Oracle Database 10g Express Edition & linux Fedora

Hi guys
How are you doing?
I want to ask about my problem which is I can't access to the home page of Oracle Database 10g Express Edition when I press on "Go To Database Home Page" it's open firefox but does not do any thing by the way I try to write the web page http://127.0.0.1:8080/apex on the address bar but firefox give me an error which is "Unable to connect"
So please when you know the solution post it here step by step "I'm beginner linux user" .
My distribution is Fedora 14
..Thanks a lot
Saleh

Was the configure step completed successfully?i.e., did you run
/etc/init.d/oracle-xe configure after you installed the rpm? This is similar in XE 10g and 11g beta. You can run this again to reenter your configuration parameters, especially concerning HTTP port, and make sure they have the expected values that way.
Despite that, you could try to (re)start the service, and see if it comes up without errors.
/etc/init.d/oracle-xe stop
/etc/init.d/oracle-xe startIf everything doesn't look too bad, you could have a port conflict with another service using port 8080. In that case, you could reconfigure XE to have its HTTP server listening to a different port.
-Udo

Similar Messages

  • Oracle Database 10g Express Edition in a 64 bits Linux?

    Can I use Oracle Database 10g Express Edition in a 64 bits Linux? Thank you.

    I´m sure AMD 64 can emulate 32 bits, my problem is about the OS. I mean I´m not sure about the question: Can 64 bits RHEL or FC4 run 32 bits programs as Oracle Database 10g Express Edition?
    Thanks.

  • Oracle Database 10g Express Edition for Linux x86

    Hi all,
    I try to download Oracle Database 10g Express Edition (Universal) at
    http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
    but I get an error page. So how can I download rpm files?
    Thanks a lot.
    Kind Regards

    Ok, in fact it's very slow..
    Thanks a lot!
    I'm still not able to download.. I'will try until I get it.
    Regards,
    Lavinia

  • UTF support in XML DB at Oracle Database 10g Express Edition Beta 2

    hello everybidy! ;)
    I use Oracle Database 10g Express Edition Beta 2 Release for Microsoft Windows (dated 16-Nov-05) and place into XML DB XSLT-file (UTF8-encoded and contained some Cyrillic chars) and 10g XP can`t apply such transformation but when i replace cyrillic chars with latin chars - everything work just fine. Is it known bug? Can it be fixed by some reconfiguration or moving to Linux version of 10g XP? When will new release?
    truly yours,
    Slav
    p.s. here some oracle forum testing ХАРЕ=XAPE, PAMA=РАМА :)

    Hello, Bhagat.
    I don't understand why you would install HTMLDB with apexins.sql (it's a procedure to install HTMLDB for 9i and 10G EE/SE not XE)
    because HTMLDB (APEX) is already install with Oracle Express Edition. Not need
    to install it with apexins.sql
    Mike

  • I have Installed Oracle Database 10g Express Edition so i have Problem.....

    Hello Friends
    I have Installed Oracle Database 10g Express Edition in "Ubuntu Linux" but i have Following Problems:
    1.) After i installed Oracle Database 10g Express Edition i gone to
    "Application" -> "Oracle Database 10g Express Edition" -> "Run SQL Command Line"
    SQL Window has been opened there i have typed "SELECT * FROM tab;" here i got Warning Messg of
    "SP2-0640: Not connected"
    2.) From There i have Again gone to
    "Application" -> "Oracle Database 10g Express Edition" -> "Start Database"
    i got Warning Messg of "Operation Failed. venu is not a Member of DBA Group"
    3.) Finally i want Solution For "How to get Connected in "Oracle Database 10g Express Edition"
    Please Post the Answer As Soon As Possible ...
    From Venu(INDIA)

    Was the oracle-xe configure completed successfully?
    Are the pmon and listener processes running ... set your environment and connect via sqlplus if so. If no processes, the instance needs a startup.
    $ ps -ef |egrep pmon
    oracle ... ora_pmon_XE
    $ ps -ef |egrep lsnr   # can also check the listener status, see below
    oracle ... /usr/.../tnslsnr ...
    $ lsnrctl status
    Endpoints Summary ...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<your hostname>)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=http) ... (PORT=8080)))
    ...In the ORACLE_HOME/bin directory there is a shell script you can source to set up your environment variables for connecting to the database. The full path to the .sh should be revealed by the tnslsnr process, /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
    $ /usr/.../oracle_env.sh
    $ sqlplus /nolog
    SQL> connect system
    Password: ...
    Connected.
    SQL> select status from v$instance;
    STATUS
    OPENThe oracle user created by the configure won't have a known password set. Set it and switch user to the oracle login. If you don't want to muck about with the oracle user, at least add your user to the dba group so that you can connect with the sysdba privilege when needed.
    Edited by: clcarter on Feb 22, 2011 7:06 AM

  • Oracle Database 10g Express Edition with openSUSE 10.3 ?

