Oracle bpm on solaris 1009
hi!
anyone knows if oracle bpm is supported on the release of solaris 10/09???
thanks!
regards
You are right. Since Solaris 10 kernel parameters settings in /etc/system is obsolete and some parameters are deprecated.
The steps how to configure required parameters you can find in my paper (step #1.): http://ivan.kartik.sk/oracle/install_ora10gR2_solaris.html
I bypass this issue and continue the install as I have no warning You can safely bypass this issue during installation process but you should set these parameters after installation.
Similar Messages
-
Problems to invoke a secure Web service from Oracle BPM Studio 10.3
Hi all
I'm trying to consume a web service through HTTPS protoloco Oracle BPM Studio v10.3, but I get the following error: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target.
Some help!!
ThanksWithout going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.
-
To launch Oracle BPM deployed Web Services [In BPM Enterprise]
Hi all,
I have expose my Process Instance into Web Services in Studio.
It is working well. In Studio, I start the Engine (Run -> Start Engine),
Then, I Start the Web Services (Run -> Launch deployed Web Services webapps).
It would show me my local webservice links.
http://localhost:9000/albpmServices/<ProjectName>/ws
But, I unable to launch this Web Service Webapps, when i deploy the project into Oracle BPM Enterprise with Weblogic Server.
May know what is the link for BPM Enterprise?
Regards,
ChrisMy URL is:-
http://localhost:9000/albpmServices/TestProject/ws/TestProcessServiceListener?wsdl=true
and it does not seem to open the WSDL when I start the enterprise server engine..
I have the process exposed as a web-service with two methods..
One for Process Creation and another for Notification Wait Activity...
I have also checked the box to start PAPI WS Services on my standalone server
Is there some other config that I need to make inside my standalone server to get this WSDL?
I understand that standalone works on Tomcat... -
OutOfMemoryError when running Oracle BPM Enterprise's Configuration Wizard
Hi,
I was trying to configure Oracle BPM Enterprise via Oracle BPM Admin Center. I left most of the settings to their respective default values; only adding in passwords for the Directory, Engine, etc. However an error was encountered when it is trying to deploy the '01-eng-bpmengine' EAR file. A 'OutOfMemoryError: Java heap space' was logged after running the configuration for a while. Below is the full error log:
AdmCenterConsole.log
FuegoLauncher.main()
fix classpath: C:\OraBPMwlHome\bin;C:\OraBPMwlHome\bin\lax.jar;
new classpath: C:\OraBPMwlHome\bin\lax.jar;FuegoLauncher.main() - 2
arg[0] = C:\OraBPMwlHome\bin\obpmadmcenter.properties
StreamLogOutput: No log file specified in property 'fuego.log.admcenter.file'.
Defaulting to System.err.
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] CLASSPATH=C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] PATH=C:\bea\patch_wlw1030\profiles\default\native;C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\default\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bin;C:\bea\modules\ORGAPA~1.5\bin;C:\Java\JDK16~1.0_1\jre\bin;C:\Java\JDK16~1.0_1\bin;C:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Java\jdk1.6.0_10\bin;C:\apache-ant-1.6.5\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci920_8
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] Your environment has been set.
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] CLASSPATH=C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar
[<I> 03/03/09 20:54:13]
[<I> 03/03/09 20:54:13] Initializing WebLogic Scripting Tool (WLST) ...
[<I> 03/03/09 20:54:13]
[<I> 03/03/09 20:54:19] Welcome to WebLogic Server Administration Scripting Shell
[<I> 03/03/09 20:54:19]
[<I> 03/03/09 20:54:19] Type help() for help on available commands
[<I> 03/03/09 20:54:19]
[<I> 03/03/09 20:54:19] t3://SN-06-SHENGYUEN:7001
[<I> 03/03/09 20:54:20] Connecting to t3://SN-06-SHENGYUEN:7001 with userid weblogic ...
[<I> 03/03/09 20:54:22] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'oft'.
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] Warning: An insecure protocol was used to connect to the
[<I> 03/03/09 20:54:22] server. To ensure on-the-wire security, the SSL port or
[<I> 03/03/09 20:54:22] Admin port should be used instead.
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] Location changed to edit tree. This is a writable tree with
[<I> 03/03/09 20:54:22] DomainMBean as the root. To make changes you will need to start
[<I> 03/03/09 20:54:22] an edit session via startEdit().
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] For more help, use help(edit)
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] Starting an edit session ...
[<I> 03/03/09 20:54:22] Started edit session, please be sure to save and activate your
[<I> 03/03/09 20:54:22] changes once you are done.
[<I> 03/03/09 20:54:22] creating mbean of type JMSServer ...
[<I> 03/03/09 20:54:22] creating mbean of type JMSSystemResource ...
[<I> 03/03/09 20:54:22] creating mbean of type SubDeployment ...
[<I> 03/03/09 20:54:22] creating mbean of type Queue ...
[<I> 03/03/09 20:54:22] creating mbean of type Topic ...
[<I> 03/03/09 20:54:22] creating mbean of type ConnectionFactory ...
[<I> 03/03/09 20:54:22] creating mbean of type ConnectionFactory ...
[<I> 03/03/09 20:54:22] creating mbean of type JDBCSystemResource ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type JDBCSystemResource ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSServer
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSSystemResource
[<I> 03/03/09 20:54:22] setting attributes for mbean type SubDeployment
[<I> 03/03/09 20:54:22] setting attributes for mbean type Queue
[<I> 03/03/09 20:54:22] setting attributes for mbean type Topic
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSConnectionFactory
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSConnectionFactory
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCSystemResource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCConnectionPoolParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDriverParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCXAParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSourceParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCConnectionPoolParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDriverParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSourceParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCSystemResource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] Saving all your changes ...
[<I> 03/03/09 20:54:22] Saved all your changes successfully.
[<I> 03/03/09 20:54:22] Your edit session is not stopped, you can continue your edits.
[<I> 03/03/09 20:54:22] Activating all your changes, this may take a while ...
[<I> 03/03/09 20:54:22] The edit lock associated with this edit session is released
[<I> 03/03/09 20:54:22] once the activation is completed.
[<I> 03/03/09 20:54:23] Activation completed
[<I> 03/03/09 20:54:23] Creating a user ...
[<I> 03/03/09 20:54:23]
[<I> 03/03/09 20:54:23] User already exist
[<I> 03/03/09 20:54:23] Deploying application from C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets AdminServer (upload=true) ...
