Oracle Cluster monitoring

Hi,
Does any one know GUI tools which can monitor Cluster Health except GRID?
thanks

Spotlight from Quest Software Inc
Edited by: user130038 on Aug 18, 2011 10:33 AM
http://www.quest.com/spotlight-on-oracle/

Similar Messages

  • Oracle Cluster Health Monitor

    How many people use the Oracle Cluster Health Monitor and is it recommended?
    http://www.oracle.com/technetwork/database/clustering/downloads/ipd-download-homepage-087212.html
    According to the FAQ it is integrated into 11.2.0.2 - Cluster Health Monitor (CHM) FAQ [ID 1328466.1]

    I would look in the installation directories for an HTML file for the documentation. One of the download ZIP files for CHM contains a file named chm_os_useman.html. I don't know if this is the same file that might exist in your installation, but it is worth a look.

  • Oracle Clustre, Oracle Cluster with RAC and Oracle 10g

    Is there a difference between Oracle Cluster and Oracle Cluster with RAC? Please explain. Do existing database codes run unmodified in Cluster or Cluster with RAC environment? What needs to be modified to make existing SQL codes RAC-aware. How to achieve 'all automatic' in case of failure and resubmission of Queries from failed instance to a running instance?
    In 10g environment, do we need to consider licensing of RAC as a separate product? What are additional features one derives in 10g that is not in Cluster +RAC?
    Your comments and pointers to comparison study and pictorial clarification will be very helpful.

    Oracle cluster like failsafe before or Veritas Cluster or other vendor's cluster is meant for HA (high availability) purpose. Which 2 nodes or more can see a shared disk with 1 active node. Whenever this active node failed through heartbeat other machine will know and will take the database over from there.
    Oracle RAC is more for HA and load balance. In Oracle RAC 2 or more nodes are accessing the database at the same time so it spread load across all these nodes.
    I believe Oracle 10g RAC still need seperate license for it. But you need to call Oracle or check the production document to verify it.
    Oracle 10g besides improvement in RAC. It's main improvement is on the build in management of the database itself. It can monitored and selftune itself to much furthur level then before and give DBA much more information to determine the cause of the problem as well. Plus improvement on lots of utility as well like RMAN , data pump etc... I don't want to get into too much detail on this you can check on their 10g new features for more detail view.
    Hope this help. :)

  • Error while checking the status of Oracle Cluster ware

    Hi
    I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
    -bash-3.2$ ./crsctl stat res -t
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4000: Command Status failed, or completed with errors.
    -bash-3.2$
    But when I ran below one:
    -bash-3.2$ ./crsctl stat res -t -init
    NAME TARGET STATE SERVER STATE_DETAILS
    Cluster Resources
    ora.asm
    1 ONLINE ONLINE sfv9699 Started
    ora.cluster_interconnect.haip
    1 ONLINE ONLINE sfv9699
    ora.crf
    1 ONLINE ONLINE sfv9699
    ora.crsd
    1 ONLINE OFFLINE
    ora.cssd
    1 ONLINE ONLINE sfv9699
    ora.cssdmonitor
    1 ONLINE ONLINE sfv9699
    ora.ctssd
    1 ONLINE ONLINE sfv9699 OBSERVER
    ora.diskmon
    1 OFFLINE OFFLINE
    ora.drivers.acfs
    1 ONLINE ONLINE sfv9699
    ora.evmd
    1 ONLINE INTERMEDIATE sfv9699
    ora.gipcd
    1 ONLINE ONLINE sfv9699
    ora.gpnpd
    1 ONLINE ONLINE sfv9699
    ora.mdnsd
    1 ONLINE ONLINE sfv9699
    So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
    Alert <server_name>.log
    2012-10-20 15:37:51.408
    [ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
    2012-10-20 15:37:52.968
    [crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
    2012-10-20 15:37:52.984
    [crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    ]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
    2012-10-20 15:37:53.471
    [ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
    2012-10-20 15:37:53.472
    [ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
    CRSD.log
    2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
    2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
    [   CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
    2012-10-20 15:37:52.897: [  OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
    [  OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
    2012-10-20 15:37:52.898: [  OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.967: [  OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
    2012-10-20 15:37:52.967: [  OCRASM][3563381328]proprasmo: The ASM instance is down
    2012-10-20 15:37:52.968: [  OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
    2012-10-20 15:37:52.968: [  OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
    2012-10-20 15:37:52.968: [  OCRASM][3563381328]proprasmcl: asmhandle is NULL
    2012-10-20 15:37:52.969: [    GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
    2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
    2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
    2012-10-20 15:37:52.978: [  OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
    2012-10-20 15:37:52.981: [  OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
    2012-10-20 15:37:52.981: [  OCRRAW][3563381328]proprinit: Could not open raw device
    2012-10-20 15:37:52.981: [  OCRASM][3563381328]proprasmcl: asmhandle is NULL
    2012-10-20 15:37:52.983: [  OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
    2012-10-20 15:37:52.984: [  CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.984: [    CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
    2012-10-20 15:37:52.984: [    CRSD][3563381328] Done.
    =======================
    I see in the above log that saying ASM instance is down and failed to open +DATA .
    But the asm instance up and running
    SQL> select instance_name,status from v$instance;
    INSTANCE_NAME STATUS
    +ASM1            STARTED
    And we havent created any disk named DATA before the installation. We have created only below two disks
    SQL> select name,header_status from v$asm_disk;
    NAME HEADER_STATUS
    ASM_DATA MEMBER
    FLASH_RECOVERY MEMBER
    But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
    SQL> select name,state from v$asm_diskgroup;
    NAME STATE
    DATA MOUNTED
    Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
    [root@SFV9699 bin]# oracleasm listdisks
    ASM_DATA
    FLASH_RECOVERY
    Seems like its trying to read the old disk DATA.
    we have done asmscanning too with oracleasm scan disks. but no use.
    Where I can remove the old entry of DATA disk.
    It would be a great if a quick response get.
    Thanks
    SHIYAS M

