Oracle Clusterware and Oracle Real Application Clusters Install Guide

I've downloaded the latest "Oracle Database - Oracle Clusterware and Oracle Real Application Clusters Install Guide - 10g Release 2 (10.2) for HP-UX PA-RISC" (part no. B14202-01) dated August 2005 from OTN. I'm getting the following error when opening the pdf file in Adobe Reader:
"Cannot extract the embedded font 'PEPPLC+Palatino-Italic'. Some characters may not display or print properly."
When I print the manual, I get blank pages throughout the document which, in my opinion, should contain text and don't. Specifically pages 1-11, 2-5, 2-19, 2-24, 2-33, 3-5, 3-19 to name a few. When I go to those pages within the pdf file in Adobe Reader, I get the error: "There was a problem reading this document (114)."
Can you verify this problem on your end. Also, how do I get a good copy of this document?

Hi!
Apologies for the delay in responding to you. Please try the documentation library, part B19306-01 at URL: http://www.oracle.com/technology/documentation/database10gR2.html. Search for the part B14202-01 and click: pdf at top right. Part B14202-01 documentation pdf is currently displaying and printing on this end. The blank pages at the end of each main topic are inserted on purpose.
Another link to part B14202-01, on OTN is under the OEM, Oracle Enterprise Manager 10g Release 2 (10.2): http://www.oracle.com/pls/db102/portal.portal_db?selected=21
Thank you for your comments and feedbacks. Its much appreciated.
Main OTN, documentation URL: http://www.oracle.com/technology/documentation/index.html
Regards,
Chao

Similar Messages

  • Does oracle clusterware and oracle RAC require sun cluster

    Hi,
    I have to setup oracle RAC on solaris 10 SPARC. so is it necessary to install sun cluster 3.2, QFS file system on solaris
    I have 2 sun sparc servers with solaris 10 installed on it and shared LUN setup(SAN disk RAID 5 partitions)
    Have to have 2 node setup for RAC load balancing.
    Regards
    Prakash

    Hi Prakash,
    very interesting point:
    As per oracle clusterware documents the cluster manager support is only for windows and linux.
    In case of solaris SPARC will the cluster manager get configured ???
    The term "Cluster Manager" refers to a "cluster manager" that Oracle used in 9i times and this one was indeed only available on Linux / Windows.
    Therefore, let me, please, ask you something: Which version of Oracle RAC do you plan to use?
    Because for 9i RAC, you would need Sun or Veritas Cluster on Solaris. The answers given here that Sun Cluster would not be required assume 10g RAC or higher.
    Now, you might see other dependencies which can be resolved by Sun Cluster. I cannot comment on those.
    For the RAW setup: having RAW disks (not raw logical volumes) will be fine without Veritas and ASM on top.
    Hope that helps. Thanks,
    Markus

  • Oracle Real Application Clusters

    hi all
    i am using oracle database 11g Release2 and Oracle Linux enterprise edition.
    can anyone guide me why we need to use Oracle Real Application Clusters and plz
    guide me how to install or configure all these?
    and someone told me we needed 10Gb Gigabyte Ethernet.
    how to go for 10GB by using LoopBack?
    i am using vertualbox and i checked the loopback is only 1GB so how to go for 10GB
    i posted my thread here
    Oracle Real Application Clusters
    but someone suggested me to for this forum so i posted here.
    so if i am wrong plz forgive me.

    nisha wrote:
    hi all
    i am using oracle database 11g Release2 and Oracle Linux enterprise edition.
    can anyone guide me why we need to use Oracle Real Application Clusters and plz
    guide me how to install or configure all these?
    and someone told me we needed 10Gb Gigabyte Ethernet.
    how to go for 10GB by using LoopBack?
    i am using vertualbox and i checked the loopback is only 1GB so how to go for 10GB
    i posted my thread here
    Oracle Real Application Clusters
    but someone suggested me to for this forum so i posted here.
    so if i am wrong plz forgive me.You can check the following link to learn why RAC is used:
    http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/admcon.htm#i1058057
    Moreover, I've a step by step RAC installation guide on vmware, but it's for 10gR2. However, you can check it and have a basic knowledge of the main steps
    http://kamranagayev.wordpress.com/2011/04/05/step-by-step-installing-oracle-10g-rac-on-vmware/

  • Install Real Application Clusters (RAC) and Automated Storage Management (A

    Do I have to install Real Application Clusters (RAC) and Automated Storage Management (ASM) for ETL
    I have installed Oracle 10g Release 1 on WIndows 2000 with datawarehousing option.
    Is it ok
    Or do I need to install Oracle database again.
    Please help

    Greg,
    From what you describe you did exactly the right thing. The runtime platform service will by default run on DWH01, but you can shut it down on that node and have it run on DWH02 (in case you wanted to bring down DWH01 but still run Warehouse Builder processes). Note that we strongly recommend using the net service name in the location registration in the deployment manager (so that you automatically take advantage of the client-side load balancing feature of RAC (as well as the server-side load balancing)).
    Thanks,
    Mark.

  • Converting to Oracle Real Application Clusters from Single-Instance Oracle

    Is there any notes at metalink for
    Converting to Oracle Real Application Clusters from Single-Instance Oracle Databases
    We should have 10g DB on ASM to make it RAC?

