Oracle Configuration Assistant
Hello everybody,
i have an Oracle 9.2 installed on a couple of Win 2000. i'e installed the software downloaded from the otn site. the problem is Oracle Configuration Assistant doesn't start on both servers!
i need to remove a db instance completely (datafiles, control files and all the configuration files) how can i work it out?
thankx a lot,
matte
nope, one only Oracle home. i'm gonna use ORADIM and then remove db files manually, but i'm not sure this is enough to have a clean configuration at the end of the process.
Similar Messages
-
Oracle Clusterware Configuration Assistant fails
I am installing clusterware 11.1.0.6 and the runcluvfy commands all came back as passed, except for the VIP, which the documentation says to ignore. The whole install goes to 100%, then it runs the configuration assistants.
It falls over on the first of these: Oracle Configuration Assistant. If I retry it, the same addition is placed in the logfile, as below:
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\11.1.0\crs/install/crssetup.config.bat
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: vm-rac1 vm-rac1-priv vm-rac1
node 2: vm-rac2 vm-rac2-priv vm-rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\11.1.0\crs)
Step 3: configuring OCR repository
Oracle Cluster Registry already initialized
Step 4: configuring safe mode for CRS stack
Step 5: Starting up CRS stack on all nodes
vm-rac1 failed to startup service OracleCSService, err(1068)
vm-rac2 failed to startup service OracleCSService, err(1068)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\11.1.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\11.1.0\crs
Configuration directory is set to C:\oracle\11.1.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is null
INFO: Since the option is to overwrite the existing C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands.bak.1
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
Please help.Sorry:
alertvm-rac1.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:25.531
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.609
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.671
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.687
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:28.921
[client(3792)]CRS-1013:The OCR at \\.\ocrcfg was successfully formatted using version 2. Ignore earlier CRS-1006 messages if any.
2009-05-20 15:44:40.875
[client(3796)]CRS-1801:Cluster vm-rac_cluster configured with nodes vm-rac1 vm-rac2 .
client\clscfg.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 16:31:03.796: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.812: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.875: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.875: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.921: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.937: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
client\clsfmt.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:40.031: [ OCROSD][3872]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:40.031: [ OCROSD][3872]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:40.187: [ CLSFMT][3872]clsfmt: successfully initialized file \\.\votedsk1
client\ocrconfig_3788.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:25.453: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.484: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.484: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.531: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.562: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.562: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.562: [ OCRCONF][3792]ocrconfig starts...
2009-05-20 15:44:25.578: [ OCRCONF][3792]Upgrading OCR data
2009-05-20 15:44:25.609: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.609: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.609: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.609: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.609: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.609: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.609: [ OCRCONF][3792]Exporting OCR data to [OCRUPGRADEFILE]
2009-05-20 15:44:25.640: [ OCRAPI][3792]a_init:7!: Backend init unsuccessful : [33]
2009-05-20 15:44:25.640: [ OCRCONF][3792]There was no previous version of OCR. error:[PROC-33: Oracle Cluster Registry is not configured]
2009-05-20 15:44:25.656: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.671: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.671: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.671: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.671: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.671: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.687: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.687: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.687: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.703: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.703: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.875: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.921: [ OCRRAW][3792]propriowv: Vote information on disk 0 [\\.\ocrcfg] is adjusted from [0/0] to [2/2]
2009-05-20 15:44:28.921: [ OCRRAW][3792]iniconfig:No 92 configuration
2009-05-20 15:44:28.921: [ OCRAPI][3792]a_init:6a: Backend init successful
2009-05-20 15:44:30.593: [ OCRCONF][3792]Initialized DATABASE keys in OCR
2009-05-20 15:44:31.453: [ OCRCONF][3792]csetskgfrblock0: output from clsmft: [clsfmt: Failure trying to resize OCR file \\.\ocrcfg
from 10725732864 bytes to 10725736448 bytes
clsfmt: successfully initialized file \\.\ocrcfg
g
2009-05-20 15:44:31.531: [ OCRCONF][3792]Successfully set skgfr block 0
2009-05-20 15:44:31.531: [ OCRCONF][3792]Exiting [status=success]...
So, it seems to be all about the OCR not setup correctly, however, all I've done is follow the notes. This was a 'clean' VM install of win2003 Server, so nothing has been accidently tinkered with. -
Oracle DB Configuration Assistant hangs (9i install on Solaris 8)
Attempting to install 9i database (9.0.1) on Solaris 8 on Sparcstation 20. Goes OK until it gets to the Oracle Configuration Assistant. During the "Creating and Starting Oracle instance" phase, it gets to 50% and just stays there. I left it over the weekend (ie, about 60 hours) and still at 50%. The checkmark is still flashing in the Assistant UI, but obviously nothing is happening.
So.. my questions are:
1. I can abort the Assistant. How would I start it manually later?
2. Has anyone seen this and remedied it?
3. How can I determine what went wrong?
4. How can I tell what may have gone wrong in the install process that might cause Oracle to fail to install?
Thanks for your help!What is the server hardware configuration???
Maybe if you have less memory it's happen: 60 hours it's a very long time but you can try to install only the software and then that the installation is finished you can create the database with the database configuration assistant.
