Oracle Cluster Hang after failing a network

Dear,
I have a cluster database on two linux 4.0 servers the oracle version is 10.2. there are two network adapters installed on each machine (private + public).
the problem is when i unplug the network cable from the server (to test the failover), the client failover to the next node, but after some minutes the server hang with no response, so i have to turn it off and restart it.
Appreciate your advise
Talal

Similar Messages

"Oracle Cluster Verification Utility" failed - 10gR2 - VMware - CentOS 4

Hi,
While installing 10g R2 on VMWare with CentOS 4, I am encountering an error:
Command = /u01/crs/oracle/product/10.2.0/crs/bin/cluvfy has failed
INFO: Configuration assistant "Oracle Cluster Verification Utility" failed
*** Starting OUICA ***
Oracle Home set to /u01/crs/oracle/product/10.2.0/crs
Configuration directory is set to /u01/crs/oracle/product/10.2.0/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/crs/oracle/product/10.2.0/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
The logs show me:
COMMAND=/u01/crs/oracle/product/10.2.0/crs/bin/cluvfy stage -post crsinst -n rac1,rac2
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
ERROR:
OCR integrity results are inconsistent amongst the nodes.
OCR integrity found invalid for nodes: rac2
OCR integrity found valid for nodes: rac1
OCR integrity check failed.
I have replaced "clsfmt.bin" with patch 4679769 to avoid the FAILED TO FORMAT OCR DISK USING CLSFMT error on Node 1.
But still the Oracle Cluster Verification Utility failed with OCR integrity.
Also, have religiously followed the steps mentioned in the below link & didnt have any glitches during the entire process:
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
Any Suggestions??

