Oracle database 9.2.0.8 patchset upgrade from 9.2.0.3
Hi,
i have a situation where i upgraded the Oracle software with database as per metalink documentation from 9.2.03 to patchset 9.2.0.8 (Oracle9i Patch Set Release 2 (9.2.0.8) Patch Set 7 for HP-UX PA-RISC (64-Bit) ) (README for 4547809 )
but i could see the $ORACLE_HOME/bin binaries are still at 9.2.0.3, and so v$version dba_registry pointing to same.
i have pasted few lines of patch installation log from Inventory
<------snip----------->
Oracle Universal Installer version is 10.1.0.5.0
Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
*** Welcome Page***
Initializing install inventory
Setting up install inventory
*** Specify File Locations Page***
Setting the 'SourceLocation ( FROM_LOCATION )' property to '/u01/h3a/h3a_ora2/9208/Disk1/stage/products.xml'. Received the value from the UI p
age.
Setting the 'OracleHome ( ORACLE_HOME )' property to '/h3a/h3a_ora2/oracle/product/9.2.0'. Received the value from the UI page.
Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OUIHome3'. Received the value from the UI page.
Warning:*** Alert: You have specified a non-empty directory to install this product. It is recommended to specify either an empty or a non-exi
stent directory. You may, however, choose to ignore this message if the directory contains Operating System generated files or subdirectories
like lost+found.
Do you want to proceed with installation in this Oracle Home? ***
User Selected: Yes/OK
Initializing OUI access setup
Setting variable 'ORACLE_HOME' to '/h3a/h3a_ora2/oracle/product/9.2.0'. Received the value from the UI page.
Setting the PROD_HOME variable of 'oracle.java.jdbc.thin14_9.2.0.1.0' to '/h3a/h3a_ora2/oracle/product/9.2.0/oracle_java_jdbc_thin14'. Receive
d the value from the variable calculation.
Setting the PROD_HOME variable of 'oracle.swd.jre_1.4.2.0.0' to '/h3a/h3a_ora2/oracle/product/9.2.0/jre/1.4.2'. Received the value from the va
riable calculation.
Setting the PROD_HOME variable of 'oracle.swd.opatch_10.1.0.5.0' to '/h3a/h3a_ora2/oracle/product/9.2.0/OPatch'. Received the value from the v
ariable calculation.
Setting the PROD_HOME variable of 'oracle.swd.oui_10.1.0.5.0' to '/h3a/h3a_ora2/oracle/product/9.2.0/oui'. Received the value from the variabl
e calculation.
Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.1.0.5.0' to '/h3a/h3a_ora2/oracle/product/9.2.0/oui'. Received the value from the va
riable calculation.
Unable to read /h3a/h3a_ora2/oracle/product/9.2.0/inventory/ContentsXML/comps.xml. Some inventory information may be lost.
# The patch iSQL*Plus Patch 9.2.0.8.0 has not been selected for installation because the base component is neither installed nor in the stagi
ng area.
# The patch oracle.apache.isqlplus 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for installat
ion.
# The patch Oracle Text Patch 9.2.0.8.0 has not been selected for installation because the base component is neither installed nor in the sta
ging area.
# The patch oracle.cartridges.context 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for instal
lation.
# The patch Oracle interMedia Locator Patch 9.2.0.8.0 has not been selected for installation because the base component is neither installed
nor in the staging area.
# The patch oracle.cartridges.locator 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for instal
lation.
# The patch Oracle JDBC Development Drivers Patch 9.2.0.8.0 has not been selected for installation because the base component is neither inst
alled nor in the staging area.
# The patch oracle.java.jdbc.jdbc_dev 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for instal
lation.
# The patch JDBC/OCI Common Files Patch 9.2.0.8.0 has not been selected for installation because the base component is neither installed nor
in the staging area.
# The patch oracle.java.jdbc.oci_common 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for inst
allation.
Performing operation for OUI access setup
CRS clusterware not found. Defaulting to vendor clusterware.
Vendor clusterware is not detected.
This is not a cluster system.
Node selection page will not be shown.
Setting variable 'CLUSTER_NODES' to ''. Received the value from a code block.
*** Select a Product to Install Page***
Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.server, 9.2.0.8.0, >9.2.0.8.0, [ ][OH:2]'. Received the value from the default
settings.
