Oracle Database 10g Express Edition and Forms 6i

Hello
Is it possible to combine those two in an application? I mean...can i make an application in Forms&Reports 6i with Oracle Database 10g Express Edition?
Sorry if that sounded silly but i didnt found a phrase on this subject on Oracle's forums
Thanks,
Oana

Hi,
yes, it will work, but only with the Western European Edition, not the Unicode release.
See this thread for details:
Re: Connection error from SqlPlus 8.0 to Oracle XE in the same computer
Regards,
~Dietmar.

Similar Messages

Problems with Oracle Database 10g Express Edition and JBoss

Hi all,
I try to use Oracle Database 10g Express Edition and JBoss, but sometimes i have a connection problems.
Sometimes i have starnge warning:
WARN [JBossManagedConnectionPool] Unable to fill pool
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
and:
org.jboss.util.NestedSQLException: Could not create connection; - nested throwable: (java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
Oracle Database 10g Express Edition support Distributed Transaction Processing (DTP) XA interface or not?
Some ideas?
Thanks in advance!
Stoyan

Hi,
yes, it will work, but only with the Western European Edition, not the Unicode release.
See this thread for details:
Re: Connection error from SqlPlus 8.0 to Oracle XE in the same computer
Regards,
~Dietmar.

Oracle Database 10g Express Edition and xmlelement

Hi
when i tried to execute the following Sql command on a Oracle Database 10g Express Edition
select level,xmlelement(evalname(desc), value1)
from hr.xml_local
connect by prior id = id - 1 start with level = 1
i got this error:
ORA-19039: The keyword EVALNAME is reserved for future use as a builtin function.
is there a workaround to avoid this?
MDK.

mdrake wrote:
Catch-22.. The other way of doing this easily is XQuery, but since in 10.2.0.1.0 XQuery had a dependancy on Java, and Java is not supported in XE we are back to square 1.
The only other ways are (a) string manipulation - which I refuse to discuss, or (b) DOM-APIOr Oracle Support providing the person with the relevant "alter session set events ..." statement to switch on that feature in 10.2.0.1 (as shown in the SQL and PL/SQL forum thread). Obviously as it's from Oracle support, it can't be supplied on the forums.
;)

Migration Oracle 9iR2 - Oracle Database 10g Express Edition, please, help

Good day!
Now I study examples from tutorial book "Oracle 9iR2 Data Warehousing"
(translated to Russian) written by Lilian Hobbs, Susan Hilson, Shilpa Lawande. However my Oracle is "Oracle Database 10g Express Edition" and ( as I thought ) for this reason I can't perform these examples.
Please, help me, if it no hard.
First example founded on using "Oracle Database Configuration Assistant"
and "Oracle Enterprise Manager Console". However, I not found them at
"Oracle Database 10g Express Edition".
Now I use only "Oracle Application Express" ( and SQL ). Please, tell me,
if "Application Express" has enough functionality with comparision to
"Oracle Database Configuration Assistant" and "Oracle Enterprise Manager Console"
and how I need to do ? (It must, because 10 > 9)
Second example founded on using SQL. First 80% SQL-commanfs of this executed succesfully. But command "CREATE TABLE easydw.purchases" has error message
"PARTITIONing is not available." Really, in "2 Day Developer Guide"
(SQL Reserved Words ) PARTITION is not exist.
Can I CREATE TABLE easydw.purchases by "Oracle Database 10g Express Edition"
(with PARTITIONing by other means of SQL )?
There is full text of this SQL-Command:
CREATE TABLE easydw.purchases
(product_id varchar2(8)
constraint not_null_product_id NOT NULL
constraint fk_product_id
REFERENCES product(product_id),
time_key date
constraint not_null_time NOT NULL
constraint fk_time
REFERENCES time(time_key),
customer_id varchar2(10)
constraint not_null_customer_id NOT NULL
constraint fk_customer_id
REFERENCES customer(customer_id),
purchase_date date,
purchase_time number(4,0),
purchase_price number(6,2),
shipping_charge number (5,2),
today_special_offer varchar2(1)
constraint special_offer
CHECK (today_special_offer IN ('Y','N')) )
PARTITION by RANGE (time_key )
partition purchases_jan2002
values less than (TO_DATE('01-02-2002', 'DD-MM-YYYY'))
pctfree 0 pctused 99
storage (initial 64k next 16k pctincrease 0)
tablespace purchases_jan2002,
partition purchases_feb2002
values less than (TO_DATE('01-03-2002', 'DD-MM-YYYY'))
pctfree 0 pctused 99
storage (initial 64k next 16k pctincrease 0)
tablespace purchases_feb2002,
partition purchases_mar2002
values less than (TO_DATE('01-04-2002', 'DD-MM-YYYY'))
pctfree 0 pctused 99
storage (initial 64k next 16k pctincrease 0)
tablespace purchasee_mar2002 );
Naturally, I also shall continue try find solution.
Winni.

