Oracle Client 8.17 fails to complete install

I am having significant difficulty in installing the Oracle 8.17 client software on a new Dell P4 portable. I found and implemented the discussed solution for the symcjit file and the oraparam.ini file modification from this forum. I still have a failure in the installation
at 100% which states "Unable to Locate DLL" "The dynamic link library oracore8.dll could not be found in the specified path. Has anyone seen this particular issue before?

dump the client-installation into hard disk.
rename symcjit.dll to something else.
start the installation.
NO NEED TO CHANGE ini files...

Similar Messages

CC Acrobat Fails to complete install. Stops at 43%. Attempts 4X.

CC Acrobat Fails to complete install. Stops at 43%. Attempts 4X. Help.

Jo Elon2,
Please go through the link below and check.
Blank EULA screen appears on Acrobat XI launch
Regards,
Anand

Oracle Net Configuration Assistant failed. While Installing

HI ,
I was getting an Error while installing Oracle11g on Redhat linux 5.4.
The Error was
'Oracle Net Configuration Assistant failed.'
I am attaching the Last few lines of the Install Actions Files ,
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - /soa/oracle/oracle/product/11.2.0/dbhome_1/cfgtoollogs
INFO:
The Runconfig command constructed is /soa/oracle/oracle/product/11.2.0/dbhome_1/oui/bin/runConfig.sh ORACLE_HOME=/soa/oracle/oracle/product/11.2.0/dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file /soa/oracle/oracle/product/11.2.0/dbhome_1/cfgtoollogs/configToolAllCommands
INFO: Since the option is to overwrite the existing /soa/oracle/oracle/product/11.2.0/dbhome_1/cfgtoollogs/configToolAllCommands file, backing it up
INFO: The backed up file name is /soa/oracle/oracle/product/11.2.0/dbhome_1/cfgtoollogs/configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@11d6591
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Parsing command line arguments:
INFO: Parameter "orahome" = /soa/oracle/oracle/product/11.2.0/dbhome_1
INFO: Parameter "orahnam" = OraDb11g_home1
INFO: Parameter "instype" = typical
INFO: Parameter "inscomp" = client,oraclenet,javavm,server,ano
INFO: Parameter "insprtcl" = tcp
INFO: Parameter "cfg" = local
INFO: Parameter "authadp" = NO_VALUE
INFO: Parameter "responsefile" = /soa/oracle/oracle/product/11.2.0/dbhome_1/network/install/netca_typ.rsp
INFO: Parameter "silent" = true
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: Profile configuration complete.
INFO: Oracle Net Listener Startup:
INFO: Running Listener Control:
INFO: /soa/oracle/oracle/product/11.2.0/dbhome_1/bin/lsnrctl start LISTENER
INFO: Listener Control complete.
INFO: Listener start failed.
**INFO: Check the trace file for details: /soa/oracle/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-1209172PM0322.log**
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
Iam Attaching the last few lines of /soa/oracle/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-1209172PM0322.log
[main] [ 2012-09-17 14:03:25.027 IST ] [RuntimeExec.runCommand:161] RunTimeExec: output>
[main] [ 2012-09-17 14:03:25.027 IST ] [RuntimeExec.runCommand:170] RunTimeExec: error>
[main] [ 2012-09-17 14:03:25.028 IST ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[main] [ 2012-09-17 14:03:25.028 IST ] [CmdToolUtil.doexecute:372] nativeSystem.runRemoteExecCmd failed. Command = /soa/oracle/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = [] env = null
[main] [ 2012-09-17 14:03:25.028 IST ] [HAUtils.isHASConfigured:349] Ignoring exception in isHASConfigured: PRCT-1011 : Failed to run "getcrshome"
[main] [ 2012-09-17 14:03:25.028 IST ] [HAUtils.isHASConfigured:350] oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:423)
oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:345)
oracle.net.ca.ConfigureListener.isHASConfigured(ConfigureListener.java:1428)
oracle.net.ca.ConfigureListener.isHASRunning(ConfigureListener.java:1450)
oracle.net.ca.ConfigureListener.validateListenerName(ConfigureListener.java:1697)
oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:169)
oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
oracle.net.ca.InitialSetup.<init>(NetCA.java:4159)
oracle.net.ca.NetCA.main(NetCA.java:405)
[main] [ 2012-09-17 14:03:25.029 IST ] [ConfigureListener.isHASConfigured:1436] Is Oracle Restart configured: false
[main] [ 2012-09-17 14:03:25.029 IST ] [ConfigureListener.isHASRunning:1465] Is Oracle Restart running: false
[main] [ 2012-09-17 14:03:25.029 IST ] [ConfigureListener.typicalConfigure:201] Checking for free port in range: 1521-1540
[main] [ 2012-09-17 14:03:25.029 IST ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
[main] [ 2012-09-17 14:03:25.030 IST ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2012-09-17 14:03:25.030 IST ] [ConfigureListener.isPortFree:1025] Local host IP address: vx111a.example.com/172.16.11.175
[main] [ 2012-09-17 14:03:25.030 IST ] [ConfigureListener.isPortFree:1027] Local host name: vx111a.example.com
[main] [ 2012-09-17 14:03:25.031 IST ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: vx111a.example.com/172.16.11.175
[main] [ 2012-09-17 14:03:25.033 IST ] [ConfigureListener.isPortFree:1042] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.033 IST ] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2012-09-17 14:03:25.033 IST ] [ConfigureListener.isPortFree:1059] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.033 IST ] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port:1521
[main] [ 2012-09-17 14:03:25.033 IST ] [ConfigureListener.isPortFree:1068] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.034 IST ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: true
[main] [ 2012-09-17 14:03:25.034 IST ] [ConfigureListener.typicalConfigure:208] Using port: 1521
[main] [ 2012-09-17 14:03:25.039 IST ] [ConfigureListener.setListenerParam:1779] Setting ADR_BASE_LISTENER: /soa/oracle/oracle
[main] [ 2012-09-17 14:03:25.040 IST ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
[main] [ 2012-09-17 14:03:25.041 IST ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2012-09-17 14:03:25.041 IST ] [ConfigureListener.isPortFree:1025] Local host IP address: vx111a.example.com/172.16.11.175
[main] [ 2012-09-17 14:03:25.041 IST ] [ConfigureListener.isPortFree:1027] Local host name: vx111a.example.com
[main] [ 2012-09-17 14:03:25.041 IST ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: vx111a.example.com/172.16.11.175
[main] [ 2012-09-17 14:03:25.042 IST ] [ConfigureListener.isPortFree:1042] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.042 IST ] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2012-09-17 14:03:25.042 IST ] [ConfigureListener.isPortFree:1059] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.042 IST ] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port:1521
[main] [ 2012-09-17 14:03:25.043 IST ] [ConfigureListener.isPortFree:1068] Created ServerSocket successfully.
[main] [ 2012-09-17 14:03:25.043 IST ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: true
Please Soft Me Out.

