Oracle BPM 10.3 Cannot publish the project

I'm getting fuego.compiler.InternalException while trying to publish project (see below). Oracle BPM 10.3 installed in AIX 5.3 64-bit and bpmengine is up and running. Appreciate any ideas.
Internal error found. This should be reported to Oracle Support. Include the following information. Error: 'fuego.compiler.InternalException: Internal error found. This should be reported to Oracle Support. Include the following information. Error: 'java.lang.NullPointerException'. Node: 'class Instance'.'. Node: 'class Instance'. Caused by: Internal error found. This should be reported to Oracle Support. Include the following information. Error: 'fuego.compiler.InternalException: Internal error found. This should be reported to Oracle Support. Include the following information. Error: 'java.lang.NullPointerException'. Node: 'class Instance'.'. Node: 'class Instance'. Caused by: Internal error found. This should be reported to Oracle Support. Include the following information. Error: 'java.lang.NullPointerException'. Node: 'class Instance'. Caused by: java.lang.NullPointerException

Hi,
I was wondering if you ever found a solution to this problem? We are facing the same problem and we are searching very hard for the solution.
Regards,

Similar Messages

  • This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

    This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • Unable to prepare project for publishing the project could not be prepared for publishing because an error occurred. (file already open with write permission)

    Get this message when I try to publish my iMovie project.  "unable to prepare project for publishing the project could not be prepared for publishing because an error occurred. (file already open with write permission)"

    See the discussion here:
    https://discussions.apple.com/message/16784714#16784714

  • Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list) How do I fix this???

    Unable to prepare project for publishing
    The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
    How do I fix this???
    I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.

    I'm having the same problem. 
    When I export (and I want HD quality) I get the error message that
    Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
    How do I free up more space on my startup disk?  My hard drive has 158.61 GB free.  Do I need to free up more space?

  • I am trying to send an iMovie project to iDVD and I keep getting the following error msg.  "Unable to prepare subject for publishing:  The project could not be prepared for publishing because an error occurred. (-43)"

    I am trying to send an iMovie project to iDVD and I keep getting the following error msg.  "Unable to prepare subject for publishing:  The project could not be prepared for publishing because an error occurred. (-43)"

    Check out this thread: https://discussions.apple.com/thread/1421870
    It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

  • Unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)

    I have an imovie project that is less than 20 minutes long. i tried to publish it a couple of times and it seemed like it was finished but it never published. i tried one more time and got an error message saying "unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)". i know the project isnt too long. i am trying again but the error message only comes up after i waited 2 hours for it to finish publishing. PLEASE HELP

    oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

  • My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

    My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

    Hi there,
    Can you please share your Captivate version?(Help>About Adobe Captivate)
    Thanks,
    Nimmy Sukumaran.

  • Cannot move the Project length marker! GB 10.0.2

    Hi, I'm having problems moving the project length marker in my GarageBand 10.0.2 file.  I need to export 2 short tracks, and so I need to move the project length marker to the end of the short tracks before I export them.  But the project length marker stops at the end of the longest track even though the track is muted out...and this means I cannot move the project length marker to the proper position.  It worked fine and then it stopped working.  Please help! 

    Then mark the section of the song that you want to export with the cycle region. The end-of-song marker does not matter, if the yellow cycle region is active.  Only the cycle region will be exported.

  • Video files in Captivate 6 externalize when publishing the project. Is there any way to publish an S

    Video files in Captivate 6 externalize when publishing the project. Is there any way to publish an SWF project with the video files all in one single file?

    Rhonda, I used Captivate 6. Create a New Project. Set the project size to the size of  your MP4. In my experience, this was 640 v 480 which also happened to fit nicely within my final project.
    From the menu, select Video > Insert Video. Choose "Multi-slide Synchronized" and point to the MP4 on your local drive. Select a skin and playbar that you like from Project > Skin Editor. Then publish. In the Publish dialog, choose SWF as your output format option (not HTML5).
    This is the SWF that I added to my master project through Insert > Animation.
    Hope this helps!

  • Unable to prepare project for publishing.The project could not be prepared for publishing because an error occurred. (-50)

