Oracle CRS(10.1) installation fails

Hi,
Following is a detailed synopsis of my unsuccessful attempt at installing Oracle Cluster Ready Services(10.1) on a two node Windows 2000 advanced server system with external SCSI hard disk.
Following is the Configuration of both the Nodes
1.Intel Pentium P4 2.80 Ghz CPU
2.512 MB RAM
3.37 GB HDD
4.Windows 2000 Advanced Server SP4
5.Adaptec SCSI CARD 39160 ULTRA160 SCSI Controller
6.Two -10/100 Mbps Fast Ethernet PCI Adapter (DLINK)
Clusterware
Oracle Cluster Ready Services 10.1.0.2
Configuration for SCSI
1.Model Make :SEAGATE
2.Model Number :ST336607
3.Firmware: 0007
4.Model Name: Cheetah 10K.6
5.Capacity: 36.7GB
6.Speed: 10000 rpm
Following are the pre-installation steps.
1.The system setup involved 2 identical nodes with Windows 2000 Advanced Server SP4 OS.
2.Two static Public IP's for both the nodes
3.Two private IP's which can be pinged. (1st Node Private IP 10.10.10.2 2nd Node Private IP 10.10.10.3)
4.Entry of the private IP's can also be found in the host file.
5.ORA_DBA win group was created on both the nodes.
6.Both the nodes are connected to a external SCSI hard disk
CRS installation Steps
1.On the Cluster Configuration page the Public Node Names and corresponding Private Node Names were entered.
2.On the Network Interface Usage Page one interface was selected as Public (192.168.144.0) and the other interface was selected as Private (10.10.10.0)
3.On Disk formatting Options page the âDo not format any logical drives was selectedâ.
4.Finally the Logical partitions made on the SCSI hard disk were assigned to the OCR and voting disk.
OUI installed the Oracle folder and services on the primary node and on the remote node. But failed to start the services on both the nodes.
Following is snippet of the OUI installing log.
Save Cluster Inventory
Error occured while trying to stop service OracleOUIOraCr10g_homeService on one or more cluster nodes. Please stop service on nodes pc-p41300 using the Service Control Manager.
Invoking OUI on cluster nodes pc-p41300
C:\DOCUME~1\salil\LOCALS~1\Temp\OraInstall2005-01-04_09-19-56PM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\salil\LOCALS~1\Temp\OraInstall2005-01-04_09-19-56PM\jre\1.4.2 -paramFile C:\DOCUME~1\salil\LOCALS~1\Temp\OraInstall2005-01-04_09-19-56PM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -local -noClusterEnabled ORACLE_HOME=D:\oracle\product\10.1.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=PC-P41295,pc-p41300 CRS=true
PRKC-1010 : Failed to stop the service on all nodes
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'
Start output from spawned process:
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: pc-p41300 pc-p41300-node pc-p41300
node 2: pc-p41295 pc-p41295-node pc-p41295
Creating OCR keys for user 'salil', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk
Successful in setting block0 for voting disk.
Format complete.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
pc-p41300 service OracleCSService in improper STOPPED state, err(997)
PC-P41295 service OracleCSService in improper PENDING state, err(997)
Following errors were also observed at Operating System Level
Event ID:11
Description: The driver detected a controller error on \Device\SCSI\adpu160m1
Note: adpu160m is the driver for the adaptec controllers
Event ID:9
Description: The device, \Device\SCSI\adpu160m1, did not respond within the time out period.
Since the above method failed following alternate method was tired
The CRS software was installed on just one node. This installation went about without any problems with all the services up and running.
Using the ADDNode utility provided by CRS another node was added. But again when CRSSetup.exe tried to start the services on the remote node following error was encountered.
PC-P41300 service OracleCSService in improper PENDING state, err(997)
I would be grateful if some could help me with this problem.
Thanking you in Anticipation,
Regards,
Salil([email protected])