Winni,
Partitioning is only available with Oracle Enterprise Edition.
Here is a list of features by edition:
http://www.oracle.com/database/product_editions.html
DBCA is not needed with Express edition because you can only have one XE database per server, and all options are pre-configured.
Enterprise Manager Console is not included with XE - only with the other editions.
You can get most of the functionality through SQL, Application Express and SQL Developer.

Connecting form 6i to oracle database 10G express edition

I am unable to connect forms 6i to oracle database 10G express edition.
form builder closes without any message.

Hi, i was try that solution, but have some problem.
1) I have stopped other database (Oracle 8i, OracleService + Listener), none Oracle service was running.
2) I was install Oracle XE Univ.
3) Run sqlplus from XE
"D:\oraclexe\app\oracle\product\10.2.0\server\BIN>sqlplus system/PASSWORD@xe as sysdba"
4) Shutdown immediate - OK
5) Startup mount - failed
SQL> startup mount
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
6) I was check registry "hkey_local_machine\software\oracle" and delete key "local" (walue was set to connection to 8i database).
7) I was checking status of Listener from XE (after shutdown).
"Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jacek)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully"
Have anyone suggestion how to connect "directly" to XE (without @CONNECTION string) ?
If source of problem can be having DB 8i installed on same machine ?
BBye.

Can Oracle Database 10g and Oracle Database 10g Express Edition co-exist ?

I just installed Oracle Database 10g Express Edition. But I also want to access isql*plus for study purposes.
Can I download/install Oracle Database 10g without removing Oracle Database 10g Express Edition ?

I decided to download and install Oracle 10g myself and it was pretty quick to install. So I answered my own question : Oracle 10g Express is definitely able to co-exist with Oracle 10g no problem.
I want to post/share this answer for others who started with Oracle 10g express first - the journey I started.
The url isql*plus is displayed near the end of the installation together with the enterprise manager url. Pretty cool.
Now I can learn both Oracle 10g enterprise edition and Oracle 10g Express which is based on apex engine.

Oracle Database 10g Express Edition Beta 2 Installation

Oracle Database 10g Express Edition Beta 2 Release for Microsoft Windows installation successful, no problems.

Hi Rekha,
The format mask 999G999G999G999G990D0000 is the format mask that I selected from the software itself. I also use this format mask for a single record update. If' s ok, no error, but with tabular form with multiple record update, it shows error .I also changed the decimal point to two digits ,select from software pop-up window (this was tested in the workspace provide by Oracle). It still shows error. Last test I put the space like 1 111,111.00 in a single record update it shows error (but if I put 1 in front of 111,111 without space it's ok-no space before). My point is from user point of view.In the first time user input 100000 the software accept it. Opp! it has to be 1100000. The user comes back after submit and put 1 without comma.It shows error (in tabular form with multiple record update not in single row update). While in the first time the user do not to key any comma at all. This may makes some confuses both the users and the developers which had to check error by adding program to checking some where in Page Processing or Page Rendering.
Thanks
Tritep

Dowload oracle Database 10g Expression Edition

Hi im Keli
i tried many times to dowload the oracle Database 10g Expression Edition for linux but i couldn't
can someone give the the way to do it properly ?
thank for your help

What steps have you taken? (include links, responses and errors)
What connectivity do you have? (indicate modem, DSL/Cable, reliable link, link speed, perhaps even country of origin would be useful)
I regularily download and install new copies. Almost always with some form of high speed connection and I never had a problem. Therefore I conclude there is a concern about your connection or your process.
Answering the above questions in detail would be useful. (Missing detail is somewhat like saying "I can not start my car. What is wrong?")

Problem upgrading Apex 2.1 to 3.2.1 in Oracle Database 10g Express Edition

G'Day Apex gurus,
I installed Oracle Database 10g Express edition in my Windows XP PC which comes with Apex 2.1 with no problems. Then I wanted to upgrade Apex 2.1 to 3.2.1 (Currently Apex download in OTN) following the document below:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
I went to the steps:
@apexins SYSAUX SYSAUX TEMP /i/
Then to change the password for the admin account run apxchpwd.sql and when prompted enter a password for the ADMIN account.
@apxchpwd
with not problems
Then I connected to SQL*Plus as SYS by:
sqlplus /nolog
CONNECT SYS as SYSDBA
Enter password: xxxxxxxxxxx
but when I tried to run:
@APEX_HOME/apex/apxldimg.sql APEX_HOME
where APEX_HOME is Apex3.2.1 in my case
SQL> @Apex3.2.1/apex/apxldimg.sql Apex3.2.1 (I get the messages below)
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'Apex3.2.1/apex/images'
Directory created.
declare
*+
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the path specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at line 15
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.17
Directory dropped.
Can anyone help me in how to trouble shout this?
I tried to continue by following the steps document
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
but when I tried to login in:
http://localhost:8080/apex/f?p=4550:1
when I type the credentials
system
system
systempassword
nothing happens
or even If I try:
http://localhost:8080/apex/f?p=4550:10
admin
adminpassword
nothing happens here too.
I appreciate any help
Kind regards
Carlos

