Oracle BI EE Administration Tool Not starting up

Hi All,
I have installed BI EE on windows xp and when I tried to start the Administration tool nothing happens. Can anyone assist please.
Regards
Remeez

Hi,
Probably I found a workaround to this problem: runas command. This gives a possibility to start admintool using an other user. You can find runas command syntax here http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/runas.mspx?mfr=true.
In my case, I changed Administration shortcut Target (Start -> Oracle Business Intelligence -> Administration and right click properties) to this: C:\WINDOWS\system32\runas.exe /user:RISTOS-XP\administrator C:\OracleBI\server\Bin\AdminTool.exe
I first tried this (thanks to my old gollege in Oracle Finland) as right click admintool.exe and selecting " Run as" and then "The following user:" and Administrator of my computer. I'm not sure, why I have this starting problem, maybe because I have to use Domain\UserId login. My domain login belongs to the local administrators group, but for some reason in this case it is not enough ..
- Risto
Message was edited by:
risto.soikkeli

Similar Messages

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

Oracle distributed document capture service not started

Oracle distributed document capture service not started
and timeout

I did check the Distributed Document Capture Configuration (from the Start menu) and it also indicates that I have selected "Oracle Distributed Document Capture Prompted Login". Once I click "OK" after I supplied all the paths required by server settings, it also displays the error "The username and password could not be validated". What credentials should be entered in the User ID / Password / Domain fields? You should use the username and password entered while configuring the "capture" security model. Leave the domain field blank.
I have not yet configured the IIS at this point. Is it required for the Capture application to authenticate the user I specified during the installation configuration at login? IIS will serve web ODDC interface and will be needed for authentication while accessing ODDC web pages. I beleive that it is not needed for authentication from ODC/ODDC applets. However, when something is not working as expected, I would first finish all required installation and especially post installation setup steps.
I had a look at the IIS configuration in the installation document. It doesn't clearly state which document is the default document for the website one needs to create in IIS. Do you know what it should be? You have to add new web site, say like "Capture" and add virtual directory from assumed path like: C:\Program Files\Oracle\Document Capture\WebPages
For the default document I have WebCapture.asp.
The Oracle Distributed Document Capture service does no start on my PC. Is this required for me to atleast login to the Capture application? It's required only for processing the scanned batches.
I hope that this will help.
Boris
Edited by: tombo on 2012.03.16 06:32

Oracle BAM Plan Monitor does not start

Hello all,
the Oracle BAM Plan Monitor does not start in when I execute the start scripts.
It tells my that the name of the service is invalid.
Is there any possibility to check on the configuration for that service name?
I have also checked on the event log of my Windows machine. There are a couple of strange entries coming from the Oracle BAM Engine:
EventEngine: ADC Context exception ADC Server exception in GetUserGroups(): 2.
ActiveDataCache: Caught exception while validating user NT-AUTORITÄT\SYSTEM: The RPC-Server is not available
Maybe someone has a clue how to resolve this issue.

Hi
Are you using a valid user name and passwd to access the plan monitor?
Did you set up a user called 'BAM' in your Enterprise Link? Normally this user will get created automaticaly while installing BAM. If it doesnt exist, you will have to create a user called BAM in EL with a blank password.
Please follow the post installation document, that is having more details.
Thanks
Laj

Service (Oracle Fulfillment Server VIS_oracle12) can not start

in ERP12.0.4 on windows server 2003
service (Oracle Fulfillment Server VIS_oracle12) can not start
When I start the service it stops immediate or give me this message
This is vision instance
you can see the log of start and stop all services E:\oracle\VIS\inst\apps\VIS_oracle12\logs\appl\admin\log.
AC-50001: Error - java.lang.NullPointerException occurred while executing script - null stop
Raised by oracle.apps.ad.autoconfig.ServiceControl$Service
****************************************************