sa**** wrote:
Hi,
Following is a detailed synopsis of my unsuccessful attempt at installing Oracle Cluster Ready Services(10.1) on a two node Windows 2000 advanced server system with external SCSI hard disk.
Following is the Configuration of both the Nodes
1.Intel Pentium P4 2.80 Ghz CPU
2.512 MB RAM
3.37 GB HDD
4.Windows 2000 Advanced Server SP4
5.Adaptec SCSI CARD 39160 ULTRA160 SCSI Controller
6.Two -10/100 Mbps Fast Ethernet PCI Adapter (DLINK)
Clusterware
Oracle Cluster Ready Services 10.1.0.2
Configuration for SCSI
1.Model Make :SEAGATE
2.Model Number :ST336607
3.Firmware: 0007
4.Model Name: Cheetah 10K.6
5.Capacity: 36.7GB
6.Speed: 10000 rpm
Following are the pre-installation steps.
1.The system setup involved 2 identical nodes with Windows 2000 Advanced Server SP4 OS.
2.Two static Public IP's for both the nodes
3.Two private IP's which can be pinged. (1st Node Private IP 10.10.10.2 2nd Node Private IP 10.10.10.3)
4.Entry of the private IP's can also be found in the host file.
5.ORA_DBA win group was created on both the nodes.
6.Both the nodes are connected to a external SCSI hard disk
CRS installation Steps
1.On the Cluster Configuration page the Public Node Names and corresponding Private Node Names were entered.
2.On the Network Interface Usage Page one interface was selected as Public (192.168.144.0) and the other interface was selected as Private (10.10.10.0)
3.On Disk formatting Options page the âDo not format any logical drives was selectedâ.
4.Finally the Logical partitions made on the SCSI hard disk were assigned to the OCR and voting disk.
OUI installed the Oracle folder and services on the primary node and on the remote node. But failed to start the services on both the nodes.
Following is snippet of the OUI installing log.
<HR>
Save Cluster Inventory
Error occured while trying to stop service OracleOUIOraCr10g_homeService on one or more cluster nodes. Please stop service on nodes pc-p41300 using the Service Control Manager.
Invoking OUI on cluster nodes pc-p41300
C:\DOCUME~1\salil\LOCALS~1\Temp\OraInstall2005-01-04_09-19-56PM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\salil\LOCALS~1\Temp\OraInstall2005-01-04_09-19-56PM\jre\1.4.2 -paramFile C:\DOCUME~1\salil\LOCALS~1\Temp\OraInstall2005-01-04_09-19-56PM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -local -noClusterEnabled ORACLE_HOME=D:\oracle\product\10.1.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=PC-P41295,pc-p41300 CRS=true
PRKC-1010 : Failed to stop the service on all nodes
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'
Start output from spawned process:
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <NODENUMBER>: <NODENAME><PRIVATE name interconnect><HOSTNAME>
node 1: pc-p41300 pc-p41300-node pc-p41300
node 2: pc-p41295 pc-p41295-node pc-p41295
Creating OCR keys for user 'salil', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk
Successful in setting block0 for voting disk.
Format complete.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
<HR>
pc-p41300 service OracleCSService in improper STOPPED state, err(997)
PC-P41295 service OracleCSService in improper PENDING state, err(997)
<HR>
Following errors were also observed at Operating System Level
Event ID:11
Description: The driver detected a controller error on \Device\SCSI\adpu160m1
Note: adpu160m is the driver for the adaptec controllers
Event ID:9
Description: The device, \Device\SCSI\adpu160m1, did not respond within the time out period.
Since the above method failed following alternate method was tired
The CRS software was installed on just one node. This installation went about without any problems with all the services up and running.
Using the ADDNode utility provided by CRS another node was added. But again when CRSSetup.exe tried to start the services on the remote node following error was encountered.
PC-P41300 service OracleCSService in improper PENDING state, err(997)
I would be grateful if some could help me with this problem.
Thanking you in Anticipation,
Regards,
Salil([email protected]) 
I do not know what you're talking about, I'm new to this.

