Oracle client Download for 9208 windows

Hi .
Kindly help me with link to download oracle client for 9208 version for Windows 2000 32 bit.
Regards
Vijay

Refer readme for patch 4547809 on MOS.
Section "12 Patch Set Components " - table entry "Oracle Client required support files " confirms that this patch can be applied on 9.2.0.x client installation.
There is no sentence indicating the same in 9.2.0.8 readme (which is there in any 10.2.0.x readme).
<quote>
You can apply the Oracle Database release 10.2.0.4 patch set to the following Oracle Database 10g release 2 installations
Oracle Database Client
<quote>

Similar Messages

Oracle Client Download for Windows XP

Is it possible to get the Oracle Client download for Windows XP?
Thanks,
Cherie Machler

http://download.oracle.com
http://lmgtfy.com/?q=How+to+Oracle+Client+Download+for+Windows+XP

Oracle client software supported on Windows 7 for Oracle 10

Hi
I am looking for looking to upgrade the Oracle client software (not instant client) to find a version that support Windows 7. We currently use 10.2.0 On XP.
I can only find version 11g downloads but our database server is 10
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
I'm getting the impression Oracle intentionally does not allow older downloads even though they are still supported.
Where can I get a Oracle client software supported on Windows 7 for Oracle 10.
thanks
Paul

952029 wrote:
Hi
I am looking for looking to upgrade the Oracle client software (not instant client) to find a version that support Windows 7. We currently use 10.2.0 On XP.
I can only find version 11g downloads but our database server is 10Oracle 11 client will work just fine with a 10g database. However, 10g is currently only on "sustaining" support. You are WAAY overdue to upgrade the db.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
I'm getting the impression Oracle intentionally does not allow older downloads even though they are still supported. You need to look at the level of "supported" for 10g. A software company can't support old versions forever, and by limiting the download of those old versions, they limit the number of new support calls for them.
>
Where can I get a Oracle client software supported on Windows 7 for Oracle 10.
again, since you are concerned with the client software, you should just get the 11g client. It will work fine with your 10g database.
thanks
Paul

Where can I find oracle 9i download for RHEL 5.6?

Hello all,
do you know where can I find oracle 9i download for RHEL 5.6? I can't find it anywhere.
Thanks in advance.

024c8465-a0ba-4c31-8631-545e52a60961 wrote:
Hello all,
do you know where can I find oracle 9i download for RHEL 5.6? I can't find it anywhere.
Thanks in advance.
My Oracle Support ... and only if you have a paid-up support contract. Actually, I'm not sure 9i would be available even then. 10g is only available to those with a paid-up sustaining support contract. 9i is so old (hasn't been supported in this millennium) I wouldn't be surprised it is not available at any price. Further, I doubt it was ever certified for RHEL 5. Hard to tell since the documentation isn't even available .....
Just out of curiosity, why would you be needing such an antique?
On another note, please edit your profile to give yourself a recognizable name.

Which version of Flash Player do I need to download for a Windows Vista 64bit system?

HELP!!!!
I have looked and looked on the webside for which version of Flash Player I should download for my Windows Vista 64 bit system!

Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Installing Latest Oracle Client & ODT for Windows 7 64-bit

