Oracle client for an AIX machine

I need the client oracle 9.2.0.1 for an AIX machine.
But in the download page I don't see any link for the oracle client. There is only this
link:
http://www.oracle.com/technology/software/products/oracle9i/htdocs/aixsoft.html
Thera are 4 different download:
server_9201_AIX64_Disk1.cpio.gz (523,867,845 bytes)
server_9201_AIX64_Disk2.cpio.gz (629,432,127 bytes)
server_9201_AIX64_Disk3.cpio.gz (620,873,250 bytes)
server_9201_AIX64_Disk4.cpio.gz (221,310,704 bytes)
Is the client there?

Oracle doesn't offer the client as a separate download.
You need to download all 4 files (can not help it),
fire up the installer, and choose a Client install.
Hth
Sybrand Bakker
Senior Oracle DBA

Similar Messages

  • Oracle client for ancient AIX 4.2 on PowerPC

    Can someone point me to the Oracle client software for an ancient AIX (4.2.1) system? The target database is 10.2.0.3 on Linux.
    The ability to connect to the current DB from the old server would greatly facilitate the migration. Full or instant client, doesn't matter as long as I can connect.
    If there are other alternatives I would be open to suggestions.
    Thanks in advance.

    As your db is on 10203 your client has to be 9204 or later
    From what I remember 9201 base itself was released on AIX5L

  • Oracle Client for DOS

    Hi!
    Where can I download Oracle Client for DOS to connect to Oracle Server version 7, 8, 9 or 10g?
    Thank you for any advice.
    Igor Shulgin
    Chelyabinsk, JSC Uralsvyazinform

    Oracle hasn't produced a DOS client at least in the past 6 years. I'm not aware of a DOS client that has ever been produced, but I can't say that for sure. If there was a DOS client in the Oracle 6 or 7 days, getting it would be a challenge-- you'd have to contact Oracle support to see if that have an archive that goes back that far. Most likely, you'd have to find someone who still had the old media. Even if you did, though, an Oracle 6 or 7 client cannot connect to an Oracle 9i or 10g database. An Oracle 6 client can't even connect to an Oracle 8i database.
    In other words, you probably can't connect from a DOS machine. If you install Windows, you can use the Windows client from a DOS window.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Oracle client for CA Erwin data modeler

    Does anyone know how to install and configure oracle client for Erwin data modeler?
    CA tech support says check with oracle

    >
    I need some help understanding what client means.
    >
    Client is any server that connects to a database. I am assuming that CA will be installed on a Windows XP machine and it will connect to a remote database on another server. I am assuming since you have not provided any details.
    >
    I can upgrade to 11g database. No problem
    >
    OK - not sure what this has to do with your issue.
    >
    I am looking for the oracle software that connects to CA Erwin
    >
    See my links posted above
    >
    I am not looking for Oracle database install
    >
    The client install does not install a database - it installs the necessary components needed to connect to a remote Oracle database.
    >
    Please be more specific.
    >
    More specific with what ? The more lucid details your provide, the better the quality of the responses on these forums.
    HTH
    Srini

  • Where can i find an oracle CLIENT for win98??

    I need an oracle client for win98 to access a 9i database, where
    can i find it?
    Best Regards
    Erik Rangel de Oliveira

    any oracle 8i client or oracle 8 client can connect to oracle 9i
    database if that helps.
    The clients can be obtained from the technet site.

  • Oracle client for SCO Unix

    Hi,
    Where I can't download oracle client for SCO Unix ?
    Thanks.

    You're right. You can't download Oracle client for SCO Unix.
    I'm not sure what you mean by "SCO Unix", but if you go to MetaLink and look at the Certification matrix, you see two different listings that make reference to SCO:
    Unixware (SCO) - Terminal Oracle release for this platform was 8.1.7.
    Intel SCO Open Unix 8 with LKP - Terminal Oracle release for this platform was 9.0.1.
    So, I think you're out of luck.
    -Mark

  • Which oracle client for aix 6 xi31 sp3?

    I need oracle client 10.2 for a installation of xi31 sp3 on aix 6 with an oracle 11g db in order for ldap to work properly.
    My apologies for my lack of DB (oracle) experience,  however, can someone please tell me which file I need for this and the associated link to download it?

    Hi,
       Please explain in more details what do you mean "which files"?
       If you mean getting the physical files, then :
          To download BOE XI 3.1 with SP3, you need to log onto the SAP Support Portal (aka: Service Market Place) - http://service.sap.com/
          The Oracle D/B and the Oracle client will need to come from Oracle website. You will need to check with Oracle to see how you can get your hands on the files.
          As for AIX 6.1, I assumed that should already been setup since you quoted that in your last note.
    Ken

  • Oracle client for siebel server configuration

    Hi ,
    To install siebel as prerequisite we are installing oracle client on the siebel server machine. Our client is providing ldap.ora instead of tnsnames.ora file. Through out my earlier projects we used to have tnsnames.ora entry which is having connection details of database. CAn you Please confirm instead of having tnsnames.ora , can we use ldap .ora which is having Db server details in it. Have you ever seen other clients using this way without tnsnames.ora for siebel installation.
    Can you please provide any documentation which confirms that we must need tnsnames.ora, not ldap.ora.
    Thanks much in advance.

