Oracle client in solaris

Hi
As we can install Oracle client on windows box , can anybody please let me know that if I want to use one box of SOLARIS as a client mens i want o install application and i only required client part then is there anything specific available I can install oracle enterprise server but i dont want to use my LICENSE.

Are you looking for any specific version? You have not mentioned that in your post.
There are three versions of Oracle on Solaris. One for x86 (32 bit), x86 (64 bit)and other for SPARC.

Similar Messages

Is there any Oracle client for RedHat Linux

Hi,
I m searching for the Oracle9i client for RedHat linux. Is it available free. If yes please tell the site name.
thanx
-biyat

Which oracle version u have for Solaris intel
[email protected]
Hi,
We have an oracle server (8i) running on Windows NT. I need a oracle client on Solaris Intel 8 to connect to the Oracle server running on NT.
Thanks
--John

Searching Oracle 8.1.7 Client for Solaris on x86/Intel

Hi all,
I need an Oracle client 8.1.7 running on a Sun Solaris on a Intel/x86 chipset (in VMware)
Exists there any location to download this client?
thanx for help!
Andreas
Salzburg, Austria

Are there plans to have a Solaris x86 version downloadable on OTN? I am making the OS decision for a new development server. I would like it to be Solaris x86 but if Oracle is a no-go on Solaris x86, I will have to use Linux or... hate to say it... M$

ORACLE CLIENT 9.2.0.6.0 for Solaris

I need to download ORACLE CLIENT 9.2.0.6.0 for solaris. I could not locate the link online.
Can somone provide me the link from where this can be done?
regards
akshay
IT Analyst
Morgan Stanley.

9.2.0.6 is not a basic release,it's a patchset and available on metalink only. You need a valid support contract.
Werner

Oracle client 9.2.0.1 on Solaris 10

Is oracle client 9.2.0.1 certified on Solaris 10?

Check yourself the answer helped by the following link :
http://www.oracle.com/technology/support/metalink/index.html
Nicolas.

Installing Oracle Virtual Directory Manager client on Solaris 10

Hi,
While installing Oracle Virtual Directory Client on solaris 10, I am getting
"ovidm1014.bin : /tmp/install.dir.<number>/linux/resource/jre/bin/java: cannot execute" error while initiating the installer.
Can someone look into the message and advice me in overcoming the issue as we are held up on this for three days?
Earliest reply is favoured
Thanks

Hi,
Thanks once again for reply!!
If you already installed Oracle Virtual Directory Manager on Sun SPARC, can you brief us pre-requisite setting and installation steps, so that we can follow the same.
Because, we are getting error in the initialization of installation process itself. So, I think there must be some configuration settings to be made.
We already raised SR (Service Request) with Oracle, bu there is no reply from their side till now.
I am waiting for your reply ASAP
Regards

Is Oracle client (v9.x.x.x or any) available for "Solaris 10 AMD64" ?

Is Oracle providing a client for "Solaris 10 AMD-64" ?
If so could you let me know the link to a trail/download s/w ?
Thanks in advance.
regards,
Srinivas Jaltaru

Hi Hans!
Thanks much.
Currently we are using Oracle database v9, so we are more interested on Oracle 9.x client to be run on "Solaris 10 AMD64".
I searched for the combination of "Oracle client 9.x"/"Solaris x86-64", and came to know this combination is missing(or unavailable) from the client list provided at Oracle web site.
Regards,
Srini J

Is Oracle 11.1.0.7 client for solaris relaesed or not?

Just want to know if 11.1.0.7 client for solaris is releaseed or not. I only can find 11.1.0.6 client for solaris on OTN download site. I plan to upgrade my server to 11.1.0.7.
Thanks
Edited by: user6432683 on Mar 13, 2009 8:20 AM

11.1.0.7 is a patchset,not complete software. As usual patchsets are available on metalink,not on OTN. You need a valid account.
Werner

SAP ECC6.0 SR3 on Oracl 10 g solaris 10 hangs during installation!!!

