Oracle Cluster Verification Utility
Hi,
I am installing oracle 12c but during installing it stuck at 65 percent and not moving ahead
on checked i found CVU UTTILITY so i downloaded it from oracle but do not know how to set that in db location
or any other idea to fix this problem
thanks
899401 wrote:
Pl identify the exact OS version. I assume you are installing 12c1 of the database ? is this a standalone install or a RAC install ? Are there any error messages in the install log file ?
OS -WINDOS SERVER 2008
YES
YES
no--it is installing but thru this it will take long timeand almost 3 hrs gone and from log file it says
Calling OiicInstallAPISession's resume Operation
thanks
Trying to match your answers to the questions .. I come up with this:
OS -WINDOS SERVER 2008 (Pl identify the exact OS version. )
YES (I assume you are installing 12c1 of the database ? )
YES (is this a standalone install or a RAC install ?)
no--it is installing but thru this it will take long timeand almost 3 hrs gone and from log file it says
Calling OiicInstallAPISession's resume Operation (Are there any error messages in the install log file ?)
Or should it be read as
OS -WINDOS SERVER 2008 (Pl identify the exact OS version. )
YES (I assume you are installing 12c1 of the database ? )
YES (is this a standalone install ...)
no-- (or a RAC install ?)
it is installing but thru this it will take long timeand almost 3 hrs gone and from log file it says
Calling OiicInstallAPISession's resume Operation (Are there any error messages in the install log file ?)
Similar Messages
-
"Oracle Cluster Verification Utility" failed - 10gR2 - VMware - CentOS 4
Hi,
While installing 10g R2 on VMWare with CentOS 4, I am encountering an error:
Command = /u01/crs/oracle/product/10.2.0/crs/bin/cluvfy has failed
INFO: Configuration assistant "Oracle Cluster Verification Utility" failed
*** Starting OUICA ***
Oracle Home set to /u01/crs/oracle/product/10.2.0/crs
Configuration directory is set to /u01/crs/oracle/product/10.2.0/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/crs/oracle/product/10.2.0/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
The logs show me:
COMMAND=/u01/crs/oracle/product/10.2.0/crs/bin/cluvfy stage -post crsinst -n rac1,rac2
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
ERROR:
OCR integrity results are inconsistent amongst the nodes.
OCR integrity found invalid for nodes: rac2
OCR integrity found valid for nodes: rac1
OCR integrity check failed.
I have replaced "clsfmt.bin" with patch 4679769 to avoid the FAILED TO FORMAT OCR DISK USING CLSFMT error on Node 1.
But still the Oracle Cluster Verification Utility failed with OCR integrity.
Also, have religiously followed the steps mentioned in the below link & didnt have any glitches during the entire process:
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
Any Suggestions??I kinda dont have that timestamp which you requested.
Posting what i have in crsd.log for node 2.
**I wish this site had an attachment section to make the threads more readable.
Anyways...
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2011-06-29 17:56:21.189: [ default][3086931648][ENTER]0
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2004, Oracle. All rights reserved
2011-06-29 17:56:21.189: [ default][3086931648]0CRS Daemon Starting
2011-06-29 17:56:21.190: [ CRSMAIN][3086931648]0Checking the OCR device
2011-06-29 17:56:21.280: [ CRSMAIN][3086931648]0Connecting to the CSS Daemon
2011-06-29 17:56:21.420: [ COMMCRS][66177968]clsc_connect: (0x8655ae0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:21.420: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:21.422: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:22.483: [ COMMCRS][66177968]clsc_connect: (0x8604c10) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:22.484: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:22.485: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:23.537: [ COMMCRS][66177968]clsc_connect: (0x8654e20) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:23.537: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:23.538: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:24.606: [ COMMCRS][66177968]clsc_connect: (0x8655008) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:24.606: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:24.608: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:28.445: [ CRSD][3086931648]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2011-06-29 17:56:28.446: [ CRSD][3086931648]0Active Version and Software Version are same