Try and say something.
Good Luck.
Daniele -
Failed to Install the "Oracle Web Services Manager Configuration Assistant"
The installation of "Oracle Web Services Manager Configuration Assistant" was failed when I installed the "Oracle SOA Suite 10.1.3.1.0" ,and the failure information about the installation in the log show as follows, I need your help,thanks a lot!
start-olite:
Starting OLite in background ...
Running:D:\product\10.1.3.1\OracleAS_1\integration\esb\sql\other\wfeventc.sql
Exception in thread "main" oracle.tip.esb.install.exception.InstallationDBException: Failed to execute sql file"D:\product\10.1.3.1\OracleAS_1\integration\esb\sql\other\wfeventc.sql"
at oracle.tip.esb.install.db.RunSQLScript.runScript(Unknown Source)
at oracle.tip.esb.install.db.RunSQLScript.runScriptListInternal(Unknown Source)
at oracle.tip.esb.install.db.RunSQLScript.runScriptList(Unknown Source)
at oracle.tip.esb.install.db.NonOracleDB.runScripts(Unknown Source)
at oracle.tip.esb.install.db.OLite.install(Unknown Source)
at oracle.tip.esb.install.db.InstallerMain.main(Unknown Source)
Caused by: java.sql.SQLException: [POL-3023] ????????
at oracle.lite.poljdbc.LiteThinJDBCConnection.thinSQLError(Unknown Source)
at oracle.lite.poljdbc.LiteThinJDBCConnection.thinDriverConnect(Unknown Source)
at oracle.lite.poljdbc.LiteThinJDBCConnection.connect(Unknown Source)
at oracle.lite.poljdbc.LiteThinJDBCFactory.createConnection(Unknown Source)
at oracle.lite.poljdbc.POLJDBCConnection.<init>(Unknown Source)
at oracle.lite.poljdbc.OracleConnection.<init>(Unknown Source)
at oracle.lite.poljdbc.POLJDBCDriver.connect(Unknown Source)
at oracle.tip.esb.install.db.DriverManagerDataSource.getConnection(Unknown Source)
... 6 more
Java Result: 1
Importing Default System ...
${env.PCHOME}
stop-olite:
Stopping background OLite process ...
CA::DEBUG:******:Finished OLite Install ...
Finished Olite configuration ...
BUILD SUCCESSFUL
Total time: 12 seconds
Exit: 0
TASK: oracle.tip.esb.install.tasks.ConfigureOC4J
Configuring OC4J ...
id value is 2
id value is IASPT
process-type value is 1
id value is 3
id value is IASPT
id value is 3
id value is ASG
process-type value is 1
id value is 2
id value is ASG
id value is 1
id value is default_group
process-type value is 1
id value is 3
id value is home
process-type value is 1
process-type value is 2
process-type value is 1
final map size value is 2
id value is -Xrs -server -XX:MaxPermSize=128M -ms512M -mx1024M -XX:AppendRatio=3 -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false
Jun 22, 2010 2:39:09 PM oracle.tip.esb.install.tasks.ConfigureOC4J getOpmnRequestPort
INFO: Port value is 6003
D:\product\10.1.3.1\OracleAS_1\jdk\bin\java -Dant.home=D:\product\10.1.3.1\OracleAS_1\ant -classpath D:\product\10.1.3.1\OracleAS_1\ant\lib\ant.jar;D:\product\10.1.3.1\OracleAS_1\ant\lib\ant-launcher.jar;D:\product\10.1.3.1\OracleAS_1\integration\esb\lib\ant-contrib-1.0b1.jar org.apache.tools.ant.Main -Dinstall.type=SoaBasic -Desb.home=D:\product\10.1.3.1\OracleAS_1\integration\esb -Doc4j.home.dir=D:\product\10.1.3.1\OracleAS_1 -Djava.home=D:\product\10.1.3.1\OracleAS_1\jdk -Doracle.home=D:\product\10.1.3.1\OracleAS_1 -Dhost.name=dpxc67-01 -Ddb.vendor=olite -Dimport.export.db_url=jdbc:polite4@localhost:1531:oraesb -Desb.appserver=ias_10.1.3 -Doc4j.design_time_host=dpxc67-01 -Doc4j.design_time_port=8888 -Dprimary.container=home -Dinstall.mode=OracleInstallerias_10.1.3_SoaBasic -Dsso=true -Dinstall.component=install-developer -Dias.name=soademo.dpxc67-01 -Denv.OC4J_STANDALONE_HOME=D:\product\10.1.3.1\OracleAS_1 -Dias_admin.password=*password cannot be displayed* -Denv.JAVA_HOME=D:\product\10.1.3.1\OracleAS_1\jdk -Denv.SERVER_ADMIN_PASSWORD=*password cannot be displayed* -Dopmn.requestport=6003 -Ddb.vendor=olite -Ddb.connect.string=jdbc:polite4@localhost:1531:oraesb -Ddb.username=system -Dias.virtual_host=dpxc67-01 -Denv.DB_USER=system -Denv.DB_URL=jdbc:polite4@localhost:1531:oraesb -Desb.oc4j.container=home -Denv.DB_PASSWORD=*password cannot be displayed* -Ddb.password=*password cannot be displayed* -e -buildfile esbinstall.xml deploy-applications
Buildfile: esbinstall.xml
Trying to override old definition of datatype echoproperties
common_update_server.xml:
Adding shared library apache.junit ...
