Oracle Client for Windows 2008 R2 server to connect to Oracle database 9iR2

Hi,
We are running Oracle 9.2.0.7 on Sun solaris (64 Bit) 5.10 and trying to install client on new Windows 2008 R2 (64 - bit) server. (Before this 2008 R2 we were using Windows 2003 32 bit and 9iR2 client was working great.) I can't install 9iR2 clinet and I tried installing 10gR1, 10gR2 and 11gR1 but none of them worked. It is only allowing me to install 11gR2. When I installed 11gR2 client I am getting some 'overflow exception on an arithmetic operation' error.
1.) Do I have any choice for client installation or only 11gR2?
2.) Any solution for overflow error?
Thanks,
-H

May I know the reason why ODBC driver is not include in option like Runtime?Oracle software utilizes SQL*Net (not ODBC) to connect to Oracle RDBMS.
ODBC is not required by Oracle client software to connect to Oracle RDBMS.

Similar Messages

Oracle Client for Windows 2008 R2

is there a 10g or 11g cleint available for Windows 2008 R2? The latest Win64 or Windows 2008 clients all give me an error that saus it supports versions up to 6.0 and I have version 6.1

There is a work around that can help to install 11g release 1 on windows 2008 R2
The installer can be executed in compatability mode by right clicking on setup.exe and select "Troubleshoot compatibility" then "Troubleshoot Program" then check option "The program worked in earlier versions of windows......." then choose "Windows Server 2003 (with service pack 1)" and in the last step click "start the program" button.
hope tihs will start installing Oracle 11g Release 1 on Windows Server 2008

Is it appropriate to apply the hardening settings for Windows 2008 R2 server to Windows 2008 server?

We would like to adopt the hardening recommendation for Windows 2008 R2 from CIS to all our DC servers. However, but then we found some of our DC in remote sites are Windows 2008 server only.
Is the hardening settings from Windows 2008 R2 from CIS also applicable to Windows 2008 DC?
Thanks for your attention.

Yes, this should be fine. Hardening only specific security settings, registry keys etc and there's not much difference if you consider hardening.
Just for reference, here's the difference between 2008 and R2 :
http://technet.microsoft.com/en-us/library/dd391932(WS.10).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Cisco Jabber Client for Windows 9.7 Can't Connect to Other IPSec VPN Clients Over Clustered ASAs

Environment:
2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
Both ASAs are at version 8.4(5)6
IPSec VPN Client version: 5.0.07.440 (64-bit)
Jabber for Windows v9.7.0 build 18474
Issue:
If I am an IPSec VPN user…
I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

Portu,
Thanks for your quick reply.
Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above. I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
I can, though, do whatever you want on the Linux router. Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this. (But I might need a bit of handholding if I need to set up a wireshark andor tcpdump.)
Thanks again.

Cisco Jabber Client for Windows 9.7 Can't Connect IPSec VPN Clients over two ASAs

Environment:
2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
Both ASAs are at version 8.4(5)6
IPSec VPN Client version: 5.0.07.440 (64-bit)
Jabber for Windows v9.7.0 build 18474
Issue:
If I am an IPSec VPN user…
I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

Portu,
Thanks for your quick reply.
Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above. I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
I can, though, do whatever you want on the Linux router. Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this. (But I might need a bit of handholding if I need to set up a wireshark andor tcpdump.)
Thanks again.

BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit

Hi
We have windows 2008 enterprise edition 32 Bit SP2 , While installing BO 3.1 SP2 we are getting the following error.
"Some files could not be created.
Please close all applications, reboot Windows and restart this installation."
1.we do have enough space as well as we are installing it through administrator account.
2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
4.We dont have any firewall connected and windows firewall is off.
Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
Because In the download site there is Windows Server on IA32 32-bit.
is it the correct version?
Please help us to solve this problem
Thanks

We have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
"Failed to get the document information. (LO 26315) A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)".

SAPSprint installation on Windows 2008 R2 Server 64-bit

Dear Gurus,
as we change our print server to Windows 2008 R2 Server 64-bit I need to install SAPSprint for SAP printing with connection type 'S' out of a NW7.0 based system on HP-UX.
Till now we used SAPlpd on a 32-bit Windows Server......
1) Do I simply need to install the xSPrint.exe or can this happen only in combination with the whole SAPGui?
2) According to note 66971 for Windows 2008 R2 Server 64-bit only SAPGui 7.20 is supported.
Does this mean that I also have to use SAPSprint release 7.20 or can I use any other release as well.
On our Windows clients we run SAPGui 7.10.
Is there any correlation between the SAPGui running on the clients and the SAPGui / SAPSprint release running on the print server or can I simply install the highest SAPSprint release 7.20 on the print server to be sure that it will work with WK8 R2 64-bit?
I hope I could explain my problem and I am looking forward to your reply.
Thanks a lot in advance!
Günter

