcos] [ecid: 0000Ieo9IeqDsXs5ojt1iY1CTbA80002AS,1:20420] [APP: oracle-bam#11.1.1] [dcid: 4e2baeab78ae1645:14238b0b:12aaeb09415:-7ff6-0000000000003958] ReportCache: ReportCacheServer.OpenViewSet: ADC exception=*BAM-01262: Active Data Cache Server exception in openViewset().*
at oracle.bam.adc.kernel.util.Util.getCacheException(Util.java:101)
at oracle.bam.adc.kernel.util.Util.getCacheException(Util.java:154)
at oracle.bam.adc.kernel.util.Util.getCacheException(Util.java:172)
at oracle.bam.adc.kernel.server.DataStoreServer.openViewset(DataStoreServer.java:1117)
at oracle.bam.adc.ejb.BamAdcServerBean.openViewset(BamAdcServerBean.java:898)
at sun.reflect.GeneratedMethodAccessor438.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
at oracle.bam.adc.ejb.BamAdcServerBean.interceptor(BamAdcServerBean.java:267)
at sun.reflect.GeneratedMethodAccessor402.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:106)
at sun.reflect.GeneratedMethodAccessor401.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy184.openViewset(Unknown Source)
at oracle.bam.adc.ejb.BamAdcServerBean_wf34ei_BamAdcServerRemoteImpl.openViewset(BamAdcServerBean_wf34ei_BamAdcServerRemoteImpl.java:1561)
at oracle.bam.adc.api.client.BamAdcClient.openViewset(BamAdcClient.java:969)
at sun.reflect.GeneratedMethodAccessor437.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.bam.common.remoting.BamEjbProxy.invoke(BamEjbProxy.java:209)
at $Proxy183.openViewset(Unknown Source)
at oracle.bam.adc.api.viewsets.Viewset.open(Viewset.java:75)
at oracle.bam.reportcache.data.DataStoreProxy.openViewSet(DataStoreProxy.java:98)
at oracle.bam.reportcache.engine.ViewSet.openViewSet(ViewSet.java:1519)
at oracle.bam.reportcache.engine.ViewSet.openSharedViewSet(ViewSet.java:547)
at oracle.bam.reportcache.engine.ViewSet.open(ViewSet.java:531)
at oracle.bam.middleware.reportcache.viewsetbuilders.ViewSetBuilderBase.open(ViewSetBuilderBase.java:74)
at oracle.bam.middleware.reportcache.viewsetbuilders.SingleRecordSetViewSetBuilder.build(SingleRecordSetViewSetBuilder.java:77)
at oracle.bam.reportcache.engine.ViewSet.<init>(ViewSet.java:320)
at oracle.bam.reportcache.engine.CacheEngine.openViewSet(CacheEngine.java:248)
at oracle.bam.reportcache.server.ReportCacheServer.openViewSet(ReportCacheServer.java:108)
at oracle.bam.reportcache.ejb.ReportCacheServerBean.openViewSet(ReportCacheServerBean.java:244)
at sun.reflect.GeneratedMethodAccessor511.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
at oracle.bam.reportcache.ejb.ReportCacheServerBean.interceptor(ReportCacheServerBean.java:192)
at sun.reflect.GeneratedMethodAccessor463.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:106)
at sun.reflect.GeneratedMethodAccessor401.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy194.openViewSet(Unknown Source)
at oracle.bam.reportcache.ejb.ReportCacheServerBean_vm1wm8_ReportCacheServerRemoteImpl.openViewSet(ReportCacheServerBean_vm1wm8_ReportCacheServerRemoteImpl
.java:930)
at sun.reflect.GeneratedMethodAccessor510.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.bam.common.remoting.BamEjbProxy.invoke(BamEjbProxy.java:209)
at $Proxy193.openViewSet(Unknown Source)
at oracle.bam.web.reportserver.data.DataManager.openViewSet(DataManager.java:218)
at oracle.bam.web.reportserver.views.kpi.KPI.openKPIViewSet(KPI.java:1567)
at oracle.bam.web.reportserver.views.kpi.KPI.getSnapshot(KPI.java:1594)
at oracle.bam.web.reportserver.views.kpi.KPI.initialize(KPI.java:267)
at oracle.bam.web.reportserver.views.kpi.KPI.initializeForGetAllViews(KPI.java:452)
at oracle.bam.web.reportserver.views.ViewStreamer.sendViewToClient(ViewStreamer.java:216)
at oracle.bam.web.reportserver.views.ViewStreamerWork.run(ViewStreamerWork.java:75)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The Oracle BAM Active Data Cache (Oracle BAM ADC) is active and work well.
I search the error in the web, but I don't found a solution.
Any idea?
Thank you in advance,
Braga

This problem was solved when I installed a new product version.