Hi,
I am installting SAP ECC 6.0 SR3 with DB oracle 10g OS solaris 10 jdk version java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) Client VM (build 1.4.2_16-b05, mixed mode)
H/W : T6320 Blade server
Memory : 16GB
during installation at Import ABAP phase while importing last package SAPSSEXC it hung on me there were no error logs as such nor the FS was full...
it resumed after couple of hrs..
but hung again at IMport Java Dump phase
and again no error logs...
so, my concern here is that is there any bug in SR3 or i am not able to find the error logs
the logs i check are:
import_monitor.java.log:
tail -100f import_monitor.java.log
java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_16-b05, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 27, failed 0, total 28.
Import Monitor jobs: running 1, waiting 0, completed 27, failed 0, total 28.
Loading of 'SAPVIEW' import package: OK
Import Monitor jobs: running 0, waiting 0, completed 28, failed 0, total 28.
jload.java.log>>while import java dump phase:
tail -100f jload.java.log
INFO: trying to create table CAF_RT_NUMRNG
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_NUMRNG created
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_NUMRNG loaded (0 rows)
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_PERM_REL
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_PERM_REL created
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_PERM_REL loaded (0 rows)
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_PK_GEN
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_PK_GEN created
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_PK_GEN loaded (0 rows)
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SRVMODULE
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SRVMODULE created
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SRVMODULE loaded (0 rows)
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCCFG
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCCFG created
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCCFG loaded (0 rows)
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCDEF
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCDEF created
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCDEF loaded (0 rows)
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCLCK
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCLCK created
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCLCK loaded (0 rows)
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SYSCFG
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SYSCFG created
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SYSCFG loaded (0 rows)
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_ATTR
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_ATTR created
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_ATTR loaded (0 rows)
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_FAILED
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_FAILED created
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_FAILED loaded (0 rows)
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_IDX
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_IDX created
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_IDX loaded (0 rows)
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_LINKS
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_LINKS created
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_LINKS loaded (0 rows)
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPCEL
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPCEL created
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPCEL loaded (0 rows)
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPCOT
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPCOT created
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPCOT loaded (0 rows)
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPELE
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPELE created
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPELE loaded (0 rows)
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPMES
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPMES created
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPMES loaded (0 rows)
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPMMP
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPMMP created
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
jload.log>>while import java dump phase :
tail -100f jload.log
12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_MEMBS loaded (0 rows)
12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_UM_RELGR_TEXTS
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: table CAF_UM_RELGR_TEXTS created
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_TEXTS loaded (0 rows)
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_UM_RELGR_WORDS
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: table CAF_UM_RELGR_WORDS created
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_WORDS loaded (0 rows)
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIG
12.09.08 12:48:21 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIG created
12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIG loaded (9195 rows)
12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIGENTRY
12.09.08 12:48:50 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIGENTRY created
12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIGENTRY loaded (20235 rows)
12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_KEYSEQUENCE
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_KEYSEQUENCE created
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: J2EE_KEYSEQUENCE loaded (1 rows)
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_PLUG_IN_SAVES
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: table SP_PLUG_IN_SAVES created
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: SP_PLUG_IN_SAVES loaded (0 rows)
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_RESULTS
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: table SP_RESULTS created
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: SP_RESULTS loaded (0 rows)
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_STORAGE
12.09.08 13:44:05 com.sap.inst.jload.Jload dbImport
INFO: table SP_STORAGE created
12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
INFO: SP_STORAGE loaded (2 rows)
12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_FGUID
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_FGUID created
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: TC_WDRR_FGUID loaded (0 rows)
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_LAYERS
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_LAYERS created
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: TC_WDRR_LAYERS loaded (2 rows)
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_MRO_FILES
12.09.08 13:44:09 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_MRO_FILES created
PLEASE HELP ASAP!!!!!!
Regards,
Sohal....