    Hi,
    Have a look at these documents
    http://docs.oracle.com/cd/E11882_01/network.112/e10835/ldap.htm#NETRF011
    Is It Possible To Use Ldap.Ora On The Client To Get Tnsname Entries From An Oid? (Doc ID 461151.1)
    Using TNS_ADMIN with LDAP.ORA and Net Manager (Doc ID 189627.1)
    What Is The Search Order For The LDAP.ORA File ? (Doc ID 363283.1)
    Thanks,
    Krishna

  • Oracle client install in local machine having windows visa home premium

    Hi,
    I need to install oracle client (oracle data base is 10g) in local machine having windows vista home premium. Can anyone give me step by step instruction of how to do that asap. I will really appreciate your help.
    Thanks
    Valli

    Oracle doesn't certify on the "home" editions of Windows, even for the client.

  • Oracle client for EPM Services?

    John,
    Do i need to install Orcale client ? In order to start the windows EPM services.....
    Thanks.

    Hi,
    I think if you are using Oracle as the repository for EPMA then you will have to install the oracle client on the machine that has the EPMA dimension server installed.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • 10.1.0.3 Oracle client for SPARC (64-bit) not on Metalink

    All,
    I cannot find the 10.1.0.3 Oracle client on Metalink account for SPARC. Is this available anywhere?

    You have to download the base version also, not only patch set!
    To get the patch set:
    click tab Patches & Updates, then click link "Quick links to latest ...".
    Now choose Oracle Database, scroll down to Solaris SPARC 64bit -> patch set versions 10.1.0.3 to 10.1.0.5.
    As far as I know, I dont deal with Client installs much, you can upgrade both Client and Database with the "Database" patch sets.
    Message was edited by:
    orafad

  • Oracle Client for Windows 2008 R2 server to connect to Oracle database 9iR2

    Hi,
    We are running Oracle 9.2.0.7 on Sun solaris (64 Bit) 5.10 and trying to install client on new Windows 2008 R2 (64 - bit) server. (Before this 2008 R2 we were using Windows 2003 32 bit and 9iR2 client was working great.) I can't install 9iR2 clinet and I tried installing 10gR1, 10gR2 and 11gR1 but none of them worked. It is only allowing me to install 11gR2. When I installed 11gR2 client I am getting some 'overflow exception on an arithmetic operation' error.
    1.) Do I have any choice for client installation or only 11gR2?
    2.) Any solution for overflow error?
    Thanks,
    -H

    May I know the reason why ODBC driver is not include in option like Runtime?Oracle software utilizes SQL*Net (not ODBC) to connect to Oracle RDBMS.
    ODBC is not required by Oracle client software to connect to Oracle RDBMS.

  • Requires Oracle client for windows server 2008 Version 6.1

    Hello
    I am using Windows 2008 Server Version 6.1 (64 Bit). I want to install Oracle client on this server. Which version is suitable for my requirement and from where i can download it.
    Thanks
    Sijo Thomas

    user12248518 wrote:
    I am in the same boat, I have downloaded what was told to download and it doesn't install it keeps saying "Unknown" 3 times in a popup when I try to install.Oracle has roughly 3,000 products. You downloaded 'what you were told' - one of those 3,000 products. And it didn't work.
    The amount of information you provide is surprisingly sparse, assuming you want assistance.
    So - if you want help, you might wnat to provide some information:
    - the operating system (including edition, and major service pack if WIndows, or distro && major/minor release and kernel if *nix)
    - the URL froim which you downloaded
    - the country yuo are in (since ORacle could redirect to several sitres based on region)
    - the command or executable, including directory path, you run or double-click on
    - the 'exact' error message, or if a generic one like "Unknown", perhaps a screen shot to convince us that it is actually such a generic message
    It's just a suggestion, but answering in such detail actually tells us you are serious about resolving the issue - you put in effort, and that may convince us to return some effort.

  • Is there any Oracle client for RedHat Linux

    Hi,
    I m searching for the Oracle9i client for RedHat linux. Is it available free. If yes please tell the site name.
    thanx
    -biyat

    Which oracle version u have for Solaris intel
    [email protected]
    Hi,
    We have an oracle server (8i) running on Windows NT. I need a oracle client on Solaris Intel 8 to connect to the Oracle server running on NT.
    Thanks
    --John

  • Oracle client for Itanium2 CPU (Montvale)

    We found an oracle client software which works on Montesito CPU (previous Itanium2 CPU). But this version of the software does not support Windows Server 2008 Itanium Edition.
    We need oracle Client which works on Intel Itanium2 (Montvale) CPU and Windows Server 2008 Itanium Edition(x64).
    Would you please inform me how can i get the latest Oracle Client software which supports Intel Itanium2-Montvale CPU?
    Thanks for your help.
    Best Regards.

    If you didn't find one on otn, than I'm afraid you won't find one...
    I only found the ones certified for Win Server 2003 Itanium, but Server 2008 seems only to be certified for x86...
    You could hope that Server 2003 client works under Server 2008 (I'd give that a go), but that's not certified...
    regards

Maybe you are looking for