Oracle Database 10g on Red Hat Linux Virtual Machine download location?

anyone know where i can download the vmware image of redhat and oracle preinstalled?
its called "Oracle Database 10g on Red Hat Linux Virtual Machine"
i found a reference to it on this page, but the link at the bottom is broken.
http://www.oracle.com/technology/obe/10gr2_db_vmware/htmlfiles/readme_oracleonlnxeval.html
i want to test out oracle on redhat before i install it completely

Please don't cross post on many forums,
check where can i download a vmware image of redhat and oracle preinstalled?

Similar Messages

Download oracle 11g/10g for red hat linux

hi,
I have installed VM WARE on my laptop now want to download linux ISO and Oracle ISO.
could you please tell me whcih linux version i have to install which support oracle for linux.
from where i get that
-linux installation files
-oracle installation files
both the above will install on oracle vm ware
thanks
Edited by: hard_stone on Sep 30, 2009 11:33 PM

hard_stone wrote:
hi,
I have installed VM WARE on my laptop now want to download linux ISO and Oracle ISO. Red Hat, Centos and Oracle Enterprise Linux are almost identical. The major differences are:
- Red Hat and Oracle Enterprise Linux are officially supported by Oracle to be used under Oracle products;
- CentOS is NOT officially supported
- the newer Oracle Enterprise Linux (OEL) includes an 'oracle-validate' rpm to reduce configuration guessing
Each Distro has it's purpose. I use SUSE and OpenSUSE for my office. And for general servers I use RedHat (when I need commercial support) and CentOS. I fully support CentOS and the CentOS community effort.
However, for the past year I have ONLY used Oracle Enteprise Linux under Oracle product. It is free, it is officially supported, if I need commercial support I can get it, and it has the Oracle Validated RPM to minimize my config effort. http://edelivery.oracle.com
So, as compared to the other respondent - I encourage using OEL and NOT CentOS.

How to install oracle developer 10g on red hat 5.3

Dear forum members,
i have to install oracle developer 10g on red hat 5.3 . I am searching on google and metalink but i did not find any doccument.
If somebody has some material or any doccument for this Installation plz help me.
regards

i have fullfilled pre-requisites to install developer 10g on red hat 4.5
i copy the source in "/var/opt/oracle/" Source is in .cpio format.
i unzip this source with cat Disk1.cpio | cpio -icd.
when i run the runINstaller it cant find /var/opt/oracle/..........Disk1/products.xml file.
when i find this file with command find -name 'products*' or find -name '*.xml'
i cant find products.xml.
is there any problem with source
reply

Oracle Upgrade 8.1.7.4 to 10g in Red hat linux

Dear All,
We are planning to upgrade our oracle database from 8i to 10g along with the Redhat linux upgrade from 2.4.9-e 27 ent to Red Hat Linux 5. In my study and also from Installation guides and oracle upgrade guides I made sure that its possible to upgrade our database from 8.1.7.4.
So I have planned the below options to do the same and not sure about the possibilities. If anyone have thoughts and idea on the same please suggest me.
We dont have plan to migrate the development hardware and the sap version is 4.7E
Option 1: Upgrade the Linux to 5 and then upgrading the database to 10g usign upgrade assistant tool
Option 2: Export the database using sapinst tool and then crashing the server. Installing linux5 and importing the database using sapinst tool.(I am aware this is not a good idea since there is no migration in hardware but it will be helpful in production since we are migrating the production system).
Option 3: Performing DBUA assistant in development and sapinst method in production.(helpful in disaster recovery)
Could you please suggest on the same?
My query is that.
If i am performing oracle export from 8.1.7.4 and if i am import the same in oracle 10g using the sapinst tool. Will this work? or it will create a problem in table level. I am looking for answers for this Question. Kindly explain me on this.
Regards
Vijay

Re: Restoring data from 9i to 10g
The above link was useful to me
Regards
Vijay

Oracle 10g on Red Hat Linux 9

Hello,
Contrary to what Oracle advise, we're about to install Oracle 10g on Red Hat 9. I'm afraid that the decision is out of my hands.
Has anyone installed Oracle 10g database on Red Hat 9? and if so, is the database running smoothly? If not what type of problems have you experienced?
Thanks in advenace.
Kind Regards,
Rudi

but my installation is failed :
after i type in ./runInstaller,the following exception is throw:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2004-08-26_04-56-29PM/installActions2004-08-26_04-56-29PM.log
why?thanks for any helps!!!!

