Oracle Data Integrator - Real Time Integration

Hi,
I want to know that, is there any possibility of integrating data in real-time using Oracle Data Integrator?
If yes, does it affect the OLTP system performance? (Could it read from db logs,etc..)
Thanks..

Using ODI with Logminer-based CDC will affect performance on the source system more than using Oracle Goldengate, let me explain why:
When using the ODI Logminer-based Journalisation the Logminer functionality will move the primary-key of the affected row into the journal table. When you are then ready to move the changed data, running an interface to move the data reads the Journal-view, which joins the journal table (primary keys) to the source data (and dealing with deleted rows), optimising out duplicate rows in order to bring across the then-current state of the data, which can then be loaded into the target system, on completion, the moved rows can be removed from the journal table. The data will appear in the journal table as soon as Logminer puts it there, which may be a lag of up to two minutes using asynchronous setting, whereas Synchronous Logminer applies "system triggers to the table, with the consequent overhead.
With Oracle Goldengate, the comitted transactions are read from the log as soon as the log-writer puts the commit into the log. All the data is picked up from the log, at that point. It is then written to the trail-file system of Oracle Goldengate which can be propogated to multiple other systems potentially with sub-second latency, and minimal impact on the source system due to the efficient reading and writing mechanisms. One other consequence of using Oracle Goldengate is that you get every change of the data, not the optimised then-current state of the data when moved.
Hope this explanation helps.

Similar Messages

Real time Integration between Oracle i-Procurement with MUMPS based System

Folks,
Has anybody worked on integrating Oracle Applications with any Legacy System? I'm interested in discussing real time integration between Oracle i-Procurement and Legacy System. Can 9iAS Advanced Queue be used to accomplish this?
If anybody has any information on this topic please reply back or email me at [email protected]
Regards,
J Ali

Yes, we have experience with the product Oracle9iAS InterConnect. Adapters are provided to integrate with iProcurement and legacy systems. If your legacy system is non-standard either partners might already have adapters or you can use the adapter development kit to build your own specialized adapter. Check out: http://otn.oracle.com/products/integration/index.html
and I would suggest to contact your Oracle account manager to get a detailed product demonstration and references.

OK17 Real Time Integration

Hi
Reconciliation ledger is not active in OKKP. We are using New GL, Functional Area. Allocation cycles, order settlements will done.
If I do not use OK17 then what will be impact.
regards

Hi Imdad ,
The real-time integration replaces the reconciliation postings from the reconciliation ledger. Therefore, you do not need a reconciliation ledger if you are using OK17 ..
However, if you do not set the Reconciliation Ledger Active indicator for the controlling area (Controlling ® General Controlling ®Organization ® Maintain Controlling Area), you can no longer use the reports in report groups 5A* (5AA1-5AW1), since the reconciliation ledger is the data source for these reports. This applies to most reports under Accounting ® Controlling ® Cost Element Accounting ® Information System ® Reports for Cost Element Accounting/Revenue Element Accounting. Instead, you can use the report Cost Elements: Breakdown by Company Code under Reports for Cost Element Accounting/Revenue Element Accounting ® Overview. You can also create further reports in report group 5A21.
Check this link for concept of Recon Ledger .... In New GL.. i think OK17 is right .. no need to Recon Ledger ..
http://help.sap.com/saphelp_erp2004/helpdata/en/66/bc7fd143c211d182b30000e829fbfe/frameset.htm
Regards
Sarada

Defining Account Determination for Real-Time Integr

Dear all,
I haven't understood yet about Account determination for the real-time integration of Controlling (CO) with Financial Accounting (FI).
Please tell accounting process that use this account. And give me a detail example.
Thanks so much
Minhtb

