Oracle Database 10g r2 download problems

I cannot seem to download oracle database 10g release 2 for windows at all. I have tried consistently the entire day. Is it available for download?
As I need this software quite urgently, are there any mirror sites or alternative sites that I can download it from? Or is there anywhere that I can source the installation cd's from... I am based in Johannesburg, South Africa?

Which one is best for an x86_64 install?These options are platform independent (x86_64). These options are dependent on purpose of use.
I plan to recompile PHP 5.2.0 to connect to the Oracle database.This is the purpose. And according this information I suggest you to install InstantClient.
Note standalone Instant client is shipped also as separate installation archive, so you don't need to download whole DB installation archive. You can find it here: http://www.oracle.com/technology/tech/oci/instantclient/index.html
I would like to install client software on a different machine which is running Fedora Core 5 with IP address 192.168.0.5. But the Universal Installer refuses to run on Fedora Core 5 -- it is not a supported operating system. There is no magic to allow running a client on Fedora Core 5 or 6?Yes, there is. Execute: ./runInstaler -ignoreSysPrereqs

Similar Messages

Oracle database 10.2 download problem

I am readind the book of mark williams.
At page 405 database configuration assistant ...
on page 409 figure a-28 i click the ok. botton then netwoek adapter problem occured.tns-12560 protocol adapter error.I have adsl connecyion.I installed both database and clint on the same machine.First by installing the database 10gr2 .I followed the books steps .On page 409 after pressing the ok button.Suddenly universal installer cant create the database ang give me ora-12560 error.I check from book tnnames and listener files.I write similar (like in the book) butthere is no connection to database.I tried install againbut i couldnt solve the problem.Can you help me.It is vital for me to install this database.(I should write a thesis to become a specialist).So is vital for me to install 10gr2.
Dear mark as a writer you didnt mentioned such error could happen.There are some dATA AT PAGE 22 about this error message but it couldn't solve the issue.
So what are correct tnnames and sqlnet ora files for version 10.2.0.1.0 (10g release 2)
Can anyone especially the auther of the pro .net oracle proggramming help me
Thanks for reading my message

Hello,
TWO_TASK is a UNIX-specific environment variable. The equivalent on Windows is called "LOCAL". You can find out more about LOCAL here:
http://download-east.oracle.com/docs/cd/B19306_01/win.102/b14304/ap_net.htm#i634314
I don't think LOCAL will be relevant for you. You should know if you set it - it does not get set automatically.
The above link comes from the "Oracle® Database Platform Guide 10g Release 2 (10.2) for Microsoft Windows (32-Bit)" located here:
http://download-east.oracle.com/docs/cd/B19306_01/win.102/b14304/toc.htm
1) I assume you are installing the software on Windows - is that correct?
2) What is the value of your PATH variable?
3) Please post the sqlnet.ora and tnsnames.ora files from each Oracle Home. Change proprietary information if necessary.
4) Please post the listener.ora file from the server software Oracle Home. Change proprietary information if necessary.
Thanks,
Mark

Oracle Express 10g Edition Download Problem

Can someone know what is the problem with downloading express 10g edition?
http://www.oracle.com/errors/404.html
thanks
m.

Hilton wrote:
But the link is broken.
Apparently there is an internal problemYou are right, whether the link of the page is working, the link of the download does not work. Error 404 is returned. It seems several download issues have been reported earlier today.
Check the download dedicated forum :
Downloads Issues
Nicolas.

Download link for Oracle Database 10g Documentation seems to be broken.

Hi,
I am trying to download the documentation for Oracle Database 10g but the zip archive seems to be corrupt. The md5 checksum for the file I have downloaded is:
$> md5 Downloads/B19306_01.zip
MD5 (Downloads/B19306_01.zip) = 75551f2bb5cfeecedcd08e2e6ac71bf7
and the unzip output is:
$> unzip Downloads/B19306_01.zip
Archive: Downloads/B19306_01.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of Downloads/B19306_01.zip or
Downloads/B19306_01.zip.zip, and cannot find Downloads/B19306_01.zip.ZIP, period.
Also, the file size of my downloaded file is 443.4 MB but the size mentioned on the download page is 445.8 MB
I have twice tried to download the file but both times I get the same corrupt zip error. Can any one confirm the status of the file.
Oracle Database 10g Documentation Download page:
http://www.oracle.com/technetwork/database/database10g/documentation/database10gr2-087366.html

it worked for me
1239489356 461527463 63% 20200 files
bcm@bcm-laptop:~/Downloads/V10_docs$ ls
B19306_01.zip
bcm@bcm-laptop:~/Downloads/V10_docs$ ls -l
total 454056
-rw-r--r-- 1 bcm dba 464948533 2011-01-08 16:46 B19306_01.zip

Download problems Oracle Database 10g Express Edition

Completed download.
Attempted to start application but cannot find the server.
Removed the software using add/remove programs.
Attempted to reinstall but it seems that some applications are still on my system.
Attempted to remove the application but the add/remove program does not recognized the application
What can I do.