BAM error - during start oracle BAM

Hi,
I am getting the below mentioned error while starting Oracle BAM, i have installed BAM 10g release (10.3), there were no problems in installation. Any help will be highly appreciated.
Rgds,
Jay
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
Starting "Oracle BAM Active Data Cache"...
System error 1069 has occurred.
The service did not start due to a logon failure.
Starting "Oracle BAM Event Engine"...
System error 1069 has occurred.
The service did not start due to a logon failure.
Starting "Oracle BAM Plan Monitor"...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
Starting "Oracle BAM Report Cache"...
System error 1069 has occurred.
The service did not start due to a logon failure.
Press any key to continue . . .

Hi
Any particular reason , you haven't moved to BAM 11g ( 11.1.1.3.0).
This is the latest release for the product.
Regards
Payal

Oracle BAM 11g - Deployments and development questions

Hi!
I have few questions related to Oracle BAM 11g developement and deployment processes. We are going to use that together with Oracle SOA Suite 11g ( BPEL / BPM processes), and now my questions are related to development phase:
1. If we have two or more Oracle BAM developers with their own Oracle BAM server instances, and we would like to share our development work, should/can we you same database repository to share the reports, data objects?
2. How we can copy Oracle BAM Data Objects, Reports etc from one environment (dev) to other environments (test, accept test, integration test, production) ? In software deployment projects (like Spring or Grails web-projects) we have used version control system and CI to build packages to different environments etc. How is the Oracle BAM deployment process actually "planned to be" since it uses its database repository to store objects and reports ?
3. The Oracle BAM itself has nice reports etc (Oracle BAM Client) that can be used using IE browser. How if we have to show/include those reports from Oracle WebCenter Spaces ? Is it possible and how?

Hi,
Were you able to find the answer to your questions? Especially the one, showing BAM reports in Webcenter Spaces?

MailActivationAgent isn't robust within Oracle BPEL 10.1.3 release

Within the new Oracle BPEL 10.1.3 release the MailActivationAgent isn’t working as robust as in the Oracle BPEL 10.1.2. release.
The problem is that sometimes the emails are picked up correctly by the process from the IMAP mailbox, but sometimes not.
We tried already several things to solve this problem, but nothing worked out.
A list of actions we tried already to bypass this problem:
- sending mails to the IMAP mailbox using a different client than Outlook
- removed all tabs/whitespaces within account.xml mailbox config file, because
this was a known issue within release 10.1.2
- use a non-encrypted password field within the account.xml mailbox config file
We encountered this problem during a migration from release 10.1.2 to release 10.1.3.1.0 (Build 061009.0802).
We retested the executed scenarios once again on release 10.1.2, but on that release every mail within the IMAP mailbox is picked up correctly by the process.
Scenario
For a specific process we need to read out an IMAP mailbox, so therefore we have a MailActivationAgent within this process.
We analyzed the logs of the application server, and there the following messages are displayed:
<2006-12-04 15:08:25,546> <ERROR> <default.collaxa.cube.activation> <HeartBeatListenerJob::execute> Error while invoking onHeartBeat() method, exception is "Cannot load header".
Some snapshots of the code are attached below to get some insight within the process and code.
bpel.xml…
<activationAgents>
<activationAgent className="com.collaxa.cube.activation.mail.MailActivationAgent"
heartBeatInterval="60">
<property name="accountName">account</property>
</activationAgent>
account.xml
<mailAccount xmlns="http://services.oracle.com/bpel/mail/account">
<userInfo>
<displayName>Eneco Process lAyer</displayName>
<organization>iFactory</organization>
<replyTo>[email protected]</replyTo>
</userInfo>
<outgoingServer>
<protocol>smtp</protocol>
<host>10.126.16.73</host>
<port>25</port>
<authenticationRequired>false</authenticationRequired>
</outgoingServer>
<incomingServer>
<protocol>imap</protocol>
<host>10.126.20.8</host>
<port>143</port>
<email>IFACAORTA</email>
<password>CRYPT{IB3B7SrA3kMYHoBDzWwsEg==}</password>
<folderName>InBox</folderName>
</incomingServer>
</mailAccount>
The domain.log of the appserver
<2006-12-04 15:08:25,546> <ERROR> <default.collaxa.cube.activation> <HeartBeatListenerJob::execute> Error while invoking onHeartBeat() method, exception is "Cannot load header".
<2006-12-04 15:08:25,562> <ERROR> <default.collaxa.cube.activation> <HeartBeatListenerJob::execute> Error while invoking onHeartBeat() method, exception is "No content".