2011-06-29 17:56:28.446: [ CRSMAIN][3086931648]0Initializing OCR
2011-06-29 17:56:28.479: [ OCRRAW][3086931648]proprioo: for disk 0 (/dev/raw/raw1), id match (1), my id set (1669906634,1028247821) total id sets (1), 1st set (1669906634,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2011-06-29 17:56:28.621: [ CSSCLNT][3051752368]clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
2011-06-29 17:56:29.674: [ CRSD][3086931648]0ENV Logging level for Module: allcomp 0
2011-06-29 17:56:29.680: [ CRSD][3086931648]0ENV Logging level for Module: default 0
2011-06-29 17:56:29.720: [ CRSD][3086931648]0ENV Logging level for Module: COMMCRS 0
2011-06-29 17:56:29.730: [ CRSD][3086931648]0ENV Logging level for Module: COMMNS 0
2011-06-29 17:56:29.746: [ CRSD][3086931648]0ENV Logging level for Module: CRSUI 0
2011-06-29 17:56:29.755: [ CRSD][3086931648]0ENV Logging level for Module: CRSCOMM 0
2011-06-29 17:56:29.760: [ CRSD][3086931648]0ENV Logging level for Module: CRSRTI 0
2011-06-29 17:56:29.770: [ CRSD][3086931648]0ENV Logging level for Module: CRSMAIN 0
2011-06-29 17:56:29.823: [ CRSD][3086931648]0ENV Logging level for Module: CRSPLACE 0
2011-06-29 17:56:29.834: [ CRSD][3086931648]0ENV Logging level for Module: CRSAPP 0
2011-06-29 17:56:29.846: [ CRSD][3086931648]0ENV Logging level for Module: CRSRES 0
2011-06-29 17:56:29.852: [ CRSD][3086931648]0ENV Logging level for Module: CRSOCR 0
2011-06-29 17:56:29.871: [ CRSD][3086931648]0ENV Logging level for Module: CRSTIMER 0
2011-06-29 17:56:29.878: [ CRSD][3086931648]0ENV Logging level for Module: CRSEVT 0
2011-06-29 17:56:29.886: [ CRSD][3086931648]0ENV Logging level for Module: CRSD 0
2011-06-29 17:56:29.904: [ CRSD][3086931648]0ENV Logging level for Module: CLUCLS 0
2011-06-29 17:56:29.916: [ CRSD][3086931648]0ENV Logging level for Module: OCRRAW 0
2011-06-29 17:56:29.928: [ CRSD][3086931648]0ENV Logging level for Module: OCROSD 0
2011-06-29 17:56:29.931: [ CRSD][3086931648]0ENV Logging level for Module: CSSCLNT 0
2011-06-29 17:56:29.936: [ CRSD][3086931648]0ENV Logging level for Module: OCRAPI 0
2011-06-29 17:56:29.939: [ CRSD][3086931648]0ENV Logging level for Module: OCRUTL 0
2011-06-29 17:56:29.942: [ CRSD][3086931648]0ENV Logging level for Module: OCRMSG 0
2011-06-29 17:56:29.945: [ CRSD][3086931648]0ENV Logging level for Module: OCRCLI 0
2011-06-29 17:56:29.948: [ CRSD][3086931648]0ENV Logging level for Module: OCRCAC 0
2011-06-29 17:56:29.951: [ CRSD][3086931648]0ENV Logging level for Module: OCRSRV 0
2011-06-29 17:56:29.954: [ CRSD][3086931648]0ENV Logging level for Module: OCRMAS 0
2011-06-29 17:56:29.954: [ CRSMAIN][3086931648]0Filename is /u01/crs/oracle/product/10.2.0/crs/crs/init/rac2.pid
[ clsdmt][2862934960]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac2DBG_CRSD))
2011-06-29 17:56:29.986: [ CRSMAIN][3086931648]0Using Authorizer location: /u01/crs/oracle/product/10.2.0/crs/crs/auth/
2011-06-29 17:56:30.038: [ CRSMAIN][3086931648]0Initializing RTI
2011-06-29 17:56:30.039: [CRSTIMER][2841689008]0Timer Thread Starting.
2011-06-29 17:56:30.042: [ CRSRES][3086931648]0Parameter SECURITY = 1, running in USER Mode
2011-06-29 17:56:30.043: [ CRSMAIN][3086931648]0Initializing EVMMgr
2011-06-29 17:56:30.045: [ COMMCRS][2831199152]clsc_connect: (0x89a02e0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
2011-06-29 17:56:30.299: [ COMMCRS][2831199152]clsc_connect: (0x89a2ab8) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
2011-06-29 17:56:31.555: [ CRSMAIN][3086931648]0CRSD locked during state recovery, please wait.
2011-06-29 17:56:31.603: [ CRSMAIN][3086931648]0CRSD recovered, unlocked.