Hi Ashok,
Thanks for prompt response
Yes Oracle is up....it bounced the Db once before performing Post Load activities...step
now, it resumed the installation and currently updating the DB statistics.
please chk the logs below:
tail -200f sapinst.log:
INFO 2008-09-12 14:12:05.250
Execution of the command "/oracle/RGP/102_64/bin/lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 12-SEP-2008 14:12:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=RGP.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
Start Date                11-SEP-2008 20:28:39
Uptime                    0 days 17 hr. 43 min. 25 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /oracle/RGP/102_64/network/admin/listener.ora
Listener Log File         /oracle/RGP/102_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP.WORLD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=FLGPPSAP01)(PORT=1527)))
Services Summary...
Service "RGP" has 1 instance(s).
Instance "RGP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2008-09-12 14:12:13.667
Execute step createOracleStatisticsSynonyms of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
INFO 2008-09-12 14:12:14.023
Account orargp already exists.
INFO 2008-09-12 14:12:14.033
Account 0 already exists.
INFO 2008-09-12 14:12:14.049
Account dba already exists.
INFO 2008-09-12 14:12:14.058
Account 104 already exists.
INFO 2008-09-12 14:12:14.078
Account 0 already exists.
INFO 2008-09-12 14:12:14.096
Account 105 already exists.
INFO 2008-09-12 14:12:15.836
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
INFO 2008-09-12 14:12:15.972
Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3 is written to the logfile brconnect.log.
INFO 2008-09-12 14:12:18.817
Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3" finished with return code 0. Output:
BR0801I BRCONNECT 7.00 (32)
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.17
BR0833I Creating public synonyms for database log owner SAPSR3...
BR0925I Public synonym SAP_SDBAH created successfully for table SAPSR3.SDBAH
BR0925I Public synonym SAP_SDBAD created successfully for table SAPSR3.SDBAD
BR0925I Public synonym SAP_MLICHECK created successfully for table SAPSR3.MLICHECK
BR0925I Public synonym SAP_SAPLIKEY created successfully for table SAPSR3.SAPLIKEY
BR0925I Public synonym SAP_DBAML created successfully for table SAPSR3.DBAML
BR0925I Public synonym SAP_DBARCL created successfully for table SAPSR3.DBARCL
BR0925I Public synonym SAP_DBAFID created successfully for table SAPSR3.DBAFID
BR0925I Public synonym SAP_DBAEXTL created successfully for table SAPSR3.DBAEXTL
BR0925I Public synonym SAP_DBAREOL created successfully for table SAPSR3.DBAREOL
BR0925I Public synonym SAP_DBABARL created successfully for table SAPSR3.DBABARL
BR0925I Public synonym SAP_DBADFL created successfully for table SAPSR3.DBADFL
BR0925I Public synonym SAP_DBAOPTL created successfully for table SAPSR3.DBAOPTL
BR0925I Public synonym SAP_DBASPAL created successfully for table SAPSR3.DBASPAL
BR0925I Public synonym SAP_DBABD created successfully for table SAPSR3.DBABD
BR0925I Public synonym SAP_DBABL created successfully for table SAPSR3.DBABL
BR0925I Public synonym SAP_DBATL created successfully for table SAPSR3.DBATL
BR0925I Public synonym SAP_DBAOBJL created successfully for table SAPSR3.DBAOBJL
BR0925I Public synonym SAP_DBAPHAL created successfully for table SAPSR3.DBAPHAL
BR0925I Public synonym SAP_DBAGRP created successfully for table SAPSR3.DBAGRP
BR0925I Public synonym SAP_DBAERR created successfully for table SAPSR3.DBAERR
BR0925I Public synonym SAP_DBATRIAL created successfully for table SAPSR3.DBATRIAL
BR0925I Public synonym SAP_SVERS created successfully for table SAPSR3.SVERS
BR0925I Public synonym SAP_TGORA created successfully for table SAPSR3.TGORA