[<I> 03/03/09 20:54:23] <Mar 3, 2009 8:54:23 PM SGT> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear], to AdminServer .>
[<I> 03/03/09 20:54:27] .Completed the deployment of Application with status completed
[<I> 03/03/09 20:54:27] Current Status of your Deployment:
[<I> 03/03/09 20:54:27] Deployment command type: deploy
[<I> 03/03/09 20:54:27] Deployment State : completed
[<I> 03/03/09 20:54:27] Deployment Message : no message
[<I> 03/03/09 20:54:27] Deploying application from C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear to targets AdminServer (upload=true) ...
[<I> 03/03/09 20:54:27] <Mar 3, 2009 8:54:27 PM SGT> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine [archive: C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear], to AdminServer .>
[<I> 03/03/09 20:54:43] Failed to deploy the application with status failed
[<I> 03/03/09 20:54:43] Current Status of your Deployment:
[<I> 03/03/09 20:54:43] Deployment command type: deploy
[<I> 03/03/09 20:54:43] Deployment State : failed
[<I> 03/03/09 20:54:43] Deployment Message : java.lang.OutOfMemoryError: Java heap space
[<I> 03/03/09 20:54:43] weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed.
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185)
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536)
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429)
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[<I> 03/03/09 20:54:43] No stack trace available.
[<I> 03/03/09 20:54:43] This Exception occurred at Tue Mar 03 20:54:43 SGT 2009.
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[<I> 03/03/09 20:54:43] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[<I> 03/03/09 20:54:43] at java.lang.reflect.Method.invoke(Method.java:597)
[<I> 03/03/09 20:54:43] at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
[<I> 03/03/09 20:54:43] at org.python.core.PyMethod.__call__(PyMethod.java:96)
[<I> 03/03/09 20:54:43] at org.python.core.PyObject.__call__(PyObject.java:248)
[<I> 03/03/09 20:54:43] at org.python.core.PyObject.invoke(PyObject.java:2016)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx17.deploy$8(<iostream>:223)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx17.call_function(<iostream>)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:404)
[<I> 03/03/09 20:54:43] at org.python.core.PyFunction.__call__(PyFunction.java:184)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py:623)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.call_function(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:256)
[<I> 03/03/09 20:54:43] at org.python.core.PyFunction.__call__(PyFunction.java:169)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.f$0(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py:738)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.call_function(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[<I> 03/03/09 20:54:43] at org.python.core.PyCode.call(PyCode.java:14)
[<I> 03/03/09 20:54:43] at org.python.core.Py.runCode(Py.java:1135)
[<I> 03/03/09 20:54:43] at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
[<I> 03/03/09 20:54:43]
[<I> 03/03/09 20:54:43] Exiting WebLogic Scripting Tool.
[<I> 03/03/09 20:54:43]
[<I> 03/03/09 20:54:43]
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.WLST.main(WLST.java:129)
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[<I> 03/03/09 20:54:43] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[<I> 03/03/09 20:54:43] at java.lang.reflect.Method.invoke(Method.java:597)
[<I> 03/03/09 20:54:43] at weblogic.WLST.main(WLST.java:29)
[<I> 03/03/09 20:54:43] <Mar 3, 2009 8:54:43 PM SGT> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
Is there any way that I can increase the heap size of the Configuration Wizard? If not, is there any solution to this problem?Hi,
It seems to be a Weblogic OOM (OutOfMemory).
Why don't you try increasing the weblogic memory (you have to modify your domain scripts)
I guess that after increasing your WLS domain memory settings you will be able to configure it using the config wizard.
Hope this helps,
Ariel -
SAP ECC6.0 SR3 on Oracl 10 g solaris 10 hangs during installation!!!
Hi,
I am installting SAP ECC 6.0 SR3 with DB oracle 10g OS solaris 10 jdk version java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) Client VM (build 1.4.2_16-b05, mixed mode)
H/W : T6320 Blade server
Memory : 16GB
during installation at Import ABAP phase while importing last package SAPSSEXC it hung on me there were no error logs as such nor the FS was full...
it resumed after couple of hrs..
but hung again at IMport Java Dump phase
and again no error logs...
so, my concern here is that is there any bug in SR3 or i am not able to find the error logs
the logs i check are:
import_monitor.java.log:
tail -100f import_monitor.java.log
java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_16-b05, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 27, failed 0, total 28.
Import Monitor jobs: running 1, waiting 0, completed 27, failed 0, total 28.
Loading of 'SAPVIEW' import package: OK
Import Monitor jobs: running 0, waiting 0, completed 28, failed 0, total 28.
jload.java.log>>while import java dump phase:
tail -100f jload.java.log
INFO: trying to create table CAF_RT_NUMRNG
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_NUMRNG created
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_NUMRNG loaded (0 rows)
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_PERM_REL
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_PERM_REL created
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_PERM_REL loaded (0 rows)
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_PK_GEN
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_PK_GEN created
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_PK_GEN loaded (0 rows)
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SRVMODULE
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SRVMODULE created
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SRVMODULE loaded (0 rows)
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCCFG
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCCFG created
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCCFG loaded (0 rows)
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCDEF
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCDEF created
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCDEF loaded (0 rows)
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCLCK
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCLCK created
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCLCK loaded (0 rows)
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SYSCFG
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SYSCFG created
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SYSCFG loaded (0 rows)
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_ATTR
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_ATTR created
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_ATTR loaded (0 rows)
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_FAILED
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_FAILED created
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_FAILED loaded (0 rows)
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_IDX
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_IDX created
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_IDX loaded (0 rows)
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_LINKS
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_LINKS created
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_LINKS loaded (0 rows)
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPCEL
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPCEL created
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPCEL loaded (0 rows)
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPCOT
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPCOT created
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPCOT loaded (0 rows)
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPELE
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPELE created
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPELE loaded (0 rows)
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPMES
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPMES created
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPMES loaded (0 rows)
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPMMP
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPMMP created
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
jload.log>>while import java dump phase :
tail -100f jload.log
12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_MEMBS loaded (0 rows)
12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_UM_RELGR_TEXTS
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: table CAF_UM_RELGR_TEXTS created
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_TEXTS loaded (0 rows)
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_UM_RELGR_WORDS
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: table CAF_UM_RELGR_WORDS created
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_WORDS loaded (0 rows)
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIG
12.09.08 12:48:21 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIG created
12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIG loaded (9195 rows)
12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIGENTRY
12.09.08 12:48:50 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIGENTRY created
12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIGENTRY loaded (20235 rows)
12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_KEYSEQUENCE
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_KEYSEQUENCE created
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: J2EE_KEYSEQUENCE loaded (1 rows)
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_PLUG_IN_SAVES
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: table SP_PLUG_IN_SAVES created
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: SP_PLUG_IN_SAVES loaded (0 rows)
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_RESULTS
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: table SP_RESULTS created
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: SP_RESULTS loaded (0 rows)
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_STORAGE
12.09.08 13:44:05 com.sap.inst.jload.Jload dbImport
INFO: table SP_STORAGE created
12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
INFO: SP_STORAGE loaded (2 rows)
12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_FGUID
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_FGUID created
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: TC_WDRR_FGUID loaded (0 rows)
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_LAYERS
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_LAYERS created
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: TC_WDRR_LAYERS loaded (2 rows)
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_MRO_FILES
12.09.08 13:44:09 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_MRO_FILES created
PLEASE HELP ASAP!!!!!!