Networking error (ORA-28547) with 10g on Red Hat Linux

Hello everybody
I'm having the following error when trying to set up a 10g database on a Red Hat machine. I can start the listener correctly, but then the Enterprise Manager shows the following error in the 'Agent Connection to Instance' section:
ORA-28547: connection to server failed, probable Oracle Net admin error (DBD ERROR: OCISessionBegin)
When I try to access using SQL*Plus, I get the same error. I don't know what can be wrong: the listener starts correctly, tnsping gives OK, both using the server name and the SID, and the config. files seem to be correct. Anyone has a clue?
Thanks in advance for your answers.
Just in case, here are (the relevant parts of) mi config. files:
listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM = extproc)
(SID_NAME = oradb10g)
(ORACLE_HOME = /opt/app/oracle/)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = oradb10g))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = st03)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
tnsnames.ora:
ORADB10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = st03)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oradb10g)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(Key = EXTPROC0))
(CONNECT_DATA =
(SID = oradb10g)
(PRESENTATION = RO)
sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES=(NONE)
Thanks again.

Sorry for the delay, I've been kind of busy :S
Here are the requested files' contents
/etc/hosts:
192.168.1.19 st00.summatec.net st00
192.168.1.33 st03.summatec.net st03
127.0.0.1 localhost.localdomain localhost
192.168.1.11 st01.summatec.net st01
/etc/nsswitch.conf:
passwd: files
shadow: files
group: files
hosts: files dns
bootparams: nisplus [NOTFOUND=return] files
ethers: files
netmasks: files
networks: files
protocols: files
rpc: files
services: files
netgroup: files
publickey: nisplus
automount: files
aliases: files nisplus
$ORACLE_HOME/sysman/config/emd.properties:
perlBin=/opt/app/oracle/perl/bin
scriptsDir=/opt/app/oracle/sysman/admin/scripts
emdRoot=/opt/app/oracle
agentStateDir=/opt/app/oracle
chronosRoot=/opt/app/oracle/sysman/emd/chronos
REPOSITORY_URL=http://st03.summatec.net:4889/em/upload/
agentSeed=802746336
agentVersion=10.1.0.4.0
UploadInterval=5
UploadFailBackoffPct= 20
UploadTimeout=1800
UploadFileSize=2048
UploadMaxBytesXML=50
UploadMaxNumberXML=5000
UploadMaxDiskUsedPct=98
UploadMaxDiskUsedPctFloor=95
emdRootCertLoc=/opt/app/oracle/sysman/config/b64LocalCertificate.txt
internetCertLoc=/opt/app/oracle/sysman/config/b64InternetCertificate.txt
emdWalletSrcUrl=http://st03.summatec.net:4889/em/wallets/emd
emdWalletDest=/opt/app/oracle/sysman/config/server
emd_email_address=
emd_email_gateway=
emd_from_email_address=
EMD_URL=http://st03.summatec.net:/emd/main/
AgentListenOnAllNICs=TRUE
NormalThreadStackSize=0
ouiLoc=/opt/app/oracle/oui
hostConfigClasspath=/opt/app/oracle/oui/jlib/xmlparserv2.jar:/opt/app/oracle/oui/jlib/OraInstaller.jar:/opt/app/oracle/oui/jlib/srvm.jar:/opt/app/oracle/oui/jlib/share.jar:/opt/app/oracle/sysman/jlib/emd_java.jar:/opt/app/oracle/sysman/jlib/log4j-core.jar
JAVA_HOME=/opt/app/oracle/jdk/jre
CLASSPATH=/opt/app/oracle/sysman/jlib/emd_java.jar:/opt/app/oracle/opmn/lib/ons.jar:/opt/app/oracle/lib/xmlparserv2.jar:/opt/app/oracle/sysman/jlib/log4j-core.jar:/opt/app/oracle/oc4j/j2ee/home/lib/http_client.jar:/opt/app/oracle/lib/dms.jar:/opt/app/oracle/lib/dmsEmd.jar:/opt/app/oracle/jlib/share.jar:/opt/app/oracle/jdbc/lib/ojdbc14dms.jar:/opt/app/oracle/jlib/jssl-1_1.jar:/opt/app/oracle/jlib/javax-ssl-1_1.jar:/opt/app/oracle/jlib/ojmisc.jar:/opt/app/oracle/lib/em_test.jar:/opt/app/oracle/jlib/ojmisc.jar:/opt/app/oracle/jlib/repository.jar:/opt/app/oracle/opmn/lib/optic.jar
agentJavaDefines=-Doracle.dms.refresh.wait.time=1000 -DUrlTiming.UseJSSE=true
LogFileMaxSize=4096
LogFileMaxRolls=4
TrcFileMaxSize=4096
TrcFileMaxRolls=4
dynamicPropsComputeTimeout=60
