Oracle configuration in Redwood environment

Hi,
We have Redwood 6.02 on Oracle database. We have configured Oracle server as SHARED/MTS server .
We are planning to configure it as dedicated server. Please advise whether it is advisable to do it or Redwood recommends a SHRAED/MTS server configuration??. Thanks.
Thanks.
Raj.

Hi,
The connections for the Process Server should be dedicated (should be enforced in tnsnames.ora), so there should be no problem moving all connections to dedicated.
Regards,
Anton.

Similar Messages

Oracle Configuration Manager - No database target

Hi,
i've installed the latest version of the oracle configuration manager (10.3.3.1.0) in my database home and ran the installCCRSQL.sh script successfully against the database instance.
Unfortunately i don't see any database instance target in the metalink system section nor if i run the "emCCR disable_target" command. A "Host", "Oracle Home" and a "Oracle Configuration Manager" target are available.
For the installation, i set the following environment variables:
ORACLE_CONFIG_HOME=/oracle/product/11.1.0/db_1
OLDPWD=/oracle/product/11.1.0/db_1/ccr/bin
ORACLE_SID=MIST
ORACLE_BASE=/oracle
TNS_ADMIN=/oracle/admin/network
HOME=/home/oracle
ORACLE_HOME=/oracle/product/11.1.0/db_1
I'm running oracle enterprise linux 5.4 and oracle database 11.1.0.7.
Can anyone tell me why I don't have a database instance target?
Regards,
P. Liniger

anyone?

Shutdown Oracle Database in MSCS Environment

Dear All,
We are facing problem regarding shutdown the oracle database in Cluster Environment. We have installed SAP HA on windows 2003 server and backend database is Oracle.
In order to configure the dataguard we have to create the control file from Primary Database for this purpose we have to shutdown and then startup the database in mount state.
But whenever i shutdown the database from SQL prompt by "shutdown immediate" command and see the status of
database it always remains in open state.
I have tried the following options as well but no success:-
Stop all the instances of SAP and then shutdown the database.
Shutdown the second node and then shutdown the database.
Brought offline the ORACLE<SID> group and then shutdown the database.
Kind Regards

Hi,
ORA-12560: TNS:protocol adapter error"
The above error message comes if Oracle Listener service is not running. Start Oracle TNS Listener service, if it is not running.
You can create control file while your Primary Database is ONLINE. Use the below mentioned command to create standby control file and use it for recovery at Standby database.
ALTER DATABASE CREATE STANDBY CONTROLFILE AS '/path/to/controlfile.ctl';
If you want to Start/Stop SAP/ORACLE in MCSC environment then refer the steps mentioned in these threads, [thread1|Re: how to start/stop a MSCS clustered SAP system?; and [thread2|Stop sap and oracle on MSCS;.
Regards,
Bhavik G. Shroff

Oracle Installation for Production Environment.

Hi All,
We need to install Oracle in our production environment.
But since there is no DBA in our project, we need to do it by ourself.
I was just wondering what all steps and cautions I need to take to install it.
I was told just double click on Setup.exe :-) and that would suffice.
I am pretty sure its not that easy, atleast for a production environment.
We might need to set some params, may be.
We are at present using Oracle 10g Rel 1.
Any help/suggestion would be highly appreciated.
Thanks in Advance,
Tanuja

Well, it does more complicate than a double click of setup.exe, especially for a production database.
It's not only about the installation, also think about how do you want to create your database, the storage configuration, database configuration, and backup/recover strategy etc.
For installation, make sure you follow Oracle installation guide,
http://download.oracle.com/docs/html/B10130_02/toc.htm
And there are many other document here
http://www.oracle.com/pls/db10g/portal.portal_demo3?selected=1

Oracle Configuration Manager (OCM) and Software Configuration Manager (SCM)