    Hi,
    I have not used iMovie much since buying my Mac in 2009. But now I have a camera (Canon EOS 7D) that takes HD movies, and decided to edit some footage.  iMovie is the worst product I have tried on this Mac. The previous movie I created to this one was done about a year ago using a template. This time I did not want to use any of the vast choice of 4 ugly not very customizable templates so tried creating from scratch. It crashed / beach balled (combinations of both) at least 15-20 times in the time it took me to edit together 44 minutes of footage into a 5 minute movie. Such actions as clicking to move a clip from one section of the movie to another, adding a photo via iPhoto (love the way you CANNOT add photos from anywhere else Apple - that is a lovely touch Apple -- since I use Lightroom since I learned some time ago that iPhoto is crummy if you have more photos than will fit on your hard drive, as you have to repoint the software to "find" your new photos one by one by one (with hundreds of thousands of photos I decided to ditch your software instead) so I had to go through the trouble of importing exported Lightroom .jpg files into iPhoto just for this movie). Why oh why did I think that iMovie might be a useful tool on my Mac ??? I so regret the past 24 hours ...
    After 14 hours of hair pulling, swearing and struggling, rebooting, and force-quitting beach balls -- finally I was ready to export the project, which played cleanly in the iMovie viewer.
    So, now comes the final slap in the face from Apple -- Now,  no matter what format I choose to try to export this movie, I get the above error after about 1 second.
    I am trying to export to a folder on my local hard drive. I have tried various folders, including the desktop to no avail. I have tried changing various export settings and methods, choosing iDVD, Quicktime and what I really want - the normal movie and always get this same hideous, undescriptive error after only about a second. I tried various sizes of movies, and screen formats. Absolutely no change in the amount of time to get this error.
    I have a MacBook Pro running Mac OS X 10.6.8 and 4GB of memory. I am running no other apps while I try this and have rebooted dozens of times, repaired permissions and run various "clean up" utilities. I have 79GB free disk space on my start up disk.
    When I imported the original movie files to iMovie, due to performance concerns I told it to copy the files to the disk and to reduce the video format size (my camera records HD but I did not need HD).  I saw someone say maybe the original files are on a remote disk -- but when remote disks are not connected I still get all the movies to play, so they must be locally stored. Also, when I try to use the iMovie option to Consolidate media it does not seem to do anything and returns instantly (but I can "undo" that and it also seems to do nothing ... ie takes no time at all). Yet the Consolidate Media prompt seems to show 6GB of clips are somewhere, which if copying what it claims are 6GB of files should take awhile to do it -- and it does not.
    I am trying to export to a local disk, not a remote disk. The original import was from a remote attached USB drive, and I asked it to copy the files into the library at the start (in the reduced size format). That operation took awhile so it seemed to be really doing it.
    I did not use an iMovie template to build the movie, I built it from clips using various of the "transitions" and added some music from iTunes (2 mp3 files) and from the default effects folders of iMovie.
    I cannot easily "remake" this movie in a new project, because the clips are only small sections of various parts of the many import files and some were done as "inserts" (to have 2 video clips running simultaneously with one fading into view) etc.. There are no "caution" signs on any of the clips or music or any indication of errors when I play it in preview mode, or even full screen from iMovie. It starts up in iMovie if I click on the ".project" file from the Finder.
    I have read a number of entries from advice givers regarding this error. Seems everything from "you left your car running too long" to "the refridgerator door is open" could cause this error and there is no actual way to trouble shoot what that could be except by trial and error, which I could easily spend another week doing and still never figure it out. I tried duplicating the project using the menu option, and I just get the same error.
    Is there some reason Apple released this piece of *?£$!ç%*& software into the world, causing me to waste so many hours of my creative time and energy, only to find I can do nothing but view the results inside of iMovie ???
    I want to really scream at someone at Apple right now for the most idiotic stupid unhelpful error message ever, and the worst piece of software ever. Worst because it makes you think you can produce something very cool, and even lets you see it in the iMovie preview viewer -- only to pull the rug out from under you at the end when you can't do anything but show it to friends who come to your house and look at your Mac.
    Not really a question I guess - more like a RANT and wondering what other software out there is recommended for someone who is not a pro but wants to make nice movies that WORK and will EXPORT. I expect no one knows how to solve this because all the people I see reporting this error seem to think various hundreds of things "resolved it", so in other words it is a generic error that has no way to solve it except through hours of trial and error -- Apple should be shot for releasing this and never fixing it. I see the same error code is helpfully still there in iMovie 11 as well.
    I also have no desire to upgrade to Mountain Lion, having read multiple people saying their Macs of the generation I have got really really slow after loading it, so suggest something compatible please. I am not going to waste another 12 hours trying to decipher which of the dozens of clips, edits, wipes or mp3 files could cause "error -50".
    Also, I have no time machine plugged in right now, not sure what that would have to do with anything anyhow, since I am trying to export it to a local disk, not a remote one.
    So - what NON APPLE product that is REASONABLE in price does someone recommend to replace this stinking pile of poo known as iMovie ???
    Message was edited by: JeninFrance

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • Cannot publish iMovie project paramerr: error in user parameter list

    When trying to publish imovie project, getting message:
    Unable to prepare project for publishing.
    The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)
    Can anyone help explain what to do?  My first project.
    Thanks!
    Rick

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (File already open with with write permission)

    When I click on finalize project or when I tried to share on Vimeo iMovie goes through this ten hour operation and the, somethime while I'm away from the computer, I get this error message.  UNABLE TO PREPARE PROJECT FOR PUBLISHING.  The project could not be prepared for publishing because an error occurred. (File already open with with write permission).
    This has happened to me before and I can't nail down the particulars of when this happens.  I will say I've never been able to Finalize A Project (not even sure what than means) but I have been able to publish short films to YouTube.  This current film is a little over an hour and I picked the HD Format.  Could the size have something to do with it?