    The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
    2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
    [ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
    2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
    2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
    2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
    2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
    2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
    2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
    The only disks created are
    [root@SFV9699 dev]# oracleasm listdisks
    ASM_DATA
    FLASH_RECOVERY
    And these disks are showing part of that group also.. Not quite sure how this happened..
    what abt dropping this group.. will anything work.

  • Error while installing Oracle Cluster Ready Services – Release 1 (10.1.0.2)

    Hi all,
    I am trying for RAC – 10gR1 (10.1.0.2) using two machines with Windows 2000 Server. For this I need to install Oracle Cluster Ready Services – Release 1 (10.1.0.2).
    Machine details are as follows:-
    Node 1:
    Computer Name:     RAC1
    Windows 2000 IP Configuration
    Ethernet adapter Local Area Connection 2: (Used for Public Interface)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 192.168.1.65
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 10.10.10.11
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Node 2:
         Computer Name:     RAC2
    Windows 2000 IP Configuration
    Ethernet adapter Local Area Connection 2: (Used for Public Interface)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 192.168.1.181
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 10.10.10.12
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    I have made following entries in Hosts file of both the machines:-
    192.168.1.65     RAC1
    192.168.1.181     RAC2
    10.10.10.11     RAC01-PRIV
    10.10.10.12     RAC02-PRIV
    192.168.1.201     RAC01-VIP
    192.168.1.202     RAC02-VIP
    I have completed all the pre-installation steps, i.e. configuring the disk for storage, and both the machine are communicating each other through there Private and Public interfaces. Now the problem appears when I am installing Oracle Cluster Ready Services, at the end of Installation following message appears and the auto configuration steps fails.
    ================================================================================================================
    Output generated from configuration assistant "Oracle Cluster Ready Services Configuration Assistant":
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 1: rac1 rac01-priv rac1
    node 2: rac2 rac02-priv rac2
    Creating OCR keys for user 'administrator', privgrp ''..
    Operation successful.
    Now formatting voting device: \\.\votedsk
    Successful in setting block0 for voting disk.
    Format complete.
    Step 1: checking status of CRS cluster
    Step 2: configuring OCR repository
    Step 3: configuring safe mode for CRS stack
    Step 4: Starting up CRS stack on all nodes
    RAC1 service OracleCSService in improper PENDING state, err(997)
    RAC2 service OracleCSService in improper PENDING state, err(997)
    Configuration assistant "Oracle Cluster Ready Services Configuration Assistant" failed
    ================================================================================================================
    Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
    Configuration assistant "Oracle Notification Server Configuration Assistant" failed
    ================================================================================================================
    Output generated from configuration assistant "Oracle Private Interconnect Configuration Assistant":
    PRIF-10: failed to initialize the cluster registry
    Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
    ===============================================================
    I would be highly obliged if any one tell me why it is happing like this and what could be the possible remedy.
    Waiting for the respone.
    With Regards
    Dinesh
    [email protected]

    Hi user478171,
    I have the same problem with two nodes in Windows 2003 with RAC 10g R2, but I don't have idea to solve.
    Please advice me
    Thanks advances
    regards,
    IvanR

  • How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

    How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
    How many database will play in this role.
    Best,

    hello
    I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
    Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
    And, can you pls elaborate on this point
    e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
    Pls send me the details at [email protected] or you can contact me at 08054641476.
    Thanks in advance.

  • Oracle cluster installation problem

    hi forums
    i need experienced one to discuss with me about this problem and help me to put plan
    i install oracle cluster ware 10.2 on my lab
    first i install VMWare Workstation 6.5-7x
    and i install windows server 2003 and do this configuration
    -create 4 scsi harad with size 10 G
    -create 5 scsi hard with size 1 g ( 3 for voting dist - 2 for OCR)
    - enable automount for windows
    - disable sense for new Network card
    - 2 network card for public and other for private
    - identifying network nodes in the host file
    - rename this machin by rac1
    - colne this machine and rename it to rac2 and change the public and private ip
    ----- now i have tow machine rac1,rac2
    - check from rac1
    cluster media\ckuvfy\runcluvfu.bat stage -pre crsinst -n rac1,rac2 -verbose
    was successful
    cluster media\ckuvfy\runcluvfu.bat comp ssa -n rac1,rac2
    was sc\uccessful
    and another check ......................
    i begin installing oracle cluster ware
    no problem
    but after installing on creating cluster configuration assistant it was failed
    the question is why this error happen ,although i check on any thing before install  !?
    i reed more and more and i found this problem happen because terminal service
    use this commend
    mstsc -v:servername /f - console
    but i install local not remote
    if any exprince with this please show to me why this error happen !?*
    and what is the solution ?
    for oracle rac in windows what is the best use VMWare or windows alone ?