Regards,
Sohal....Hi Ashok,
Thanks for prompt response
Yes Oracle is up....it bounced the Db once before performing Post Load activities...step
now, it resumed the installation and currently updating the DB statistics.
please chk the logs below:
tail -200f sapinst.log:
INFO 2008-09-12 14:12:05.250
Execution of the command "/oracle/RGP/102_64/bin/lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 12-SEP-2008 14:12:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=RGP.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
Start Date 11-SEP-2008 20:28:39
Uptime 0 days 17 hr. 43 min. 25 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/RGP/102_64/network/admin/listener.ora
Listener Log File /oracle/RGP/102_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP.WORLD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=FLGPPSAP01)(PORT=1527)))
Services Summary...
Service "RGP" has 1 instance(s).
Instance "RGP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2008-09-12 14:12:13.667
Execute step createOracleStatisticsSynonyms of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
INFO 2008-09-12 14:12:14.023
Account orargp already exists.
INFO 2008-09-12 14:12:14.033
Account 0 already exists.
INFO 2008-09-12 14:12:14.049
Account dba already exists.
INFO 2008-09-12 14:12:14.058
Account 104 already exists.
INFO 2008-09-12 14:12:14.078
Account 0 already exists.
INFO 2008-09-12 14:12:14.096
Account 105 already exists.
INFO 2008-09-12 14:12:15.836
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
INFO 2008-09-12 14:12:15.972
Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3 is written to the logfile brconnect.log.
INFO 2008-09-12 14:12:18.817
Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3" finished with return code 0. Output:
BR0801I BRCONNECT 7.00 (32)
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.17
BR0833I Creating public synonyms for database log owner SAPSR3...
BR0925I Public synonym SAP_SDBAH created successfully for table SAPSR3.SDBAH
BR0925I Public synonym SAP_SDBAD created successfully for table SAPSR3.SDBAD
BR0925I Public synonym SAP_MLICHECK created successfully for table SAPSR3.MLICHECK
BR0925I Public synonym SAP_SAPLIKEY created successfully for table SAPSR3.SAPLIKEY
BR0925I Public synonym SAP_DBAML created successfully for table SAPSR3.DBAML
BR0925I Public synonym SAP_DBARCL created successfully for table SAPSR3.DBARCL
BR0925I Public synonym SAP_DBAFID created successfully for table SAPSR3.DBAFID
BR0925I Public synonym SAP_DBAEXTL created successfully for table SAPSR3.DBAEXTL
BR0925I Public synonym SAP_DBAREOL created successfully for table SAPSR3.DBAREOL
BR0925I Public synonym SAP_DBABARL created successfully for table SAPSR3.DBABARL
BR0925I Public synonym SAP_DBADFL created successfully for table SAPSR3.DBADFL
BR0925I Public synonym SAP_DBAOPTL created successfully for table SAPSR3.DBAOPTL
BR0925I Public synonym SAP_DBASPAL created successfully for table SAPSR3.DBASPAL
BR0925I Public synonym SAP_DBABD created successfully for table SAPSR3.DBABD
BR0925I Public synonym SAP_DBABL created successfully for table SAPSR3.DBABL
BR0925I Public synonym SAP_DBATL created successfully for table SAPSR3.DBATL
BR0925I Public synonym SAP_DBAOBJL created successfully for table SAPSR3.DBAOBJL
BR0925I Public synonym SAP_DBAPHAL created successfully for table SAPSR3.DBAPHAL
BR0925I Public synonym SAP_DBAGRP created successfully for table SAPSR3.DBAGRP
BR0925I Public synonym SAP_DBAERR created successfully for table SAPSR3.DBAERR
BR0925I Public synonym SAP_DBATRIAL created successfully for table SAPSR3.DBATRIAL
BR0925I Public synonym SAP_SVERS created successfully for table SAPSR3.SVERS
BR0925I Public synonym SAP_TGORA created successfully for table SAPSR3.TGORA
BR0925I Public synonym SAP_IGORA created successfully for table SAPSR3.IGORA
BR0925I Public synonym SAP_TSORA created successfully for table SAPSR3.TSORA
BR0925I Public synonym SAP_TAORA created successfully for table SAPSR3.TAORA
BR0925I Public synonym SAP_IAORA created successfully for table SAPSR3.IAORA
BR0925I Public synonym SAP_DD02L created successfully for table SAPSR3.DD02L
BR0925I Public synonym SAP_DD09L created successfully for table SAPSR3.DD09L
BR0925I Public synonym SAP_DDNTT created successfully for table SAPSR3.DDNTT
BR0925I Public synonym SAP_DBCHK created successfully for table SAPSR3.DBCHK
BR0925I Public synonym SAP_DBDIFF created successfully for table SAPSR3.DBDIFF
BR0925I Public synonym SAP_DBSTATC created successfully for table SAPSR3.DBSTATC
BR0925I Public synonym SAP_DBSTATTORA created successfully for table SAPSR3.DBSTATTORA
BR0925I Public synonym SAP_DBSTATIORA created successfully for table SAPSR3.DBSTATIORA
BR0925I Public synonym SAP_DBSTATHORA created successfully for table SAPSR3.DBSTATHORA
BR0925I Public synonym SAP_DBSTAIHORA created successfully for table SAPSR3.DBSTAIHORA
BR0925I Public synonym SAP_DBCHECKORA created successfully for table SAPSR3.DBCHECKORA
BR0925I Public synonym SAP_DBMSGORA created successfully for table SAPSR3.DBMSGORA
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
BR0834I Public synonyms for database log owner SAPSR3 created successfully
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
BR0802I BRCONNECT completed successfully
INFO 2008-09-12 14:12:23.841
Execute step setOraclePasswords of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
INFO 2008-09-12 14:12:25.190
Account orargp already exists.
INFO 2008-09-12 14:12:25.194
Account dba already exists.
INFO 2008-09-12 14:12:25.198
Account orargp already exists.
INFO 2008-09-12 14:12:25.202
Account dba already exists.