user9030848 wrote:
Where can i find that listener log file ?Zoltan gave you the specific, one-time answer.
The generalized, learn-to-self-help answer is:
Use your os's search utility to fiind any file you want. In the case of Linux, that utility is called 'find'. Instructions on how to use it are all over the net, and the official documentation for all Linux utilties installed on your system can be read by using the 'man' command (ie: 'man find').
To tie the general to the specific, you would use
find / -name listener.log Or, faster and fewer error messages
find $ORACLE_HOME -name listener.log

SCCM Client PC's failing to download/install Windows Updates

Hi,
Last month I noticed that our client PC's, shortly after they had built (using SCCM Task Sequence) were downloading and installing Windows Updates using the usual Windows Update process. What I mean is, I had Software Centre showing Updates as installing,
but also had the Windows Update agent installing various updates. It was also showing in the start menu (Yellow icon saying Shut down and install updates). Now my understanding is, that that shouldn't of been happening, and only SCCM/Software Centre should
be showing Windows Updates as installing.
I noticed that we had some GPO's set for Windows Updates, which I have disabled, as I believed these were not necessary. Also, I like to control my Updates via SCCM Software Update groups after testing them, and not just allow clients to grab any updates
that are required and approved.
My problem now is, none of the clients are getting/installing any updates. I'm getting the following errors in the WUAHandler.log:
Unable to read existing WUA resultant policy. Error = 0x80070002.
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
Failed to Add Update Source for WUAgent of type (2) and id ({FC358571-80C5-4EAA-8A33-F79AD4C14785}). Error = 0x87d00692.
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
So, I've checked in:
HKLM\Software\Policies\Microsoft\Windowa\WindowsUpdate\ & HKLM\Software\Wow6432Node\Policies\Microsoft\Windows\WindowsUpdate
and neither have a WSUS server set. I'm assuming this is correct?
RSOP shows all policies in \\Computer Configuration\Administrative Templates\Windows Components\Windows Update as
DISABLED
GPEDIT shows \\Computer Configuration\Administrative Templates\Windows Components\Windows Update\Specify intranet Microsoft update service location as
Enabled and as our server (https://XXX.XXX:8531) - I'm assuming this is what SCCM client sets as if I changed this setting and then restart the setting comes back. If it was a Group Policy conflict then I
would expect to see it in RSOP.
Does anyone have any suggestions? I'm puzzled as to what to look at next. Is my first assumption of having 0 group policies configured for WSUS correct? Am I also correct in assuming Windows Updates shouldn't show in Control panel, or at the Start > Shutdown
prompt, and only show in Software Centre?
Thanks, and sorry for the long winded post!