    With Oracle Database 10g Release 2, $ORACLE_HOME/bin/rconfig tool can be used to convert Single instance database to RAC. This tool takes in a xml input file and convert the Single Instance database whose information is provided in the xml. You can run this tool in "verify only" mode prior to performing actual conversion. This is documented in the RAC admin book and a sample xml can be found $ORACLE_HOME/assistants/rconfig/sampleXMLs/ConvertToRAC.xml. Grid Control 10g Release 2 provides a easy to use wizard to perform this function.

  • New Note 790189.1 - Oracle Clusterware and Application Failover Management

    Hi all,
    please, note the newly created Metalink Note 790189.1 - Oracle Clusterware and Application Failover Management if you want to use Oracle Clusterware as a general purpose cluster solution. The note intends to clarify and to explain the current situation in regards to the supportability of applications managed by Oracle Clusterware.
    In environments not including Oracle RAC, Oracle Clusterware still provides the level of high availability that is commonly known to be achievable for applications and databases managed in (failover) cluster environments. These environments can include Oracle Single Instance Databases, Oracle Application Servers, Oracle Enterprise Manager components, third party databases, or any other kind of application. (For more information on Oracle Clusterware 11g in general, please, refer to [Oracle Clusterware homepage|http://otn.oracle.com/clusterware].)
    Metalink Note 790189.1 - Oracle Clusterware and Application Failover Management is tightly integrated with the information on application failover management available on the [Oracle Clusterware homepage|http://otn.oracle.com/clusterware] and discusses typical questions like
    * Terminology
    * Script supportability and preconfigured agents
    * How to prove that action scripts work outside of Oracle Clusterware
    * Supportability of the Oracle Database Single Instance example scripts
    * How do I know whether a certain script is supported as a preconfigured agent?
    Metalink Note 790189.1, however, does not change the level of support that has been introduced for these kind of configurations as of Oracle Database 10g Release 2: "Generally, Oracle does not support action scripts in the strict terms of supporting individual code fragments. Oracle fully supports the integration of individual action scripts proven to run outside of Oracle Clusterware into the Oracle Clusterware management stack. Supported operations therefore typically involve crs_* commands such as crs_profile, crs_register, crs_setperm, crs_getperm, crs_start, crs_stop, and crs_relocate invoked on custom resources. If actions scripts are used as part of a preconfigured agent, Oracle or the application provider who provides the agent will support the integration of this agent, while only the application provider will provide support for the individual action scripts."
    Just for your information. Thanks,
    Markus

    not meant to be a question - rather an announcement.

  • Installing Oracle Clusterware and TimesTen

    I am attempting to setup TimesTen with Oracle Clusterware and this website "Installing Oracle Clusterware and TimesTen" says that I should "Install Oracle Clusterware 11.2.0.2" however, when I go and look for I found this page:  "Oracle Grid Infrastructure Downloads" however as you can see from that page it does not have version 11.2.0.2. 
    Does anyone know where I can get Clusterware 11.2.0.2?
    Would version 12.1.0.1.0 work for me?
    Thanks,
    Victor

    Thanks for the info on 12.1.0.1.0 :-(
    If you look at eDelivery 11.2.0.2 is not available.  I guess I will have to go with setting TimesTen setup without the Grid Infrastructure (i.e. use these instructions instead - "Active Standby Pair with TimesTen In-Memory Database")
    https://lh4.googleusercontent.com/Kg-lODsuooX9cl5-z2W2tuQ0KDQjLCuytwjf_jma1OfZf5IUiKiwQTvUtkRQvBSASQ=w1808-h804

  • How to Install 9i real application clusters on a PC!