I kinda dont have that timestamp which you requested.
Posting what i have in crsd.log for node 2.
**I wish this site had an attachment section to make the threads more readable.
Anyways...
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2011-06-29 17:56:21.189: [ default][3086931648][ENTER]0
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2004, Oracle. All rights reserved
2011-06-29 17:56:21.189: [ default][3086931648]0CRS Daemon Starting
2011-06-29 17:56:21.190: [ CRSMAIN][3086931648]0Checking the OCR device
2011-06-29 17:56:21.280: [ CRSMAIN][3086931648]0Connecting to the CSS Daemon
2011-06-29 17:56:21.420: [ COMMCRS][66177968]clsc_connect: (0x8655ae0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:21.420: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:21.422: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:22.483: [ COMMCRS][66177968]clsc_connect: (0x8604c10) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:22.484: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:22.485: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:23.537: [ COMMCRS][66177968]clsc_connect: (0x8654e20) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:23.537: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:23.538: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:24.606: [ COMMCRS][66177968]clsc_connect: (0x8655008) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:24.606: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:24.608: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:28.445: [    CRSD][3086931648]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2011-06-29 17:56:28.446: [    CRSD][3086931648]0Active Version and Software Version are same
2011-06-29 17:56:28.446: [ CRSMAIN][3086931648]0Initializing OCR
2011-06-29 17:56:28.479: [ OCRRAW][3086931648]proprioo: for disk 0 (/dev/raw/raw1), id match (1), my id set (1669906634,1028247821) total id sets (1), 1st set (1669906634,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2011-06-29 17:56:28.621: [ CSSCLNT][3051752368]clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
2011-06-29 17:56:29.674: [    CRSD][3086931648]0ENV Logging level for Module: allcomp 0
2011-06-29 17:56:29.680: [    CRSD][3086931648]0ENV Logging level for Module: default 0
2011-06-29 17:56:29.720: [    CRSD][3086931648]0ENV Logging level for Module: COMMCRS 0
2011-06-29 17:56:29.730: [    CRSD][3086931648]0ENV Logging level for Module: COMMNS 0
2011-06-29 17:56:29.746: [    CRSD][3086931648]0ENV Logging level for Module: CRSUI 0
2011-06-29 17:56:29.755: [    CRSD][3086931648]0ENV Logging level for Module: CRSCOMM 0
2011-06-29 17:56:29.760: [    CRSD][3086931648]0ENV Logging level for Module: CRSRTI 0
2011-06-29 17:56:29.770: [    CRSD][3086931648]0ENV Logging level for Module: CRSMAIN 0
2011-06-29 17:56:29.823: [    CRSD][3086931648]0ENV Logging level for Module: CRSPLACE 0
2011-06-29 17:56:29.834: [    CRSD][3086931648]0ENV Logging level for Module: CRSAPP 0
2011-06-29 17:56:29.846: [    CRSD][3086931648]0ENV Logging level for Module: CRSRES 0
2011-06-29 17:56:29.852: [    CRSD][3086931648]0ENV Logging level for Module: CRSOCR 0
2011-06-29 17:56:29.871: [    CRSD][3086931648]0ENV Logging level for Module: CRSTIMER 0
2011-06-29 17:56:29.878: [    CRSD][3086931648]0ENV Logging level for Module: CRSEVT 0
2011-06-29 17:56:29.886: [    CRSD][3086931648]0ENV Logging level for Module: CRSD 0
2011-06-29 17:56:29.904: [    CRSD][3086931648]0ENV Logging level for Module: CLUCLS 0
2011-06-29 17:56:29.916: [    CRSD][3086931648]0ENV Logging level for Module: OCRRAW 0
2011-06-29 17:56:29.928: [    CRSD][3086931648]0ENV Logging level for Module: OCROSD 0
2011-06-29 17:56:29.931: [    CRSD][3086931648]0ENV Logging level for Module: CSSCLNT 0
2011-06-29 17:56:29.936: [    CRSD][3086931648]0ENV Logging level for Module: OCRAPI 0
2011-06-29 17:56:29.939: [    CRSD][3086931648]0ENV Logging level for Module: OCRUTL 0
2011-06-29 17:56:29.942: [    CRSD][3086931648]0ENV Logging level for Module: OCRMSG 0
2011-06-29 17:56:29.945: [    CRSD][3086931648]0ENV Logging level for Module: OCRCLI 0
2011-06-29 17:56:29.948: [    CRSD][3086931648]0ENV Logging level for Module: OCRCAC 0
2011-06-29 17:56:29.951: [    CRSD][3086931648]0ENV Logging level for Module: OCRSRV 0
2011-06-29 17:56:29.954: [    CRSD][3086931648]0ENV Logging level for Module: OCRMAS 0
2011-06-29 17:56:29.954: [ CRSMAIN][3086931648]0Filename is /u01/crs/oracle/product/10.2.0/crs/crs/init/rac2.pid
[ clsdmt][2862934960]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac2DBG_CRSD))
2011-06-29 17:56:29.986: [ CRSMAIN][3086931648]0Using Authorizer location: /u01/crs/oracle/product/10.2.0/crs/crs/auth/
2011-06-29 17:56:30.038: [ CRSMAIN][3086931648]0Initializing RTI
2011-06-29 17:56:30.039: [CRSTIMER][2841689008]0Timer Thread Starting.
2011-06-29 17:56:30.042: [ CRSRES][3086931648]0Parameter SECURITY = 1, running in USER Mode
2011-06-29 17:56:30.043: [ CRSMAIN][3086931648]0Initializing EVMMgr
2011-06-29 17:56:30.045: [ COMMCRS][2831199152]clsc_connect: (0x89a02e0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
2011-06-29 17:56:30.299: [ COMMCRS][2831199152]clsc_connect: (0x89a2ab8) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
2011-06-29 17:56:31.555: [ CRSMAIN][3086931648]0CRSD locked during state recovery, please wait.
2011-06-29 17:56:31.603: [ CRSMAIN][3086931648]0CRSD recovered, unlocked.
2011-06-29 17:56:31.606: [ CRSMAIN][3086931648]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2011-06-29 17:56:31.620: [ CRSMAIN][3086931648]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2011-06-29 17:56:31.627: [ CRSMAIN][3086931648]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=rac2-priv)(PORT=49896))
2011-06-29 17:56:31.627: [ CRSMAIN][3086931648]0Starting Threads
2011-06-29 17:56:31.628: [ CRSMAIN][3086931648]0CRS Daemon Started.
2011-06-29 18:03:02.066: [ CRSRES][2735582128]0Resource Registered: ora.rac1.vip
2011-06-29 18:03:05.949: [ CRSRES][2735582128]0Resource Registered: ora.rac2.vip
2011-06-29 18:03:09.666: [ CRSRES][2735582128]0Resource Registered: ora.rac1.gsd
2011-06-29 18:03:11.523: [ CRSRES][2735582128]0Resource Registered: ora.rac2.gsd
2011-06-29 18:03:13.329: [ CRSRES][2735582128]0Resource Registered: ora.rac1.ons
2011-06-29 18:03:15.048: [ CRSRES][2735582128]0Resource Registered: ora.rac2.ons
2011-06-29 18:03:15.965: [ CRSRES][2714192816]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:03:30.471: [ CRSRES][2714192816]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:03:31.227: [ CRSRES][2714192816]0startRunnable: setting CLI values
2011-06-29 18:03:31.258: [ CRSRES][2714192816]0Attempting to start `ora.rac2.vip` on member `rac2`
2011-06-29 18:03:44.710: [ CRSRES][2714192816]0Start of `ora.rac2.vip` on member `rac2` succeeded.
2011-06-29 18:03:45.588: [ CRSRES][2714192816]0Attempting to start `ora.rac1.gsd` on member `rac1`
2011-06-29 18:03:45.777: [ CRSRES][2714192816]0Start of `ora.rac1.gsd` on member `rac1` succeeded.
2011-06-29 18:03:46.523: [ CRSRES][2714192816]0startRunnable: setting CLI values
2011-06-29 18:03:46.588: [ CRSRES][2714192816]0Attempting to start `ora.rac2.gsd` on member `rac2`
2011-06-29 18:03:47.220: [ CRSRES][2714192816]0Start of `ora.rac2.gsd` on member `rac2` succeeded.
2011-06-29 18:03:48.077: [ CRSRES][2714192816]0Attempting to start `ora.rac1.ons` on member `rac1`
2011-06-29 18:03:49.727: [ CRSRES][2714192816]0Start of `ora.rac1.ons` on member `rac1` succeeded.
2011-06-29 18:03:50.610: [ CRSRES][2714192816]0startRunnable: setting CLI values
2011-06-29 18:03:50.658: [ CRSRES][2714192816]0Attempting to start `ora.rac2.ons` on member `rac2`
2011-06-29 18:03:52.240: [ CRSRES][2714192816]0Start of `ora.rac2.ons` on member `rac2` succeeded.
2011-06-29 18:07:44.810: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:09:05.613: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:09:05.623: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:09:05.623: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:09:05.624: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:09:05.631: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:09:09.437: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:09:09.438: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:09:09.447: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:09:09.685: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:09:22.340: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:10:21.884: [ CRSAPP][2735582128]0CheckResource error for ora.rac2.vip error code = 1
2011-06-29 18:10:21.892: [ CRSRES][2735582128]0In stateChanged, ora.rac2.vip target is ONLINE
2011-06-29 18:10:21.893: [ CRSRES][2735582128]0ora.rac2.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:10:21.893: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:10:21.910: [ CRSRES][2735582128]0Attempting to stop `ora.rac2.vip` on member `rac2`
2011-06-29 18:10:25.645: [ CRSRES][2735582128]0Stop of `ora.rac2.vip` on member `rac2` succeeded.
2011-06-29 18:10:25.645: [ CRSRES][2735582128]0ora.rac2.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:10:25.657: [ CRSRES][2735582128]0ora.rac2.vip failed on rac2 relocating.
2011-06-29 18:10:25.938: [ CRSRES][2735582128]0Attempting to start `ora.rac2.vip` on member `rac1`
2011-06-29 18:10:39.079: [ CRSRES][2735582128]0Start of `ora.rac2.vip` on member `rac1` succeeded.
2011-06-29 18:11:39.443: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:11:52.836: [ OCRUTL][3009792944]u_freem: mem passed is null
2011-06-29 18:12:59.776: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:12:59.784: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:12:59.784: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:12:59.784: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:12:59.791: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:13:03.395: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:13:03.396: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:13:03.404: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:13:03.678: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:13:16.047: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:15:07.356: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:26:36.393: [ CRSAPP][2735582128]0CheckResource error for ora.rac2.vip error code = 1
2011-06-29 18:26:36.404: [ CRSRES][2735582128]0In stateChanged, ora.rac2.vip target is ONLINE
2011-06-29 18:26:36.404: [ CRSRES][2735582128]0ora.rac2.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:26:36.405: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:26:36.420: [ CRSRES][2735582128]0Attempting to stop `ora.rac2.vip` on member `rac2`
2011-06-29 18:26:40.105: [ CRSRES][2735582128]0Stop of `ora.rac2.vip` on member `rac2` succeeded.
2011-06-29 18:26:40.106: [ CRSRES][2735582128]0ora.rac2.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:26:40.114: [ CRSRES][2735582128]0ora.rac2.vip failed on rac2 relocating.
2011-06-29 18:26:40.411: [ CRSRES][2735582128]0Attempting to start `ora.rac2.vip` on member `rac1`
2011-06-29 18:26:53.678: [ CRSRES][2735582128]0Start of `ora.rac2.vip` on member `rac1` succeeded.
2011-06-29 18:28:03.601: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:28:22.695: [ CRSAPP][2735582128]0StartResource error for ora.rac2.vip error code = 1
2011-06-29 18:28:44.847: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:29:06.589: [ OCRUTL][2946853808]u_freem: mem passed is null
2011-06-29 18:30:13.581: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:30:13.598: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:30:13.599: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:30:13.599: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:30:13.606: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:30:17.227: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:30:17.228: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:30:17.236: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:30:17.563: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:30:31.358: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:33:54.570: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:34:17.302: [ OCRUTL][2988813232]u_freem: mem passed is null
2011-06-29 18:35:24.403: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:35:24.412: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:35:24.412: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:35:24.412: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:35:24.431: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:35:28.186: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:35:28.187: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:35:28.208: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:35:28.510: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:35:52.388: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:39:18.464: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:39:31.876: [ OCRUTL][2988813232]u_freem: mem passed is null
2011-06-29 18:40:38.956: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:40:38.965: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:40:38.966: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:40:38.966: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:40:38.972: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:40:42.583: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:40:42.584: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:40:42.594: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:40:42.977: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:41:08.149: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:42:18.061: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:42:31.531: [ OCRUTL][2988813232]u_freem: mem passed is null
2011-06-29 18:44:45.499: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:44:45.507: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:44:45.508: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:44:45.508: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:44:45.516: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:44:49.197: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:44:49.198: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:44:49.209: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:44:49.449: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:45:13.509: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:47:31.668: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:47:50.804: [ CRSAPP][2735582128]0StartResource error for ora.rac1.vip error code = 1