2011-06-29 17:56:31.606: [ CRSMAIN][3086931648]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2011-06-29 17:56:31.620: [ CRSMAIN][3086931648]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2011-06-29 17:56:31.627: [ CRSMAIN][3086931648]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=rac2-priv)(PORT=49896))
2011-06-29 17:56:31.627: [ CRSMAIN][3086931648]0Starting Threads
2011-06-29 17:56:31.628: [ CRSMAIN][3086931648]0CRS Daemon Started.
2011-06-29 18:03:02.066: [ CRSRES][2735582128]0Resource Registered: ora.rac1.vip
2011-06-29 18:03:05.949: [ CRSRES][2735582128]0Resource Registered: ora.rac2.vip
2011-06-29 18:03:09.666: [ CRSRES][2735582128]0Resource Registered: ora.rac1.gsd
2011-06-29 18:03:11.523: [ CRSRES][2735582128]0Resource Registered: ora.rac2.gsd
2011-06-29 18:03:13.329: [ CRSRES][2735582128]0Resource Registered: ora.rac1.ons
2011-06-29 18:03:15.048: [ CRSRES][2735582128]0Resource Registered: ora.rac2.ons
2011-06-29 18:03:15.965: [ CRSRES][2714192816]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:03:30.471: [ CRSRES][2714192816]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:03:31.227: [ CRSRES][2714192816]0startRunnable: setting CLI values
2011-06-29 18:03:31.258: [ CRSRES][2714192816]0Attempting to start `ora.rac2.vip` on member `rac2`
2011-06-29 18:03:44.710: [ CRSRES][2714192816]0Start of `ora.rac2.vip` on member `rac2` succeeded.
2011-06-29 18:03:45.588: [ CRSRES][2714192816]0Attempting to start `ora.rac1.gsd` on member `rac1`
2011-06-29 18:03:45.777: [ CRSRES][2714192816]0Start of `ora.rac1.gsd` on member `rac1` succeeded.
2011-06-29 18:03:46.523: [ CRSRES][2714192816]0startRunnable: setting CLI values
2011-06-29 18:03:46.588: [ CRSRES][2714192816]0Attempting to start `ora.rac2.gsd` on member `rac2`
2011-06-29 18:03:47.220: [ CRSRES][2714192816]0Start of `ora.rac2.gsd` on member `rac2` succeeded.
2011-06-29 18:03:48.077: [ CRSRES][2714192816]0Attempting to start `ora.rac1.ons` on member `rac1`
2011-06-29 18:03:49.727: [ CRSRES][2714192816]0Start of `ora.rac1.ons` on member `rac1` succeeded.
2011-06-29 18:03:50.610: [ CRSRES][2714192816]0startRunnable: setting CLI values
2011-06-29 18:03:50.658: [ CRSRES][2714192816]0Attempting to start `ora.rac2.ons` on member `rac2`
2011-06-29 18:03:52.240: [ CRSRES][2714192816]0Start of `ora.rac2.ons` on member `rac2` succeeded.
2011-06-29 18:07:44.810: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:09:05.613: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:09:05.623: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:09:05.623: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:09:05.624: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:09:05.631: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:09:09.437: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:09:09.438: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:09:09.447: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:09:09.685: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:09:22.340: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:10:21.884: [ CRSAPP][2735582128]0CheckResource error for ora.rac2.vip error code = 1
2011-06-29 18:10:21.892: [ CRSRES][2735582128]0In stateChanged, ora.rac2.vip target is ONLINE
2011-06-29 18:10:21.893: [ CRSRES][2735582128]0ora.rac2.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:10:21.893: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:10:21.910: [ CRSRES][2735582128]0Attempting to stop `ora.rac2.vip` on member `rac2`
2011-06-29 18:10:25.645: [ CRSRES][2735582128]0Stop of `ora.rac2.vip` on member `rac2` succeeded.
2011-06-29 18:10:25.645: [ CRSRES][2735582128]0ora.rac2.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:10:25.657: [ CRSRES][2735582128]0ora.rac2.vip failed on rac2 relocating.
2011-06-29 18:10:25.938: [ CRSRES][2735582128]0Attempting to start `ora.rac2.vip` on member `rac1`
2011-06-29 18:10:39.079: [ CRSRES][2735582128]0Start of `ora.rac2.vip` on member `rac1` succeeded.