    How to install and deploy Oracle Real Application Clusters on a single Linux
    server with a minimal configuration (less than $1000 worth of harware):
    First of all to install Oracle cluster database you DON'T HAVE to have a cluster, but a
    single PC may do as well (of course thi kind of installation will not be of
    much use for a production DB). A minimal server that I HAVE TESTED is: Celeron 750 MhZ,
    512 Mb of RAM, 2 IDE HD, Linux Suse 7.2
    This document contains the steps needed to deploy a working Oracle 9i Database with a
    minimal comment. For a complete discussion refer to Oracle documentation, namely:
    Oracle 9i administrator's reference part number A90347-02
    Oracle 9i Linux release notes part number A90356-01
    Oracle 9i Real Application Clusters Administration part numebr A89869-01
    1) set up the partitions to user for Oracle software and the ones to use as raw devices
    for the cluster DB. Soppose you want to you use an HD mounted as the 3rd IDE device
    (/dev/hdc) for the cluster DB. Then you have to partition it with fdisk with a large
    extended partition (say hdc1). Create a large number of logical partitions inside hdc1
    (say hdc5 till hdc20) of about 300 Mb in size (all of the same size for simplicity).
    2) Real application clusters wants to store the DB strutures into raw devices or a
    cluster filesystem. Create the raw devices using the following command (as superuser):
    raw /dev/raw1 /dev/hdc5
    raw /dev/raw2 /dev/hdc6 ... etc till /dev/hdc20
    you will need to repeat these steps after every boot
    3) Set up the Oracle user (already done with the Suse distribution), environment variables
    and mount point.
    Install Oracle software enterprise edition
    4) Complete the installation with a custom install of the real application cluster option.
    This will add a directory called oracm under your oracle home, which contains the
    cluster manager software
    5) edit $ORACLE_HOME/oracm/admin/nmcfg.ora, it contains 3 lines for the set-up of the
    cluster manager sofware:
    DefinedNodes=localhost
    CmDiskFiles=/dev/raw2
    CmHostName=localhost
    6) edit /var/opt/oracle/srvConfig.loc. It contains 1 line with the location of a raw device
    used to sync the cluster nodes:
    srvconfig_loc=/dev/raw1
    7) start the cluster manager software (as superuser):
    $ORACLE_HOME/oracm/bin/ocmstart.sh
    8) as the oracle user start the global cache service:
    gsd
    9) you can now create a cluster db. to use the configuration assistant you need to set
    an extra environment variable:
    export THREADS_FLAG=native
    10) start the configuration assistant: dbca
    expect some errors in the script the dbca generates, best is to review them before
    execution
    11) after the db creation you'll be able to start two instances on the same DB,
    which means you will have a cluster DB!
    12) the environment variable ORACLE_SID will determine the instance to which you can
    connect by means of a special syntax: SID.parameter=value
    this is used for example for paramters like instance_number, thread, etc
    also the parameter cluster_database must be set to true
    All these problems are normaly handled by the dbca.
    Have fun,
    Luca Canali
    OCP-DBA

    RedHat 7.1 with the some configuration I run a production 9.0.1
    database: Compaq Proliant Hardware with a RA4100 storage.
    The script created from the dbca seems fine, but the dbca give
    me the
    some error I get from:
    srvconfig -init
    [...]stop all daemons and oracle programs on both machines, then
    start only $ORACLE_HOME/oracm/bin/ocmstart.sh,
    then run the line
    srvconfig -init
    you can check it by running
    srvconfig -version
    it should output something like "9.0.0.0.0"
    before running dbca, make sure ocmstart.sh and gsd are
    running on both machines ("lsnodes -v" should putput sbshadow1
    and dbshadow2).
    BTW - I cant run clusca... Can somenome give a sample nmcfg.ora,
    just to check my parameters? for dbshadow1:
    DefinedNodes=dbshadow1 dbshadow2
    CmDiskFiles=/dev/raw/raw2
    CmHostName=dbshadow1
    for dbshadow2:
    DefinedNodes=dbshadow1 dbshadow2
    CmDiskFiles=/dev/raw/raw2
    CmHostName=dbshadow2
    Saludos
    --Marcos.
    Ps: can you contact me by e-mail? i have some questions regarding
    your HW

  • What is Oracle 10g Release 2 Real Application Cluster?

    Hello Guys,
    I have been working in Oracle database 9i for last 2 years. Just using the simple features of oracle. Now our data have grown and company wants to enhance the database version and also want to perform load balancing at oracle's end.
    Have heard a lot about Oracle RAC, but i am not sure what actually is oracle rac and its installation.
    What is the difference between Oracle 10g Release 2 Enterprise Installation and Oracle 10g Release 2 Real Application Cluster installation. Are these 2 different softwares available on different CDs or RAC is only a different way to install oracle 10g database in RAC mode.
    Please clerify and explain. Sorry this is a very beginner level question but i want to learn it and implement it.
    Regards,
    Imran Baig

    What is the difference between Oracle 10g Release 2
    Enterprise Installation and Oracle 10g Release 2 Real
    Application Cluster installation. Are these 2Enterprise Edition is the database management software provided byu Oracle.
    RAC is an extension to the Standard and Enterprise Edition to permit the same database to be managed from two or more computers. (Withe Enterprise Edition, it is an extra cost option. With Standard Edition, it is included in the price, since SE has other limitations.)
    Conceptually, RAC is simple - IF you understand the difference between Instance and Database. RAC = 1 database managed by many instances
    Physically, RAC requires a healthy investment in infrastructure - the infrastructure and the RAC software addresses the question: how do you get several computers able to read and write to the same disk and the same block without data corruption?
    If you are serious about RAC, take a course. If you are in the US, consider http://www.psoug.org as an 'Intro to RAC' course provider.

  • How to start with ORACLE APPS and ORACLE APPLICATION SERVER?

    Hi !!
    I am a little known with oracle database. But recently i have been asked to update my skills with oracle apps and oracl e application server. I do not have any prior experience with these products of oracle and I really have 0 knowledge of it.
    Can anybody help me find a start with oracle apps and oracle as?
    Thanks.

    Welcome
    http://www.oracle.com/technology/documentation/applications.html
    You can download from here.
    Regards
    Asif Kabir
    -- If helpful mark the post as correct/helpful, also close the thread as answered.

  • Which is the difference between Oracle RAC and Oracle Clusterware?

    Hi all, maybe this is a stupid question, but I've read the documentation, and still don't understand which is the difference between RAC and Clusterware.
    Can anybody explain it to me?
    Thanks in advance!

