ORACLE Crystal Report Error
Hi All
i am using Weakly Bound REF CURSOR to load data to crystal report (getting data from SP)
when i am adding SP to the report it will prompt a massage as follows
ORA-00000: normal, successful completion
Help me to over come this
I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
export ORACLE_SID=summitdb
export ORACLE_HOME='/usr/lib/oracle/11.2/client'
export ORACLE_BASE='/usr/lib/oracle/'
export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
export PATH="$:/usr/lib/oracle/11.2/client/bin"
export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.
Similar Messages
-
Crystal report error on Target Machine
We have to provide application exe to our clients. The application is developed in Visual Studio.Net 2010 and by using SAP crystal report CRforVS_13_0. Client must be able to fire reports on their target machine on which the Dot Net framework and u201CCRforVS_redist_install_64bit_13_0_1u201C run time utility is installed. But it gives a crystal report error on the target machine.
Our development and target machines have Win 7 Professional, 64-bit OS installed.
Kindly provide us with an appropriate run time version for target machine in order to fire reports or any other solution in order to make our project work on target machine.
Thanks!Thanks a lot Don for your valuable suggestions.
We have already taken care of the points which you mentioned in your reply on development side. Also, we have downloaded crystal report from the link which you posted but on DEPLOYMENT side we are unable to run reports from our application.
It gives the notification when we try to install crystal report on a target machine as "You must have visual studio 2010 installed in order to install the crystal report".
The DEPLOYMENT problem we are facing is in RUNTIME environment on TARGET machine. Our TRAGET machine has properly installed Win 7 Professional 64 bit, .NET Framework Ver 4 and CRforVS_redist_install_64bit_13_0_1 . We also have properly installed application on this machine. We got no errors while installing any of the above. The problem starts when we fire a report on target machine from the application.
We get the error as "The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception"
So, we are looking for an appropriate RUN TIME version of Crystal Report which can be installed on the target machine to fire reports (where visual studio 2010 is not installed).
Please help suggest an exact version to download for target machine and the steps if it has a specific procedure.
Thank you!
Ruchir -
Crystal Reports Error - BOBJ is undefined
Post Author: cstent
CA Forum: Crystal Reports
Hi
I recently upgraded from crystal reports 10 to 12 and am now coming accross an error when i try and deploy a crystal report viewer onto a webpage.
Im getting a javascript page error "'bobj' is undefined".
Searching on the web i can only find one other person who has come accross this error, and not posted the solution.
Any ideas?Crystal Reports Error - BOBJ is indefinido
hola para los que no Leen inglés.
este error se dió cuando quise ejecutar el reporte en formato HTML.
las causas son estas, cuano se instala el runtime solo se instala en C:Inetpubwwwrootaspnet_clientsystem_web2_0_50727
alli dentro tiene los formularios, y el javascript para que se ejecute el reporte en html (todo el viewer).
cuando quise ejecutar el reporte tengo otra ruta que se llama c:Inetpubwwwpruebasaspnet_clientsystem_web y me marcaba el error, eso es porque los scripts no se encontraban en esa ruta.
PARA RESOLVERLO solo copiar el system web de wwwroot y pegarlo en la otra ruta. con eso solucionan el problema.
saludos desde MTY Mex. -
Crystal Report Error while doing Email Billing
After emailing approx. 497 invoices utilizing MS Dynamics, we are getting the following errors; In addition, we have to respond to numerous printing prompts presented by Crystal Report, v11.
Error in ASI_SEND_MAIL_WITH_Outlook.
Error: Object require error number: 424
Error in ASI_OpenReport.
Error: Invalid TLV record.
Error Number: -2147206429
What is causing the program to abort with the above Crystal Report errors?Hello,
This may be caused by load. Where one report is not complete before the next one is called.
It would be difficult to determine without having access to the source code.
The trouble-shooting should be done by MS Dynamics since it is coming from inside their application and they can involve Business Objects if they have questions.