INFO 2008-09-12 14:12:25.251
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
INFO 2008-09-12 14:12:25.260
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
INFO 2008-09-12 14:12:28.279
Account orargp already exists.
INFO 2008-09-12 14:12:28.290
Account 0 already exists.
INFO 2008-09-12 14:12:28.305
Account dba already exists.
INFO 2008-09-12 14:12:28.315
Account 104 already exists.
INFO 2008-09-12 14:12:28.335
Account 0 already exists.
INFO 2008-09-12 14:12:28.353
Account 105 already exists.
INFO 2008-09-12 14:12:30.123
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
INFO 2008-09-12 14:12:30.269
Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX is written to the logfile brconnect.log.
INFO 2008-09-12 14:12:31.006
Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX" finished with return code 0. Output:
BR0801I BRCONNECT 7.00 (32)
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0828I Changing password for database user SAPSR3
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0829I Password changed successfully in database for user SAPSR3
BR0830I Password inserted successfully into table OPS$RGPADM.SAPUSER for user SAPSR3
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0802I BRCONNECT completed successfully
INFO 2008-09-12 14:12:31.574
Account orargp already exists.
INFO 2008-09-12 14:12:31.578
Account dba already exists.
INFO 2008-09-12 14:12:31.583
Account orargp already exists.
INFO 2008-09-12 14:12:31.587
Account dba already exists.
INFO 2008-09-12 14:12:31.641
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
INFO 2008-09-12 14:12:31.649
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
INFO 2008-09-12 14:12:33.918
Account orargp already exists.
INFO 2008-09-12 14:12:33.928
Account 0 already exists.
INFO 2008-09-12 14:12:33.944
Account dba already exists.
INFO 2008-09-12 14:12:33.953
Account 104 already exists.
INFO 2008-09-12 14:12:33.973
Account 0 already exists.
INFO 2008-09-12 14:12:33.991 -
Error while installing Oracle 10g on Solaris 10.
Hi all,
I am trying to install Oracle 10g on Solaris 10 (x86). I did every thing that is given in the Installation manual
created user,group and directories. set all the env variables.
executing the runinstaller it throws error
error in writing to directory /tmp/OraInstall2009-04-06_07-14-09PM.please ensure that this directory is writable and has atleast 69MB of disk space.Installation Cannot continue.+
*:Error 0*
I have given recursive a+rwx permission to /tmp folder and /tmp has 3.2 GB free space. am i missing some thing??
I am very new to Solaris and Oracle;Please help me with this.
Thanks.
Regards
Akhilesh BhaleCheck also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp -
Oracle BPM Studio with JDK 1.6
Hi,
regarding to the the release notes of the Oracle BPM 10.3.1 (http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/relnotes/release_notes_OracleBPM10gR3.htm) the studio runs now with a JVM 1.6. But after I installed it seems to me that it is still 1.5 (if you look in Help/About Oracle BPM Studio/Configuration Details). Can I simply exchange the underlying JDK oder would there be any problems?
Kind regards
Matthiasyou can.
See the changing your JVM section for Studio at the following pages for instructions on what to do http://download-llnw.oracle.com/docs/cd/E13154_01/bpm/docs65/installguide/index.html
Thanks,
Mike -
Calling Oracle BPM Process Web Service from Oracle Service Bus
Hi
I am using Oracle Service Bus 10gR3.
I have developed simple BPM process through Oracle BPM studio 10.3.1.0.I then followed steps below
1. Create a Process.
2. Expose the Process as a Web Service.
3. Run the project. This starts the Process Execution Engine.
4. Create an ALSB External Resource of type Management Host.
5. Create a second ALSB External Resource for registration.
6. Register the End Point
Until this point everything is fine. Then I created one project through Oracle Service Bus console. Under that created WSDL, Proxy Service and Business Service Folders. I am using the web service created through BPM studio as teh Business Service in SB . I then created one proxy service to route the request to the Business Service.
Finally when I try to test the Proxy Service by launching test console, I get the
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380001</con:errorCode>
<con:reason>INTERNAL SERVER ERROR</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
I also tried to debug through "Oracle Workshop for WebLogic Version 10.3 " . But I am not getting enough details as to why this is failing.
Please help me . Thanks In advance.
Thanks
Nilay
Edited by: user8950019 on Feb 1, 2010 4:11 AMHi,
When im calling wsdl created when BPM exposed as webservice in SOAP-ui, i first hit the startSession
Request is:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<soapenv:Header/>
<soapenv:Body>
<exp:startSession>
<password>Employee</password>
<user>Employee</user>
</exp:startSession>
</soapenv:Body>
</soapenv:Envelope>
Response i Get is:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<ns1:startSessionResponse xmlns:ns1="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<return>3782hecq1s85h</return>
</ns1:startSessionResponse>
</soapenv:Body>
</soapenv:Envelope
but when i put this sessionId in main request:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<soapenv:Header/>
<soapenv:Body>
<exp:expenseReport>
<sessionId>3782hecq1s85h</sessionId>
<reportArg>
<!--Optional:-->
<comments>yes</comments>
<!--Optional:-->
<costCenter>jaa</costCenter>
<!--Optional:-->
<description>aa</description>
<!--Optional:-->
<isApproved>y</isApproved>
<!--Zero or more repetitions:-->
<items>
<!--Optional:-->
<elements>
<!--Optional:-->
<amount>700</amount>
<!--Optional:-->
<date>?</date>
<!--Optional:-->
<description>?</description>
<!--Optional:-->
<receiptChecked>?</receiptChecked>
</elements>
</items>
<!--Optional:-->
<reviewedBy>?</reviewedBy>
<!--Optional:-->
<submitDate>?</submitDate>
<!--Optional:-->
<submittedBy>?</submittedBy>
<!--Optional:-->
<total>?</total>
</reportArg>
</exp:expenseReport>
</soapenv:Body>
</soapenv:Envelope>
Response coming is :-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.userException</faultcode>
<faultstring>fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.</faultstring>
<detail>
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.