Similar Messages

Oracle CRS(10.2) installation fails - service OracleCSService in improper

Hello,
I been trying to install Oracle RAC 10g R2, in a VmWare client machine with Windows 2003 SE, as you can see, the check commands run, showing all configuration is fine, except for the VIP part, installation passed smoothly, till the Configuration assistance, I got this error:
Step 5: Starting up CRS stack on all nodes
rac1 service OracleCSService in improper PENDING state, err(997)
rac2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Clusterware Configuration Assistant" failed
The "C:\oracle\product\10.2.0\nbcrs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
1. I Confirm that your public interface is listed before the private interface in the advanced settings of your network properties
2. I Confirm that you enabled automounting of external disks using diskpart
When I tried to start the OracleCRService service using SC, it hangs & not starts.
Please I need your help, solve this problem,
Kind regards,
Nabil
find below the diagnostic check done before installation and error message displayed:
C:\Documents and Settings\Administrator>C:\10201_clusterware_win32\clusterware\cluvfy\runcluvfy.bat
stage -pre crsinst -n rac1,rac2 -verbose
C:\Documents and Settings\Administrator>REM By Nabil @echo off
C:\Documents and Settings\Administrator>REM
C:\Documents and Settings\Administrator>REM This script sets up the environment for invocation of cl
uster verification
C:\Documents and Settings\Administrator>REM tool (cluvfy), unpacks the archive (cluvfy.zip) for the
verification
C:\Documents and Settings\Administrator>REM framework software, executes the requested verification
command, and cleans
C:\Documents and Settings\Administrator>REM up the space occupied by the unpacked verification softw
are.
C:\Documents and Settings\Administrator>REM
C:\Documents and Settings\Administrator>REM Usage: cluvfy.bat <cluvfy command options>
C:\Documents and Settings\Administrator>setlocal
C:\Documents and Settings\Administrator>REM Setup CV_HOME environment variable for cluvfy
C:\Documents and Settings\Administrator>REM This variable points to the home for cluster verificatio
n software.
C:\Documents and Settings\Administrator>REM If not set by the caller of this script, it points (by d
efault)
C:\Documents and Settings\Administrator>REM to temporary directory
C:\Documents and Settings\Administrator>if () == () ()
C:\Documents and Settings\Administrator>Rem
C:\Documents and Settings\Administrator>rd /S /Q C:\temp\cvtmphome
The system cannot find the file specified.
C:\Documents and Settings\Administrator>md C:\temp\cvtmphome
C:\Documents and Settings\Administrator>REM Setup CV_JDKHOME environment variable for cluvfy
C:\Documents and Settings\Administrator>REM This variable points to the java package required by clu
ster verification
C:\Documents and Settings\Administrator>REM framework
C:\Documents and Settings\Administrator>REM If this varible isn't set by the caller of this script,
the jrepack.zip
C:\Documents and Settings\Administrator>REM archive is unpacked in C:\temp\cvtmphome\jre directory a
nd this directory is
C:\Documents and Settings\Administrator>REM set in CV_JDKHOME
C:\Documents and Settings\Administrator>if () == () (
if not exist \10201_clusterware_win32\clusterware\cluvfy\jrepack.zip goto JDKHOME_ERROR
\10201_clusterware_win32\clusterware\cluvfy\..\install\unzip -o \10201_clusterware_win32\clusterwar
e\cluvfy\jrepack.zip -d C:\temp\cvtmphome\jre 1>NUL
if not errorlevel 0 goto JRE_ZIP_ERR
C:\Documents and Settings\Administrator>REM Setup CV_DESTLOC environment variable for cluvfy
C:\Documents and Settings\Administrator>REM This variable points to a directory on each (remote as w
ell as local) node
C:\Documents and Settings\Administrator>REM that is writable. The cluster verifcation tool will copy
the required
C:\Documents and Settings\Administrator>REM software bits (on need basis) to this directory.
C:\Documents and Settings\Administrator>REM If not set by the caller of this script, it points (by d
efault)
C:\Documents and Settings\Administrator>REM to temporary directory
C:\Documents and Settings\Administrator>if () == () ()
C:\Documents and Settings\Administrator>REM Unpack the cluster verification software archive on its
home
C:\Documents and Settings\Administrator>\10201_clusterware_win32\clusterware\cluvfy\..\install\unzip
-o \10201_clusterware_win32\clusterware\cluvfy\cvupack.zip -d C:\temp\cvtmphome 1>nul
C:\Documents and Settings\Administrator>if not errorlevel 0 goto CVU_ZIP_ERR
C:\Documents and Settings\Administrator>REM Execute the requested cluster verification command
C:\Documents and Settings\Administrator>CALL C:\temp\cvtmphome\bin\cluvfy.bat stage -pre crsinst -n
rac1,rac2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
rac2 yes
rac1 yes
Result: Node reachability check passed from node "rac1".
Checking user equivalence...
Check: User equivalence for user "Administrator"
Node Name Comment
rac2 passed
rac1 passed
Result: User equivalence check passed for user "Administrator".
Checking administrative privileges...
Checking node connectivity...
Interface information for node "rac2"
Interface Name IP Address Subnet
public 192.168.2.102 192.168.2.0
private 192.168.0.102 192.168.0.0
Interface information for node "rac1"
Interface Name IP Address Subnet
public 192.168.2.101 192.168.2.0
private 192.168.0.101 192.168.0.0
Check: Node connectivity of subnet "192.168.2.0"
Source Destination Connected?
rac2:public rac1:public yes
Result: Node connectivity check passed for subnet "192.168.2.0" with node(s) rac2,rac1.
Check: Node connectivity of subnet "192.168.0.0"
Source Destination Connected?
rac2:private rac1:private yes
Result: Node connectivity check passed for subnet "192.168.0.0" with node(s) rac2,rac1.
Suitable interfaces for the private interconnect on subnet "192.168.2.0":
rac2 public:192.168.2.102
rac1 public:192.168.2.101
Suitable interfaces for the private interconnect on subnet "192.168.0.0":
rac2 private:192.168.0.102
rac1 private:192.168.0.101
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
Check: Operating system version
Node Name Available Required Comment
rac2 Windows Server 2003 Windows Server 2003 passed
rac1 Windows Server 2003 Windows Server 2003 passed
Result: Operating system version check passed.
Check: Total memory
Node Name Available Required Comment
rac2 823.49MB (843252KB) 512MB (524288KB) passed
rac1 823.49MB (843252KB) 512MB (524288KB) passed
Result: Total memory check passed.
Check: Swap space
Node Name Available Required Comment
rac2 1.96GB (2057180KB) 1GB (1048576KB) passed
rac1 1.96GB (2057180KB) 1GB (1048576KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
rac2 32-bit 32-bit passed
rac1 32-bit 32-bit passed
Result: System architecture check passed.
Check: Free disk space in "C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp" dir
Node Name Available Required Comment
rac2 3.36GB (3519968KB) 400MB (409600KB) passed
rac1 3.2GB (3359292KB) 400MB (409600KB) passed
Result: Free disk space check passed.
System requirement passed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes.
C:\Documents and Settings\Administrator>
==== ====== = === = == = = == = == ===
Output generated from configuration assistant "Oracle Clusterware Configuration Assistant":
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\nbcrs/install/crssetup.config.bat
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\nbcrs)
Step 3: configuring OCR repository
Oracle Cluster Registry already initialized
Step 4: configuring safe mode for CRS stack
Step 5: Starting up CRS stack on all nodes
rac1 service OracleCSService in improper PENDING state, err(997)
rac2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Clusterware Configuration Assistant" failed
The "C:\oracle\product\10.2.0\nbcrs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------

Here is the log error which i got. Can any one give the pointer to configure.
[ CSSD]2007-03-09 18:48:55.750 [2708] >TRACE: clssnmDoSyncUpdate: Sync Complete!
[ CSSD]2007-03-09 18:48:55.750 [2524] >TRACE: clssnmvFatalCheck: missing node 2
[ CSSD]2007-03-09 18:48:55.750 [2524] >TRACE: clssnmvFatalCheck: fatal 0, sclsfatal 0
[ CSSD]2007-03-09 18:48:55.828 [3844] >TRACE: clssgmReconfigThread: started for reconfig (1)
[ CSSD]2007-03-09 18:48:55.828 [3844] >USER: NMEVENT_RECONFIG [00][00][00][02]
[ CSSD]2007-03-09 18:48:55.828 [3844] >TRACE: clssgmEstablishConnections: 1 nodes in cluster incarn 1
[ CSSD]2007-03-09 18:48:55.828 [1880] >TRACE: clssgmPeerListener: connects done (1/1)
[ CSSD]2007-03-09 18:48:55.828 [3844] >TRACE: clssgmEstablishMasterNode: MASTER for 1 is node(1) birth(1)
[ CSSD]2007-03-09 18:48:55.828 [3844] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
[ CSSD]2007-03-09 18:48:55.828 [3844] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
[ CSSD]2007-03-09 18:48:55.828 [3844] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
[ CSSD]CLSS-3000: reconfiguration successful, incarnation 1 with 1 nodes