Dear Günter.
Your question is spread over some different areas. Let me point out some tracks to follow:
There is only a 32-bit version of SAPSprint but that one works also under 64-bit; please refer to SAP note 894444.
Regarding SAPgui, in general it is recommended to have the last version as it is downwards-compatible with older versions.
But specially, let me highlight that Windows 2008 R2 is not yet listed in the PAM - and hence not yet supported. The technical prerequisites are met (with a special kernel patch) but not all software is released.
In fact, and just to provide you further details it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released even after 710.
See SAP note 1383873 ("Windows Server 2008 R2 Support").
You can be always up to date with the latest Windows news at:
--> Support of Microsoft Windows Server 2008 R2
Cheers!

10.2.0.4 database is possible on 11gr2 grid in Windows 2008 R2 server..?

Hi all,
can we installed 10.2.0.4 database on 11gr2 grid for windows server 2008 R2 server...?
kindly suggest any possible cases.

Hi Rajesh/all,
I searched lot and get conclude ie. 10.2.0.5 and later versions will support for windows 2008 R2 server. but available only 10.2.0.4. while i try to install database will get error like version not supported.
Here is my case...
i) My two application will support 11gr1database and rest two application support only 10gr2 database version. all application depend by only Windows server.
I installed 11gr2 grid in windows 2008 R2 server successfully.but it will not support the two applications.
consider the above and suggest to install 10gr2 for windows 2008 R2 server.

Oracle 11g ODAC 11.1.0.6.21 on Windows 2008 Standard server gives TNS error

Hi,
I have Oracle 11g ODAC 11.1.0.6.21 installed on my Application server that has 32 bit Windows 2008 Standard. The Oracle database 10g is installed on another 2008 server. On database server I can connect using SQLPlus. But on application server I cannot connect using ODAC SQLPlus. I have given correct service name in tnsnames.ora file.
Error is ORA-12154 TNS: Listener cannot resolve service name
What's wrong? Is 11.1.0.6.21 not meant for Windows 2008? I did not get any errors while installing.
This 11.1.0.6.21 works perfectly for me on XP machine.
I have browsed this forum but not getting clear steps to peform.
Can someone guide me what is needed?
Thanks
Shrini

Hi,
The request to connect from the client is reaching the server but it seems the parsing of the service name is either wrong or the information is correct. Here are a couple of suggestions.
If you have a good known set of sqlnet.ora and tnsnames.ora files on another client where the same connection descriptor works, then backup the curreny client network config files and copy the good known files to the Windows 2008 web server where you see the error. Make sure you recycle the worker processes once the files have been copied.
Try to connect via Ezconnect and by pass the config files to see if you get the same error.
//hostname:port/servicenameofdb
where hostname is the machine where the target database is running
port is the port on the DB machine where the tns listener is running and listening
service name is the service name of the target DB
Use this syntax in the connect string box when attempting to connect from SQL PLUS out of the ODAC home.
You can also run lsnrctl utility on the server and vertify there is a handler for the service name or instance that is the target,
HTH
Jenny B.

Oracle 10.2.0.3 Full Client for Windows 2003 32bit

Hello,
I know this is a stupid question, but I cannot seem to find the download for the full client for 10.2.0.3 for Windows 2003 32bit server. I have found the instant client, but not the full client.
Thanks in advance.
Brian

Hi Zekmoe,
do you have the PATCHES tab in Metalink (metalink.oracle.com)?
If not, please check your PROFILE in metalink - if PATCHES and UPDATES says: NO, then please contact your administrator (mentioned also in your PROFILE) to enable the patch download.
If you'll have the PATCHES tab then go to QUICK LINKS in the patch screen and choose Windows 32bit and 10.2.0.3
Hope this helps - kind regards
Mike

Oracle for Windows 2008 R2

Hi,
I have try to install oracle 10g database on Windows 2008 R2 Standard Edition. But none of the 64 bit installation are not working.
Checking operating system version: must be 5.1 or 5.2 . Actual 6.1
Failed <<<<
I check for specific Installation for this windows version, but i couldn't find it.
Can someone give me advise for this.
Thanks.

