Oracle clusterware upgrade 10.2.0.4
Will there be any separate patch to upgrade oracle clusterware from 10.2.0.1 to 10.2.0.4....
why because we installed oracle clusterware 10.2.0.1 and Oracle RAC database 10.2.0.1 and upgraded with patch 10.2.0.4.....which upgraded both clusterware and database to 10.2.0.4
Now due to some problems clusterware got crashed and we installed new clusterware 10.2.0.1 and need to upgrade clusterware to 10.2.0.4 with out touching the Oracle RAC database which is already upgraded to 10.2.0.4...
early response is appreciated
Clusterware sits in its own home ... what specifically is the issue not answered by the docs so we can help with the current issue?
Installation docs can be found at http://docs.oracle.com and there is additional support at metalink.
Similar Messages
-
Oracle 10g to 11g Upgrade - Oracle Clusterware problem
Oracle10g RAC (2 Nodes) RHEL 4 64bit
Hi All,
I have began the procedure for upgrading Oracle Clusterware to 11g. However, during the install OUI was giving me certain error messages like it couldn't transfer the OUI installlogs to node 2. Well, I kept pushing through the install and after I ran the last rootupgrade script on node 2 it gave me the following error:
Checking the existence of nodeapps on this node
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Creating '/crs/home/install/paramfile.crs' with data used for CRS configuration
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Failed to retrieve VIP details
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Failed to retrieve VIP details
Setting CRS configuration values in /crs/home/install/paramfile.crs
So I ignored the error for the time being and after that I checked the status of crs and it gave me the following:
[oracle@vtl-rac2 crsd]$ crsstatus
HA Resource Target State
ora.VMRACDEV.VMRACDEV1.inst ONLINE ONLINE on vtl-rac1
ora.VMRACDEV.VMRACDEV2.inst ONLINE ONLINE on vtl-rac2
ora.VMRACDEV.db ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.ASM1.asm ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.LISTENER_VTL-RAC1.lsnr ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.gsd ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.ons ONLINE OFFLINE
ora.vtl-rac1.vip ONLINE ONLINE on vtl-rac1
ora.vtl-rac2.ASM2.asm ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.LISTENER_VTL-RAC2.lsnr ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.gsd ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.ons ONLINE OFFLINE
ora.vtl-rac2.vip ONLINE ONLINE on vtl-rac2
So i tried to bring it back up by doing a crs_stop -all and crs_start -all and it gave me the following error:
vtl-rac1 : CRS-1019: Resource ora.vtl-rac2.ons (application) cannot run on vtl-rac1
Start of `ora.vtl-rac1.ons` on member `vtl-rac1` failed.
vtl-rac2 : CRS-1019: Resource ora.vtl-rac1.ons (application) cannot run on vtl-rac2
CRS-0223: Resource 'ora.VMRACDEV.db' has placement error.
CRS-0215: Could not start resource 'ora.vtl-rac1.ons'.
CRS-0215: Could not start resource 'ora.vtl-rac2.ons'.
I am thinking that all of this is caused by the various issues I had with the install. If I am incorrect, then please let me know. If it is true, I would like to know if there are any 11g docs on how to clean up a failed clusterware upgrade. Any advice would be greatly appreciated on any of the situations I am having.
Thank youHi Chandra,
Did CVU report any problems before the upgrade?No, there were no errors reported by CVU before the upgrade.
I don't there is note out there for cleaning 11g CRS
install...and I think can very use the 10g CRS note -
239998.1.Yeah I might have to go that way.
I have both the 11g CRS install and upgrade from 10g
to 11CRS at
http://chandradba.blogspot.com/2007/08/oracle-11g-rac-
install-on-red-hat-50.html
and
http://chandradba.blogspot.com/2008/02/oracle-10g-crs-
upgrade-to-11g-crs.html
see if it helps.Yup, your guide is very simple, clear and error proof :) That's how mine when pretty much except right around 75% I started getting these strange errors of files not being able to be transferred to node 2. Anyways, it shouldn't be a problem as none of those errors were configuration related...or else I would have a messed up cluster.
Well, I actually rebooted both machines and now the whole CRS stack is up!! So I guess I am ok. We'll just have to wait and see.