2011-06-29 18:11:39.443: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:11:52.836: [ OCRUTL][3009792944]u_freem: mem passed is null
2011-06-29 18:12:59.776: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:12:59.784: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:12:59.784: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:12:59.784: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:12:59.791: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:13:03.395: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:13:03.396: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:13:03.404: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:13:03.678: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:13:16.047: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:15:07.356: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:26:36.393: [ CRSAPP][2735582128]0CheckResource error for ora.rac2.vip error code = 1
2011-06-29 18:26:36.404: [ CRSRES][2735582128]0In stateChanged, ora.rac2.vip target is ONLINE
2011-06-29 18:26:36.404: [ CRSRES][2735582128]0ora.rac2.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:26:36.405: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:26:36.420: [ CRSRES][2735582128]0Attempting to stop `ora.rac2.vip` on member `rac2`
2011-06-29 18:26:40.105: [ CRSRES][2735582128]0Stop of `ora.rac2.vip` on member `rac2` succeeded.
2011-06-29 18:26:40.106: [ CRSRES][2735582128]0ora.rac2.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:26:40.114: [ CRSRES][2735582128]0ora.rac2.vip failed on rac2 relocating.
2011-06-29 18:26:40.411: [ CRSRES][2735582128]0Attempting to start `ora.rac2.vip` on member `rac1`
2011-06-29 18:26:53.678: [ CRSRES][2735582128]0Start of `ora.rac2.vip` on member `rac1` succeeded.
2011-06-29 18:28:03.601: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:28:22.695: [ CRSAPP][2735582128]0StartResource error for ora.rac2.vip error code = 1
2011-06-29 18:28:44.847: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:29:06.589: [ OCRUTL][2946853808]u_freem: mem passed is null
2011-06-29 18:30:13.581: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:30:13.598: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:30:13.599: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:30:13.599: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:30:13.606: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:30:17.227: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:30:17.228: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:30:17.236: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:30:17.563: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:30:31.358: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:33:54.570: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:34:17.302: [ OCRUTL][2988813232]u_freem: mem passed is null
2011-06-29 18:35:24.403: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:35:24.412: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:35:24.412: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:35:24.412: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:35:24.431: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:35:28.186: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:35:28.187: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:35:28.208: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:35:28.510: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:35:52.388: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:39:18.464: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:39:31.876: [ OCRUTL][2988813232]u_freem: mem passed is null
2011-06-29 18:40:38.956: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:40:38.965: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:40:38.966: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:40:38.966: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:40:38.972: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:40:42.583: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:40:42.584: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:40:42.594: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:40:42.977: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:41:08.149: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:42:18.061: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:42:31.531: [ OCRUTL][2988813232]u_freem: mem passed is null
2011-06-29 18:44:45.499: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:44:45.507: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:44:45.508: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:44:45.508: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:44:45.516: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:44:49.197: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:44:49.198: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:44:49.209: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:44:49.449: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:45:13.509: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:47:31.668: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:47:50.804: [ CRSAPP][2735582128]0StartResource error for ora.rac1.vip error code = 1 -
I have been reading about Oracle RAC. I just want to know who actually runs these commands in Production servers.
crsctl start /stop crs
crs_start crs_stop crs_profile crs_stat -t
backing up and restoring voting disk
restoring OCR files
cluster verification utility
and such cluster commands.....
Can Oracle user himself runs them or should root run them?Oracle Clusterware Shutdown and Startup
</br>
Oracle Clusterware Shutdown and Startup
You can use a crsctl command as follows to stop Oracle Clusterware and its related
resources on a specific node:
crsctl stop crs
You can use a crsctl command as follows to start Oracle Clusterware and its related
resources on a specific node:
crsctl start crs
Note: You must run these crsctl commands as the root user. -
Repair broken Oracle cluster on Win 2000
I have an Oracle cluster (8.1.7. with OFS) running in a Windows 2000 AS environment. There are two nodes and -luckey me- it is on a test network.
A while ago I tried to install OEM in order to be able to configure a OMS.
I performed the install on the inactive node without stopping the Oracle (cluster)services (stupid, stupid....) and broke it off when it hung at the end.
From that moment on this node is no longer available for failover in the cluster. This operation seems to have affected this node's Oracle home. Later on I performed a de-install but this did'nt help.
Now I wonder:
is it possible to repair this 'broken' cluster and if so what would be the procedure to follow?
Thanks in advance,
GeorgesAt last I solved the problem myself.
On both nodes I desinstalled all Oracle products (Server, Fail Safe..) and later installed them again (first Oracle EE on both nodes, then OFS on both nodes).