Elaine -
I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
export ORACLE_SID=summitdb
export ORACLE_HOME='/usr/lib/oracle/11.2/client'
export ORACLE_BASE='/usr/lib/oracle/'
export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
export PATH="$:/usr/lib/oracle/11.2/client/bin"
export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine. -
Oracle - crystal report problem
Hi,
I have a package with few functions in it that returns certain values like name, address, state and zip
But while I am passing these valus to get the result on the crystal report viewer on a web browser, I am not getting any special characters like dashes, commas, parenthesis...ends up in error..
For example
lets say u have a function named 'address' returning something like "123 my address, NY 10001" (COMMA is the problem here)
I am trying to pass these values to the Crystal Report on the web thru input tag and found that I can only get up tp "123 my address".... the rest is being ignored.
HTP.p ('<input type="hidden" name=promptex-p_address@subreport value=" ' || address || ' ">' );
But when I removed the comma, its passing everything
Please help....and sorry if I am in the wrong section of the forum
SanThanks jim. I tried my best I can. Well I disabled the crystal report plugin for the web browser and tried to see the output and the entire returned value from the function is showing up...
But somehow when it processed inside crystal, its(comma) getting ignore with the rest of the line no matter what u do with the input
I am started to thinking like this is kind of a bug. But its my 2 cent thinking, if u guys have any suggestions please post it....
I know this is not a place for typical crystal report discussion area, but I posted it because oracle products are also involved in this matter
Thanks...
san -
Crystal report Error for CRVS2010 sp2 using Push Method
I am trying to pass a dataset to a crystal report viewer using SetDatabaseSource.
I have defined in Crystal to used an ADO .Net Database XML Schema.
I pass a Dataset to the Report By using SetDatbaseSourece and set the ReportSource for the CrystalViewer but I get the error that crdb_adoplus.dll does not exists.
Note that Crystal is looking for crdb_adoplus.dll under subdirectory dotnet1. It resides under win32_x86.
Is this a Crystal Report Problem ?
Is their any docuentation that show how to program for ADO xml dataset using crvs2010 ?
The Error Reads
System.IO.FileNotFoundException was unhandled
Message=Could not load file or assembly 'file:///C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. The system cannot find the file specified.
Source=mscorlib
FileName=file:///C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll
FusionLog==== Pre-bind state information ===
LOG: User = WKST04\GARYB
LOG: Where-ref bind. Location = C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll
LOG: Appbase = file:///D:/S_and_G/LMS_DotNet/LMS_Solution/LMS/bin/Debug/
LOG: Initial PrivatePath = NULL
Calling assembly : (Unknown).
===
LOG: This bind starts in LoadFrom load context.
WRN: Native image will not be probed in LoadFrom context. Native image will only be probed in default load context, like with Assembly.Load().
LOG: Using application configuration file: D:\S_and_G\LMS_DotNet\LMS_Solution\LMS\bin\Debug\LMS.vshost.exe.Config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Attempting download of new URL file:///C:/Program Files (x86)/SAP BusinessObjects/Crystal Reports for .NET Framework 4.0/Common/SAP BusinessObjects Enterprise XI 4.0/win32_x86/dotnet1/crdb_adoplus.dll.
StackTrace:
at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at CrystalDecisions.ReportAppServer.DataSetConversion.DataSetConverter.DataSetProcessingDelegate(IntPtr arg)
InnerException:Microsoft Visual Studio 2010 Version 10.0.40219.1 SP1Rel
Crystal Reports for .NET Framework 4.0 (CRforVS_13_0_2)
project WPF net 4.0
crReport = new Reports.Buh.Cma.cr_balances_cma_move();
using (DataTable tbl = new DataTable())
using (SqlConnection cn = new SqlConnection(ConnectToDataBase.GetSqlConnectionString()))
using (SqlCommand cmd = cn.CreateCommand())
cmd.CommandText = "proc_name";
cmd.CommandType = CommandType.StoredProcedure;
using (SqlDataAdapter da = new SqlDataAdapter(cmd))
cn.Open();
da.Fill(tbl);
crReport.SetDataSource(tbl);
crReport.SetParameterValue(4, param["report_name"]);
myDateTime.GetServerDate();
crReport.SummaryInfo.ReportAuthor = App.GetPrintInfo();
e.Result = crReport;
erorr_message - Could not load file or assembly 'file:///C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. Не удается найти указанный файл.
help plz -
Crystal Report Error - Mobile Sales - 4.0 SP 12
Some of the users are getting the following error message while trying to open the Crystal Reports from Mobile Sales.