*** Select Installation Type Page***
Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.
Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Custom,'. Received the value from the default settings.
No prerequisite checks specified for this installation.
# The patch oracle.options.ano.nis 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for installation.
# The patch could not be found in the staging area.
# The patch Authentication and Encryption Patch 9.2.0.8.0 has not been selected for installation because the base component is neither instal
led nor in the staging area.
# The patch oracle.options.ano.sns 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for installat
ion.
# The patch Oracle Wallet Manager Patch 9.2.0.8.0 has not been selected for installation because the base component is neither installed nor
in the staging area.
# The patch oracle.options.ano.ssl.owm 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for insta
llation.
# The patch Oracle interMedia Client Compatibility Files Patch 9.2.0.8.0 has not been selected for installation because the base component is
neither installed nor in the staging area.
# The patch oracle.options.intermedia.imclient.imclicompat 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not bee
n selected for installation.
# The patch Oracle interMedia Common Files Patch 9.2.0.8.0 has not been selected for installation because the base component is neither insta
lled nor in the staging area.
# The patch oracle.options.intermedia.imcom 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for
installation.
# The patch Oracle interMedia Java Advanced Imaging Patch 9.2.0.8.0 has not been selected for installation because the base component is neit
her installed nor in the staging area.
<--------------->
OPatch lsinventory for upgraded ORACLE_HOME returns
PRODUCT NAME VERSION
============ =======
Installer SDK Component 10.1.0.5.0
Oracle 9iR2 Patch Set 9.2.0.8.0
Oracle Universal Installer 10.1.0.5.0
There are 3 components installed.
There is no Interim Patch
any idea what went wrong here?
regards
Deepak.
Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.Any reason for going in for custom installation?
Similar Messages
-
Oracle database not getting Up after patch upgrade
Hi,
I have upgraded my oracle database from 10.0.2.1 to 10.0.2.4. after this databse is not coming up. I am able to start/stop listner but while starting SAP it is not able to start databse. Pasting error log below.
Wed Jun 24 14:56:45 PDT 2009
LOGFILE FOR STARTING ORACLE
Trying to start CRD database ...
Wed Jun 24 14:56:45 PDT 2009
checking required environment variables
ORACLE_HOME is >/oracle/CRD/102_64<
ORACLE_SID is >CRD<
Wed Jun 24 14:56:45 PDT 2009
check initora
Wed Jun 24 14:56:45 PDT 2009
check initora
Wed Jun 24 14:56:45 PDT 2009
checking V2 connect
TNS Ping Utility for Linux: Version 10.2.0.4.0 - Production on 24-JUN-2009 14:56:45
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/usr/sap/CRD/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = CRM) (PORT = 1527))) (CONNECT_DATA = (SID =
CRD) (GLOBAL_NAME = CRD.WORLD)))
OK (0 msec)
tnsping: V2 connect to CRD
Wed Jun 24 14:56:45 PDT 2009
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Wed Jun 24 14:56:45 PDT 2009
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Wed Jun 24 14:56:45 PDT 2009
starting database
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Jun 24 14:56:45 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1224736768 bytes
Fixed Size 2083560 bytes
Variable Size 620758296 bytes
Database Buffers 587202560 bytes
Redo Buffers 14692352 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Wed Jun 24 14:56:53 PDT 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
/usr/sap/CRD/SYS/exe/run/startdb: Terminating with error code 12
thanks,
BhanuHi,
I have tried to start and stop oracle from SPLplus but no luck. i am pasting alert log file which is saying some block courruption......