Hi,
Please check the log file for more details about the error.
Was this working before? If yes, what changes have been done recently?
Any errors in the event viewer?
Regards,
Hussein

Oracle biee presentation service is not starting

hi All,
Today i installed oracle biee on my machine(having windows vista) andreplaced all corresponding files (like .rpd file & catalog and modify the nqsconfig.ini & instanceconfig.xml files). but when i tried to start the oracle bi presentation service, it was not starting(though i already started the oracle bi server and java host service).
i got the following error prompt:
"Windows could not start BI Presentation server on local computer.
For more information,review the system event log.if this is non-microsoft service,contact the service vendor, and refer to service specific error code-1"
Then i again replaced all the files to the default one(paint.rpd and paint catalog) and again tried to restart the service but this time i got the "error : 1053 Error 1053: The service did not respond to the start or control request in a timely fashion."
please help me out
Thanks

Is oc4j running? otherwise start it form Start>All Programs>Oracle Business Intelligence>Start OC4J.
Then start Presentation services (sawserver.exe in the OracleBI/web/bin directory or from Control Panel>Administrative tools> Services
Then try the wbe URL

Oracle 10 g OEM does not start after XP boot

Hallo!I am currently studying for the Oracle 10g Administration OCA
I installed Oracle 10 g on Windows XP but once I boot the OS and enter the OEM url on the browser,OEM does not load.
I am forced to go to the command prompt and manually start OEM via the command
emctl start dbconsole.
How can I configure my oracle to enable OEM to automatically start after booting the OS?
Thanks.

Hans Forbrich wrote:
user11114098 wrote:
During installation,the computer was connected to the internet via a modem that uses DHCP?So typical.
How do I resolve this issue?Microsoft Loopback Adapter. Force it to a static IP value, and enter that value in the hosts. table.
How?: Discussed more than a few times in these forums. Discussed in Microsoft forums. Discussed on internet.Also discussed in the Fine Installation Guide ... ;-)

OBIEE BI Administration Tool not able to connect to the Repository

I have my OBIEE BI server installed on a Linux server and have installed BI Client Tools on my PC which I will be using for development purposes. I have installed BI Administration Tool on my PC but I can not connect to the database.
I'm getting an error nQsError: 46029 that says I do not have 10g client installed but I did download and install this client onto my desktop. I also have the TNSnames file in the oracle_home. I can connect to the database with Oracle Reports6i and sqlplus from this same desktop but I can't seem to be able to pick up the repository for the BI Administration Tool
Any idea where I am going wrong.
Thanks,
Leo

Have you created TNS_ADMIN environment variable. Create a environment variable TNS_ADMIN which maps to location where tnsnames.ora is located.
then restart your services/machine, and test it.

The connection has failed while creating a New Repository using Oracle BI 11g Administration Tool

hi
In the BI Administration Tool when i try to create a “New Repository…” faced The connection has failed I try all of these solutions but dident work..
1-configured my “System DSN"
2-enter “TNS_ADMIN” for the “Variable Name” field and for the “Variable Value” enter the location of my OBIEE
3-copy the sqlnet and tnsnames.ora files into E:\obiee11gtmt\Oracle_BI1\network\admin and E:\obiee11gtmt\oracle_common\network\admin
4- put this in DSN with connection type OCI 10g/11g (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = IP Addr)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ))
please help me
regard

1.Place tnsnames.ora file in the following paths,
E:\obiee11gtmt\oracle_common\network\
E:\obiee11gtmt\Oracle_BI1\network\admin
2.Navigate to
E:\obiee11gtmt\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup\
Open user.sh file in a notepad
Set Tns_names paths as shown below with your tnsnames.ora file’s location,
set TNS_ADMIN=C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN
The above path is of your installed Database tnsnames.ora file
I guess you didnt do this step. This will solve your issue.
Restart all the services
If helpful, please mark the answer.
Srikanth

Oracle Enterprise Manager Serices is not Starting Up!