Adding shared library oracle.db.lite ...
Adding shared library apache.commons 10.1.3 ...
Adding shared library apache.jdom ...
Adding shared library apache.slide ...
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://dpxc67-01:6003/home -script D:\product\10.1.3.1\OracleAS_1\integration\esb\install\ant-tasks/esb_admin_client_script_sl.txt
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
update_server.xml:
Adding shared library oracle.esb ...
deployer.url: deployer:oc4j:opmn://dpxc67-01:6003/home
publishSharedLibrary command was successful
deploy-applications:
Deploying ESB design time ...
Binding ESB design time ...
Deploying ESB run time ...
Binding ESB runtime ...
Deploying orainfra.ear ...
Binding orainfra ...
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://dpxc67-01:6003/home -script D:\product\10.1.3.1\OracleAS_1\integration\esb\install\ant-tasks/esb_deployapps.txt
10/06/22 14:39:20 Notification ==>Application Deployer for esb-dt STARTS.
10/06/22 14:39:20 Notification ==>Copy the archive to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt.ear
10/06/22 14:39:20 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt.ear begins...
10/06/22 14:39:20 Notification ==>Unpacking esb-dt.ear
10/06/22 14:39:21 Notification ==>Done unpacking esb-dt.ear
10/06/22 14:39:21 Notification ==>Unpacking esb_console.war
10/06/22 14:39:22 Notification ==>Done unpacking esb_console.war
10/06/22 14:39:22 Notification ==>Unpacking esb-jca-dt.rar
10/06/22 14:39:22 Notification ==>Done unpacking esb-jca-dt.rar
10/06/22 14:39:22 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt.ear ends...
10/06/22 14:39:22 Notification ==>Starting application : esb-dt
10/06/22 14:39:22 Notification ==>Initializing ClassLoader(s)
10/06/22 14:39:22 Notification ==>Initializing EJB container
10/06/22 14:39:22 Notification ==>Loading connector(s)
10/06/22 14:39:22 Notification ==>Starting up resource adapters
10/06/22 14:39:23 Notification ==>Warning. Unable to set up connection factory to location esb-dt for a resource adapter in {1}
10/06/22 14:39:23 Notification ==>Initializing EJB sessions
10/06/22 14:39:23 Notification ==>Committing ClassLoader(s)
10/06/22 14:39:23 Notification ==>Initialize esb_console begins...
10/06/22 14:39:23 Notification ==>Initialize esb_console ends...
10/06/22 14:39:23 Notification ==>Started application : esb-dt
10/06/22 14:39:23 Notification ==>Application Deployer for esb-dt COMPLETES. Operation time: 2875 msecs
10/06/22 14:39:23 Notification ==>Application Deployer for esb-rt STARTS.
10/06/22 14:39:23 Notification ==>Copy the archive to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-rt.ear
10/06/22 14:39:23 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-rt.ear begins...
10/06/22 14:39:23 Notification ==>Unpacking esb-rt.ear
10/06/22 14:39:23 Notification ==>Done unpacking esb-rt.ear
10/06/22 14:39:23 Notification ==>Unpacking provider-war.war
10/06/22 14:39:23 Notification ==>Done unpacking provider-war.war
10/06/22 14:39:23 Notification ==>Unpacking esb-jca-rt.rar
10/06/22 14:39:23 Notification ==>Done unpacking esb-jca-rt.rar
10/06/22 14:39:23 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-rt.ear ends...
10/06/22 14:39:23 Notification ==>Starting application : esb-rt
10/06/22 14:39:23 Notification ==>Initializing ClassLoader(s)
10/06/22 14:39:23 Notification ==>Initializing EJB container
10/06/22 14:39:23 Notification ==>Loading connector(s)
10/06/22 14:39:23 Notification ==>Starting up resource adapters
10/06/22 14:39:23 Notification ==>Warning. Unable to set up connection factory to location esb-rt for a resource adapter in {1}
10/06/22 14:39:23 Notification ==>Initializing EJB sessions
10/06/22 14:39:23 Notification ==>Committing ClassLoader(s)
10/06/22 14:39:23 Notification ==>Initialize provider-war begins...
10/06/22 14:39:23 Notification ==>Initialize provider-war ends...
10/06/22 14:39:23 Notification ==>Started application : esb-rt
10/06/22 14:39:23 Notification ==>Application Deployer for esb-rt COMPLETES. Operation time: 203 msecs
10/06/22 14:39:24 Notification ==>Application Deployer for orainfra STARTS.
10/06/22 14:39:24 Notification ==>Copy the archive to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\orainfra.ear
10/06/22 14:39:24 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\orainfra.ear begins...
10/06/22 14:39:24 Notification ==>Unpacking orainfra.ear
10/06/22 14:39:24 Notification ==>Done unpacking orainfra.ear
10/06/22 14:39:24 Notification ==>Unpacking orainfra.war
10/06/22 14:39:24 Notification ==>Done unpacking orainfra.war
10/06/22 14:39:24 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\orainfra.ear ends...