at fuego.lang.Invokeable.invokeImpl(Invokeable.java:244)
at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
at fuego.lang.Invokeable.invoke(Invokeable.java:160)
at fuego.soaptype.SoapListener.invokeDynamic(SoapListener.java:104)
at fuego.lang.Invokeable.invoke(Invokeable.java:160)
at fuego.fengine.FEngineWebServiceExecutor$2.execute(FEngineWebServiceExecutor.java:133)
at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
at fuego.fengine.FEngineWebServiceExecutor$1.run(FEngineWebServiceExecutor.java:65)
at fuego.component.Message.process(Message.java:576)
at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
at fuego.fengine.FEngineWebServiceExecutor$WebServiceExecutorPrincipal.processBatch(FEngineWebServiceExecutor.java:168)
at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: java.lang.RuntimeException: java.lang.NumberFormatException: For input string: "jaa"
at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:36)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
at fuego.lang.JavaObject.invoke(JavaObject.java:227)
at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
... 21 more
Caused by: java.lang.NumberFormatException: For input string: "jaa"
at java.lang.NumberFormatException.forInputString(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at java.lang.Integer.valueOf(Unknown Source)
at fuego.util.Conversion.tojava_lang_Integer(Conversion.java:934)
at fuego.xobject.runtime.ConversionUtilities.fromString(ConversionUtilities.java:56)
at fuegoblock.xml.XmlElementDeserializer.deserializeElement(XmlElementDeserializer.java:175)
at fuegoblock.xml.XmlElementDeserializer.deserialize(XmlElementDeserializer.java:81)
at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:160)
at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:119)
at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:17)
... 28 more</ns1:stackTrace>
<ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">D-113014550</ns2:hostname>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
can anyone explain why this error is coming.?
Edited by: user8937128 on May 19, 2010 6:58 AM -
I got error when I export database ORACLE 9i from solaris 9.
I want to export full database ORACLE 9i from SOLARIS 9 to import full database on ORACLE 9i on windows.
I set oracle environment and NSL_LANG with command:
bash-3.00$ export ORACLE_SID=TIS
bash-3.00$ export NLS_LANG=AMERICAN_AMERICA.TH8TISASCII
and then run command to export:
bash-3.00$ exp system/manager@TIS full=y file= /u03/dmp/TISfull.dmp log=/u03/dmp/exp_TIS.log
I got error message as:
Export: Release 9.2.0.1.0 - Production on Thu Oct 8 17:57:32 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in TH8TISASCII character set and UTF8 NCHAR character set
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions
. exporting system procedural objects and actions
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_AW", line 42
ORA-06512: at "SYS.DBMS_AW", line 105
ORA-06512: at "SYS.DBMS_AW", line 221
ORA-06512: at "SYS.DBMS_AW_EXP", line 264
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_AW_EXP.schema_info_exp
. exporting cluster definitions
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
How can I solve this problem?
Any suggestion?#### HOW to solve it.
## To check the default temporary tablespace of the database:
SQL> select property_name, property_value from database_properties;
## check DEFAULT_TEMP_TABLESPACE, if it use wrong temporary tablespace, run:
SQL> alter database default temporary tablespace temp;
## check user with temporary tablespace, run command:
SQL> select username, temporary_tablespace, account_status from dba_users;
## change temporary tablespace:
SQL> create temporary tablespace temp1 tempfile '/data/u01/app/oracle/oradata/TIS/temp_b.dbf' size 100m;
SQL> alter database default temporary tablespace temp1;
SQL> drop tablespace temp including contents and datafiles;
SQL> create temporary tablespace temp tempfile '/data/u01/app/oracle/oradata/TIS/temp01.dbf' size 100m autoextend off extent management local uniform size 1m;
SQL> alter database default temporary tablespace temp;
SQL> drop tablespace temp1 including contents and datafiles;
Thanks -
Error in Insallation of Oracle 10g in Solaris 5.9
Hi,
I am Installing oracle 10g in solaris OS.After completed the pre installation steps.I run the ./runInstaller command.But its showing error like this
bash-2.05# ./runInstaller
/export/home3/oracle10/install/.oui: syntax error at line 1: `(' unexpected
I open the Script file also ...
bash-2.05# cat runInstaller
#!/usr/bin/sh
# The environment variable $SRCHOME cannot be set during the installation
unset SRCHOME
AWK=/bin/awk
BUNDLE=db
OCR_LOC=/var/opt/oracle/ocr.loc
LOCALONLY=local_only
LOCAL=TRUE
CMDDIR=`dirname $0`
if [ "$CMDDIR" = "." ]; then
CMDDIR=`pwd`;
fi
# Replace relative path with fully qualified path.
if [ ! "`echo $CMDDIR|grep '^/'`" ]; then
CMDDIR=`pwd`/$CMDDIR;
fi
if [ x${PATH} != x ]; then
PATH=$CMDDIR/install:/usr/bin:/usr/ccs/bin:$PATH
export PATH
else
PATH=$CMDDIR/install:/usr/bin:/usr/ccs/bin
export PATH
fi
if [ x${LD_LIBRARY_PATH} != x ]; then
LD_LIBRARY_PATH=/usr/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH=/usr/lib
export LD_LIBRARY_PATH
fi
# Determine whether there is an existing CRS or not.
# Local is value of local_only in ocr.loc.
# False means there is an existing CRS installation on the system.
if [ -r $OCR_LOC ]; then
LOCAL=`$AWK -F= /$LOCALONLY/'{print $2}' $OCR_LOC`
fi
case "$BUNDLE" in
db)
# One-click: only if there is no cmd line argument and it's not on CRS node
if [ $# -gt 0 -o "$LOCAL" = "FALSE" -o \
! -r $CMDDIR/install/oneclick.properties ]; then
$CMDDIR/install/.oui $*
else
$CMDDIR/install/.oui -oneclick
fi
crs)
$CMDDIR/install/.oui $* -formCluster
$CMDDIR/install/.oui $*
esac
Please tell me the solution asap.bash-2.05# ./runInstallerDon't install as root user.
Did you install all important packages (listed in installation prerequisities)? -
How to read Extended user property in oracle BPM?
Hi,
I have tried using the XPATH expression in Data Association to read an Extended User Property defined in Oracle BPM Workspace. Actually I'm using Active Directory for authentication, and as there is limitations for modifying existing AD to accommodate custom fields required for BPM Processes, I created an Extended User Property called Department Code and mapped it for all users who should be participating in the process. Now I want to read this Department Code and display in ADF Form (Human Task Form).
I tried something like this using XPATH Expr. in Data Association for Human Task :
ids:getUserProperty(bpmn:getProcessInstanceAttribute('creator'), 'departmentCode')
But it appears that using Identity Function exposed for Xpath we can only read some pre-defined set of properties associated with internal LDAP for weblogic. So please suggest what is the approach one should follow in order to read Extended User Properties defined in Oracle BPM Workspace.
I'm using Oracle SOA 12.1.3 and JDeveloper 11.1.17 deployed on Windows 7
Regards,
Shoaib R KhanHi,
I have tried using the XPATH expression in Data Association to read an Extended User Property defined in Oracle BPM Workspace. Actually I'm using Active Directory for authentication, and as there is limitations for modifying existing AD to accommodate custom fields required for BPM Processes, I created an Extended User Property called Department Code and mapped it for all users who should be participating in the process. Now I want to read this Department Code and display in ADF Form (Human Task Form).