"This program is used to host and to initialize the UF F has encountered a problem and needs to close. We are sorry for the inconvenience."
Can you please let me know where can I find any update about these issues?
Has anyone ever come across this type of error?
Thanks in advance.
Regards,
PijushHi Pijush,
Can you ensure that the following Dlls in the machine are registered:
1. Register all the Dlls and ocx files available in
<<Installation directory>>\Sap\Mobile\bin directory.
2. Register the dlls and ocx files available in
<<Installation directory>>\Sap\Mobile\3rd_party directory.
3. Register the sfabol.dll and msa.dll. It will be available under
<<Installation directory>>\Sap\Mobile (or in the sub-directories
based on how settings are at your end.
But before doing the same, please ensure that you unregister the other Dll first.
As you are aware, the starting application is UFContainer.exe. The same
requires the following Dlls/OCX to be registered:
1. sfabof.dll
2. scrrun.dll in C:\winnt\system32 directory
3. ErrComp.dll
4. UFCore.dll (based on the IE Version)
5. ACTBAR.OCX
6. MSCOMCT2.OCX
7. comdlg32.ocx
8. SSLSTBAR.ocx
9. MSCOMCTL.ocx
Can you please ensure that the above are indeed registered in your case
Some of the above exists in C:\winnt\system32 directory.
If the problem remains it may be because of the IE version you use. Do you use IE7? iIf so did you face the same problems with IE 6 also?
Regards,
Gervase -
I have linked my first Crystal report into SAP (2007A), but when I try to run it I get an error.
Msg header "SAP Crystal AddOn"....Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
I searched the SAP forums, but found nothing regarding this error. Anybody have an idea how to fix? I can't see my Crystal report. Does the report need to be stored in a specific location for it to be called from SAP? I was able to browse to it when I setup the link in SAP.
Edited by: shredder on Nov 17, 2009 11:52 PMHi Shredder ,
Actually you should have posted in reporting and printing forum ..anyway close your previous thread too..
and please take a look at this
*I copy from the other thread *
Client you need to install .net framework 3.5 and Crystal Run time to run reports.
in the client make sure the shared directory is accessible from run without any password
and in the add on go to report properties and set the path to the shared folder .rpt files and apply changes
use OLE DB connection
CRYSTAL REPORTS 2008 V1 FOR B1
(click on Installation)
https://websmp208.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=01200314690900002156&V=INST
Crystal Reports Integration for SAP Business One
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/707f51b3-0b20-2b10-8daa-d8ee72ace309 [original link is broken]
in case you have any problem installation go through the demo and make sure you have installed correctly
https://websmp201.sap-ag.de/~sapidp/011000358700000727712008E.htm
Hope this helps
Bishal -
hi,
i'm using crystal reports 11 in java, while calling that in tomcat server the following error is occured.
javax.servlet.ServletException: Can't find bundle for base name crystalreportviewer, locale en_US
byeDouble post
http://forum.java.sun.com/thread.jspa?threadID=681292&messageID=3971174#3971174 -
Crystal report error (The table '' could not be found)
Dear Expert,
As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
Using the 'Crystal reports for SAP B1', they already view the report.
But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
Thanks in advance for any help.Hi ,
We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
Best regards,
Jadie -
Crystal Report Error Failed to load Database logon Information
Hi Experts,
We developed a Crystal reports fetching data from a BI Query. When we run the report from Crystal Report Desginer it runs perfectly.
When I schedule the report in the CMC / Infoview, I am getting a error message saying:
"<REPORT NAME> Failed to load database logon Information."
We have checked the database configuration in CMC for this report. BI system hostname and the other necessary credentials are fine.
Please suggest us on how we go about understanding the cause of the error.
