Oracle Client 10.2.0.1 and Server 10.2.0.3

Hi,
is it possible to connect with Client 10.2.0.1 to Oracle Database which runs under 10.2.0.3?
I just need a client to create a tnsnames.ora on the client-pcs.
Greets
Alex

is it possible to connect with Client 10.2.0.1 to
Oracle Database which runs under 10.2.0.3?No problems at all. See Metalink Note:207303.1 - Client / Server / Interoperability Support Between Different Oracle Versions
BTW, 10.2.0.1 and 10.2.0.3 are different patches, but the same version....

Similar Messages

Is there Ready Made Configuration Packs available for Lync Client ( Client on end user computer ) and Server

Hi,
is there Ready Made Configuration Packs available for Lync Client ( Client on end user computer ) and Server ... to check the configuration, services,compliance, functionality of all the features etc at end user level
and server configuration packs
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

No, there is not something available for Lync. What's available can be found here (and it's all not recent):
https://www.microsoft.com/en-us/search/DownloadsDrillInResults.aspx?q=SCCM+%22configuration+pack%22&cateorder=2_5_1&site=
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Oracle client 32/64 bit on Crystal Server 2013 and Windows Server 2012

I'm getting the error "Unknown Database Connector Error" when I run report on the server and it works OK on crystal designer 2013.
Been reading this thread 32&64 bit Oracle Client but not much help there.
Here are the details
System
Windows Server 2012
Crystal Server 2013 SP5
Crystal Server has been installed and appears to work fine. I was able to develop a brand new report locally and saved it to the server and it displays ok. Of course when I click on refresh on the report, it will error out due to database connection it looks like.
We have installed both oracle client drivers 64 and 32. 64 was installed first and then 32.The path has been modified so that the 32 shows up first.
I even ensure oracle_home and oracle_home32 are specified and restarted the server. I still get the same error.
The tns entries are also located in both installs of oracle client...
What might be the issue?

Oracle Database Client 12.1.0.2.0 (32-bit and 64-bit installed)
Installation Type: Custom
COMPONENTS INSTALLED:
SQLPLUS
ORACLE NET
We are currently not using an ODBC connection.
We installed Crystal 2013 Server SP05. This is the sole package installed (believe it's the latest version) without any extra patch package installed (believe no patch needed as it's the latest version).

Oracle Client 64-bit and Oracle Client 32-bit on the same server

Hi,
I have a Windows 2008 server 64-bit with Oracle Client 64-bit and Oracle Client 32-bit installed on different directories (D:\Oracle and D:\Oracle32)
Is it possible to define for certain applications to use the TNSNAMES entry from the 64-bit Oracle Client
and for other applications to use the TNSNAMES entry from the 32-bit Oracle Client
Once I installed the Oracle Client 32-bit (Oracle Client 64-bit version was already installed) and restarted the server I performed a TNSPING and it defaulted to the Oracle Client 32-bit installation path
Thanks,
Barry

Hello,
When you install a new client on a server, it will update the PATH variable, and add the ORACLE_HOME\bin path to it, at the first place. That explains why the tnsping use the last installed ORACLE_HOME.
What you can do if you want only to change the default path to the tnsnames is to set the environment variable TNS_ADMIN to the path where the tnsnames you want to use is located. You can modify this variable in your application if you want to use another tnsnames.
If you want switch from 32 bits to 64 bits client, then you have to modify the PATH variable.
Hope this will help.
Best regards,
Sylvie

Can i install Oracle client with diferent version than database server?

Hi,
I need to install in two PC client 11g R2 version client. One of my database version is 10g R2 and the other is 9i. Can i install in my PC client a Oracle client version different to my database servers (or i need to install exactly de same version)? I need buy any aditional license?
Many thanks in advance.

In general you can install an Oracle client version that is different from Oracle database server. However you should take care of client/server support status on My Oracle Support site: see Client / Server / Interoperability Support Matrix For Different Oracle Versions [ID 207303.1].

Uninstalling Oracle Client 8.0.5.0 And Getting Error - Please Help

Hi Gang
I have installed the Oracle 8.0.5.0 client on a server and now I can't get it off. When I run the install program and select everything to uninstall, it starts to process and then gives me the following error.
It was not possible to find a value for the variable 'rdbms80' in '$ORACLE'. It is therefore not possible to remove Required Support Files. Please restore the binding for 'rdbms80' in '$ORACLE' in order to remove Required Support Files.
Could you PLEASE help with this?
Thanks
Andy

I guess results are unpredictable when using such an old client, that was not written to handle pipelined functions. Presumably in its communication with the server it is sending the wrong information because it doesn't know what datatype it is dealing with.
You will also hit problems dealing with object and collection types in general, timestamps, intervals and WITH clauses. I've had no problems using the 10g client against a 9.2 database. Not only do you get a better version of SQL*Plus, but it solved some similar problems within PL/SQL Developer.