Hello
This is the new feature in New GL accounting
During allocations in Controlling, most of the postings created do not affect Financial Accounting. These postings do not update any G/L account transaction figures; they are postings within Controlling. If, however, an allocation in Controlling leads to a change in the functional area or any other characteristic (such as Profit Center or Segment) that is relevant for evaluations in Financial Accounting, a shift occurs between the affected items in the profit and loss statement. For this reason, this information has to be transferred to Financial Accounting. This reconciliation between Controlling and Financial Accounting takes place by means of real-time integration.
As a result of real-time integration, all Controlling documents that are relevant for General Ledger Accounting are transferred from Controlling to General Ledger Accounting in real time. This means that Financial Accounting is always reconciled with Controlling.
A document is created in Financial Accounting for each posting in Controlling. This means that the detailed information contained in the CO documents is always available in reports in New General Ledger Accounting. This information can be sorted by the following, for example:
●     Functional area
●     Cost center
●     Internal order
Real-time integration replaces the reconciliation postings from the reconciliation ledger. Consequently, you do not need a reconciliation ledger.
If, however, you do not set the Reconciliation Ledger Active indicator in Customizing for the controlling area, you cannot use the reports belonging to report groups 5A* (5AA1-5AW1). You set this indicator in Customizing for Controlling under General Controlling ® Organization ® Maintain Controlling Area. The reconciliation ledger serves as the data source for reports belonging to the report groups 5A*. You find these reports in the SAP Easy Access menu under Accounting ® Controlling ® Cost Element Accounting ® Information System ® Reports for Cost and Revenue Element Accounting.
Replacement reports are available as follows:
●     You find the reports in the SAP Easy Access menu under Accounting ® Controlling ® Cost Element Accounting ® Information System ® Reports for Cost and Revenue Element Accounting (New).
●     You can create additional reports in report group 5A21. You can assign the report group to any drilldown report of New General Ledger Accounting using the report-report interface.
●     From the report Financial Statements Actual/Actual Comparison, you can call up the report Cost Elements: Breakdown by Company Code. You find the report Financial Statement: Actual/Actual Comparison in the SAP Easy Access menu under Accounting ® Financial Accounting ® General Ledger ® Information System ® General Ledger Reports (New) ® Balance Sheet/Profit and Loss Statement/Cash Flow ® General ® Actual/Actual Comparisons.
You can define account determination for each controlling area. You do this in Customizing for Financial Accounting (New) under Financial Accounting Global Settings (New) ® Ledgers ® Real-Time Integration of Controlling with Financial Accounting ® Account Determination for Real-Time Integration. In this way, you use the same account determination as for the reconciliation ledger (transaction OK17). You can then use the reconciliation ledger reports to compare FI balances with CO balances.
Prerequisites
If you use real-time integration in at least one company code, you need to have activated company code validation for the related controlling area. You do this in Customizing for Controlling under General Controlling ® Organization ® Maintain Controlling Area ® Activate Components/Control Indicators. Otherwise, the reconciliation between Financial Accounting and Controlling at company code level is not possible.
In Customizing for Financial Accounting (New), you have processed the IMG activities under Financial Accounting Global Settings (New) ® Ledgers ® Real-Time Integration of Controlling with Financial Accounting.
Activate real-time integration for all company codes between which you want to make CO-internal allocations.
In the IMG activity Define Variants for Real-Time Integration, do not select all CO line items for transfer. If the same line items are to be transferred as through the reconciliation posting from the reconciliation ledger, select the following line items:
●      Cross-Company Code
●      Cross-Business Area
●      Cross-Functional Area
●      Cross-Fund (if you use Public Sector Management)
●      Cross-Grant (if you use Public Sector Management)
Features
Value flows within Controlling that are relevant for General Ledger Accounting such as assessments, distributions, confirmations, and CO-internal settlements are transferred immediately. The FI documents are posted with the business transaction COFI. They contain the number of the CO document. This means that you can call up the CO document from the FI document, and vice versa.
Activities
If a document could not be transferred because the posting period was blocked in Financial Accounting or no account was found, for example, the document is included in a postprocessing worklist. You need to check this worklist regularly and process any documents in it. From the SAP Easy Access menu, choose Accounting ® Financial Accounting ® General Ledger ® Corrections ®Post CO Documents to FI.
Example
An internal order for business area 0001 is settled to a cost center of business area 0002. The document from this allocation is transferred in real time to Financial Accounting.
Reg
assign points if useful

New General Ledger - Real Time Integration CO-FI

Running Real Time Integration with Account Substitution.
Works well when using a constant for RCL_ICCF-ACCOUNT.
Does not work when calling an exit to substitue a value for the same field.
Any clue ? Thx.
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 2:06 PM

Declaration of table RCL_ICCF has to be global and not ocal.