Hi
Has anyone been able to install OCM(Oracle Configuration Manager, v 10.2.7) and
successful upload new Software Configurations to Metalink 3?
We have managed to download the OCM software (version 10.2.7), version 10.3.0 does not seam to be available
although it is the default suggestion from the download manger for the
"Oracle Configuration Manager Family" products.
We have also been able to install the OCM software in out Windows 2003/Siebel 8.0 development
environment. The connection to Metalink/Oracle configuration server even trough a proxy is
looking fine. We even get confirm/success message for the upload.
The only problem is, we don't event one day after doing the upload, see the new
configuration in Metalink 3.
Has anyone else been able to get this to work?
Axel

We got the configuration upload to work today and it did show up rather fast on Metalink 3. What we ended up having to do, was to install the software twice on the server once in the c:\sba80\gtwysrvr and once in the c:\sba80\siebsrvr directory.
If you are behind a proxy remember to use the -p parameter when calling setupCCR.
Axel

SAP and Oracle configurations

Hi...
i'd like to know which kind of configuration recommended to use Oracle database while it involving with SAP
say... in which mode Oracle DB is supposed to run.. (archivelog mode or not archive log mode)...what are the backup policies recommended to use... (whether it is RMAN backups/user managed backups...)
like wise what are the recommended settings....
Is there any link to learn those basic stuff, that relates to SAP-Oracle configurations..
NewBeee
(in this environment it uses Oracle 10.2 ver )

ADM51 is the sap education training for sap on oracle, distributing the training materials is not allowed.
You can start browsing here:
[Oracle on SDN|SAP on Oracle]
[Note 830576 - Oracle FAQ|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=830576]
Best regards
Michael

How to configure multiple dev environment in single IP

HI,
I have a WLS running on a Windows NT machine. I want to configure multiple partition/environment
in that single WLS so that each user will have their own partition/environment to
play around. Once they are happy with their EJBs then we shall move them to a testing
environment. Is that possible in WLS??. Can anyone please guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i want is that in a single ip i wanna
multiple development environment.