    Hi,
    Check the below link to match your steps and verify according:
    http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
    For practise and test purpose VMWARE is definetly a better choice.Check the below link which can help
    you why it is better to use VMWARE.
    http://blogs.vmware.com/performance/2007/11/ten-reasons-why.html
    Best regards,
    Rafi.
    http://rafioracledba.blogspot.com/

  • 10.2.0.1 RHEL 4.0 - root.sh CRS - Failed to upgrade Oracle Cluster Registry

    I am trying to install 10.2.0.1 CRS on a 2 node cluster on RHEL 4.0 Nahant Update 7. I get the following errors when root.sh is run
    Failed to upgrade Oracle Cluster Registry configuration._
    Due to this reason , none of the clusterware background processes fail to start, following which the Configuration Assistant screen also experiences failure (Oracle Notification Server Configuration Assistant).
    I tried to apply the 10.2.0.4 patchset also, still same issue. Did anyone see this issue ?
    1) We use LINUX DEVICE MAPPER for multipathing and udev
    2) We configured the multipathing device partitions and bound them to raw devices
    So /dev/mapper/oradisk1 bound to /dev/raw/raw1 ( OCR disk)
    and /dev/mapper/oradisk2 bound to /dev/raw/raw2 (VD)
    I am able to perform the dd command successfully.
    Any ideas ?
    -Srinivas

    BTW, we our OS is Linux x86-64 with RHEL 4.0 Nahant Update 7. I also applied the patch 4679769.
    Did a complete uninstall and reinstall. But issue persists.
    -Srinivas

  • Where do I find 'MQ Cluster Monitor' and 'Message Queue Universal Client' ?

    This video on mq.dev.java.net uses two utilities called the 'MQ Cluster Monitor' and the 'Message Queue Universal Client'. The narrator says that these are 'shipped with the Message Queue product'.
    I dont see the utilities in my Open MQ installation. What am I missing ?
    - Hemant Bedekar
    RedSeal Solutions

    Cluster Monitor can be launched by typing these commands -
         cd /MessageQueue/mq/examples/jmx
         java -classpath /MessageQueue/mq/lib/imqjmx.jar:. MQClusterMonitor
    Universal Client can be launched by typing these commands -
         cd /MessageQueue/mq/examples/applications/uclient
         java -classpath /MessageQueue/mq/lib/imqjmx.jar:. UniversalClient
    - Hemant Bedekar
    RedSeal Solutions

  • Oracle Workflow Monitor

    I've seen plenty of references to Oracle Workflow Monitor, but I've never paid much attention. Yesterday I got an error message from Control Center that instructed me to use Oracle Workflow Monitor to solve my problem (a process was running and needed to be shut down before regenerating).
    But how to I use Oracle Workflow Monitor? Is it installed by default when OWF was initially installed with OWB? What URL do I use access it? If it does not run after the conventional OWB install, is there a How-To document available for configuring it?
    To be clear, OWF seems to be set up and working. I have created and run process flows successfully. I've just experienced a weird problem that Control Center cannot seem to handle -- and I'm looking for answers. Frankly, I'm mystified at the lack of information on Oracle Workflow Monitor given that OWB error messages reference it and plenty of people seem to discuss it in technical forums.
    Thanks,
    David

    Thanks Robert!
    We are using OWB 11 on Oracle 11, but I'm going to press on and ask our DBA to install the OWF mid-tier components from the 10g Companioin CD. I don't think workflow has changed and so I'm hopeful.
    (If anybody has experience, please chime in for the record.)
    Thanks again!
    -David

  • Oracle Cluster and libnnz10 problem - SOLVED!

    Hi to all
    I have some machines (XServe) with OSX 10.4.9 and Oracle 10.1.0.3.
    In all the machines I follow the instructions find in this forum (the relink libnnz10.dylib trick) and all the databases runs very well.
    Now I'm trying to instal two machines in cluster mode.
    The node 1 is a clean machine. The node 2 is a machine that has a Oracle single instance running.
    All the installation in cluster mode runs smooth and I made the same things that in a single instance (like the relink trick).
    With all installed, the CRS daemon is running and the listeners is running (I run NETCA before runnig DBCA).
    Using the DBCA works fine until the last step - for the database creation, the last script has a shutdown/startup command to run a full recompile of all packages and procedures in the database.
    At this moment the installation fails (with end-of-communication channel). Looking in the logs, this is the _dyld libnnz10.dylib error.
    Even after the crash in installation, I quit the DBCA and runs SQLPLUS. I connect in the database, try a startup (that fails with the error mentioned), reconnect again and make two commands : alter database mount; alter database open; (and it works).
    I do this in the two nodes and the CRS daemon recognizes the running instances (with crs_stat -t I can see all online) and the database is running and in cluster (what I do in one instance appears in the other and the datafiles are the same), including failover tasks (like simulating a node down - the database still running).
    But all tries to run the startup/shutdown commands fails. It fails always when the LMON processes try to start.
    I recheck the installation, focusing in the relink trick with the libnnz10. When I use DBCA to install a single instance on node 1 or node 2 in the same ORACLE_HOME of the cluster, it runs fine (including startup/shutdown) - this make me think that all the database relink's are fine.
    I try to relink the cluster. In installation it uses 4 makes and I redo this makes without the libnnz10. The makes runs well too, but the error continues (only using startup/shutdown in cluster database).
    I'm doing the documentation of the process and will post it, but I want to resolve this issue.
    Any ideas ?
    Thanks to all
    Message was edited by:
    alliance01

