Oracle client required for Essbase Installation

Hi
I installed Essbase server and EAS server with foundation services in one Windows Machine.
My RDBMS (Oracle) Is installed on a different Machine.
Do i need to install Oracle client on my Essbase machine to configure with RDBMS? or Oracle Client installation is not required to configure with RDBMS?
Thank you.

You don't need the Oracle client if you want to configure the foundation database as it uses JDBC drivers which are included in the foundation installation.
The Oracle client is useful if you want to set up Oracle ODBC connections to be used with essbase SQL data loads.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Oracle Client requirement for BO XI 3.1 Desktop Intelligence

Will the BO XI3.1 Infoview or Desktop Intelligence work with Oracle 8i Client on the user's desktop? Or do they need to Oracle client versions 9i and greater.

Hi
for Desktop Intelligence XI 3.1 the oldest officially supported version of Oracle is Oracle 9.2 over the native client (Oracle Net Client 9.2). What you can try though is to use the Oracle ODBC driver since Generic ODBC sources are also supported.
Regards,
Stratos

Oracle client Download for 9208 windows

Hi .
Kindly help me with link to download oracle client for 9208 version for Windows 2000 32 bit.
Regards
Vijay

Refer readme for patch 4547809 on MOS.
Section "12 Patch Set Components " - table entry "Oracle Client required support files " confirms that this patch can be applied on 9.2.0.x client installation.
There is no sentence indicating the same in 9.2.0.8 readme (which is there in any 10.2.0.x readme).
<quote>
You can apply the Oracle Database release 10.2.0.4 patch set to the following Oracle Database 10g release 2 installations
Oracle Database Client
<quote>

What oracle edition required for sap ecc and ep in one box

hi friends
what oracle edition required for sap ecc installation which supports the HA and disaster recovery plan
10g
1. Oracle Database Standard Edition One 10 g
2. Oracle Database Standard Edition 10g
3.Oracle Database Enterprise Edition 10g
3. Oracle Database Express Edition 10g
4. Oracle Database Personal Edition 10g
thanks in advance friends
regards
raja

hi,
I believe that SAP only support enterprises edition one because you'll get all database features.
ardhian
http://sapbasis.wordpress.com

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts;

ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used

As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA

I was installing SQLServer2014_Developer which I had just purchased as a 64bit iso download to VirtualBox Windows_10_64bit Instance that i had just created.
I got the following error about 90% through the SQLServer2014_Developer install:
>>> ===================================================================
>>> SQL Server 2014
>>> ===================================================================
>>> TITLE: Microsoft SQL Server 2014 Setup
>>> ------------------------------
>>> The following error has occurred:
>>> The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used.
>>> This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
>>> For help, click:
>>> h t t p ://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
>>> ------------------------------
A quick rerun of failed SQLServer2014_Developer install just for the Management_Tools and review of the SQLServer2014_Developer install logs
confirmed error still prelevant:
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\...
>>> ...
>>> Detailed results:
>>>   Feature:                       Management Tools - Complete
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>>
>>>   Feature:                       Management Tools - Basic
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred during the setup process of the feature.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>> ...
Reading though the many Google hits going way back AD-2000/AD-2006/AD-2011/AD-2014 for various installs including SQLserver_2008/2012 etc
I noted that in the main there were x2 common themes.
1. Problem with corruption the original download.
--- Although I had not run the download checksum
--- I had previously just installed SQLServer2014_Developer successfully, so at the minute, I was confident downloads were ok.
--- Many hits mentioned this 'Sql.cab' file and 90% of the install had been successfull -
--- I figured the chances of us all having corruption of this one files were agaianst the odds and
---   probably re-downloading it would not fix this - but I kicked a re-download off anyhow .
While it was running ...
2. Network issue when installing - some of the hits asked if could be related to Virtual drives.
--- This struck a chord
--- I had downloaded the SQLServer2014 .iso to my host PC and then copied it onto one OneDrive so I could access it within the VirtualBox_Windows_10.
--- From within the VirtualBox_Windows_10 I had then used SetupVirtualCloneDrive5450.exe to mount the OneDrive SQLServer2014 .iso and then autorun the install.
What worked for me ...
--- I decided to
--- 1. Copy the same SQLServer2014 .iso that had failed to install x2 from OneDrive to the c:\ root of the VirtualBox_Windows_10.
--- 2. Remount the same SQLServer2014 .iso from c:\ again using SetupVirtualCloneDrive5450.exe.
--- 3. Re-run the SQLServer2014 install using the repair mode.
This time the [Maintenance] [Repair] install completed with all elements showing installed successfully.
Hope this helps
Andy

Error: the cabinet file required for this installation is corrupt and cannot be used.

Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
"the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
Any help is appreciated! Thanx

Hi Dazattack, I suggest you check the following KB article first:
Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
http://support.microsoft.com/kb/314810
Note: Though it's for Office, some steps in the article can still be used in such scenario.
Meanwhile, can you install other applications that downloaded from the Internet ?
Sean Zhu - MSFT

Oracle Client Download for Windows XP

Is it possible to get the Oracle Client download for Windows XP?
Thanks,
Cherie Machler

http://download.oracle.com
http://lmgtfy.com/?q=How+to+Oracle+Client+Download+for+Windows+XP

OS does not meet the minimum system requirements for this installer. 10.6.0 is the minimum required

How do I get my software? This is the message I am hitting before my download will complete:
OS does not meet the minimum system requirements for this installer.
10.6.0 is the minimum required for installation.

Hi,
May I know what are you trying to download ?
What is the MAC OS version you are using ?
It seems you are trying to download an application which needs atleast 10.6 MAC version
I think you are using lower version of MAC, let us know the version of your MAC , in order to help better .
To check the version : click on Apple Button on top left
select about this MAC, you will get to know the version over there.
If its something 10.5.x , then you need to upgrade your MAC in order to install that application which needs 10.6 MAC
Thanks,
Baljeet

Error 1335. The cabinet file 'iTunes.cab' required for this installation is

Ah! Please help! I am freaking out because I can not download the new iTunes becasue I get this message...
"Error 1335. The cabinet file 'iTunes.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with the package"
I am trying to download it directly from the site because I tried to play this song in my iTunes and it said it would not play unless I updated my iTunes.. So it took me to the iTunes website and I download it, save the iTunes Setup to my desktop and try to finish downloading or setting it up and at the end I get that message...
What the deuce? Please please please help.
Dominique.
Toshiba... Windows XP Pro

Search your hard drive for that file, 'iTunes.cab', and delete it. It's corrupted, no good.
Then try to install iTunes again.

Oracle Business Approvals For Manager Installation.

I want to install oracle business approvals for manager installation.
Please provide step by step installations document.
Regards,
Kumar V

Hi Kumar;
Please review Steven Chan blog:
https://blogs.oracle.com/stevenChan/entry/oracle_business_approvals_for_managers_iphone_app_now_available
Also see:
http://www.oracle.com/us/products/applications/054244.html
Regard
Helios

How to download packages (Required for 11gR2 Installation)?

Hello
I am not able to download mentioned packages (Required for 11gR2 Installation) Can you Provide link for the same?
SUNWbtool
SUNWhea
SUNWlibC
SUNWlibm
SUNWlibms
SUNWsprot
SUNWtoo
SUNWi1of
SUNWi1cs (ISO8859-1)
SUNWi15cs (ISO8859-15)
SUNWxwfnt
SUNWarc
SUNWcsl
Thanks,
Saurabh

Go examine your Solaris installation DVD.
The packages are there (and should have been installed with a default setup of your OS).

Oracle Client(8.0.5) installation on Linux(6.0)

Please Help,
These are the steps followed in the Oracle
client installation of the Linux
version
1. Loaded SQLNET, TCP/IP Adapter and sqlplus from the Oracle CD for Linux.
2. While running SQLPLUS it gave the 'Missing Library file'
3. Added LD_LIBRARY_PATH parameter to .profile, problem solved.
4. While running SQLPLUS a new message 'Segmentation Fault - Core dumped'
started coming.
After analysing it was observed that none of the Linux memory parametre
required for oracle had been tuned. these parameters are :-
shmmax,shmseg, shmmin, shmmni, semmns, semmni
We know the value of these parameters but the problem is that in linux we
are not able to find the Kernel paramater file,
as we do not know the Kernel parameter file name and the location in which
it is situated.
I have done the configuration of Oracle in Sun Solaris successfully and
also modified the Kernel parameter. the following in the sample data
extracted from the /etc/system file present in Sun Solaris.
set shmsys:shminfo_shmmax=208388608
set shmsys:shminfo_shmseg=15
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=150
set semsys:seminfo_semmns=250
set semsys:seminfo_semmni=100
What I request is that kindly tell me how and where to update the same in
the Linux for installing Oracle Client(8.0.5) on Linux(6.0).Regards And Thanks
Sanjay Kr. Pandey