Tom,
looks like you are specifying http protocol in
sky.framework.ejb.SkySessionBean.getInitialContext method.
Change it to t3 or, if the JNDI lookup is in the same JVM, don't specify
PROVIDER_URL. If you have to use http tunneling due to any reason , you have to
enable HTTP Tunneling in server to which initial context is created. It is
disabled by default in 60. You can do so via console. Please refer to
documentation , let me know if you need additional help.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Tom Purcell wrote:
Kevin,
You said that with 6.0 the following happens:
On the second server I get an error when I do
http://host:secondServerPort/index.html
Is this the error you get on the Admin Server:
<Feb 28, 2001 12:42:24 PM EST> <Info> <HTTPTunneling> <Login rejected with
code: 'Failed', reas
on: You are trying to use http tunneling
The server will not let you connect'>
<Feb 28, 2001 12:42:24 PM EST> <Error> <HTTP> <Problem dispatching servlet
request
weblogic.common.T3Exception: You are trying to use http tunneling
The server will not let you connect
at weblogic.socket.TunnelLogin.rejectConnection(TunnelLogin.java:87)
at weblogic.socket.TunnelLogin.service(TunnelLogin.java:59)
at
weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
467)
at
weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:638)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
And on the Managed Server:
<Feb 28, 2001 12:42:24 PM EST> <Error> <ConnectionManager> <Could not
connect to: '0S:127.0.0.1
:[-1,7001,-1,-1,-1,-1,-1]'
java.net.ProtocolException: Tunneling result unspecified - is the HTTP
server at host: 'localho
st' and port: '7001' a WebLogic Server?
at
weblogic.rjvm.http.HTTPClientJVMConnection.handleNullResponse(HTTPClientJVMC
onnectio
n.java:152)
at
weblogic.rjvm.http.HTTPClientJVMConnection.connect(HTTPClientJVMConnection.j
ava:194)
at
weblogic.rjvm.http.HTTPClientJVMConnection.createConnection(HTTPClientJVMCon
nection.
java:98)
at weblogic.rjvm.Protocol.createConnection(Protocol.java:207)
at
weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.jav
a:997)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:364)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:330)
at
weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:228)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:188)
at
weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:180)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:149)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:232)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:174)
at
weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
ory.java
:123)
at
javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:668)
at
javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at
sky.framework.ejb.SkySessionBean.getInitialContext(SkySessionBean.java:112)
at
sky.framework.ejb.SkySessionBean.setSessionContext(SkySessionBean.java:94)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanImpl.setSessionCo
ntext(Sk
yReferenceSessionBeanImpl.java:87)
at
weblogic.ejb20.internal.StatelessEJBHome.createBean(StatelessEJBHome.java:22
9)
at
weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.jav
a:90)
at
weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:7
5)
at
weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:67)
at
weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:113)
at
weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java
:55)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl.setDataSou
rce(SkyR
eferenceSessionBeanEOImpl.java:22)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl_WLSkel.inv
oke(SkyR
eferenceSessionBeanEOImpl_WLSkel.java:161)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:103
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
7)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Thanks,
Tom
<Feb 28, 2001 12:42:24 PM EST> <Info> <ConnectionManager> <Bootstrap unable
to get a: 'Protocol
: 'http'' connection to: 'localhost/127.0.0.1' on port: '7001'>
"Kevin Apte" <[email protected]> wrote in message
news:[email protected]...
This advice applies to WL5.1. I have been trying to configure a
multiinstance Weblogic with no success. I want multiple copies
of the sample petStore available for test by multiple users.
I think in 6.0
You would need to open an admin server
Open the configuration file for say PetStore.
Clone the petStore- call it petStore2. .
Create a copy of the startup script and modify it to start PetStore2.
After doing this only one config.xml is created for both servers.
I am able to start the first server and view the petStore application,
On the second server I get an error when I do
http://host:secondServerPort/index.html
How does one create multiple instances in WL6.0 using the console
or using a XML editor ?
Jesse E Tilly <[email protected]> wrote:
[This followup was posted to weblogic.developer.interest.management
and
a copy was sent to the cited author.]
In article <[email protected]>, [email protected]
says...
HI,
I have a WLS running on a Windows NT machine. I wantto configure multiple partition/environment
in that single WLS so that each user will have theirown partition/environment to
play around. Once they are happy with their EJBs thenwe shall move them to a testing
environment. Is that possible in WLS??. Can anyoneplease guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i wantis that in a single ip i wanna
multiple development environment.
NT isn't a multiuser environment. I will assume that
you mean some
Win32 box sitting in a room where people can copy their
classes/EJBs and
test their stuff. If this is the case, the setup is easy.
Create a directory and startup script for every developer.
Have a
global properties file in the same directory as the scripts
so that
common settings are, well, common. Tell each user to
modify the various
parts of the properties files in their directories to
deploy EJBs and
register servlets, etc etc.
In each startup script, you will have to specify the server
directory
and the binding port for each person. Pick a port (something
easy to
remember and high, like 30000, 30001, etc etc) for each
person. Why?
Well, when they connect to the app server, they'll know
they're hitting
only their server. Also, TCP/IP won't let more than one
JVM bind to the
same port, so if you want simultaneous instances (> 4
you better have
one kick ass Win32 box) you have to do this.
Hope this solves your problem.
JT
Senior Developer, HotelTools INC
[email protected]

How to configure Oracle Configuration Manager in R12.0.4

Dear
I need to configure oracle configuration manager for my running R12.0.4 instance on single node setup.Whenever i try update my metalink credentials in oracle application manager dashboard,it says userid or password is wrong. While installation i skip the OCM screen. How can i configure it now either using Universal installer or comand line? Need all steps for setup?
Do i need to download & install OCM client or is it already shipped with software & needs just configuration setup?
Help me!
Regards

Ateeq,
Running AutoConfig should populate profile options with the correct values. However, you can check the values after running AutoConfig to verify it.
According to metalink document id, this Applications Server-Side Proxy Host And Domain profile needs to changed. Document id, will mention later.I forgot.Below are the notes:
Note: 297689.1 - Unable to update MetaLink credentials from OAM
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=297689.1
Note: 308369.1 - Unable to Connect to MetaLink from OAM After Updating MetaLink Credentials
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=308369.1