My database version is 10.2.0.1.0 Oracle express.
Operating system is Windows Vista.
I started installing using the following commands.
@ C:\temp\apex\apexins.sql
it prompts me for the values of sysaux sysaux temp and c:\temp\apex\images\
If I supply the value for images the sqlplus window closes after scrolling a lot of info.
Enroute it also prompts me for a value for 9:
I don't know what the input shall be.
Then it again stops at enter value for version:
I used 3.2.1.0
The window scrols a while and closes.
later I changed the password and ran the command.
@c:\temp\apex\apxldimg.sql c:\temp
but no success with installation.
the output is as following.
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Nov 27 18:13:43 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect system/sairam as sysdba;
Connected.
SQL> @ c:\temp\apex\apxchpwd
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
wwv_flow_security.g_security_group_id := 10;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
ORA-06550: line 4, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 4, column 5:
PL/SQL: Statement ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 8, column 23:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 7, column 15:
PL/SQL: SQL Statement ignored
ORA-06550: line 13, column 32:
PLS-00364: loop index variable 'C1' use is invalid
ORA-06550: line 12, column 9:
PL/SQL: Statement ignored
ORA-06550: line 19, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 19, column 5:
PL/SQL: Statement ignored
Commit complete.
SQL> @c:\temp\apex\apxldimg.sql c:\temp
PL/SQL procedure successfully completed.
Directory created.
if wwv_flow_utilities.db_version_is_at_least('11') then
ERROR at line 32:
ORA-06550: line 32, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 32, column 3:
PL/SQL: Statement ignored
PL/SQL procedure successfully completed.
if wwv_flow_utilities.db_version_is_at_least('11') then --11g only
ERROR at line 16:
ORA-06550: line 16, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 16, column 3:
PL/SQL: Statement ignored
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.32
Directory dropped.
SQL>
Does this require XE 11 or anything else.
This will happen even if I supply as following(closing of sqlplus in the begining).
@ C:\temp\apex\apexins.sql sysaux sysaux temp c:\temp\apex\images\
Any help.

Can't succesfully install Oracle Database 10g Express Edition on Ubuntu

Hi,
I've been trying to install Oracle Database 10g xe on Ubuntu 10.04 and when I execute the .deb package (oracle-xe-universal_10.2.0.1-1.0_i386.deb) I get a quick installation that doesn't ask me for any configuration settings. When the installation is finished I don't get any menu in my Applications menu named "Oracle Database 10g Express Edition" as specified in Getting Started Guide (I only get some items grouped into an category called "Other" (Backup Database, Get Started, Get Started With Oracle Database 10g Express Edition, Go To Online Forum, Read Documentation, Read Online Help, Register For Online Forum, Restore Database, Run SQL Command Line, Start Database and Stop Database). As a consequence I can't access the Oracle Database Home Page.
In addition when I click on Start Database I get the following message: "Operation failed. josep is not member of 'dba' group".
I've tried to re-download the packages and to configure it by editing /etc/init.d/oracle-xe but this doesn't solve my problem.
can you give me some help?
Thabk you in advance!

Markus Waldorf wrote:
Did you run the post-installation?
$ sudo /etc/init.d/oracle-xe configureYes I've done it but it doesn't seem to work...

[Oracle Database 10g Express Edition] Don't UP

Hi,
I've installed the "Oracle Database 10g Express Edition" in my laptop, ThinkPad T60. The installation finish fine or I think that.
In the event viewer I don't see any error.
But I cant sing on in SQL/PLUS and I can't go to web config. All services are up.
The erro when i conect by SQL PLUS are:
SQL> connect system/PASSWORD as sysdba
ERROR:
ORA-12560: TNS:error del adaptador de protocolo
SQL> connect system/PASSWORD@localhost as sysdba
ERROR:
ORA-12514: TNS:el listener no conoce actualmente el servicio solicitado en el
descriptor de conexión
I cant found the error becose It happens.
I uninstall the database, erase the registry of Windows and Install again. But nothing success. I uninstall again, erase the registry, download again from www.oracle.com all continuous one equally.
Thanks for all!

