Oracle Cluster Ready Service

Hi
I am using Ora10gR1 and SUSE Linux Enterprise Server 9. I am getting the following message in /var/log/messages
Aug 27 09:48:41 (none) logger: Oracle Cluster Ready Services disabled by corrupt install
Aug 27 09:48:41 (none) logger: Could not access /etc/oracle/scls_scr/ohare/root/crsstart.
I did not install CRS. Can you help?
Thx

Hi,
These don't have any affect on your database. If you want to disable these messages then comment following line in the inittab file
#h1:35:respawn:/etc/init.d/init.cssd run >/dev/null 2>&1 </dev/null
regards

Similar Messages

Error while installing Oracle Cluster Ready Services Release 1 (10.1.0.2)

Hi all,
I am trying for RAC 10gR1 (10.1.0.2) using two machines with Windows 2000 Server. For this I need to install Oracle Cluster Ready Services Release 1 (10.1.0.2).
Machine details are as follows:-
Node 1:
Computer Name:     RAC1
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection 2: (Used for Public Interface)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.65
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.10.10.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Node 2:
     Computer Name:     RAC2
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection 2: (Used for Public Interface)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.181
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.10.10.12
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
I have made following entries in Hosts file of both the machines:-
192.168.1.65     RAC1
192.168.1.181     RAC2
10.10.10.11     RAC01-PRIV
10.10.10.12     RAC02-PRIV
192.168.1.201     RAC01-VIP
192.168.1.202     RAC02-VIP
I have completed all the pre-installation steps, i.e. configuring the disk for storage, and both the machine are communicating each other through there Private and Public interfaces. Now the problem appears when I am installing Oracle Cluster Ready Services, at the end of Installation following message appears and the auto configuration steps fails.
================================================================================================================
Output generated from configuration assistant "Oracle Cluster Ready Services Configuration Assistant":
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac01-priv rac1
node 2: rac2 rac02-priv rac2
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk
Successful in setting block0 for voting disk.
Format complete.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
RAC1 service OracleCSService in improper PENDING state, err(997)
RAC2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Cluster Ready Services Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Private Interconnect Configuration Assistant":
PRIF-10: failed to initialize the cluster registry
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
===============================================================
I would be highly obliged if any one tell me why it is happing like this and what could be the possible remedy.
Waiting for the respone.
With Regards
Dinesh
[email protected]

Hi user478171,
I have the same problem with two nodes in Windows 2003 with RAC 10g R2, but I don't have idea to solve.
Please advice me
Thanks advances
regards,
IvanR

Want to download Oracle Cluster Ready Services Release 1...

Hello Guys,
I need to down load oracle cluster ready services, can any one specify the link where i can download from?
Please help.
Imran

Bring up the big Downloads page. (Big red button in the heading gets you there)
Nowadays the product's called Clusterware, because "With Oracle Database 10g Release 2 (10.2), Cluster Ready Services, or CRS, is now called Oracle Clusterware.".

Problems with Cluster Ready Service installation (RAC) in Oracle 10g R1

Hello
I have got problems with this installation. I am starting Oracle user
At the end of the installation I get a mesage when all Configuration Assistants are failed
I have got 2 computers with Windows 2000 PRO, two networks (private and public)
As a shared disk I use one external disk (with USB) attached to one computer.
What to do here?
please for a reply
Martin
PROT-1: Failed to initialize ocrconfig
SCLS error 1 reading current privileges.
Internal Error Information:
Category: 1234
Operation: scls_iddb_has_privgrp_by_name
Location: NetLocalGrou
Other: get local group failed
Dep: 0
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
ignoring upgrade failure of ocr(-1)
failed to configure Oracle Cluster Registry with CLSCFG, ret 102
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Notification Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/racgons.exe add_config migi:4948'
Start output from spawned process:
End output from spawned process.
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Private Interconnect Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:cluster_interconnect "public"/192.168.1.0:public'
Start output from spawned process:
PRIF-12: failed to initialize cluster support services
End output from spawned process.
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
PRIF-12: failed to initialize cluster support services
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
User Selected: Yes/OK
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

Cluster Ready Services installation stall

At the final step, when asked to execute:
/u02/oradata/orcl/root.sh
as the root user, I get the following output:
Adding daemons to inittab
Preparing Oracle cluster Ready Services (CRS):
At this point, the script hangs indefinitely. I ran the script with "sh -x ./root.sh" and found that the script actuall is STALLING at this step:
+ /etc/init.d/init.crs start
Preparing Oralce Cluster Ready Services (CRS):
+ /sbin/init q
+ /etc/init.d/init.cssd startcheck
I've attempted an install on 2 seperate computers running both WhiteBox Linux 3 as well as Centos OS 3.4 with no luck.
Any ideas would be GREATLY appreciated.