I tried something like this using XPATH Expr. in Data Association for Human Task :
ids:getUserProperty(bpmn:getProcessInstanceAttribute('creator'), 'departmentCode')
But it appears that using Identity Function exposed for Xpath we can only read some pre-defined set of properties associated with internal LDAP for weblogic. So please suggest what is the approach one should follow in order to read Extended User Properties defined in Oracle BPM Workspace.
I'm using Oracle SOA 12.1.3 and JDeveloper 11.1.17 deployed on Windows 7
Regards,
Shoaib R Khan -
Oracle BPM 11.1.1.5 Performance issues
Hi,
I have 2 Node Cluster of Oracle SOA 11.1.1.5 installed. Have a separate cluster for SOA/BPM, BAM, OSB, WSM. Here are the OS and Java versions
Java Vendor: HP
Java Version: 1.6.0.14
OS: HP-UX
OS Version: B.11.31
Running into an issue where Oracle BPM is performing very slow the task forms takes forever to come up and performing any actions takes too long to proceed som time it keeps timing out. I have over 100 SOA Process running plus some BPM Process but BMP Workspace application is running too slow as have customized tasks forms. But the same works a bit better in other instance which is non-clustered. Any idea what can be done on the server level to get around the performance issues. So far have modified Audit Levels and reduced soa-infra bpm log have the following settings in setDomainEnv.sh for USER_MEM_ARGS=-Xms2000m -Xmx6000m -XX:PermSize=1000m
But not help. Any idea what else to look into to get around these bpm performance issues. Here is what I have in setSOADomainEnv.sh
# 8395254: add -da:org.apache.xmlbeans... in EXTRA_JAVA_PROPERTIES
EXTRA_JAVA_PROPERTIES="${EXTRA_JAVA_PROPERTIES} -da:org.apache.xmlbeans..."
XENGINE_DIR="${SOA_ORACLE_HOME}/soa/thirdparty/edifecs/XEngine"
DEFAULT_MEM_ARGS="-Xms512m -Xmx1024m"
PORT_MEM_ARGS="-Xms768m -Xmx1536m"
if [ "${JAVA_VENDOR}" != "Oracle" ] ; then
DEFAULT_MEM_ARGS="${DEFAULT_MEM_ARGS} -XX:PermSize=128m -XX:MaxPermSize=512m"
PORT_MEM_ARGS="${PORT_MEM_ARGS} -XX:PermSize=256m -XX:MaxPermSize=512m"
fi
#========================================================
# setup LD_LIBRARY_PATH if directory is present...
#========================================================
if [ -d ${XENGINE_DIR}/bin ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${XENGINE_DIR}/bin"
export LD_LIBRARY_PATH
fi
#========================================================
# setup platform specific environment variables
#========================================================
case ${PLATFORM_TYPE} in
# AIX
AIX)
if [ -d ${XENGINE_DIR}/bin ]; then
LIBPATH="${LIBPATH}:${XENGINE_DIR}/bin"
export LIBPATH
fi
USER_MEM_ARGS=${PORT_MEM_ARGS}
export USER_MEM_ARGS
# Fix for 7828060
POST_CLASSPATH=${POST_CLASSPATH}:${SOA_ORACLE_HOME}/soa/modules/soa-ibm-addon.jar
# Fix for 7520915 and 8264518 and 8305217
EXTRA_JAVA_PROPERTIES="${EXTRA_JAVA_PROPERTIES} -Djavax.xml.datatype.DatatypeFactory=org.apache.xerces.jaxp.datatype.DatatypeFactoryImpl -Djava.endorsed.dirs=${SOA_ORACLE_HOME}/bam/modules/org.apache.xalan_2.7.1"
export EXTRA_JAVA_PROPERTIES
# HPUX
HP-UX)
if [ -d ${XENGINE_DIR}/bin ]; then
SHLIB_PATH="${SHLIB_PATH}:${XENGINE_DIR}/bin"
export SHLIB_PATH
fi
LD_LIBRARY_PATH="${XENGINE_DIR}/bin:${LD_LIBRARY_PATH}"
export LD_LIBRARY_PATH
USER_MEM_ARGS="-d64 ${PORT_MEM_ARGS}"
export USER_MEM_ARGS
;;And here is what I have in setDomainEnv.sh
XMS_SUN_64BIT="256"
export XMS_SUN_64BIT
XMS_SUN_32BIT="256"
export XMS_SUN_32BIT
XMX_SUN_64BIT="512"
export XMX_SUN_64BIT
XMX_SUN_32BIT="512"
export XMX_SUN_32BIT
XMS_JROCKIT_64BIT="256"
export XMS_JROCKIT_64BIT
XMS_JROCKIT_32BIT="256"
export XMS_JROCKIT_32BIT
XMX_JROCKIT_64BIT="512"
export XMX_JROCKIT_64BIT
XMX_JROCKIT_32BIT="512"
export XMX_JROCKIT_32BIT
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
WLS_MEM_ARGS_64BIT="-Xms256m -Xmx512m"
export WLS_MEM_ARGS_64BIT
WLS_MEM_ARGS_32BIT="-Xms256m -Xmx512m"
export WLS_MEM_ARGS_32BIT
else
WLS_MEM_ARGS_64BIT="-Xms512m -Xmx512m"
export WLS_MEM_ARGS_64BIT
WLS_MEM_ARGS_32BIT="-Xms512m -Xmx512m"
export WLS_MEM_ARGS_32BIT
fi
if [ "${JAVA_VENDOR}" = "Oracle" ] ; then
CUSTOM_MEM_ARGS_64BIT="-Xms${XMS_JROCKIT_64BIT}m -Xmx${XMX_JROCKIT_64BIT}m"
export CUSTOM_MEM_ARGS_64BIT
CUSTOM_MEM_ARGS_32BIT="-Xms${XMS_JROCKIT_32BIT}m -Xmx${XMX_JROCKIT_32BIT}m"
export CUSTOM_MEM_ARGS_32BIT
else
CUSTOM_MEM_ARGS_64BIT="-Xms${XMS_SUN_64BIT}m -Xmx${XMX_SUN_64BIT}m"
export CUSTOM_MEM_ARGS_64BIT
CUSTOM_MEM_ARGS_32BIT="-Xms${XMS_SUN_32BIT}m -Xmx${XMX_SUN_32BIT}m"
export CUSTOM_MEM_ARGS_32BIT
fi
MEM_ARGS_64BIT="${CUSTOM_MEM_ARGS_64BIT}"