Oracle forms hanging after tabbing off a field

Hi there,
Our application is 10gR2. There are several fields on the form and when the user tabs off a particular field (say TextField1), forms hangs up. TextField1 has a LOV associated but since i am clicking on the button of TextField1, the select statement associated with LOV will not be executed right?
There is no trigger attached to TextField1. This happens only on production and not on development database(replica of production).
Any suggestions for me???
Thanks

the execution plan has nothing to do with tabbing out of a field, it just is determined when the lov-query is executed first.
but the excution plan of a query is based on alot of information, besides the structure of the database (tables, indexes) it depends to a large amount on the statistics gathered in the database. The gathered statistics contain information of the data content of the tables and, and, and..
So if the data in your env-environment is very different from the data in your prod-environment, or even if the last gathering of statistics is long ago in your dev, the execution plan can be completly different in two databases although the structure is the same.
One reason for this problem may be is that in an dev-environment you sometimes have only a "small amount" of data to "save space". This can lead to totally different behaviour between dev-environment and prod-environment.
hope this helps.

Queries on oracle hang after index creation

Hi,
I have a problem where queries issued on an oracle database hang after I create indexes on some of the tables used by these queries.
I have a script where I drop indexes :
DROP INDEX EVP_PCON00_CDSITC_IX;
DROP INDEX EVP_PCS202_STIMP1_IX;
DROP INDEX EVP_PECT00_ONAECT_IX;
DROP INDEX EVP_PVAL01_ONAVAL_IX;
After this script I load data into those tables.
Then I launch another script where I recreate the indexes I just dropped :
CREATE INDEX EVP_PCON00_CDSITC_IX ON EVP_PCON00(CDSITC) TABLESPACE TS_ODS_INDEX;
COMMIT;
CREATE INDEX EVP_PCS202_STIMP1_IX ON EVP_PCS202(STIMP1) TABLESPACE TS_ODS_INDEX;
COMMIT;
CREATE INDEX EVP_PVAL01_CDORIV_IX ON EVP_PVAL01(CDORIV) TABLESPACE TS_ODS_INDEX;
COMMIT;
When the script ends, I try to execute a query using some of the tables I created indexes on :
SELECT ...
FROM ....
WHERE ....
The query never return a result set, it just hangs, I look at the session browser in toad and the scan of the first table used in the query hangs.
When I drop those indexes and re execute the query everything works fine.
Thanks
Edited by: 946359 on Jul 13, 2012 9:20 AM