Hey Jason,
Thanks for replying and explaining the WUA stuff. That made sense to be but my mind was being clouded by the issue all of the PC's/Clients onsite were, and are still getting. I cleared out the Group Policy cache as detailed on the link.
- Cleared C:\Program Data\Microsoft\Group Policy\History\*.*
- Ran a gpupdate /force
- Restarted PC
Issue still remains. Here is the output from the WUAHandler.log
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles
WUAHandler 13/04/2015 16:14:34 2508 (0x09CC)
Its a WSUS Update Source type ({FC358571-80C5-4EAA-8A33-F79AD4C14785}), adding it. WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Unable to read existing resultant WUA policy. Error = 0x80070002. WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Enabling WUA Managed server policy to use server: https://(Name.domain of our SCCM SUP):8531 WUAHandler 13/04/2015 16:15:02 2488
(0x09B8)
Waiting for 2 mins for Group Policy to notify of WUA policy change... WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Unable to read existing WUA resultant policy. Error = 0x80070002. WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)
Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)
Failed to Add Update Source for WUAgent of type (2) and id ({FC358571-80C5-4EAA-8A33-F79AD4C14785}). Error = 0x87d00692. WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)

ILife '11 fails to completely install on OS X Snow 10.6.7

@Hello
Mac-mini 8GB running OS X Server 10.6.7 with latest updates. Purchased iLife'11 same time as mac-mini along with other iWork and vFusion,etc. Unable to install iLife '11!? Attempted installation more than a few times, but installation nears completion and then cries "Failed to install" - uuuggghhh! Aware of some type of update for iLife '11 for 10.6.x; made sure it was amongst latest updates. Still no joy on on iLife '11 install!
Pretty sure there is an explanation for this installation behavior and there exist some solid fix!? Just point me in the correct direction!!
-- Gone completely Mac!!!

It could be a damage disk. Others who had that problem were able to get around it by creating a disk image of the iLife 11 disk with Disk Utility. They then installed from that. It might work for you.
OT

Dreamweaver CC 2014.1 Fails to Complete Install

Hi all
I have tried several times to install Dreamweaver CC 2014.1 from Creative Cloud app, and it always fails at 84% with the same error message pasted below. It says it needs admin rights, but I have admin rights, and I even right clicked on Creative Cloud app shortcut and selected "Run as Administrator". I have Dreamweaver CC already installed, but can not install Dreamweaver CC 2014.1.
Here's a screenshot:
ERROR MESSAGE DF024:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DF024 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
----------- Payload: Adobe Dreamweaver CC 2014.1 15.0.0.0 {7F823F8E-4348-11E4-8BF8-81763C49AA32} -----------
ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{7F823F8E-4348-11E4-8BF8-81763C49AA32}\_50_5c801a1503ab2 d063aab98d06fd56f55" to "C:\Program Files\Adobe\Adobe Dreamweaver CC 2014.1\NetIO.dll" Error 1392 The file or directory is corrupted and unreadable.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 53)
Thanks in advance

Please try this sequense.
1. Uninstalled Dreamweaver CC and Dremaweaver CC 2014 both from Control Panel > programs > Uninstall a Program .
2. Once uninstalled > download adobe cleaner tool from the link below and make sure all versions of DW are uninstalled from your machine.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 (Look for section 3 : Run the Adobe CC cleaner tool )
3. Once removed sign out of creative cloud application and sign in again. Sign in, Sign out | Creative Cloud desktop app
4. Now try to install Dreamweaver CC 2014.1.
5. If the issue still persist please create a new admin user profile and try to install it in new user profile.
6. In case of No luck with the steps above I would advise you to contact our Support team via chat or phone/
Contact Customer Care
Regards
Vivek

HP 2000 notebook Recovery fails after complete install

I purchased the recovery disks for 64 bit Win 8 From HP and after loading the three recovery disks (100%) it asks for the forth disk then says recovery has failed. I have teh .CAB file saved but dont know how to submit this to HP support. The error log saves to the window file structure. The details:Detect some error during PININST_BBV.Check c:\system.sav\logs\burnbootwarn.logor, check c:\system.sav\logs\burnbootmerge.log How can I get HP support to help me resolve this?