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 80
sessions = 96
event = 10191 trace name context forever, level 1
sga_max_size = 1224736768
shared_pool_size = 587202560
shared_pool_reserved_size= 57982058
filesystemio_options = setall
control_files = /oracle/CRD/origlogA/cntrl/cntlrCRD.dbf, /oracle/CRD/origlogB/cntrl/cntrlCRD.dbf, /oracle/CRD/sapdata1/cntrl/cntrlCRD.dbf
control_file_record_keep_time= 30
db_block_size = 8192
db_cache_size = 587202560
compatible = 10.2.0
log_archive_dest = /oracle/CRD/oraarch/CRDarch
log_buffer = 14246912
log_checkpoint_interval = 0
db_files = 254
log_checkpoints_to_alert = TRUE
dml_locks = 4000
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
recyclebin = off
remote_os_authent = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes = 1
background_dump_dest = /oracle/CRD/saptrace/background
user_dump_dest = /oracle/CRD/saptrace/usertrace
core_dump_dest = /oracle/CRD/saptrace/background
optimizer_features_enable= 10.2.0.1
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = CRD
open_cursors = 800
optimpeek_user_binds = FALSE
pga_aggregate_target = 773094113
workarea_size_policy = AUTO
statistics_level = typical
PMON started with pid=2, OS id=25204
PSP0 started with pid=3, OS id=25206
MMAN started with pid=4, OS id=25208
DBW0 started with pid=5, OS id=25210
LGWR started with pid=6, OS id=25212
CKPT started with pid=7, OS id=25214
SMON started with pid=8, OS id=25216
RECO started with pid=9, OS id=25218
CJQ0 started with pid=10, OS id=25220
MMON started with pid=11, OS id=25222
MMNL started with pid=12, OS id=25224
Wed Jun 24 15:06:19 2009
ALTER DATABASE MOUNT
Wed Jun 24 15:06:24 2009
Setting recovery target incarnation to 1
Wed Jun 24 15:06:24 2009
Successful mount of redo thread 1, with mount id 182910572
Wed Jun 24 15:06:24 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Wed Jun 24 15:06:24 2009
ALTER DATABASE OPEN
Wed Jun 24 15:06:24 2009
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Wed Jun 24 15:06:24 2009
Started redo scan
Wed Jun 24 15:06:24 2009
Completed redo scan
1 redo blocks read, 0 data blocks need recovery
Wed Jun 24 15:06:24 2009
Started redo application at
Thread 1: logseq 16126, block 2, scn 1104239482
Wed Jun 24 15:06:24 2009
Recovery of Online Redo Log: Thread 1 Group 2 Seq 16126 Reading mem 0
Mem# 0: /oracle/CRD/origlogB/log_g12m1.dbf
Mem# 1: /oracle/CRD/mirrlogB/log_g12m2.dbf
Wed Jun 24 15:06:24 2009
Completed redo application
Wed Jun 24 15:06:24 2009
Completed crash recovery at
Thread 1: logseq 16126, block 3, scn 1104259484
0 data blocks read, 0 data blocks written, 1 redo blocks read
Wed Jun 24 15:06:25 2009
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=25232
Wed Jun 24 15:06:25 2009
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=17, OS id=25234
Wed Jun 24 15:06:25 2009
Thread 1 advanced to log sequence 16127 (thread open)
Thread 1 opened at log sequence 16127
Current log# 3 seq# 16127 mem# 0: /oracle/CRD/origlogA/log_g13m1.dbf
Current log# 3 seq# 16127 mem# 1: /oracle/CRD/mirrlogA/log_g13m2.dbf
Successful open of redo thread 1
Wed Jun 24 15:06:25 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Wed Jun 24 15:06:25 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Wed Jun 24 15:06:25 2009
ARC1: Becoming the heartbeat ARCH
Wed Jun 24 15:06:25 2009
SMON: enabling cache recovery
Wed Jun 24 15:06:25 2009
Errors in file /oracle/CRD/saptrace/usertrace/crd_ora_25226.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Wed Jun 24 15:06:25 2009
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Instance terminated by USER, pid = 25226
ORA-1092 signalled during: ALTER DATABASE OPEN...
Thanks,
Bhanu -
"Database logon failed" error received after upgrading from CR XI to CR 200
We have a bunch of reports that use ttx files and datasets. The code to support this was written and compiled originally using .NET 2.0 and CR XI. After recompiling using .NET 3.5 and CR 2008 (not the version that came with VS2008), when I run the reports, I now receive an error "Database logon failed". after clicking throught he error, I am prompted to enter a username and password. Just for the heck of it, I entered my database userame and password with no luck. I cancelled out of the login dialog and the frae of the report appeared but no report. No code was changed. How do I fix this?