I have a Windows 7 64-bit. I would think that using 32-bit Java, 32-bit Oracle Client and 32-bit ODAC would work just fine on this operating system. However, I had no luck getting it to run. Here is what I did and a few reasons why I prefer to never work with Oracle products:
Installed 32-bit JDK/JRE (1.6 Update 25)
Installed 32-bit Oracle Client (11g R2) Home 1
Tested connectivity from SQL Developer successfully
Installed 32-bit ODT (11g R3) to Home 1 (installer noted upgrades and new installs)
Failed connectivity from all things windows (ODBC, ADO, ADO.Net)
Uninstalled 32-bit ODT
Failed to uninstall 32-bit Oracle Client Home 1 (oraparam.ini file missing among other issues)
Installed 32-bit Oracle Client (11g R2) Home 2
Failed to uninstall 32-bit Oracle Client Home 1 (told to use deinstall tool)
Failed to uninstall 32-bit Oracle Client Home 2 (told to use deinstall tool)
Failed to run uninstall tool in Home 1 (told to download standalone deinstall tool)
Uninstalled 32-bit Oracle Client Home 2 (completed successfuly with errors - seriously?)
Uninstalled 32-bit Oracle Client Home 1 (completed successfully, but couldn't delete folder)
Oracle.DataAccess and Oracle.Web are still installed in GAC. Uninstall attempts fail (access denied)
Installed 32-bit Oracle Client (11g R2) Home 1
Tested connectivity from SQL Developer successfully
Tested connectivity from .Net 3.5 successfully (using 32-bit 2.0 dll)
Tested connectivity from .Net 4.0 successfully (using 32-bit 2.0 dll)
Does anyone have any suggestions on getting Oracle Data Tools for Windows to work before I try that again?

I realize ODT uses ODP, but installing release 3 upgraded the .Net 2.0 ODP DLLs (which were installed from the Oracle Client 11g Release 2 install) and added the .Net 4.0 DLLs. After that install everything stopped working from Windows land and then it took the better part of two hours to get it back to what it looked like prior to the install. The other thing weird thing I noticed is that although Oracle.DataAccess is registered in the 2.0 GAC I cannot add a reference that way using VS2010. I have to manually add a reference to the file path. Although it still appears I do not have to have the assembly copied locally to run, so the GAC registration seems to be working in that regard.

Could not find main class program will exit error while installing Oracle Client 32 bit on windows 7 32 bit OS?

Hi Experts,
When I am installing Oracle client 32 bit software on Windows 7 32 bit I am getting error as "could not find main class program will exit"
I have tried installing latest Java software 7 also JDK 1.6.0_34 still I am getting the same problem below is my " oraparam.ini " details
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.xml
LICENSE_LOCATION=
BOOTSTRAP_COMPS="oracle.swd.oui:11.1.0.6.0,oracle.swd.oui.core:11.1.0.6.0,oracle.jdk:1.5.0.1.1"
JRE_SCRATCH_LOC=jdk/jre
JRE_MEMORY_OPTIONS=" -mx96m"
DEFAULT_HOME_LOCATION=product\11.1.0\client
DEFAULT_HOME_NAME=OraClient11g_home
NO_BROWSE=/net
NLS_ENABLED=TRUE
BOOTSTRAP=TRUE
EXT_JLIB=../stage/ext/jlib
OUI_VERSION=11.1.0.6.0
## JRE_VERSION is only for Windows. This is to copy accessbridge dlls
JRE_VERSION=1.4.2
ACCESS_DIR=../install/access
#SHOW_HOSTNAME=ALWAYS_SHOW shows the hostname panel always
#SHOW_HOSTNAME=NEVER_SHOW does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW shows the hostname panel on condition
SHOW_HOSTNAME=NEVER_SHOW
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
SILENT_VARIABLE_VALIDATION=TRUE
[Generic Prereqs]
MIN_DISPLAY_COLORS=256
[IMAGES]
FILE1=images/billboards.gif
LICENSE_LOCATION=license.txt

Duplicates of the other two times you asked this question:
https://forums.oracle.com/thread/2559093
https://forums.oracle.com/thread/2558027
(and this time, your question does not appear to have anything to do with this particular forum space, either)
Duplicate is locked.
Do not EVER multi--post. That is extremely bad forum etiquette.