EMAGENT_PERL_TRACE_LEVEL=ERROR
tracelevel.main=WARN
tracelevel.emSDK.xml=WARN
tracelevel.emSDK.utl=WARN
tracelevel.ResMonitor=WARN
tracelevel.Dispatcher=WARN
tracelevel.ThreadPool=WARN
tracelevel.pingManager=WARN
tracelevel.collector=WARN
tracelevel.http=WARN
tracelevel.ssl=WARN
tracelevel.ssl.io=WARN
tracelevel.blackouts=WARN
tracelevel.upload=WARN
tracelevel.command=WARN
tracelevel.reload=WARN
tracelevel.scheduler=WARN
tracelevel.Authentication=WARN
tracelevel.metadata=WARN
tracelevel.targets=WARN
tracelevel.TargetManager=WARN
tracelevel.engine=WARN
tracelevel.javaproc=WARN
tracelevel.vpxoci=WARN
tracelevel.javavm=WARN
tracelevel.fetchlets=WARN
tracelevel.fetchlets.os=WARN
tracelevel.fetchlets.osline=WARN
tracelevel.fetchlets.oslinetok=WARN
tracelevel.fetchlets.UDM=WARN
tracelevel.fetchlets.sql=WARN
tracelevel.fetchlets.url=WARN
tracelevel.fetchlets.urllines=WARN
tracelevel.fetchlets.urllinetoken=WARN
tracelevel.fetchlets.URLTiming=WARN
tracelevel.fetchlets.propEcho=WARN
tracelevel.fetchlets.readFromFile=WARN
tracelevel.fetchlets.readMultFromFile=WARN
tracelevel.fetchlets.throwable=WARN
tracelevel.fetchlets.resourceGrab=WARN
tracelevel.fetchlets.emSDK=WARN
httpTimeoutPrimaryHeader=30
httpTimeoutSecondaryHeaders=30
httpTimeoutBody=60
$ORACLE_HOME/log/st03/client/css.log:
(the following lines are repeated several times)
2006-05-02 12:33:35.709: [ OCROSD][3070490304]utgdv:2:ocr loc file cannot be opened
2006-05-02 12:33:35.710: [ OCROSD][3070490304]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2006-05-02 12:33:35.710: [ OCRRAW][3070490304]proprinit: Could not open raw device
2006-05-02 12:33:35.710: [ default][3070490304]a_init:7!: Backend init unsuccessful : [33]
2006-05-02 12:33:35.711: [ CSSCLNT][3070490304]clsssinit: error(33 ) in OCR initialization
$ORACLE_HOME/network/log/listener.log (a representative piece):
05-MAY-2006 10:46:58 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=oradb10g)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.33)(PORT=52204)) * establish * oradb10g * 0
05-MAY-2006 10:47:07 * ping * 0
WARNING: Subscription for node down event still pending
05-MAY-2006 10:47:07 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=st03.summatec.net)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADDRESS=(PROTOCOL=TCP)(HOST=st03.summatec.net)(PORT=1521)))(VERSION=169869568)) * status * 0
05-MAY-2006 10:47:08 * (CONNECT_DATA=(SID=oradb10g)(CID=(PROGRAM=perl)(HOST=st03.summatec.net)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.33)(PORT=52208)) * establish * oradb10g * 0
05-MAY-2006 10:47:28 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=oradb10g)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.33)(PORT=52212)) * establish * oradb10g * 0
(the last line is repeated several times)
$ORACLE_HOME/network/log/sqlnet.log :
Fatal NI connect error 12505, connecting to:
(DESCRIPTION=(SOURCE_ROUTE=OFF)(ADDRESS=(PROTOCOL=IPC)(Key=EXTPROC0))(CONNECT_DATA=(SID=oradb10g)(SERVER=)(PRESENTATION=RO)(CID=(PROGRAM=java)(HOST=st03.summatec.net)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.1.0 - Production
Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 10.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.1.0 - Production
Time: 02-MAY-2006 12:35:22
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12505, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(Key=EXTPROC0))(CONNECT_DATA=(SID=oradb10g)(PRESENTATION=RO)(CID=(PROGRAM=java)(HOST=st03.summatec.net)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.1.0 - Production
Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 10.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.1.0 - Production
Time: 02-MAY-2006 12:38:18
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
I wasn't sure which logs to post, so I included the ones in $ORACLE_HOME/logs and $ORACLE_HOME/network/logs; I hope they are helpful.
Thanks again, and sorry for the long post.