I know that I should convert the reprots to use xml schema files but I have over 300 reports and this will take time. I need to get this fixed ASAP. After I get this running, I can then [leisurely] fix the reports and use xsd files.Since the reports were create off of ttx files, they would be expecting a recordset at that time. How are you passing the data to the reports with CR 2008 and VS 2008?
Also, see the following:
[1468232 - How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433363338333233333332%7D.do]
[1468232 - How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433363338333233333332%7D.do]
And don't forget to search these forums - a fair amount of info in this topic here. The search box in the top right corner of this web page will also give you a number of blogs, KBases, wikis articles and more. E.g.; the search term "ttx net crystal", brought up the above two KBases (along with a number of other content).
Oh. If this is critical, remember you always have the option of creating a phone case;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Oct 7, 2011 7:04 AM -
Where can I get Oracle database server 9i for windows 2003
Hi,
I need Oracle Database Server 9i for Windows 2003. From Oracle online download, there is one a patch set available. Where can I get the full version?
Thanks
LauraHi, I found the solution. There is no software to direcly install Oracle 9i on Windows 2003. I need to install the software for NT/2000 first, the patch it.
That's why there is only patchset for 2003 for downloading. See the doc below:
three installation components required to install
Oracle9i Database release 2 (9.2.0.3.0) on Windows Server 2003. These three
installation components must be installed in the order listed. If you are
migrating a pre-existing Oracle9i database to Windows Server 2003, first
upgrade the database to the Oracle9i Database release 2 (9.2.0.3.0) patch set
before upgrading the operating system.
Obtain the following installation components:
Oracle9i Database Release 2 (9.2.0.1.0) for Windows
Oracle Universal Installer release 2.2.0.18.0 for Windows
Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows -
Getting oracle db 10.1.0.3 patchset
I need to install the oracle database 10.1.0.3 patchset.. but i can't log into the site of metalink coz i need a CSI... does anybody have an idea how to bypass this??????
NEED IT BADLYYYYYYYDear boodito,
this is the patchset u need hope so.
save the below lines as rhel3_pre_install.sh and run it.
#!/bin/bash
USER=`whoami`
if [ $USER != root ]; then
echo "Must be root to run this script, please login as root and re-try"
exit
fi
# see if libcwait.so is already being loaded
if [ -f "/etc/ld.so.preload" ] && [ -n "`grep libcwait /etc/ld.so.preload`" ]; then
echo "Patch has already been applied"
exit
else
echo "Applying patch..."
fi
cat << EOF |
#include <errno.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <sys/wait.h>
pid_t
__libc_wait (int *status)
int res;
asm volatile ("pushl %%ebx\n\t"
"movl %2, %%ebx\n\t"
"movl %1, %%eax\n\t"
"int \$0x80\n\t"
"popl %%ebx"
: "=a" (res)
: "i" (__NR_wait4), "0" (WAIT_ANY), "c" (status), "d" (0), "S" (0));
return res;
EOF
gcc -O2 -shared -fpic -xc - -o /etc/libcwait.so
echo "/etc/libcwait.so" >>/etc/ld.so.preload
echo "Ensuring permissions are correctly set..."
chown root.root /etc/libcwait.so /etc/ld.so.preload
chmod 755 /etc/libcwait.so
chmod 444 /etc/ld.so.preload
echo "Done."
echo "Patch successfully applied"
------------------------------------------------------------------ -
AIX 6 and Oracle database 10g/11g
Dear All,
We are planning to upgrade our OS from AIX 5.3 to AIX 6.1 and infact have upgraded couple of servers to 6.
In light of cost saving/cutting, how can AIX 6 help reduce licensing fee for Oracle databases. In other words, we would like to look into possibilities of reducing Oracle database (10g/11g) licensing fee by upgrading OS to AIX 6.
Will the new feature like CPU virtualization be helpful in this regard? Are there any other features which could be worth looking into?
I would be grateful if any of you could shed some light on this.
RegardsDear All,
We are planning to upgrade our OS from AIX 5.3 to AIX 6.1 and infact have upgraded couple of servers to 6.
In light of cost saving/cutting, how can AIX 6 help reduce licensing fee for Oracle databases. In other words, we would like to look into possibilities of reducing Oracle database (10g/11g) licensing fee by upgrading OS to AIX 6.