Oracle grid and db installer fails upon launch - win7x64

Hi. First let me say this is not my first time installing Oracle. I have installed oracle on Linux (just DB, ASM + DB) and Windows 7 x64 (just DB) successfully in the past. I've been working with Oracle for several years now. I'm a developer, not a DBA.
I'm attempting a new development installation on my home computer, which is running Windows 7 64-bit. I've downloaded the 64 bit media for the database and grid infrastructure.
My machine is a quad core i5 with 8GB ram. The storage is as follows:
1 x 64GB SSD (C: drive with Windows installation, 20GB free)
1 x 3TB spinning (D: drive, all program data, 2.8TB free)
4 x 1TB spinning (unmounted, unformatted, for use with ASM)
I have installed both the 32 bit and 64 bit current JDK.
I am logged in as an Administrator.
I have the oracle installation media in:
D:\Temp\grid
D:\Temp\database
I have the ORACLE_BASE system environment variable set to:
D:\Oracle (this directory exists, and is empty)
Steps to produce problem:
Start > All Programs > Accessories > Terminal (Right click, run as Adminstrator)
Command Prompt input pasted below:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>D:
D:\>cd \temp\grid
D:\Temp\grid>setup
D:\Temp\grid>
Oracle installer quits immediatly
I am left with an install actions log file in D:\Users\myuser\AppData\Local\Temp\OraInstall<currenttimestamp>\
The log file contains:
Using paramFile: D:\Temp\grid\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
The number of files bootstrapped for the jre is 0.
The number of files bootstrapped for the oui is 0.
There are no errors in the Windows event viewer.
Any steps as to what I can check would be great, I've never seen this behavior before. Thanks.

Wow. I found the solution buried here: Re: Can't run Oracle 11g r2 setup.exe on win2008 r2 sp1 x64
Apparently if the amount of free space is too great (you're kidding me, right Oracle?!) the installer will just die. Sounds like a bug that someone should look into fixing....
So from the post I've mentioned above, I gather that you need less than 2 TB of free space. I navigated to my D drive and did the following:
D:\Temp>fsutil file createnew imhuge.dat 1024000000000
File D:\Temp\imhuge.dat is created
Now, the OUI happily starts.

Oracle 8.1.6 Installation fails with java.lang.NullpointerException

HI,
We are installing Oracle 8.1.6 on a D Class machine running HPUX 11.0 OS
While i start the Universal Installer, it fails with the following
error.
Warning: Missing charsets in String to FontSet conversion
Warning: Cannot convert string "-dt-interface
system-medium-r-normal-s*-*-*-*-*-*-*-*-*" to type FontSet
Warning: Missing charsets in String to FontSet conversion
Warning: Cannot convert string "-dt-interface
user-medium-r-normal-s*-*-*-*-*-*-*-*-*" to type FontSet
Exception java.lang.NullPointerException occurred..
java.lang.NullPointerException
at sun.awt.motif.MComponentPeer.setFont(MComponentPeer.java:197)
at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:73)
at sun.awt.motif.MToolkit.createFrame(MToolkit.java:177)
at java.awt.Frame.addNotify(Frame.java:203)
at java.awt.Window.show(Window.java:143)
at java.awt.Component.show(Component.java:511)
at java.awt.Component.setVisible(Component.java:473)
at
oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:419)
My ORACLE_TERM is set to dtterm.
Can anybody give some suggestions what would be the problem..?
Thanks
vinod
null

Pretty much the same thing, Tomcat is the web server in CUCM, so that should have been sufficient.
Please rate all useful posts!
Chris

Oracle Database Configuration Assistant Installation Failed

I am installing Oracle8i for linux on a Redhat 6.0 box (dual
PII-350, 256 MB RAM). At the end of a "typical" installation run
from the runInstaller, it says:
"A required command line argument is missing."
And the ODCA failed to create the database. Net8 configuration
assistant was installed fine.
If I run the svrmgrl :
sh-2.03$ ./svrmgrl
Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> connect
Username: internal
Connected.
SVRMGR> startup
LRM-00109: Kan ikke bne parameterfilen '?/dbs/[email protected]'
ORA-01078: failure in processing system parameters
What's wrong here?
Thanks for any insights.
-Dong
null

: : : LRM-00109: Kan ikke bne parameterfilen '?/dbs/[email protected]'
=The message is in Danish
Hermann Ragaller (guest) wrote:
: I think that is a know bug in the installer.
: Ignore the problem and start the db assistant from the command
: line afterwards:
: $ dbassist
: I created the database this way. The option "copy seed database
: from cd" did not work because it could not see the cd, so I
: choose create from scratch. That worked fine.
: Btw, I had the same strange message - its not german, looks
more
: like swedish or dutch to me...
: Hermann
: Simon Griffiths (guest) wrote:
: : I'm not sure what the bit of German means, but I'm pretty
sure
: : oracle cannot find your parameter file to open the database
: with.
: : By default it looks in a file
: : $ORACLE_HOME/dbs/init${ORACLE_SID}.ora
: : You probably don't have one of these !
: : Have you set $ORACLE_SID yet ?
: : I gave up on the assistant and used the create scripts in
: : $ORACLE_HOME/rdbms/install/create. These work fine without
any
: : editing.
: : A mininum would be :
: : crdb1.sh i815
: : crdb2.sh i815
: : crdb3.sh i815
: : dong (guest) wrote:
: : : I am installing Oracle8i for linux on a Redhat 6.0 box
(dual
: : : PII-350, 256 MB RAM). At the end of a "typical"
installation
: : run
: : : from the runInstaller, it says:
: : : "A required command line argument is missing."
: : : And the ODCA failed to create the database. Net8
: configuration
: : : assistant was installed fine.
: : : If I run the svrmgrl :
: : : sh-2.03$ ./svrmgrl
: : : Oracle Server Manager Release 3.1.5.0.0 - Production
: : : (c) Copyright 1997, Oracle Corporation. All Rights
Reserved.
: : : Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
: : : With the Partitioning and Java options
: : : PL/SQL Release 8.1.5.0.0 - Production
: : : SVRMGR> connect
: : : Username: internal
: : : Connected.
: : : SVRMGR> startup
: : : LRM-00109: Kan ikke bne parameterfilen '?/dbs/[email protected]'
: : : ORA-01078: failure in processing system parameters
: : : What's wrong here?
: : : Thanks for any insights.
: : : -Dong
null