For some time it worked now ok, and suddenly after a restart of the SOA Suite process manager it didn't work anymore without doing anything on the process that is using the MailActivationAgent.
The error I've got is attached below:
<2006-12-05 15:06:04,351> <ERROR> <default.collaxa.cube.activation> <HeartBeatListenerJob::execute> Error while invoking onHeartBeat() method, exception is "Error creating mail account.
An exception occured while attempting to parse the mail account from the XML file "C:\oracle\products\10.1.3.1\OracleAS_1\bpel\domains\default\metadata\Mailservice\account.xml". The exception reported is: The XML data is invalid.
The XML data is invalid; the reason is "Begin van startelement wordt verwacht.".
Please verify xml data.

Is service registry a part of SOA suite?

Hi,
It is a bit unclear to me if service registry is a part of SOA Suite.
According to the SOA suite homepage (http://www.oracle.com/technologies/soa/soa-suite.html) it is not a SOA suite component.
However it is mentioned in the description of this SOA Suite forum(http://forums.oracle.com/forums/category.jspa?categoryID=13) and also on the homepage of SOA suite installation.
There are also some contradicting posts in this forum.
Can anyone clarify this issue?
TIA

Hi,
The UDDI registry is part of the SOA architecture. It is however a separate download and installation in respect to the Oracle SOA Suite package.
Kind regards,
H

RE: Oracle Enterprise Manager Extensibility 10g Release 4 (10.2.0.4) Guide

Hi:
- I have a question about the SNMP Receivelet code in this guide:
Oracle® Enterprise Manager Extensibility
10g Release 4 (10.2.0.4)
Part Number B40007-01
- Basically I copied the SNMP Receivelet code from the guide into a plug-in.
I was able to load the plug-in without any error messages, but no alerts are raised
when I send a trap.
- Could someone please tell me what port the snmp receivelet listens on?
- I tried ports: 3002, 1830, 3872 and 8002.
- Port 3002 was obtained from emd.properties
- Port 1830 was obtained from the OEM console
- What condition is necessary for agent to receive SNMP traps?
- My agent environment is:
[oracle@blade bin]$ ./emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.1.0
Protocol Version : 10.2.0.0.0
Agent is Running and Ready
[oracle@blade bin]$
- My metadata file is:
<?xml version="1.0"?>
<!DOCTYPE TargetMetadata SYSTEM "../dtds/TargetMetadata.dtd">
<TargetMetadata META_VER="1.001" TYPE="oracle_guide" >
<Display>
<Label NLSID="oracle_guide">Oracle CCA Application</Label>
</Display>
<Metric NAME="Response" TYPE="TABLE">
<Display>
<Label NLSID="oracle_guide_resp">Response</Label>
</Display>
<TableDescriptor>
<ColumnDescriptor NAME="Status" TYPE="NUMBER">
<Display>
<Label NLSID="guide_SNMP_resp_status">CCA SNMP SubAgent
Status</Label>
</Display>
</ColumnDescriptor>
</TableDescriptor>
<QueryDescriptor FETCHLET_ID="OSLineToken">