Will the new feature like CPU virtualization be helpful in this regard? Are there any other features which could be worth looking into?
I would be grateful if any of you could shed some light on this.
Regards -
Is it really necessary to Upgrade from Oracle EBS R11i to R12?
Hi,
Oracle Applications 11.0.3 (Oracle Financials) was implemented in our company and later in 2006 it was upgraded to 11.5.10 (with new implementation of Supply Chain Management Module - INV,OM and PO) and 2 months ago we upgraded it to 11.5.10.2+DB 11gR2.
I've been recommending to upgrade to R12 but the Finance Users are reluctant for an upgrade and of the opinion that the R12 has many bugs and there will be issues after upgrade to R12.
Once of the consultant is of the opinion that its better to re-implement R12 instead of Upgrade. He also tells me that R12 does not have sub-accounting and sub-ledger and trial balance reports in AP.Since I am not a Functional Consultant I could not comment on this.
Please advice if there are any useful docs which address the upgrade to R12 issues which I can share with our consultant and users.
I am currently going thru +Upgrade Advisor: Oracle E-Business Suite Financials and Projects Upgrade from 11.5.10.2 to 12.1.3 and 12.1.2 [ID 256.1]+
Rgds,
Thiruuser1983888 wrote:
Hi,
Oracle Applications 11.0.3 (Oracle Financials) was implemented in our company and later in 2006 it was upgraded to 11.5.10 (with new implementation of Supply Chain Management Module - INV,OM and PO) and 2 months ago we upgraded it to 11.5.10.2+DB 11gR2.
I've been recommending to upgrade to R12 but the Finance Users are reluctant for an upgrade and of the opinion that the R12 has many bugs and there will be issues after upgrade to R12.
R12.1.x is a stable release that many customers (including Oracle themselves) have upgraded to.
Once of the consultant is of the opinion that its better to re-implement R12 instead of Upgrade. He also tells me that R12 does not have sub-accounting and sub-ledger and trial balance reports in AP.Since I am not a Functional Consultant I could not comment on this.
The Finance modules have been completely re-written and fucntionality had changed for the better. Re-implementation typically costs upto 3 times more than a upgrade. Re-implementation is not necessary if the business model and process have not changed. What are the consultants justifications for doing a re-implementation (other than making more money) ?
Please advice if there are any useful docs which address the upgrade to R12 issues which I can share with our consultant and users.
I am currently going thru +Upgrade Advisor: Oracle E-Business Suite Financials and Projects Upgrade from 11.5.10.2 to 12.1.3 and 12.1.2 [ID 256.1]+
Pl see the Docs referenced in MOS Doc 850008.1 (Interesting Documents Concerning E-Business Suite 11i to R12 Upgrades)
Rgds,
ThiruHTH
Srini -
Using JDBC Adapter posting data from Oracle database to Falt file????
Hi All,
By using JDBC adapter, for now I have to connect to Oracle Database and then get the employee information from the Employee Table and post it to the flat file, can you please help me out the complete procedure...
Thanks in advance
AndyHi Andy,
have a look at the help for configuring a JDBC Sender adapter: http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
It mentions all the settings you'll need to make e.g. the connection URL as posted above.
And it also lists how an XML file looks like that contains the query results according to the SQL Select statement in the adapter.
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
</resultset>
So you have to create a datatype, message type and message interface to match this structure (of course you'll need to substitute column-name1 etc. with the column names in your select statement).
Now if you want to create a flat file from that, you have to create an XML representation of that flat file and use the content conversion in the receiver file adapter as defined here: http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards
Christine -
Export import - using TOAD FOR ORACLE and ORACLE DATABASE 10G EXPRESS or s
Hi all,
Could you please kindly help me?
I am using TOAD FOR ORACLE to export a table to flat file A. The tool just supports to distinguish fields by "spaces".
And the web page of ORACLE DATABASE 10G EXPRESS to import the data from flat file A to another database. To load data to a table from a text file, the web page bases on "comma" to distinguish fields.
So could you have any suggestion for me? I need to export data via TOAD FOR ORACLE. And then import it to another database by the home page of ORACLE DATABASE 10G EXPRESS or sqlplus.