Oracle 8i Internet for Red Hat Linux

Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you

Let me try again. I was to fast with the enter key. There is a known bug with the installer. The work around is to use the runInstall.sh that is in the subdirectory /install/linux. If you have your environment variables setup correctly this should work, also you need a minimum of 128 meg of ram on the machine.
Hope this helps.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by hhtham ():
Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you<HR></BLOCKQUOTE>
null

Oracle 8i/9i and Red Hat Linux version

Hi,
Does anyone know, which is the earliest version of Red Hat Linux
supported by Oracle 8i or 9i?
Regards

Hi,
I downloaded the 9i, the installation started ok and I was
able to complete the install procedure, but a few things did not
go as I planned:
1.- The installation MUST be run on the console X, and cannot
be run from a remote terminal (odd!).
2.- On a 2-CPU machine the installation didn't install all the
files for the sistem to start.
3.- During a second attempt the installer issued an error
regarding a compilation problem.
Can anyone help me, I can't get the installer running without
problems.

Oracle 9i installation on Red Hat Linux 9 URGENT

hi,
I live in london, I have tried a lot to install Oracle 9i Enterprise edition on Red Hat Linux 9, but couldn't do it, can any one help me to install it, I am ready to pay and visit any place in london for that purpose in the evening, if any one can help my mobiel number 07832 077672
best regards
asif

If you are only trying to learn, I would recommend either Fedora FC4 or OpenSuSE 10, and I would recommend installing ORacle Express Edition if you do not need advanced Oracle stuff (or you are not learning for OCP).
Again, use Werner's excellent site - http://www.puschitz.com or Ivan Kartik's site - http://ivan.kartik.sk/oracle/install_ora9_fedora.html to get good instruciton on installation.
If you want a free version that is as close to a supported Linux as legally possible, consider using WhiteBoxLinux.org, TaoLinux.org or CentOS.org linux. These are clones of RedHat Enterprise (the one that is supported). Or you could contact Novell.com and ask for an evaluation kit for SLES9.

Oracle Database 10g Express Edition for Linux x86

Hi all,
I try to download Oracle Database 10g Express Edition (Universal) at
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
but I get an error page. So how can I download rpm files?
Thanks a lot.
Kind Regards

Ok, in fact it's very slow..
Thanks a lot!
I'm still not able to download.. I'will try until I get it.
Regards,
Lavinia

Error connecting via PHP to Oracle Database 10g XE in Arch Linux with XAMPP

I get this error whenever I try to connect through PHP to my locally hosted Oracle Database 10g Express Edition
Warning: oci_connect() [function.oci-connect]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that LD_LIBRARY_PATH includes the directory with Oracle Instant Client libraries in <filename>.php on line 10
What can I do?

Not sure what to offer for XAMP with php, perhaps it needs a configure pointing OCI8 to your ORACLE_HOME, as well as setting the oracle environment and PATH adjustment in the Apache start script.
Somewhere under /etc there should be an init.d or perhaps rc.d directory with maybe an apache2 script that gets called at system boot or run level change. It will take editing that shell script and adding something like:
export ORACLE_HOME=/usr/....
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATHAnd restarting apache ... $ [sudo] {RC path}/apache2 restart or $ ...apache2 stop followed by an $ ...apache2 start all depending on how the boot/inits are setup on the box.
And in your $ORACLE_HOME/network/admin/tnsnames.ora adding a tnsalias won't hurt (as long as the whitespace as well as matching parenthesis are all in order)
myxedb =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = myhost.mycompany.com)(PORT = 1521))
    (CONNECT_DATA =
      (SID = XE)
)