I spent 2.5 hours on the phone with HP tech support last . Starting with changing the Bios date to 6/1/2006 and then started the recovery (3rd) time. All look great unitl midnight when i went to bed . It had loaded and ejected all 4 disks. THE software installation was running. This mornig I had a Recovery failed message. Waiting fo rTech support to call me back (They are late). I can't do a refresh of windows 8 because the recovery has formatted the hard drive and you cannot get to an options screen. We havent reloaded any BIOS settings yet. I am still waiting for tech support to call Case # 3017584806

Installing ECC6 EHP4 ready - Oracle Client extraction

Hi,
I am installing an ECC6 EHP4 ready system.
Our server has multuple systems running on the server with Oracle Database and oracle client is already available.
During instalation, sapinst always tries to extract Oracle client and we dont want this, so we always rename the OCL10264.SAR file to OCL10264.SAR.OLD or something like that and the sapinst step fails.
Then we just modify the keydb.xml file and make the step - OK.
I dont see this option now with ECC6+EHP4 installation.
The Keydb.xml looks different too.
Does anyone know how I can ignore this step and continue with this new release?
Even though I see a lot of improvements in SAPINST with the new release, it would be bad if this step or any other step cannot be ignored anymore.
Please suggest
Suhail

Problem solved....during the initial stages of the installation while it gathers all information, it checks and makes sure that the client software is available but doesnt extract it....i made it available and the installation went ahead....it extract it later before the database installation and at that time I removed it and when the installation failed, I was able to modify the keydb.xml file.
Regards
Cyrus

Which oracle client works with both Oracle 11.2.0.2 and BizTalk 2006 R2

Hi there
My Oracle11.2.0.2 is installed on linux server. My Biztalk2006R2 is installed on Windows Server 2003 R2 x64. I have already installed BizTalk Adapter for Oracle on the Biztalk server and now require to install Oracle Client to make Biztalk able to retrieve data from Oracle11.2.0.2 using the oracle client.
From the following link,
http://msdn.microsoft.com/en-us/library/aa559822%28v=BTS.20%29.aspx
I came to know that the only oracle clients compatible with Biztalk adapter for oracle are as below:
1) Oracle client 8i
2) oracle client 9i
3) oracle client 10i
Now I need to install an oracle client on biztalk server in order to make biztalk talk to oracle and retrieve data from it.
Question1: which of the above clients should i install on biztalk server that is compatible with both Oracle11.2.0.2 as well as Biztalk server 2006 R2?
Question2: How to install and configure this client to make it work correctly?
Please help.. thanks.
Edited by: manibest on 19-Dec-2012 03:27
Edited by: manibest on 19-Dec-2012 03:27

The Biztalk Adapter interface with Oracle software has information, requirements per referenced document that does not make sense.
E.g. "10i" does not exist and the requirement "Oracle ODBC driver 9.2.0.5.4" means that only 9.2 Client can be used. (Mixing parts from one Database Client product version with another version is not allowed/supported/certified.)
Btw, does that machine happen to have Itanium hardware? (probably no, since you stated x64)
For Oracle's OS requirements, 2003 was certified with/from 9.2.0.3 (and likely also terminal patch set version 9.2.0.8). Not sure about Server 2003 R2, 32 or 64-bit. I'm pretty sure 10.2 was certified on 2003 R2, but the note likely refers to 10.1 versions (before it was known it would be labeled 10g, g for grid replacing the i ).
This FAQ may have some more information: http://www.oracle.com/technetwork/database/windows/faq-100614.html
For Oracle client - server interoperability and certification, there's a support matrix on MOS. See doc id 207303.1.
It seems 9.2 is supported on the wire to operate with 11.2 server, but Client with at least patch set 9.2.0.4 is required.
So, I guess best bet is to find updated requirements.
If you manage to get hold of 9.2.0.5, after verifying that 2003 R2 is ok, then it looks like the puzzle could be put together for a complete picture.
For ease of install, take a look at the Instant Client. (However, there's no 9.2 IC, that type of client install came later)
http://www.oracle.com/technetwork/database/features/instant-client/index-097480.html
Edit;
some corrections, specially about 9.2 version
Edited by: orafad on Dec 19, 2012 10:58 PM

Oracle Clients on Linux only

I just want to have the Oracle clients (sqlplus, sqlload, sql*net
etc) installed on a linux box. Where can I download them? I don't
want to download that huge whole server file.
Thanks!
dp
null

I've installed Oracle Client 8.1.7 on a Linux machine. I want to connect to a Database on a Oracle Server, which is installed on a Win NT machine.
During installation I gave the name, host, port(1521) of a database, which was promptly registerd in ORACLE_HOME/network/admin/tnsnames.ora file.
When I try connecting to the database, I get the TNS Error :
could not resolve service name
What is the problem? Even tnsping on the host gives a similar message :
Failed to resolve ......
Please help....thanx....
null can you do a ping (not tnsping) on your windows machine from Linux?
If you copy the same tnsnames.ora entry over to your windows machine and try connecting to your database
using Windows client (using this copied tnsnames.ora entry), can you connect sucessfully or you get the
same error message again?