Thank you so much for your help!Dont use TOAD for exporting your data. Use PL/SQL. Below is the code given in Asktom.com that does what you want.
create or replace function dump_csv( p_query in varchar2,
p_separator in varchar2 default ',',
p_dir in varchar2 ,
p_filename in varchar2 )
return number
is
l_output utl_file.file_type;
l_theCursor integer default dbms_sql.open_cursor;
l_columnValue varchar2(2000);
l_status integer;
l_colCnt number default 0;
l_separator varchar2(10) default '';
l_cnt number default 0;
begin
l_output := utl_file.fopen( p_dir, p_filename, 'w' );
dbms_sql.parse( l_theCursor, p_query, dbms_sql.native );
for i in 1 .. 255 loop
begin
dbms_sql.define_column( l_theCursor, i, l_columnValue, 2000 );
l_colCnt := i;
exception
when others then
if ( sqlcode = -1007 ) then exit;
else
raise;
end if;
end;
end loop;
dbms_sql.define_column( l_theCursor, 1, l_columnValue, 2000 );
l_status := dbms_sql.execute(l_theCursor);
loop
exit when ( dbms_sql.fetch_rows(l_theCursor) <= 0 );
l_separator := '';
for i in 1 .. l_colCnt loop
dbms_sql.column_value( l_theCursor, i, l_columnValue );
utl_file.put( l_output, l_separator || l_columnValue );
l_separator := p_separator;
end loop;
utl_file.new_line( l_output );
l_cnt := l_cnt+1;
end loop;
dbms_sql.close_cursor(l_theCursor);
utl_file.fclose( l_output );
return l_cnt;
end dump_csv;
/Here is the link to this thread in asktom.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:95212348059 -
Differences between different versions of Oracle Database 10 g
I have some questions about the Oracle Database 10g Release 2 that we download from Oracle web site.
1)Does the software that we download from Oracle web site is similar to Enterprise Edition or Standard Edition or Standard Edition One or to which edition? In other words, similar to which edition?
2)What are the differences between Enterprise, Standard, and Standard Edition one?
3)Are they any features included in the licensing Oracle Database that does not include in the free one that we download from Oracle web site?The dowloaded software contains every of the four editions. You choose which edition you want during the installation process.
The differences and extra-cost options are described in this paper on OTN
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family_0605.pdf -
Connect ODI12c to Oracle Database in Cloud
Hi,
Could anyone throw some light on how to connect ODI12c to Oracle and Non-Oracle Database hosted on Private or Public Cloud from on premise ODI12c instance?
I have read an article by David Alan, explains connecting through SSL Tunnel. Is it the only way? Is there any out-of-the-box method to connect to Cloud?
I have also read the white paper by Oracle, which says ODI can be used for data integration with cloud. But, How?
Thanks in advance.
Thanks & Regards,
MTRight now there's no other way to connect in the cloud DB other than sql developer, but you don't need a tunnel to connect with it.
You need just to configure your connection with you sftp info and it will work.
Take a look in this article that's very useful.
http://docs.oracle.com/cloud/latest/dbcs_schema/CSDBU/GUID-3B14CF7A-637B-4019-AAA7-A6DC5FF3D2AE.htm#CSDBU177
Hope this can help you. -
What is Oracle database current Java version
How do tell what version of Java my Oracle database is using.
I check select * from dba_registery, but no luck; I know the latest java version is 1.6.Here is what they have below, but when I execute the sql, it hung and have to cancel:
create or replace procedure java_props
as language java name 'props.show_props()';
show errors
connect / as sysdba
exec dbms_java.grant_permission( 'SCOTT','java.util.PropertyPermission','*','read,write');
commit;
connect scott/tiger
set serveroutput on size 10000
exec dbms_java.set_output(10000)
exec java_props -
Upgrade from 11i projects to r12 projects
Can anyone provide me with a document on how to upgrade from existing 11i projects to R12 projects?
Or if you let me know the pre-requisites that would be of great help me to me.You will need to follow the standard R12 upgrade process. You will first need to upgrade to 12.1.1 (http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121upgrade.pdf), then apply the R12.1.3 patch (MOS Doc 1081434.1- Oracle Projects Release 12.1.3 Readme)
MOS Doc 256.1 (Upgrade Advisor: Oracle E-Business Suite Financials and Projects Upgrade from 11.5.10.2 to 12.1.3 and 12.1.2) may also be relevant.