<Property NAME="perlBin" SCOPE="SYSTEMGLOBAL">perlBin</Property>
<Property NAME="scriptsDir" SCOPE="SYSTEMGLOBAL">scriptsDir</Property>
<Property NAME="command" SCOPE="GLOBAL">
%perlBin%/perl %scriptsDir%/osresp.pl
</Property>
<Property NAME="ENVEM_TARGET_NAME" SCOPE="INSTANCE">AgentAddr</Property>
<Property NAME="startsWith" SCOPE="GLOBAL">em_result=</Property>
<Property NAME="delimiter" SCOPE="GLOBAL">|</Property>
</QueryDescriptor>
</Metric>
<Metric NAME="interfaces" TYPE="TABLE">
<TableDescriptor>
<ColumnDescriptor NAME="name" TYPE="STRING" IS_KEY="TRUE"/>
<ColumnDescriptor NAME="type" TYPE="NUMBER" IS_KEY="FALSE"/>
<ColumnDescriptor NAME="status" TYPE="NUMBER" IS_KEY="FALSE"/>
<ColumnDescriptor NAME="configured_status" TYPE="NUMBER" IS_KEY="FALSE"/>
</TableDescriptor>
<PushDescriptor RECVLET_ID="SNMPTrap">
<Property NAME="MatchEnterprise" SCOPE="GLOBAL">1.3.6.1.4.1.529</Property>
<Property NAME="MatchGenericTrap" SCOPE="GLOBAL">6</Property>
<Property NAME="MatchSpecificTrap" SCOPE="GLOBAL">50</Property>
<Property NAME="MatchAgentAddr" SCOPE="INSTANCE">AgentAddr</Property>
<Property NAME="SeverityStatusOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.8</Property>
<Property NAME="KeyNameOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.31</Property>
<Property NAME="ContextTypeOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.3</Property>
<Property NAME="ContextConfigured_statusOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.7</Property>
<Property NAME="SeverityCode" SCOPE="GLOBAL">CRITICAL</Property>
</PushDescriptor>
</Metric>
<InstanceProperties>
<InstanceProperty NAME="AgentHost" CREDENTIAL="FALSE"
OPTIONAL="FALSE">
<Display>
<Label NLSID="oracle_guide_SNMP_agent_host">Hostname (SNMP Agent )
</Label>
</Display>
</InstanceProperty>
<InstanceProperty NAME="AgentAddr" CREDENTIAL="FALSE"
OPTIONAL="FALSE">
<Display>
<Label NLSID="oracle_guide_SNMP_agent_addr">IP Address (SNMP Agent)
</Label>
</Display>
</InstanceProperty>
<InstanceProperty NAME="CommunityString" CREDENTIAL="TRUE"
OPTIONAL="TRUE">
<Display>
<Label NLSID="oracle_guide_SNMP_community_string">SNMP Read
Community String (Default: public)</Label>
</Display>
public
</InstanceProperty>
<InstanceProperty NAME="Timeout" CREDENTIAL="FALSE"
OPTIONAL="TRUE">
<Display>
<Label NLSID="oracle_guide_SNMP_timeout">SNMP Timeout (Default: 30
seconds)</Label>
</Display>
30
</InstanceProperty>
</InstanceProperties>
</TargetMetadata>
bash-3.00#
- My collection file is:
<!DOCTYPE TargetCollection SYSTEM "../dtds/TargetCollection.dtd">
<TargetCollection TYPE="oracle_guide">
<CollectionItem NAME = "Response">
<Schedule>
<IntervalSchedule INTERVAL = "5" TIME_UNIT = "Min"/>
</Schedule>
<Condition COLUMN_NAME="Status"
CRITICAL="0"
WARNING="NotDefined"
OPERATOR="EQ"
OCCURRENCES="1"
MESSAGE="%target% is unreachable or is down."
MESSAGE_NLSID="oracle_guide_response_status"
CLEAR_MESSAGE="%target% is up."
CLEAR_MESSAGE_NLSID="oracle_guide_response_status_clear"/>
</CollectionItem>
</TargetCollection>
bash-3.00#
Thanks
John
Edited by: user8826739 on Feb 23, 2010 7:12 AM

Looks like this was also posted 4 messages above ... follow the anwers there.
Please only post the question once ... reposted will not get any answers you wouldn't have gotten anyway.
That just makes it hard for other users to follow all the information.
Dave