    RAC is database option part of Oracle Database software needed to have database running in cluster mode; see http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/glossary.htm#CNCPT2076.
    Clusterware is separate software needed to run Oracle Database in cluster mode: you can use Oracle Clusterware without Oracle Database but you cannot use Oracle Database with RAC option without Oracle Clusterware.
    See http://download.oracle.com/docs/cd/E11882_01/rac.112/e16794/intro.htm#BABCHEEE.
    Edited by: P. Forstmann on 19 nov. 2010 19:11
    Edited by: P. Forstmann on 19 nov. 2010 19:11

  • CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.

    oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
    Reply
    Dear Friends,
    I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
    at this time my database was into another machine.
    then i installed oracle 9i database into the same machine
    (as the oracle 9ias was installed)
    at the instalation of oracle 9i database one error comes
    and shows that Agent configuration Assistant Installation
    fail.
    but After installation of database it work properly.
    there is no problem.
    but when I try to run from through web(by using oracle 9ias)
    it gives Internal error(500).
    i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
    HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
    With regards
    Siddharth Singh
    [email protected]

    Hi James,
    Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
    If yes what is the version of RH Linux you were using ?
    Any docs for that ?
    [email protected]
    Regards
    Amudharasu

  • CRS 와 10G REAL APPLICATION CLUSTERS

    제품 : ORACLE SERVER
    작성날짜 : 2004-11-30
    CRS 와 10G REAL APPLICATION CLUSTERS
    ===================================
    PURPOSE
    이 문서는, 10g Real Application Cluster의 CRS (Cluster Ready Services)에 대한 추가적인
    정보를 제공하는 것을 목적으로 한다.
    Explanation
    1. CRS 와 10g REAL APPLICATION CLUSTERS
    CRS (Cluster Ready Services)는 10g Real Application Cluster의 새로운 기능으로,
    모든 플랫폼에 대해 표준화된 클러스터 인터페이스를 제공 해 주고, 이전 버전에서는 없었던
    새로운 고가용 서비스를 제공해 준다.
    2. CRS 핵심 기능
    CRS와 10g RAC를 설치하기 전에, CRS및 10g RAC에 대해 사전에 알아 두어야 할 사항이 있다 :
    - 10g RAC를 설치를 위해서는 CRS는 사전에 설치 되고 실행되어야 한다.
    - CRS는 하드웨어 공급 업체에서 제공하는 클러스터 제품 (예 : Sun Cluster,
    HP Serviceguard, IBM HACMP, TruCluster, Veritas Cluster, Fujitsu Primecluster,
    기타 ...) 위에서 실행 될 수도 있고, 하드웨어 공급 업체에서 제공하는 클러스터 제품
    없이도 실행될 수 있다. 하드웨어 업체에서 공급하는 클러스터 제품은 9i RAC까지는 반드시
    필요했지만, 10g RAC에서는 선택 사항이다.
    - CRS HOME 과 ORACLE_HOME 은 반드시 다른 디렉토리에 설치 되어야 한다.
    - CRS를 설치하기 전에, voting 파일 또는 OCR (Oracle Configuration Repository) 파일을
    설치 할 수 있는 공유된 디렉토리 또는 디바이스가 셋업되어야 한다. voting file은 최소 20MB 정도
    크기이며, OCR 파일은, 최소 100MB 크기가 되어야 한다.
    - CRS 및 RAC를 설치하기 위해서는 다음과 같은 네트워크 인터페이스가 구성되어야 한다 :
    - Public Interface
    - Private Interface
    - Virtual (Public) Interface
    관련된 추가적인 정보는 <Bulletin No: 22345> 참조.
    - CRS 설치 후 root.sh를 실행시키면 CRS 서비스를 구동시킨다. 만약 CRS가 정상적으로
    구동되지 않는다면, Note 240001.1 참조.
    - RAC 노드당 1개의 CRS 데모만 실행 가능.
    - 유닉스 시스템의 경우, CRS 서비스는 /etc/inittab 상의 ‘respawn’ entry로 등록되어 있다.
    - 네트워크 split이 있을 경우 (노드간 통신 두절) data corruption을 방지 하기 위해 하나
    또는 그 이상의 노드에서 리부팅이 발생할 수 있다.
    - CRS 서비스를 구동시키는 올바른 방법은 장비를 부팅시키는 것이다.
    - 서비스를 중단시키는 올바른 방법은, 장비를 shutdown 시키거나, "init.crs stop" 명령을
    실행시키는 것이다.
    - CRS 데몬을 kill 시키는 것은 올바른 방법이 아니며, 오직 설치된 CRS를 제거한 경우에만
    적용해도 되는 방법이다. (Bulletin No: 22343 참조) 이것은 , 플래그 파일에 불일치가 발생 할
    수 있기 때문이다.
    - 시스템 유지 보수를 위해서는, OS를 단일 사용자 모드 (single user mode)로 전환한다.
    서비스 스택이 구동되면, ps -ef 명령으로 관련된 데몬 프로세스를 확인 할 수 있다 :
    [rac1]/u01/home/beta> ps -ef | grep crs
    oracle 1363 999 0 11:23:21 ? 0:00 /u01/crs_home/bin/evmlogger.bin -o /u01
    oracle 999 1 0 11:21:39 ? 0:01 /u01/crs_home/bin/evmd.bin
    root 1003 1 0 11:21:39 ? 0:01 /u01/crs_home/bin/crsd.bin
    oracle 1002 1 0 11:21:39 ? 0:01 /u01/crs_home/bin/ocssd.bin
    3. CRS DAEMON 기능
    다음은 각각의 CRS 데몬 프로세스에 대한 간략한 설명이다 :
    CRSD:
    - HA 작업을 위한 엔진
    - '애플리케이션 자원'관리
    - '애플리케이션 자원'을 구동, 정지, fail over 처리
    - 애플리케이션 자원 구동/정지/점검 하기 위한 별도의 'actions'을 spawn
    - OCR(Oracle Configuration Repository)의 구성 프로파일 관리
    - OCR의 현재 알려진 상태를 저장
    - root 권한으로 실행
    - 장애 발생시 자동으로 재 구동됨
