Oracle Client 10i archieve is broken (file "10g_win32_client.zip")

Hello,
I have just downloaded Oracle Client 10i for Windows for three times.
And all three times I was not able to extract files from archieve.
Some files in archieve were corrupted!
Size of lots of extracted files did not match the uncompressed size recorded in zip file.
So, Something wrong with source file or something wrong with connection.
I used two times ReGet and one time GEtRight to download file.
What is going on and what should I do to get Oracle client 10i for Windows?
Dmitry Tabachnikov

Is the file exactly the same (byte for byte) all three times you downloaded it? If it is, the source file may be corrupt. If it isn't, you may be having some network trouble.
~Jer

Similar Messages

How i install oracle client with ODBC using response file method

Hi,
I have managed to create a response file using OUI. Currently, I do not know what are the methods which i can install a group of computers using this response file. Any advise
Thanks in advance.
Best regards,
Tony

Presumably, any method that allows you to remotely run code on the group of computers would allow you to do a silent install of the Oracle client and ODBC driver. I know Microsoft and various third parties sell such tools, but I'm not enough of a Windows admin to know anything about the relative benefits of the products in this category.
Justin

Installing Latest Oracle Client & ODT for Windows 7 64-bit

I have a Windows 7 64-bit. I would think that using 32-bit Java, 32-bit Oracle Client and 32-bit ODAC would work just fine on this operating system. However, I had no luck getting it to run. Here is what I did and a few reasons why I prefer to never work with Oracle products:
Installed 32-bit JDK/JRE (1.6 Update 25)
Installed 32-bit Oracle Client (11g R2) Home 1
Tested connectivity from SQL Developer successfully
Installed 32-bit ODT (11g R3) to Home 1 (installer noted upgrades and new installs)
Failed connectivity from all things windows (ODBC, ADO, ADO.Net)
Uninstalled 32-bit ODT
Failed to uninstall 32-bit Oracle Client Home 1 (oraparam.ini file missing among other issues)
Installed 32-bit Oracle Client (11g R2) Home 2
Failed to uninstall 32-bit Oracle Client Home 1 (told to use deinstall tool)
Failed to uninstall 32-bit Oracle Client Home 2 (told to use deinstall tool)
Failed to run uninstall tool in Home 1 (told to download standalone deinstall tool)
Uninstalled 32-bit Oracle Client Home 2 (completed successfuly with errors - seriously?)
Uninstalled 32-bit Oracle Client Home 1 (completed successfully, but couldn't delete folder)
Oracle.DataAccess and Oracle.Web are still installed in GAC. Uninstall attempts fail (access denied)
Installed 32-bit Oracle Client (11g R2) Home 1
Tested connectivity from SQL Developer successfully
Tested connectivity from .Net 3.5 successfully (using 32-bit 2.0 dll)
Tested connectivity from .Net 4.0 successfully (using 32-bit 2.0 dll)
Does anyone have any suggestions on getting Oracle Data Tools for Windows to work before I try that again?

I realize ODT uses ODP, but installing release 3 upgraded the .Net 2.0 ODP DLLs (which were installed from the Oracle Client 11g Release 2 install) and added the .Net 4.0 DLLs. After that install everything stopped working from Windows land and then it took the better part of two hours to get it back to what it looked like prior to the install. The other thing weird thing I noticed is that although Oracle.DataAccess is registered in the 2.0 GAC I cannot add a reference that way using VS2010. I have to manually add a reference to the file path. Although it still appears I do not have to have the assembly copied locally to run, so the GAC registration seems to be working in that regard.

Which oracle client works with both Oracle 11.2.0.2 and BizTalk 2006 R2

Hi there
My Oracle11.2.0.2 is installed on linux server. My Biztalk2006R2 is installed on Windows Server 2003 R2 x64. I have already installed BizTalk Adapter for Oracle on the Biztalk server and now require to install Oracle Client to make Biztalk able to retrieve data from Oracle11.2.0.2 using the oracle client.
From the following link,
http://msdn.microsoft.com/en-us/library/aa559822%28v=BTS.20%29.aspx
I came to know that the only oracle clients compatible with Biztalk adapter for oracle are as below:
1) Oracle client 8i
2) oracle client 9i
3) oracle client 10i
Now I need to install an oracle client on biztalk server in order to make biztalk talk to oracle and retrieve data from it.
Question1: which of the above clients should i install on biztalk server that is compatible with both Oracle11.2.0.2 as well as Biztalk server 2006 R2?
Question2: How to install and configure this client to make it work correctly?
Please help.. thanks.
Edited by: manibest on 19-Dec-2012 03:27
Edited by: manibest on 19-Dec-2012 03:27