    Hi to all.
    I downloaded the 10.1.0.5 as soon I can - thanks to damjanp!
    After the download, I follow all the instructions.
    I stop the database, all the services and the cluster. Run the installer and it works fine.
    When I try to make the post-installation tasks, I cannot startup the database (nor with the error that I was having). I received a Oracle Cluster Configuration Error...
    I read all the logs and find 3 errors. I do not know if this occurs because of wrong environment variables.
    The commands awk, touch and basename fails - the scripts try to find this commands in /bin (this commands in OSX stay in /usr/bin). I prefer make a link (ln -s) using root :
    ln -s /usr/bin/awk /bin/awk
    ln -s /usr/bin/touch /bin/touch
    ln -s /usr/bin/basename /bin/basename
    When I done this, the cluster starts (ocssd.bin, crsd.bin e evmd.bin). But when I try to start the database, it fails (ORA-29702 : error occurred in Cluster Group Service operation) and srvctl gives me PRKH-1010 : Unable to communicate with CRS services. [OCR Error(Native : prsr_initCLSS:[21])].
    To resolve this I use localconfig (user root) :
    localconfig reset /<ORACLE_HOME>
    After this, I shutdown all and restart the CRS services - and for my surprise the CRS automaticaly starts all the services (including the instances).
    And the libnnz10 problema was gone!
    I read the documentation and found that the "TNS - lost contact" problem in Tiger (yeah - Tiger) was resolved.
    I think that 10.1.0.5 can runs on Tiger more easily.
    The cluster are running fine now - I shutdown/startup the instance several times to test with no errors.
    I will prepare a documentation to post in the Web about this installation. When I finish I post in this forum the link.
    Thank's to all.

  • "Oracle Cluster Verification Utility" failed - 10gR2 - VMware - CentOS 4

    Hi,
    While installing 10g R2 on VMWare with CentOS 4, I am encountering an error:
    Command = /u01/crs/oracle/product/10.2.0/crs/bin/cluvfy has failed
    INFO: Configuration assistant "Oracle Cluster Verification Utility" failed
    *** Starting OUICA ***
    Oracle Home set to /u01/crs/oracle/product/10.2.0/crs
    Configuration directory is set to /u01/crs/oracle/product/10.2.0/crs/cfgtoollogs. All xml files under the directory will be processed
    INFO: The "/u01/crs/oracle/product/10.2.0/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.
    INFO: User Selected: Yes/OK
    The logs show me:
    COMMAND=/u01/crs/oracle/product/10.2.0/crs/bin/cluvfy stage -post crsinst -n rac1,rac2
    Checking the version of OCR...
    OCR of correct Version "2" exists.
    Checking data integrity of OCR...
    ERROR:
    OCR integrity results are inconsistent amongst the nodes.
    OCR integrity found invalid for nodes: rac2
    OCR integrity found valid for nodes: rac1
    OCR integrity check failed.
    I have replaced "clsfmt.bin" with patch 4679769 to avoid the FAILED TO FORMAT OCR DISK USING CLSFMT error on Node 1.
    But still the Oracle Cluster Verification Utility failed with OCR integrity.
    Also, have religiously followed the steps mentioned in the below link & didnt have any glitches during the entire process:
    http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
    Any Suggestions??

