Oracle Beehive Communicator error on BlackBerry
Hi,
I've installed Oracle Beehive Communicator 2.0.1.3.0 on my BlackBerry.
And the problem is that it just works if I have a WiFi connection enabled. If I'm not connected to a WiFi network I'm not able to connect to Beehive communicator.
Any idea about what could be the problem?
Thanks
Most likely you don't have your gprs tcp settings set.
Similar Messages
-
Error when install Oracle Beehive on Windows
Hi All,
I try to install and configure Oracle Beehive 1.2.2 on Win Server 2003 EE sp1 against Oracle 10.2.0.4 DB. The installation was succeed, but the configurations were failed in preparation phase.
This is the error message:
Launching tool "Oracle Beehive Product Preparation"
Invocation timestamp: 8:33:08 AM
Executing command: oracle.ocs.install.plugins.product.main.ClonePlugin ${enc_old_admin_passwd} ${enc_admin_passwd} ${obf_db_admin_passwd} D:\oracle\beehive 7780 6103 6203 6006 false Beehive_home_1 SeatechINS sys 192.168.1.6 1522 ito /var/opt/oracle/oraInst.loc
1 file(s) copied.
1 file(s) copied.
Tool "Oracle Beehive Product Preparation" returned Failed status.
=============================================================
Please help me on this.
Thanks and Regards,
PhongHi,
I would not to give the impression to make a standart answer but 10.2.0.4 is not yet certified to be used with Beehive. - Only 10.2.0.3 - Even is alot of patch we have to install on top of the 10.2.0.3 are included on 10.2.0.4 all are not there.
As well when you specified your password
- for the db you need at least one number
- for Beehive Beedadmin account you need at least on uppercase character and one number
Hope that help,
Frederic Daurelle -
Error on "Oracle Beehive Database Configuration - Beehive Schemas"
hi
i got the error "Errors with activating subs ORA-31425: subscription does not exist -31425" in the "Oracle Beehive Database Configuration - Beehive Schemas" stage.
the log file shows this:
2008-11-06_22-52-37 info sql command took 5 seconds
2008-11-06_22-52-37 info db logfilename dblog.2008-11-06_22-52-37
2008-11-06_22-52-37 info oracle home C:\oracle\product\1.4.1.0.0\beehive_2
2008-11-06_22-52-37 info Connecting BEE_code/*****@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=paty.xxxx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=bee)))
2008-11-06_22-52-37 info Going to run SQL command @C:\oracle\product\1.4.1.0.0\beehive_2\beehive\db\search\src\sqlcode\plsql\ss_cdc_sub_activate.sql
2008-11-06_22-52-37 info DEFINE BDB=C:\oracle\product\1.4.1.0.0\beehive_2\beehive\db\
2008-11-06_22-52-37 info Output from SQL process:
Connected.
Errors with activating subs ORA-31425: subscription does not exist -31425
PL/SQL procedure successfully completed.
2008-11-06_22-52-37 info sql command took 0 seconds
2008-11-06_22-52-37 error schema install failed
Tool "Oracle Beehive Database Configuration - Beehive Schemas" returned Failed status.
=============================================================
i am using oracle 11g as database server.
No other warnings or error are visible.
i try the install on Linux and Windows and the error is the same.
any advice?
thanksHello,
Do you have applied all the recommended patches on top of your 11.1.0.6?
Please check the value of the parameter processes and be sure it is enough high (>500)
For CDC issue, please check the following metalink note as well, and apply the recommendations - Note 737948.1
As well, have a look on your limits.conf file to be sure it maches with the kernel recommendations.
Are you installing Beehive and the database on the same machine?
Thanks
Fred -
App World Web Plugin Error
An error has occurred communicating with the BlackBerry App World Client.
Please help me with this problem. I have a new Blackberry Storm 2. When I sign in, it asked me to get the BB appworld browser plug-in and connect my smartphone. So, i did connect it. Then, this message kept on popping out. I don't know how to fix it.Okay. this is what I do.
I go onto http://appworld.blackberry.com/webstore/ & sign in. I then connect my phone & enter the device password. As soon as I do that, this comes up -> App World Web Plugin Error
An error has occurred communicating with the BlackBerry App World Client.
I don't know what's the problem & I've been searching for a solution but to no avail. -
Oracle Beehive 2.0.1 and 11.2.0.2 db
Happy New Year....
Has anyone succesfully installed Beehive 2.0.1.0 against a 64-bit 11.2.0.2 db running on OEL5U5?
Beehive installation is on 32-bit OEL5U5 and runs very well until the Framework Configuration phase..