Oracle Client in Citrix Server

It is fail to install Oracle8i Client Release 3 (8.1.7) in our Citrix Metaframe server via Add/Remove programs. After I select the location of Client 8i installation path and press Next button, nothing was appeared. The oracle client installation never start.
But I can install the oracle client in any desktop machine using this CDROM and I can use Add/Remove program in Citrix server to install Visual Basic program and other program.
I don't know why nothing happen when I execute the Oracle client installation.
Please help and advise.
Patrick Lee

Bug in 817
If your running from the CD, then you need to copy all the files to your network somewhere.
Once on the network/hard disk, search the contents of the CD for a file named symcjit.dll and rename to symcjit.old. There will be more than 1 of these files, and you must rename all of them.
Then run setup again.

App/Batch server - oracle client version

Hi,
The Oracle client installed on PSOVM App/Batch server is owned by root ( sigh ), the tnsnames.ora file in used is under /etc/tnsnames.ora (re sigh ), but I got a question. The Oracle client installed is 10.2.0.1 where the template of database server is using 11.1.0.7, I thought Peoplesoft has always recommended (do not say supported ?) same version on both sides. Does that mean it is supported from now, or still not supported but no bug are reported ? The goal of having Peoplesoft templates is mainly to have a full Peoplesoft certified environment, right ?
Nicolas.

I won't go into the reasons why there is a different version of the client and server Oracle DB versions. Take our word for the fact that there wasn't an easily amenable pre-existing DB client package for 11.1.0.7 that could be included in a clean and time-effective manner.
Given that this is just a first cut at these templates the templates are not quite as rigorous as what is expected of a production grade environment. The focus was on getting something that successfully demonstrates the basics of a PeopleSoft HCM 9.1 Application.
I am surprised to learn that the Oracle Client is owned by root. I'll make sure this gets addressed in the next version of the templates.

Do client's and server's JVM need to be from same vendor?

Hi,
1) Is a reference to object in the server valid in client if a different vendord JVM is used?
Each JVM vendor implements references in a different way.
Say client's JVM is Microsoft and Server's is SUN
in such a situation will a remote reference be interpreted correctly in client's JVM?
2) What are contents of a object-reference?
I know that it depends on implementation.
How does sun do?
are both declared datatypes and runtime type of references stored?
If so where?
An object has both data and methods(class instance)
Therefore will it have 1 ptr to where data is stored
and one pointer to class instance for access to methods
Then where are decalared and defined reference types stored

No they do not. See, the JVM is nothing more than a specification, like CORBA. What is an implementation of CORBA? an orb, right? You can be sure that every ORB out there implements the full spec of corba......they do so differently, but they MUST do so. The same with JVMs. They're impl style can be different, but they MUST fulfill all the specs of what is called the JVM.

Can I install Oracle client on Mac os X version 10.4.6?

Hello,
My os version:
ProductName: Mac OS X
ProductVersion: 10.4.6
BuildVersion: 8I127
The processor information is "Dual 800 MHz PowerPC G4 2MB L3 cache per processor"
Memory 1 GB SDRAM
120 gig hard drive
I would like to install the Oracle client software so i can run sql*Plus. I'm looking at the quick install guide and it says that "Only Mac OS X Server is supported." and it also says "The operating system version must be Apple Mac OS X Server 10.3.6"
Why would Oracle only create an Oracle client that runs on a mac server? Is this information correct? or can I go ahead and install the client on my machine?
Thank you,
David

No luck for me. :( Even gave total access to the directory and files. But the location of the lib file is not any directory on my machine.
Thanks for any help you can provide.
Eric
<pre>
/usr/ora_instant_client $ll
total 86100
0 drwxr-xr-x 12 root wheel 408B Jul 7 22:22:46 2007 ../
0 drwxrwxrwx 14 root wheel 476B Jul 7 22:47:30 2007 ./
16 -rwxrwxrwx 1 root wheel 15K Jul 7 22:48:25 2007 sqlplus*
1368 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 ojdbc14.jar
728 -rwxrwxrwx 1 root wheel 727K Jul 7 22:48:25 2007 libsqlplus.dylib*
92 -rwxrwxrwx 1 root wheel 90K Jul 7 22:48:25 2007 libocijdbc10.dylib*
64612 -rwxrwxrwx 1 root wheel 63M Jul 7 22:48:25 2007 libociei.dylib*
1800 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 libocci.dylib.10.1
1484 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 libnnz10.dylib
14544 -rwxrwxrwx 1 root wheel 14M Jul 7 22:48:25 2007 libclntsh.dylib.10.1*
0 drwxrwxrwx 3 root wheel 102B Jul 7 22:48:25 2007 instantclient10_1/
4 -rw-rw-rw- 1 root wheel 1K Jul 7 22:48:25 2007 glogin.sql
1428 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 classes12.jar
24 -rw-rw-rw- 1 root wheel 20K Jul 7 22:48:25 2007 README_IC.htm
/usr/ora_instant_client $sqlplus
dyld: Library not loaded: /b/729/sqlplus/lib/libsqlplus.dylib
Referenced from: /usr/ora_instant_client/sqlplus
Reason: image not found
Trace/BPT trap
/usr/ora_instant_client $export
DYLD_LIBRARY_PATH=/usr/ora_instant_client/instantclient10_1
HOME=/Users/xxx
LOGNAME=xxx
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/ora_instant_client
PS1='$PWD $'
PWD=/usr/ora_instant_client
SHELL=/bin/ksh
TERM=ansi
TERM_PROGRAM=iTerm.app
TNS_ADMIN=/usr/ora_instant_client/instantclient10_1
</pre>