The Biztalk Adapter interface with Oracle software has information, requirements per referenced document that does not make sense.
E.g. "10i" does not exist and the requirement "Oracle ODBC driver 9.2.0.5.4" means that only 9.2 Client can be used. (Mixing parts from one Database Client product version with another version is not allowed/supported/certified.)
Btw, does that machine happen to have Itanium hardware? (probably no, since you stated x64)
For Oracle's OS requirements, 2003 was certified with/from 9.2.0.3 (and likely also terminal patch set version 9.2.0.8). Not sure about Server 2003 R2, 32 or 64-bit. I'm pretty sure 10.2 was certified on 2003 R2, but the note likely refers to 10.1 versions (before it was known it would be labeled 10g, g for grid replacing the i ).
This FAQ may have some more information: http://www.oracle.com/technetwork/database/windows/faq-100614.html
For Oracle client - server interoperability and certification, there's a support matrix on MOS. See doc id 207303.1.
It seems 9.2 is supported on the wire to operate with 11.2 server, but Client with at least patch set 9.2.0.4 is required.
So, I guess best bet is to find updated requirements.
If you manage to get hold of 9.2.0.5, after verifying that 2003 R2 is ok, then it looks like the puzzle could be put together for a complete picture.
For ease of install, take a look at the Instant Client. (However, there's no 9.2 IC, that type of client install came later)
http://www.oracle.com/technetwork/database/features/instant-client/index-097480.html
Edit;
some corrections, specially about 9.2 version
Edited by: orafad on Dec 19, 2012 10:58 PM

Can't Recorde Response file for Oracle client 11.2.0.3 windows 32bit

Hello
We are going to upgrade our Oracle client on our clients to 11.2.0.3. But I can not record a resopnsfile with setup.exe.
Have Oracle removed this feature?
Here's a dump from setup.exe -help
There is no possibility to run setup.exe witch -record -destinationfile option
Preparing to launch Oracle Universal Installer from C:\Users\Test\AppData\Local\
Temp\OraInstall2013-01-14_02-12-48PM. Please wait ... Usage:
setup [-options] [(<CommandLineVariable=Value>)*]
Where options include:
-clusterware oracle.crs,<crs version>
Version of Cluster ready services installed.
-crsLocation <Path>
Used only for cluster installs, specifies the path to the crs home locat
ion. Specifying this overrides CRS information obtained from central inventory.
-invPtrLoc <full path of oraInst.loc>
Unix only. To point to a different inventory location. The orainst.loc f
ile contains:
inventory_loc=<location of central inventory>
inst_group=<>
-jreLoc <location>
Path where Java Runtime Environment is installed. OUI cannot be run with
out it.
-logLevel <level>
To filter log messages that have a lesser priority level than <level>. V
alid options are: severe, warning, info, config, fine, finer, finest, basic, gen
eral, detailed, trace. The use of basic, general, detailed, trace is deprecated.
-paramFile <location of file>
Specify location of oraparam.ini file to be used by OUI.
-responseFile <Path>
Specifies the response file and path to use.
-attachHome
For attaching homes to the OUI inventory.
-cfs
Indicates that the Oracle home specified is on cluster file system (shar
ed). This is mandatory when '-local' is specified so that Oracle Universal Insta
ller can register the home appropriately into the inventory.
-clone
For making an Oracle Home copy match its current environment.
-debug
For getting the debug information from OUI.
-detachHome
For detaching homes from the OUI inventory without deleting inventory di
rectory inside Oracle home.
-enableRollingUpgrade
Used in cluster environment, to enable upgrade of a product on a subset
of nodes (on which the product was installed).
-executeSysPrereqs
Execute system pre-requisite checks and exit.
-force
Allowing silent mode installation into a non-empty directory.
-help
Displays above usage.
-ignoreSysPrereqs
For ignoring the results of the system pre-requisite checks.
-local
Performs the operation on the local node irrespective of the cluster nod
es specified.
-printdiskusage
Log debug information for disk usage.
-printmemory
Log debug information for memory usage.
-printtime
Log debug information for time usage.
-relink
For performing relink actions on the oracle home
Usage: -relink -maketargetsxml <location of maketargetsxml> [-makedepsx
ml <location of makedepsxml>] [name=value]
-silent
For silent mode operations, the inputs can be a response file or a list
of command line variable value pairs.
-waitforcompletion
Installer will wait for completion instead of spawning the java engine a
nd exiting.
-suppressPreCopyScript
Suppress the execution of precopy script.
-acceptUntrustedCertificates
Accept untrusted certificates from a secure site.
-suppressPostCopyScript
Suppress the execution of postcopy script.
-noconfig
Do not execute config tools.
-noconsole
For suppressing display of messages to console. Console is not allocated
-formCluster
To install the Oracle clusterware in order to form the cluster.
-remotecp <Path>
Unix specific option. Used only for cluster installs, specifies the path
to the remote copy program on the local cluster node.
-remoteshell <Path>
Unix specific option. Used only for cluster installs, specifies the path
to the remote shell program on the local cluster node.
-executePrereqs
To execute only the prerequisite checks.
-ignorePrereq
To ignore running the prerequisite checks.
-ignoreInternalDriverError
To ignore any internal driver errors.
-downloadUpdates
To download updates only.
-showProgress
To show the installation progress on the console. This option is support
ed only in case of silent installation.
Command Line Variables Usage
Command line variables are specified using <name=value>; for example:
[ session: | compName: | compName:version: ]variableName=" valueOfVariable"]
Session/Installer variables are specified using:
[session:]varName=value
Ex 1: session:ORACLE_HOME_NAME="OraHome"
Ex 2: ORACLE_HOME_NAME="OraHome"
The lookup order is session:varName then just varName. The session prefix is
used to avoid ambiguity.
Component variables are specified using:
[compInternalName:[Version:]]varName
Ex 1: oracle.comp1:1.0.1:varName="VarValue"
Ex 2: oracle.comp1:varName="VarValue"
The lookup order is compInternalName:Version:varName, then compInternalName:
varName, then just varName.
Please press Enter to exit...