You'll have to be prepared to wade through and understand the Linux way of recompiling your kernel. The files can be located using the "find" command. There is some great "HOW-TO"s in the Linux RedHat site.
Tip: Be very careful how you answer the "make config" questions because it can mess up the resulting VMLINUZ object. Also, be sure to place secondary entry in your "lilo.conf" to allow you a graceful way of getting back to the old kernel should the new one fail.
Good Luck!

Oracle Client required?

I am running 10gR2 Standard Edition Server on my computer. When I go to install ODT.NET, it want's to install another Oracle Client in a new Oracle Home.
It did the same thing when I loaded the beta of ODT.NET earlier this year. Having two Homes was a pain.
Since I already have all the Oracle Networking I will ever need in my current 10gR2 home, why does ODT require a new Client installation??? I'd rather it just use the home that I already have.
Is there some way to install ODT without creating a new Home?
...don

Mark,
Thanks for the response!
The last time I tried to install ODP, I pointed OUI to my existing Oracle Home, and after the install all my client applications (TOAD, in-house programs, etc) could not find the Oracle DLL's to connect. SqlPlus still worked and my database was still available, but that's all.
So, I've tried installing to a new home and had to deal with two sets of tnsnames.ora's, etc, and I have also tried installing to the existing home but lost my OCI connectability. Apparently I am doing something wrong. Any ideas???
...don

Installing Latest Oracle Client & ODT for Windows 7 64-bit

I have a Windows 7 64-bit. I would think that using 32-bit Java, 32-bit Oracle Client and 32-bit ODAC would work just fine on this operating system. However, I had no luck getting it to run. Here is what I did and a few reasons why I prefer to never work with Oracle products:
Installed 32-bit JDK/JRE (1.6 Update 25)
Installed 32-bit Oracle Client (11g R2) Home 1
Tested connectivity from SQL Developer successfully
Installed 32-bit ODT (11g R3) to Home 1 (installer noted upgrades and new installs)
Failed connectivity from all things windows (ODBC, ADO, ADO.Net)
Uninstalled 32-bit ODT
Failed to uninstall 32-bit Oracle Client Home 1 (oraparam.ini file missing among other issues)
Installed 32-bit Oracle Client (11g R2) Home 2
Failed to uninstall 32-bit Oracle Client Home 1 (told to use deinstall tool)
Failed to uninstall 32-bit Oracle Client Home 2 (told to use deinstall tool)
Failed to run uninstall tool in Home 1 (told to download standalone deinstall tool)
Uninstalled 32-bit Oracle Client Home 2 (completed successfuly with errors - seriously?)
Uninstalled 32-bit Oracle Client Home 1 (completed successfully, but couldn't delete folder)
Oracle.DataAccess and Oracle.Web are still installed in GAC. Uninstall attempts fail (access denied)
Installed 32-bit Oracle Client (11g R2) Home 1
Tested connectivity from SQL Developer successfully
Tested connectivity from .Net 3.5 successfully (using 32-bit 2.0 dll)
Tested connectivity from .Net 4.0 successfully (using 32-bit 2.0 dll)
Does anyone have any suggestions on getting Oracle Data Tools for Windows to work before I try that again?

I realize ODT uses ODP, but installing release 3 upgraded the .Net 2.0 ODP DLLs (which were installed from the Oracle Client 11g Release 2 install) and added the .Net 4.0 DLLs. After that install everything stopped working from Windows land and then it took the better part of two hours to get it back to what it looked like prior to the install. The other thing weird thing I noticed is that although Oracle.DataAccess is registered in the 2.0 GAC I cannot add a reference that way using VS2010. I have to manually add a reference to the file path. Although it still appears I do not have to have the assembly copied locally to run, so the GAC registration seems to be working in that regard.

Oracle client required for Essbase Installation

Similar Messages

Maybe you are looking for