Hi,
I am Using Oracle 10g Database Release 2 on Windows 2003 Server Enterprise Edition. My Service Name of Em is "OracleDBConsoleSIPDB" this Services is Not Starting Up after restarting the Server. Please Adivce me, what are the thinks has to bee Checked to resolve this Problem.
Thanks
Shan

Hi,
2010-06-01 15:17:10 Thread-5704 ERROR http: 1728: Unable to initialize ssl connection with server, aborting connection attempt
2010-06-01 15:17:12 Thread-7368 ERROR ssl: nzos_Handshake failed, ret=29024
2010-06-01 15:17:12 Thread-7368 ERROR http: 1740: Unable to initialize ssl connection with server, aborting connection attempt
2010-06-01 15:17:19 Thread-2896 ERROR ssl: nzos_Handshake failed, ret=29024
2010-06-01 15:17:19 Thread-2896 ERROR http: 1740: Unable to initialize ssl connection with server, aborting connection attempt
I am getting above error message in "\\Oracle10g\d$\oracle\product\10.2.0\db_1\oracle10g.olaminfo_SIPDB\sysman\log\emdctl.trc" file
I have not Changed IP Address Or Host Name in the Server.
Please Advice...
Thanks
Shan

Oracle 11g XE listener does not start automatically during boot

Hi,
This happened to me recently I just wanted to share it with you.
For development I was running Standard Edition, at some point I decided to run also XE on the same server for another reasons. Everything was working fine, except that after restart of the server, the XE listener is not starting automatically. Debugging the startup script I found that this happens because of a bug in the code, which assumes that XE listener is running if it finds the word LISTENER within the processes list. I didn't found any obligation in the docs for running XE without any other databases on the same host.
In file /etc/init.d/oracle-xe, at line 556 the code is failing:
1     + status='oracle 2889 1 0 May13 ? 00:00:05 /oracle/ora112se/bin/tnslsnr LISTENER -inherit'
2     + '[' 'oracle 2889 1 0 May13 ? 00:00:05 /oracle/ora112se/bin/tnslsnr LISTENER -inherit' == '' ']'
As you can see I have another listener(the one for SE) running and because of the XE startup script found the keyword LISTENER it’s supposing that the XE LISTENER is already running.
To fix this simply change line 556 from:
1     status=`ps -ef | grep tns | grep oracle`
To:
1     status=`ps -ef | grep tns | grep oracle | grep xe`
Now XE listener is started automatically during boot.
Sve
Blog: http://sve.to
Twitter: sgyurov

I though the same thing, but XE LISTENER is running on localhost and port 1522. On the other hand XE have local_listener explicitly set to the very same connection descriptor. Even XE installation was second on this server.
I've could change that yes, but the startup script doesn't seemed to have this mind.
Regards,
Sve

Oracle Business Intelligence Administration Tool for Windows

I am having issues installing Oracle Business Intelligence 11g Client on Windows 7 32 bit.
This is how we set up our server:
- OBIEE 11g Server is installed and configured in RHEL 5 64bit.
(We have installed and configured Oracle Database, RCU and the OBIEE)
- Our users are working on a Windows 7 32 bit and they are the one who will be accessing the BI Server.
I have come across a bunch of information regarding our setup. I am sure that our BI Server is working properly as a matter of fact, we can now use Oracle Warehouse Builder of the BI Server.
According to Metalink Doc Id: 417656.1, OBIEE Tools are only available in Windows platforms. I beleive this is the reason why we only configured OWB in our BI server (which is in RedHat) and we cannot find a way to configure OBIEE Admin Tools. But when I read the doc id, it applies to 10g versions of BI Server, what about 11g? Is there a way to configure and use OBIEE Admin tools from the BI Server in Linux?
Also, according to the official docs:
http://docs.oracle.com/cd/E14571_01/bi.1111/e10539/c4_installing.htm#CEGEHEJF
4.6.1 Installing Oracle Business Intelligence Client Tools
"..If you installed Oracle Business Intelligence on a computer running a Linux, UNIX, or 64-bit Windows operating system, and you want to use Oracle Business Intelligence client tools, you must perform the following additional steps..."
So in my own understanding, this fits our current setup. Is this the correct solution so we can access OWB of the BI Server and use BI Admin tools from our 32 bit windows?
Also, I have read many bloggers and users having issues in Windows 7? Following the official docs i pasted here which has steps 1-3, is Windows 7 supported by Oracle Business Intelligence 11g?
Any help, confirmation (with credible basis) and further questions about this issue will be very much honored. Thanks a lot!