Hi,
There is no record option with 11gR2.
There is no need to use '-record' flag to record/save the response file. At Summary page of installation, 11gR2 installer provides option to save the response file. We can perfom the silent installation using this saved response file
Unix:
./runInstaller -silent -responseFile <saved_response-file>
Windows:
c:\software\11.2.0.1\database\setup.exe -responseFile <saved_response-file>
For more details, kindly refer
11gR2 Install (Non-RAC): Understanding New Changes With All New 11.2 Installer (Doc ID 884232.1)
4th point in the document explains about this
Thanks,
Krishna

Where to download Oracle client installation .exe file

Hi,
I need to install an Oracle client on a Windows Server 2008 (32-bit), how do I do that?
I want to install Oracle client version 10.2.0.4 (Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications).
I can't find a .exe installation file, does anyone one know if there is a .exe file available and if so where can I download it? I have just found .jar installation files.

user11207131 wrote:
Guys,
Sorry for hijacking this thread – what would you recommend to run ODP.NET on 2008 R2?
Do I need to install Instant Client 11.1.0.7.0 and ODAC10203 on top?In addition to asking in the "I have a problem with getting a download" forum, you could ask in the "Windows and .NET >> ODP.NET" forum at ODP.NET

I REALLY need to find Oracle Client File

I was installing a copy of Oracle 8i - 8.1.7 on a Unix operating system. After installation I tried to locate the client file so that I can start up the client, but to my surprise I could not find the client file(s) - program. Do you know what filename under the Oracle directory contains the client file. Without this I cannot run any of the great wizards that Oracle has to offer.

Well, there are a whole lot of files that come under the broad category of 'Oracle client'. There's presumably a /bin directory that has a number of utilities like SQL*Plus available...
Justin