export MEM_ARGS_64BIT
MEM_ARGS_32BIT="${CUSTOM_MEM_ARGS_32BIT}"
export MEM_ARGS_32BIT
if [ "${JAVA_USE_64BIT}" = "true" ] ; then
MEM_ARGS="${MEM_ARGS_64BIT}"
export MEM_ARGS
else
MEM_ARGS="${MEM_ARGS_32BIT}"
export MEM_ARGS
fi
MEM_PERM_SIZE_64BIT="-XX:PermSize=128m"
export MEM_PERM_SIZE_64BIT
MEM_PERM_SIZE_32BIT="-XX:PermSize=128m"
export MEM_PERM_SIZE_32BIT
if [ "${JAVA_USE_64BIT}" = "true" ] ; then
MEM_PERM_SIZE="${MEM_PERM_SIZE_64BIT}"
export MEM_PERM_SIZE
else
MEM_PERM_SIZE="${MEM_PERM_SIZE_32BIT}"
export MEM_PERM_SIZE
fi
MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=512m"
export MEM_MAX_PERM_SIZE_64BIT
MEM_MAX_PERM_SIZE_32BIT="-XX:MaxPermSize=512m"
export MEM_MAX_PERM_SIZE_32BIT
if [ "${JAVA_USE_64BIT}" = "true" ] ; then
MEM_MAX_PERM_SIZE="${MEM_MAX_PERM_SIZE_64BIT}"
export MEM_MAX_PERM_SIZE
else
MEM_MAX_PERM_SIZE="${MEM_MAX_PERM_SIZE_32BIT}"
export MEM_MAX_PERM_SIZE
fi
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
if [ "${PRODUCTION_MODE}" = "" ] ; then
MEM_DEV_ARGS="-XX:CompileThreshold=8000 ${MEM_PERM_SIZE} "
export MEM_DEV_ARGS
fi
fi
# Had to have a separate test here BECAUSE of immediate variable expansion on windows
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_DEV_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
if [ "${JAVA_VENDOR}" = "HP" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
if [ "${JAVA_VENDOR}" = "Apple" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
if [ "${debugFlag}" = "true" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -da:org.apache.xmlbeans... "
export JAVA_OPTIONS
fi
export USER_MEM_ARGS="-Xms4g -Xmx6g -XX:PermSize=2g -XX:+UseParallelGC -XX:+UseParallelOldGC"Here is the output of the top command
Load averages: 0.08, 0.06, 0.06
315 processes: 205 sleeping, 110 running
Cpu states:
CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS
0 0.06 4.0% 0.2% 1.0% 94.8% 0.0% 0.0% 0.0% 0.0%
2 0.07 3.6% 5.0% 0.2% 91.2% 0.0% 0.0% 0.0% 0.0%
4 0.07 2.0% 0.2% 0.0% 97.8% 0.0% 0.0% 0.0% 0.0%
6 0.07 2.4% 0.2% 0.8% 96.6% 0.0% 0.0% 0.0% 0.0%
8 0.09 1.2% 0.2% 10.9% 87.7% 0.0% 0.0% 0.0% 0.0%
10 0.12 3.0% 0.0% 11.1% 85.9% 0.0% 0.0% 0.0% 0.0%
12 0.08 3.0% 0.2% 6.6% 90.3% 0.0% 0.0% 0.0% 0.0%
14 0.09 4.2% 1.2% 0.8% 93.8% 0.0% 0.0% 0.0% 0.0%
avg 0.08 3.0% 1.0% 3.8% 92.2% 0.0% 0.0% 0.0% 0.0%
System Page Size: 4Kbytes
Memory: 38663044K (38379156K) real, 149420048K (148978096K) virtual, 26349848K f
ree Page# 1/63
CPU TTY PID USERNAME PRI NI SIZE RES STATE TIME %WCPU %CPU COMMAND
4 ? 3926 root 152 20 213M 70040K run 694:47 10.05 10.04 cimprovagt
4 ? 6855 user1 152 20 7704M 1125M run 4:36 9.31 9.29 java
0 ? 6126 user2 152 20 2790M 1863M run 22:57 4.16 4.15 javaHere is the Memory on the box
Memory: 98132 MB (95.83 GB)
ThanksAfter changing JVM settigns for soa cluster it's a bit better but still slow so wondering what other tweaks can be done on the JVM side. Here is what is for the SOA Cluster
USER_MEM_ARGS="-server -Xms12928m -Xmx12928m -XX:PermSize=3072m -Xmn3232m -XX:+SXTElimination -XX:+UseParallelGC -XX:+UseParNewGC -XX:+ExplicitGCInvokesConcurrent -XX:-TraceClassLoading -XX:-TraceClassUnloading"
We are running multiple instances on the same boxes and the total RAM on the machine is 95 GB on each box which is being shared across 4 cluster environments. For now other 3 cluster environments have the SOA Cluster JVM setting as
USER_MEM_ARGS="-server -Xms4096m -Xmx4096m -XX:PermSize=1024m -Xmn1152m -XX:+SXTElimination -XX:+UseParallelGC -XX:+UseParNewGC -XX:+ExplicitGCInvokesConcurrent -XX:-TraceClassLoading -XX:-TraceClassUnloading"
Any help on what else I can tweak or set in JVM to get a better performance.
Thanks -
Primavera EPPM 8.2 and Oracle BPM 11.1.1.6
Hello Forum,
I'm a specialist in Oracle BPM and was instructed with a task to integrate EPPM 8.2 with Oracle BPM solution. So I am new to all this Primavera stuff but glad to learn it.
According to EPPM 8.2 it can only be integrated with Oracle BPM 11.1.1.5 release (what I did). Could you tell me if it is certified to integrate with the latest release of Oracle BPM and WebCenter Content which is currently 11.1.1.6 ?It is certified to work only with BPM 11.1.1.5 and not the latest version :(. You can track http://docs.oracle.com/cd/E25030_01/index.htm to see if the support has been added.
Sachin Gupta -
Hi
I know that we can install Oracle 8i on Solaris 8.
Can we install oracle 8i on Solaris 10 ?
What is the last solaris version that supports installation of Oracle 8i?
ThanxMetalink Certification Matrix shows that Solaris 9 was the last one.