./beectl add_user_subscription_templates dir /opt/app/oracle/product/Middleware/Oracle_BHive/beehive/seed/uss reentering --log_level FINEST
returns
CsiException:oracle.csi.CsiIllegalNullArgumentException: stringId is null.:Class: ExceptionMetadataFactory
ErrorCode: ErrorCode:[BEEU-02114,INFO,Subscription template creation encountered an error.]
DB server:
[oracle@xxxxxx ~]$ uname -a
Linux xxxxxx 2.6.32-100.0.19.el5 #1 SMP Fri Sep 17 17:51:41 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Beehive Server:
[oracle@xxxxx ~]$ uname -a
Linux xxxxx 2.6.18-194.el5PAE #1 SMP Mon Mar 29 20:19:03 EDT 2010 i686 i686 i386 GNU/Linux
From Beehive Installation Guide Release 2 (2.0) for Linux x86 --http://download.oracle.com/docs/cd/E16671_01/bh.200/e16641/db_req.htm#BGBDHFDD
General Requirements - Oracle Beehive requires an existing database with the following characteristics:
Uses Oracle Database 11g Release 1 (11.1.0.7) Enterprise Edition or later,
+
Upgrading Oracle Database 11g Release 1 to Oracle Database 11g Release 2 - If you upgrade Oracle Database 11g Release 1 (11.1.0.7) to Oracle Database 11g Release 2 (11.2) after installing Oracle Beehive, follow these steps:
Any help is appreciated.
HKTThanks.
This is a fresh install of 2.0.1.0 on a separate 64-bit DB server and 32-bit Beehive server
[oracle@xxxxxx ~]$ uname -a
Linux xxxxxx 2.6.32-100.0.19.el5 #1 SMP Fri Sep 17 17:51:41 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Beehive Server:
[oracle@xxxxx ~]$ uname -a
Linux xxxxx 2.6.18-194.el5PAE #1 SMP Mon Mar 29 20:19:03 EDT 2010 i686 i686 i386 GNU/Linux
The nodename(S) xxxxx are masked.
The 2.0.1.4 patch expects an existing Beehiveinstallation in the inventory...
Edited by: 824771 on Dec 31, 2010 9:13 PM -
I'm having the following issue when trying to login to Hyperion Workspace (in EPM 11.1.2) . I get to the login page fine, and when I login it takes me into Workspace, but a warning immedately pops up saying *"Namespace Communication Error".* I can dismiss this warning by hitting 'OK', but after that I cannot navigate to any of the Workspace areas like the Explore directory or the Scheduler directory. If I try to go to "Explore", I get an error saying *"Invalid or could not find module configuration*". If I try to go to the Batch Scheduler page, I get an error saying *"Handler : 'com.hyperion.reporting.web.scheduler.SchedulerListHandler' not found for module with id : reporting.scheduler".* I find that if I restart the EPM and Foundation services, Workspace starts functioning normally again, but this is shortlived. I.e. If I log out and try to login after 10-15 minutes, I again get all of the above warnings and errors!
Has anyone experienced this problem? I appreciate any guidance with this.
rgds,
AxeI have installed Oracle EPM 11.1.2.0 on different OS like windows7/RedhatEL 5.0 succesfully.But when when i log into workspace i get the error NAMESPACE COMMUNICATION ERROR(on windows) and then it hangs for few minutes and then it will take to workspace.(It can be a defect with Orcale EPm itself.)
So,I tried to reconfigure the web server using IIS and then restarted the Foundation services the problem got solved for me.I no more see the NameSpace Communication error.