Hi ,
Oracle BI for CC&B has few Standard(Demo) reports packaged with this software for example CI_CSEOPN (Case by Type and Age), If we need to know the logic of this report where do we find the information as the code for this report is not user friendly which is mainly stored as functions and not understandable, Please let me know if you have any information to get the logic of this report.
Thanks
Vivek

Oracle 11g database instance will not start

I have an oracle 11g instance running on 64bit windows server 2008. The instance will not start:
SQL> startup
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 4526317568 bytes
Fixed Size 2262648 bytes
Variable Size 2566916488 bytes
Database Buffers 1946157056 bytes
Redo Buffers 10981376 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6496
Session ID: 107 Serial number: 3
After that, the oracle service for the instance stops.
It will startup with nomount and I can mount it with no issue, but as soon as I try: alter database open; it fails.
I ran a validate in rman, and no error were found.
How do I troubleshoot this?

Ok, thanks to all for pointers on finding the alert log. Found it. here's the relevant section, I believe:
ARCH: Error 19809 Creating archive log file to 'D:\ORADATA\FASTRECOVERY\....\ARCHIVELOG\2012_11_07\O1_MF_1_2456_%U_.ARC'
Errors in file C:\APP\diag\rdbms\....\trace\ukgb01_ora_3308.trc:
ORA-16038: log 2 sequence# 2456 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 2 thread 1: 'F:\ORADATA\REDO\....\REDO02.LOG'
USER (ospid: 3308): terminating the instance due to error 16038
ARC0: STARTING ARCH PROCESSES
System state dump requested by (instance=1, osid=3308), summary=[abnormal instance termination].
System State dumped to trace file C:\APP\diag\rdbms\.....\trace\xxxxx_diag_504.trc
Dumping diagnostic data in directory=[cdmp_20121107205514], requested by (instance=1, osid=3308), summary=[abnormal instance termination].
Instance terminated by USER, pid = 3308
Wed Nov 07 21:13:40 2012
Adjusting the default value of parameter parallel_max_servers
from 640 to 185 due to the value of parameter processes (200)
Starting ORACLE instance (normal)
I'm new to all this. What do I do in rman to clear this up?

Oracle Buisness Intellegence Administration Tool/Multiple users

I am trying to have two people work together on a project on 1 server, both people are remoteing into the server.
The built in administrator account can use the administration tool without any problems but any other user I create on the server level I get "Incomplete Oracle Bi Server Suite configuration" message, these new users have full administrative privledges,
Any ideas, or if this can even be done....
Thanks
Joe

Why do you need the other users to login to the server? All they should need is to use the Admin Tool which they can run from their PCs. OBIEE Server is setup to run from one account, you can't run multiple BI Servers on the same Server.

Oracle bi 11g administration tool

hi team,
i created a new repository in bi administration tool and a new system dns from administration services.
the Oracle ODBC driver connection is ok but i cannot import data.
can someone help me?
Edited by: 844202 on 14-mar-2011 8.33

it's a question.
Everywhere i solved the problem: to connect bi 11g to the db is necessary to copy the tnsnames.ora in the bi oracle home (.../network/admin)

Oracle BI EE Administration Tool Not starting up

Similar Messages

Maybe you are looking for