Thanks for your help Chandra...I always appreciate it. -
We have two node clusterware installed and we want to upgrade the oracle clusterware from 10.2.0.4 to 11.2.0.2 can any one share the steps for upgrade.
Regards
Naveen DuttHi Rajeys,
I read all the documents but i was not able to find the information that i was looking. Below i am providing my cluster node configuration and version -
1) No of Node in cluster - 2 (node1 ,node2)
2) OCR (clusterware) version - 10.2.0.4
3) Storage type - NAS storage (we are not using ASM).
Now link provided by you is to upgrade ASM from 10.2.0.3 to 11GR2 but we are not using ASM as storage we are using NAS storage. Do we have any link or document that help me to upgrade oracle clusterware only without ASM from version 10.2.0.4 to 11.2.0.2 .
Thanks in advance
Regards
Naveen Dutt -
From wehre can I download Oracle Clusterware 11.1.0.7 (upgrade)
I need to upgrade my Clusterware installation to version 11.1.0.7, but I can't find a place from where to download it (Google doesn't help).
I've installed Oracle Clusterware 11g Release 1 (11.1.0.6.0) for Linux x86-64 from this page:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/111060-linx8664soft-099033.html
Please, if you know, tell me where can I find Clusterware 11.1.0.7 (for Redhat 5.4 64x).
Thank you.Yes, you need a valid CSI (customer support identifier) to access the metalink support.
Regards
Asif Kabir
-- If you got the answer close the thread as well. -
Oracle Clusterware installation 10gR1 install and upgrade
Hi Experts,
I will install RAC in window 32 bit 2003.
My database is 10GR4.
So i need to download Oracle Clusterware 10GR1 and upgrate to 10GR4 and match database version.
Any experience is welcom for upgrated Oracle Clusterware to 10G R4.
JimThanks for your help.
I only see
Oracle Database Real Application Testing Downloads in TNS. Where do I need to download oracle cluster software?
I will check that ID in metalink.
Thnaks,
Jim -
Where can I find the Oracle Clusterware 11.1.0.7 for Linux x86
Hello,
I am testing upgrading Oracle 11g RAC from 11.1.0.6 to 11.1.0.7 on Linu x86 (RedHat 5.3/OEL 5.3)
I haven't been able to find the Oracle Clusterware 11.1.0.7 for Linux x86 download, which is required for the RAC upgrade.
Could someone tell me the patch/patchset number or how can I search for it in metalink?
Thanks!Hi,
You need to download patch 6890831
Please see the metalink note 800603.1 for 11.1.0.7 patch set and installation instructions for Linux x86.
Hope this helps.
Regards
Satishbabu Gunukula
http://oracleracexpert.blogspot.com
[Click here to delete archive logs using RMAN|http://oracleracexpert.blogspot.com/2009/08/delete-archive-logs-using-rman.html]
[Click here for Oracle Data pump export/Import with Examples|http://oracleracexpert.blogspot.com/2009/08/oracle-data-pump-exportimport.html]
Edited by: Satishbabu Gunukula on Aug 26, 2009 10:32 PM -
Oracle Clusterware Configuration Assistant fails
I am installing clusterware 11.1.0.6 and the runcluvfy commands all came back as passed, except for the VIP, which the documentation says to ignore. The whole install goes to 100%, then it runs the configuration assistants.
It falls over on the first of these: Oracle Configuration Assistant. If I retry it, the same addition is placed in the logfile, as below:
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\11.1.0\crs/install/crssetup.config.bat
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: vm-rac1 vm-rac1-priv vm-rac1
node 2: vm-rac2 vm-rac2-priv vm-rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\11.1.0\crs)
Step 3: configuring OCR repository
Oracle Cluster Registry already initialized
Step 4: configuring safe mode for CRS stack
Step 5: Starting up CRS stack on all nodes
vm-rac1 failed to startup service OracleCSService, err(1068)
vm-rac2 failed to startup service OracleCSService, err(1068)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\11.1.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\11.1.0\crs
Configuration directory is set to C:\oracle\11.1.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is null
INFO: Since the option is to overwrite the existing C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands.bak.1
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
Please help.Sorry:
alertvm-rac1.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:25.531
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.609
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.671
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.687
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:28.921
[client(3792)]CRS-1013:The OCR at \\.\ocrcfg was successfully formatted using version 2. Ignore earlier CRS-1006 messages if any.