This is the result I get :
Execution Plan
Plan hash value: 1198043594
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 1343 | 12 (17)| 00:00:01 |
| 1 | HASH UNIQUE | | 1 | 1343 | 12 (17)| 00:00:01 |
|* 2 | HASH JOIN OUTER | | 1 | 1343 | 11 (10)| 00:00:01 |
| 3 | NESTED LOOPS OUTER | | 1 | 1257 | 9 (12)| 00:00:01 |
| 4 | NESTED LOOPS OUTER | | 1 | 1033 | 8 (13)| 00:00:01 |
| 5 | NESTED LOOPS OUTER | | 1 | 809 | 7 (15)| 00:00:01 |
|* 6 | HASH JOIN | | 1 | 585 | 6 (17)| 00:00:01 |
| 7 | NESTED LOOPS | | | | | |
| 8 | NESTED LOOPS | | 1 | 490 | 3 (0)| 00:00:01 |
| 9 | TABLE ACCESS FULL | EVP_PTIP00 | 1 | 452 | 2 (0)| 00:00:01 |
|* 10 | INDEX RANGE SCAN | EVP_PTIC00_CDROLE_IX | 1 | | 1 (0)| 00:00:01 |
|* 11 | TABLE ACCESS BY INDEX ROWID| EVP_PTIC00 | 1 | 38 | 1 (0)| 00:00:01 |
| 12 | TABLE ACCESS FULL | EVP_PTIF00 | 1 | 95 | 2 (0)| 00:00:01 |
|* 13 | TABLE ACCESS BY INDEX ROWID | EVP_PTAB00 | 1 | 224 | 1 (0)| 00:00:01 |
|* 14 | INDEX RANGE SCAN | EVP_PTAB00_CLTABL_IX | 1 | | 1 (0)| 00:00:01 |
|* 15 | TABLE ACCESS BY INDEX ROWID | EVP_PTAB00 | 1 | 224 | 1 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | EVP_PTAB00_CLTABL_IX | 1 | | 1 (0)| 00:00:01 |
|* 17 | TABLE ACCESS BY INDEX ROWID | EVP_PTAB00 | 1 | 224 | 1 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | EVP_PTAB00_CLTABL_IX | 1 | | 1 (0)| 00:00:01 |
| 19 | TABLE ACCESS FULL | EVP_PRIB00 | 1 | 86 | 2 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - access("EVP_PRIB00"."NOTIER"(+)="EVP_PTIP00"."NOTIER")
6 - access("EVP_PTIF00"."NOTIER"="EVP_PTIP00"."NOTIER")
10 - access("EVP_PTIC00"."CDROLE"='EMP')
11 - filter("EVP_PTIC00"."CDDDRX"='CL' AND "EVP_PTIP00"."NOTIER"="EVP_PTIC00"."NOTIER")
13 - filter("EVP_PTAB00_SITF"."CDTABL"(+)="EVP_PTIP00"."CDSITF")
14 - access("EVP_PTAB00_SITF"."CLTABL"(+)='SITF')
15 - filter("EVP_PTAB00_TITR"."CDTABL"(+)="EVP_PTIP00"."CDTITR")
16 - access("EVP_PTAB00_TITR"."CLTABL"(+)='TITR')
17 - filter("EVP_PTAB00_RMAT"."CDTABL"(+)="EVP_PTIP00"."CDRMAT")
18 - access("EVP_PTAB00_RMAT"."CLTABL"(+)='RMAT')

Oracle Cluster Installation

Dear Guru's,
I'm a very beginner for Oracle cluster. i created Public & Private network and SCAN on DNS. I don't know how to create Virtual IP. Please guide me how to create Private IP for Cluster. I created Virtual Private Network. If it is not a worth question kindly excuse me I'm a very begginer.
Thanks for your help and guidance...

Welcome to the forum.
However, it's the wrong forum: notice the title of the forum? This is for SQL and PL/SQL.
I think you want the RAC Installation forum: RAC, ASM & Clusterware Installation

Oracle 11g R2 client installation on Windows 7 64 bit hangs after performing prerequisite checks

Windows 7 Professional SP1 64bit OS
6 GB RAM
380 GB free space
Extracted client to C:\Stage\win64_11gR2_client\client
Ran setup.exe as administrator, but the installation always hangs after step 5 of 7 is completed (Perform Prerequisite checks). Install log ends with entry "INFO: Get view named [SummaryUI]"
What am I missing here? Any help would be greatly appreciated.
C:\Stage\win64_11gR2_client\client>dir
Directory of C:\Stage\win64_11gR2_client\client
06/15/2013 02:56 PM    <DIR>          .
06/15/2013 02:56 PM    <DIR>          ..
06/15/2013 02:56 PM    <DIR>          doc
06/15/2013 02:56 PM    <DIR>          install
06/15/2013 02:56 PM    <DIR>          response
06/15/2013 02:55 PM           341,304 setup.exe
06/15/2013 02:55 PM                56 setup.ini
06/15/2013 02:59 PM    <DIR>          stage
06/15/2013 02:55 PM             4,327 welcome.html
               3 File(s)        345,687 bytes
               6 Dir(s) 412,474,404,864 bytes free
Last few lines of install log:
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@75f0f8ff
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from c:\Stage\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: PATH has :==>C:\Temp\OraInstall2013-06-17_02-55-15PM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\APPS\PuTTY\;C:\Program Files (x86)\IDM Computer Solutions\UltraEdit\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]e4b
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: PN-PC:C:\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:5.9491GB (6238064.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: PN-PC:C:\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:130MB
INFO: Actual Value:384.1495GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:1023
INFO: Actual Value:369
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]

Yes, I've tried using the -jreLoc option but it doesn't seem to like the path.
Version 6.0.200.2 is at C:\Program Files (x86)\Java\jre6\bin
C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\Program Files (x86)\Java\jre6"
Starting Oracle Universal Installer...
Checking monitor: must be configured to display at least 256 colors Higher than 256 .    Actual 4294967296     Passed
Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_04-47-16PM. Please wait ...
The Java RunTime Environment was not found at "C:\Program Files (x86)\Java\jre6"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again
I downloaded a newer version to C:\APPS\Java thinking the space in the path for Program Files (x86) might be a problem, but that also fails with the same error message
Version 7.0.210.11 is at C:\APPS\Java\bin
C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\APPS\Java\"
Starting Oracle Universal Installer...
Checking monitor: must be configured to display at least 256 colors Higher than 256 .    Actual 4294967296     Passed
Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_05-09-13PM. Please wait ...
The Java RunTime Environment was not found at C:APPS\Java"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again

Failed to upgrade Oracle Cluster Registry configuration

I'm making a new installation of Oracle RAC environment, the clusterware version is 10 and therefore the RDBMS, I'm using oracle linux 5 update 7, the installation is being performed on only one machine. The problem occurs at the end of the installation when I try to run / u01/app/oracle/product/10.2.0/crs/root.sh the error messages are:
Failed to upgrade Oracle Cluster Registry configuration, which is issued shortly after the execution of root.sh.
And in the log the error message is:
31/10/2011 11:36:36.654: [OCRCONF] [103401184] ocrconfig starts ...
31/10/2011 11:36:36.654: [OCRCONF] [103401184] Upgrading OCR data
31/10/2011 11:36:36.661: [OCRCONF] [103401184] OCR Already in current version.
31/10/2011 11:36:36.669: [OCRCONF] [103401184] Failed to call clsssinit (21)
31/10/2011 11:36:36.670: [OCRCONF] [103401184] Failed to make a backup copy of OCR
31/10/2011 11:36:36.670: [OCRCONF] [103401184] Exiting [status = failed] ...
If anyone has faced this error and won, I'm accepting suggestions.
Att.
Italo Moisés dos Santos.