Mind that all the fysical files for my databases were still available on SAN disks!
With the ORADIM utility I created services for my two databases on one node.
I recreated the Oracle clustergroup and added the necessary disk resources etc with Cluster administrator (Win2000).
I started Fail Safe Manager and added (one by one) my databases as standalone resources to the Oracle group and went through the verification process without warning.
Now everything is working fine again... -
Oracle Clustre, Oracle Cluster with RAC and Oracle 10g
Is there a difference between Oracle Cluster and Oracle Cluster with RAC? Please explain. Do existing database codes run unmodified in Cluster or Cluster with RAC environment? What needs to be modified to make existing SQL codes RAC-aware. How to achieve 'all automatic' in case of failure and resubmission of Queries from failed instance to a running instance?
In 10g environment, do we need to consider licensing of RAC as a separate product? What are additional features one derives in 10g that is not in Cluster +RAC?
Your comments and pointers to comparison study and pictorial clarification will be very helpful.Oracle cluster like failsafe before or Veritas Cluster or other vendor's cluster is meant for HA (high availability) purpose. Which 2 nodes or more can see a shared disk with 1 active node. Whenever this active node failed through heartbeat other machine will know and will take the database over from there.
Oracle RAC is more for HA and load balance. In Oracle RAC 2 or more nodes are accessing the database at the same time so it spread load across all these nodes.
I believe Oracle 10g RAC still need seperate license for it. But you need to call Oracle or check the production document to verify it.
Oracle 10g besides improvement in RAC. It's main improvement is on the build in management of the database itself. It can monitored and selftune itself to much furthur level then before and give DBA much more information to determine the cause of the problem as well. Plus improvement on lots of utility as well like RMAN , data pump etc... I don't want to get into too much detail on this you can check on their 10g new features for more detail view.
Hope this help. :) -
Error while checking the status of Oracle Cluster ware
Hi
I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
-bash-3.2$ ./crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
-bash-3.2$
But when I ran below one:
-bash-3.2$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE sfv9699 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE sfv9699
ora.crf
1 ONLINE ONLINE sfv9699
ora.crsd
1 ONLINE OFFLINE
ora.cssd
1 ONLINE ONLINE sfv9699
ora.cssdmonitor
1 ONLINE ONLINE sfv9699
ora.ctssd
1 ONLINE ONLINE sfv9699 OBSERVER
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE sfv9699
ora.evmd
1 ONLINE INTERMEDIATE sfv9699
ora.gipcd
1 ONLINE ONLINE sfv9699
ora.gpnpd
1 ONLINE ONLINE sfv9699
ora.mdnsd
1 ONLINE ONLINE sfv9699
So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
Alert <server_name>.log
2012-10-20 15:37:51.408
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:52.968
[crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:52.984
[crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:53.471
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:53.472
[ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
CRSD.log
2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.969: [ GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
2012-10-20 15:37:52.978: [ OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprinit: Could not open raw device
2012-10-20 15:37:52.981: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.983: [ OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
2012-10-20 15:37:52.984: [ CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
2012-10-20 15:37:52.984: [ CRSD][3563381328] Done.
=======================
I see in the above log that saying ASM instance is down and failed to open +DATA .
But the asm instance up and running
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
+ASM1 STARTED
And we havent created any disk named DATA before the installation. We have created only below two disks
SQL> select name,header_status from v$asm_disk;
NAME HEADER_STATUS
ASM_DATA MEMBER
FLASH_RECOVERY MEMBER
But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
SQL> select name,state from v$asm_diskgroup;
NAME STATE
DATA MOUNTED
Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
[root@SFV9699 bin]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
Seems like its trying to read the old disk DATA.
we have done asmscanning too with oracleasm scan disks. but no use.
Where I can remove the old entry of DATA disk.
It would be a great if a quick response get.
Thanks
SHIYAS MThe permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
The only disks created are
[root@SFV9699 dev]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
And these disks are showing part of that group also.. Not quite sure how this happened..
what abt dropping this group.. will anything work. -
Unable to load Oracle XML SQL utility
The following error appears for each java
class, when we attempt to load Oracle XML sql
utility into Oracle using the oraclexmlsqlload
script:
E.g.
Error while resolving class OracleXMLStore
ORA-00904: invalid column name
Does anyone know why we would receive this error?