Oracle 8.1.6 Installation fail on RedHat Linux 6.1

The machine was running 8.1.5 on RedHat 6.1 (Sure, the installation was painful at that time, I downloaded jre1.6.5 & linux_81501patch_ee.tgz to make it works).
The problem now, is upgrading 8.1.5 to 8.1.6. Since so many people told migration is painful, so I decided to export database, remove 8.1.5, install 8.1.6 and import database.
After remove all the oracle files (I believe), I ran "runInstaller", after select "Custom" and click "Next". It immidiate shows following error:
rror in loading component installation...
Exception java.lang.NullPointerException: Occurred..
java.lang.NullPointerException:
at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.checkPreReq(OiiodDepEngine.java.2185)
at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.applySelection(OiiodDepEngine.java.1504)
at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.depModeApply(OiiodDepEngine.java.1264)
at oracle.sysman.oii.oiif.oiifw.OiifwPostModesWCCE.doOperation(OiifwpostDepModesWCCE.java:327)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiioDepWizEngine.java.339)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIteration(OiifbCondIterator.java.140)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:510)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWraper.java:110)
at oracle.sysman.oii.oiif.Oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:306)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:467)
and installation stop..
Do you have any idea?? This is production system, HELP!!!!!
null

You need unset JAVA_HOME, for example
$ JAVA_HOME=''; export JAVA_HOME
<BLOCKQUOTE>quote:<HR>Originally posted by David Wang ([email protected]):
The machine was running 8.1.5 on RedHat 6.1 (Sure, the installation was painful at that time, I downloaded jre1.6.5 & linux_81501patch_ee.tgz to make it works).
The problem now, is upgrading 8.1.5 to 8.1.6. Since so many people told migration is painful, so I decided to export database, remove 8.1.5, install 8.1.6 and import database.
After remove all the oracle files (I believe), I ran "runInstaller", after select "Custom" and click "Next". It immidiate shows following error:
rror in loading component installation...
Exception java.lang.NullPointerException: Occurred..
java.lang.NullPointerException:
at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.checkPreReq(OiiodDepEngine.java.2185)
at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.applySelection(OiiodDepEngine.java.1504)
at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.depModeApply(OiiodDepEngine.java.1264)
at oracle.sysman.oii.oiif.oiifw.OiifwPostModesWCCE.doOperation(OiifwpostDepModesWCCE.java:327)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiioDepWizEngine.java.339)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIteration(OiifbCondIterator.java.140)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:510)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWraper.java:110)
at oracle.sysman.oii.oiif.Oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:306)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:467)
and installation stop..
Do you have any idea?? This is production system, HELP!!!!!
<HR></BLOCKQUOTE>
null

Oracle OLE DB Provider installation failed...

I downloaded ODAC101040.exe (Oracle OLE DB Provider setup) from following link.
http://www.oracle.com/technetwork/database/windows/utilsoft-088126.html
My OS is Windows 7 Home Premium.
But during installation, am getting error "Abnormal Program Termination" "Unknown Unknown".
Please help, if there is a workaround please let me know.

My OS is Windows 7 Home Premium.Be aware that normally no Oracle products are certified for any Windows Home editions.
BTW, did you read installation instructions from your link ?

REG:Oracle Audit Vault Agent Installation fails at the last step .

Hi ,
I am installing Audit vault agent 10.3 and it is failing at the last on solarisis 10 sparc 64 bit .
The error is
OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
I have tried the Doc ID 1058184.1 but it fails at the end saying cannot update av.properties , If we create the the directories manually and create the av.properties file then the agent will start but it is not stopping until you kill the agent .
Moreover if i am continuing with this agent after registering the collectors i am not able to start them as i am facing the http 404 error .
So i think i need to install the audit agent successfully first .
can anybody help me please as we are on client side and it is critical deliverable .
Regards
Edited by: 836778 on May 1, 2012 4:52 PM
Edited by: 836778 on May 1, 2012 4:59 PM

In case you're still dealing with this issue:
I hit this problem when the OS user I was installing with was not in the proper OS group. I don't have the documentation in front of me right now, but make sure your user is in the DBA and/or OINSTALL group.

Oracle Audit Vault installation fails on DVCA assistant + libpthread.so.0

Hello experts, I did this post at general forums but nobody noticed anything, I need your help
I am able to install the Oracle Audit Vault Server on the following features:
OS: Suse Linux 10 SP 2
Clusterware version: 11.1.0 6
The Oracle Audit Vault server installation procces creates the database an starts the instances on each node and notice me the url for the Enterprise Manager but after that it fails at DVCA assistante because is not able to load the shared library libpthread.so.0.
I found in internet that some time there are files like srvctl, vipca, etc tha export LD_ASSUME_KERNEL ant we have to comment that line, but I do not found the line in those files. I just found in the crsctl file this line like
LD_ASSUME_KERNEL=
export LD_ASSUME_KERNEL
PD: The libpthread.so.0 library already exist
Should I comment this line at crsctl file?
Thank you in advance.