    The install guide for Oracle Database 10g Express Edition say it requires Suse SLES-9 .
    Does any know if Express Edition can be installed on openSUSE 10.3 ?
    Thanks in advance.

    Likewise. No issues at all.
    You might want to web-search for Novell's orarun package. Not required if you read the install manual and understand Linux, but it helps prep the environment by eliminating some of the guess work.

  • Can Oracle Database 10g Express Edition be installed on CentOS?

    Hello!
    I know Oracle Database 10g Express Edition be installedRed Hat Enterprise Linux RHEL3 and RHEL4.
    Can it be installed on CentOS?
    Thank you,
    Mark.

    CentOS claims they're RH without the brand artwork so the answer is yes. I installed EE for testing purposes on CentOS and it worked ok. You should have no problem at all.

  • Dowload oracle Database 10g Expression Edition

    Hi im Keli
    i tried many times to dowload the oracle Database 10g Expression Edition for linux but i couldn't
    can someone give the the way to do it properly ?
    thank for your help

    What steps have you taken? (include links, responses and errors)
    What connectivity do you have? (indicate modem, DSL/Cable, reliable link, link speed, perhaps even country of origin would be useful)
    I regularily download and install new copies. Almost always with some form of high speed connection and I never had a problem. Therefore I conclude there is a concern about your connection or your process.
    Answering the above questions in detail would be useful. (Missing detail is somewhat like saying "I can not start my car. What is wrong?")

  • Problem upgrading Apex 2.1 to 3.2.1 in Oracle Database 10g Express Edition

    G'Day Apex gurus,
    I installed Oracle Database 10g Express edition in my Windows XP PC which comes with Apex 2.1 with no problems. Then I wanted to upgrade Apex 2.1 to 3.2.1 (Currently Apex download in OTN) following the document below:
    http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
    I went to the steps:
    @apexins SYSAUX SYSAUX TEMP /i/
    Then to change the password for the admin account run apxchpwd.sql and when prompted enter a password for the ADMIN account.
    @apxchpwd
    with not problems
    Then I connected to SQL*Plus as SYS by:
    sqlplus /nolog
    CONNECT SYS as SYSDBA
    Enter password: xxxxxxxxxxx
    but when I tried to run:
    @APEX_HOME/apex/apxldimg.sql APEX_HOME
    where APEX_HOME is Apex3.2.1 in my case
    SQL> @Apex3.2.1/apex/apxldimg.sql Apex3.2.1 (I get the messages below)
    PL/SQL procedure successfully completed.
    old   1: create directory APEX_IMAGES as '&1/apex/images'
    new   1: create directory APEX_IMAGES as 'Apex3.2.1/apex/images'
    Directory created.
    declare
    *+
    ERROR at line 1:
    ORA-22288: file or LOB operation FILEOPEN failed
    The system cannot find the path specified.
    ORA-06512: at "SYS.DBMS_LOB", line 523
    ORA-06512: at "SYS.XMLTYPE", line 287
    ORA-06512: at line 15
    PL/SQL procedure successfully completed.
    PL/SQL procedure successfully completed.
    Commit complete.
    timing for: Load Images
    Elapsed: 00:00:00.17
    Directory dropped.
    Can anyone help me in how to trouble shout this?
    I tried to continue by following the steps document
    @APEX_HOME/apex/apxxepwd.sql password
    (where password is the password of the Application Express internal ADMIN account)
    but when I tried to login in:
    http://localhost:8080/apex/f?p=4550:1
    when I type the credentials
    system
    system
    systempassword
    nothing happens
    or even If I try:
    http://localhost:8080/apex/f?p=4550:10
    admin
    adminpassword
    nothing happens here too.
    I appreciate any help
    Kind regards
    Carlos