10/06/22 14:39:24 Notification ==>Starting application : orainfra
10/06/22 14:39:24 Notification ==>Initializing ClassLoader(s)
10/06/22 14:39:24 Notification ==>Initializing EJB container
10/06/22 14:39:24 Notification ==>Loading connector(s)
10/06/22 14:39:24 Notification ==>Starting up resource adapters
10/06/22 14:39:24 Notification ==>Initializing EJB sessions
10/06/22 14:39:24 Notification ==>Committing ClassLoader(s)
10/06/22 14:39:24 Notification ==>Initialize orainfra begins...
10/06/22 14:39:24 Notification ==>Initialize orainfra ends...
10/06/22 14:39:24 Notification ==>Started application : orainfra
10/06/22 14:39:24 Notification ==>Application Deployer for orainfra COMPLETES. Operation time: 219 msecs
dehydrationStore:
Configuring data sources for olite dehydration store ...
${env.PCHOME}
install-developer:
design time host dpxc67-01
design time port 8888
primary container home
the host is dpxc67-01and the port is 8888
Exception in thread "main" oracle.tip.esb.install.exception.InstallationDBException: Connection Refused ""
at oracle.tip.esb.install.db.NonOracleDB.runConnectionTest(Unknown Source)
at oracle.tip.esb.install.db.NonOracleDB.load(Unknown Source)
at oracle.tip.esb.install.ESBInstaller.setupDB(Unknown Source)
at oracle.tip.esb.install.ESBInstaller.handleDesignTimeSpecificActions(Unknown Source)
at oracle.tip.esb.install.ESBInstaller.main(Unknown Source)
Caused by: java.sql.SQLException: [POL-3023] ????????
at oracle.lite.poljdbc.LiteThinJDBCConnection.thinSQLError(Unknown Source)
at oracle.lite.poljdbc.LiteThinJDBCConnection.thinDriverConnect(Unknown Source)
at oracle.lite.poljdbc.LiteThinJDBCConnection.connect(Unknown Source)
at oracle.lite.poljdbc.LiteThinJDBCFactory.createConnection(Unknown Source)
at oracle.lite.poljdbc.POLJDBCConnection.<init>(Unknown Source)
at oracle.lite.poljdbc.OracleConnection.<init>(Unknown Source)
at oracle.lite.poljdbc.POLJDBCDriver.connect(Unknown Source)
at oracle.tip.esb.install.db.DriverManagerDataSource.getConnection(Unknown Source)
... 5 more
Java Result: 1
Copying 1 file to D:\product\10.1.3.1\OracleAS_1\j2ee\home\lib\ext
set_app_sso_option:
Using sso=true. Redeploying esb-dt with sso
Copying 1 file to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt\META-INF
Copying 1 file to D:\product\10.1.3.1\OracleAS_1\j2ee\home\application-deployments\esb-dtIt could be due to system language setting -
install SOA Suite failed
Regards,
Anuj -
Can not start Oracle 8.1.7 Network configuration assistant
Hi!
I have Oracle 8.1.7 on a PIII 1Ghz 256 Mb running win2k sp2 , I try to run Network configuration assistant and nothing happens , I can run dba studio and sql/plus or Database configuration assistant without problems but no way with any tool under network.
Any idea?
Thanks!!Got past this spot... Thanks to the beefier shared memory/semaphore settings in this website (from another response in this forum)
http://www.dbspecialists.com/4dbas/presos/oracle817solaris.html -
Problem using template in database configuration assistant Oracle 10g
Hi,
I created a database using the database configuration assistant for Oracle 10g on a Windows Server 2003 box. The database I created worked perfectly, and I had saved it as a template so I could save some time when creating similar databases (which I have to do on occasion)
When I try to use the template though, I get an error (at about 4% through the database creation) saying:
ORA-01501: CREATE DATABASE failed
ORA-09314: sltln: error translating logical name
I'm creating this new database on the same server as the one I created my previous database on and NOTHING has changed on it, I did this just minutes apart and can duplicate it at will (just try and use a template)
Heres the template file contents (KM1.dbt)
<DatabaseTemplate name="KM1" description="" version="10.1.0.2.0">
<CommonAttributes>
<option name="ISEARCH" value="false"/>
<option name="OMS" value="false"/>
<option name="JSERVER" value="false"/>
<option name="SPATIAL" value="false"/>
<option name="ODM" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="IMEDIA" value="false"/>
<option name="XDB_PROTOCOLS" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="ORACLE_TEXT" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="SAMPLE_SCHEMA" value="false"/>
<option name="CWMLITE" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="EM_REPOSITORY" value="true">
<tablespace id="SYSAUX"/>
</option>
</CommonAttributes>
<Variables/>
<CustomScripts Execute="false"/>
<InitParamAttributes>
<InitParams>
<initParam name="O7_DICTIONARY_ACCESSIBILITY" value="TRUE"/>
<initParam name="background_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\bdump"/>
<initParam name="compatible" value="10.1.0.2.0"/>
<initParam name="core_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\cdump"/>
<initParam name="db_block_size" value="8" unit="KB"/>
<initParam name="db_cache_size" value="24" unit="MB"/>
<initParam name="db_create_file_dest" value="E:\oradata"/>
<initParam name="db_create_online_log_dest_1" value="C:\Oradata"/>
<initParam name="db_create_online_log_dest_2" value="D:\Oradata"/>
<initParam name="db_create_online_log_dest_3" value="E:\Oradata"/>
<initParam name="db_domain" value="JACOBSONCO.COM"/>
<initParam name="db_file_multiblock_read_count" value="16"/>
<initParam name="db_name" value="UDC7"/>
<initParam name="db_recovery_file_dest" value="E:\UDC7\flash_recovery_area"/>
<initParam name="db_recovery_file_dest_size" value="2048" unit="MB"/>
<initParam name="java_pool_size" value="0" unit="MB"/>
<initParam name="job_queue_processes" value="10"/>
<initParam name="large_pool_size" value="8" unit="MB"/>
<initParam name="open_cursors" value="1000"/>
<initParam name="pga_aggregate_target" value="24" unit="MB"/>
<initParam name="processes" value="150"/>
<initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
<initParam name="shared_pool_size" value="80" unit="MB"/>
<initParam name="sort_area_size" value="65536"/>
<initParam name="undo_management" value="AUTO"/>
<initParam name="undo_tablespace" value="UNDOTBS1"/>
<initParam name="user_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\udump"/>
</InitParams>
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>40</percentageMemTOSGA>
<customSGA>true</customSGA>
<characterSet>WE8MSWIN1252</characterSet>
<nationalCharacterSet>AL16UTF16</nationalCharacterSet>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\pfile\init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="true">{ORACLE_HOME}\database\spfile{SID}.ora</SPfile>
</InitParamAttributes>