Oracle BAM 11g : bam-rcu.bat fails

Hi all,
When installing BAM 11g (tp4 download), & when i run the bam-rcu.bat, it strucks in between & throws the following error :
D:\BAM\BAM_OC4J_HOME\bin>bam-rcu.bat
Buildfile: D:\BAM\BAM_OC4J_HOME\bin\..\install\bam\rcu-tasks.xml
create-bam-schema:
[echo] bam.jdbc.connectstring=10.176.231.205:1521:aih1
[echo] bam.jdbc.url=jdbc:oracle:thin:@10.176.231.205:1521:aih1
[echo] bam.db.user=ORACLEBAM
[echo] bam.db.password=bam
drop-and-create-bam-user:
[echo] == sqlplus 'vhmanager/welcome_1 as sysdba' @dropuser_bam_oracle.sql ORACLEBAM ==
[exec]
[exec] SQL*Plus: Release 10.1.0.4.2 - Production on Thu Jun 12 00:25:55 2008
[exec]
[exec] Copyright (c) 1982, 2005, Oracle. All rights reserved.
[exec]
[exec]
[exec] Connected to:
[exec] Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
[exec] With the Partitioning, OLAP and Data Mining options
[exec]
[exec] old 1: DROP USER &bam_user CASCADE
[exec] new 1: DROP USER ORACLEBAM CASCADE
[exec]
[exec] User dropped.
[exec]
[exec] SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
[exec] With the Partitioning, OLAP and Data Mining options
[echo] == sqlplus 'vhmanager/welcome_1 as sysdba' @createuser_bam_oracle.sql ORACLEBAM bam SYSTEM TEMP ==
[exec]
[exec] SQL*Plus: Release 10.1.0.4.2 - Production on Thu Jun 12 00:25:56 2008
[exec]
[exec] Copyright (c) 1982, 2005, Oracle. All rights reserved.
[exec]
[exec]
[exec] Connected to:
[exec] Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
[exec] With the Partitioning, OLAP and Data Mining options
[exec]
[exec] old 1: CREATE USER &bam_user identified by &bam_passwd
[exec] new 1: CREATE USER ORACLEBAM identified by bam
[exec] old 2: default tablespace &def_tablespace
[exec] new 2: default tablespace SYSTEM
[exec] old 3: temporary tablespace &temp_tablespace
[exec] new 3: temporary tablespace TEMP
[exec]
[exec] User created.
[exec]
[exec] old 1: grant connect, resource to &bam_user
[exec] new 1: grant connect, resource to ORACLEBAM
[exec]
[exec] Grant succeeded.
[exec]
[exec] SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
[exec] With the Partitioning, OLAP and Data Mining options
sql-based-cacheinit:
[copy] Copying 1 file to D:\BAM\BAM_OC4J_HOME\rcu\integration\bam\sql
[sql] Jun 12, 2008 12:25:57 AM oracle.jdbc.driver.OracleDriver registerMBeans
[sql] SEVERE: Found Oracle Apps MBeanServer but the getMBeanServer method threw an exception.
[sql] java.lang.reflect.InvocationTargetException
[sql] at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[sql] at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[sql] at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[sql] at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
[sql] at oracle.jdbc.driver.OracleDriver.registerMBeans(OracleDriver.java:274)
[sql] at oracle.jdbc.driver.OracleDriver$1.run(OracleDriver.java:224)
[sql] at java.security.AccessController.doPrivileged(Native Method)
[sql] at oracle.jdbc.driver.OracleDriver.<clinit>(OracleDriver.java:220)
[sql] at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[sql] at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[sql] at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[sql] at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
[sql] at java.lang.Class.newInstance0(Class.java:350)
[sql] at java.lang.Class.newInstance(Class.java:303)
[sql] at org.apache.tools.ant.taskdefs.JDBCTask.getDriver(JDBCTask.java:379)
[sql] at org.apache.tools.ant.taskdefs.JDBCTask.getConnection(JDBCTask.java:319)
[sql] at org.apache.tools.ant.taskdefs.SQLExec.execute(SQLExec.java:414)
[sql] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[sql] at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
[sql] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[sql] at java.lang.reflect.Method.invoke(Method.java:585)
[sql] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[sql] at org.apache.tools.ant.Task.perform(Task.java:348)
[sql] at org.apache.tools.ant.Target.execute(Target.java:357)
[sql] at org.apache.tools.ant.Target.performTasks(Target.java:385)
[sql] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[sql] at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
[sql] at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[sql] at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:416)
[sql] at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:105)
[sql] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[sql] at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
[sql] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[sql] at java.lang.reflect.Method.invoke(Method.java:585)
[sql] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[sql] at org.apache.tools.ant.Task.perform(Task.java:348)
[sql] at org.apache.tools.ant.Target.execute(Target.java:357)
[sql] at org.apache.tools.ant.Target.performTasks(Target.java:385)
[sql] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[sql] at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[sql] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[sql] at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[sql] at org.apache.tools.ant.Main.runBuild(Main.java:698)
[sql] at org.apache.tools.ant.Main.startAnt(Main.java:199)
[sql] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[sql] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[sql] Caused by: java.lang.ClassNotFoundException: oracle.as.jmx.framework.standardmbeans.spi.JMXFrameworkProvider
Impl
[sql] at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
[sql] at java.security.AccessController.doPrivileged(Native Method)
[sql] at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
[sql] at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
[sql] at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
[sql] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
[sql] at java.lang.Class.forName0(Native Method)
[sql] at java.lang.Class.forName(Class.java:242)
[sql] at oracle.as.jmx.framework.PortableMBeanFactory.init(PortableMBeanFactory.java:1687)
[sql] at oracle.as.jmx.framework.PortableMBeanFactory.<init>(PortableMBeanFactory.java:156)
[sql] at oracle.as.jmx.framework.PortableMBeanFactory.<init>(PortableMBeanFactory.java:164)
[sql] ... 46 more
BUILD FAILED
D:\BAM\BAM_OC4J_HOME\install\bam\rcu-tasks.xml:90: The following error occurred while executing this line:
D:\BAM\BAM_OC4J_HOME\install\bam\rcu-tasks.xml:103: java.sql.SQLException: ORA-01017: invalid username/password; logon d
enied
Total time: 6 seconds
Any idea why this error ? & do i need to set anything ?
Regards,
Subba