I don't know, why this happens, I have only a kind of workaround.
If you don't use Real Application Cluster and/or ASM (Automatic Storage Management) , you don't need CRS. So you could modify root.sh to exclude all CRS configuration and start statements.

CRS-4535: Cannot communicate with Cluster Ready Services

[oracle@bnl11237dat01 ~]$ /u01/app/11.2.0/grid/bin/cluvfy stage -post crsinst -n bnl11237dat01,bnl11237dat02 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "bnl11237dat01"
Destination Node Reachable?
bnl11237dat01 yes
bnl11237dat02 yes
Result: Node reachability check passed from node "bnl11237dat01"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
bnl11237dat02 passed
bnl11237dat01 passed
Result: User equivalence check passed for user "oracle"
ERROR:
Unable to obtain network interface list from Oracle Clusterware (OIFCFG)
Verification cannot proceed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@bnl11237dat01 ~]$ oifcfg iflist
bond1 10.32.25.160
bond2 10.32.17.200
bond2 169.254.0.0
bond0.1515 10.32.24.0
bond0.1536 172.16.7.0
[oracle@bnl11237dat01 ~]$ oifcfg iflist -p
bond1 10.32.25.160 PRIVATE
bond2 10.32.17.200 PRIVATE
bond2 169.254.0.0 UNKNOWN
bond0.1515 10.32.24.0 PRIVATE
bond0.1536 172.16.7.0 PRIVATE
[oracle@bnl11237dat01 ~]$ oifcfg iflist -p -n
bond1 10.32.25.160 PRIVATE 255.255.255.240
bond2 10.32.17.200 PRIVATE 255.255.255.248
bond2 169.254.0.0 UNKNOWN 255.255.0.0
bond0.1515 10.32.24.0 PRIVATE 255.255.255.192
bond0.1536 172.16.7.0 PRIVATE 255.255.255.0
[oracle@bnl11237dat01 ~]$ /u01/app/11.2.0/grid/bin/onsctl debug
HTTP/1.1 200 OK
Content-Length: 1923
Content-Type: text/html
Response:
== bnl11237dat01:6200 8732 11/05/19 11:44:09 ==
Home: /u01/app/11.2.0/grid
======== ONS ========
IP ADDRESS PORT TIME SEQUENCE FLAGS
127.0.0.1 6200 4dd4f2a3 00000000 00000008
Listener:
TYPE BIND ADDRESS PORT SOCKET
Local 127.0.0.1 6100 5
Remote any 6200 7
Remote any 6200 -
Connection Topology: (1)
IP PORT VERS TIME
127.0.0.1 6200 4 4dd4f2a3=
Client connections:
ID CONNECTION ADDRESS PORT FLAGS SENDQ REF SUB W
0 internal 0 01008a 00000 001 002
2 127.0.0.1 6100 01001a 00000 001 001
1 127.0.0.1 6100 01001a 00000 001 001
3 127.0.0.1 6100 01001a 00000 001 001
4 127.0.0.1 6100 01001a 00000 001 001
7 127.0.0.1 6100 01001a 00000 001 000
request 127.0.0.1 6100 03201a 00000 001 000
Worker Ticket: 10/10, Last: 11/05/19 11:42:21
THREAD FLAGS
40460940 00000012
405b4940 00000012
41280940 00000012
Resources:
Notifications:
Received: Total 0 (Internal 0), in Receive Q: 0
Processed: Total 0, in Process Q: 0
Pool Counts:
Message: 1, Link: 1, Ack: 1, Match: 1
[oracle@bnl11237dat01 ~]$
[root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl stop crs
CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.crsd' on 'bnl11237dat01'
CRS-2790: Starting shutdown of Cluster Ready Services-managed resources on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.bnl11237dat01.vip' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.oc4j' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.cvu' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN1.lsnr' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER.lsnr' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN3.lsnr' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN2.lsnr' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.bnl11237dat01.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.cvu' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.LISTENER_SCAN1.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.scan1.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.LISTENER.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.bnl11237dat02.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.LISTENER_SCAN3.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.scan3.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.LISTENER_SCAN2.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.scan2.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.scan1.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.bnl11237dat02.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.scan3.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.scan2.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.oc4j' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.ons' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.ons' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.net1.network' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.net1.network' on 'bnl11237dat01' succeeded
CRS-2792: Shutdown of Cluster Ready Services-managed resources on 'bnl11237dat01' has completed
CRS-2677: Stop of 'ora.crsd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.crf' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.ctssd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.evmd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.mdnsd' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.crf' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.evmd' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.ctssd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.cssd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.diskmon' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.gipcd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.diskmon' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.gpnpd' on 'bnl11237dat01' succeeded
CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'bnl11237dat01' has completed
CRS-4133: Oracle High Availability Services has been stopped.
[root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl start crs
CRS-4123: Oracle High Availability Services has been started.
[root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
I am unable to start Oracle Cluster Service on 11.2.0.2. Please can I know what the problem is and how to start CRS
thanks.