SQL*Plus: Release 10.2.0.1.0 - Production on Vie Oct 20 14:47:04 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect / as sysdba
Conectado a una instancia inactiva.
SQL> connect sys/PASSWORD@localhost as sysdba
ERROR:
ORA-12514: TNS:el listener no conoce actualmente el servicio solicitado en el
descriptor de conexi¾n
Advertencia: íYa no estß conectado a ORACLE!
SQL>
The Services are UP.
The name of enviourment varible is oracle_sid but the value is?
In My PC --> Propierties ---> Advanced Option ---> Enviorurment variable
System or User?
Thanks an i waiting for your help

Oracle Database 10g Express Edition (Oracle Database XE)/ BI Publisher

Hi,
I have installed Oracle Database 10g Express Edition (Oracle Database XE) on my windows machine and would like to work with BI publisher for reporting in APEX applications.
Question: Can I install and work with BI publisher on ORACLE DATABASE XE?
If not any other options available?
Appreciate any help.
Thanks,
Lakshmi

hi,
yes you can install.. try
Oracle Discoverer 10g (Oracle BI Suite Standard Edition)
regards,
Deepak

UTF support in XML DB at Oracle Database 10g Express Edition Beta 2

hello everybidy! ;)
I use Oracle Database 10g Express Edition Beta 2 Release for Microsoft Windows (dated 16-Nov-05) and place into XML DB XSLT-file (UTF8-encoded and contained some Cyrillic chars) and 10g XP can`t apply such transformation but when i replace cyrillic chars with latin chars - everything work just fine. Is it known bug? Can it be fixed by some reconfiguration or moving to Linux version of 10g XP? When will new release?
truly yours,
Slav
p.s. here some oracle forum testing ХАРЕ=XAPE, PAMA=РАМА :)

Hello, Bhagat.
I don't understand why you would install HTMLDB with apexins.sql (it's a procedure to install HTMLDB for 9i and 10G EE/SE not XE)
because HTMLDB (APEX) is already install with Oracle Express Edition. Not need
to install it with apexins.sql
Mike

Connecting to Oracle Database 10g Express Edition

Hello guys,
Im running Windows XP SP2.
Ive just installed Oracle SQL Developer and Oracle Database 10g Express Edition.
Im trying to connect via SQL Developer with:
hr/hr (yes, ive unlocked this user)
localhost:1521
sid:orcl
but then it says:
"Status: Failure -Listener refused the connection with the following error:ORC-12505, TNS:listener does not currently know of SID given in connect descript..."
i guess its smth wrong with my SID.
Im total newbie to oracle, keep that in mind.
Please help!

The default SID for Oracle Database 10g Express Edition is XE.

Consolidation of Oracle Database 10g Express Edition "Bugs"

I'll take a stab at cleaning this up. This is a collection of postings, reported as bugs, but not really bugs or difficult to understand/reproduce. These were filed in the Database General forum and they should have been filed in the XE forum.
Firstly, thank you for taking the time to report these issues and suspected issues. In the future, it would be quite helpful to everyone if you reported these in the XE forum.
1. Oracle Database 10g Express Edition Bugs
This is not a bug. The developer toolbar will show when you are authenticated to the development environment. You do not have to be authenticated to your application for the developer toolbar to appear.
2. Oracle Database 10g Express Edition Bugs
If data is present in the cache, this is up to the application developer (you) to implement the proper security which prevents this behavior.
3. Oracle Database 10g Express Edition Bugs
This is a minor issue, at best. For this type of search interface, it is desirable to perform a case-insensitive query. Wouldn't it be a shame if you searched for "item" and it did not return results that contained "Item".
4. Oracle Database 10g Express Edition Bugs
This is not a bug. Different authentication schemes have different data restrictions. It is up to you, the application developer, to easily implement the data validations appropriate for your application.
5. Oracle Database 10g Express Edition Bugs
Insufficient information provided. You will have to specify what exact error message is arising and what data you changed which resulted in this error. A complete step-by-step test case is desirable, please.
6. Oracle Database 10g Express Edition Bugs
Duplicate of #5 above. And still insufficient information.
7. Oracle Database 10g Express Edition Bugs
Not a bug. This is intentional behavior. If I know I want to enter table name EMP, it would be bad from a usability standpoint to always force the user to employ their mouse.
8. Oracle Database 10g Express Edition Bugs
This could not be reproduced.
9. Oracle Database 10g Express Edition Bugs
Almost identical to #8. Please clarify what the expected behavior should be.
Joel

This discussion has been continued in the XE forum at:
Consolidation of Oracle Database 10g Express Edition "Bugs"
In the future, please attempt to post all XE-related issues in the XE forum.
Joel

Oracle Database 10g Express Edition and Forms 6i

Similar Messages

Maybe you are looking for