    I kinda dont have that timestamp which you requested.
    Posting what i have in crsd.log for node 2.
    **I wish this site had an attachment section to make the threads more readable.
    Anyways...
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
    2011-06-29 17:56:21.189: [ default][3086931648][ENTER]0
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2004, Oracle. All rights reserved
    2011-06-29 17:56:21.189: [ default][3086931648]0CRS Daemon Starting
    2011-06-29 17:56:21.190: [ CRSMAIN][3086931648]0Checking the OCR device
    2011-06-29 17:56:21.280: [ CRSMAIN][3086931648]0Connecting to the CSS Daemon
    2011-06-29 17:56:21.420: [ COMMCRS][66177968]clsc_connect: (0x8655ae0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
    2011-06-29 17:56:21.420: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
    2011-06-29 17:56:21.422: [  CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2011-06-29 17:56:22.483: [ COMMCRS][66177968]clsc_connect: (0x8604c10) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
    2011-06-29 17:56:22.484: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
    2011-06-29 17:56:22.485: [  CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2011-06-29 17:56:23.537: [ COMMCRS][66177968]clsc_connect: (0x8654e20) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
    2011-06-29 17:56:23.537: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
    2011-06-29 17:56:23.538: [  CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2011-06-29 17:56:24.606: [ COMMCRS][66177968]clsc_connect: (0x8655008) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
    2011-06-29 17:56:24.606: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
    2011-06-29 17:56:24.608: [  CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2011-06-29 17:56:28.445: [    CRSD][3086931648]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
    2011-06-29 17:56:28.446: [    CRSD][3086931648]0Active Version and Software Version are same
    2011-06-29 17:56:28.446: [ CRSMAIN][3086931648]0Initializing OCR
    2011-06-29 17:56:28.479: [  OCRRAW][3086931648]proprioo: for disk 0 (/dev/raw/raw1), id match (1), my id set (1669906634,1028247821) total id sets (1), 1st set (1669906634,1028247821), 2nd set (0,0) my votes (2), total votes (2)
    2011-06-29 17:56:28.621: [ CSSCLNT][3051752368]clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
    2011-06-29 17:56:29.674: [    CRSD][3086931648]0ENV Logging level for Module: allcomp 0
    2011-06-29 17:56:29.680: [    CRSD][3086931648]0ENV Logging level for Module: default 0
    2011-06-29 17:56:29.720: [    CRSD][3086931648]0ENV Logging level for Module: COMMCRS 0
    2011-06-29 17:56:29.730: [    CRSD][3086931648]0ENV Logging level for Module: COMMNS 0
    2011-06-29 17:56:29.746: [    CRSD][3086931648]0ENV Logging level for Module: CRSUI 0
    2011-06-29 17:56:29.755: [    CRSD][3086931648]0ENV Logging level for Module: CRSCOMM 0
    2011-06-29 17:56:29.760: [    CRSD][3086931648]0ENV Logging level for Module: CRSRTI 0
    2011-06-29 17:56:29.770: [    CRSD][3086931648]0ENV Logging level for Module: CRSMAIN 0
    2011-06-29 17:56:29.823: [    CRSD][3086931648]0ENV Logging level for Module: CRSPLACE 0
    2011-06-29 17:56:29.834: [    CRSD][3086931648]0ENV Logging level for Module: CRSAPP 0
    2011-06-29 17:56:29.846: [    CRSD][3086931648]0ENV Logging level for Module: CRSRES 0
    2011-06-29 17:56:29.852: [    CRSD][3086931648]0ENV Logging level for Module: CRSOCR 0
    2011-06-29 17:56:29.871: [    CRSD][3086931648]0ENV Logging level for Module: CRSTIMER 0
    2011-06-29 17:56:29.878: [    CRSD][3086931648]0ENV Logging level for Module: CRSEVT 0
    2011-06-29 17:56:29.886: [    CRSD][3086931648]0ENV Logging level for Module: CRSD 0
    2011-06-29 17:56:29.904: [    CRSD][3086931648]0ENV Logging level for Module: CLUCLS 0
    2011-06-29 17:56:29.916: [    CRSD][3086931648]0ENV Logging level for Module: OCRRAW 0
    2011-06-29 17:56:29.928: [    CRSD][3086931648]0ENV Logging level for Module: OCROSD 0
    2011-06-29 17:56:29.931: [    CRSD][3086931648]0ENV Logging level for Module: CSSCLNT 0
    2011-06-29 17:56:29.936: [    CRSD][3086931648]0ENV Logging level for Module: OCRAPI 0
    2011-06-29 17:56:29.939: [    CRSD][3086931648]0ENV Logging level for Module: OCRUTL 0
    2011-06-29 17:56:29.942: [    CRSD][3086931648]0ENV Logging level for Module: OCRMSG 0
    2011-06-29 17:56:29.945: [    CRSD][3086931648]0ENV Logging level for Module: OCRCLI 0
    2011-06-29 17:56:29.948: [    CRSD][3086931648]0ENV Logging level for Module: OCRCAC 0
    2011-06-29 17:56:29.951: [    CRSD][3086931648]0ENV Logging level for Module: OCRSRV 0
    2011-06-29 17:56:29.954: [    CRSD][3086931648]0ENV Logging level for Module: OCRMAS 0
    2011-06-29 17:56:29.954: [ CRSMAIN][3086931648]0Filename is /u01/crs/oracle/product/10.2.0/crs/crs/init/rac2.pid
    [  clsdmt][2862934960]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac2DBG_CRSD))
    2011-06-29 17:56:29.986: [ CRSMAIN][3086931648]0Using Authorizer location: /u01/crs/oracle/product/10.2.0/crs/crs/auth/
    2011-06-29 17:56:30.038: [ CRSMAIN][3086931648]0Initializing RTI
    2011-06-29 17:56:30.039: [CRSTIMER][2841689008]0Timer Thread Starting.
    2011-06-29 17:56:30.042: [  CRSRES][3086931648]0Parameter SECURITY = 1, running in USER Mode
    2011-06-29 17:56:30.043: [ CRSMAIN][3086931648]0Initializing EVMMgr
    2011-06-29 17:56:30.045: [ COMMCRS][2831199152]clsc_connect: (0x89a02e0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
    2011-06-29 17:56:30.299: [ COMMCRS][2831199152]clsc_connect: (0x89a2ab8) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