Here you are the error messages:
Is the Oracle Audit Vault server 10.2.3
Command = /opt/oracle/product/av/bin/dvca -action option -oh
/opt/oracle/product/av -s_path /opt/oracle/oradata/ -logfile
/opt/oracle/product/av/cfgtoollogs/dvca_install.log -owner_account vault
-owner_passwd ${s_ownerEncryptPwd} -acctmgr_account vault1 ${s_dvMgrPwdArg}
-jdbc_str jdbc:oracle:oci:@av1 ${s_sysPasswdArg} -languages {"en"} -racnode
seguridad1.min2.dtc -lockout
MANAGE_LISTENER start listener
MANAGE_LISTENER start listener
result=/opt/oracle/product/av/bin/dvca_start_listener.sh,127,/opt/oracle/product/av/jdk/jre/bin/java:
error while loading shared libraries: libpthread.so.0: cannot open shared
object file: No such file or directory
MANAGE_LISTENER start listener log=
MANAGE_INSTANCE start RDBMS
MANAGE_INSTANCE start RDBMS
result=/opt/oracle/product/av/bin/dvca_start_rdbms.sh,127,/opt/oracle/product/av/jdk/jre/bin/java:
error while loading shared libraries: libpthread.so.0: cannot open shared
object file: No such file or directory
MANAGE_INSTANCE start RDBMS log=
Executing task SQLPLUS_CATOLS
Executing task RESTART_SERVICES_OLS
MANAGE_INSTANCE stop isqlplus
MANAGE_INSTANCE stop OC4J
MANAGE_LISTENER start listener
MANAGE_LISTENER start listener
result=/opt/oracle/product/av/bin/dvca_start_listener.sh,127,/opt/oracle/product/av/jdk/jre/bin/java:
error while loading shared libraries: libpthread.so.0: cannot open shared
object file: No such file or directory
MANAGE_LISTENER start listener log=
MANAGE_INSTANCE start RDBMS
MANAGE_INSTANCE start RDBMS
result=/opt/oracle/product/av/bin/dvca_start_rdbms.sh,127,/opt/oracle/product/av/jdk/jre/bin/java:
error while loading shared libraries: libpthread.so.0: cannot open shared
object file: No such file or directory
MANAGE_INSTANCE start RDBMS log=
Executing task SQLPLUS_CATMAC
connect SYS:java.sql.SQLException: ORA-01034: ORACLE not available
Questions:
Is the Audit Vault Server Installation compatible with CRS version 11.1.0.6

CRS installation: Failure at final check of Oracle CRS stack.10

Hello,
I am trying to install Oracle RAC in 10GR2 to simulate a migration from 1024 to 11GR2. I am using VMWARE with two Linux CentOS 64b 6.2 and shared disks as raw devices. I got "Failure at final check of Oracle CRS stack.10" when running root.sh, on both nodes. The ocrcheck is fine, but I have two different IDs... which is not good and I do not understand why:
- I have shared raw devices
- the devices are the same, I checked this twice
Can anyoane help?
I thank you all in advance.

Hello,
The exact error message is the one in my subject description: Failure at final check of Oracle CRS stack.10
This occurs when runing root.sh after the installation is successfull and there is no way to continue, the assistants are failing, which is logic, as the root.sh attempt to configure and run the CRS agents are not done successfully. The OCR ar ok with the same ID on both nodes, the minor in major values for the raw devices are and the firewall is disabled on both nodes. I checked the rights, they are also ok. The exact and complete return of the root.sh script is the following:
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: cygnus cygnus-priv cygnus
node 2: taurus taurus-priv taurus
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /apps/oracle/oradat/vot10
Now formatting voting device: /apps/oracle/oradat/vot20
Now formatting voting device: /apps/oracle/oradat/vot30
Format of 3 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Any help will be really apreciated and I thank you in advancen guys...