Platform: Hp-UX 11.0
Oracle Version: 8.1.5.0
Background information:
The database was original created with the
compatible=8.0.5 set in the init.ora file, and
the creatation of java classes failed due to this,
so switched compatible to 8.1.0. Now after we
we adjusted the compatible setting and restarted
database, we started to receive the errors as
described above.
nullMurali,
Thank you, after I initialized Oracle's javavm
the errors disappeared.
The scripts were located under the javavm/install
directory.
Thanks again.
Murali K (guest) wrote:
: Hi Steven,
: Is the JavaVM loaded. i.e. are all the classes necessary for
: running Java in the server are loaded into the server? The
most
: common answer to your problem is that the javavm has not been
: initialized correctly or the database does not have all the
java
: library files necessary to load java programs.
: Please read chapter 4 in the Oracle8i java developers guide
: which talks about initializing a java-enabled database by
: running the initjvm script.
: If this still occurs then maybe it is a bug and we will have
to
: look at it.
: Thx
: Murali
: Steven Wegner (guest) wrote:
: : The following error appears for each java
: : class, when we attempt to load Oracle XML sql
: : utility into Oracle using the oraclexmlsqlload
: : script:
: : E.g.
: : Error while resolving class OracleXMLStore
: : ORA-00904: invalid column name
: : Does anyone know why we would receive this error?
: : Platform: Hp-UX 11.0
: : Oracle Version: 8.1.5.0
: : Background information:
: : The database was original created with the
: : compatible=8.0.5 set in the init.ora file, and
: : the creatation of java classes failed due to this,
: : so switched compatible to 8.1.0. Now after we
: : we adjusted the compatible setting and restarted
: : database, we started to receive the errors as
: : described above.
null -
Hi all,
I am trying for RAC 10gR1 (10.1.0.2) using two machines with Windows 2000 Server. For this I need to install Oracle Cluster Ready Services Release 1 (10.1.0.2).
Machine details are as follows:-
Node 1:
Computer Name: RAC1
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection 2: (Used for Public Interface)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.65
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.10.10.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Node 2:
Computer Name: RAC2
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection 2: (Used for Public Interface)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.181
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.10.10.12
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
I have made following entries in Hosts file of both the machines:-
192.168.1.65 RAC1
192.168.1.181 RAC2
10.10.10.11 RAC01-PRIV
10.10.10.12 RAC02-PRIV
192.168.1.201 RAC01-VIP
192.168.1.202 RAC02-VIP
I have completed all the pre-installation steps, i.e. configuring the disk for storage, and both the machine are communicating each other through there Private and Public interfaces. Now the problem appears when I am installing Oracle Cluster Ready Services, at the end of Installation following message appears and the auto configuration steps fails.
================================================================================================================
Output generated from configuration assistant "Oracle Cluster Ready Services Configuration Assistant":
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac01-priv rac1
node 2: rac2 rac02-priv rac2
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk
Successful in setting block0 for voting disk.
Format complete.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
RAC1 service OracleCSService in improper PENDING state, err(997)
RAC2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Cluster Ready Services Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Private Interconnect Configuration Assistant":
PRIF-10: failed to initialize the cluster registry
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
===============================================================
I would be highly obliged if any one tell me why it is happing like this and what could be the possible remedy.
Waiting for the respone.
With Regards
Dinesh
[email protected]Hi user478171,
I have the same problem with two nodes in Windows 2003 with RAC 10g R2, but I don't have idea to solve.
Please advice me
Thanks advances
regards,
IvanR -
How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.
How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
How many database will play in this role.
Best,hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance. -
Oracle cluster installation problem
hi forums
i need experienced one to discuss with me about this problem and help me to put plan
i install oracle cluster ware 10.2 on my lab
first i install VMWare Workstation 6.5-7x
and i install windows server 2003 and do this configuration
-create 4 scsi harad with size 10 G
-create 5 scsi hard with size 1 g ( 3 for voting dist - 2 for OCR)
- enable automount for windows
- disable sense for new Network card
- 2 network card for public and other for private
- identifying network nodes in the host file
- rename this machin by rac1
- colne this machine and rename it to rac2 and change the public and private ip
----- now i have tow machine rac1,rac2
- check from rac1
cluster media\ckuvfy\runcluvfu.bat stage -pre crsinst -n rac1,rac2 -verbose
was successful
cluster media\ckuvfy\runcluvfu.bat comp ssa -n rac1,rac2
was sc\uccessful
and another check ......................