<StorageAttributes>
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="<OMF_CONTROL_0>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_1>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_2>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</ControlfileAttributes>
<DatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<tablespace>SNIKEB</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>false</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">-2</increment>
<maxSize unit="KB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<tablespace>SYSAUX</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">120</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<tablespace>SYSTEM</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<tablespace>TEMP</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">20</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">640</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<tablespace>UNDOTBS1</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">200</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">5120</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<tablespace>USER_DATA</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">5</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">1280</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<TablespaceAttributes id="SNIKEB">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">-1</initSize>
<increment unit="KB">-1</increment>
<incrementPercent>-1</incrementPercent>
<minExtends>-1</minExtends>
<maxExtends>-2</maxExtends>
<minExtendsSize unit="KB">-1</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<id>1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSAUX">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSTEM">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>3</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>-1</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="TEMP">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>true</temporary>
<defaultTemp>true</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>0</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="UNDOTBS1">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>true</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">512</initSize>
<increment unit="KB">512</increment>
<incrementPercent>50</incrementPercent>
<minExtends>8</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">512</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="USER_DATA">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">128</initSize>
<increment unit="KB">128</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">128</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<RedoLogGroupAttributes id="1">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_1_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="2">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_2_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="3">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_3_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
</StorageAttributes>
</DatabaseTemplate>
can anyone explain why I keep getting this error?
ThanksError: ORA-9314
Text: sltln: error translating logical name
Cause: Internal buffer may have overflowed
Action: See OSD error accompanying this message
Check alertlog and trace files.
Message was edited by:
FeNiCrC_Neil -
INS-20802 Oracle net configuration assistant failed on windows server 2003 R2
Hi all,
I have windows server 2003 r2 installed on VM and tried installing oracle database 11g r2.
But got Oracle net configuration assistant failed. Below is the log
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = C:\oracle\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 0
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@c0d228
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1257f0e
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Created config job for Oracle Net Configuration Assistant
INFO: Created config job for Oracle Database Configuration Assistant
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1ae9cec
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeToolsInAggregate action performed
INFO: Exiting ConfigClient.executeToolsInAggregate method
INFO: Calling event ConfigToolsExecuted
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@140de18
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1b52041
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.1
INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@b970f5
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.1
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@969e08
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@6155e3
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.2
INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1e976fd
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.2
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed ConfigurationHi Srini,
The issue is resolved. Thanks for your response.
The issue is, windows 2003 server is 32 bit and I am trying to install 64 bit 11g database. I tried installing 32 bit 11g database. Before that I have cleared the traces of virtual box in my host system and reinstalled it and tried. It worked out.
Thanks
Sunil -
Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4
I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec") -
INS-20802 Oracle Private Interconnect Configuration Assistant failed
Thought I would post what information I've gathered, after facing this error during install of RAC Grid Infrastructure 11.2.0.1 on Red Hat Enterprise Linux Server release 5.5 64-bit, as Oracle Support is once again unable to help. Maybe this will save someone else some time and the aggravation of dealing with lousy Oracle Support.
The error occurs after root.sh has successfully completed on all nodes. Oracle Net Configuration Assistant runs successfully, then Oracle Private Interconnect Configuration Assistant launches and subsequently fails with the following.
[INS-20802] Oracle Private Interconnect Configuration Assistant failed.
/u01/app/oraInventory/logs/installActions2010-12-13_01-26-10PM.log
INFO: Starting 'Oracle Private Interconnect Configuration Assistant'
INFO: Starting 'Oracle Private Interconnect Configuration Assistant'
INFO: PRIF-26: Error in update the profiles in the cluster
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Private Interconnect Configuration Assistant
INFO: Oracle Private Interconnect Configuration Assistant failed.