Installation of Oracle Client 32 bit on Windows 64 bit

Hi ,
I'm trying to install the 32 bit Oracle client (release 11.2.0) on a Windows server with 64 bit (Microsoft Windows Server 2008 R2 Standard, Service Pack 1).
It's my understanding that this is supported and should work. However, the 64 bit Oracle client (release 11.2.0) is already installed on the server.
We need the 32 bit client since an older application requires this.
The GUI for the install of the client starts fine - but when the step "Finish installation" the GUI suddenly disappeares. The logfile of the installation ends
with
INFO: Setting the value for INSTALL_TYPE variable
INFO: Variable "INSTALL_TYPE" wird auf "InstantClient" festgelegt. Der Wert wurde von der Befehlszeile empfangen.
INFO: adding the variable oracle_install_NoMigration to command line args table
INFO: adding the variable oracle_install_RACInstall to command line args table
INFO: adding the variable oracle_install_WindowsSystemDirectory to command line args table
INFO: Update the State machine to STATE_INIT_SESSION
INFO: Creating & Initializing the Session Interface Manager
INFO: Calling OiicInstallAPISession's prepareForInstallOperations
INFO: Do the iterator execution till Summary
INFO: Initialisieren des Installationsbestands
INFO: Einrichten des Installationsbestands
I'm executing the installation as a local admin - I've tried the installation with setting the compatibility mode to Windows 2000. No success at all :-(
Did I get it wrong that ths 32 bit client is certified with this windows version? Does anybody have experience with the same situation?
Any help will be appreciated!
Rgds
Jan

Are you using separate ORACLE_BASE directories ?
Oracle&reg; Database
HTH
Srini

Oracle Client 11g R2 in Windows 7 connecting a RAC server

I have the following setup in my laptop
Windows 7
Oracle Client 11g R2
I'm trying to connect "SQL plus" to a load balanced server (RAC) configured as below
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for HPUX: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
The problem is, the connection creation is not consistent. It is throwing the following error randomly.
ORA-12545: Connect failed because target host or object does not exist
I'm able connect to another server (not RAC) without any issues. Even TOAD is giving the same error. After few tries, it works.
Anyone facing the same problem, got any solution???
Thanks
Edited by: user3918865 on Oct 7, 2010 4:14 AM

Bruno Palma wrote:
Hi all.
I've done all the checklists suggested but I'm still getting the error. The problem is not with the network and the servers cos I'm working in a Company and when I had Windows XP SP 3 and Oracle Client 10gR2 all was working fine. I'm with Windows 7 Professional 64-bit now. I'm almost sure the problem is with Windows 7 x Oracle Client but it's hard to figure out what's going on. Does anyone have idea what could it be ??I would generate a client side sqlnet trace, then go on a fishing expedition. There's a lot of dense stuff in a full trace, but if you don't panic and just try to make sense of what you can, you'll probably flush it out.
To enable the trace, go to your sqlnet.ora file and add these lines:
TRACE_FILE_CLIENT=clientsqlnet.trc
TRACE_DIRECTORY_CLIENT=C:\app\oracle\product\11.2.0\client_1\network\trace
#TRACE_LEVEL_CLIENT=off
#TRACE_LEVEL_CLIENT=user
#TRACE_LEVEL_CLIENT=admin
TRACE_LEVEL_CLIENT=support
DIAG_ADR_ENABLED = off

Oracle Client 10g/11g on Windows 2008, Itanium

Hi, All!
I need to install Oracle Client on test Windows 2008 Server, based on Itanium processors.
11g client is preferred, and 10g client at least.
I know, that Win2008 is not supported yet for Oracle Database, but, may be, there are way to install it on my own risk (its test server).

Sorry for coming back late on this thread... I have installed Oracle 11g on Windows 2008 but it was a Xeon processor not Itanium.
On a side note, am I wrong in saying Oracle should not be bothered about the underlying hardware (whether Intel or AMD or any proprietary hardware)? It is then the responsibility of the operating system to ensure that the product behavio(u)r is same across platforms.