2009-05-20 15:44:40.875
[client(3796)]CRS-1801:Cluster vm-rac_cluster configured with nodes vm-rac1 vm-rac2 .
client\clscfg.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 16:31:03.796: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.812: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.875: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.875: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.921: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.937: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
client\clsfmt.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:40.031: [ OCROSD][3872]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:40.031: [ OCROSD][3872]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:40.187: [ CLSFMT][3872]clsfmt: successfully initialized file \\.\votedsk1
client\ocrconfig_3788.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:25.453: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.484: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.484: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.531: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.562: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.562: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.562: [ OCRCONF][3792]ocrconfig starts...
2009-05-20 15:44:25.578: [ OCRCONF][3792]Upgrading OCR data
2009-05-20 15:44:25.609: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.609: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.609: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.609: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.609: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.609: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.609: [ OCRCONF][3792]Exporting OCR data to [OCRUPGRADEFILE]
2009-05-20 15:44:25.640: [ OCRAPI][3792]a_init:7!: Backend init unsuccessful : [33]
2009-05-20 15:44:25.640: [ OCRCONF][3792]There was no previous version of OCR. error:[PROC-33: Oracle Cluster Registry is not configured]
2009-05-20 15:44:25.656: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.671: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.671: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.671: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.671: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.671: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.687: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.687: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.687: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.703: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.703: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.875: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.921: [ OCRRAW][3792]propriowv: Vote information on disk 0 [\\.\ocrcfg] is adjusted from [0/0] to [2/2]
2009-05-20 15:44:28.921: [ OCRRAW][3792]iniconfig:No 92 configuration
2009-05-20 15:44:28.921: [ OCRAPI][3792]a_init:6a: Backend init successful
2009-05-20 15:44:30.593: [ OCRCONF][3792]Initialized DATABASE keys in OCR
2009-05-20 15:44:31.453: [ OCRCONF][3792]csetskgfrblock0: output from clsmft: [clsfmt: Failure trying to resize OCR file \\.\ocrcfg
from 10725732864 bytes to 10725736448 bytes
clsfmt: successfully initialized file \\.\ocrcfg
g
2009-05-20 15:44:31.531: [ OCRCONF][3792]Successfully set skgfr block 0
2009-05-20 15:44:31.531: [ OCRCONF][3792]Exiting [status=success]...
So, it seems to be all about the OCR not setup correctly, however, all I've done is follow the notes. This was a 'clean' VM install of win2003 Server, so nothing has been accidently tinkered with. -
Clusterware upgrade to 10.2.0.4
Will there be any separate patch to upgrade oracle clusterware from 10.2.0.1 to 10.2.0.4....
why because we installed oracle clusterware 10.2.0.1 and Oracle RAC database 10.2.0.1 and upgraded with patch 10.2.0.4.....which upgraded both clusterware and database to 10.2.0.4
Now due to some problems clusterware got crashed and we installed new clusterware 10.2.0.1 and need to upgrade clusterware to 10.2.0.4 with out touching the Oracle RAC database which is already upgraded to 10.2.0.4...
early response is appreciatedAIX is the operating system..... we installed new CRS ans it is functioning properly but now the problem is Clusterware version is 10.2.0.1 and ORacle RAC database version is 10.2.0.4.....
I read in some docs where Clusterware version should be same or newer level with Oracle RAC database home...
If there any patch can u just give the patch number for Clusterware 10.2.0.4....so that it can be downloaded from metalink..... -
Installing RAC Problem: Oracle Clusterware 10g is present on remote node
Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller in the first VM rac1 from step 1 to step 9 of 10.
On the step 9 of 10 in the Wizard, accidentally, I touch the Mouse, and the Wizard is gone.
The directory for installing Grid in the 2 VMs is the same: /u01
In order to make sure everything is correct, I delete entire directory /u01 in the 2 VMs and install Grid in rac1 again.
But get the error message as follows:
[INS-40915] The Installer has detected the presence of Oracle Clusterware 10g on the remote node rac2.localdomain.
Cause: Oracle Clusterware 10g is present on remote node rac2.localdomain but not on the local node.
Action: To upgrade the Oracle Clusterware 10g Installation to this release, run Installer on a node where Oracle Clusterware 10 installation is located. To create a new cluster, choose a set of nodes that are not part of an existing cluster.