INFO: Oracle Private Interconnect Configuration Assistant failed.
I was able to find another error that coincides with the PRIF-26 error: "CRS-2324:Error(s) occurred while trying to push GPnP profile. State may be inconsistent."
I was also able to duplicate the PRIF-26 error by trying to add a non-existent network interface via oifcfg:
./oifcfg setif -global jjj1/192.167.1.0:cluster_interconnect
PRIF-26: Error in update the profiles in the cluster
My best guess is the Oracle Private Interconnect Configuration Assistant makes a call to oifcfg. When oifcfg makes an update or adds a public/private interface, some XML files are also updated or maybe cross-referenced. These files are located here: <grid_home>/gpnp/<host>/profiles/peer
Any updates/changes/addtions to the private or public interfaces include changes for the Grid Plug-n-Play component, which uses the XML files. If the interface name is not contained in the XML files, my best guess is that triggers the "CRS-2324:Error(s) occurred while trying to push GPnP profile. State may be inconsistent.
I verified everything was configured correctly; the cluster verification utility reported everything was ok. I also ran the cluster verifcation utility against the GP-nP:
./cluvfy comp gpnp -verbose
I also reviewed the public and private interfaces via oifcfg and they are correct:
[oracle@ryoradb1 bin]$ ./oifcfg getif -global
eth0 10.10.2.0 global public
eth1 192.167.1.0 global cluster_interconnect
[oracle@ryoradb1 bin]$ ./oifcfg iflist -p
eth0 10.10.2.0 PRIVATE
eth1 192.167.1.0 UNKNOWN
My conclusion is the environment is configured correctly, in spite of the error generated by the Oracle Private Configuration Assistant.I understand that you have installed 11.2.0.1 not 11.2.0.2 because multicating must be enabled if you have installed 11.2.0.2 and you may face these sort of problems because cluster nodes would not be able to communicate with each other.
Please check ocssd.log especially on the first node because this file will give more inforamtion as to why first node is not able to push GPnP file. As you have executed cluvfy to confirm the GPnP but to confirm whether GPnP profile is accurate to just narrow down the problem, I would suggest you to try to start cluster in exclusive mode so that you can sure that GPnP profile is good.
Shutdown CRS on all nodes, if there is any hung processes then kill them before executing the fllowing command to start cluster in exclusive mode.
$GRID_HOME/bin/crsctl start crs -excl
If you are able to start cluster in exclusive then it is sure that GPnP is correct and then next step would be to verify the private network.
See how you goes.
FYI, I was recently analyzing the same sort of problems where cluster was not able to access GPnP profile and finally I found issues on my private network. Customer had enabled IGMP snooping, which was avoiding multicast communication over the private network but it was 11.2.0.2, which is not the case here.
Harish Kumar
http://www.oraxperts.com -
Oracle 10g Installation: JVM Crashes in Net Configuration Assistant
Hi,
I'm trying to install Oracle 10g (10.2.0.1) in Windows 2003 server, Installation goes fine, JVM crashes at the time of configuring, "Network Conf Assistant", Can any one help me out here.... Have given the JVM dump for your reference...
Thanks in Advance....
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x626DB080
Function=Java_oracle_net_common_jlsnrctl_executeCommand+0x9150
Library=E:\oracle\product\10.2.0\db_1\BIN\oranjni10.dll
Current Java thread:
at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
at oracle.net.ca.ConfigureProfile.typicalConfigure(Unknown Source)
at oracle.net.ca.NetCA.typicalConfigureServer(Unknown Source)
at oracle.net.ca.NetCA.<init>(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x00400000 - 0x0040B000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\java.exe
0x7C800000 - 0x7C8C0000 E:\WINDOWS\system32\ntdll.dll
0x77E40000 - 0x77F42000 E:\WINDOWS\system32\kernel32.dll
0x77F50000 - 0x77FEC000 E:\WINDOWS\system32\ADVAPI32.dll
0x77C50000 - 0x77CEF000 E:\WINDOWS\system32\RPCRT4.dll
0x77BA0000 - 0x77BFA000 E:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\client\jvm.dll
0x77380000 - 0x77412000 E:\WINDOWS\system32\USER32.dll
0x77C00000 - 0x77C48000 E:\WINDOWS\system32\GDI32.dll
0x76AA0000 - 0x76ACD000 E:\WINDOWS\system32\WINMM.dll
0x71BC0000 - 0x71BC8000 E:\WINDOWS\system32\rdpsnd.dll