BR0925I Public synonym SAP_IGORA created successfully for table SAPSR3.IGORA
BR0925I Public synonym SAP_TSORA created successfully for table SAPSR3.TSORA
BR0925I Public synonym SAP_TAORA created successfully for table SAPSR3.TAORA
BR0925I Public synonym SAP_IAORA created successfully for table SAPSR3.IAORA
BR0925I Public synonym SAP_DD02L created successfully for table SAPSR3.DD02L
BR0925I Public synonym SAP_DD09L created successfully for table SAPSR3.DD09L
BR0925I Public synonym SAP_DDNTT created successfully for table SAPSR3.DDNTT
BR0925I Public synonym SAP_DBCHK created successfully for table SAPSR3.DBCHK
BR0925I Public synonym SAP_DBDIFF created successfully for table SAPSR3.DBDIFF
BR0925I Public synonym SAP_DBSTATC created successfully for table SAPSR3.DBSTATC
BR0925I Public synonym SAP_DBSTATTORA created successfully for table SAPSR3.DBSTATTORA
BR0925I Public synonym SAP_DBSTATIORA created successfully for table SAPSR3.DBSTATIORA
BR0925I Public synonym SAP_DBSTATHORA created successfully for table SAPSR3.DBSTATHORA
BR0925I Public synonym SAP_DBSTAIHORA created successfully for table SAPSR3.DBSTAIHORA
BR0925I Public synonym SAP_DBCHECKORA created successfully for table SAPSR3.DBCHECKORA
BR0925I Public synonym SAP_DBMSGORA created successfully for table SAPSR3.DBMSGORA
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
BR0834I Public synonyms for database log owner SAPSR3 created successfully
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
BR0802I BRCONNECT completed successfully
INFO 2008-09-12 14:12:23.841
Execute step setOraclePasswords of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
INFO 2008-09-12 14:12:25.190
Account orargp already exists.
INFO 2008-09-12 14:12:25.194
Account dba already exists.
INFO 2008-09-12 14:12:25.198
Account orargp already exists.
INFO 2008-09-12 14:12:25.202
Account dba already exists.
INFO 2008-09-12 14:12:25.251
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
INFO 2008-09-12 14:12:25.260
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
INFO 2008-09-12 14:12:28.279
Account orargp already exists.
INFO 2008-09-12 14:12:28.290
Account 0 already exists.
INFO 2008-09-12 14:12:28.305
Account dba already exists.
INFO 2008-09-12 14:12:28.315
Account 104 already exists.
INFO 2008-09-12 14:12:28.335
Account 0 already exists.
INFO 2008-09-12 14:12:28.353
Account 105 already exists.
INFO 2008-09-12 14:12:30.123
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
INFO 2008-09-12 14:12:30.269
Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX is written to the logfile brconnect.log.
INFO 2008-09-12 14:12:31.006
Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX" finished with return code 0. Output:
BR0801I BRCONNECT 7.00 (32)
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0828I Changing password for database user SAPSR3
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0829I Password changed successfully in database for user SAPSR3
BR0830I Password inserted successfully into table OPS$RGPADM.SAPUSER for user SAPSR3
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0802I BRCONNECT completed successfully
INFO 2008-09-12 14:12:31.574
Account orargp already exists.
INFO 2008-09-12 14:12:31.578
Account dba already exists.
INFO 2008-09-12 14:12:31.583
Account orargp already exists.
INFO 2008-09-12 14:12:31.587
Account dba already exists.
INFO 2008-09-12 14:12:31.641
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
INFO 2008-09-12 14:12:31.649
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
INFO 2008-09-12 14:12:33.918
Account orargp already exists.
INFO 2008-09-12 14:12:33.928
Account 0 already exists.
INFO 2008-09-12 14:12:33.944
Account dba already exists.
INFO 2008-09-12 14:12:33.953
Account 104 already exists.
INFO 2008-09-12 14:12:33.973
Account 0 already exists.
INFO 2008-09-12 14:12:33.991