Installation of OracleAS 10g on Red Hat Linux ES 3.0

Installation of Oracle AS 10g on RedHat ES 3.0
Red Hat Enterprise Linux 3
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1.     Boot the server using the first CD.
o     You may need to change your BIOS settings to allow booting from the CD.
2.     The boot screen appears with the boot: prompt at the bottom of the screen.
o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3.     Language Selection
o     Accept the default.
4.     Keyboard Configuration
o     Accept the default.
5.     Welcome Screen
o     Click on Next.
6.     Mouse Configuration
o     Accept the default.
7.     Installation Type
o     Select Custom.
8.     Disk Partitioning Setup
o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9.     Boot Loader Configuration
o     Accept the default.
10.     Network Configuration
o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o     In the Hostname box, select manually and enter the hostname.
o     In the Miscellaneous Settings box, enter the remaining network settings.
11.     Firewall Configuration
o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
12.     Additional Language Support
o     Accept the default.
13.     Time Zone Selection
o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14.     Set Root Password
o     Enter a password for root, and enter it again to confirm.
15.     Package Group Selection
o     Select only the package sets shown here. Leave all others unselected.
o     Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o     Applications
- Editors
- Graphical Internet
o     Servers
- Do not select anything in this group.
o     Development
- Development Tools
o     System
- Administration Tools
o     Red Hat Enterprise Linux
- Do not select anything in this group.
o     Miscellaneous
- Legacy Software Development
o     Click on Next to proceed.
16.     About to Install
o     Click on Next.
17.     Installing Packages
o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18.     Graphical Interface (X) Configuration
o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19.     Monitor Configuration
o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20.     Customize Graphical Configuration
o     Accept the defaults.
21.     Congratulations
o     Remove the installation media from the system, and click on Next.
22.     The system automatically reboots and presents a new welcome screen.
o     Click on Next.
23.     License Agreement
o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24.     Date and Time
o     Set the Date and Time.
o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25.     User Account
o     Create an account for yourself.
o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26.     Red Hat Network
o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27.     Additional CDs
o     Click on Next.
28.     Finish Setup
o     Click on Next.
29.     A graphical login screen appears.
30.     Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc     /usr/bin/gcc323
mv /usr/bin/g++     /usr/bin/g++323
ln âsf /usr/bin/gcc296     /usr/bin/gcc
ln âsf /usr/bin/g++296     /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y               (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora     â¦     oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan Ali
@CES
[email protected]

Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
     oracleasmlib-1.0.0-1.i386.rpm \
     oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant

Oracle 10g on red hat linux enterprise 4

Please
Is REH enterprise 4 is perfect for installing oracle 10g or are there any installation issues. please guide me any one
Nasir

Hi everyone
Even though I'm an Oracle ACE I'm not an ACE in the Linux operating system.
I am getting a new laptop that has 4 GB RAM and a server that has a quad-core with 4 GB RAM and SCSI drives. Both of these are using the Windows operating system, the laptop using WIndows XP and the server using 2003 Server.
I have been advised to use VM Ware to install Linux and then install my Oracle database and / or application server.
Has anyone done this and would you be willing to give me some pointers?
I also noticed in this thread that someone is not recommending the use of Linux 5 from Oracle but rather use version 4, update 5. Would you be willing to let me have the low down on this?
If anyone has any white papers or word documents that show how to install Linux 4.5 on VM Ware I would be most grateful. My email address is: [email protected]
Best wishes
Michael
Best wishes
Michael