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Grid Computing » RAC, ASM & Clusterware Installation which you can get more quick response
Regard
Helios

Oracle SOA Cluster soa-infra failing, startup coherence issues

Hi,
Have a 2 Node cluster od soa 11.1.1.5. Have 3 instances of 2 Node cluster running on the same machine. It's basically one for DEV,*TST*,*UAT* on the same machine. We have cronjobs that run every night shuts down all the cluster instances and then bring them back up. Recently one of our UAT soa cluster having issues. Both the Nodes come up fine but soa-infra in one node is not getting deployed and is down. I tried to manually start that node but no luck these are the errors I am getting in the Node where soa-infra is down. It's been working fine since recently. Any idea what might be wrong and where to look at. Any help is appreciated.
Inside the console all the servers are up and running but when going to Enterprise Manager it shows soa-infra down and only see one node.
####<Nov 28, 2012 11:10:23 PM CST> <Notice> <Stdout> <soadev01> <WLS_SOA1> <Logger@2067016530 3.6.0.4> <<WLS Kernel>> <> <> <1354165823364> <BEA-000000> <bpel.fatal.conection.max.retry is set to 3<Nov 28, 2012 11:10:23 PM CST> <Warning> <Coherence> <BEA-000000> <2012-11-28 23:10:23.360/533.658 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): This Member(Id=0, Timestamp=2012-11-28 23:09:52.784, Address=9.9.10.95:8083, MachineId=3944, Location=site:xxorg.com,machine:web1,process:19968, Role=WeblogicServer) has been attempting to join the cluster using WKA list [web2.xxorg.com/8.8.18.85:8083, web1.xxorg.com/9.9.10.95:8083] for 30 seconds without success; this could indicate a mis-configured WKA, or it may simply be the result of a busy cluster or active failover.>>
####<Nov 28, 2012 11:10:23 PM CST> <Notice> <Stdout> <soadev01> <WLS_SOA1> <Logger@2067016530 3.6.0.4> <<WLS Kernel>> <> <> <1354165823365> <BEA-000000> <<Nov 28, 2012 11:10:23 PM CST> <Warning> <Coherence> <BEA-000000> <2012-11-28 23:10:23.363/533.661 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): Received a discovery message that indicates the presence of an existing cluster that does not respond to join requests; this is usually caused by a network layer failure:
Message "SeniorMemberHeartbeat"
FromMember=Member(Id=1, Timestamp=2012-11-28 21:28:09.017, Address=8.8.18.85:8083, MachineId=3968, Location=site:xxorg.com,machine:web2,process:3396, Role=WeblogicServer)
FromMessageId=0
Internal=false
MessagePartCount=1
PendingCount=0
MessageType=17
ToPollId=0
Poll=null
Packets
    [000]=Broadcast{PacketType=0x0DDF00D2, ToId=0, FromId=1, Direction=Incoming, ReceivedMillis=23:10:23.353, MessageType=17, ServiceId=0, MessagePartCount=1, MessagePartIndex=0, Body=0}
Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}
ToMemberSet=null
NotifySent=false
LastRecvTimestamp=none
MemberSet=MemberSet(Size=1, BitSetCount=1, ids=[1])
}>>
<Nov 28, 2012 11:14:53 PM CST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
     at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
     at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
     Truncated. see log file for complete stacktrace
>
<anonymous>] [ecid: 0000JhFIXrrEWN0pnwh8iZ1Gi2DE000009,0] [APP: soa-infra] Cluster communication initialization failed. If you are using multicast, please make sure multicast is enabled on your network and that there is no interference on the address in use. Please see the documentation for more details.[[
com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
<Nov 29, 2012 9:20:13 PM CST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
)As we have 2 physical machines and have DEV (2-node soa cluster), TST (2-node soa cluster), UAT (2-node soa cluster) all running on the same machines and comes up and down for daily DB maintenance everynight. As it the UAT environment any help appreciated in pointing to tle location to debug.
Also have Unicast operation, and use Well-Known Addressing (WKA) configured in Console under server(s)->start tab. But looks like something with coherence that's not working for the cluster to come up and failing. Here are the unicast coherence settings we have for both servers in the console under Start Server tab as per Oracle EDG
WLS_SOA1
-Dtangosol.coherence.wka1=web1.xxorg.com
-Dtangosol.coherence.wka2=web2.xxorg.com
-Dtangosol.coherence.localhost=web1.xxorg.com
-Dtangosol.coherence.localport=8083
-Dtangosol.coherence.wka1.port=8083
-Dtangosol.coherence.wka2.port=8083
WLS_SOA2
-Dtangosol.coherence.wka1=web1.xxorg.com
-Dtangosol.coherence.wka2=web2.xxorg.com
-Dtangosol.coherence.localhost=web2.xxorg.com
-Dtangosol.coherence.localport=8083
-Dtangosol.coherence.wka1.port=8083
-Dtangosol.coherence.wka2.port=8083Thanks