    My database version is 10.2.0.1.0 Oracle express.
    Operating system is Windows Vista.
    I started installing using the following commands.
    @ C:\temp\apex\apexins.sql
    it prompts me for the values of sysaux sysaux temp and c:\temp\apex\images\
    If I supply the value for images the sqlplus window closes after scrolling a lot of info.
    Enroute it also prompts me for a value for 9:
    I don't know what the input shall be.
    Then it again stops at enter value for version:
    I used 3.2.1.0
    The window scrols a while and closes.
    later I changed the password and ran the command.
    @c:\temp\apex\apxldimg.sql c:\temp
    but no success with installation.
    the output is as following.
    SQL*Plus: Release 10.2.0.1.0 - Production on Fri Nov 27 18:13:43 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> connect system/sairam as sysdba;
    Connected.
    SQL> @ c:\temp\apex\apxchpwd
    Enter a value below for the password for the Application Express ADMIN user.
    Enter a password for the ADMIN user []
    Session altered.
    ...changing password for ADMIN
    wwv_flow_security.g_security_group_id := 10;
    ERROR at line 3:
    ORA-06550: line 3, column 5:
    PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
    ORA-06550: line 3, column 5:
    PL/SQL: Statement ignored
    ORA-06550: line 4, column 5:
    PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
    ORA-06550: line 4, column 5:
    PL/SQL: Statement ignored
    ORA-06550: line 5, column 5:
    PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
    ORA-06550: line 5, column 5:
    PL/SQL: Statement ignored
    ORA-06550: line 8, column 23:
    PL/SQL: ORA-00942: table or view does not exist
    ORA-06550: line 7, column 15:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 13, column 32:
    PLS-00364: loop index variable 'C1' use is invalid
    ORA-06550: line 12, column 9:
    PL/SQL: Statement ignored
    ORA-06550: line 19, column 5:
    PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
    ORA-06550: line 19, column 5:
    PL/SQL: Statement ignored
    Commit complete.
    SQL> @c:\temp\apex\apxldimg.sql c:\temp
    PL/SQL procedure successfully completed.
    Directory created.
    if wwv_flow_utilities.db_version_is_at_least('11') then
    ERROR at line 32:
    ORA-06550: line 32, column 25:
    PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
    ORA-06550: line 32, column 3:
    PL/SQL: Statement ignored
    PL/SQL procedure successfully completed.
    if wwv_flow_utilities.db_version_is_at_least('11') then --11g only
    ERROR at line 16:
    ORA-06550: line 16, column 25:
    PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
    ORA-06550: line 16, column 3:
    PL/SQL: Statement ignored
    Commit complete.
    timing for: Load Images
    Elapsed: 00:00:00.32
    Directory dropped.
    SQL>
    Does this require XE 11 or anything else.
    This will happen even if I supply as following(closing of sqlplus in the begining).
    @ C:\temp\apex\apexins.sql sysaux sysaux temp c:\temp\apex\images\
    Any help.

  • Can't succesfully install Oracle Database 10g Express Edition on Ubuntu

    Hi,
    I've been trying to install Oracle Database 10g xe on Ubuntu 10.04 and when I execute the .deb package (oracle-xe-universal_10.2.0.1-1.0_i386.deb) I get a quick installation that doesn't ask me for any configuration settings. When the installation is finished I don't get any menu in my Applications menu named "Oracle Database 10g Express Edition" as specified in Getting Started Guide (I only get some items grouped into an category called "Other" (Backup Database, Get Started, Get Started With Oracle Database 10g Express Edition, Go To Online Forum, Read Documentation, Read Online Help, Register For Online Forum, Restore Database, Run SQL Command Line, Start Database and Stop Database). As a consequence I can't access the Oracle Database Home Page.
    In addition when I click on Start Database I get the following message: "Operation failed. josep is not member of 'dba' group".
    I've tried to re-download the packages and to configure it by editing /etc/init.d/oracle-xe but this doesn't solve my problem.
    can you give me some help?
    Thabk you in advance!

    Markus Waldorf wrote:
    Did you run the post-installation?
    $ sudo /etc/init.d/oracle-xe configureYes I've done it but it doesn't seem to work...