i begin installing oracle cluster ware
no problem
but after installing on creating cluster configuration assistant it was failed
the question is why this error happen ,although i check on any thing before install !?
i reed more and more and i found this problem happen because terminal service
use this commend
mstsc -v:servername /f - console
but i install local not remote
if any exprince with this please show to me why this error happen !?*
and what is the solution ?
for oracle rac in windows what is the best use VMWare or windows alone ?Hi,
Check the below link to match your steps and verify according:
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
For practise and test purpose VMWARE is definetly a better choice.Check the below link which can help
you why it is better to use VMWARE.
http://blogs.vmware.com/performance/2007/11/ten-reasons-why.html
Best regards,
Rafi.
http://rafioracledba.blogspot.com/ -
I am trying to install 10.2.0.1 CRS on a 2 node cluster on RHEL 4.0 Nahant Update 7. I get the following errors when root.sh is run
Failed to upgrade Oracle Cluster Registry configuration._
Due to this reason , none of the clusterware background processes fail to start, following which the Configuration Assistant screen also experiences failure (Oracle Notification Server Configuration Assistant).
I tried to apply the 10.2.0.4 patchset also, still same issue. Did anyone see this issue ?
1) We use LINUX DEVICE MAPPER for multipathing and udev
2) We configured the multipathing device partitions and bound them to raw devices
So /dev/mapper/oradisk1 bound to /dev/raw/raw1 ( OCR disk)
and /dev/mapper/oradisk2 bound to /dev/raw/raw2 (VD)
I am able to perform the dd command successfully.
Any ideas ?
-SrinivasBTW, we our OS is Linux x86-64 with RHEL 4.0 Nahant Update 7. I also applied the patch 4679769.
Did a complete uninstall and reinstall. But issue persists.
-Srinivas -
OracleAS Portal Verification Service
Registeration of a WSDL URL with the
OracleAS Portal Verification Service
http://portalstandards.oracle.com/portal/page?_pageid=34,31863,34_31867&_dad=wsrp&_schema=WSRP
produces an error:
Unexpected error - ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1665
ORA-12535: TNS:operation timed out (WWC-35000)
Example WSDL: WSDL Oracle's Sample WSRP Producer. The URL for its WSDL is: http://portalstandards.oracle.com/wsrp/jaxrpc?WSDLPlease help me. I am the same problem.
I don't registration my provider because i have this message error:
Unexpected error - ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1665
ORA-12535: TNS:operation timed out (WWC-35000)
please Help me.
Thanks. -
Oracle Cluster and libnnz10 problem - SOLVED!
Hi to all
I have some machines (XServe) with OSX 10.4.9 and Oracle 10.1.0.3.
In all the machines I follow the instructions find in this forum (the relink libnnz10.dylib trick) and all the databases runs very well.
Now I'm trying to instal two machines in cluster mode.
The node 1 is a clean machine. The node 2 is a machine that has a Oracle single instance running.
All the installation in cluster mode runs smooth and I made the same things that in a single instance (like the relink trick).
With all installed, the CRS daemon is running and the listeners is running (I run NETCA before runnig DBCA).
Using the DBCA works fine until the last step - for the database creation, the last script has a shutdown/startup command to run a full recompile of all packages and procedures in the database.
At this moment the installation fails (with end-of-communication channel). Looking in the logs, this is the _dyld libnnz10.dylib error.
Even after the crash in installation, I quit the DBCA and runs SQLPLUS. I connect in the database, try a startup (that fails with the error mentioned), reconnect again and make two commands : alter database mount; alter database open; (and it works).
I do this in the two nodes and the CRS daemon recognizes the running instances (with crs_stat -t I can see all online) and the database is running and in cluster (what I do in one instance appears in the other and the datafiles are the same), including failover tasks (like simulating a node down - the database still running).
But all tries to run the startup/shutdown commands fails. It fails always when the LMON processes try to start.
I recheck the installation, focusing in the relink trick with the libnnz10. When I use DBCA to install a single instance on node 1 or node 2 in the same ORACLE_HOME of the cluster, it runs fine (including startup/shutdown) - this make me think that all the database relink's are fine.
I try to relink the cluster. In installation it uses 4 makes and I redo this makes without the libnnz10. The makes runs well too, but the error continues (only using startup/shutdown in cluster database).
I'm doing the documentation of the process and will post it, but I want to resolve this issue.
Any ideas ?
Thanks to all
Message was edited by:
alliance01Hi to all.
I downloaded the 10.1.0.5 as soon I can - thanks to damjanp!