Installing oracle client 10g with response file

Hello,
I'm trying to do a installation of oracle 10g client. I did a setup with the record option (to create responsefile). Everything is installed and works well. When I use the responsefile created from the record option, it does not install all option I had chosen, allthough the responsefile gives them.
this is the responsefile:
## Copyright (c) 1999, 2004 Oracle. All rights reserved. ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## identifies the variable type. ##
## Please specify the values in the following format: ##
## Type Example ##
## String "Sample Value" ##
## Boolean True or False ##
## Number 1000 ##
## StringList {"String value 1","String Value 2"} ##
## The values that are given as <Value Required> need to be ##
## specified for a silent installation to be successful. ##
## This response file is generated by Oracle Software ##
## Packager. ##
RESPONSEFILE_VERSION=2.2.1.0.0
#Name : UNIX_GROUP_NAME
#Datatype : String
#Description: Unix group to be set for the inventory directory. Valid only in Unix platforms.
#Example: UNIX_GROUP_NAME = "install"
UNIX_GROUP_NAME=<Value Unspecified>
#Name : FROM_LOCATION
#Datatype : String
#Description: Complete path to the products.xml.
#Example: FROM_LOCATION = "..\stage\products.xml"
FROM_LOCATION="..\stage\products.xml"
#Name : FROM_LOCATION_CD_LABEL
#Datatype : String
#Description: This variable should only be used in multi-CD installations. It includes the label of the compact disk where the file "products.xml" exists. The label can be found in the file "disk.label" in the same directory as products.xml.
#Example: FROM_LOCATION_CD_LABEL = "CD Label"
FROM_LOCATION_CD_LABEL=<Value Unspecified>
#Name : ORACLE_HOME
#Datatype : String
#Description: Complete path of the Oracle Home.
#Example: ORACLE_HOME = "C:\OHOME1"
ORACLE_HOME="C:\Oracle\product\10\cl_cip1"
#Name : ORACLE_HOME_NAME
#Datatype : String
#Description: Oracle Home Name. Used in creating folders and services.
#Example: ORACLE_HOME_NAME = "OHOME1"
ORACLE_HOME_NAME="CLIENT10"
#Name : TOPLEVEL_COMPONENT
#Datatype : StringList
#Description: The top level component to be installed in the current session.
#Example: TOPLEVEL_COMPONENT = {"oracle.client","10.1.0.2.0"}
TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
#Name : SHOW_SPLASH_SCREEN
#Datatype : Boolean
#Description: Set to true if the initial splash screen in OUI needs to be shown.
#Example: SHOW_SPLASH_SCREEN = true
SHOW_SPLASH_SCREEN=true
#Name : SHOW_WELCOME_PAGE
#Datatype : Boolean
#Description: Set to true if the Welcome page in OUI needs to be shown.
#Example: SHOW_WELCOME_PAGE = false
SHOW_WELCOME_PAGE=true
#Name : SHOW_CUSTOM_TREE_PAGE
#Datatype : Boolean
#Description: Set to true if the custom tree page in OUI needs to be shown.
#Use this page to select or de-select dependencies. This page appears only in a custom install type.
#Example: SHOW_CUSTOM_TREE_PAGE = false
SHOW_CUSTOM_TREE_PAGE=true
#Name : SHOW_COMPONENT_LOCATIONS_PAGE
#Datatype : Boolean
#Description: Set to true if the component locations page in OUI needs to be shown.
#This page only appears if there are products whose installed directory can be changed.
#If you set this to false you will prevent the user from being able to specify alternate directories.
#Example: SHOW_COMPONENT_LOCATIONS_PAGE = false
SHOW_COMPONENT_LOCATIONS_PAGE=true
#Name : SHOW_SUMMARY_PAGE
#Datatype : Boolean
#Description: Set to true if the summary page in OUI needs to be shown.
#The summary page shows the list of components that will be installed in this session.
#Example: SHOW_SUMMARY_PAGE = true
SHOW_SUMMARY_PAGE=true
#Name : SHOW_INSTALL_PROGRESS_PAGE
#Datatype : Boolean
#Description: Set to true if the install progress page in OUI needs to be shown.
#This page shows the current status in the installation. The current status includes the product being installed and the file being copied.
#Example: SHOW_INSTALL_PROGRESS_PAGE = true
SHOW_INSTALL_PROGRESS_PAGE=true
#Name : SHOW_REQUIRED_CONFIG_TOOL_PAGE
#Datatype : Boolean
#Description: Set to true if the required config assistants page in OUI needs to be shown.
#This page shows the list of required configuration assistants that are part of this installation.
#It shows the status of each assistant, including any failures with detailed information on why it failed.
#Example: SHOW_REQUIRED_CONFIG_TOOL_PAGE = true
SHOW_REQUIRED_CONFIG_TOOL_PAGE=true
#Name : SHOW_CONFIG_TOOL_PAGE
#Datatype : Boolean
#Description: Set to true if the config assistants page in OUI needs to be shown.
#This page shows the list of configuration assistants that are part of this installation and are configured to launch automatically.
#It shows the status of each assistant, including any failures with detailed information on why it failed.
#Example: SHOW_CONFIG_TOOL_PAGE = true
SHOW_CONFIG_TOOL_PAGE=true
#Name : SHOW_RELEASE_NOTES
#Datatype : Boolean
#Description: Set to true if the release notes of this installation need to be shown at the end of installation.
#This dialog is launchable from the End of Installation page and shows the list of release notes available for the products just installed.
# This also requires the variable SHOW_END_SESSION_PAGE variable to be set to true.
#Example: SHOW_RELEASE_NOTES = true
SHOW_RELEASE_NOTES=true
#Name : SHOW_ROOTSH_CONFIRMATION
#Datatype : Boolean
#Description: Set to true if the Confirmation dialog asking to run the root.sh script in OUI needs to be shown.
#Valid only for Unix platforms.
#Example: SHOW_ROOTSH_CONFIRMATION = true