Crystal Reports 2008 SP2
OS --> AIX
Best Regards,
Suchindra.Moved to SAP Integration kit forum
-
Crystal Report: Error while Export to Excel
We are using combination of Crystal Report 10 With
J2EE, Below source code is working fine While
exporting to PDF, MSWord, RTF format.
if(selectedFormat.equals("MSWORD"))
exportOptions.setExportFormatType(ReportExportFormat.MSWord);
if(iPageFrom>0 && iPageTo>0)
RTFWordExportFormatOptions RTFExpOpts=new
RTFWordExportFormatOptions();
RTFExpOpts.setStartPageNumber(iPageFrom);
RTFExpOpts.setEndPageNumber(iPageTo);
exportOptions.setFormatOptions(RTFExpOpts);
But am getting following error while exporting report
to Excel
com.crystaldecisions.report.web.viewer.ReportExportControl
Invalid post back event : {0}
We would like to know, Is SDK feasible for exporting
to excel or not ?
If yes! then Please suggest us for same.
Thanks In advance :)I will make sure that I am on the latest patch ie SP4
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
You can find the rumtimes here:
MSI:
https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
ClickOnce
https://smpdl.sap-ag.de/~sapidp/012002523100008782442011E/cr2008sp4_clickonce.zip
Recompile the app and then deploy.
What is the .NET Framework used by the application?
Method of deployment?
OS where app is deployed, x86 or x64?
Are you able to export the report from designer ie CR2008 Standalone?
- Saurabh -
Crystal Report error - The Handle is invalid;
I get the error 'The handle is Invalid' when I try to print a crystal report that is opened in the Report viewer.
I was wondering if anyone has encountered this is has a solution.
The report was created using Crystal Report 2008 for SAP B1.
Regards
AlbertAlbert,
You may check those old threads first:
Embarrasing issue
Re: 5 : - The handle is invalid
Landscape test connection failure: The handle is invalid.
Thanks,
Gordon -
Crystal Report Error when Viewing in VB6
Post Author: aquiintac
CA Forum: General
I'm using crystal report and vb6. My first problem was how to change the data source location of the crystal report. I found away by using this: crxReport.Databases.SetDataSource rsReport
but I'm having an exception report : "The exception unknown software exception (0xe0434f4d) occurred in the application at location 0x77e55e02"The report shows for some time but after opening several reports the error message occurs.This is my scenario:"I'm using a udl for my connection. I have two databases namely TK and TK_MCC. TK is for other company and TK_MCC is for the subsidiary company. I used TK database when I created the crystal report. I used the setdatasource to pass the recordset to change the datasource location of the crystal report. So even if they change the database TK to TK_MCC they can still access the report. But when I did the setdatasource there was an exception report. (The exception unknown software exception (0xe0434f4d) occurred in the application at location 0x77e55e02)"Before it was working fine when I don't have to change the database. But when I used crxReport.Database.SetDataSource rsReport this error happened.By the way, i tried it also in another computer (just installed the program) but the error message was different. The other error was error28 out of stack space and sometimes the program closes by itself.Can someone help me on this...Thank you very much.Seems to be working now.
I upgraded CR and adobe.
Edited by: RolandWorms79 on Sep 7, 2009 10:52 AM
Maybe you are looking for
-
Apple Address Book no longer sync'ing with iPhone
I'm running Leopard Server 10.5.1. Address Book sync with my iPhone is no longer working properly. iTunes is getting Address Book information from someplace other than Address Book. This is what I did to test this theory: 1. deleted all contacts in A
-
How do I change the name that appears on my comments on the photo streaming?
When I first bought and configured my iphone 4, my husband used his name to create an apple account. I was able to change it most everywhere, but when I post a comment on a photo streaming it appears his name instead of mine. How do I fix it? When I
-
Clarification needed in calling synchronous bpel process from plsql
Hello all, I am trying to a bpel from the plsql function as given in the folowing link: http://orasoa.blogspot.com/2006/10/calling-bpel-process-from-raw-plsql.html I have a doubt that, what is: p_DefaultDetail ? and what is XMLTRANSFORM method here i
-
New macbook pro 15 screen issue (blue-ish)
hi just got a brand new mbp from apple store...got it friday everything is great but the screen is slightly on the blue tint side i tried the calibration but it only makes it worse i also downloaded all the updates from apple i'm going to an apple st
-
HT4623 I upgraded to iOS 7 but now have to reinstall printer.
I have upgraded my impasto ios7and did have a wireless printer installed and now have to reinstall? Is this correct?