It's weird - it says it created the db user fine and then when it goes to use it, it says invalid credentials.....maybe you can find out more from the logs. Look in
D:\BAM\BAM_OC4J_HOME\install\bam\bam-config.log
and also
D:\BAM\BAM_OC4J_HOME\j2ee\home\log\bam\oraclebam.log
Also, you are using a database version that is explicitly listed as excluded from being supported in 11 - it's hard to say whether that is the reason for this error. If you could upgrade or switch to XE that would be worth trying.
Heidi.

Oracle BAM Authentication Question

We are facing a strange problem related to Oracle BAM authentication and I'd like to ask for opinions or suggestions.
- We have a BAM Server called MYSERVER
- MYSERVER is a Win2003 and BAM was installed using MYSERVER\Administrator account
- We have a domain called MYDOMAIN
- MYSERVER is part of domain MYDOMAIN and this domain is registered in MYSERVER as a trusted domain.
- We have four user groups created in domain, not in bam server:
1) MYDOMAIN\bamAdmin
2) MYDOMAIN\bamArchitect
3) MYDOMAIN\bamDesigner
2) MYDOMAIN\bamUser
- In Windows 2003 we added the following users to the groups below:
user MYDOMAIN\adm was added to group MYDOMAIN\bamAdmin
user MYDOMAIN\arch was added to group MYDOMAIN\bamArchitect
user MYDOMAIN\des was added to group MYDOMAIN\bamDesigner
user MYDOMAIN\usr was added to group MYDOMAIN\bamUser
- In Administrator>Login Management
We didn't create login for users, only groups just described:
MYDOMAIN\bamAdmin
MYDOMAIN\bamArchitect
MYDOMAIN\bamDesigner
MYDOMAIN\bamUser
- In Administrator>Roles Management
We selected each Role and added the following groups
Administrator > MYDOMAIN\bamAdmin
Report Architect > MYDOMAIN\bamArchitect
Report Creator > MYDOMAIN\bamDesigner
Report Viewer > MYDOMAIN\bamUser
- After that, we return to Administrator > Login Management to review groups
There is an yellow question mark indicating bam cannot validate this login in domain controller.
This login is not currently known to be a valid login.
We click in one of the described groups, such as
MYDOMAIN\bamUser
And then in "View Roles" link.
We receive the following message
ADC Server exception in GetUserGroups(): 3.
Source: "ActiveDataCache" ID: "ADCServerException"
Logon failure: unknown user name or bad password
Source: "Oracle.BAM.Common.Core"
Sometimes we get: "Network path not found" and finally we get this message:
"The account used to run the Oracle BAM Active Data Cache does not have permission to retrieve the list of groups for this user. Contact your network administrator."
- If MYDOMAIN\usr that was added to group MYDOMAIN\bamUser try to access BAM Viewer module or bam home page (http://myserver/oracleBam), he receives the same error in welcome screen.
- User MYDOMAIN\usr can login to MYSERVER server in domain MYDOMAIN, so server recognizes the domain and user.
- In Windows NT Alert Viewer we have several errors/warnings registered, telling that BAM could not validate user/login and also "RPC Server Unavailable" errors.
- I tried changing ADC Service user credentials to MYDOMAIN\Administrator, but ADC Service didn't start anymore, so we have to reconfigure to MYSERVER\Administrator.
- In ADC Log we have several messages indicating BAM could not validate user:
2008-01-22 17:26:11,875 [User Validation Thread] WARN - ActiveDataCache Caught exception while validating user MYDOMAIN\usr: Logon failure: unknown user name or bad password
And when we changed credentials to MYDOMAIN\Administrator we got messages indicating bam stores some type of key/encrypt information by user who installed product (MYSERVER/Administrator):
2008-01-22 16:49:16,062 [1484] ERROR - ActiveDataCache DPAPI was unable to decrypt data. CryptUnprotectData failed. Error -2146893813: Key not valid for use in specified state.
Somebody may point us what could be wrong, perhaps a tip or doc about WINDOWS/BAM auth integration?
Metalink has few information about that, such as Note: 412555.1, but from network view it seems to be correct because we may log on MYDOMAIN\usr to MYSERVER successfully.
Bam could integrate to NT user authentication seamlessly, but it seems to me that it's harder and tricky than we thought.
Any ideas?
Thank you in advance,
Rogério