SHOW_ROOTSH_CONFIRMATION=true
#Name : SHOW_END_SESSION_PAGE
#Datatype : Boolean
#Description: Set to true if the end of session page in OUI needs to be shown.
#This page shows if the installation is successful or not.
#Example: SHOW_END_SESSION_PAGE = true
SHOW_END_SESSION_PAGE=true
#Name : SHOW_EXIT_CONFIRMATION
#Datatype : Boolean
#Description: Set to true if the confirmation when exiting OUI needs to be shown.
#Example: SHOW_EXIT_CONFIRMATION = true
SHOW_EXIT_CONFIRMATION=true
#Name : NEXT_SESSION
#Datatype : Boolean
#Description: Set to true to allow users to go back to the File Locations page for another installation. This flag also needs to be set to true in order to process another response file (see NEXT_SESSION_RESPONSE).
#Example: NEXT_SESSION = true
NEXT_SESSION=false
#Name : NEXT_SESSION_ON_FAIL
#Datatype : Boolean
#Description: Set to true to allow users to invoke another session even if current install session has failed. This flag is only relevant if NEXT_SESSION is set to true.
#Example: NEXT_SESSION_ON_FAIL = true
NEXT_SESSION_ON_FAIL=true
#Name : NEXT_SESSION_RESPONSE
#Datatype : String
#Description: Optionally specifies the full path of the next session's response file. If only a file name is specified, the response file is retrieved from the <TEMP>/oraInstall directory. This variable is only active if NEXT_SESSION is set to true.
#Example: NEXT_SESSION_RESPONSE = "nextinstall.rsp"
NEXT_SESSION_RESPONSE=<Value Unspecified>
#Name : DEINSTALL_LIST
#Datatype : StringList
#Description: List of components to be deinstalled during a deinstall session.
#Example: DEINSTALL_LIST = {"oracle.client","10.1.0.2.0"}
DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
#Name : SHOW_DEINSTALL_CONFIRMATION
#Datatype : Boolean
#Description: Set to true if deinstall confimation is needed during a deinstall session.
#Example: SHOW_DEINSTALL_CONFIRMATION = true
SHOW_DEINSTALL_CONFIRMATION=true
#Name : SHOW_DEINSTALL_PROGRESS
#Datatype : Boolean
#Description: Set to true if deinstall progress is needed during a deinstall session.
#Example: SHOW_DEINSTALL_PROGRESS = true
SHOW_DEINSTALL_PROGRESS=true
#Name : ACCEPT_LICENSE_AGREEMENT
#Datatype : Boolean
#Description: By setting this variable to true, you are accepting the license agreement. This variable is used only for silent installations.
#Example: ACCEPT_LICENSE_AGREEMENT = true
ACCEPT_LICENSE_AGREEMENT=false
#Name : SELECTED_LANGUAGES
#Datatype : StringList
#Description: Languages in which the components will be installed.
#Component : oracle.client
SELECTED_LANGUAGES={"en"}
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
#Component : oracle.client
INSTALL_TYPE="Custom"
#Name : DEPENDENCY_LIST
#Datatype : String
#Description: List of dependees that need to be installed along with this product.
#Component : oracle.client
oracle.client:DEPENDENCY_LIST="{oracle.networking.netcltprod:10.1.0.2.0,oracle.rdbms.sqlplus:10.1.0.2.0,oracle.winprod:10.1.0.2.0,oracle.swd.opatch:10.1.0.2.0}"
#Name : DEPENDENCY_LIST
#Datatype : String
#Description: List of dependees that need to be installed along with this product.
#Component : oracle.winprod
oracle.winprod:DEPENDENCY_LIST="{oracle.p2k.odbc:10.1.0.2.0,oracle.p2k.oledb:10.1.0.2.0}"
#Name : OPTIONAL_CONFIG_TOOLS
#Datatype : String
#Description: #The following choices are available. The value should contain only one of these choices.
#The choices are of the form Internal Name : External name. Please use the internal name while specifying the value.List of optional config assistants that need to be launched.
# netca, : Oracle Net Configuration Assistant
# netca_deinst, : Oracle Net Configuration Assistant - Deinstall Script
#Example: OPTIONAL_CONFIG_TOOLS = {"netca"}
#Component : oracle.networking.netca
oracle.networking.netca:OPTIONAL_CONFIG_TOOLS="{}"
#Name : OPTIONAL_CONFIG_TOOLS
#Datatype : String
#Description: #The following choices are available. The value should contain only one of these choices.
#The choices are of the form Internal Name : External name. Please use the internal name while specifying the value.List of optional config assistants that need to be launched.
# vipca, : Virtual Private IP Configuration Assistant
#Example: OPTIONAL_CONFIG_TOOLS = {"vipca"}
#Component : oracle.options.ops.vipca
oracle.options.ops.vipca:OPTIONAL_CONFIG_TOOLS="{}"
#Name : OPTIONAL_CONFIG_TOOLS
#Datatype : String
#Description: #The following choices are available. The value should contain only one of these choices.
#The choices are of the form Internal Name : External name. Please use the internal name while specifying the value.List of optional config assistants that need to be launched.
# LocalConfig, : Deinstall Oracle Cluster Synchronization Service
#Example: OPTIONAL_CONFIG_TOOLS = {"LocalConfig"}
#Component : oracle.options.ops.csscommon
oracle.options.ops.csscommon:OPTIONAL_CONFIG_TOOLS="{}"
#Name : s_recodHTTPPort
#Datatype : String
#Description: HTTP listener port for the recod service
#Component : oracle.cartridges.ordmts
s_recodHTTPPort=<Value Unspecified>
products not installad for example: odbc, oledb ...
in oracle log I found this:
oracle.p2k.oo4o Product Location: Empty path specified.
oracle.p2k Product Location: Empty path specified.
Setting the PROD_HOME variable of 'oracle.p2k.oledb_10.1.0.2.0' to ''. Received the value from the variable calculation.
oracle.p2k.oledb Product Location: Empty path specified.
for installation: setup.exe -responsefile pathresponsefile\resp.rp -silent
is there something that I'm missing or doing wrong?
thx
Message was edited by:
duvelke