  • Oracle Database 10g Express Edition Bugs

    Product:Oracle Database 10g Express Edition
    Title:Tab Order Sequence on Login window
    Description: Tab Order sequence in Login window not proper, it should be proper
    Reproduce Steps:
    - Click on Run Application icon
    - Login Window opened
    - Press the Tab Button

    hi,
    Please, post this on the Oracle DB express FORUM
    when you install it it will create a menu to directly access to it.
    If you are not able to find it, then you can use the link below:
    Oracle Database Express Edition (XE)
    You have to register to see the forum.
    support for 10g express is provided in the mentioned forum.

  • Oracle Database 10g Express Edition

    Does Oracle Database 10g Express Edition allow for more than one database to be created? If yes, then how do I create additional databases?

    Only one database per computer is allowed.
    Read about the XE limitations here

  • [Oracle Database 10g Express Edition] Don't UP

    Hi,
    I've installed the "Oracle Database 10g Express Edition" in my laptop, ThinkPad T60. The installation finish fine or I think that.
    In the event viewer I don't see any error.
    But I cant sing on in SQL/PLUS and I can't go to web config. All services are up.
    The erro when i conect by SQL PLUS are:
    SQL> connect system/PASSWORD as sysdba
    ERROR:
    ORA-12560: TNS:error del adaptador de protocolo
    SQL> connect system/PASSWORD@localhost as sysdba
    ERROR:
    ORA-12514: TNS:el listener no conoce actualmente el servicio solicitado en el
    descriptor de conexión
    I cant found the error becose It happens.
    I uninstall the database, erase the registry of Windows and Install again. But nothing success. I uninstall again, erase the registry, download again from www.oracle.com all continuous one equally.
    Thanks for all!

    SQL*Plus: Release 10.2.0.1.0 - Production on Vie Oct 20 14:47:04 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> connect / as sysdba
    Conectado a una instancia inactiva.
    SQL> connect sys/PASSWORD@localhost as sysdba
    ERROR:
    ORA-12514: TNS:el listener no conoce actualmente el servicio solicitado en el
    descriptor de conexi¾n
    Advertencia: íYa no estß conectado a ORACLE!
    SQL>
    The Services are UP.
    The name of enviourment varible is oracle_sid but the value is?
    In My PC --> Propierties ---> Advanced Option ---> Enviorurment variable
    System or User?
    Thanks an i waiting for your help

  • Oracle Database 10g Express Edition (Oracle Database XE)/ BI Publisher

    Hi,
    I have installed Oracle Database 10g Express Edition (Oracle Database XE) on my windows machine and would like to work with BI publisher for reporting in APEX applications.
    Question: Can I install and work with BI publisher on ORACLE DATABASE XE?
    If not any other options available?
    Appreciate any help.
    Thanks,
    Lakshmi

    hi,
    yes you can install.. try
    Oracle Discoverer 10g (Oracle BI Suite Standard Edition)
    regards,
    Deepak

  • How to Connect Oracle Database 10g Express Edition ?

    From example
    http://www.oracle.com/technology/obe/hol08/dotnet/getstarted-c/getstarted_c_otn.htm
    using Oracle.DataAccess.Client; // ODP.NET Oracle managed provider
    using Oracle.DataAccess.Types;
    string oradb = "Data Source=ORCL;User Id=hr;Password=hr;";
    OracleConnection conn = new OracleConnection(oradb); // C#
    conn.Open(); <== Connect Error
    Error Message "ORA-12154: TNS:could not resolve the connect identifier specified"
    I used
    Visual Studio 2005
    Oracle Database 10g Express Edition
    setup "Oracle Developer Tools for Visual Studio .NET with ODAC 10.2.0.2.21"
    Best Regards,
    Edited by: user1949694 on 8 ก.ย. 2552, 9:20 น.

    I search "tnsnames.ora" in my computer. I found 3 file
    1. C:\oraclexe\app\product\10.2.0\server\hs\admin\tnsnames.ora
    2. C:\oraclexe\app\product\10.2.0\server\NETWORK\ADMIN\tnsnames
    3. C"\oraclexe\app/product\10.2.0\server\NETWORK\ADMIN\SAMPLE\tnsnames
    How to entry in your tnsnames.ora file File1, File2, File3
    How to called "ORCL"?
    Please Help Me Step by Step
    Thank You.
    : )

Maybe you are looking for