Hi,
after the crsctl start crs you have to wait a while till the clusterstack is up. You just issued crsctl check crs a little to early.
To see the startup stack do a crsctl stat res -t -init.
If not everything in crsctl stat res -t -init goes to online after a while, then you have a problem, which has to be analyzed.
However if crsctl stat res -t -init show everything is started use crsctl stat res -t to see the other processes coming online.
Can you post the crsctl stat res -t -init (if not everything is online) or a crsctl stat res -t.
Only thing which I find strange is that oifcfg does not list a PUBLIC interface...
Regards
Sebastian

Linux server logs Cluster Ready Services completed waiting on dependencies

hi all
we run oracle 10g RAC on two nodes of SLES 10 SP2 Itanium.
on node 1 of the db node I see this message.
Mar 13 15:35:03 odbs1 logger: Cluster Ready Services completed waiting on dependencies.
This message has appeared for the second time in 3 days. the server is behaving normally. Could someone please let me know what exactly is the cause.
i tried to google a bit but i am not an expert in RAC
Could someone please let me know if this is a major issue or is it a generic message for something

Hi,
It means that the CRS not came up on startup and you put it online manualy.
Check your ocssd.log for messages like it
[ CSSD]2007-09-13 15:43:00.038 [1147169120] >TRACE: clsc_send_msg: (0x7271b0) NS err(12571, 12560), transport (530, 113, 0)
If they exists, the explanation is: The network on OS startup is slower than CRS and the CRS cannot communicate with others nodes with interconnect. To avoid split brain problem, it kills himself causing automatic start of CRS fails.
This problem could be solved add a sleep on /etc/rc.d/rc3.d/SXXXinit.crs before line $ID/init.cssd autostart. Try sleep 15, sleep 20 and test restart of node.
You can see it on My Oracle Suporte note ID 459169.1
I hope it helps!!
Best Regards,
Rodrigo Mufalani
www.mufalani.com

Cluster ready services also for download?

Hi,
additionally to Oracle Database 10g (for Solaris) download, is it possible to download also "Cluster REady Services Release 1 CD-ROM"?
Hi
Michal

Bring up the big Downloads page. (Big red button in the heading gets you there)
Nowadays the product's called Clusterware, because "With Oracle Database 10g Release 2 (10.2), Cluster Ready Services, or CRS, is now called Oracle Clusterware.".

Cluster Ready Services Download

Could someone tell me where to find the download for release 2 is. I have CRS for release 1 but I can't seem to find it for R2.(Is this something I must buy now?)
Thank you

Bring up the big Downloads page. (Big red button in the heading gets you there)
Nowadays the product's called Clusterware, because "With Oracle Database 10g Release 2 (10.2), Cluster Ready Services, or CRS, is now called Oracle Clusterware.".

Cluster Ready Service in LAN

Hello
Is it possible to make Cluster Ready Service in LAN (two computers having Windows 2000 professional having only one network adapter on each node connected through the router with each other)?