Hi,
Have a 2 Node cluster od soa 11.1.1.5. Have 3 instances of 2 Node cluster running on the same machine. It's basically one for DEV,*TST*,*UAT* on the same machine. We have cronjobs that run every night shuts down all the cluster instances and then bring them back up. Recently one of our UAT soa cluster having issues. Both the Nodes come up fine but soa-infra in one node is not getting deployed and is down. I tried to manually start that node but no luck these are the errors I am getting in the Node where soa-infra is down. It's been working fine since recently. Any idea what might be wrong and where to look at. Any help is appreciated.
Inside the console all the servers are up and running but when going to Enterprise Manager it shows soa-infra down and only see one node.
####<Nov 28, 2012 11:10:23 PM CST> <Notice> <Stdout> <soadev01> <WLS_SOA1> <Logger@2067016530 3.6.0.4> <<WLS Kernel>> <> <> <1354165823364> <BEA-000000> <bpel.fatal.conection.max.retry is set to 3<Nov 28, 2012 11:10:23 PM CST> <Warning> <Coherence> <BEA-000000> <2012-11-28 23:10:23.360/533.658 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): This Member(Id=0, Timestamp=2012-11-28 23:09:52.784, Address=9.9.10.95:8083, MachineId=3944, Location=site:xxorg.com,machine:web1,process:19968, Role=WeblogicServer) has been attempting to join the cluster using WKA list [web2.xxorg.com/8.8.18.85:8083, web1.xxorg.com/9.9.10.95:8083] for 30 seconds without success; this could indicate a mis-configured WKA, or it may simply be the result of a busy cluster or active failover.>>
####<Nov 28, 2012 11:10:23 PM CST> <Notice> <Stdout> <soadev01> <WLS_SOA1> <Logger@2067016530 3.6.0.4> <<WLS Kernel>> <> <> <1354165823365> <BEA-000000> <<Nov 28, 2012 11:10:23 PM CST> <Warning> <Coherence> <BEA-000000> <2012-11-28 23:10:23.363/533.661 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): Received a discovery message that indicates the presence of an existing cluster that does not respond to join requests; this is usually caused by a network layer failure:
Message "SeniorMemberHeartbeat"
FromMember=Member(Id=1, Timestamp=2012-11-28 21:28:09.017, Address=8.8.18.85:8083, MachineId=3968, Location=site:xxorg.com,machine:web2,process:3396, Role=WeblogicServer)
FromMessageId=0
Internal=false
MessagePartCount=1
PendingCount=0
MessageType=17
ToPollId=0
Poll=null
Packets
    [000]=Broadcast{PacketType=0x0DDF00D2, ToId=0, FromId=1, Direction=Incoming, ReceivedMillis=23:10:23.353, MessageType=17, ServiceId=0, MessagePartCount=1, MessagePartIndex=0, Body=0}
Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}
ToMemberSet=null
NotifySent=false
LastRecvTimestamp=none
MemberSet=MemberSet(Size=1, BitSetCount=1, ids=[1])
}>>
<Nov 28, 2012 11:14:53 PM CST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
     at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
     at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
     Truncated. see log file for complete stacktrace
>
<anonymous>] [ecid: 0000JhFIXrrEWN0pnwh8iZ1Gi2DE000009,0] [APP: soa-infra] Cluster communication initialization failed. If you are using multicast, please make sure multicast is enabled on your network and that there is no interference on the address in use. Please see the documentation for more details.[[
com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
<Nov 29, 2012 9:20:13 PM CST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
)As we have 2 physical machines and have DEV (2-node soa cluster), TST (2-node soa cluster), UAT (2-node soa cluster) all running on the same machines and comes up and down for daily DB maintenance everynight. As it the UAT environment any help appreciated in pointing to tle location to debug.
Also have Unicast operation, and use Well-Known Addressing (WKA) configured in Console under server(s)->start tab. But looks like something with coherence that's not working for the cluster to come up and failing. Here are the unicast coherence settings we have for both servers in the console under Start Server tab as per Oracle EDG
WLS_SOA1
-Dtangosol.coherence.wka1=web1.xxorg.com
-Dtangosol.coherence.wka2=web2.xxorg.com
-Dtangosol.coherence.localhost=web1.xxorg.com
-Dtangosol.coherence.localport=8083
-Dtangosol.coherence.wka1.port=8083
-Dtangosol.coherence.wka2.port=8083
WLS_SOA2
-Dtangosol.coherence.wka1=web1.xxorg.com
-Dtangosol.coherence.wka2=web2.xxorg.com
-Dtangosol.coherence.localhost=web2.xxorg.com
-Dtangosol.coherence.localport=8083
-Dtangosol.coherence.wka1.port=8083
-Dtangosol.coherence.wka2.port=8083Thanks

IPad sync hangs after changing Network Locations

I have a problem where often after I change Network Locations, the next iPad sync will hang in Step 1 of 5 with the progress right under the "e" of Step.
I have let it sit there for hours and it never progresses. I try to eject the iPad, it will never eject it.
I have sort of a formula to recover from this.
* I have to just disconnect the USB cable from the Mac.
* I shut down iTunes.
* I reboot the computer.
* I try to power off the iPad by holding down both buttons.
* It will hang for ever with the little spinning thing going in the middle of the screen.
* I will hold down the both buttons again and it will finally power off the iPad.
* I boot the iPad again.
* I bring up iTunes on the Mac and connect the USB cable and let it try to sync.
* This will fail the first time on Step 5 of 5 with the message "iTunes could not back up the iPad "My's iPad" because an error occurred. OK.
* I click OK.
* I eject the iPad.
* I shutdown iTunes and bring it back up.
* I plug the iPad back in to the MacBook Pro.
Now the iPad will sync and continue to sync normally unless I change my network "Location". Once I change my Network Location there is some probability that iTunes and the iPad will get into this stuck condition.
I've looked at the main console logs and All Messages. I don't see anything obvious.
Is anyone else seeing this behavior?
Does anyone have some hints about how to debug this?
-- Ed

Hi,
Tap Settings / General / Reset / Reset Network Settings.
See if that helps...
Carolyn