Regarding the above error message, I do not install any Oracle Clusterware 10g in rac2 because it's the first time when I install Grid using rac1 and rac2.
My question is:
Do any folk understand how to remove something in rac2 to solve the above issue so that I can install Grid again ?
Thanks.Folks,
Hello. Thanks a lot for replying.
The tutorial http://docs.oracle.com/cd/E11882_01/install.112/e22489/rem_orcl.htm#CBHEFHAC is about the regular procedure to deinstall Grid Clusterware and Database.
I have just installed Grid and have not installed the Database. I have removed ORACLE HOME /u01 completely in both VMs. There is no way to follow the regular procedure to deinstall at this time.
I do not install any Oracle Clusterware 10g in the VM rac2 because it's the first time when I install Grid using VM rac1 and rac2.
When install Grid again. I get the error message:
"[INS-40915] The Installer has detected the presence of Oracle Clusterware 10g on the remote node rac2.localdomain."
This is strange! It seems that we need to remove some files in the VM rac2 like /etc/oracle that I am not sure.
My questions are:
First, where is 10g directory to remove ?
Second, what files left on the system to clean up ?
Third, what does " Follow 239998.1" means regarding asanqa's replying to me ?
Thanks. -
Hidden parameters appears after Oracle 11gR2 upgrade
Platform: HP-UX B.11.31 U ia64
Upgrading from: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Upgrading to : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Issue : There are around 130 hidden parameter appear after Oracle 11gR2 upgrade.
Before upgrade I have commented the hidden parameters on the PFILE. PFILE only to start the database for the Oracle 11gR2 upgrade.
Before upgrade, checking the hidden parameter:
SQL> SELECT name,description from SYS.V$PARAMETER WHERE name LIKE '\_%' ESCAPE '\';
optimizerextended_cursor_sharing_rel
optimizer extended cursor sharing for relational operators
allowlevel_without_connect_by
allow level without connect by
I am using client parameter file ( PFILE ) commented the hidden parameters highlighted above.
However after successful upgrade to 11gR2, creating SPFILE from the PFILE ( commented the hidden parameters) now i am getting 132 hidden parameters.
SQL> select count(1) from sys.V$PARAMETER where name like '\_%' escape '\';
COUNT(1)
132
SQL> select name from sys.V$PARAMETER where name like '\_%' escape '\';
name
aggregationoptimization_settings
alwaysanti_join
alwayssemi_join
andpruning_enabled
btree_bitmap_plans
bloomfilter_enabled
bloomfolding_enabled
bloompruning_enabled
complexview_merging
compressioncompatibility
connectby_use_union_all
convertset_to_join
costequality_semi_join
cputo_io
dimensionskip_null
eliminatecommon_subexpr
enabletype_dep_selectivity
fastfull_scan_enabled
firstk_rows_dynamic_proration
gbyhash_aggregation_enabled
generalizedpruning_enabled
globalindexpnum_filter_enabled
gsanti_semi_join_allowed
improvedouterjoin_card
improvedrow_length_enabled
indexjoin_enabled
ksbrestart_policy_times
leftnested_loops_random
localcommunication_costing_enabled
minimalstats_aggregation
mmvquery_rewrite_enabled
newinitial_join_orders
newsort_cost_estimate
nljbatching_enabled
optimadjust_for_part_skews
optimenhance_nnull_detection
optimnew_default_join_sel
optimpeek_user_binds
optimizeradaptive_cursor_sharing
optimizerbetter_inlist_costing
optimizercbqt_no_size_restriction
optimizercoalesce_subqueries
optimizercomplex_pred_selectivity
optimizercompute_index_stats
optimizerconnect_by_combine_sw
optimizerconnect_by_cost_based
optimizerconnect_by_elim_dups
optimizercorrect_sq_selectivity
optimizercost_based_transformation
optimizercost_hjsmj_multimatch
optimizercost_model
optimizerdim_subq_join_sel
optimizerdistinct_agg_transform
optimizerdistinct_elimination
optimizerdistinct_placement
optimizereliminate_filtering_join
optimizerenable_density_improvements
optimizerenable_extended_stats
optimizerenable_table_lookup_by_nl
optimizerenhanced_filter_push
optimizerextend_jppd_view_types
optimizerextended_cursor_sharing
optimizerextended_cursor_sharing_rel