Oracle Client 64-bit and Oracle Client 32-bit on the same server

Hi,
I have a Windows 2008 server 64-bit with Oracle Client 64-bit and Oracle Client 32-bit installed on different directories (D:\Oracle and D:\Oracle32)
Is it possible to define for certain applications to use the TNSNAMES entry from the 64-bit Oracle Client
and for other applications to use the TNSNAMES entry from the 32-bit Oracle Client
Once I installed the Oracle Client 32-bit (Oracle Client 64-bit version was already installed) and restarted the server I performed a TNSPING and it defaulted to the Oracle Client 32-bit installation path
Thanks,
Barry

Hello,
When you install a new client on a server, it will update the PATH variable, and add the ORACLE_HOME\bin path to it, at the first place. That explains why the tnsping use the last installed ORACLE_HOME.
What you can do if you want only to change the default path to the tnsnames is to set the environment variable TNS_ADMIN to the path where the tnsnames you want to use is located. You can modify this variable in your application if you want to use another tnsnames.
If you want switch from 32 bits to 64 bits client, then you have to modify the PATH variable.
Hope this will help.
Best regards,
Sylvie

Using TOAD 7.6.0.11 with Oracle Client 10g (Release 2)

So far, I've been using Oracle Client 9i.
I decided to install Oracle Client 10g and thus copied 9i's tnsnames.ora over to 10g. The problem is when I fire up TOAD. It doesn't show the 10g client in the drop down menu nor in the Oracle Home Editor button. It only shows 9i (i.e., ias_home)
How do I make 10g visible to TOAD?

Use SQL Developer or try to post it in other forum...<br>
<br>
Nicolas.

Is Oracle Client software must in Sql Server 2005 Box to connect ORACLE

We need to connect ORACLE from SqlServer 2005
1. We would like to know is Oracle Client Software MUST needed to be installed in SqlServer 2005 to connect ORACLE.
2. Do we have any other means?
3. Will Oracle OLE DB Provider for Oracle help us in establishing Linked Server to ORACLE

Probably late in the day for this but
The workbench cannot handle SS2K5 directly at the moment. However as long as no new SS2K5 functionality has been used with a few tweaks this can be achieved.
1. Firstly use the SS2K offline capture scripts to build the directories for the database(s) you want to capture.
2 Secondly edit
(a) SS2K_SYSLOGINS.dat and take out long SS2K5 user records
(b) SS2K_SYSINDEXES.dat change FIRST ( forth column) to a value (say hex 1).
(c) SS2K_SYSUSERS.dat change ROLES (sixth column) to a value (say hex 1).
This should now load into the workbench. If it does not check the error.log file in <OMWB HOME>\log.

ORA-12154 in new oracle client installation (ASP applications)

Hello,
I've got a test server with an Oracle 10.2 client that has some web services running on it. They connect using the oracle client to a database in another server. Untill this morning they were working great but then I has some trouble and I had to reinstall the Oracle client again. Now I have installed once any Web Service tries to open a connection to my oracle database I get an ORA-12154.
I've tried to run (in my test server) a simple console application that opens a connection to the same database with the same connectionstring and queries a table and it works great, so I think that there might be some problem with asp.net applications or something like that....
Does somebody know how can I solve that??
Thanks in advance!

after you reinstall Oracle client, run netca to configure your tnsnames again. Or if you have copy of old tnsnames.ora file put under new client ORACLE_HOME/network/admin

Unable to execute perl.exe in Oracle client from command prompt

I am installing OUBI 2.3.2 version in windows 2008 server. For that I have installed Oracle Client 11.2.0.2
While installing Oracle Utilities Application Framework Application Server in command prompt i am getting the error
Unable to find file <Dir>\Client\product\11.2.0\client_1\perl\bin\perl\bin\perl.exe
I have set the path in PATH Variable and I have tried manully giving the path and still getting the problem..
Mohan

In which context do you use OUBI ?
Which installation procedure do you use and on which step do you have a problem ?
Cheers
Nico

Oracle Client 8.17 fails to complete install

Similar Messages

Maybe you are looking for