Real-Time Integration is activated but no posting made in FI from KSV5

Hi
Real-Time Integration of Controlling with Financial Accounting is activated but when we do KSV5 - Distribution Run system is not creating FI document for that. but properly posting CO document.
If i do KB41N - Enter Manual Posting, system create FI document. I dont understand why system is doing so.
Bittu

Dear All,
Any Input..
Bittu

Cross co. code controlling area - CO Real time integration with FI

Hi all of you,
We are in to New GL, and implementing one controlling area for all the company codes (cross company code cost accounting) with group currency "30". And my client requires the CO - FI Real time integration to take the segment reporting / profit center (new) FI reporting.
My basic doubt is, when we are implementing one CO area, we taking all the company codes as cost center groupings and creating the overhead cost centers. When doing Repost CO line items in CO, how system arrives the company code since we are not referring the FI document or Company code, how system will create the FI document in the company code.
Do we have any separate transaction to do the repost CO line items to hit the CO - FI real time integration?
Please give me your valuable suggestions to use the CO-FI real time integration with cross controlling area assigned to multiple company codes.
Thanks & Regards
Ramki

Thanks for your valuable reply Mr. Christian.
So you mean to say that, when we are maintaining the cost center groupings (per company code), same will be maintained for profit center and will be assigned to the individual company codes, right.
In CO - FI real time integration , I need to select the objects - company code and segment. Whenever any repost happened in the CO module, system will create one FI document referring to the real time objects. We have more than 12 company codes located in different countries. In this way, system is fulfilling the cross company code postings in CO and will generate the FI documents, right.
Please give me your valuable suggestion and when I am looking the note in Market place (91055), it is showing the CAD Interface.
Regards
Ramki
Edited by: Ramki on Feb 10, 2010 5:29 PM

Real Time Integration Document - Rounding Error between LC1 and LC2

Hi!
We recently underwent currency conversion. After the conversion, we noticed that Real Time Integration document that is generated due to Assessment Run (KSU5) produces a document which are off by cents between LC1 and LC2 ,even though both have the same currency
LC1 = EUR (Currency Type 10 - Company Code Currency)
LC2 = EUR (Currency Type 60 - Global Company Currency)
Document being generated
Document Currency = USD (Controlling Area Currency)
Account LC1 (EUR) LC2 (EUR)
XXX 2297.44 2297.43
Any help would be appreciated .

Hello Manish,
I am encountering the same issue. Have you found solution on this.
BR,
Zulfikar

FI CO Integation: Document type for real-time integration with FI not there

Dear Gurus,
This is the error message that I got and I am looking for a solution could anyone help me please.
I was doing simultaneous costing and doing Product Cost Collector reports.[KKBC_PKO]
This is IDES 6.00 ehancement package 4,
How do I define a document type for real-time integration with FI?
Message no. FAGL_COFI003
"Diagnosis: For CO documents to be transferred into Financial Accounting in company code 1000, -the system requires a document type".
How do I go about with this, need steps to resolve this please
Thank you
Saleem

Hi,
1. Check which variant is assigned to your company code '1000' using this IMG path
IMG->Financial Acctg (New)->Financial actg global settings (New) ->Real-Time integration of Controlling with Financial Actg ->Assign variants for Real-time Integration to Company codes.
2. Check if document type is assigned to the variant assigned to your Company code in this path:
IMG->Financial Acctg (New)->Financial actg global settings (New) ->Real-Time integration of Controlling with Financial Actg -> Define Variants for Real-Time Integration.
Hope this helps.

New GL - Real time integration of controlling with financial accounting

Hi,
What are the impacts of activating new GL in already existing system. I need to use the real time integration of CO to FI functionality in new GL only. Can i activate new GL for this function only?
Please advise
thanks

Hi
Yes, by activating New GL you would have real time integration of FI with CO and you dont need reconciliation ledger as available before.
More over at the document level itself the profit centers are written to the balance sheets accounts which was earlier done in the period end activities to transfer the profit centers to debtors and creditors etc., which is known as "Document Splitting".
You also need assign the various GL accounts and sceaniors in Controllingwhich needs to activated with Document splitting.
Regards,
Suraj