optimizerextended_stats_usage_control
optimizerfalse_filter_pred_pullup
optimizerfast_access_pred_analysis
optimizerfast_pred_transitivity
optimizerfilter_pred_pullup
optimizerfkr_index_cost_bias
optimizerfull_outer_join_to_outer
optimizergroup_by_placement
optimizerimprove_selectivity
optimizerinterleave_jppd
optimizerjoin_elimination_enabled
optimizerjoin_factorization
optimizerjoin_order_control
optimizerjoin_sel_sanity_check
optimizermax_permutations
optimizermode_force
optimizermulti_level_push_pred
optimizernative_full_outer_join
optimizernew_join_card_computation
optimizernull_aware_antijoin
optimizeror_expansion
optimizerorder_by_elimination_enabled
optimizerouter_join_to_inner
optimizerouter_to_anti_enabled
optimizerpush_down_distinct
optimizerpush_pred_cost_based
optimizerrownum_bind_default
optimizerrownum_pred_based_fkr
optimizerskip_scan_enabled
optimizersortmerge_join_inequality
optimizersqu_bottomup
optimizerstar_tran_in_with_clause
optimizersystem_stats_usage
optimizertable_expansion
optimizertransitivity_retain
optimizertry_st_before_jppd
optimizerundo_cost_change
optimizerunnest_corr_set_subq
optimizerunnest_disjunctive_subq
optimizeruse_cbqt_star_transformation
optimizeruse_feedback
orexpand_nvl_predicate
orderednested_loop
parallelbroadcast_enabled
partitionview_enabled
pivotimplementation_method
prerewrite_push_pred
predmove_around
pushjoin_predicate
pushjoin_union_view
pushjoin_union_view2
pxminus_intersect
pxpartition_scan_enabled
pxpwg_enabled
pxual_serial_input
queryrewrite_setopgrw_enable
removeaggr_subquery
replacevirtual_columns
resourcemanager_plan
rightouter_hash_enable
selfjoinmv_duplicates
sqlmodel_unfold_forloops
sqltunecategory_parsed
subquerypruning_enabled
subquerypruning_mv_enabled
tablescan_cost_plus_one
unionrewrite_for_gs
unnestsubquery
usecolumn_stats_for_functionI just came across a similar case: 1 (just one) of our (RAC-) databases has 130-something underscore-parameters set to non-default values.
version is still 11.1.0.7 (e.g. not 11gR2).
All of those hidden parameters seem to be CBO related (list on request).
Weird is: Only one of our (very similar, supposedly same-config) databases have these hidden parameters set.
Colleagues justly wonder: Who, When, What has caused these parameters to be expliclty set for this one system?
Note: we do not have the complete history of this system documented (systems have been managed by 3 different parties already).
It is quite possible they came in with some patch or upgrade (catupgr?) somewhere between 11.1.0.1 and 11.1.0.7, but a confirmation would be nice.
Information welcome.
System info:
Linux hostname 2.6.18-164.9.1.el5 #1 SMP Wed Dec 9 03:27:37 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
Versions
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
5 rows selected. -
Hi,
We are continously getting dumps on our BW Central instance server after we did an Oracle patch upgrade from 9.2.0.6 to 9.2.0.8.
Following is our system environment
SAP Release.............. "640"
Application server....... "abci"
Operating system......... "SunOS"
Release.................. "5.10"
Hardware type............ "sun4v"
Database server.......... "abdb"
Database type............ "ORACLE"
Database name............ "ABP"
Database owner........... "SAPABP"
SAP kernel............... "640"
Database version......... "OCI_920 "
Patch level.............. "175"
Following below is the Core Dump that is generated for any process chains that we schedule on our BW server
Runtime Errors SYSTEM_CORE_DUMPED
Date and Time 14.04.2008 09:26:17
ShrtText
Process terminated by signal 11.
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPMSSY2" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server awci_ABP_00 on host awci (wp 5)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9780
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Kindly help.
Regards
Sachin
Edited by: Sachin N on Apr 14, 2008 12:26 PMNo. If the environment would be wrong the system wouldn´t start up.
Core dumps are in 99 % of the cases program errors (in the SAP kernel or in an interface (libdbora*)), misaligend accesses of data etc.