0x771F0000 - 0x77201000 E:\WINDOWS\system32\WINSTA.dll
0x71C40000 - 0x71C98000 E:\WINDOWS\system32\NETAPI32.dll
0x76B70000 - 0x76B7B000 E:\WINDOWS\system32\PSAPI.DLL
0x10000000 - 0x10007000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\hpi.dll
0x76F50000 - 0x76F63000 E:\WINDOWS\system32\Secur32.dll
0x00380000 - 0x0038E000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\verify.dll
0x00390000 - 0x003A9000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\java.dll
0x003C0000 - 0x003CE000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\zip.dll
0x03270000 - 0x03382000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\awt.dll
0x73070000 - 0x73097000 E:\WINDOWS\system32\WINSPOOL.DRV
0x76290000 - 0x762AD000 E:\WINDOWS\system32\IMM32.dll
0x77670000 - 0x777A4000 E:\WINDOWS\system32\ole32.dll
0x03490000 - 0x034E1000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\fontmanager.dll
0x626D0000 - 0x626E5000 E:\oracle\product\10.2.0\db_1\BIN\oranjni10.dll
0x62740000 - 0x6277D000 E:\oracle\product\10.2.0\db_1\bin\oranl10.dll
0x60960000 - 0x60A6D000 E:\oracle\product\10.2.0\db_1\bin\oran10.dll
0x62670000 - 0x6268B000 E:\oracle\product\10.2.0\db_1\bin\orancrypt10.dll
0x60870000 - 0x60953000 E:\oracle\product\10.2.0\db_1\bin\oracore10.dll
0x60A80000 - 0x60B44000 E:\oracle\product\10.2.0\db_1\bin\oranls10.dll
0x63690000 - 0x636A8000 E:\oracle\product\10.2.0\db_1\bin\oraunls10.dll
0x7C340000 - 0x7C396000 E:\WINDOWS\system32\MSVCR71.dll
0x60EB0000 - 0x60EB7000 E:\oracle\product\10.2.0\db_1\bin\orauts.dll
0x71C00000 - 0x71C17000 E:\WINDOWS\system32\WS2_32.dll
0x71BF0000 - 0x71BF8000 E:\WINDOWS\system32\WS2HELP.dll
0x62920000 - 0x6296C000 E:\oracle\product\10.2.0\db_1\bin\oranro10.dll
0x62530000 - 0x62583000 E:\oracle\product\10.2.0\db_1\bin\oraldapclnt10.dll
0x627F0000 - 0x628F9000 E:\oracle\product\10.2.0\db_1\bin\orannzsbb10.dll
0x60300000 - 0x60857000 E:\oracle\product\10.2.0\db_1\bin\orageneric10.dll
0x63430000 - 0x63457000 E:\oracle\product\10.2.0\db_1\bin\orasnls10.dll
0x60FA0000 - 0x61092000 E:\oracle\product\10.2.0\db_1\bin\oracommon10.dll
0x61C20000 - 0x61E72000 E:\oracle\product\10.2.0\db_1\bin\oraclient10.dll
0x636B0000 - 0x636B6000 E:\oracle\product\10.2.0\db_1\bin\oravsn10.dll
0x60B50000 - 0x60EA8000 E:\oracle\product\10.2.0\db_1\bin\orapls10.dll
0x034F0000 - 0x034F9000 E:\oracle\product\10.2.0\db_1\bin\oraslax10.dll
0x63080000 - 0x63284000 E:\oracle\product\10.2.0\db_1\bin\oraplp10.dll
0x03500000 - 0x0359A000 E:\oracle\product\10.2.0\db_1\bin\orasql10.dll
0x035A0000 - 0x03700000 E:\oracle\product\10.2.0\db_1\bin\oraxml10.dll
0x60020000 - 0x60030000 E:\WINDOWS\system32\MSVCIRT.dll
0x62980000 - 0x62990000 E:\oracle\product\10.2.0\db_1\bin\orantcp10.dll
0x61ED0000 - 0x61F5B000 E:\oracle\product\10.2.0\db_1\bin\orahasgen10.dll
0x62AB0000 - 0x62B1A000 E:\oracle\product\10.2.0\db_1\bin\oraocr10.dll
0x62B20000 - 0x62B60000 E:\oracle\product\10.2.0\db_1\bin\oraocrb10.dll
0x71BB0000 - 0x71BB9000 E:\WINDOWS\system32\WSOCK32.dll
0x62790000 - 0x627A7000 E:\oracle\product\10.2.0\db_1\bin\oranldap10.dll
0x77D00000 - 0x77D8C000 E:\WINDOWS\system32\OLEAUT32.dll
0x626B0000 - 0x626B7000 E:\oracle\product\10.2.0\db_1\bin\oranhost10.dll
0x62660000 - 0x62666000 E:\oracle\product\10.2.0\db_1\bin\orancds10.dll
0x629C0000 - 0x629C8000 E:\oracle\product\10.2.0\db_1\bin\orantns10.dll
0x03860000 - 0x03868000 E:\oracle\product\10.2.0\db_1\BIN\orawsec10.dll
0x635D0000 - 0x635E9000 E:\oracle\product\10.2.0\db_1\BIN\orasrvm10.dll
0x77B90000 - 0x77B98000 E:\WINDOWS\system32\VERSION.dll
0x62590000 - 0x625DE000 E:\oracle\product\10.2.0\db_1\BIN\oraldapjclnt10.dll
0x76C10000 - 0x76C39000 E:\WINDOWS\system32\imagehlp.dll
0x6D580000 - 0x6D628000 E:\WINDOWS\system32\dbghelp.dll
Heap at VM Abort:
Heap
def new generation total 576K, used 567K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 99% used [0x10010000, 0x1008fa20, 0x10090000)
from space 64K, 88% used [0x100a0000, 0x100ae298, 0x100b0000)
to space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
tenured generation total 1408K, used 628K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 44% used [0x104f0000, 0x1058d398, 0x1058d400, 0x10650000)
compacting perm gen total 5120K, used 4967K [0x14010000, 0x14510000, 0x18010000)
the space 5120K, 97% used [0x14010000, 0x144e9eb0, 0x144ea000, 0x14510000)
Local Time = Sun Oct 16 09:26:38 2005
Elapsed Time = 4
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid2820.log.