Oracle Forms and Reports Installation - Creating domain failed

I installed the weblogic 10.3.6 (Oracle WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE - Package Installer) in my Microsoft Windows(32-bit JVM) system first.
But there was an error occorred when the package of forms and reports (Oracle Forms and Reports 11gR2 (11.1.2.2.0)) was installing.
Please find the following error message for your reference.
Do you have any idea? Please kindly advise.
Thanks a lot!
2014-04-02 14:11:14,099 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - read template from "C:/Users/GZ/AppData/Local/Temp//tmp1396419069239wls.jar"
2014-04-02 14:11:16,185 INFO [main] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
2014-04-02 14:11:17,556 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
2014-04-02 14:11:17,556 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:18,205 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "C:/Users/GZ/AppData/Local/Temp//tmp1396419069239wls.jar"
2014-04-02 14:11:18,477 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option ServerStartMode to "prod"
2014-04-02 14:11:18,477 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option ServerStartMode to "prod"
2014-04-02 14:11:18,490 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create Machine "PC-42A26D.GZAD.MSAD.LOCAL" as obj0
2014-04-02 14:11:18,604 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create Machine "PC-42A26D.GZAD.MSAD.LOCAL" as obj0
2014-04-02 14:11:18,612 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - find Server "AdminServer" as obj1
2014-04-02 14:11:18,652 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: find Server "AdminServer" as obj1
2014-04-02 14:11:18,698 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute Machine to "PC-42A26D.GZAD.MSAD.LOCAL"
2014-04-02 14:11:18,705 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute Machine to "PC-42A26D.GZAD.MSAD.LOCAL"
2014-04-02 14:11:18,706 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute ListenPort to "7002"
2014-04-02 14:11:18,716 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute ListenPort to "7002"
2014-04-02 14:11:18,716 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create Server!SSL "AdminServer!AdminServer" as obj2
2014-04-02 14:11:18,724 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create Server!SSL "AdminServer!AdminServer" as obj2
2014-04-02 14:11:18,735 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj2 attribute HostnameVerificationIgnored to "true"
2014-04-02 14:11:18,739 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj2 attribute HostnameVerificationIgnored to "true"
2014-04-02 14:11:18,739 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - find User "weblogic" as obj3
2014-04-02 14:11:18,755 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: find User "weblogic" as obj3
2014-04-02 14:11:18,755 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - delete obj3
2014-04-02 14:11:18,763 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: delete obj3
2014-04-02 14:11:18,764 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create User "weblogic" as obj4
2014-04-02 14:11:18,768 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create User "weblogic" as obj4
2014-04-02 14:11:18,771 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute PeriodLength to "200000"
2014-04-02 14:11:18,807 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute PeriodLength to "200000"
2014-04-02 14:11:18,807 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute IdlePeriodsUntilTimeout to "20"
2014-04-02 14:11:18,815 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute IdlePeriodsUntilTimeout to "20"
2014-04-02 14:11:18,815 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute DGCIdlePeriodsUntilTimeout to "21"
2014-04-02 14:11:18,821 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute DGCIdlePeriodsUntilTimeout to "21"
2014-04-02 14:11:18,822 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute IdleConnectionTimeout to "1000"
2014-04-02 14:11:18,830 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute IdleConnectionTimeout to "1000"
2014-04-02 14:11:18,833 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj4 attribute Password to "********"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj4 attribute Password to "********"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option OverwriteDomain to "true"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option OverwriteDomain to "true"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option JavaHome to "C:/Oracle/Middleware/jdk160_29"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option JavaHome to "C:/Oracle/Middleware/jdk160_29"
2014-04-02 14:11:18,948 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - validateConfig "KeyStorePasswords"
2014-04-02 14:11:18,953 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: validateConfig "KeyStorePasswords"
2014-04-02 14:11:18,954 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:19,441 INFO [main] com.oracle.cie.domain.DomainChecker - ListenPort internal Validation result= [null]
2014-04-02 14:11:19,441 INFO [main] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2014-04-02 14:11:21,609 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd link=Start Admin Server for Weblogic Server Domain
2014-04-02 14:11:21,659 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Oracle\Middleware\user_projects\domains\base_domain\bin\stopWebLogic.cmd link=Stop Admin Server
2014-04-02 14:11:21,667 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Windows\system32\rundll32.exe link=Admin Server Console
2014-04-02 14:11:21,759 INFO [Thread-1] com.oracle.cie.domain.DomainRegistryWrapper - need to initialize domainRegistrydocument object
2014-04-02 14:11:21,777 INFO [Thread-1] com.oracle.cie.domain.DomainGenerator - Domain Generation Successful!
2014-04-02 14:11:21,783 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: write Domain to "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - close template
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - read domain from "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,967 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,967 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
2014-04-02 14:11:22,011 WARN [main] com.oracle.cie.domain.template.dependency.TemplateSelectionTarget - Catalog does not have matching template for location C:\Users\GZ\AppData\Local\Temp\tmp1396419069239wls.jar
2014-04-02 14:11:22,071 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:22,100 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:22,101 ERROR [main] com.oracle.cie.domain.ConfigGroupsEngine$ConfigTopology - Multiple definitions of server-group BI-ADF-ADMIN-SVR are not allowed
2014-04-02 14:11:22,101 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - fail: add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
2014-04-02 14:11:22,101 ERROR [main] com.oracle.cie.domain.script.ScriptExecutor - fail: add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
com.oracle.cie.domain.ConfigGroupsException: Multiple definitions of server-group BI-ADF-ADMIN-SVR are not allowed
at com.oracle.cie.domain.ConfigGroupsEngine$ConfigTopology.merge(ConfigGroupsEngine.java:2762)
at com.oracle.cie.domain.ConfigGroupsEngine.mergeTopology(ConfigGroupsEngine.java:551)
at com.oracle.cie.domain.ConfigGroupsEngine.merge(ConfigGroupsEngine.java:479)
at com.oracle.cie.domain.AbstractTemplate.addConfigGroups(AbstractTemplate.java:314)
at com.oracle.cie.domain.script.ScriptExecutor.addTemplate(ScriptExecutor.java:605)
at com.oracle.cie.domain.script.jython.WLScriptContext.addTemplate(WLScriptContext.java:416)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.addTemplate$20(C:\Users\GZ\AppData\Local\Temp\WLSTOfflineIni364664194239939514.py:89)
at org.python.pycode._pyx3.call_function(C:\Users\GZ\AppData\Local\Temp\WLSTOfflineIni364664194239939514.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx15.f$0(C:\Users\GZ\AppData\Local\Temp\tmp1396419069304.py:42)
at org.python.pycode._pyx15.call_function(C:\Users\GZ\AppData\Local\Temp\tmp1396419069304.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:139)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)

hi user ...
on windows there are some steps in front of installation and configuration.
1) cleare the Windows Env (Path .. Programme x86 )
no Blank in Path and so on
2) insert into your local host file your server and IP Adress
3) in Windows 32 setup of WLS is JDK included so you don't have to install the jdk in front of WLS
4) verify if you are using the right installation medium (jdk 32 bit, wls 32 bit , fmw 32 bit
in your OraInventory/logs directory is a *.out file for your installation please can you put this file in the forum
is there a nodemanager up and running (if so please stop)
Jan-Peter

Oracle Grid root.sh is failing onFirstNode configuration failed at /u01/app/grid/11.2.0.4/crs/instal due to ora.oc4j start timeout