If you encounter such an error have a look in the C-Stack. If you can´t see where the error is happening opening an OSS call. Most of those errors are fixed by installing the latest patches for the kernel and the database interface.
Markus -
New Note 790189.1 - Oracle Clusterware and Application Failover Management
Hi all,
please, note the newly created Metalink Note 790189.1 - Oracle Clusterware and Application Failover Management if you want to use Oracle Clusterware as a general purpose cluster solution. The note intends to clarify and to explain the current situation in regards to the supportability of applications managed by Oracle Clusterware.
In environments not including Oracle RAC, Oracle Clusterware still provides the level of high availability that is commonly known to be achievable for applications and databases managed in (failover) cluster environments. These environments can include Oracle Single Instance Databases, Oracle Application Servers, Oracle Enterprise Manager components, third party databases, or any other kind of application. (For more information on Oracle Clusterware 11g in general, please, refer to [Oracle Clusterware homepage|http://otn.oracle.com/clusterware].)
Metalink Note 790189.1 - Oracle Clusterware and Application Failover Management is tightly integrated with the information on application failover management available on the [Oracle Clusterware homepage|http://otn.oracle.com/clusterware] and discusses typical questions like
* Terminology
* Script supportability and preconfigured agents
* How to prove that action scripts work outside of Oracle Clusterware
* Supportability of the Oracle Database Single Instance example scripts
* How do I know whether a certain script is supported as a preconfigured agent?
Metalink Note 790189.1, however, does not change the level of support that has been introduced for these kind of configurations as of Oracle Database 10g Release 2: "Generally, Oracle does not support action scripts in the strict terms of supporting individual code fragments. Oracle fully supports the integration of individual action scripts proven to run outside of Oracle Clusterware into the Oracle Clusterware management stack. Supported operations therefore typically involve crs_* commands such as crs_profile, crs_register, crs_setperm, crs_getperm, crs_start, crs_stop, and crs_relocate invoked on custom resources. If actions scripts are used as part of a preconfigured agent, Oracle or the application provider who provides the agent will support the integration of this agent, while only the application provider will provide support for the individual action scripts."
Just for your information. Thanks,
Markusnot meant to be a question - rather an announcement.
-
Oracle Clusterware and Oracle Real Application Clusters Install Guide
I've downloaded the latest "Oracle Database - Oracle Clusterware and Oracle Real Application Clusters Install Guide - 10g Release 2 (10.2) for HP-UX PA-RISC" (part no. B14202-01) dated August 2005 from OTN. I'm getting the following error when opening the pdf file in Adobe Reader:
"Cannot extract the embedded font 'PEPPLC+Palatino-Italic'. Some characters may not display or print properly."
When I print the manual, I get blank pages throughout the document which, in my opinion, should contain text and don't. Specifically pages 1-11, 2-5, 2-19, 2-24, 2-33, 3-5, 3-19 to name a few. When I go to those pages within the pdf file in Adobe Reader, I get the error: "There was a problem reading this document (114)."
Can you verify this problem on your end. Also, how do I get a good copy of this document?Hi!
Apologies for the delay in responding to you. Please try the documentation library, part B19306-01 at URL: http://www.oracle.com/technology/documentation/database10gR2.html. Search for the part B14202-01 and click: pdf at top right. Part B14202-01 documentation pdf is currently displaying and printing on this end. The blank pages at the end of each main topic are inserted on purpose.
Another link to part B14202-01, on OTN is under the OEM, Oracle Enterprise Manager 10g Release 2 (10.2): http://www.oracle.com/pls/db102/portal.portal_db?selected=21
Thank you for your comments and feedbacks. Its much appreciated.
Main OTN, documentation URL: http://www.oracle.com/technology/documentation/index.html
Regards,
Chao -
Oracle Clusterware error while installing
Hi all,
I am installing Oracle Clusterware (10.2.0.1) on solaris SPARC 5.10...and while installing Clusterware i am getting the following error
Exception PRKC-1044 : Failed to check remote command execution setup for node1 using shells /usr/bin/ssh and /usr/bin/rsh
node1 Connection refused
Then i executed the from node1
runcluvfy.sh stage -pre crsinst -n node2
Verifying node connectivity
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed
users id's on both the nodes are same.