# Please refer to the file for further information.
Configuration assistant "Oracle Net Configuration Assistant" failed
The "E:\oracle\product\10.2.0\db_1\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-------------------No Srini,
I opted to create a starter database as part of the installation.
The error occurs "during installation" while trying to do the database configurations.
(I did try once without installing and configuring the Loopback adapter (With and without plugging into the network).
Later I read some of the problems with DHCP and installed/configured the Loopback adapter.
Then tried Installing Oracle 11gR2 (With and without plugging into the network)
But end up getting stuck at the same Net Configuration Assistant failure).
Any advise ?
By the way, thanks for the support.
San. -
Security problem in oracle 9i Database Configuration Assistant
Inside the tool Oracle 9i Database Configuration Assistant there is an option by which you can make a "copy" of your Database. This "copy" is called a template and you don4t need any password or aunthentication to do it, you just need the tool to be installed in your server. Once you have a template, you can bring it anywhere and recreate the original database (including data). Again, you don't need any password or aunthentication to do it, further more, in the last step of this process you can change the password of any user (inluding SYS, SYSTEM or another DBA user). The thing about this is that anyone with access to the computer where the database is can make a template of it, take this template to another computer and recreate my database having FULL access to it (structure, data, code ...). And everything without needing any password!!!. I really thing that it is a big problem. Is there any way of preventing this operation?. How can I safely protect my database?. I thought about unistalling the product, but someone can re-install it and everything would be the same. Can someone give me an answer?
Thanks for everything.
Pablo CuencaYou must protect your database from casual browsing at the OS level. This is not a security hole, per se, since this is a known issue with any and all software. Database Configuration Assistant is not needed for this since one may copy the database without it.
-
Database Configuration Assistant fails during instalation of Oracle EE 8.1.7
My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andresome good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny -
Database Configuration Assistant fails during installation Oracle EE 8.1.7
My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (for Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andresome good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny -
Oracle 11g Database Configuration Assistant Hangs At 45% During 1st Install
Platform: Windows Vista 64 Bit Version
Downloaded: Oracle 11g Database 64 Bit
Service Pack 1
Greetings to all my Oracle Seniors. I have been attempting in vain to install the Oracle 11g database software package fully. I was able to complete the initial installation and made it to the second recommended action which was the Database Configuration Assistant operation. After 3 attempts, the progress bar stalled at 45%. I tried to look at the log file cfgtoologs (cloneDBCreation, and CloneRmanRestore), but it said that I didn't have permission. My pre-check cleared OK on everything. So, please direct me as to how to correct this issue.
Thanks
Preston
System IntegratorWell, that is not much of an option right now. I discovered that I have to reinstall the XP Pro OS after attempting the 11g installation 4 times and the install always stalled at 69% during the initial installation. I did have Windows Service Pack 3 installed on the system. I down graded and added 1 G of additional memory and checked the pre-check with no problem. But, the install continued to stall at 69%. So, and, yet, here we are.
Now in regards to the metalink notes, I am new to the forum, so I don't know my way around quite yet. Isn't the metalink the paid suppport option? If so, I don't have that access. -
Oracle 9i database configuration assistant cannot be launched
After install 10g ODP.net and Oracle Developer Tools for Visual Studio .NET with ODAC components, the Oracle 9i database configuration assistant program cannot be launched.
Never had this problem before, but this is usually becos of jre version incompatibility. Changing CLASSPATH env might help.
Maybe you are looking for
-
How to call a variable in another class????
if i have two classes in a package. From one class, how do i get the value of one of the variable in the other class. For example; Class A have a variable call totalNum which have a value initialise. Class B wan to get the value variable totalNum in
-
Mail does not retreive messages after upgrading to Mountain Lion
I just upgraded my work iMac (2009) to Mountain Lion last night and now it will not retreive any messages from my work email account (POP). It was working fine yesterday (and for the past 3+ years) while I was still on Lion, but despite searching fo
-
Installing 186.81 Nvidia Drivers for Windows 7 64-bit on Lenovo Laptops 2700M/3700M NVS140M
UPDATE: I removed old 186.03 info and replaced with new driver info. Also I changed the device ID for the 3700m becasue it was not correct. I finally got a w700ds to test it on. Removed pre-edited INF files becsue they are no longer valid. Here are s
-
Database filter not working in Powershell command
I'm trying to run a powershell query to find what users have a retention policy applied to them. However, I'm also trying to filter out a database that contains service accounts, which should be excluded. The issue I'm running into is that the databa
-
How do I transfer adobe 8 pro to a new computer. I do not know my serial number
How do I transfer the software to a new computer. I do not have disk or serial number