Hello,
I need to install "Oracle database 10g Express Edition" with different database name example dev but it is taking
default name that is XE and there is no option come during installation where i can put the name of database as per my desire.First, note that you can't install more than one instance of XE per server. Changing the instance name won't help you with that.
As you've already found out, the installer always creates a database instance with default names. That's part of the "Express" concept: As little configuration as necessary to get a Oracle Database installed with just a few clicks. The second advantage is, that you can also simplify the documentation, as you can forget about several aspects when you don't have to configure them...
Since you don't have tools like dbca in XE, your only option would be to rename the database once it's created. There are a few threads on that topic in this forum, e. g. {thread:id=403056}.
But before you start working on that, could you explain why exactly you have to use a different database/instance name?
And also explain why we use "Oracle database 10g Express Edition" instead of Oracle database 10g. what is the meaning of Express Edition.Why and how should we answer why you picked a certain edition? The most likely cause is license costs: XE is available for free, all others are just free as long as you use the OTN license...
For an overview, there is a [url http://www.oracle.com/us/products/database/enterprise-edition/comparisons/index.html]Comparison Matrix for Oracle Database Editions.
I'd furthermore ask why you still use 10g XE instead of the current 11g XE?
-Udo

Problem Downloading "Oracle Database 10g EX for Windows"

Hi,
When I try to download “Oracle Database 10g Release 2 (10.2.0.1) Express Edition for Microsoft Windows” I get message:
Internet Explorer cannot download OracleXE.exe from download.oracle.com.
The server returned an invalid or unrecognized response
I tried using Mozila and Opera, I got different message but no result.
Please help,
Dan

There is a dedicated forum for this kind of questions which is monitored by Oracle staff.
Discussion Forums » OTN Member Services » Downloads
Downloads Issues

Problem upgrading Apex 2.1 to 3.2.1 in Oracle Database 10g Express Edition

G'Day Apex gurus,
I installed Oracle Database 10g Express edition in my Windows XP PC which comes with Apex 2.1 with no problems. Then I wanted to upgrade Apex 2.1 to 3.2.1 (Currently Apex download in OTN) following the document below:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
I went to the steps:
@apexins SYSAUX SYSAUX TEMP /i/
Then to change the password for the admin account run apxchpwd.sql and when prompted enter a password for the ADMIN account.
@apxchpwd
with not problems
Then I connected to SQL*Plus as SYS by:
sqlplus /nolog
CONNECT SYS as SYSDBA
Enter password: xxxxxxxxxxx
but when I tried to run:
@APEX_HOME/apex/apxldimg.sql APEX_HOME
where APEX_HOME is Apex3.2.1 in my case
SQL> @Apex3.2.1/apex/apxldimg.sql Apex3.2.1 (I get the messages below)
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'Apex3.2.1/apex/images'
Directory created.
declare
*+
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the path specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at line 15
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.17
Directory dropped.
Can anyone help me in how to trouble shout this?
I tried to continue by following the steps document
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
but when I tried to login in:
http://localhost:8080/apex/f?p=4550:1
when I type the credentials
system
system
systempassword
nothing happens
or even If I try:
http://localhost:8080/apex/f?p=4550:10
admin
adminpassword
nothing happens here too.
I appreciate any help
Kind regards
Carlos

My database version is 10.2.0.1.0 Oracle express.
Operating system is Windows Vista.
I started installing using the following commands.
@ C:\temp\apex\apexins.sql
it prompts me for the values of sysaux sysaux temp and c:\temp\apex\images\
If I supply the value for images the sqlplus window closes after scrolling a lot of info.
Enroute it also prompts me for a value for 9:
I don't know what the input shall be.
Then it again stops at enter value for version:
I used 3.2.1.0
The window scrols a while and closes.
later I changed the password and ran the command.
@c:\temp\apex\apxldimg.sql c:\temp
but no success with installation.
the output is as following.
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Nov 27 18:13:43 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect system/sairam as sysdba;
Connected.
SQL> @ c:\temp\apex\apxchpwd
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
wwv_flow_security.g_security_group_id := 10;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
ORA-06550: line 4, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 4, column 5:
PL/SQL: Statement ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 8, column 23:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 7, column 15:
PL/SQL: SQL Statement ignored
ORA-06550: line 13, column 32:
PLS-00364: loop index variable 'C1' use is invalid
ORA-06550: line 12, column 9:
PL/SQL: Statement ignored
ORA-06550: line 19, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 19, column 5:
PL/SQL: Statement ignored
Commit complete.
SQL> @c:\temp\apex\apxldimg.sql c:\temp
PL/SQL procedure successfully completed.
Directory created.
if wwv_flow_utilities.db_version_is_at_least('11') then
ERROR at line 32:
ORA-06550: line 32, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 32, column 3:
PL/SQL: Statement ignored
PL/SQL procedure successfully completed.
if wwv_flow_utilities.db_version_is_at_least('11') then --11g only
ERROR at line 16:
ORA-06550: line 16, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 16, column 3:
PL/SQL: Statement ignored
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.32
Directory dropped.
SQL>
Does this require XE 11 or anything else.
This will happen even if I supply as following(closing of sqlplus in the begining).
@ C:\temp\apex\apexins.sql sysaux sysaux temp c:\temp\apex\images\
Any help.