I have configured SSH on both the nodes and its working fine for Public IP and Private IP.i can able to SSH wothout asking for apssword.
I have created Links for ssh and scp files.
ln -s -f /usr/bin/ssh /usr/local/bin/ssh
ln -s -f /usr/bin/scp /usr/local/bin/scp
then also i am getting the same error...here i have posted my etc/hosts
###########MGMT Interface
0.0.139.18 Node1-mgmt-ce9
############FTEAM Interface(I am using this as Public IP)
0.0.43.132 Node1
0.0.43.133 Node1-fe1-ce4
0.0.43.134 Node1-fe2-ce0
#############VIP Interface(SSH is not working for this IP's)
0.0.43.135 Node1-ovip
###############HEART BEAT Interface(I am Using this as Private Ip's)
0.0.139.97 Node1-hbt
0.0.139.98 Node1-hbt1-ce6
0.0.139.99 Node1-hbt2-ce2
###############NAS Interface(SSH is not working for this IP's)
0.0.122.88 Node1-nas
0.0.123.194 Node1-nas1-ce1
0.0.123.195 Node1-nas2-ce5
######################for host Node2#####################################
#############MGMT Interface
0.0.139.19 Node2-mgmt-ce9
#############FTEAM Interface(I am using this as Public IP)
0.0.43.136 Node2
0.0.43.137 Node2-fe1-ce4
0.0.43.138 Node2-fe2-ce0
#############VIP Interface(SSH is not working for this IP's)
0.0.43.139 Node2-ovip
#############HEART BEAT Interface(I am Using this as Private Ip's)
0.0.139.100 Node2-hbt
0.0.139.101 Node2-hbt1-ce6
0.0.139.102 Node2-hbt2-ce2
#############NAS Interface(SSH is not working for this IP's)
0.0.122.89 Node2-nas
0.0.123.196 Node2-nas1-ce5
0.0.123.197 Node2-nas2-ce1
Expecting some workarounds for this
Cheers
-Arun
Edited by: Mr.Doll on Aug 24, 2008 8:33 AM
Edited by: Mr.Doll on Aug 24, 2008 8:49 AMthx for ur help the problem is resolved
i have removed the login banner from both the hosts and now its working fine...
and now i am facing the problem with the IP address its not taking the correct IP address..... -
Pros and Cons af Oracle 10g upgrade to 11g
Hi Basis Expert,
We have an requirement of SAP upgrade which includes BW 3.5, CRM and R/3 (4.7).
These components needs to be upgraded to the latest version
BW 3.5 to BI 7.0
R/3 (4.7) to ECC 6.0
and also CRM upgrade to the new version
The OS used is AIX and DB used is oracle 10g.
Can anybody share the pros and cons of oracle DB upgrade from 10g to 11g after SAP upgrade.
Regards,
Anil.Hi DatabaseSAP and others,
Thanks for your reply
I started with the Oracle 11g software installer. But it gave an error during 71%. Error is
Error in invoking target 'rat_on part_on dm_on olap_on sdo_on' of makefile '/oracle/DBW/112_64/rdbms/lib/ins_rdbms.mk'.
See '/oracle/DBW/oraInventory/logs/installActions2011-10-10_12-04-03PM.log' for details.
Abort Retry Continue
But when i was going thorough the installActions2011-10-10_12-04-03PM.log . I could find that there are 7 arguments which is failed.
Below are the argument details
1)INFO: Hard Limit: maximum user processes: This is a prerequisite condition to test whether the hard limit for "maximum user processes" is set to at least 16384.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
Verification Result for Node:p19849dev136
INFO: Expected Value:1024
INFO: Actual Value:9223372036854775807
INFO: -
INFO: *********************************************
INFO: Hard Limit: maximum user processes: This is a prerequisite condition to test whether the hard limit for "maximum user processes" is set to at least 16384.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:16384
INFO: Actual Value:3048
INFO: Error Message:PRVF-4354 : Proper hard limit for resource "maximum user processes" not found on node "p19849dev136" [Expected = "16384" ; Found = "3048"]
INFO: Cause: Hard limit for the resource does not meet the requirement on the specified node.
INFO: Action: Modify the resource limits to meet the requirement.