    2011-06-29 17:56:31.555: [ CRSMAIN][3086931648]0CRSD locked during state recovery, please wait.
    2011-06-29 17:56:31.603: [ CRSMAIN][3086931648]0CRSD recovered, unlocked.
    2011-06-29 17:56:31.606: [ CRSMAIN][3086931648]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
    2011-06-29 17:56:31.620: [ CRSMAIN][3086931648]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
    2011-06-29 17:56:31.627: [ CRSMAIN][3086931648]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=rac2-priv)(PORT=49896))
    2011-06-29 17:56:31.627: [ CRSMAIN][3086931648]0Starting Threads
    2011-06-29 17:56:31.628: [ CRSMAIN][3086931648]0CRS Daemon Started.
    2011-06-29 18:03:02.066: [  CRSRES][2735582128]0Resource Registered: ora.rac1.vip
    2011-06-29 18:03:05.949: [  CRSRES][2735582128]0Resource Registered: ora.rac2.vip
    2011-06-29 18:03:09.666: [  CRSRES][2735582128]0Resource Registered: ora.rac1.gsd
    2011-06-29 18:03:11.523: [  CRSRES][2735582128]0Resource Registered: ora.rac2.gsd
    2011-06-29 18:03:13.329: [  CRSRES][2735582128]0Resource Registered: ora.rac1.ons
    2011-06-29 18:03:15.048: [  CRSRES][2735582128]0Resource Registered: ora.rac2.ons
    2011-06-29 18:03:15.965: [  CRSRES][2714192816]0Attempting to start `ora.rac1.vip` on member `rac1`
    2011-06-29 18:03:30.471: [  CRSRES][2714192816]0Start of `ora.rac1.vip` on member `rac1` succeeded.
    2011-06-29 18:03:31.227: [  CRSRES][2714192816]0startRunnable: setting CLI values
    2011-06-29 18:03:31.258: [  CRSRES][2714192816]0Attempting to start `ora.rac2.vip` on member `rac2`
    2011-06-29 18:03:44.710: [  CRSRES][2714192816]0Start of `ora.rac2.vip` on member `rac2` succeeded.
    2011-06-29 18:03:45.588: [  CRSRES][2714192816]0Attempting to start `ora.rac1.gsd` on member `rac1`
    2011-06-29 18:03:45.777: [  CRSRES][2714192816]0Start of `ora.rac1.gsd` on member `rac1` succeeded.
    2011-06-29 18:03:46.523: [  CRSRES][2714192816]0startRunnable: setting CLI values
    2011-06-29 18:03:46.588: [  CRSRES][2714192816]0Attempting to start `ora.rac2.gsd` on member `rac2`
    2011-06-29 18:03:47.220: [  CRSRES][2714192816]0Start of `ora.rac2.gsd` on member `rac2` succeeded.
    2011-06-29 18:03:48.077: [  CRSRES][2714192816]0Attempting to start `ora.rac1.ons` on member `rac1`
    2011-06-29 18:03:49.727: [  CRSRES][2714192816]0Start of `ora.rac1.ons` on member `rac1` succeeded.
    2011-06-29 18:03:50.610: [  CRSRES][2714192816]0startRunnable: setting CLI values
    2011-06-29 18:03:50.658: [  CRSRES][2714192816]0Attempting to start `ora.rac2.ons` on member `rac2`
    2011-06-29 18:03:52.240: [  CRSRES][2714192816]0Start of `ora.rac2.ons` on member `rac2` succeeded.
    2011-06-29 18:07:44.810: [  CRSRES][2735582128]0startRunnable: setting CLI values
    2011-06-29 18:09:05.613: [  CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
    2011-06-29 18:09:05.623: [  CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
    2011-06-29 18:09:05.623: [  CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
    2011-06-29 18:09:05.624: [  CRSRES][2735582128]0StopResource: setting CLI values
    2011-06-29 18:09:05.631: [  CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
    2011-06-29 18:09:09.437: [  CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
    2011-06-29 18:09:09.438: [  CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
    2011-06-29 18:09:09.447: [  CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
    2011-06-29 18:09:09.685: [  CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
    2011-06-29 18:09:22.340: [  CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
    2011-06-29 18:10:21.884: [  CRSAPP][2735582128]0CheckResource error for ora.rac2.vip error code = 1
    2011-06-29 18:10:21.892: [  CRSRES][2735582128]0In stateChanged, ora.rac2.vip target is ONLINE
    2011-06-29 18:10:21.893: [  CRSRES][2735582128]0ora.rac2.vip on rac2 went OFFLINE unexpectedly
    2011-06-29 18:10:21.893: [  CRSRES][2735582128]0StopResource: setting CLI values
    2011-06-29 18:10:21.910: [  CRSRES][2735582128]0Attempting to stop `ora.rac2.vip` on member `rac2`
    2011-06-29 18:10:25.645: [  CRSRES][2735582128]0Stop of `ora.rac2.vip` on member `rac2` succeeded.
    2011-06-29 18:10:25.645: [  CRSRES][2735582128]0ora.rac2.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
    2011-06-29 18:10:25.657: [  CRSRES][2735582128]0ora.rac2.vip failed on rac2 relocating.
    2011-06-29 18:10:25.938: [  CRSRES][2735582128]0Attempting to start `ora.rac2.vip` on member `rac1`
    2011-06-29 18:10:39.079: [  CRSRES][2735582128]0Start of `ora.rac2.vip` on member `rac1` succeeded.
    2011-06-29 18:11:39.443: [  CRSRES][2735582128]0startRunnable: setting CLI values
    2011-06-29 18:11:52.836: [  OCRUTL][3009792944]u_freem: mem passed is null
    2011-06-29 18:12:59.776: [  CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
    2011-06-29 18:12:59.784: [  CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
    2011-06-29 18:12:59.784: [  CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
    2011-06-29 18:12:59.784: [  CRSRES][2735582128]0StopResource: setting CLI values
    2011-06-29 18:12:59.791: [  CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
    2011-06-29 18:13:03.395: [  CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
    2011-06-29 18:13:03.396: [  CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
    2011-06-29 18:13:03.404: [  CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
    2011-06-29 18:13:03.678: [  CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