    OCSSD:
    - OCSSD는 RAC의 일부로, ASM과 함께 단일 인스턴스를 구성함
    - 노드 멤버쉽에 대한 액세스를 제공
    - 그룹 서비스 제공
    - 기본적인 클러스터 lock 기능 제공
    - 하드웨어 공급 업체에서 제공하는 클러스터 소프트웨어가 설치되어 있을 경우, 통합을 실시
    - 하드웨어 공급 업체에서 제공하는 클러스터 소프트웨어 없이도 실행 가능
    - 오라클 계정으로 실행
    - 장애로 인한 종료시 시스템 리부팅됨
    --- 리부팅은 split brain 현상 발생시, 데이터 corruption 방지를 목적으로 함.
    EVMD:
    - 특정한 사건 발생 시 이벤트 생성
    - 자식 프로세스로 evmlogger를 spawn 시킴
    - Evmlogger는 필요시 자식 프로세스를 spawn 시킴
    - callout directory를 스캔하고 callout을 호출
    - 오라클 계정으로 실행.
    - 장애로 인한 종료시 자동으로 재 구동됨
    4. CRS 로그 디렉토리
    CRS 문제의 원인을 추적할 때는, CRS 홈 디렉토리 아래 디렉토리를 살펴보는 것이
    중요하다.
    $ORA_CRS_HOME/crs/log - 이 디렉토리는, CRS 자원들에 대한 트레이스를 포함하며,
    CRS에 의해 식별된 가입(joining), 탈퇴(leaving), 재구동(restarting), 재배치(relocating)와
    관련된 정보들이 기록된다.
    $ORA_CRS_HOME/crs/init - crsd.bin 데몬과 관련된 모든 core dump가 기록된다.
    $ORA_CRS_HOME/css/log - css 로그는, 재구성(reconfiguration)이나, 성공하지
    못한 체크인 (missed checkin), 클라이언트의 css listener로 부터 발생한 연결(connect) 및
    연결해제(disconnect)와 관련된 모든 액션을 기록한다. 때에 따라서는 로거에서는 (auth.crit)
    유형의 메시지를 남기는데 이것은 오라클에 의해 리부팅이 발생할 때 남는다. 이 정보는
    리부팅이 정확히 언제 발생했는지를 확인하는데 사용될 수 있다.
    $ORA_CRS_HOME/css/init - 기본적으로는 ocssd로 부터의 core dump 파일을 저장하며, 프로세스의
    종료가 심각한 문제로 간주되는 css 데몬의 pid 정보 또한 기록된다. css의 비정상 재 구동이 발생할
    경우, core 파일은, core.<pid> 형태로 기록된다.
    $ORA_CRS_HOME/evm/log - evn과 evmlogger 데몬의 로그 파일이 기록된다. CRS 또는 CSS 관련 디렉토리
    처럼 디버깅 용도로 자주 사용되지는 않는다.
    $ORA_CRS_HOME/evm/init - EVM의 pid와 lock 파일이 저장된다. EVM으로 부터 발생한 core 파일 또한
    이 디렉토리에 저장된다. 디버깅을 위해서는 Note 1812.1 참조.
    $ORA_CRS_HOME/srvm/log - OCR을 위한 로그 파일.
    5. CRS 자원의 상태
    RAC를 설치하고, RAC root.sh을 실행시키면 VIPCA (Virtual IP Configuration Assistant)가
    구동된다. crs_stat 명령을 이용하여 모든 CRS 자원을 확인할 수 있다. 예 :
    cd $ORA_CRS_HOME/bin
    ./crs_stat
    NAME=ora.rac1.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE
    NAME=ora.rac1.oem
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE
    NAME=ora.rac1.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE
    NAME=ora.rac1.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE
    NAME=ora.rac2.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE
    NAME=ora.rac2.oem
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE
    NAME=ora.rac2.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE
    NAME=ora.rac2.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE
    CRS 자원을 읽기 쉬운 형태로 확인하기 위한 스크립트 또한 사용할 수 있다.
    다음은 shell script의 예이다 :
    --------------------------- Begin Shell Script -------------------------------
    #!/usr/bin/ksh
    # Sample 10g CRS resource status query script
    # Description:
    # - Returns formatted version of crs_stat -t, in tabular
    # format, with the complete rsc names and filtering keywords
    # - The argument, $RSC_KEY, is optional and if passed to the script, will
    # limit the output to HA resources whose names match $RSC_KEY.
    # Requirements:
    # - $ORA_CRS_HOME should be set in your environment
    RSC_KEY=$1
    QSTAT=-u
    AWK=/usr/xpg4/bin/awk # if not available use /usr/bin/awk
    # Table header:echo ""
    $AWK \
    'BEGIN {printf "%-45s %-10s %-18s\n", "HA Resource", "Target", "State";
              printf "%-45s %-10s %-18s\n", "-----------", "------", "-----";}'
    # Table body:
    $ORA_CRS_HOME/bin/crs_stat $QSTAT | $AWK \
    'BEGIN { FS="="; state = 0; }
    $1~/NAME/ && $2~/'$RSC_KEY'/ {appname = $2; state=1};
    state == 0 {next;}
    $1~/TARGET/ && state == 1 {apptarget = $2; state=2;}
    $1~/STATE/ && state == 2 {appstate = $2; state=3;}
    state == 3 {printf "%-45s %-10s %-18s\n", appname, apptarget, appstate; state=0;}'
    --------------------------- End Shell Script -------------------------------
    실행 결과 예시 :
    [opcbsol1]/u01/home/usupport> ./crsstat
    HA Resource Target State
    ora.V10SN.V10SN1.inst ONLINE ONLINE on opcbsol1
    ora.V10SN.V10SN2.inst ONLINE ONLINE on opcbsol2
    ora.V10SN.db ONLINE ONLINE on opcbsol2
    ora.opcbsol1.ASM1.asm ONLINE ONLINE on opcbsol1
    ora.opcbsol1.LISTENER_OPCBSOL1.lsnr ONLINE ONLINE on opcbsol1
    ora.opcbsol1.gsd ONLINE ONLINE on opcbsol1
    ora.opcbsol1.ons ONLINE ONLINE on opcbsol1
    ora.opcbsol1.vip ONLINE ONLINE on opcbsol1
    ora.opcbsol2.ASM2.asm ONLINE ONLINE on opcbsol2
    ora.opcbsol2.LISTENER_OPCBSOL2.lsnr ONLINE ONLINE on opcbsol2