After the download, I follow all the instructions.
I stop the database, all the services and the cluster. Run the installer and it works fine.
When I try to make the post-installation tasks, I cannot startup the database (nor with the error that I was having). I received a Oracle Cluster Configuration Error...
I read all the logs and find 3 errors. I do not know if this occurs because of wrong environment variables.
The commands awk, touch and basename fails - the scripts try to find this commands in /bin (this commands in OSX stay in /usr/bin). I prefer make a link (ln -s) using root :
ln -s /usr/bin/awk /bin/awk
ln -s /usr/bin/touch /bin/touch
ln -s /usr/bin/basename /bin/basename
When I done this, the cluster starts (ocssd.bin, crsd.bin e evmd.bin). But when I try to start the database, it fails (ORA-29702 : error occurred in Cluster Group Service operation) and srvctl gives me PRKH-1010 : Unable to communicate with CRS services. [OCR Error(Native : prsr_initCLSS:[21])].
To resolve this I use localconfig (user root) :
localconfig reset /<ORACLE_HOME>
After this, I shutdown all and restart the CRS services - and for my surprise the CRS automaticaly starts all the services (including the instances).
And the libnnz10 problema was gone!
I read the documentation and found that the "TNS - lost contact" problem in Tiger (yeah - Tiger) was resolved.
I think that 10.1.0.5 can runs on Tiger more easily.
The cluster are running fine now - I shutdown/startup the instance several times to test with no errors.
I will prepare a documentation to post in the Web about this installation. When I finish I post in this forum the link.
Thank's to all. -
Failed to upgrade Oracle Cluster Registry configuration
I'm making a new installation of Oracle RAC environment, the clusterware version is 10 and therefore the RDBMS, I'm using oracle linux 5 update 7, the installation is being performed on only one machine. The problem occurs at the end of the installation when I try to run / u01/app/oracle/product/10.2.0/crs/root.sh the error messages are:
Failed to upgrade Oracle Cluster Registry configuration, which is issued shortly after the execution of root.sh.
And in the log the error message is:
31/10/2011 11:36:36.654: [OCRCONF] [103401184] ocrconfig starts ...
31/10/2011 11:36:36.654: [OCRCONF] [103401184] Upgrading OCR data
31/10/2011 11:36:36.661: [OCRCONF] [103401184] OCR Already in current version.
31/10/2011 11:36:36.669: [OCRCONF] [103401184] Failed to call clsssinit (21)
31/10/2011 11:36:36.670: [OCRCONF] [103401184] Failed to make a backup copy of OCR
31/10/2011 11:36:36.670: [OCRCONF] [103401184] Exiting [status = failed] ...
If anyone has faced this error and won, I'm accepting suggestions.
Att.
Italo Moisés dos Santos.Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Grid Computing » RAC, ASM & Clusterware Installation which you can get more quick response
Regard
Helios -
We are using 9iAs/R2 on linux.
When I start or stop services I get the message:
oracle.sysman.emSDK.util.jdk.EMException
This action results in following status information:
- BC4J is down
- Clickstream Collector is running
- HTTP Server has question mark
- OC4J_home has question mark
- Web Cache is running
- My OC4J instance has question mark.
But I deployed an Ear-file and the Application is
running.
There are no status information like CPU ..
Has anyone an idea what is wrong, or any further informations?
Many thanks in advance
peterstart from command line with dcm the webserver and it'll give you an ADM error you can then look up on metalink how to solve.
Maybe you are looking for
-
Hi All I am bought the "DVD Ripper HD" App form the App Store today and it whenever it trys to load up it keeps crashing. The error message is as follows. Can anyone recommend a solution? Many thanks Drew Process: DVD Ripper HD [249] Path:
-
HT1296 how can you un disable your ipod
I cant undisable my ipod touch....
-
How do you change the name of the coloured tags?
I want to change the name of the coloured tags but cannot see where I can do this. Is it possible to add a colour to a new tag?
-
Check out whether u can solve this issue: This is the error which I have faced in one of my clients place. The scenario goes like this Because of some virus problem the server was abnormally shutdown. Next time when I tried to open the database I got
-
Movement 551 of header Material in MFBF in REM
Hi, I am having an issue, In REM scenario there is a planned order of 10 Qty. I am using MFBF trx to confirm 5 qty as scrap by using assembly scrap. In this, system posting 261 mvt for components but there in no 551 mvt of Header material, Can anybod