Well, from our .rsp files for Database Client installs:
oracle.client:DEPENDENCY_LIST={"oracle.winprod:10.2.0.1.0"}
oracle.winprod:DEPENDENCY_LIST={"oracle.odbc:10.2.0.1.0"}
# ODBC
#oracle.winprod:DEPENDENCY_LIST={"oracle.odbc:10.2.0.1.0"}
# OLE DB
#oracle.winprod:DEPENDENCY_LIST={"oracle.ntoledb:10.2.0.1.0"}
# ODP.NET för .NET v1
#oracle.winprod:DEPENDENCY_LIST={"oracle.ntoledb.odp_net:10.2.0.1.0"}
If you need ODP for .NET v2, you should complement the Oracle Home with install from ODAC 10.2.0.2.x (what a mess, isn't it).

Oracle Client TimeZone Files

Hi,
I have several window servers with the Oracle Client installed.
These servers connect to our Oracle DB server on 2003 windows.
I want to apply the Jan 2010 CPU patch to the DB and this says it must be version 4 timezone files.
How do I check the clients timezone files on the other servers to match version 4 of the DB ?
Thanks,

listener.ora is must in server
tnsnames.ora is must in client and in server (if multiple servers are integrated through database by application)
sqlnet.ora is optional in both client and server (is must if domain naming is used)