Worth trying. -
Oracle Beehive Framework Configuration return faliled status(When install)
Hi everybody,
I faced a problem when install Oracle Beehive. All installs of software done, but in next step (Configuration), all configurations done except "Orcl Beehive Frmwork Config". I didn't know what happened, and how to solve this error. Full Error describe below:
Launching tool "Oracle Beehive Framework Configuration"
Invocation timestamp: 1:49:09 PM
Executing command: oracle.ocs.install.plugins.product.main.BeeCfgPlugin ${admin_passwd} ${schema_passwd} ${site_key} C:\oracle\product\1.5.1.0.0\beehive_1 portal.neo.com.vn (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=portal.neo.com.vn)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=oracle))) 3042 21300 21401 21451 orabeehive NEO BeehiveSite FINE SERVER_ONLY true 2 1
[INFO ] [2009-09-10 13:49:09] [main Line 189 ] [---------------------------------------------------------------]
[INFO ] [2009-09-10 13:49:09] [main Line 190 ] [ BEEHIVE CONFIGURATION ASSISTANT (BCA) STARTED ]
[INFO ] [2009-09-10 13:49:09] [main Line 191 ] [---------------------------------------------------------------]
[INFO ] [2009-09-10 13:49:09] [main Line 192 ] [ ]
[INFO ] [2009-09-10 13:49:09] [main Line 193 ] [ Start time : 2009-09-10 13:49:09]
[INFO ] [2009-09-10 13:49:09] [main Line 194 ] [ Command Line : C:\oracle\product\1.5.1.0.0\beehive_1\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe C:\oracle\product\1.5.1.0.0\beehive_1\beehive\assistants\bin\BeehiveConfigurationAssistant.pl -primaryTemplateId SERVER_ONLY -availablePhysicalMemory 2GB -availableNumberOfProcessors 1 -ORACLE_HOME C:\oracle\product\1.5.1.0.0\beehive_1 -hostname portal.neo.com.vn -connectString (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=portal.neo.com.vn)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=oracle))) -BTIport 3042 -OMBport 21300 -MXport 21401 -SecureMXport 21451 -enterpriseName orabeehive -organizationName NEO -siteName BeehiveSite -userFirstName BEEAdmin -userLoginid beeadmin -logLevel FINE -firstInstance true ]
[INFO ] [2009-09-10 13:49:09] [main Line 195 ] [ ]
[INFO ] [2009-09-10 13:49:09] [main Line 196 ] [---------------------------------------------------------------]
[BEECTL] [Specify the value for secure option --oc4j_admin_password (The text you type will not be displayed as it is entered):
[BEECTL] [
[BEECTL] [beectl command failed. See the log file "C:\oracle\product\1.5.1.0.0\beehive_1\beehive\logs\beectl\2009.09.10\beectl_modify_deployment_structure_13_49_19+0700.txt" for more details.
[BEECTL] [Connection Unavailable.
[BEECTL] [
[SEVERE ] [GlobalLib::Executor::executeAndReturnDataIfSuccess Line 224 ]
[SEVERE ] [Start Message]
[SEVERE ] [ beectl.exe command execution failed. beectl.exe command returned exit code : 1]
[SEVERE ] [ 1]
[SEVERE ] [End Message]
[INFO ] [2009-09-10 13:49:23] [GlobalLib::Logger::closeLogger Line 622 ] [Closing the log file : C:\oracle\product\1.5.1.0.0\beehive_1\beehive\logs\config\BeehiveConfigurationAssistant\09.10.2009\BeehiveConfigurationAssistant_13_49_09.log]
Tool "Oracle Beehive Framework Configuration" returned Failed status.Anyone help me please!
My Envs:
OS: window xp
Oracle db: 10gR2.03
Thanks in advance.
LuyenHello
I see [BEECTL] [Connection Unavailable.
could you
- test connecting to your database using the exact same settings that you provided to the beehive installer , using a tool like SQLDeveloper or similar ?
- print out C:\oracle\product\1.5.1.0.0\beehive_1\beehive\logs\beectl\2009.09.10\beectl_modify_deployment_structure_13_49_19+0700.txt -
NiConnect Unsuccessful, Communication error, CPI-C function: CMINIT
Hello,
NiConnect Unsuccessful, Return Code: -0012
> Host: 10.4.0.34
> Service: sapgw00
Communication error, CPIC return code 020, SAP return code 666
> CPI-C function: CMINIT(SAP)
SM21 is advising frequently of that problem.
I also receive those messages:
Communication error, CPIC return code 002, SAP return code 679
> CPI-C function: CMINIT(SAP)
Communication error, CPIC return code 020, SAP return code 497
> CPI-C function: CMINIT(SAP)
All those errors are not beeing received every XXX minutes, the more we use SAP, the more we get those communications errors.
My system Specifications are:
R/3 release 4.6C
OS: SunOS
DB: Oracle
Thanks in advanceGood day,
With reference to SAP Note Note 63347 - List: CPIC error codes
your error code is listed as GW_CONNECT_FAILED 236 No connection to the gateway
GW_CONNECT_FAILED 236 No connection to the gateway
So if I were you I would investigate in this direction.
Kind Regards,
Johan -
Socket communication error in OBIEE 10g.
Hi
I have below error in nqserver log by which i am unable to connect admin tool and presentation service. I am using OBIEE 10g.
[nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall
Please Suggest.Hi ,
Its not about the no. of connection pools u have in ur RPD .Its the maximum number of connections allowed for this connection pool. The default is 10. This value should be determined by the database make and model
and the configuration of the hardware box on which the database runs as well as the number of concurrent users who require access.