Installation of Oracle AS 10g on Red Hat ES 3.0

Installation of Oracle AS 10g on RedHat ES 3.0 (All issues are cleared and u will b done with no error like Java Configuration Failed and make files errors)
Red Hat Enterprise Linux 3 Custom Installation
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1.     Boot the server using the first CD.
o     You may need to change your BIOS settings to allow booting from the CD.
2.     The boot screen appears with the boot: prompt at the bottom of the screen.
o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3.     Language Selection
o     Accept the default.
4.     Keyboard Configuration
o     Accept the default.
5.     Welcome Screen
o     Click on Next.
6.     Mouse Configuration
o     Accept the default.
7.     Installation Type
o     Select Custom.
8.     Disk Partitioning Setup
o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9.     Boot Loader Configuration
o     Accept the default.
10.     Network Configuration
o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o     In the Hostname box, select manually and enter the hostname.
o     In the Miscellaneous Settings box, enter the remaining network settings.
11.     Firewall Configuration
o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
12.     Additional Language Support
o     Accept the default.
13.     Time Zone Selection
o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14.     Set Root Password
o     Enter a password for root, and enter it again to confirm.
15.     Package Group Selection
o     Select only the package sets shown here. Leave all others unselected.
o     Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o     Applications
- Editors
- Graphical Internet
o     Servers
- Do not select anything in this group.
o     Development
- Development Tools
o     System
- Administration Tools
o     Red Hat Enterprise Linux
- Do not select anything in this group.
o     Miscellaneous
- Legacy Software Development
o     Click on Next to proceed.
16.     About to Install
o     Click on Next.
17.     Installing Packages
o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18.     Graphical Interface (X) Configuration
o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19.     Monitor Configuration
o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20.     Customize Graphical Configuration
o     Accept the defaults.
21.     Congratulations
o     Remove the installation media from the system, and click on Next.
22.     The system automatically reboots and presents a new welcome screen.
o     Click on Next.
23.     License Agreement
o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24.     Date and Time
o     Set the Date and Time.
o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25.     User Account
o     Create an account for yourself.
o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26.     Red Hat Network
o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27.     Additional CDs
o     Click on Next.
28.     Finish Setup
o     Click on Next.
29.     A graphical login screen appears.
30.     Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc     /usr/bin/gcc323
mv /usr/bin/g++     /usr/bin/g++323
ln âsf /usr/bin/gcc296     /usr/bin/gcc
ln âsf /usr/bin/g++296     /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y               (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora     â¦     oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan
@CES
[email protected]

Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
     oracleasmlib-1.0.0-1.i386.rpm \
     oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant

Oracle 8i installation with Red Hat Linux 6.2

Hi
Please help us in solving the below mentioned problem.
We are trying to install Oracle 8.1.7 under Linux 6.2 . During the installation the following error displays and could not able to finish the instllation. The problem is
Error in invoking target ntcontab.o of makefile /usr/local/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
If any has a soln for this please reply to us. Thanks in advance
regards
Santhosh
null

Miguel Tsuboyama (guest) wrote:
: Pinwu Xu (guest) wrote:
: : Terry (guest) wrote:
: : : Hi,
: : : I am still stuck on DISPLAY error.
: : : The messages I get when I issue ./runInstaller command are:
: : : Initailizing Java Virtual Machine from
: /usr/local/jre/bin/jre
: : : Please wait...
: : : Xlib: connection to "QIS:0.0" refused by server
: : : Xlib: Invalid MIT-MAGIC-COOKIE-1 KEY
: : : Java.lang.Internal Error: can't connect to X11 window
server
: : : using 'QIS:0.0' as the value of the DISPLAY variable
: : : QIS is the server name that I am installing Oracle to.
: : : The manual says I should set it to
: : : DISPLAY=work_station_name:0.0
: : : export DISPLAY
: : The work_station_name is the name of the machine the monitor
: : you are facing to connects to, with X Window running. If
: : you have only one machine, simply typing
: : export DISPLAY=:0
: : suffices.
: : Hope this helps.
: : : but I don't have any workstations connected to the linux
box
: : : yet. I am installing oracle to a standalone machine. What
: is
: : : that work_staion_name supposed to be? Obviously using the
: : server
: : : name as work station name didn't do me any good.
: : Pinwu
: You must grant permission to connect to the XServer...
: If you XServer was started by root, you must grant from root
the
: permission via: xhost +localhost
: Regards,
: Miguel T.
Hi Terry,
I initially experienced the same "connection refused" message as
you from xlib when performing a local installation using GNOME.
My problem was to do with logging on to X as root (to mount the
CDROM) and then switching to the oracle account to do the
install.
If I logged to X as oracle I didn't need to change the default
DISPLAY value of :0 .
Daniel.
null

Oracle Database 10g on Red Hat Linux Virtual Machine download location?

Similar Messages

Maybe you are looking for