    ora.opcbsol2.gsd ONLINE ONLINE on opcbsol2
    ora.opcbsol2.ons ONLINE ONLINE on opcbsol2
    ora.opcbsol2.vip ONLINE ONLINE on opcbsol2
    6. CRS 자원 관리
    자원을 관리하기 위해서는, srvctl 명령을 사용한다. 다음은 명령어 문법 예제이다.
    1) CRS 자원 상태
    srvctl status database -d <database-name> [-f] [-v] [-S <level>]
    srvctl status instance -d <database-name> -i <instance-name> >[,<instance-name-list>]
    [-f] [-v] [-S <level>]
    srvctl status service -d <database-name> -s <service-name>[,<service-name-list>]
    [-f] [-v] [-S <level>]
    srvctl status nodeapps [-n <node-name>]
    srvctl status asm -n <node_name>
    예제:
    데이터베이스의 상태, 모든 인스턴스와 모든 서비스
    srvctl status database -d ORACLE -v
    이름이 부여된 인스턴스의 상태와 현재 서비스
    srvctl status instance -d ORACLE -i RAC01, RAC02 -v
    이름이 부여된 서비스의 상태.
    srvctl status service -d ORACLE -s ERP -v
    데이터베이스 애플리케이션을 지원하는 모든 노드의 상태.
    srvctl status node
    2) CRS 자원의 구동
    srvctl start database -d <database-name> [-o < start-options>]
    [-c <connect-string> | -q]
    srvctl start instance -d <database-name> -i <instance-name>
    [,<instance-name-list>] [-o <start-options>] [-c <connect-string> | -q]
    srvctl start service -d <database-name> [-s <service-name>[,<service-name-list>]]
    [-i <instance-name>] [-o <start-options>] [-c <connect-string> | -q]
    srvctl start nodeapps -n <node-name>
    srvctl start asm -n <node_name> [-i <asm_inst_name>] [-o <start_options>]
    예제:
    데이터베이스를 모든 활성화된 인스턴스와 함께 구동.
    srvctl start database -d ORACLE
    이름이 부여된 인스턴스의 구동.
    srvctl start instance -d ORACLE -i RAC03, RAC04
    이름이 부여된 서비스의 구동. 연관된 인스턴스는 필요시 구동됨.
    srvctl start service -d ORACLE -s CRM
    이름이 부여된 인스턴스의 서비스의 구동.
    srvctl start service -d ORACLE -s CRM -i RAC04
    노드 애플리케이션의 구동.
    srvctl start nodeapps -n myclust-4
    3) CRS 자원의 정지
    srvctl stop database -d <database-name> [-o <stop-options>]
    [-c <connect-string> | -q]
    srvctl stop instance -d <database-name> -i <instance-name> [,<instance-name-list>]
    [-o <stop-options>][-c <connect-string> | -q]
    srvctl stop service -d <database-name> [-s <service-name>[,<service-name-list>]]
    [-i <instance-name>][-c <connect-string> | -q] [-f]
    srvctl stop nodeapps -n <node-name>
    srvctl stop asm -n <node_name> [-i <asm_inst_name>] [-o <start_options>]
    예제:
    데이터베이스, 모든 인스턴스, 모든 서비스를 정지 시킴.
    srvctl stop database -d ORACLE
    이름이 부여된 인스턴스를 정지 시킴. 그 전에 우선 존재하는 모든 서비스를 재배치 함.
    srvctl stop instance -d ORACLE -i RAC03,RAC04
    서비스를 정지시킴.
    srvctl stop service -d ORACLE -s CRM
    이름이 부여된 인스턴스의 서비스를 정지 시킴.
    srvctl stop service -d ORACLE -s CRM -i RAC04
    노드 애플리케이션을 정지 시킴. 인스턴스와 서비스 역시 정지됨.
    srvctl stop nodeapps -n myclust-4
    4) CRS 자원의 추가
    srvctl add database -d <name> -o <oracle_home> [-m <domain_name>] [-p <spfile>]
    [-A <name|ip>/netmask] [-r {PRIMARY | PHYSICAL_STANDBY | LOGICAL_STANDBY}]
    [-s <start_options>] [-n <db_name>]
    srvctl add instance -d <name> -i <inst_name> -n <node_name>
    srvctl add service -d <name> -s <service_name> -r <preferred_list>
    [-a <available_list>] [-P <TAF_policy>] [-u]
    srvctl add nodeapps -n <node_name> -o <oracle_home>
    [-A <name|ip>/netmask[/if1[|if2|...]]]
    srvctl add asm -n <node_name> -i <asm_inst_name> -o <oracle_home>
    OPTIONS:
    -A vip range, node, and database, address specification. The format of
    address string is:
    [<logical host name>]/<VIP address>/<net mask>[/<host interface1[ |
    host interface2 |..]>] [,] [<logical host name>]/<VIP address>/<net mask>
    [<host interface1[ | host interface2 |..]>]
    -a for services, list of available instances, this list cannot include
    preferred instances
    -m domain name with the format “us.mydomain.com”
    -n node name that will support one or more instances
    -o $ORACLE_HOME to locate Oracle binaries
    -P for services, TAF preconnect policy - NONE, PRECONNECT
    -r for services, list of preferred instances, this list cannot include
    available instances.
    -s spfile name
    -u updates the preferred or available list for the service to support the
    specified instance. Only one instance may be specified with the -u
    switch. Instances that already support the service should not be
    included.