How do I install Oracle Configuration Manager in oracle Fusion - discoverer 11i

Hello Gurus,
I need some guidance to install Oracle Configuration Manager.
I have just successfully installed Oracle Fusion - following "Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1.6.0) (Part Number E10421-07)" without OCM. I have EBS 12.1.3 and rdbms 11.2.0 on the same server.
Thanks
Mathias

ikaros wrote:
I have installed OracleAS 10g. What should I download now in order to install Oracle Portal 10g?Portal (actually Portal and wireless) is one of the three installation types of a full-fledged OAS 10g in release 1 and 2.
You need to have an infrastructure as a pre-requisite for a portal type OAS installation.
Please see this [link and the whole guide - click Content on the top-right|http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/mt.htm#sthref508] for details and then decide what have you installed that you are referring to as OAS 10g.
thanks,
AMN

Oracle Configuration Manager - EBS R12.1.1

Hi ,
EBS R12.1.1, on OEL 5.4
Is there forums for Oracle Configuration Manager?
I am trying to configure it, but as usual the docs is very topsiturvy.
Identifying If Oracle Configuration Manager Is Already Installed or Configured
Oracle Configuration Manager is included with many Oracle product lines. To verify if
it has been included, check for the presence of the ccr directory under $ORACLE_
HOME. If the ccr directory exists, you must verify whether it has been configured.
■ Navigate to the ccr/bin directory and locate emCCR. If emCCR exists, OCM has
been configured.
■ If emCCR is not present under the ccr/bin directory, OCM has been installed but
not configured.
If the ccr directory does not exist, Oracle Configuration Manager has not been
included with your Oracle release.
Note: For the middle-tier of Oracle E-Business Suite Release 12
installations, check for the presence of the ccr directory under the
$INST_TOP/ocm/10.1.2/ and $INST_TOP/ocm/10.1.3/
directories.
For the database tier, the ccr directory can be found
under $ORACLE_HOME.I searched the "ccr" at the apps tier:
[appldev1@apps1 ~]$ cd /u01/appldev1
[appldev1@apps1 appldev1]$ ls
DEV1
[appldev1@apps1 appldev1]$ find . -name "ccr"
./DEV1/apps/tech_st/10.1.3/ccr
./DEV1/apps/tech_st/10.1.2/ccr
./DEV1/apps/apps_st/appl/fv/12.0.0/mds/ccr
./DEV1/apps/apps_st/comn/java/classes/oracle/apps/fv/ccrAnd I searched the "ccr" at the database tier:
[root@apps1 ~]# cd /u02/oradev1
[root@apps1 oradev1]# find . -name "ccr"
./DEV1/db/tech_st/11.1.0/ccrWhy is that there are lots of "ccr" directories in the appstier?
And there is also existing on the dbTier.
Where should I install the OCR? in the apps tier or db tier or both?
Thanks a lot
MsK

Hi user;
If you follow Note:Oracle Configuration Manager and E-Business Suite Release 12 Release Notes [ID 406369.1]
As you can see in note +"Starting with Release 12, Oracle has updated the Oracle E-Business Suite Rapid Install, Rapid Clone, and AutoConfig tools to incorporate support for installing and configuring OCM."+
Please check your Applications context file via section 1. The information will appear in your in the following variables:
After you confirm this,please check Section 2: Configuring OCM after Installing Release 12
Modify your Applications context file on each node to add the CSI, OracleMetaLink user name, country code, and proxy values.
Its mean take backup of Applications context file on each node than add add upper information to your Applications context file on each node and run autconfig each node.(For adding parameter,please follow section 1. The information will appear in your in the following variables: )
If you dont know how you can edit Applications context file please check:
Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12 [ID 387859.1]
Regard
Helios

Registration Service is unavailable (500); Oracle Configuration Manager

Getting error while installing OCM in red hat 4 linux server.
setupCCR -R ocm.rsp
** Registering installation with Oracle Configuration Manager server(s) **
Failure in registering with Oracle Configuration Manager server
Error encountered in registering. Registration Service is unavailable (500).

i am using proxy server , a day back it is wrking fine , but today i am seeing this error.
How can i test opening web page from my server ?Please let me know the steps?