Error in installing Oracle client 11g on Windows 2008 R2 (64bit) XenApp 6

I am trying to install "win64_11gR2_client.zip" Oracle 11g Client 64bit on Windows 2008 R2 that has been clamped and restricted by our security department. Details of the clamp:
http://support.microsoft.com/kb/885409
The Windows 2008 R2 server is running on CITRIX XenApp 6.
When we try to install the client on a normal version of Windows 2008 R2 without the Clamp, the installation follows through and successfully. However, when we try to install the 11g Client on the Clamped Windows 2008 R2, we get the error below:
[INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'
This indicates the primary issue is with the clamp. My issue now is knowing what exactly is causing the error. what restrictions should I enable from the clamp in order to get the installation working?
Here is the error log:
Error log:
INFO: Loading data from: jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Loading beanstore from a given input stream
INFO: Translating external format into raw format
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.CustomInstallGUI added to View Type Registry with the key as [CustomInstallUI]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.SchedulerAgentGUI added to View Type Registry with the key as [SchedulerAgentUI]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.OraMTSGUI added to View Type Registry with the key as [OraMTSUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallLocationGUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallTypesGUI added to View Type Registry with the key as [InstallTypesUI]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.FinishGUI added to View Type Registry with the key as [FinishUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Releas
e 2\client\install\../stage/products.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME mndwg068cs.rad.afpaa.r.mil.uk
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 49155
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@2398dc19
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Runtime
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@1875a340
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en, en_GB]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@15837e8
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: PATH has :==>C:\Users\setupc\AppData\Local\Temp\OraInstall2011-10-10_04-13-35PM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;D:\ORADEV10g\jdk\jre\bin\classic;D:\ORADEV10g\jdk\jre\bin;D:\ORADEV10g\jdk\jre\bin\client;D:\ORADEV10g\jlib;D:\ORADEV10g\bin;D:\ORADEV10g\jre\1.4.2\bin\client;D:\ORADEV10g\jre\1.4.2\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files (x86)\Citrix\system32\;C:\Program Files (x86)\Citrix\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\System32\Citrix\IMA\Subsystems;C:\Windows\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\system32;C:\Program Files (x86)\Common Files\Citrix\System32\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]2ac
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:3.9996GB (4193848.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:130MB
INFO: Actual Value:26.0185GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:1023
INFO: Actual Value:791
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]
WARNING: Failed to load the view [SummaryUI] . Reason: .
Refer associated stacktrace #oracle.install.commons.flow.ViewManager:367
INFO: Terminating all background operations
INFO: Terminated all background operations
SEVERE: [FATAL] [INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'.
CAUSE: The given class do not represent a valid View class or an unexpected error occured while instantiating it.
ACTION: No additional information available.
SUMMARY:
- java.lang.NullPointerException.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:370
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup Driver

Hi;
Please see below note than Please see:
Master Note For Oracle Database Client Installation [ID 1157463.1]
*+<Moderator edit - MOS Doc content deleted - pl do not post contents of MOS Docs>+*
If notes not help than i suggest rise SR
Regard
Helios

Couldn't initialize Oracle client library

Hi,gurus:
My IDES4.7 installed windows200 with DB oracle9I,it's ok before. but after i repaired the OS after a vital error, once i started the SAPMMC, first it's yellow, after a wile it's green but later the disp+work.exe turned grey.
the flowing is the log from dev_w2
Please do me a favor,thanks a lot.
trc file: "dev_w2", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Wed Jul 02 20:28:15 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' ...
B Library 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' loaded
B Version of 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno      00
M sid        HFS
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    221
M intno      20020600
M make:      multithreaded, ASCII
M pid        2404
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 2404) [dpxxdisp.c   1164]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M
M Wed Jul 02 20:28:16 2008
M DpShMCreate: sizeof(wp_adm)          13312     (832)
M DpShMCreate: sizeof(tm_adm)          2379840     (11840)
M DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
M DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M DpShMCreate: sizeof(comm_adm)          192000     (384)
M DpShMCreate: sizeof(vmc_adm)          0     (364)
M DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 06DE0040, size: 2672144)
M DpShMCreate: allocated sys_adm at 06DE0040
M DpShMCreate: allocated wp_adm at 06DE17D8
M DpShMCreate: allocated tm_adm_list at 06DE4BD8
M DpShMCreate: allocated tm_adm at 06DE4C00
M DpShMCreate: allocated wp_ca_adm at 07029C40
M DpShMCreate: allocated appc_ca_adm at 0702E290
M DpShMCreate: allocated comm_adm_list at 0702FA00
M DpShMCreate: allocated comm_adm at 0702FA18
M DpShMCreate: allocated vmc_adm_list at 0705E818
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0705E840
M DpShMCreate: allocated wall_adm at 0705E848
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Jul 02 20:28:17 2008
M calling db_connect ...
C Prepending D:\oracle\ora92 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C *** ERROR => Couldn't initialize Oracle client library,
please check your installation!
[dbsloci.c    2015]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1282]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9696]
M
M Info for wp 2
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server shining_HFS_00 on host shining (wp 2)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Wed Jul 02 20:28:17 2008
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9881
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 2 2404) [dpnttool.c   357]

Hello Wang,
> C *** ERROR => Couldn't initialize Oracle client library,
Have you also restored / re-installed the oracle client libs on your windows system? It seems like the oracle client libs are missing.
Regards
Stefan