Oracle Database 10g relase 1 Installation Problem on RHEL 3 ES

Dear all
I'm trying to install oracle database 10g r1 X86_64 on Intel Xeon Machine with EM64T technology with RHEL 3 ES update 2 X86_64 edition. The problem is described below :
Oracle OUI .runInstaller collapsed with such a following error:
An unexpected exception has been detected in native code outside the
VM.
Unexpected Signal : 11 occurred at PC=0x8077470
Function=[Unknown.]
Library=(N/A)
Is there anyone can help me ??

Check pushitz website and ensure that you have all the required rpms installed properly.
Check the log files in the installation directory. That should give some more details as to what exactly is going on.

Problem in starting SQL*PLUS in oracle database 10g

Hi
Well I am facing one problem while starting SQL*PLUS in oracle database 10g
ERROR - "Procedure entry point longjmp could not be located in dynamic link library orauts.dll"
This has happened when I installed Oracle Database 11g on same machine and when I deinstalled Oracle 11g then SQL*PLUS is started...no error came
Can anybody tell me the reason please...

hi
pls im having the same problem but in my own case i installed oracle apex using 11g.
im env variable is:
C:\Oracle\product\10.1.0\Client_1\bin;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin\client;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin;C:\app\Xty\product\11.2.0\dbhome_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\
pls which is my apex_home so i can interchange it?
i also have oracle 10g client installed

Problem with Character Set in Oracle database 10g

Hi,
I tried to import one tablespace into test server. Source server with Oracle 8i and Target server with Oracle database 10g. The error I get is
Import: Release 10.2.0.1.0 - Production on Thu Aug 3 00:20:49 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: sys as sysdba
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V08.01.07 via conventional path
About to import transportable tablespace(s) metadata...
import done in WE8DEC character set and AL16UTF16 NCHAR character set
export server uses WE8DEC NCHAR character set (possible ncharset conversion)
. importing SYS's objects into SYS
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 19736:
"BEGIN sys.dbms_plugts.beginImport ('8.1.7.4.0',2,'2',NULL,'NULL',67051,25"
"51,2); END;"
IMP-00003: ORACLE error 19736 encountered
ORA-19736: can not plug a tablespace into a database using a different national character set
ORA-06512: at "SYS.DBMS_PLUGTS", line 2386
ORA-06512: at "SYS.DBMS_PLUGTS", line 1946
ORA-06512: at line 1
IMP-00000: Import terminated unsuccessfully
PLZ somebody help in geting resolve this. Has anybody seen this error before.

The solution to this problem is described in MetaLink note #211920.1. But this note is published with LIMITED access as it involves using a hidden parameter.
You can get access to the note through Oracle Support only.
The problem itself is solved generically, if the source database is at least 10.1.0.3 and the target database is 10.2
-- Sergiusz

Check "Problem: Oracle Database 10g Release 2 can only be installed in new

Hi All
Installing 10g software on AIX Box in /oracle/oraHome2,where oracle9i is already installed in /oracle/oraHome1 and oracle inventory is in /oracle/inventory
In product specific prerequisite screen I am getting the
check:Oracle Home incompatibilties is failed I am getting the error
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: Oracle9i Database 9.2.0.1.0
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g Release 2 can only be installed in a new Oracle Home
Recommendation: Choose a new Oracle Home for installing this product
though I am installing it in different oracle homes why i am getting this error?
Is it because 10g installation is picking the same oracle inventory /oracle/inventory
do i need to make different oracle inventory for different oracle homes???????plz confirm..is thats the reason i am getting this error??????
Thanks inadvance
Gagan

I figure out you are trying to install 10gR2 on top of an existing 9iR2 Oracle Home. This is corrected at the Path definition window. Most probably you just click on the <Next> and by default the 9iR2 Oracle Home was selected. You must define a new oracle home for the 10gR2 install.
~ Madrid