2)INFO: OS Kernel Parameter: ncargs: This is a prerequisite condition to test whether the OS kernel parameter "ncargs" is properly set.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:128
INFO: Actual Value:6
INFO: Error Message:PRVF-7543 : OS Kernel parameter "ncargs" does not have proper value on node "p19849dev136" [Expected = "128" ; Found = "6"].
INFO: Cause: Kernel parameter value does not meet the requirement.
INFO: Action: Modify the kernel parameter value to meet the requirement.
3)INFO: OS Kernel Parameter: tcp_ephemeral_low: This is a prerequisite condition to test whether the OS kernel parameter "tcp_ephemeral_low" is properly set.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:9000
INFO: Actual Value:32768
INFO: Error Message:PRVF-7543 : OS Kernel parameter "tcp_ephemeral_low" does not have proper value on node "p19849dev136" [Expected = "9000" ; Found = "32768"].
INFO: Cause: Kernel parameter value does not meet the requirement.
INFO: Action: Modify the kernel parameter value to meet the requirement.
4)INFO: OS Kernel Parameter: tcp_ephemeral_high: This is a prerequisite condition to test whether the OS kernel parameter "tcp_ephemeral_high" is properly set.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:65500
INFO: Actual Value:65535
INFO: Error Message:PRVF-7543 : OS Kernel parameter "tcp_ephemeral_high" does not have proper value on node "p19849dev136" [Expected = "65500" ; Found = "65535"].
INFO: Cause: Kernel parameter value does not meet the requirement.
INFO: Action: Modify the kernel parameter value to meet the requirement.
5)INFO: OS Kernel Parameter: udp_ephemeral_low: This is a prerequisite condition to test whether the OS kernel parameter "udp_ephemeral_low" is properly set.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:9000
INFO: Actual Value:32768
INFO: Error Message:PRVF-7543 : OS Kernel parameter "udp_ephemeral_low" does not have proper value on node "p19849dev136" [Expected = "9000" ; Found = "32768"].
INFO: Cause: Kernel parameter value does not meet the requirement.
INFO: Action: Modify the kernel parameter value to meet the requirement.
INFO: -
6)INFO: OS Kernel Parameter: udp_ephemeral_high: This is a prerequisite condition to test whether the OS kernel parameter "udp_ephemeral_high" is properly set.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:65500
INFO: Actual Value:65535
INFO: Error Message:PRVF-7543 : OS Kernel parameter "udp_ephemeral_high" does not have proper value on node "p19849dev136" [Expected = "65500" ; Found = "65535"].
INFO: Cause: Kernel parameter value does not meet the requirement.
INFO: Action: Modify the kernel parameter value to meet the requirement.
7)INFO: Users With Same UID: This test checks that multiple users do not exist with user id as "0".
INFO: Severity:CRITICAL
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
WARNING: Result values are not available for this verification task
INFO: Error Message:<CV_VAL>root,|super,|zero,|</CV_VAL><CV_ERES>0</CV_ERES>
INFO: Cause:Cause Of Problem Not Available
INFO: Action:User Action Not Available
INFO: *********************************************
Please let me know what is the 7th (last one) argument.
Regards,
Anil Shenoy
Maybe you are looking for
-
How to do it?? in SELECT BOX
here is the bean class sample code of getting the result set from database public void setMembers2() String query1="select e.idcode from employee e,wb_login w where e.idcode=w.idcode "; stmt1=conn1.createStatement(); rs1=stmt1.executeQuery(query1); S
-
How do you reset an admin password on a MacBook Pro running Mountain Lion?
I forgot the admin password on my mac and I tried resetting it using the command+r technique at startup however a lock symbol appeared which requires a password to access. Does anyone know how to reset the password without using a startup disc?
-
Half of my notes have just disappeared. Why could this have happened?
Half of my notes have disappeared in one day. Do notes expire after a certain amount of time to clear up space? What could have caused this?
-
SSRS schedule table LastRunTime column showing incorrect datetime
Hi, We have some code which analysis when the report was run last time (cached). We take this value from SSRSDB..Schedule(LastRunTime) column. Sql server and ssrs are configured on same server with CST time zone. The OS which host this also configure
-
Changing BI Job Priority in ECC
Hi All, I have a requirement to change the priority of BI jobs running in ECC (i.e. Infopackage job running in ECC.. have to make it B from default priority C ). I have gone through other threads but couldn't find any solution on that. Please let me