Hi,
see Oracle 10g Installation on Windows Server 2008 RC2
Beware that for Windows 2008 R2 you need at least 10.2.0.4. Install 10.2.0.3 found on technet and upgrade from Metalink Patch.
Herald ten Dam
http://htendam.wordpress.com

Novell Client for Windows 4.91 SP2 supported on Windows 2008

Hi Friends
Can Novell Client for Windows 4.91 SP2 Installed on the Windows 2008 Server. if it can be installed is their any know issues.
Thanks
Kaniyath

Originally Posted by AndersG
Kaniyath,
> Can Novell Client for Windows 4.91 SP2 Installed on the Windows 2008
> Server. if it can be installed is their any know issues.
>
1. This is the forum for windows 9x
2. There is no official client for 2008 (yet), but several posters have
claimed success with the Vista client.
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Discover the Novell forums at http://forums.novell.com
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
Enhancement Request
Thanks for the Update, Sorry for posting my query in the wrong forum.

Windows 2008 R2 Server without Service Pack 1 was flag "Not Required" during the SCCM patching/deploying SP1 for 2008

Dear Brothers,
I come to a scenario were one of our Windows 2008 R2 Server without Service Pack 1, was Flag under SCCM 2007 Reports Update Status for Service Pack 1 deployment to be "Not
Required" which definitely inaccurate.
What I want to know what are the conditions for the Software Update to send a status to SCCM Server that the Service Pack is “Not
Required” instead of the other way around?
Is there anyone that can guide me to any KB Article regarding this behavior?
Regards,

Yes, I know this is an old post, I’m trying to clean them up. Did you figure this out, if so how?
I have seen this before and what I have done is manually applied the SP1 to the server. Only then did the error show up as why SP1 didn’t apply. After fixing the error, CM was apply to apply SP1 and other SU to the server.
http://www.enhansoft.com/

Wyse Thin client not connecting to Windows 2008 R2 server

Configuration
SBS 2011 Server
Windows 2008 R2 server with Remote Desktop Services installed, License Manager installed.
WYSE WT3125SE thin clients with Windows CE 5
I setup the Windows 2008 with Remote Desktop Services and was able to successfully connect the Thin client. Then I installed the License Manger and applied my Open license using User Cals. Was able to login. Next day I get the following
error-"Because of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again" I still can connect fine from other machines even Windows Home Ed.
I remove license server and still was unable to connect. Built a second Windows 2008 R2 server with RDS on it. Was able to connect without issue. Pointed it to the first RDS server license manager and have still been able to connect with
the Thin Client. The thin client can rdp to the SBS server without issue in admin mode, can connect to RDS2 server but not RDS1 with the license manger. So my issue is with the license and so my question is what is it with the license server
running on that server that is keeping thin client from connecting. I even did a reload of RDS1 and tested connecting throughout the process and it worked up until I applied the license and then it stops. And then if I uninstall the license, rds, remove
from domain still not able to connect. Any help would be appreciated.

We had the same problem with older terminals after cloning a 2008R2 rds server and sysprep it.
The original rds server worked fine but when the old terminals connect to the new 1 they come up with the error : Because
of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again"
After reading all of the postings about this issue and tried the reactivate solution of the license server,
I was sure that it had something to do with the x509 certificates that are generated the first time you connect to a valid license server.
What I did, I installed a new license server activate it but did not install licenses on it.
I pointed the defective rds server to the newly installed license server and deleted the following registry keys:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
Certificate
X509 Certificate
X509 Certificate ID
X509 Certificate2
Then reboot.
After the reboot all old terminals can connect fine again. As final step I pointed the rds server to the same license server as the other ones,
reboot and all worked fine.
So conclusion is that when you pont a rds server to a license server that has the new type of licenses on it it will generate the wrong x509 certificates
that are not supported by the older clients, by pointing it first to 1 without any rds calls on it, it generates the older x509 certificates which are compatible with the older rdp clients then the switch to new license server will then not regenerate the
x509 certs so it keeps working.
I hope this helps someone
This issue was driving me crazy so very happy that it is resolved now
Cheers Frits

Windows 2008 R2 Client computer backup files (*.dat) can't get restored after re-imaging the Windows 2008 R2 server

I have a Windows server 2008 R2 and I'm using backup feature to backup all computers in the network on it. Recently I ran into an issue and had to re-image my Windows 2008 R2 server and had to restore 2 of my client computers but now I can't restore
files from my client computer backups because they are not listed under Backups & Devices anymore however all backup files are still available on my Backup drive. How can I retrieve files from these backup files?

Anyone out there to help me with this issue?

Oracle Client for Windows 2008 R2 server to connect to Oracle database 9iR2

Similar Messages

Maybe you are looking for