Oracle Client 11g R2 on windows 7

Hello All,
I installed Oracle 11g R2 Client on windows 7.
My OS is windows 7 professional 64 bit.
I installed Oracle Client 32 bit, so i will be able to use my 32 bit applications (TOAD, PL/SQL Developer ...)
every thing is good. but recently i discovered that in the regedit under : HKEY_LOCAL_MACHINE\SOFTWARE there is no oracle key name. so i am not able to change my NLS_LANG .....
Your Help pls.
Regards,

I'm not familiar with the structures under Windows 7, but simply do a registry search for NLS_LANG. If it is set it must be found.
Werner

Where are the Sybase ASE 15.7 client downloads for 64bit?

Have spend a lot of time finding the latest and greatest downloads of the Sybase ASE 15.7 Client for 64bit. The one I could find (Refresh version (Which version is this anyway?)). But i need also the EBF/SP 's
Please advice

Hi,
You can find the downloads at SAP service market place.
SAP Service Marketplace - Home
Click SAP Support Portal (middle of the screen)
Click Software Downloads (grey top menu bar)
Click Support Packages and Patches (middle of the screen under A-Z index)
Select 'S'
Select 'SDK for SAP ASE'
This is the location for the latest downloads.
Older downloads can be found in 'SY Software Developer Kit'
I believe refresh is the PC Client that includes SDK and GUI tools for windows.
Go back to the A-Z letter screen.
Select 'Installation and Upgrades'
This can be found under 'A'
Click 'SAP Adaptive Server Enterprise'
Refresh is around SP100 I believe.
Not 100% on the exact version, but this is one of the last PC Client downloads as it is being EOL.
Sybase Central that came in PC Client is EOL.
DBISQL / interactive SQL is being moved to the SDK in 16.x.
Regards,
Ryan

Is it necessary to have oracle client installed for remote access thru' jdbc type2 driver?

If I want to use oracle oci type 4 driver, do I need to install oracle
client?
or is it sufficient to put dll in classpath and classes12.zip in
classpath.
I can then specify in jdbc url the host:port:sid and not use the alias
from tnsnames.ora
I will be connecting to remote oracle database ofcourse.
Komal.

you need the Oracle client libraries installed.
And the easiest way to do this is to make an oracle client installation.
the DLL files should be in your PATH, not classpath.
Filip
~
Namaste - I bow to the divine in you
~
Filip Hanik
Software Architect
[email protected]
www.filip.net
"komal mangtani" <[email protected]> wrote in message
news:[email protected]..
sorry for the typo, I meant type 2 driver
komal mangtani wrote:
If I want to use oracle oci type 4 driver, do I need to install oracle
client?
or is it sufficient to put dll in classpath and classes12.zip in
classpath.
I can then specify in jdbc url the host:port:sid and not use the alias
from tnsnames.ora
I will be connecting to remote oracle database ofcourse.
Komal.

Oracle client required for Essbase Installation

Hi
I installed Essbase server and EAS server with foundation services in one Windows Machine.
My RDBMS (Oracle) Is installed on a different Machine.
Do i need to install Oracle client on my Essbase machine to configure with RDBMS? or Oracle Client installation is not required to configure with RDBMS?
Thank you.

You don't need the Oracle client if you want to configure the foundation database as it uses JDBC drivers which are included in the foundation installation.
The Oracle client is useful if you want to set up Oracle ODBC connections to be used with essbase SQL data loads.
Cheers
John
http://john-goodwin.blogspot.com/

Oracle Client 11g 32bit on Windows 7 64Bit, does not show Norwgian Chars?

our company develop a program that communicate with Oracle Database though Oracle Client.
to use the program the user needs to install oracle client in as a runtime.
now some of our clients has some problem with the Norwegian chars! it shows as a question mark (?)
all the Norwegian chars (ø,æ and å) in the program that comes from the database replaces by (?)
I did many research but yet no luck! and ideas (I would love to welcome few so I can test them all)
cheers
Edited by: SJari on Jun 15, 2011 2:32 AM

Which tool are you using to query the data?
What is the NLS setting at the client side?
I would recommend a read through the Globalization support guide.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/toc.htm

Oracle client Download for 9208 windows

Similar Messages

Maybe you are looking for