Oracle Client 11g on Windows 2008 64 bit ASP Connection Problems

Hi,
I'm trying to set up my old ASP applications on a new web server. I've moved from a windows 2003 server to 2008 64 bit.
I've installed the Oracle Client 11g 64 bit drives and if I create a new ODBC connection tat works fine. But IIS will not connect.
Connection string i've been using is:
Provider=OraOLEDB.Oracle.1; Password=******; User ID=*****; Data Source=*****
All i get is no provider could be found.
"3706 Provider cannot be found. It may not be properly installed."
Can anyone help me out / point me in the right direction?
Thanks
Gareth Owen

Hi,
Thanks for the reply. The app pool is running in 64 bit. I've tried installing a 32 bit version of the oracle provider and shifting the app pool down to that and no joy either.
Have tried changing the permissions on the Oracle folder which gives me no joy. It's as if IIS just has no access to the Oracle provider. But I just don't know how to get this working.
Under windows 2003 things just worked when I installed the Oracle provider...
Gareth

Not able to apply patch of 10.2.0.3 on 10.2.0.1 Oracle Client

It is giving this exception
OUI-10133:Invalid stage area. There are no top level components for Windows NT, Windows 2000 available for installation inthis staging area.
The OS is Windows Server 2003 R2. I have just installed Oracle Client 10.2.0.1 and trying to apply patch of 10.2.0.3 Its urgent. Thanx in advance

I was able to install this patch on Windows 2003 R2.
When it asks for the install home it will just make one up. If you click in the box (it looks grayed out) you will see the REAL home. Highlight that and then continue. It should install fine after that.

ORA-12154 in new oracle client installation (ASP applications)

Hello,
I've got a test server with an Oracle 10.2 client that has some web services running on it. They connect using the oracle client to a database in another server. Untill this morning they were working great but then I has some trouble and I had to reinstall the Oracle client again. Now I have installed once any Web Service tries to open a connection to my oracle database I get an ORA-12154.
I've tried to run (in my test server) a simple console application that opens a connection to the same database with the same connectionstring and queries a table and it works great, so I think that there might be some problem with asp.net applications or something like that....
Does somebody know how can I solve that??
Thanks in advance!

after you reinstall Oracle client, run netca to configure your tnsnames again. Or if you have copy of old tnsnames.ora file put under new client ORACLE_HOME/network/admin

Websphere 7.0.0.9 Oracle client 11.0.0.1

We have websphere 7.0.0.9 and the application works fine with Oracle client 11.0.0.1
But when we test the application with Oracle client 11.0.0.2, it's failing.
Just I want to know whether websphere 7.0.0.9 is compatible with Oracle client 11.0.0.1 and Oracle client 11.0.0.2. In both the cases, Oracle DB server is 11.0.0.2.
Can you get this compatibility matrix of Websphere 7.0.0.9

891480 wrote:
We have websphere 7.0.0.9 and the application works fine with Oracle client 11.0.0.1
But when we test the application with Oracle client 11.0.0.2, it's failing.
Just I want to know whether websphere 7.0.0.9 is compatible with Oracle client 11.0.0.1 and Oracle client 11.0.0.2. In both the cases, Oracle DB server is 11.0.0.2.
Can you get this compatibility matrix of Websphere 7.0.0.9Sure, just ask IBM.

Oracle Client Release Version

Hi,
Oracle Client is installed on a messaging server(Solaris). I want to know which version of Oracle client has been installed. How to find this ?
Thanks

Login to Solaris machine as oracle user and start Sql*Plus.
$ sqlplus scott/tiger@orcl
SQL*Plus: Release 10.1.0.3.0 - Production on Tue Jun 20 16:50:25 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
SCOTT@orcl SQL>

Oracle Client 10.2.0.1 and Server 10.2.0.3

Similar Messages

Maybe you are looking for