Ref :
http://siebel.ittoolbox.com/groups/technical-functional/siebel-analytics-l/oracle-bi-server-stops-automatically-after-some-time-3645235
Just give it try . -
Oracle Secure Backup error: 'No such file or directory'
Hi,
could you help me to fix the following issue?
RMAN> run { ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='SBT_LIBRARY=C:\windows\
system32\orasbt.dll' ; backup database format 'CF_%d_%T_s%sp%pt%t'; }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=8 device type=SBT_TAPE
channel c1: Oracle Secure BackupStarting backup at 26-OCT-09
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
input datafile file number=00001 name=C:\APP\AIME\ORADATA\ORCL\SYSTEM01.DBF
input datafile file number=00002 name=C:\APP\AIME\ORADATA\ORCL\SYSAUX01.DBF
input datafile file number=00003 name=C:\APP\AIME\ORADATA\ORCL\UNDOTBS01.DBF
input datafile file number=00004 name=C:\APP\AIME\ORADATA\ORCL\USERS01.DBF
input datafile file number=00005 name=C:\APP\AIME\PRODUCT\11.2.0\DBHOME_1\DATABA
SE\TBS_5.F
channel c1: starting piece 1 at 26-OCT-09
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on c1 channel at 10/26/2009 00:20:54
ORA-19506: failed to create sequential file, name="CF_ORCL_20091026_s10p1t701223
652", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_cat_query: Query for piece CF_ORCL_20091026_s10p1t701223652 failed.
(Oracle Secure Backup error: 'No such file or directory').
Thanks,
junYou can work entirely in Xcode by using the command-line tool template in C. Xcode > File > New > Project > Command-Line Tool > Next > Language: C > Next > Create.
If you do want to work on the command line, you may as well just use the "clang" program instead. The "gcc" tool is just a compatibility tool for existing scripts that are expecting the actual "gcc" program. Apple hasn't used the real "gcc" for years. (Read up on the GPLv3 for more information.)
The gcc/clang arguments are the same. The "-c" flag instructs the compiler to only compile a single .c file into a .o object file. It won't create an executable. If you are only compiling a single source file, just omit the "-c" flag and the compiler will create an executable named "a.out" that you can run by typing "./a.out". You can specify "-o <executable name>" if you want to specify a name. Once you get more than a handful of source files, using the terminal starts to become a hassle. At that point, you definitely want to start using Xcode.
I'm not sure why you would try to compile "helloworlddot1.c" and then get an error message about "filename.c". Something else is wrong.
If you are working in the Terminal, it is easiest to use the "cd" command to move into the same directory as your source files. Then you don't have to keep typing the full path.
It is hard to say what the "best" community is. There are many to choose from. -
Hi,
I have deployed JMS application on Oracle 9i Application Server. I have made the necessary configurations in jms.xml(eg., Setting the queue connection factory and the name of the queue). Now when I try to run the client application I get the following error.
JMS communication error = Unable to connect to JMSServer (localhost/127.0.0.1:9127)
The JMS server is running on port 9127....
The rmi server is running on port 23791...
Can anyone help me out as to how this problem could be resolved ?
SirishaHi
Did you try changing jms.xml to point to the real ip instead of host="localhost" ?
sometimes it works.
g'day
nimo -
Can any1 plz help...!
I am unable to start presentation services...! I am currently using windows server 2003 service pack 2. I tried configuring scheduler after which I got the message:
"Windows could'nt start Oracle BI Presentation server on local computer. For more information review the system event log. If this is a non-microsft service, contact the service vendor, and refer to service-specific error code -1."
I am getting these 2 errors:
In nqserver.log shows below error
[nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall.
In nqscheduler.log shows below error
[nQSError: 12002] Socket communication error at call=: (Number=10048) Only one usage of each socket address (protocol/network address/port) is normally permitted.
I have changed scheduler port (in Job manager-->file-->configure options..>schedule-->general tab) to an available open port since 9705 is not available. I also updated port number in instanceconfig.xml file.
Any suggestions would be really appreciated.have you seen the blog of John about this? http://obiee101.blogspot.com/2008/08/obiee-configuring-configuring-scheduler.html
hope this heps -
Can any1 plz help...!
I am unable to start presentation services...! I am currently using windows server 2003 service pack 2. I tried configuring scheduler after which I got the message:
"Windows could'nt start Oracle BI Presentation server on local computer. For more information review the system event log. If this is a non-microsft service, contact the service vendor, and refer to service-specific error code -1."