10.2.0.1 RHEL 4.0 - root.sh CRS - Failed to upgrade Oracle Cluster Registry

I am trying to install 10.2.0.1 CRS on a 2 node cluster on RHEL 4.0 Nahant Update 7. I get the following errors when root.sh is run
Failed to upgrade Oracle Cluster Registry configuration._
Due to this reason , none of the clusterware background processes fail to start, following which the Configuration Assistant screen also experiences failure (Oracle Notification Server Configuration Assistant).
I tried to apply the 10.2.0.4 patchset also, still same issue. Did anyone see this issue ?
1) We use LINUX DEVICE MAPPER for multipathing and udev
2) We configured the multipathing device partitions and bound them to raw devices
So /dev/mapper/oradisk1 bound to /dev/raw/raw1 ( OCR disk)
and /dev/mapper/oradisk2 bound to /dev/raw/raw2 (VD)
I am able to perform the dd command successfully.
Any ideas ?
-Srinivas

BTW, we our OS is Linux x86-64 with RHEL 4.0 Nahant Update 7. I also applied the patch 4679769.
Did a complete uninstall and reinstall. But issue persists.
-Srinivas

Oracle AS control hangs after user login - AIX 5.3

Hi,
We are engaged with a customer who deploys OracleAS 10.1.2.0.2 on AIX 5.3. After installation, AS control hangs after user logins. This issue is addressed in release note and metalink doc365725.1. We followed the guide in metalink to do the modification and we can access AS control successfully after that. However, due to some other reasons, we restart the AIX, and after that AS control hangs again. This is quite strange. Does anyone meet with this symptom before? How can we resolve this issue?
Thanks in advance.
Sindhiya V.

Thanks everyone for the response and help.
I completed the task yesterday with the permission method. However, I think I found the solution after completion. The trick lies at the oraInst.loc file. It lies at /etc directory for my case (AIX 5.3).
If you do a opatch lsinventory, it shows you the Central Inventory location and the location of orainst.loc. For my case, it is pointing to /oracle/DE1/920_64/inventory. Therefore, even though I am logging in as oraqa1 with all env and oracle settings correct, it still points to DE1 inventory.
I think modifying the Central inventory location in oraInst.loc will solve this problem.

How can I prevent oracle from locking accounts after failed logins?

how can I prevent oracle from locking accounts after failed logins?
Thanks

svarma wrote:
So what is the difference between the profile settings ...FAILED_LOGIN_ATTEMPTS and the parameter settings SEC_MAX_FAILED_LOGIN_ATTEMPTS?
Prior to 11g we only used profiles to control failed_login_attempts.. Then why we need thsi new parameter now?http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/initparams221.htm#I1010274
http://download.oracle.com/docs/cd/E11882_01/server.112/e17222/changes.htm#UPGRD12504
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_6010.htm#SQLRF01310
As documented ...
FAILED_LOGIN_ATTEMPTS is a property of a profile, and will lock an account
SEC_MAX_FAILED_LOGIN_ATTEMPTS is an initialization parameter and will drop a connection but says nothing about locking accounts.

Oracle AS - DB Console fails to start after AS install

Hi,
I got an error message at the time of Oracle AS Infra install that setup failed to start the DB Console during DB Configuration assistant run. Also, Oracle AS - DB Console fails to start after the AS install? Any suggestion / remedies would be of help.

hi,
follow this metalink note you will find out the answer
Troubleshooting Database Control Startup Issues
Doc ID: Note:549079.1
Thanks,

