Oracle Client for windows.

Hi,
I just downloaded the Oracle 10g client for Windows.I cant figure out whats the next step.I was expecting to see a .exe file and kind of an installation wizard which would guide me through the process.In the instant client that I downloaded,I see 2 files:
adrci and genezi.
I think I am in the wrong place.Please advise.
Thanks

The file you downloaded should be a large .zip file (almost 500 meg).
Unzip it (with directories intact).
Then at the top level directory you should see setup.exe (or something like that).

Similar Messages

  • Oracle Client for Windows 2008 R2 server to connect to Oracle database 9iR2

    Hi,
    We are running Oracle 9.2.0.7 on Sun solaris (64 Bit) 5.10 and trying to install client on new Windows 2008 R2 (64 - bit) server. (Before this 2008 R2 we were using Windows 2003 32 bit and 9iR2 client was working great.) I can't install 9iR2 clinet and I tried installing 10gR1, 10gR2 and 11gR1 but none of them worked. It is only allowing me to install 11gR2. When I installed 11gR2 client I am getting some 'overflow exception on an arithmetic operation' error.
    1.) Do I have any choice for client installation or only 11gR2?
    2.) Any solution for overflow error?
    Thanks,
    -H

    May I know the reason why ODBC driver is not include in option like Runtime?Oracle software utilizes SQL*Net (not ODBC) to connect to Oracle RDBMS.
    ODBC is not required by Oracle client software to connect to Oracle RDBMS.

  • Requires Oracle client for windows server 2008 Version 6.1

    Hello
    I am using Windows 2008 Server Version 6.1 (64 Bit). I want to install Oracle client on this server. Which version is suitable for my requirement and from where i can download it.
    Thanks
    Sijo Thomas

    user12248518 wrote:
    I am in the same boat, I have downloaded what was told to download and it doesn't install it keeps saying "Unknown" 3 times in a popup when I try to install.Oracle has roughly 3,000 products. You downloaded 'what you were told' - one of those 3,000 products. And it didn't work.
    The amount of information you provide is surprisingly sparse, assuming you want assistance.
    So - if you want help, you might wnat to provide some information:
    - the operating system (including edition, and major service pack if WIndows, or distro && major/minor release and kernel if *nix)
    - the URL froim which you downloaded
    - the country yuo are in (since ORacle could redirect to several sitres based on region)
    - the command or executable, including directory path, you run or double-click on
    - the 'exact' error message, or if a generic one like "Unknown", perhaps a screen shot to convince us that it is actually such a generic message
    It's just a suggestion, but answering in such detail actually tells us you are serious about resolving the issue - you put in effort, and that may convince us to return some effort.

  • Oracle Client for Windows 2008 R2

    is there a 10g or 11g cleint available for Windows 2008 R2? The latest Win64 or Windows 2008 clients all give me an error that saus it supports versions up to 6.0 and I have version 6.1

    There is a work around that can help to install 11g release 1 on windows 2008 R2
    The installer can be executed in compatability mode by right clicking on setup.exe and select "Troubleshoot compatibility" then "Troubleshoot Program" then check option "The program worked in earlier versions of windows......." then choose "Windows Server 2003 (with service pack 1)" and in the last step click "start the program" button.
    hope tihs will start installing Oracle 11g Release 1 on Windows Server 2008

  • Oracle client for WIndows 7

    Hi
    Can one of you let me know if
    a. Oracle 10g Database Client is available for Windows 7
    especially
    Oracle® Database 10g Release 2 Client (10.2.0.1.0) for Microsoft Windows x64 CD B24971-01
    b. Orace 11g Database Client is available for Windows 7
    Oracle® Database 11g Release 1 Client (11.1.0.6.0) for Microsoft Windows x64 (CD) B45545-01
    Thanks
    Cyril

    schavali wrote:
    Currently, no Oracle software is certified for Win7. Rumor is that Oracle plans to certify only 11gR2 for Win7 - ETA is unknown. That said - there are some people who have been successful using the Windows 2008 version of Oracle s/w on Windows 7. Sometimes using the 'ignore system prerequisites' flag will work. A search in the forum will yield some info.
    Not that I would recommend that operation in production.