Error in installation of 64 bit 11g client on solaris sparc64 bit

hi,
i am getting below error while installing the 11g 64 bit client on solaris sparc 64 bit machine.
following error is occurred while installing 64 bit oracle 11.2 client on Solaris 64-bit sparcv9 OS:
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
kindly assist.
Thanks,
-Shubhen

user12052679 wrote:
hi,
i am getting below error while installing the 11g 64 bit client on solaris sparc 64 bit machine.
following error is occurred while installing 64 bit oracle 11.2 client on Solaris 64-bit sparcv9 OS:
Pl read the Install Guide to ensure you meet all of the pre-installation requirements - http://docs.oracle.com/cd/E11882_01/install.112/e24347/pre_install.htm#CIHFICFD
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
kindly assist.
Thanks,
-ShubhenHTH
Srini

Oracle Client Upgrade From 9.2.0.6 to 9.2.0.8

Hi All,
I was upgradin the oracle client From 9.2.0.6 to 9.2.0.8 as this is a prerequiste for upgrading to ECC 6.0.
I have upgraded by going through SAP Note 964783.
But when i am checking that it still showing the same client verison.
And also i am not able to start the SAP . it states that Oracle is down. But oracle is running and also Oracle listner..
Please Guide me ..
Thanks,
Mahesh

HI,
Sorry i am upgrading client from 9.2.0.6 to 9.2.0.7, yes there are multiple SAP instances are there.
OS Sun Solaris 5.9
Please find the .dbenv_<hostname>.csh
Oracle RDBMS Environment
setenv THREAD NOPS
if ( $THREAD == NOPS ) then
    set    DBSID = ES1
else
    if ( $THREAD != "001" ) then
       set DBSID = ES1_$The specified item was not found.
    else
       set DBSID = ES1
    endif
endif
setenv dbms_type       ORA
setenv dbs_ora_tnsname $DBSID
setenv dbs_ora_schema SAPES1
setenv ORACLE_PSRV     ES1
setenv ORACLE_SID      $DBSID
setenv DB_SID          ES1
setenv ORACLE_HOME     /oracle/ES1/920_64
setenv ORACLE_BASE     /oracle
setenv ORA_NLS33       /oracle/client/92x_64/ocommon/nls/admin/data
setenv NLS_LANG        AMERICAN_AMERICA.UTF8
setenv SAPDATA_HOME    /oracle/ES1
setenv DIR_LIBRARY     /usr/sap/ES1/SYS/exe/run
foreach d ( $ORACLE_HOME/bin )
    set i=0
    foreach p ( $path )
        if ( "$p" == "$d" ) then
            set i=1
            break
        endif
    end
    if ( $i == 0 ) then
        set path = ( $d $path )
    endif
end
switch (`uname`)
    case AIX*:
        if ( ! $?LIBPATH ) then
            setenv LIBPATH /usr/lib:/lib:/usr/sap/ES1/SYS/exe/run
        else
            foreach d ( /usr/sap/ES1/SYS/exe/run )
                set i=0
                foreach p ( `echo $LIBPATH | sed 's/:/ /g'` )
                    if ( "$p" == "$d" ) then
                        set i=1
                        break
                    endif
                end
                if ( $i == 0 ) then
                    setenv LIBPATH $:$d
                endif
            end
        endif
        breaksw
    case HP*:
        if ( ! $?SHLIB_PATH ) then
            setenv SHLIB_PATH /usr/sap/ES1/SYS/exe/run
        else
            foreach d ( /usr/sap/ES1/SYS/exe/run )
                set i=0
                foreach p ( `echo $SHLIB_PATH | sed 's/:/ /g'` )
                    if ( "$p" == "$d" ) then
                        set i=1
                        break
                    endif
                end
                if ( $i == 0 ) then
                    setenv SHLIB_PATH $:$d
                endif
            end
        endif
        breaksw
    case SIN*:
    case Reliant*:
    case Linux*:
        if ( ! $?LD_LIBRARY_PATH ) then
            setenv LD_LIBRARY_PATH /usr/sap/ES1/SYS/exe/run:$ORACLE_HOME/lib
        else
            foreach d ( /usr/sap/ES1/SYS/exe/run $ORACLE_HOME/lib )
                set i=0
                foreach p ( `echo $LD_LIBRARY_PATH | sed 's/:/ /g'` )
                    if ( "$p" == "$d" ) then
                        set i=1
                        break
                    endif
                end
                if ( $i == 0 ) then
                    setenv LD_LIBRARY_PATH $:$d
                endif
            end
        endif
        breaksw
    case OSF*:
        if ( ! $?LD_LIBRARY_PATH ) then
            setenv LD_LIBRARY_PATH /usr/sap/ES1/SYS/exe/run:/oracle/client/92x_64/lib:$ORACLE_HOME/lib
        else
            foreach d ( /usr/sap/ES1/SYS/exe/run /oracle/client/92x_64/lib $ORACLE_HOME/lib )
                set i=0
                foreach p ( `echo $LD_LIBRARY_PATH | sed 's/:/ /g'` )
                    if ( "$p" == "$d" ) then
                        set i=1
                        break
                    endif
                end
                if ( $i == 0 ) then
                    setenv LD_LIBRARY_PATH $:$d
                endif
            end
        endif
        breaksw
    default:
        if ( ! $?LD_LIBRARY_PATH ) then
            setenv LD_LIBRARY_PATH /usr/sap/ES1/SYS/exe/run
        else
            foreach d ( /usr/sap/ES1/SYS/exe/run )
                set i=0
                foreach p ( `echo $LD_LIBRARY_PATH | sed 's/:/ /g'` )
                    if ( "$p" == "$d" ) then
                        set i=1
                        break
                    endif
                end
                if ( $i == 0 ) then
                    setenv LD_LIBRARY_PATH $:$d
                endif
            end
        endif
        breaksw
endsw
end Oracle RDBMS Environment
And also when i am executing R3trans -d its showing that ORA-12541: TNS:no listener
When iam checking the services i can c that listner is running.Please guide me .
Thanks,
Mahesh