    예제:
    새로운 노드의 추가.
    srvctl add nodeapps -n myclust-1 -o $ORACLE_HOME ?A
    139.184.201.1/255.255.255.0/hme0
    새로운 데이터 베이스의 추가.
    srvctl add database -d ORACLE -o $ORACLE_HOME
    이미 존제하는 데이터베이스에 이름이 부여된 인스턴스 추가.
    srvctl add instance -d ORACLE -i RAC01 -n myclust-1
    srvctl add instance -d ORACLE -i RAC02 -n myclust-2
    srvctl add instance -d ORACLE -i RAC03 -n myclust-3
    서비스를 이미 존재하는 데이터베이스에 추가하며, 선호되는 인스턴스를 지정 (-r)하고,
    가용한 인스턴스를 지정함(-a). 가용 인스턴스에 대해서는 기본 failover를 사용함.
    srvctl add service -d ORACLE -s STD_BATCH -r RAC01,RAC02 -a RAC03,RAC04
    이미 존재하는 데이터베이스에 선호되는 인스턴스를 list 1, 가용한 인스턴스를 list 2에
    추가함. 가용 인스턴스에 대해서는 사전연결 (preconnect) 방식을 사용함.
    srvctl add service -d ORACLE -s STD_BATCH -r RAC01,RAC02 -a RAC03,RAC04 -P PRECONNECT
    5) CRS RE자원의 제거
    srvctl remove database -d <database-name>
    srvctl remove instance -d <database-name> [-i <instance-name>]
    srvctl remove service -d <database-name> -s <service-name> [-i <instance-name>]
    srvctl remove nodeapps -n <node-name>
    예제:
    데이터베이스에 대한 애플리케이션의 제거.
    srvctl remove database -d ORACLE
    이미 존재하는 데이터베이스의 이름이 부여된 인스턴스에 대한 애플리케이션 제거.
    srvctl remove instance -d ORACLE -i RAC03
    srvctl remove instance -d ORACLE -i RAC04
    서비스 제거.
    srvctl remove service -d ORACLE -s STD_BATCH
    인스턴스로부터 서비스 제거.
    srvctl remove service -d ORACLE -s STD_BATCH -i RAC03,RAC04
    노드로 부터 모든 노드 애플리케이션 제거.
    srvctl remove nodeapps -n myclust-4
    6) CRS 자원의 변경
    srvctl modify database -d <name> [-n <db_name] [-o <ohome>] [-m <domain>]
    [-p <spfile>] [-r {PRIMARY | PHYSICAL_STANDBY | LOGICAL_STANDBY}]
    [-s <start_options>]
    srvctl modify instance -d <database-name> -i <instance-name> -n <node-name>
    srvctl modify instance -d <name> -i <inst_name> {-s <asm_inst_name> | -r}
    srvctl modify service -d <database-name> -s <service_name> -i <instance-name>
    -t <instance-name> [-f]
    srvctl modify service -d <database-name> -s <service_name> -i <instance-name>
    -r [-f]
    srvctl modify nodeapps -n <node-name> [-A <address-description> ] [-x]
    OPTIONS:
    -i <instance-name> -t <instance-name> the instance name (-i) is replaced by the
    instance name (-t)
    -i <instance-name> -r the named instance is modified to be a preferred instance
    -A address-list for VIP application, at node level
    -s <asm_inst_name> add or remove ASM dependency
    예제:
    인스턴스가 다른 노드에서 실행되도록 변경.
    srvctl moinstance -d ORACLE -n myclust-4
    서비스가 다른 노드에서 실행되도록 변경.
    srvctl modify service -d ORACLE -s HOT_BATCH -i RAC01 -t RAC02
    인스턴스가 서비스의 선호되는 인스턴스가 되도록 변경.
    srvctl modify service -d ORACLE -s HOT_BATCH -i RAC02 ?r
    7) SERVICE의 재 배치
    srvctl relocate service -d <database-name> -s <service-name> [-i <instance-name >]-t<instance-name > [-f]
    예제:
    서비스를 한 인스턴스에서 다른 인스턴스로 재 배치
    srvctl relocate service -d ORACLE -s CRM -i RAC04 -t RAC01
    8) CRS 자원을 활성화 (자원은 이 기능을 사용할 당시 실행중이거나, 정지된 상태일 수 있음)
    srvctl enable database -d <database-name>
    srvctl enable instance -d <database-name> -i <instance-name> [,<instance-name-list>]
    srvctl enable service -d <database-name> -s <service-name>] [, <service-name-list>] [-i <instance-name>]
    예제:
    데이터베이스를 활성화.
    srvctl enable database -d ORACLE
    이름이 부여된 인스턴스의 활성화.
    srvctl enable instance -d ORACLE -i RAC01, RAC02
    서비스의 활성화.
    srvctl enable service -d ORACLE -s ERP,CRM
    이름이 부여된 인스턴스에서 서비스의 활성화.
    srvctl enable service -d ORACLE -s CRM -i RAC03
    9) CRS 자원의 비활성화 (자원은 이 기능을 사용할 당시 정지된 상태 이어야만 함)
    srvctl disable database -d <database-name>
    srvctl disable instance -d <database-name> -i <instance-name> [,<instance-name-list>]
    srvctl disable service -d <database-name> -s <service-name>] [,<service-name-list>] [-i <instance-name>]
    예제:
    데이터베이스를 전역(global) 비활성화 시킴.
    srvctl disable database -d ORACLE
    이름이 부여된 인스턴스의 비활성화.
    srvctl disable instance -d ORACLE -i RAC01, RAC02
    서비스를 전역(global) 비활성화.
    srvctl disable service -d ORACLE -s ERP,CRM
    이름이 부여된 인스턴스상의 서비스를 비 활성화.
    srvctl disable service -d ORACLE -s CRM -i RAC03,RAC04
    추가 정보는 Oracle10g Real Application Clusters Administrator's Guide - Appendix B 참조
    Example
    Reference Documents
    <Note:259301.1> CRS and 10g Real Application Clusters