RAC - Oracle Grid Infrastructure configure failed

Hi, am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.
[root@bsfrac01 grid]# sh root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-02-13 00:11:55: Parsing the host name
2011-02-13 00:11:55: Checking for super user privileges
2011-02-13 00:11:55: User has super user privileges
Using configuration parameter file: /u01/app/11.2/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'bsfrac01'
CRS-2672: Attempting to start 'ora.mdnsd' on 'bsfrac01'
CRS-2676: Start of 'ora.mdnsd' on 'bsfrac01' succeeded
CRS-2676: Start of 'ora.gipcd' on 'bsfrac01' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'bsfrac01'
CRS-2676: Start of 'ora.gpnpd' on 'bsfrac01' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'bsfrac01'
CRS-2676: Start of 'ora.cssdmonitor' on 'bsfrac01' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'bsfrac01'
CRS-2672: Attempting to start 'ora.diskmon' on 'bsfrac01'
CRS-2676: Start of 'ora.diskmon' on 'bsfrac01' succeeded
CRS-2676: Start of 'ora.cssd' on 'bsfrac01' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'bsfrac01'
CRS-2676: Start of 'ora.ctssd' on 'bsfrac01' succeeded
ASM created and started successfully.
DiskGroup DATA1 created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'bsfrac01'
CRS-2676: Start of 'ora.crsd' on 'bsfrac01' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 0ea2052d8a714fd7bf46d9d5c785483e.
Successfully replaced voting disk group with +DATA1.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 0ea2052d8a714fd7bf46d9d5c785483e (ORCL:DISK1) [DATA1]
Located 1 voting disk(s).
*Failed to rmtcopy "/tmp/filekRIMbG" to "/u01/app/11.2/grid/gpnp/manifest.txt" for nodes {bsfrac01,bsfrac02}, rc=256*
*Failed to rmtcopy "/u01/app/11.2/grid/gpnp/bsfrac01/profiles/peer/profile.xml" to "/u01/app/11.2/grid/gpnp/profiles/peer/profile.xml" for nodes {bsfrac01,bsfrac02}, rc=256*
rmtcopy aborted
Failed to promote local gpnp setup to other cluster nodes
CRS-2673: Attempting to stop 'ora.crsd' on 'bsfrac01'
CRS-2677: Stop of 'ora.crsd' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'bsfrac01'
CRS-2677: Stop of 'ora.asm' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'bsfrac01'
CRS-2677: Stop of 'ora.ctssd' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'bsfrac01'
CRS-2677: Stop of 'ora.cssdmonitor' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'bsfrac01'
CRS-2677: Stop of 'ora.cssd' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'bsfrac01'
CRS-2677: Stop of 'ora.gpnpd' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'bsfrac01'
CRS-2677: Stop of 'ora.gipcd' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'bsfrac01'
CRS-2677: Stop of 'ora.mdnsd' on 'bsfrac01' succeeded
Initial cluster configuration failed. See /u01/app/11.2/grid/cfgtoollogs/crsconfig/rootcrs_bsfrac01.log for details
[root@bsfrac01 grid]#
[oracle@bsfrac01 bin]$ ./cluvfy stage -post crsinst -n bsfrac01,bsfrac02 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "bsfrac01"
Destination Node Reachable?
bsfrac01 yes
bsfrac02 yes
Result: Node reachability check passed from node "bsfrac01"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
bsfrac01 passed
bsfrac02 passed
Result: User equivalence check passed for user "oracle"
ERROR:
PRKC-1094 : Failed to retrieve the active version of crs: {0}
Checking time zone consistency...
Time zone consistency check passed.
ERROR:
PRKC-1093 : Failed to retrieve the version of crs software on node "java.io.IOException: /u01/app/11.2.0/grid/bin/crsctl: not found
" : {1}
ERROR:
Cluster manager integrity check failed
PRVF-5434 : Cannot identify the current CRS software version
UDev attributes check for OCR locations started...
Result: UDev attributes check passed for OCR locations
UDev attributes check for Voting Disk locations started...
ERROR:
PRVF-5197 : Failed to retrieve voting disk locationsPRKC-1092 : Failed to retrieve the location of votedisks: java.io.IOException: /u01/app/11.2.0/grid/bin/crsctl: not found
Result: UDev attributes check failed for Voting Disk locations
Check default user file creation mask
Node Name Available Required Comment
bsfrac01 0022 0022 passed
bsfrac02 0022 0022 passed
Result: Default user file creation mask check passed
Checking cluster integrity...
Node Name
bsfrac01
Cluster integrity check failed This check did not run on the following node(s):
bsfrac02
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations
ERROR:
PRKC-1094 : Failed to retrieve the active version of crs: {0}
ERROR:
PRVF-5300 : Failed to retrieve active version for CRS on this node
OCR integrity check failed
Checking CRS integrity...
ERROR:
PRKC-1094 : Failed to retrieve the active version of crs: {0}
ERROR:
PRVF-5300 : Failed to retrieve active version for CRS on this node
CRS integrity check failed
OCR detected on ASM. Running ACFS Integrity checks...
Starting check to see if ASM is running on all cluster nodes...
PRVF-5137 : Failure while checking ASM status on node "bsfrac01"
PRVF-5137 : Failure while checking ASM status on node "bsfrac02"
Starting Disk Groups check to see if at least one Disk Group configured...
PRVF-5112 : An Exception occurred while checking for Disk Groups
PRVF-5114 : Disk Group check failed. No Disk Groups configured
Task ACFS Integrity check failed
Checking Oracle Cluster Voting Disk configuration...
ERROR:
PRKC-1093 : Failed to retrieve the version of crs software on node "java.io.IOException: /u01/app/11.2.0/grid/bin/crsctl: not found
" : {1}
ERROR:
PRVF-5434 : Cannot identify the current CRS software version
PRVF-5431 : Oracle Cluster Voting Disk configuration check failed
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
bsfrac01 does not exist passed
bsfrac02 does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@bsfrac01 bin]$ /u01/app/11.2/grid/bin/ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 3
Total space (kbytes) : 262120
Used space (kbytes) : 408
Available space (kbytes) : 261712
ID : 1671840043
Device/File Name : +DATA1
Device/File integrity check succeeded
Device/File not configured
Device/File not configured
Device/File not configured
Device/File not configured
Cluster registry integrity check succeeded
Logical corruption check bypassed due to non-privileged user
ASM looks to be up and running..
[oracle@bsfrac01 bin]$ /usr/sbin/oracleasm listdisks
DISK1
DISK2
DISK3
DISK4
DISK5
DISK6
[oracle@bsfrac01 bin]$ /usr/sbin/oracleasm status
Checking if ASM is loaded: yes
Checking if /dev/oracleasm is mounted: yes
Please help.

before installation have u configure the private interconnect on both the nodes to same network adapter..
for example on node 1 if the private interconnect is on eth0 then on the node 2 it should use eth0 only...
for private interconnect use the hostonly option on both the nodes in the network configuration page of the vmware or virtual box..
and for public network it can be bridged
more over if you are installing on the laptop its good to configure the SSH using the OUI.. rather than doing it manually.. as it saves time
the private and the public networks should not have same range of ip address. like if public address are like 192.168.2.222/255.255.255.0 and private address have to be different like 10.10.1.2/255.0.0.0 (this is just an example)
have to configured the NTP.
any ways try installing the oracle rac on virtual box follow the steps given the below website they are pretty straight forward...
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php

Oracle cluster installation problem

hi forums
i need experienced one to discuss with me about this problem and help me to put plan
i install oracle cluster ware 10.2 on my lab
first i install VMWare Workstation 6.5-7x
and i install windows server 2003 and do this configuration
-create 4 scsi harad with size 10 G
-create 5 scsi hard with size 1 g ( 3 for voting dist - 2 for OCR)
- enable automount for windows
- disable sense for new Network card
- 2 network card for public and other for private
- identifying network nodes in the host file
- rename this machin by rac1
- colne this machine and rename it to rac2 and change the public and private ip
----- now i have tow machine rac1,rac2
- check from rac1
cluster media\ckuvfy\runcluvfu.bat stage -pre crsinst -n rac1,rac2 -verbose
was successful
cluster media\ckuvfy\runcluvfu.bat comp ssa -n rac1,rac2
was sc\uccessful
and another check ......................
i begin installing oracle cluster ware
no problem
but after installing on creating cluster configuration assistant it was failed
the question is why this error happen ,although i check on any thing before install !?
i reed more and more and i found this problem happen because terminal service
use this commend
mstsc -v:servername /f - console
but i install local not remote
if any exprince with this please show to me why this error happen !?*
and what is the solution ?
for oracle rac in windows what is the best use VMWare or windows alone ?

Hi,
Check the below link to match your steps and verify according:
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
For practise and test purpose VMWARE is definetly a better choice.Check the below link which can help
you why it is better to use VMWARE.
http://blogs.vmware.com/performance/2007/11/ten-reasons-why.html
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

Oracle Cluster Hang after failing a network

Similar Messages

Maybe you are looking for