Problem connect form6i and Oracle Database 10g

I can't connect form6i to Oracle Database 10g
When complete user/password@database fatal error produce:
"Oracle Forms Designer has encountered a problem and needs to close. We are sorry for the inconvenience"
Error Detail:
AppName: ifbld60.exe AppVer: 6.0.8.27 ModName: ora805.dll
ModVer: 0.0.0.0 Offset: 000b4f04
Product Install:
- Forms Version: Forms [32 bits] Versión 6.0.8.27.0
- Oracle Database: 10.2.0
- Win XP professional with SP2.
Any idea what might cause Forms to shutdown ubnormally?
Thanks

If your database is using the AL32UTF8 character set, Forms 6i cannot connect.
Read this thread:
connecting form 6i to oracle database 10G express edition

Unable to download Oracle Database 10g Release 1 (10.1.0.2)

Got following message when I tried to download
Oracle Database 10g Release 1 (10.1.0.2)
Server Error
The following error occurred:
[code=SERVER_RESPONSE_RESET] The server response could not be read because of an error. Contact your system administrator.
Is any solution available

Seems to be working fine. You can try any one of these links:
[url http://www.oracle.com/technology/software/htdocs/xe_lic_prod.html?http://download-west.oracle.com/otn/nt/oracle10g/xe/10201/OracleXE.exe]OracleXE.exe
[url http://www.oracle.com/technology/software/htdocs/xe_lic_prod.html?http://download-east.oracle.com/otn/nt/oracle10g/xe/10201/OracleXE.exe]OracleXE.exe
[url http://www.oracle.com/technology/software/htdocs/xe_lic_prod.html?http://download-uk.oracle.com/otn/nt/oracle10g/xe/10201/OracleXE.exe]OracleXE.exe

I have Installed Oracle Database 10g Express Edition so i have Problem.....

Hello Friends
I have Installed Oracle Database 10g Express Edition in "Ubuntu Linux" but i have Following Problems:
1.) After i installed Oracle Database 10g Express Edition i gone to
"Application" -> "Oracle Database 10g Express Edition" -> "Run SQL Command Line"
SQL Window has been opened there i have typed "SELECT * FROM tab;" here i got Warning Messg of
"SP2-0640: Not connected"
2.) From There i have Again gone to
"Application" -> "Oracle Database 10g Express Edition" -> "Start Database"
i got Warning Messg of "Operation Failed. venu is not a Member of DBA Group"
3.) Finally i want Solution For "How to get Connected in "Oracle Database 10g Express Edition"
Please Post the Answer As Soon As Possible ...
From Venu(INDIA)

Was the oracle-xe configure completed successfully?
Are the pmon and listener processes running ... set your environment and connect via sqlplus if so. If no processes, the instance needs a startup.
$ ps -ef |egrep pmon
oracle ... ora_pmon_XE
$ ps -ef |egrep lsnr # can also check the listener status, see below
oracle ... /usr/.../tnslsnr ...
$ lsnrctl status
Endpoints Summary ...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<your hostname>)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=http) ... (PORT=8080)))
...In the ORACLE_HOME/bin directory there is a shell script you can source to set up your environment variables for connecting to the database. The full path to the .sh should be revealed by the tnslsnr process, /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
$ /usr/.../oracle_env.sh
$ sqlplus /nolog
SQL> connect system
Password: ...
Connected.
SQL> select status from v$instance;
STATUS
OPENThe oracle user created by the configure won't have a known password set. Set it and switch user to the oracle login. If you don't want to muck about with the oracle user, at least add your user to the dba group so that you can connect with the sysdba privilege when needed.
Edited by: clcarter on Feb 22, 2011 7:06 AM

Problem about using Oracle Form 6i to connect Oracle Database 10g express.

Sorry to interrupt all of you.
I have encountered a problem about using Oracle Form 6i to connect Oracle Database 10g express.
As I would like to
I use Oracle Net8 Easy Config to create a connection.
According to "tnsnames.ora", the paramater of connection is as follows;
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA = (SID = XE))
Unfortunately, when I use Oracle Net8 Easy Config to test the connection, an error message is prompted as follows:
Connecting....
The test did not succeed.
ORA-03106: fatal two-task communication protocol error
There may be an error in the fields entered
or the server may not be ready for a connection.
You can check the server and retry, or continue.
After I google it, I still have no idea how to solve the problem. I would like to ask, could anyone mind providing some hints or solution to address the issues.
Thanks for your assistance in advance.

I don't believe the Net8 Easy Config (NEC) will create a compatible entry in the tnsnames.ora. I have Forms 6i running successfully against a 10g Express database, but I did not use the NEC - I created the entry myself. Here is the entry I use:
XE=
(DESCRIPTION=
    (ADDRESS=
      (PROTOCOL=TCP)
      (HOST=<<servername or IP address>>)
      (PORT=1521)
    (CONNECT_DATA=
      (SERVER=dedicated)
      (SERVICE_NAME=XE)
)Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Oracle Database 10g r2 download problems

Similar Messages

Maybe you are looking for