    To download the registered logos by Oracle for OCP, OCA, OCE, & OCM Certifications.
    You have to request to Oracle Exam Support Team to provide the link and the credentials (User Name/Password) to download the same.
    Mail to the following E-Mail: [email protected]
    Note 1: To get the response on time, you may need to provide your prometric information details i.e. Exam Passed Date, Prometric ID, Full Name, and Corresponding Address.
    Note 2: You will never have to disclose your credentials (User Name/Password) to anybody, as Oracle is going to give this for you especially.
    Regards,
    Sabdar Syed,
    http://sabdarsyed.blogspot.com

  • Real Application Clusters [upgrade] INVALID

    Hi,
    I was upgrading an Oracle Apps 9i database to 10g (to upgrade the 11i to R12) and when I ran the upgrade info utility, in the section Components I have ---->Real Application Clusters [upgrade] INVALID.. It is the only one with invalid.
    I have no RAC, but I want to put this on RAC.
    What I have to do ?
    thanks,
    Dana

    What I have to do ?You have to do nothing :)
    Since you do not have RAC, then the status column of the "Real Application Clusters" component should show 'INVALID'
    but I want to put this on RACYou can do that later, once the upgrade is done.

  • Running EBS on Real Application Clusters

    Is there a best practices paper for setting up EBS on RAC?
    Thanks

    Hi,
    Please refer to these docs.
    Oracle E-Business Suite and Oracle Real Application Clusters Documentation Roadmap [ID 745759.1]
    Oracle E-Business Suite Release 11i High Availability Documentation Roadmap [ID 1072807.1]
    Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]
    Thanks,
    Hussein

Maybe you are looking for