I am getting these 2 errors:
In nqserver.log shows below error+
[nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall.
In nqscheduler.log shows below error_
[nQSError: 12002] Socket communication error at call=: (Number=10048) Only one usage of each socket address (protocol/network address/port) is normally permitted.
I have changed scheduler port (in Job manager-->file-->configure options..>schedule-->general tab) to an available open port since 9705 is not available. I also updated port number in instanceconfig.xml file.
Any suggestions would be really appreciated.user12970693 wrote:
Can any1 plz help...!Gawsh. That's awful.
I wonder whether people who deal primarily with BI Server might be able to help you better than people who deal primarily with the database?
http://forums.oracle.com/forums/category.jspa?categoryID=145
I am unable to start presentation services...! I am currently using windows server 2003 service pack 2. I tried configuring scheduler after which I got the message:
"Windows could'nt start Oracle BI Presentation server on local computer. For more information review the system event log. If this is a non-microsft service, contact the service vendor, and refer to service-specific error code -1."
I am getting these 2 errors:
In nqserver.log shows below error+
[nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall.
In nqscheduler.log shows below error_
[nQSError: 12002] Socket communication error at call=: (Number=10048) Only one usage of each socket address (protocol/network address/port) is normally permitted.
I have changed scheduler port (in Job manager-->file-->configure options..>schedule-->general tab) to an available open port since 9705 is not available. I also updated port number in instanceconfig.xml file.
Any suggestions would be really appreciated.On first guess, I'd almost think some anti-virus or firewall is haunting that machine. -
TNS:internal network communication error at OCI call OCIServerAttach
hi,
am using OBIEE 11g, i have made a new repository in obiee and when i done my analysis phase i checked the result and i recived an error :
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 17001] Oracle Error code: 12157, message: ORA-12157: TNS:internal network communication error at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
i made the changes in TNS but nothing happened, any suggestion ??
thanx..Hi Guys,
I got the same error message. I can see the data in the physical layer. Once i import my repository via weblogic, i can see the subject areas and all its related filed in Analysis section.
However i cannot view any data for any columns. Error;
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
SQL Issued: SELECT 0 s_0, "Invoices"."Customer Name"."ACCOUNT_NAME" s_1 FROM "Invoices" FETCH FIRST 65001 ROWS ONLY -
Hi, When I try to run any reports in Oracle Answers I am getting the following error:
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred.
nQSError: 12002 Socket communication error at call=recv: (Number=10038) An operation was attempted on something that is not a socket. (HY000)
When I try to issue a 'Direct Database Request' from Answers, it is working fine and I can see the results. The error is occuring only when I select any columns from the Presentation Catalog and try to run the Adhoc report.
Please could you help me fix this issue.
Thanks
SrikanthHi, When I try to run any reports in Oracle Answers I am getting the following error:
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred.
nQSError: 12002 Socket communication error at call=recv: (Number=10038) An operation was attempted on something that is not a socket. (HY000)
When I try to issue a 'Direct Database Request' from Answers, it is working fine and I can see the results. The error is occuring only when I select any columns from the Presentation Catalog and try to run the Adhoc report.
Please could you help me fix this issue.
Thanks
Srikanth
Maybe you are looking for
-
Hi I am planning for a SRM 5.0 installation. I haves refered Installation master guide from market place. Can any body help me on any other useful document on installation and on SRM 5.0. Thanks Vitthal prabhu
-
Highlight a row in classic report based on condition
HI all Gurus Using Apex 4.1.1 oracle 11g linux oc4j I want to highlight a row where #column_value#='Y' to grey keep others as normal report settings. I have a simple sql query SELECT PK_ID, FIRST_NAME, LAST_NAME, INITIAL_REG_DATE, MAIL_DATE,
-
Get an error message trying to access a remote PC over the internet on Mac
At work we have a remote web work place. I can get into the site but when I try to access the link to the computer list the message below is displayed. Error Message: This portion of the Remote Web Workplace requires the Microsoft Remote Desktop Acti
-
Shadow clipping in Lightroom 3: how can it be avoided?
Hi all, I'm new to the forum, and I hope some of you can aid to clarify a doubt and to solve a problem. I' m starting to catalog my scanned images, and many of them are Tiff files with embedded input profiles (in Prophoto RGB color space). Many of th
-
HR_INFOTYPE_OPERATION invoked in infotype's PAI
Hi all, Can i invoke the HR_INFOTYPE_OPERATION function to insert a record in another infotype for the same PERNR in the PAI of an infotype??