two network adapters and Real Application Cluster

Error while checking the status of Oracle Cluster ware

Hi
I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
-bash-3.2$ ./crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
-bash-3.2$
But when I ran below one:
-bash-3.2$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE sfv9699 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE sfv9699
ora.crf
1 ONLINE ONLINE sfv9699
ora.crsd
1 ONLINE OFFLINE
ora.cssd
1 ONLINE ONLINE sfv9699
ora.cssdmonitor
1 ONLINE ONLINE sfv9699
ora.ctssd
1 ONLINE ONLINE sfv9699 OBSERVER
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE sfv9699
ora.evmd
1 ONLINE INTERMEDIATE sfv9699
ora.gipcd
1 ONLINE ONLINE sfv9699
ora.gpnpd
1 ONLINE ONLINE sfv9699
ora.mdnsd
1 ONLINE ONLINE sfv9699
So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
Alert <server_name>.log
2012-10-20 15:37:51.408
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:52.968
[crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:52.984
[crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:53.471
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:53.472
[ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
CRSD.log
2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[   CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.969: [    GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
2012-10-20 15:37:52.978: [ OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprinit: Could not open raw device
2012-10-20 15:37:52.981: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.983: [ OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
2012-10-20 15:37:52.984: [ CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [    CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
2012-10-20 15:37:52.984: [    CRSD][3563381328] Done.
=======================
I see in the above log that saying ASM instance is down and failed to open +DATA .
But the asm instance up and running
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
+ASM1            STARTED
And we havent created any disk named DATA before the installation. We have created only below two disks
SQL> select name,header_status from v$asm_disk;
NAME HEADER_STATUS
ASM_DATA MEMBER
FLASH_RECOVERY MEMBER
But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
SQL> select name,state from v$asm_diskgroup;
NAME STATE
DATA MOUNTED
Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
[root@SFV9699 bin]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
Seems like its trying to read the old disk DATA.
we have done asmscanning too with oracleasm scan disks. but no use.
Where I can remove the old entry of DATA disk.
It would be a great if a quick response get.
Thanks
SHIYAS M

The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
The only disks created are
[root@SFV9699 dev]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
And these disks are showing part of that group also.. Not quite sure how this happened..
what abt dropping this group.. will anything work.

ORA-29702: error occurred in Cluster Group Service operation

Hi,
After shutting down one node I'm trying but without success to start this node up:
SQL> startup
ORA-29702: error occurred in Cluster Group Service operation
I got this message.
Here is a log from file: orcl2_lmon_13886.trc
/oracle/admin/orcl/bdump/orcl2_lmon_13886.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters and Data Mining options
ORACLE_HOME = /oracle/DB
System name:     Linux
Node name:     DB2
Release:     2.6.18-53.el5
Version:     #1 SMP Wed Oct 10 16:34:19 EDT 2007
Machine:     x86_64
Instance name: orcl2
Redo thread mounted by this instance: 0 <none>
Oracle process number: 5
Unix process pid: 13886, image: oracle@DB2 (LMON)
*** SERVICE NAME:() 2008-12-19 10:08:26.214
*** SESSION ID:(1102.1) 2008-12-19 10:08:26.214
GES resources 21522 pool 8
GES enqueues 33158
GES IPC: Receivers 3 Senders 3
GES IPC: Buffers Receive 1000 Send (i:2750 b:1934) Reserve 1000
GES IPC: Msg Size Regular 408 Batch 8192
Batching factor: enqueue replay 201, ack 224
Batching factor: cache replay 126 size per lock 64
kjxggin: receive buffer size = 32768
clsc_connect: (0x1d19a030) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db2_crs))
2008-12-19 10:08:29.819: [ CSSCLNT]clsssInitNative: connect failed, rc 9
kgxgncin: CLSS init failed with status 3
kjxgmin: kgxgncin fails - (2)
kjxggin: generic group layer init fails
*** 2008-12-19 10:08:29.819
Global Enqueue Service Shutdown
*** 2008-12-19 10:08:29.820
global enqueue service detaching from CM:pid=13886
I did check listener, it did not work but I start it up:
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.3.0 - Production
Start Date 19-DEC-2008 10:49:42
Uptime 0 days 0 hr. 3 min. 55 sec
Trace Level off
Security ON: Local OS Authentication
SNMP ON
Listener Parameter File /oracle/DB/network/admin/listener.ora
Listener Log File /oracle/DB/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
The listener supports no services
The command completed successfully
LSNRCTL>
Could you give me a guide how to start up this node? or where is a problem?

A quick search of the Oracle documentation on the error number comes up with this
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96525/e29250.htm#1000969
ORA-29702 error occurred in Cluster Group Service operation
Cause: An unexpected error occurred while performing a CGS operation.
Action: Verify that the LMON process is still active. Also, check the Oracle LMON trace files for errors.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
How many database will play in this role.
Best,

hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance.