Oracle Client(8.0.5) installation on Linux(6.0)

Please Help,
These are the steps followed in the Oracle
client installation of the Linux
version
1. Loaded SQLNET, TCP/IP Adapter and sqlplus from the Oracle CD for Linux.
2. While running SQLPLUS it gave the 'Missing Library file'
3. Added LD_LIBRARY_PATH parameter to .profile, problem solved.
4. While running SQLPLUS a new message 'Segmentation Fault - Core dumped'
started coming.
After analysing it was observed that none of the Linux memory parametre
required for oracle had been tuned. these parameters are :-
shmmax,shmseg, shmmin, shmmni, semmns, semmni
We know the value of these parameters but the problem is that in linux we
are not able to find the Kernel paramater file,
as we do not know the Kernel parameter file name and the location in which
it is situated.
I have done the configuration of Oracle in Sun Solaris successfully and
also modified the Kernel parameter. the following in the sample data
extracted from the /etc/system file present in Sun Solaris.
set shmsys:shminfo_shmmax=208388608
set shmsys:shminfo_shmseg=15
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=150
set semsys:seminfo_semmns=250
set semsys:seminfo_semmni=100
What I request is that kindly tell me how and where to update the same in
the Linux for installing Oracle Client(8.0.5) on Linux(6.0).Regards And Thanks
Sanjay Kr. Pandey

You'll have to be prepared to wade through and understand the Linux way of recompiling your kernel. The files can be located using the "find" command. There is some great "HOW-TO"s in the Linux RedHat site.
Tip: Be very careful how you answer the "make config" questions because it can mess up the resulting VMLINUZ object. Also, be sure to place secondary entry in your "lilo.conf" to allow you a graceful way of getting back to the old kernel should the new one fail.
Good Luck!

Could not find main class program will exit error while installing Oracle Client 32 bit on windows 7 32 bit OS?