Real Time Integration CO-FI

Hi,
We have one plant with two different business (Energy/Telecom) to manage, mapped through the Segment field. We need to produce, for IFRS purposes, a P&L and a Balance Sheet by Energy and by Telecom.
We execute a CO Distribution Cycle to allocate Eletricity Cost from a "Dummy Plant" Cost Center to "Energy" Cost Center and "Telecom" Cost Center. In this case, changing the cost center, automatically, we assign another Profit Center/Segment. With CO Allocation (with PCA deactivated) we don't assign the new Profit Center in NewGL, so we need to use the Real Time Integration to reassign the right Profit Center/Segment in NewGL, but the system reassign in FI only the P&L accounts, taking the information from the CO document.
How can we reassign the BS accounts too?
Thanks
Stefano

Hi,
BS accounts can't be reassigned to CO only the P & L accounts.
In FI P&L Accounts is equal to Primary Cost Elements in CO.
regards
sel

Export journalized data in real time

Hello,
I must pull journalized data in real time out of Oracle DB source.
my package has ODIWaiForData operator and interface which triggers only in case of Journalized Data in my source table. Interface loads data to target Oracle table in real time and it works.
Is it possible to send Journalized Data out of Oracle database in real time? Maybe some insert/update statements within sql file, csv file or through ODIOSCommand operator somehow?
Regards

Hi,
did you already see about Logminer?
Cezar Santos
www.odiexperts.com

Read data in real time and save as an excel file

Hi,
I want to write a LabVIEW progarmme which able to read data in real time and save it as an excel file from Varian Vacuum muli-gauge.
It is using RS232 port.
Can anyone give me some examples or point me in the right direction?
I am a beginner of LabVIEW. Hope anyone can help me.
Thank you very much!!
Joanne

Thanks for your reply.
I just use MAX to verify that the rs232 port is operational.
However, there is an error (please refer to the attachment).
One possible reason is in MAX I am trying to do the default command *idn? ...but it doesn't work.
I read the vacuum multi-gauge manual but I don't know which command should I use...
I attached the manual and can you tell me which command should I use?
Or can you tell me other possible reason for this error code?
Thank you very much.
Joan
Attachments:
Varian Multi-Gauge Controller.pdf ‏2747 KB
error1.JPG ‏111 KB

Viewing data in real-time and saving on-demand - USB4000 Spectrometer

Hey,
I am trying to create a program with a USB4000 Fiber Optic Spectrometer to allow the user to view the data in real-time on the front-panel, yet to be implemented, and also be able to save the data to an excel datasheet, or if another format if more appropriate. I am reasonably new to LabVIEW and have limited experience with saving data to excel.
I am currently trying to build upon one of the example VIs given with the drivers. Currently the VI produces data like the following:
Wavelength (nm) Spectrum Data
xyz xyz
xyz xyz
xyz xyz
xyz xyz
I want my VI to continue to append to a new column every iteration but I think due to me inputting an array of dimension size 2 it can't but am unsure how to get around this?
The current VI starts off by creating the Headers and then appending to insert the spectrometer Data.
Any help would be much appreciated, apologies if I am unclear about anything.
Attachments:
USB4000 15-07-14.vi ‏18 KB

Ok, a couple comments. First, it is easier to build a 2D array by appending rows and then transposing the array before saving it. Also it is much more efficient to preallocate the array if you know how many columns the data is going to have.
Second, adding a new column or row isn't a problem because an additional column (or row) doesn't effect the number of dimensions.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Confirmation date in real time

Hi, Is it possible to set the confirmation date as real time date meaning, the system should accept prsent date confirmation only, not yesterday confirmation in CO11N screen. Pls advise how to set the same.

HI,
If you know the Exit name, go to transaction CMOD.
Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
Using Project management of SAP Enhancements, we want to create a project to enahance trasnaction CO11N
Go to transaction CMOD
Create a project called ZCO11N
Choose the Enhancement assign radio button and press the Change button.
Please check this links which will help you to know more detail on user exits.
http://sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://sap-img.com/abap/what-is-user-exits.htm
http://sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/4a/5b75387be80518e10000009b38f889/frameset.htm
Hope this will help.
Regards,
R.Brahmankar

Oracle Data Integrator - Real Time Integration

Similar Messages

Maybe you are looking for