HTH
RK -
BPM Process Creation: Can't find bundle oracle.bpm.fusion.soa.msg
Hi
I cant create a BPM process in my Jdeveloper .4, .5 or .6. I have updated all them with the BPM extension. While creating a BPM application, the technologies being included in the application, i.e. BPM and SOA are correct. However, on the next page, I can't see any templates. Even if I click finish at that page, only a simple SOA project (not a BPM one, since the BPM Project Navigator tab is absent) gets created with an error log:
SEVERE: Exception while updating observer[1]: oracle.tip.tools.ide.fabric.addin.SCAAddin@b8a11a
java.util.MissingResourceException: Can't find bundle for base name oracle.bpm.fusion.soa.msg.BPMNStringResourceBundle, locale
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1427)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1250)
at java.util.ResourceBundle.getBundle(ResourceBundle.java:952)
at oracle.javatools.util.BundleLoader.getBundleImpl(BundleLoader.java:130)
at oracle.javatools.util.BundleLoader.getBundle(BundleLoader.java:167)
at oracle.javatools.util.BundleLoader.getBundle(BundleLoader.java:152)
at oracle.tip.tools.ide.fabric.config.SCAConfig.getChildElementValue(SCAConfig.java:580)
at oracle.tip.tools.ide.fabric.config.SCAConfig.loadComponentType(SCAConfig.java:451)
at oracle.tip.tools.ide.fabric.config.SCAConfig.loadComponentTypes(SCAConfig.java:395)
at oracle.tip.tools.ide.fabric.config.SCAConfig.<init>(SCAConfig.java:370)
at oracle.tip.tools.ide.fabric.config.SCAConfig.getSCAConfig(SCAConfig.java:148)
at oracle.tip.tools.ide.fabric.config.SCAConfig.getSCAConfig(SCAConfig.java:133)
at oracle.tip.tools.ide.fabric.addin.ScaProjectNodeListener.<init>(ScaProjectNodeListener.java:71)
at oracle.tip.tools.ide.fabric.addin.SCAAddin.handleObjectOpenedEvent(SCAAddin.java:462)
at oracle.tip.tools.ide.fabric.addin.SCAAddin.update(SCAAddin.java:348)
at oracle.ide.model.IdeSubject.notifyObservers(IdeSubject.java:98)
at oracle.ide.model.Node.notifyObservers(Node.java:786)
at oracle.ide.model.UpdateMessage.fireObjectOpened(UpdateMessage.java:673)
at oracle.ide.model.Node$14$1.run(Node.java:2878)
at oracle.ide.model.NodeListener.invokeLaterIfNeeded(NodeListener.java:158)
at oracle.ide.model.Node$14.nodeOpened(Node.java:2869)
at oracle.ide.model.Node$5.run(Node.java:2531)
at oracle.ide.model.Node.fireNodeEvent(Node.java:2467)
at oracle.ide.model.Node.fireNodeOpened(Node.java:2529)
at oracle.ide.model.Node.open(Node.java:988)
at oracle.ide.model.Node.open(Node.java:922)
at oracle.ideri.navigator.DefaultNavigatorWindow.openDataNodes(DefaultNavigatorWindow.java:1237)
at oracle.ideri.navigator.DefaultNavigatorWindow.restoreExpansionState(DefaultNavigatorWindow.java:1215)
at oracle.ideri.navigator.DefaultNavigatorWindow.loadLayout(DefaultNavigatorWindow.java:619)
at oracle.ide.navigator.ProjectNavigatorWindow.loadLayout(ProjectNavigatorWindow.java:391)
at oracle.ide.docking.DrawerWindow.loadLayout(DrawerWindow.java:640)
at oracle.ide.navigator.ApplicationNavigatorWindow.loadLayout(ApplicationNavigatorWindow.java:1174)
at oracle.ideimpl.docking.DockStationImpl.loadViewData(DockStationImpl.java:1353)
at oracle.ideimpl.docking.TitledPanel.loadClientLayout(TitledPanel.java:1376)
at oracle.ideimpl.docking.TitledPanel.loadLayout(TitledPanel.java:1714)
at oracle.ideimpl.docking.TitledPanelXMLDockLayoutPersistence.loadComponent(TitledPanelXMLDockLayoutPersistence.java:29)
at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
at oracle.ideimpl.docking.SidePort.loadLayout(SidePort.java:255)
at oracle.ideimpl.docking.DockStationImpl.loadValidLayout(DockStationImpl.java:1965)
at oracle.ideimpl.docking.DockStationImpl.loadExistingPositions(DockStationImpl.java:1654)
at oracle.ideimpl.docking.DockStationImpl.onStartup(DockStationImpl.java:1629)
at oracle.ideimpl.docking.DockStationImpl.loadLayout(DockStationImpl.java:1473)
at oracle.ideimpl.docking.DockStationListener.init(DockStationListener.java:36)
at oracle.ide.layout.Layouts.activate(Layouts.java:814)
at oracle.ide.layout.Layouts.activateLayout(Layouts.java:192)
at oracle.ideimpl.MainWindowImpl$6.runImpl(MainWindowImpl.java:728)
at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Would really appreciate some quick help.
Thanks,
PulkitGuessing you might hear from Oracle that the URL reference in your thread below is pointed to an the old version and that the classes are no longer supported.
As you know, this is not the case - the URL you have in your thread for the API is the latest for 11.1.1.6. Both classes you mention should be supported (at least according to the Javadoc) and in a recent search I was not able to find them either.
Might be worth a call to Oracle Support to either straighten out the Javadoc or get you a patch.
Dan
Maybe you are looking for
-
Is there a way to convert DVD-VR movie into DVD-video to import in IMovie?
My husband shot 6 hours of video on a Sony DCR-DVD106E Handycam abroad, and had that burned on a dvd. Unfortunely he shot this material with the camera in DVD-VR mode,and and now it's impossible to import and edit in IMovie. ☹ I discovered already th
-
I cannot send or receive messages on iMessages since password reset.
I forgot the password to login to my Mac and had to reset it using my Apple-ID. Prompts then came up asking me to put in my icloud/facetime etc passwords. I had to figure out my old password in order to login to the Apple keychain or something to be
-
My safari won't let me shut down my computer and it also won't quit out of safari!
Im trying to exit out of safari but it keeps on making a noise and won't let me close out of it or minimize. Also when I try to shut my computer down it says to quit out of safari before but it won't let me. It lets me quit out of everything else but
-
Apache Tomcat/4.0.6 - HTTP Status 500 Help!!!
When I requst a simple jsp page, I got error: (I have set my env as: ----CLASSPATH as C:\Program Files\Apache Tomcat 4.0\common\lib\servlet.jar;C:\j2sdk1.4.2_01\lib\tools.jar;C:\j2sdk1.4.2_01\lib\dt.jar ----JAVA_HOME as C:\j2sdk1.4.2_01 ----path as C
-
When we manually create a Stock Transport Order in the Interactive TLB, we receive an error, " Invalid order". When receiving the error, once we back out and go back in, the correct STO then appears. Can Someone let me know why the system behaving