  • Connect from Windows Client to Oracle 10g for Windows 64-bit

    Have an environment currently running Oracle 10g 32-bit on Windows 2000 Standard, and need to migrate to Oracle 10g 64-bit for Windows. Users connect to the 10g 32-bit database using the Oracle Client for Windows 10g loaded on remote PC's. If we migrate to the Oracle 10g 64-bit on Windows 2003 Server Enteprise Edition 64-bit, what type of client do I have to install on the PC's to access the Oracle 10g 64-bit database?
    Any ehlp/insight will be greatly appreciated.
    Eduardo in Michigan

    In addition to install 32-bit Oracle client to 32-bit Windows OS, you need to know whether your application is compiled to run in 32-bit or 64-bit.
    This is critical because 32-bit application can not see 64-bit Oracle ODBC and OLE DB provider.
    For example, MS SQL Server 2005 uses 32-bit DTS, and SSIS, which needs 32-bit Oracle client
    If you don't know, get a copy of both 32-bit and 64-bit Oracle client, and try one-by-one to know for sure. Please be aware that if regsvr32.exe in the Windows has been overwritten by older software installation, it won't register some DLL properly, and Oracle ODBC, or OLE DB won't show up as well

  • How do I set-up on %ORACLE_HOME%\bin for Oracle client on Windows XP

    How do I set-up on %ORACLE_HOME%\bin for Oracle client on Windows XP?
    The Oracle bin directory is: C:\oracle\ora90\bin
    Thank you!

    If you are asking how to setup the resolution of %ORACLE_HOME%\bin to C:\oracle\ora90\bin, you must create a system environment variable called ORACLE_HOME that is set to a value of C:\oracle\ora90.
    Kind regards,
    Russ

  • Where can I download the Oracle 10g R2 clients for Windows 7?

    Where can I download the Oracle 10g R2 clients for Windows 7?

    Welcome to the forums !
    Pl identify exact versions of "10gR2" and Windows 7. The only certified combination is 10.2.0.5 on Win 7 Professional or higher. Home version of Windows is not supported. Using uncertifed combinations will result in the software not working as advertised.
    See http://docs.oracle.com/cd/B19306_01/relnotes.102/b14264/toc.htm#CIHCFAGA (see Step 4 - the 10.2.0.5 patch can only be downloaded by paying support customers at https://support.oracle.com)
    HTH
    Srini

  • Instant client for windows

    When instant client for windows:
    http://otn.oracle.com/software/tech/oci/instantclient/index.html will be available?
    Thanks.

    Now, it seems :)
    Thinking about it, I later downloaded Client CD from:
    http://otn.oracle.com/software/products/database/oracle10g/htdocs/winsoft.html
    On the Select Install Type page we have as the first choice: InstantClient
    New Installations (9 products)
    Oracle Client 10.1.0.2.0
    Oracle Instant Client 10.1.0.2.0
    RDBMS Required Support Files for Instant Client 10.1.0.2.0
    Oracle ODBC Driverfor Instant Client 10.1.0.2.0
    Oracle C++ Call Interface for Instant Client 10.1.0.2.0
    JDBC/OCI Common Files for Instant Client 10.1.0.2.0
    SSL Required Support Files for InstantClient 10.1.0.2.0
    Oracle JDBC Thin Driver for JDK 1.4 for Instant Client 10.1.0.2.0
    Oracle Instant Client Required Support Files 10.1.0.2.0
    Maybe it's not quite complete after all, or Oracle just forgot to update the Instant Client main page...

  • Oracle Client for DOS

    Hi!
    Where can I download Oracle Client for DOS to connect to Oracle Server version 7, 8, 9 or 10g?
    Thank you for any advice.
    Igor Shulgin
    Chelyabinsk, JSC Uralsvyazinform