Hi Experts,
When I am installing Oracle client 32 bit software on Windows 7 32 bit I am getting error as "could not find main class program will exit"
I have tried installing latest Java software 7 also JDK 1.6.0_34 still I am getting the same problem below is my " oraparam.ini " details
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.xml
LICENSE_LOCATION=
BOOTSTRAP_COMPS="oracle.swd.oui:11.1.0.6.0,oracle.swd.oui.core:11.1.0.6.0,oracle.jdk:1.5.0.1.1"
JRE_SCRATCH_LOC=jdk/jre
JRE_MEMORY_OPTIONS=" -mx96m"
DEFAULT_HOME_LOCATION=product\11.1.0\client
DEFAULT_HOME_NAME=OraClient11g_home
NO_BROWSE=/net
NLS_ENABLED=TRUE
BOOTSTRAP=TRUE
EXT_JLIB=../stage/ext/jlib
OUI_VERSION=11.1.0.6.0
## JRE_VERSION is only for Windows. This is to copy accessbridge dlls
JRE_VERSION=1.4.2
ACCESS_DIR=../install/access
#SHOW_HOSTNAME=ALWAYS_SHOW shows the hostname panel always
#SHOW_HOSTNAME=NEVER_SHOW does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW shows the hostname panel on condition
SHOW_HOSTNAME=NEVER_SHOW
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
SILENT_VARIABLE_VALIDATION=TRUE
[Generic Prereqs]
MIN_DISPLAY_COLORS=256
[IMAGES]
FILE1=images/billboards.gif
LICENSE_LOCATION=license.txt

Duplicates of the other two times you asked this question:
https://forums.oracle.com/thread/2559093
https://forums.oracle.com/thread/2558027
(and this time, your question does not appear to have anything to do with this particular forum space, either)
Duplicate is locked.
Do not EVER multi--post. That is extremely bad forum etiquette.

32 Bit Oracle Client Libraries on a 64 Bit Machine

Hello,
I own a 32 bit application that is running on a 64 bit linux machine currently only installed with 64 bit oracle client libraries. I requested the administrator install the 32 bit client libraries so that my application can function and they tell me that it is not possible. They cited a Meta-Link article that I do not seem to have access to, but this doesn't seem right. Has anyone else ever installed 32 bit compatible client libraries on a 64 bit machine. Thanks
-Steve
(First Time Poster)

On Linux (and this is only on Linux, not on Solaris and AIX !) if the OS is 64bit, only 64 bit Oracle is supported.
Check the Certify pages for Linux x86-64. This is in the critical notes :
"Linux x86-64, support on AMD64/EM64T and Intel Processor Chips that adhere to the x86-64 architecture with supported Linux releases. *Running Oracle 32-bit on AMD64/EM64T (64-bit OS) is not supported .*
Oracle 32-bit running on AMD64/EM64T with a 32-bit OS is supported, refer to platform Linux x86 for more information on product availability. "
Hemant K Chitale
http://hemantoracledba.blogspot.com
You can access certify at http://www.oracle.com/technology/support/metalink/index.html
Edited by: Hemant K Chitale on Sep 3, 2009 11:43 PM

Oracle 8i on Solaris

Hi
I am not sure that it is correct forum to post my problem. I posted the same problem on Oracle JVM forum, and some one told me to post it in Linux forum. Any way I expect to get some help.
I am installing Oracle 8i on Solaris machine. I am able to connect to Oracle from client machine as long as the solaris server is up. Once i restart the Solaris machine, the Oracle can not be connected from client. Is there some configuration file for automatic start and shutdown of oracle when Solaris is restarted.
Any body knows the solution, please help.
With regards.
From Asad.
null

Refer to chapter 4 of the Solaris Installation guide (if you don't have this go to http://technet.oracle.com/docs/products/oracle8i/doc_index.htm )
null

Oracle client in solaris

Similar Messages

Maybe you are looking for