    2011-06-29 18:13:16.047: [  CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
    2011-06-29 18:15:07.356: [  CRSRES][2735582128]0startRunnable: setting CLI values
    2011-06-29 18:26:36.393: [  CRSAPP][2735582128]0CheckResource error for ora.rac2.vip error code = 1
    2011-06-29 18:26:36.404: [  CRSRES][2735582128]0In stateChanged, ora.rac2.vip target is ONLINE
    2011-06-29 18:26:36.404: [  CRSRES][2735582128]0ora.rac2.vip on rac2 went OFFLINE unexpectedly
    2011-06-29 18:26:36.405: [  CRSRES][2735582128]0StopResource: setting CLI values
    2011-06-29 18:26:36.420: [  CRSRES][2735582128]0Attempting to stop `ora.rac2.vip` on member `rac2`
    2011-06-29 18:26:40.105: [  CRSRES][2735582128]0Stop of `ora.rac2.vip` on member `rac2` succeeded.
    2011-06-29 18:26:40.106: [  CRSRES][2735582128]0ora.rac2.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
    2011-06-29 18:26:40.114: [  CRSRES][2735582128]0ora.rac2.vip failed on rac2 relocating.
    2011-06-29 18:26:40.411: [  CRSRES][2735582128]0Attempting to start `ora.rac2.vip` on member `rac1`
    2011-06-29 18:26:53.678: [  CRSRES][2735582128]0Start of `ora.rac2.vip` on member `rac1` succeeded.
    2011-06-29 18:28:03.601: [  CRSRES][2735582128]0startRunnable: setting CLI values
    2011-06-29 18:28:22.695: [  CRSAPP][2735582128]0StartResource error for ora.rac2.vip error code = 1
    2011-06-29 18:28:44.847: [  CRSRES][2735582128]0startRunnable: setting CLI values
    2011-06-29 18:29:06.589: [  OCRUTL][2946853808]u_freem: mem passed is null
    2011-06-29 18:30:13.581: [  CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
    2011-06-29 18:30:13.598: [  CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
    2011-06-29 18:30:13.599: [  CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
    2011-06-29 18:30:13.599: [  CRSRES][2735582128]0StopResource: setting CLI values
    2011-06-29 18:30:13.606: [  CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
    2011-06-29 18:30:17.227: [  CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
    2011-06-29 18:30:17.228: [  CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
    2011-06-29 18:30:17.236: [  CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
    2011-06-29 18:30:17.563: [  CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
    2011-06-29 18:30:31.358: [  CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
    2011-06-29 18:33:54.570: [  CRSRES][2735582128]0startRunnable: setting CLI values
    2011-06-29 18:34:17.302: [  OCRUTL][2988813232]u_freem: mem passed is null
    2011-06-29 18:35:24.403: [  CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
    2011-06-29 18:35:24.412: [  CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
    2011-06-29 18:35:24.412: [  CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
    2011-06-29 18:35:24.412: [  CRSRES][2735582128]0StopResource: setting CLI values
    2011-06-29 18:35:24.431: [  CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
    2011-06-29 18:35:28.186: [  CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
    2011-06-29 18:35:28.187: [  CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
    2011-06-29 18:35:28.208: [  CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
    2011-06-29 18:35:28.510: [  CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
    2011-06-29 18:35:52.388: [  CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
    2011-06-29 18:39:18.464: [  CRSRES][2735582128]0startRunnable: setting CLI values
    2011-06-29 18:39:31.876: [  OCRUTL][2988813232]u_freem: mem passed is null
    2011-06-29 18:40:38.956: [  CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
    2011-06-29 18:40:38.965: [  CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
    2011-06-29 18:40:38.966: [  CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
    2011-06-29 18:40:38.966: [  CRSRES][2735582128]0StopResource: setting CLI values
    2011-06-29 18:40:38.972: [  CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
    2011-06-29 18:40:42.583: [  CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
    2011-06-29 18:40:42.584: [  CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
    2011-06-29 18:40:42.594: [  CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
    2011-06-29 18:40:42.977: [  CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
    2011-06-29 18:41:08.149: [  CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
    2011-06-29 18:42:18.061: [  CRSRES][2735582128]0startRunnable: setting CLI values
    2011-06-29 18:42:31.531: [  OCRUTL][2988813232]u_freem: mem passed is null
    2011-06-29 18:44:45.499: [  CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
    2011-06-29 18:44:45.507: [  CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
    2011-06-29 18:44:45.508: [  CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
    2011-06-29 18:44:45.508: [  CRSRES][2735582128]0StopResource: setting CLI values
    2011-06-29 18:44:45.516: [  CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
    2011-06-29 18:44:49.197: [  CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
    2011-06-29 18:44:49.198: [  CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
    2011-06-29 18:44:49.209: [  CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
    2011-06-29 18:44:49.449: [  CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
    2011-06-29 18:45:13.509: [  CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
    2011-06-29 18:47:31.668: [  CRSRES][2735582128]0startRunnable: setting CLI values
    2011-06-29 18:47:50.804: [  CRSAPP][2735582128]0StartResource error for ora.rac1.vip error code = 1