    Oracle hasn't produced a DOS client at least in the past 6 years. I'm not aware of a DOS client that has ever been produced, but I can't say that for sure. If there was a DOS client in the Oracle 6 or 7 days, getting it would be a challenge-- you'd have to contact Oracle support to see if that have an archive that goes back that far. Most likely, you'd have to find someone who still had the old media. Even if you did, though, an Oracle 6 or 7 client cannot connect to an Oracle 9i or 10g database. An Oracle 6 client can't even connect to an Oracle 8i database.
    In other words, you probably can't connect from a DOS machine. If you install Windows, you can use the Windows client from a DOS window.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Aix db client for windows

    did client access software for windows ships with oracle 8i/9i for aix

    jcasino,
    2003 workstation? XP is the current Windows workstation and Vista is
    the next.
    Though its does state "The Novell Client for Windows 2000/XP/2003
    software allows users of Windows 2000/XP/2003 workstations to access and
    use all of the services available on servers running eDirectory�" in the
    Product Description on the download site rest assured that they meant
    Windows versions 2000/XP/2003 and its supported on Windows Server 2003.
    Tony Pedretti

  • Oracle client for CA Erwin data modeler

    Does anyone know how to install and configure oracle client for Erwin data modeler?
    CA tech support says check with oracle

    >
    I need some help understanding what client means.
    >
    Client is any server that connects to a database. I am assuming that CA will be installed on a Windows XP machine and it will connect to a remote database on another server. I am assuming since you have not provided any details.
    >
    I can upgrade to 11g database. No problem
    >
    OK - not sure what this has to do with your issue.
    >
    I am looking for the oracle software that connects to CA Erwin
    >
    See my links posted above
    >
    I am not looking for Oracle database install
    >
    The client install does not install a database - it installs the necessary components needed to connect to a remote Oracle database.
    >
    Please be more specific.
    >
    More specific with what ? The more lucid details your provide, the better the quality of the responses on these forums.
    HTH
    Srini

  • No Jabber client for Windows Phone 8.1

    Can you advise on when a Jabber client for Windows Phone 8.1 will be released?

    Roadmap questions cannot be addressed here, either ask in a partner forum, or reach your SE/AM for this.

  • How to create a VPN client for Windows Phone 8.1?

    We have our own VPN client for Windows and Android. I would like to create a VPN client  for Windows phone 8.1. After referring these site I found that there are some third
    party VPN plugins available for WP 8.1.
    I checked OpenVPN but it is also not available for WP 8.1.
    Is there any APIs available for creating a VPN client in WP 8.1 similar to
    VpnService provided by Android SDK ?

    The VPN APIs for WP8.1 are not open at this time.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Directory Caching issue with Cisco Jabber client for Windows

    Hi ,
    I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
    Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
    Is there any automated way to remove the cache file? 
    Here is the detail of CUCM,Presence and Jabber.
    CUCM version: 9.1.x
    Presence          : 9.1.X
    Jabber              : 10.5 and 10.6

    Hello
    On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
    Network Device Enrollment Service.
    Our certificate for the CUPS were generated on this Certification Authority too.
    I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
    Enterprise Trust store for the users.
    But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
    I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
    Our partner left us alone with that unfortunately.
    Florent
    EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

Maybe you are looking for

  • UPK 3.6.1 Gkn.OnDemand.Library.OfflineException - Possible solution

    Hi all, Apology if this has been posted already, but I search Oracle articles/forums/support and various websites and couldn't find any solution until I just happen to stumble upon it by chance. I thought I'd try and share this solution in case someo

  • Korg Legacy M1 in multi mode in Logic?

    I have a Korg Legacy M1 plugin. Although there are multiple outputs selectable in the gui of the plugin, there is no multi out version available in the instrument menu in Logic's channel strip, only stereo. Is this just not implemented in Logic, or a

  • Problem of Japanese Imput in Blackberry OS 10

    I am Japanese and bought Blackberry passport. This is great smartphone and I love it! Hoever, there are so many problems when I type Japanese word by Blackberry 10 OS. JAPANESE input and conversion is not smart and there are so many miss conversion (

  • Save BI Workbook in a Role as a end user

    Hi guys, I have issue with quries in Bex analyzer I have created a role with S_USER_AGR = 2 but as a test user using this role I can't save the query to the workbook role, it gives me this error " RSOBJS   160 No authorization to create role entry". 

  • Sale value of group asset- sub asset more than wdv less than group total

    Hi, I am maintaining group asset for Income Tax Depreciation. All the asset under the same class is consider single asset for Income tax purpose. For eg value of Plant and machinery under Income tax is derived for all asset totaled together after dep