Oracle cluster installation problem

hi forums
i need experienced one to discuss with me about this problem and help me to put plan
i install oracle cluster ware 10.2 on my lab
first i install VMWare Workstation 6.5-7x
and i install windows server 2003 and do this configuration
-create 4 scsi harad with size 10 G
-create 5 scsi hard with size 1 g ( 3 for voting dist - 2 for OCR)
- enable automount for windows
- disable sense for new Network card
- 2 network card for public and other for private
- identifying network nodes in the host file
- rename this machin by rac1
- colne this machine and rename it to rac2 and change the public and private ip
----- now i have tow machine rac1,rac2
- check from rac1
cluster media\ckuvfy\runcluvfu.bat stage -pre crsinst -n rac1,rac2 -verbose
was successful
cluster media\ckuvfy\runcluvfu.bat comp ssa -n rac1,rac2
was sc\uccessful
and another check ......................
i begin installing oracle cluster ware
no problem
but after installing on creating cluster configuration assistant it was failed
the question is why this error happen ,although i check on any thing before install !?
i reed more and more and i found this problem happen because terminal service
use this commend
mstsc -v:servername /f - console
but i install local not remote
if any exprince with this please show to me why this error happen !?*
and what is the solution ?
for oracle rac in windows what is the best use VMWare or windows alone ?

Hi,
Check the below link to match your steps and verify according:
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
For practise and test purpose VMWARE is definetly a better choice.Check the below link which can help
you why it is better to use VMWARE.
http://blogs.vmware.com/performance/2007/11/ten-reasons-why.html
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

Oracle Cluster and libnnz10 problem - SOLVED!

Hi to all
I have some machines (XServe) with OSX 10.4.9 and Oracle 10.1.0.3.
In all the machines I follow the instructions find in this forum (the relink libnnz10.dylib trick) and all the databases runs very well.
Now I'm trying to instal two machines in cluster mode.
The node 1 is a clean machine. The node 2 is a machine that has a Oracle single instance running.
All the installation in cluster mode runs smooth and I made the same things that in a single instance (like the relink trick).
With all installed, the CRS daemon is running and the listeners is running (I run NETCA before runnig DBCA).
Using the DBCA works fine until the last step - for the database creation, the last script has a shutdown/startup command to run a full recompile of all packages and procedures in the database.
At this moment the installation fails (with end-of-communication channel). Looking in the logs, this is the _dyld libnnz10.dylib error.
Even after the crash in installation, I quit the DBCA and runs SQLPLUS. I connect in the database, try a startup (that fails with the error mentioned), reconnect again and make two commands : alter database mount; alter database open; (and it works).
I do this in the two nodes and the CRS daemon recognizes the running instances (with crs_stat -t I can see all online) and the database is running and in cluster (what I do in one instance appears in the other and the datafiles are the same), including failover tasks (like simulating a node down - the database still running).
But all tries to run the startup/shutdown commands fails. It fails always when the LMON processes try to start.
I recheck the installation, focusing in the relink trick with the libnnz10. When I use DBCA to install a single instance on node 1 or node 2 in the same ORACLE_HOME of the cluster, it runs fine (including startup/shutdown) - this make me think that all the database relink's are fine.
I try to relink the cluster. In installation it uses 4 makes and I redo this makes without the libnnz10. The makes runs well too, but the error continues (only using startup/shutdown in cluster database).
I'm doing the documentation of the process and will post it, but I want to resolve this issue.
Any ideas ?
Thanks to all
Message was edited by:
alliance01

Hi to all.
I downloaded the 10.1.0.5 as soon I can - thanks to damjanp!
After the download, I follow all the instructions.
I stop the database, all the services and the cluster. Run the installer and it works fine.
When I try to make the post-installation tasks, I cannot startup the database (nor with the error that I was having). I received a Oracle Cluster Configuration Error...
I read all the logs and find 3 errors. I do not know if this occurs because of wrong environment variables.
The commands awk, touch and basename fails - the scripts try to find this commands in /bin (this commands in OSX stay in /usr/bin). I prefer make a link (ln -s) using root :
ln -s /usr/bin/awk /bin/awk
ln -s /usr/bin/touch /bin/touch
ln -s /usr/bin/basename /bin/basename
When I done this, the cluster starts (ocssd.bin, crsd.bin e evmd.bin). But when I try to start the database, it fails (ORA-29702 : error occurred in Cluster Group Service operation) and srvctl gives me PRKH-1010 : Unable to communicate with CRS services. [OCR Error(Native : prsr_initCLSS:[21])].
To resolve this I use localconfig (user root) :
localconfig reset /<ORACLE_HOME>
After this, I shutdown all and restart the CRS services - and for my surprise the CRS automaticaly starts all the services (including the instances).
And the libnnz10 problema was gone!
I read the documentation and found that the "TNS - lost contact" problem in Tiger (yeah - Tiger) was resolved.
I think that 10.1.0.5 can runs on Tiger more easily.
The cluster are running fine now - I shutdown/startup the instance several times to test with no errors.
I will prepare a documentation to post in the Web about this installation. When I finish I post in this forum the link.
Thank's to all.

Oracle Cluster Ready Service

Similar Messages

Maybe you are looking for