Hi,
Windows services running as local user can not do domain user authentication (even when machine is on that domain)
You will need to change ADC Service user credentials to MYDOMAIN\Administrator. If you just do this only in services, service wont start because the database passwords in config files are encrypted as original user and can not be decrypted by new user.
See "Working with Post-Install Password Changes and Password Expiration Policies" in the BAM Install Guide (In chapter 3 under Additional Configuration Settings) to change the config files. And also add MYSERVER\Administrator to BAM Administrator group before change.
The easiest may be to just reinstall as user MYDOMAIN\Administrator.
Thanks
Ranga

Oracle BPEL Process Manager 10.1.3.x sensors and Oracle BAM Server 11g TP4

In Oracle Fusion Middleware Developers Guide for Oracle SOA Suite in section 42.5 there is the next:
"You can also use Oracle BPEL Process Manager 10.1.3.1 sensor actions to publish sensor data as data objects on Oracle BAM Server 11g"
Is it really possible?

Hi, Please post this in BPEL forum, not here.
Regards,
Priyanka GES

Deploying bpel sensors as part of SOA archive

Oracle documentation (http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/bp_sensors.htm) mentions about adding custom sensors as part of bpel project to have it deployed as part of SOA archive. However on following steps I am getting java.lang.ClassNotFoundException exception.
Can anyone guide me what I am missing ?
Please note that by following instructions as mentioned in http://mazanatti.info/index.php?/archives/71-SOA-Suite-11g-fabric-logging-with-BPEL-sensors.html I am able to get sensors working but it is separate offline deployment for sensors.
Thanks.

Hi Ravi,
I used the below script to deploy the ear.
<wldeploy action="deploy" name="${application}" source="${apps.root}/${application}/deploy/${application}-${apps.version}.ear"
     user="${deploy.user}" upload="true"
     password="${deploy.password}" nostage="true" verbose="true"
     adminurl="t3://${deploy.host}:${deploy.port}" targets="${deploy.target}" />
and below target to generate ear file.
<target name="ear" >
     <echo>Building the ear file</echo>
     <ear destfile="${apps.root}/${application}/deploy/${application}-${apps.version}.ear" appxml="${apps.root}/${application}/adfmsrc/META-INF/application.xml">
     <fileset dir="${apps.root}/${application}/deploy" includes="*.war" />
</ear>
But I am getting the error
Target state: deploy failed on Server AdminServer
java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
I get the same error ih JDeveloper, If i try to deploy the war from project. But if i deploy it from Application view then there will be no error.
There are lots of libraries, if I had to manually add it to the classpath in Ant script.
Any idea to solve this issue from Ant scripts.
Regards,
Subhashini

Oracle BAM part of SOA release?

Similar Messages

Maybe you are looking for