  • Failed to upgrade Oracle Cluster Registry configuration

    I'm making a new installation of Oracle RAC environment, the clusterware version is 10 and therefore the RDBMS, I'm using oracle linux 5 update 7, the installation is being performed on only one machine. The problem occurs at the end of the installation when I try to run / u01/app/oracle/product/10.2.0/crs/root.sh the error messages are:
    Failed to upgrade Oracle Cluster Registry configuration, which is issued shortly after the execution of root.sh.
    And in the log the error message is:
    31/10/2011 11:36:36.654: [OCRCONF] [103401184] ocrconfig starts ...
    31/10/2011 11:36:36.654: [OCRCONF] [103401184] Upgrading OCR data
    31/10/2011 11:36:36.661: [OCRCONF] [103401184] OCR Already in current version.
    31/10/2011 11:36:36.669: [OCRCONF] [103401184] Failed to call clsssinit (21)
    31/10/2011 11:36:36.670: [OCRCONF] [103401184] Failed to make a backup copy of OCR
    31/10/2011 11:36:36.670: [OCRCONF] [103401184] Exiting [status = failed] ...
    If anyone has faced this error and won, I'm accepting suggestions.
    Att.
    Italo Moisés dos Santos.

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Grid Computing » RAC, ASM & Clusterware Installation which you can get more quick response
    Regard
    Helios

  • Cannot configure Oracle Cluster File System (OCFS2)

    Dears,,
    While trying to use ocfs2console to Configure Oracle Cluster File System (OCFS2)
    Error appear to me as following:
    Could not start cluster stack error.This must be resolved before any OCFS2 filesystem can be mounted.
    How can solve this please?
    thanks & regards,,

    Dear all ,,
    My issue solved now . . .
    Really , it is strange.
    Once , i added /sbin in .bash_profile under ~ Directory as following . . .
    export PATH=$ORACLE_HOME/bin:$ORA_CRS_HOME/bin:/bin:/usr/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11R6/bin
    Then log out then back again.
    After this change , i able to run ocfs2console successfully.
    Hope this help you.
    Thanks for all,,
    Best regards,,

  • Is OCFS(Oracle Cluster File System) a real file system?

    Hi all
    Is oracle cluster file system something kind of FAT23 or NTFS on Windows, ext3 on Linux ?
    We install operating systems on FS , but with OCFS we install Oracle database on it instead of operation system ?
    As usual
    Applications
    OS
    File System
    Physical Drive
    But the ocfs is something like:
    Oracle
    OCFS
    OS
    OS's file system
    Physical Drive
    Is that right ?

    Robert Geier wrote:
    OCFS is a clustered filesystem. You don't use it for OS partitions (e.g /opt) but only for filesystems that will be shared between servers in a RAC cluster to hold database files.
    Are you installing RAC ? If so, then ASM is a better option than OCFS. If not, then you really don't need OCFS.Thanks
    I'm studying RAC.
    I hear that I can not put all kind of files into ASM but with OCFS I can hold them.
    Is that improved with 11g R2 ?

Maybe you are looking for

  • Ipod nano 5 resets but won't sync with itunes on two different pc's

    ipod nano 5 resets but won't sync with itunes on two different pc's

  • ITunes purchase

    I tried to rent a movie. But when i tried to download the movie it said error. o im still not able to download  it. But i just got the receipt for the movie for $3.99.

  • Load Plan Exception Finds no PrevStepLog Value

    import smtplib server = smtplib.SMTP('XXXmail') From = 'XXX' To = '#ERROR_RECIPIENT' Subject = ' '.join(['#Platform' ,'<%=snpRef.getSession("CONTEXT_NAME")%>' ,'<%=snpRef.getSession( "SESS_NAME" )%>' ,'<%=odiRef.getPrevStepLog("STEP_NAME")%>' ,'Faile

  • How can delete zoosk

    how can delete zoosk account on itunes

  • Full Installati​on for HP LJ 3015...

    I own two useless HP LJ 3015 since I do not have the original installation disks and HP thinks they are too valuable to allow its customers to download them. I do not have time to wait to order and receive in the mail, the disks. Can ANYONE help me g