Timeout in Oracle Configurator Developer responsibility

The configurator html page timesout in 2 to 5 mins so in our production instance. The users had to logout and login.
Navigation: Oracle Configurator Developer-> Configurator developer. If we do not touch the screen for 5 minutes and then then click on something, we are getting time out due to idle session error and the user has to log back in again.
We are able to consistently see this behavior in production.
Any ideas how to solve this?

Please see if then following docs help.
Getting 'Your Login Session Has Expired' Errors In Configurator [ID 364766.1]
Configurator Time Out Issue Causing Error [ID 1312974.1]
Webui Initialization Failure, Java.Lang.Outofmemoryerror [ID 412697.1]
Please also check Apache log files (error_log and access_log) for details about the error.
For production issues, please always log a SR.
Thanks,
Hussein

Quartz Scheduler in Oracle SOA 10g clustered environment

Hi,
I was able to successfully test the usage of Quartz scheduler in our Oracle SOA 10g dev environment. Our dev is single instance where as our Test and Prod are clustered. I would like to know if the scheduler works in clustered environment. I wasn't able to find any documentation specific to Quartz for Bpel. If it can be done can you provide some guidance.
I really appreciate your help
Jagan.

Jagan
The schedulers do work on cluster environment. The trick is that every node has its oc4j containers, so you will need to deploy the scheduler process to every node in the cluster.
Suppose you have two nodes, and have a requirement to run certain process every two hours. You schedule the process in DEV environment to run every two hours. But in cluster you will specify to run every four hours on both the nodes. In simple explanation, node 1 will fire the process at 0,4,8, ... hours and node 2 will fire at 2, 6, 10, ... hours. So, the result is that your process is still running every two hours.
Hope this will help ...

Preventing Item On Hand reservation in a configure to order environment for multi org same OU environment

I have a scenario in a configure to order environment where I want to automatically creating flow schedules based on sales order demand. I have two orgs in same OU.
1. How to setup sales order line to generate flow schedules in the manufacturing org and then ship the finished goods from the shipping org. I believe this can be done from sourcing rules to populate Warehouse field in sales order line with the shipping org and create Flow schedule in another manufacturing org. Please advise ?
2. Once flow schedule is completed I want to prevent the reservation of Finished good on hand against Sales order so that the On hand could be transferred to shipping org and shipped. Please advise ?
Thanks for your inputs.
Best,
Rajesh

Pl do not post duplicates - Preventing Item On Hand reservation in a configure to order environment for multi org same OU environment

Decimal Numbers in Oracle Configurator

We are trying to use decimal numbers in a parent Option Class, such the example below:
Item Type Qty
- 000000x Option Class 0,14444
- 00000xx Option Class 1
What occurs:
When I used decimal numbers on an option class, the structure down of it and the same level of it doesn´t updating on Oracle Configurator.
There are any error message. But seems that the structure of this point to down is being ignored.
Today I have ~5,000 items that use the same structure on my BOM that would need to use this funcionality because the unit of measure is liter, and these items have different quantities of consume and all of them can be configured on Oracle Configurator.
E.g (According the width of the product that were configured, the quantity of paint necessary to build this product can be variable )
I don´t know if it´s work because i know that OM have some limitations about, but maybe somebody can help me in this issue.
Tks!

Have you found any solutions on this yet?
I have a similar problem and have an SR open at the mo for it! I am wanting to feed a decimal value out of the model and assign it against the (selected) child of the (selected) option class.
I have learnt to far that inventory is limited to 4 decimal places so its not going to work if you go over this number.
Then i learnt that an option class will nto support decimal places at all so you need to feed it directly to the child/ren and skip the option class. To do this I set up a Total feature and in my calculation rule I contributed the output to the Total feature. Then the total feature sends the output value to the child by the rule:
Contribute 'Dummy' * &x1.state() To &x1 FOR ALL &x1 IN {'MJ OUTER MAT OC'.Options()};
This isn't the correct solution but its nearly there. This assigns the value to all the children of the OC and not just the one that is required causing the whole model to fall over. If you have any solution to your issue or anyone can help me with this one, would be much appreciated.
Vikki

Oracle configuration in Redwood environment

Similar Messages

Maybe you are looking for