    See the discussion here:
    https://discussions.apple.com/message/16784714#16784714

  • I have never had this prompt before - " Unable to prepare your project for publishing - the project could not be prepared for publishing because of an error occurred (-108)

    I have never had this problem before using iMovie
    Unable to prepare project for publishing.
    The project could not be prepared for publishing because an error occurred (-108)

    When I got the error, I realized it had nothing to do with RAM, I believe it was the camera footage I was using because changed the settings on my camcorder to something iMovie didn't like. So I have changed it back and its fine now.

  • Oracle Access Manager Configuration : Cannot find the Person Object Class

    Hi,
    I am trying to install OAM , I am getting the following error when i am configuring the Identity server for the first time.
    1) I have installed OID. I am using one OID for both config and user data.
    2) I have installed Identity server and have modified the OID schema automically during installation.
    3) I have installed web pass.
    I have gone to the url: http://trn-ps-oid.oracle.com:7777/identity/oblix
    Here i gone to Identity System Console to configure Identity server.
    Following are the config data i have given
    Configuration DN : dc=mydomain,dc=com
    Search Base : dc=mydomain,dc=com
    Host : mypc.mydomain.com
    Port Number : 389
    Root DN : cn=orcladmin
    Root Password : *******
    Directory Server Security Mode : Open
    Is the Configuration data stored in this directory also : Yes
    Person Object Class : inetorgperson
    Auto configure objectclass : yes
    Group Object Class : groupOfUniqueNames
    Auto configure objectclass : yes
    After this I have clicked on the restart server button.
    It comes back to the page asking to enter Person Object class details.
    I Get the Error : Cannot find the Person Object Class.
    I have checked the object class in OID it is there, I have verified the connection details are also correct.
    Any Ideas what might be wrong.
    Earlier during setup i had to modify the OID schema, how do i check if this has been done.
    Any Ideas

    <?xml version="1.0" encoding="utf-8"?>
    <ValNameList
    xmlns="http://www.oblix.com"
    ListName="setup.xml">
    <NameValPair
    ParamName="mainOIS"
    Value="true"></NameValPair>
    <NameValPair
    ParamName="currentStep"
    Value="LDAP_CONFIG_CHANGES"></NameValPair>
    <NameValPair
    ParamName="status"
    Value="incomplete"></NameValPair>
    <NameValPair
    ParamName="whichDB"
    Value="OID"></NameValPair>
    <NameValPair
    ParamName="dataDirCopied"
    Value="TRUE"></NameValPair>
    <NameValPair
    ParamName="machineNo"
    Value="localhost"></NameValPair>
    <NameValPair
    ParamName="portNo"
    Value="389"></NameValPair>
    <NameValPair
    ParamName="rootDN"
    Value="cn=orcladmin,cn=Users,dc=mydomain,dc=com"></NameValPair>
    <NameValPair
    ParamName="ldapRootPasswd"
    Value="**************"></NameValPair>
    <NameValPair
    ParamName="securityMode"
    Value="Open"></NameValPair>
    <NameValPair
    ParamName="oblixUserDataSame"
    Value="Yes"></NameValPair>
    <NameValPair
    ParamName="searchBase"
    Value="dc=mydomain,dc=com"></NameValPair>
    <NameValPair
    ParamName="configDN"
    Value="dc=mydomain,dc=com"></NameValPair>
    <NameValPair
    ParamName="obClassPerson"
    Value="inetorgperson"></NameValPair>
    <NameValPair
    ParamName="defaultConfigForPersonOC"
    Value="true"></NameValPair>
    <NameValPair
    ParamName="obClassGroup"
    Value="groupOfUniqueNames"></NameValPair>
    <NameValPair
    ParamName="defaultConfigForGroupOC"
    Value="true"></NameValPair>
    <NameValPair
    ParamName="obOldClassPerson"
    Value="inetorgperson"></NameValPair>
    <NameValPair
    ParamName="obOldClassGroup"
    Value="groupOfUniqueNames"></NameValPair>
    </ValNameList>

  • Topology builder encountered an issue and cannot publish the topology.

    Hi all,
    Initially I have created a topology and with central management store in the domain controller.
    DC\rtc
    Then i deleted the existing topology and created a new one in the server where i'm running Lync deployment wizard.
    memberserver\rtc.
    But, now i'm getting some error while publishing the topology.

    Hi
    Check this links to remove old sql 
    http://lyncme.co.uk/microsoft-lync-server-2013/lync-2013-topology-builder-encountered-an-issue-and-cannot-publish-this-topology/
    http://uchub.wordpress.com/2012/06/19/topology-builder-encountered-an-issue-and-cannot-publish-this-topology/
    Check this old Thread
    http://social.technet.microsoft.com/Forums/lync/en-US/ef7ebd9b-9f50-4574-ba42-3f2dc6c1d1b6/lync-2013-error-publishing-the-topology?forum=lyncdeploy
    http://social.technet.microsoft.com/Forums/lync/en-US/0365bb49-b448-479a-b46d-37d7fe8c965c/lync-2010-install-failing?forum=ocsplanningdeployment
    Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

Maybe you are looking for