Oracle Client 11gR2 installation issue on RHEL v5.4 64-bit

Hi,
I am trying to install Oracle Client software 11gR2 on RHEL v5.4 64-bit. I have resolved all the libraries dependency as well as Kernel changes as suggested by the installer. The error in the log file is as attached. At present I have "skipped" this error and proceeded with installation.
While installing the client, the installer fails while configuring the Net CA with error:
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: #
INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0xe5e97498, pid=27377, tid=4160075984
INFO: #
INFO: # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b02 mixed mode)
INFO: # Problematic frame:
INFO: # C [libnnz11.so+0x3c498]
INFO: #
INFO: # An error report file with more information is saved as hs_err_pid27377.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
WARNING: /home/oracle/app/oracle/product/11.2.0/client_1/bin/netca: line 178: 27377 Aborted $JRE $JRE_OPTIONS -classpath $CLASSPATH oracle.ne
t.ca.NetCA $*
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
Also when I invoke the SQL Client; sqlplus user@db and enter the password, the sqlplus exits without any error and returns to the terminal console. Please note earlier I has getting a SELinux violation and have changed it to "permissive" mode
Please let me know how to resolve NetCA installation and the sqplus issue.
Thanks & regards,
Vinay

Hi,
Thet NetCA error occurs during installation and I believe the installer should take care of the ORACLE_HOME variable setting.
But before invoking sqlplus I have set the ORACLE_HOME and LD_LIBRARY_PATH setting in the .bash_profile as mentioned in the installation guide. The snippet of the profile file is:
export ORACLE_HOME=~/app/oracle/product/11.2.0/client_1
export JAVA_HOME=$ORACLE_HOME/jdk
export PATH=$ORACLE_HOME/bin:$JAVA_HOME/bin:$PATH;
export LD_LIBRARY_PATH=$ORACLE_HOME:$LD_LIBRARY_PATH
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TWO_TASK=mmcoedb
I am able to tnsping to the server/service name too but when I try to login using the user/password using sqlplus, it simply exits without any error.
Please let me know how to resolve the error.
Best regards,
Vinay

Unable to open Oracle client "not located OCI.dll" (URGENT)

Hi Experts,
I was installed the Oracle client 10g in my server to use the UDL file. for that i was installed oraOLEDB10.dll . now i am trying to connect to database servier from client throughing the error
The procedure entry point lxsCnvIntToNumStr could not be located in the dynamic link library OCI.dll.
Please help on this
Regards
KumarK

Obviously it is not urgent.
If it was truly urgent, you would:
1) use your support contract to ask Oracle Support and/or
2) describe in detail what your internet searching has found, what efforts you have tried and what has failed, and/or
3) provide operating system information (which Windows, which edition, which service pack) and client information (how many Oracle products are installed, which versions, which patches)

Error :"The provider is not compatible with the version of Oracle client"

Hi guys!
I'm facing this problem:
When my .Net application tries to access the DB, I get this error message above.
The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
-Oracle Data Provider for .NET 1.x 10.2.0.2.20
-Oracle Data Provider for .NET 2.0 10.2.0.2.20
-Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
-Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
-Oracle Provider for OLE DB 10.2.0.2.20
-Oracle Objects for OLE 10.2.0.2.20
-Oracle Services For Microsoft Transaction Server 10.2.0.1.0
-Oracle Net 10.2.0.1.0
-Oracle Universal Installer 10.2.0.2.0
Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
These are the Oracle assemblies installes in 'C:\Windows\Assembly':
Windows Vista Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Windows Server Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
What should I check and do to solve this problems?
Thanks for help,
Anderson

Hi,
Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
- Read & Execute
- List folder contents
- Read
Regards,
Mark

Getting "The provider is not compatible with the version of Oracle client"

Hi,
By reading though posts this appears to be a very common and some people have been able to solve it by putting their OracleDataAccess.dll and support files in the same folder as the exe. However, I tried putting the OracleDataAccess.dll, oci.dll, ociw32.dll, orannzsbb11.dll, and oraocci11.dll in the folder and the problem persists.
This application works fine on my development system (Windows 7 64, VS2010 SP1) and 2 of our 3 servers (Windows 2008 R2). But on this one server it does not work! The problem first appeared when a developer installed ODT with ODAC 112030 on server. We installed a full version of the 11.2.0.1.0 Oracle Client (this matches our other servers) and removed the clients created by the ODT with ODAC 112030 install. However, I fear there is something somewhere that was not deinstalled causing the issue. Any thought on how we can track down and eliminate this problem.
Thanks,
Jerry
Edited by: user13142870 on May 22, 2012 9:51 AM

I changed the CPU to x86 in the solutions and the project is now working.

Oracle Client 10i archieve is broken (file "10g_win32_client.zip")

Similar Messages

Maybe you are looking for