We have a 4 node Rac, oracle root.sh is failing on the First Node. when I looked at the logs I found the oc4j is timeout to start on Node1 whereas it is able to start on all other nodes with in 2 mins. this is causing to fail root.sh. Can you please help me what is the issue.
Oracle Rac Node 1 oc4j failed on Node1 due to timeout able to start on other node.
oracle:]/u01/app/grid/11.2.0.4/bin > ./crsctl start res ora.oc4j -n node1
CRS-2672: Attempting to start 'ora.oc4j' node1
CRS-2674: Start of 'ora.oc4j' on 'node1' failed
CRS-2679: Attempting to clean 'ora.oc4j' on node1
CRS-2681: Clean of 'ora.oc4j' on 'node1' succeeded
CRS-4000: Command Start failed, or completed with errors. [oracle:]/u01/app/grid/11.2.0.4/bin > ./crsctl start res ora.oc4j -n node2
CRS-2672: Attempting to start 'ora.oc4j' on 'node2'
CRS-2676: Start of 'ora.oc4j' on 'node2' succeeded

Please follow Metalink Note 1050908.1.
This might help
Cheers
FJFranken

Oracle 11g installation fails

Hello All,
I am trying to install Oracle 11g R2 in Cent OS 6 , when i try to install i get the following error message and the installation fails.Can any body help with this issue.
Exception in thread "main" java.lang.UnsatisfiedLinkError:
/tmp/OraInstall2011-07-24_11-16-24AM/jdk/jre/lib/i386/xawt/libmawt.so:
libXext.so.6: cannot open shared object file: No such file or
directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647)
at java.lang.Runtime.load0(Runtime.java:769)
at java.lang.System.load(System.java:968)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:993)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1509)
at java.awt.Toolkit.<clinit>(Toolkit.java:1530)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

Hello;
I used several versions on Linux but not that one.
That said the error :
libXext.so.6: cannot open shared object file: No such file or directoryResolution : Install the libXp package
So you are missing at least one of the "extra" packages needed for an Oracle install.
I found some posts that make me believe Cent 6 isn't quite ready for Oracle 11 :
http://www.centos.org/modules/newbb/viewtopic.php?topic_id=32128&forum=55&post_id=137271
http://sfentona.net/wiki/index.php?title=How_to_install_Oracle_11gR2_on_CentOS_5.5
Best Regards
mseberg

Oracle 12 post-installation fails-http server not coming up

Apps dba;
We did a fresh installation of the Oracle E-biz 12 on our Linux (2.6.967.0.4.ELsmp).
The scenario is like this:
1) two nodes, db and cm on one node, the web sever and form on the other node
2) The db and cm node installation is successful.
3) After install the web and form node, the post-installation fails. The HTTP and JSP and Login page tests failed.
If I do adapcctl.sh status
I got the following :
Processes in Instance: MDMQ_tus1mdmwebqin01.tus1mdmwebqin01.ges.symantec.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
OC4J | oafm | 26971 | Alive
OC4J | forms | 26870 | Alive
OC4J | oacore | 26745 | Alive
HTTP_Server | HTTP_Server | 26707 | Stop
ASG | ASG | N/A | Down
Check the log of opmn and http, it shows the error
/apps/applmgr/inst/apps/MDMQ_tus1mdmwebqin01/ora/10.1.3/Apache/Apache/bin/apachectl hardstop: httpd
(no pid file) not running
Please help wit troubleshooting this.
Thanks,
Lily

Thanks for reply.
If i follow the note,
do the dcmctl, i got the error, the required file is not existing.
tus1mdmwebqin01[appmdmq]:$dcmctl updateconfig -force
ADMN-100001
Error initializing oracle.ias.sysmgmt.utility.RepositoryContext.
Resolution:
Please make sure the file is in the correct location.
Base Exception:
java.io.FileNotFoundException
/apps/applmgr/inst/apps/MDMQ_tus1mdmwebqin01/ora/10.1.2/dcm/config/sysmgmtProperties.dtd (No such file or directory)
java.io.FileNotFoundException: /apps/applmgr/inst/apps/MDMQ_tus1mdmwebqin01/ora/10.1.2/dcm/config/sysmgmtProperties.dtd (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at oracle.ias.sysmgmt.utility.RepositoryContext.<init>(Unknown Source)
at oracle.ias.sysmgmt.utility.RepositoryContext.getInstance(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.checkInit(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)

Oracle Enterprise Repository post installation steps failed.

Hi,
I was able to install Oracle 11g Express and Weblogic 10.3.6.0 and 11.1.1.6.0 and when try to follow post installation steps to extend a domain installation fails with following steps. Could you please assist me
what could i have done wrong or suggest me hints to locate the error.
2013-01-30 23:08:04,768 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
2013-01-30 23:08:11,830 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.6.0 [C:\Oracle\Middleware\wlserver_10.3\common\templates\domains\wls.jar]
2013-01-30 23:08:15,362 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2013-01-30 23:08:15,471 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.6.0
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.6.0 to WebLogic_Server_10.3.6.0_wlserver_10.3_ORACLE_HOME
2013-01-30 23:08:27,096 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
2013-01-30 23:08:28,737 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2013-01-30 23:08:32,580 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
Traceback (innermost last):
(no code object) at line 0
SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
 at org.python.core.parser.fixParseError(Unknown Source)
 at org.python.core.parser.parse(Unknown Source)
 at org.python.core.Py.compile_flags(Unknown Source)
 at org.python.util.PythonInterpreter.execfile(Unknown Source)
 at org.python.util.PythonInterpreter.execfile(Unknown Source)
 at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1574)
 at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
 at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
 at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
 at com.oracle.cie.domain.TemplateImporter.generate(TemplateImporter.java:274)
 at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
Thanks
Edited by: 985275 on Jan 31, 2013 12:13 AM

Hi,
After installing Oracle DB, did you Install RCU setup succesfully??
If not, Install RCU and then procced.
-Santosh

Oracle CRS(10.1) installation fails

Similar Messages

Maybe you are looking for