HTH
Srini -
Steps to upgrade oracle database from11.2.0.1 to 11.2.0.3 on Windows 2003 3
Hi,
Upgrade steps
1. Install 11.2.0.3.0 rdbms software
11.2.0.3 patch set is a full release.
Beginning with the release 11.2.0.3 patch set, you have two ways to apply a patch set
i)Out-of-place upgrade (Recommended) -- 11.2.0.3 will be installed as standalone at another location. So there is no impact on source oracle home and also DB upgrade will take less time
See Note 1276368.1 : Complete checklist for out-of-place manual upgrade from 11.2.0.1 to 11.2.0.2 , it is applicable for 11.2.0.3 as well
ii)in-place upgrade - 11.2.0.3 will be installed on top of 11.2 installation, So source oracle home will be replaced, Downtime will be high comparing out of place upgrade
for more info, Please refer to
Note 1189783.1 Important Changes to Oracle Database Patch Sets Starting With 11.2.0.2
11.2.0.3.0 software can be downloaded from My Oracle support: patch 10404530
https://updates.oracle.com/download/10404530.html
Please select your platform before downloading (Click on "Platform or Language" drop down menu)
if the platform name contains (32-bit) then it's 32-bit 11.2.0.3 client version
To install 11.2.0.3, you must download both p10404530_112020_<platform>_1of7.zip
and p10404530_112030_<platform>_2of7.zip
<platform> = your platform( ie for linux x86, download p10404530_112030_LINUX_1of7.zip and
p10098816_112030_LINUX_2of7.zip )
Note 1194734.1 : Where do I find that on My Oracle Support (MOS) [Video]
Note 549617.1 : How To Verify The Integrity Of A Patch/Software Download? [Video]
Note 169706.1 : Oracle Database Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2)
2) Finish the post installation steps as per the patchset README (readme.html).
3) upgrade the database to 11.2.0.3
Kindly ensure source database has all Valid DB components(dba_registry) and there are no invalid sys/system objects
Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
Note 837570.1 : Complete Checklist for Manual Upgrades to 11gR2 (applicable to 11.2.0.3)
Note.870814.1 : Complete checklist to upgrade the database to 11gR2 using DBUA (applicable to 11.2.0.3)
4) After db upgrade, you can apply PSU patch of 11.2.0.3, it will give latest bug fixes of 11.2.0.3
The latest PSU patch is (Reference: Quick Reference To Patch Numbers For Database PSU, CPU And Bundle Patches (Doc ID 1454618.1))
14727310 (11.2.0.3.5) Jan 2013 DATABASE 11.2.0.3
Patch readme file has Installation instructions.
Oracle Database Upgrade Path Reference List (Doc ID 730365.1)
Thanks,
Krishna -
Upgrading from Oracle database 10.1.0.2 to 10.2.0.3
Hello
I'm new to oracle database installations. I'm trying to upgrade from 10.1.0.2 to 10.2.0.3 but have no clue on how to do it...
What must i do and where can i download the necessary executables? Metalink?
I thank in advance all your help!
Best regardsOK,
This is an upgrade from 10g Rel 1 to 10g Rel 2 plus the 10.2.0.3.0 patchset. It means you will have to perform these operation>
0. Perform a full backup of your current environment.
1. Install 10gR2 on a separate Oracle Home.
2. Apply the 10.2.0.3.0 patchset on top of this new oracle installation.
3. Perform the database upgrade process to upgrade your database from 10gR1 to 10gR2-3
This is not an upgrade guide and there are a lot of details you must consider prior to actually executing this procedure, I suggest you to read the 10gR2 upgrade guide you can find here --> http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/toc.htm
~ Madrid
http://hrivera99.blogspot.com/
Maybe you are looking for
-
Got an IPad mini for Xmas. My home network runs off a BT Home Hub. I can't get the iPad to recognise or connect to the wifi network despite a strong signal. The device recognises the presence of a BT Network but keeps asking lots of nonsene stuff -
-
How to activate formatted search
Hi, I want to activate a formatted search when I open a form. Is that possible? Thanks Fabio
-
Combining multiple Outlook emails to PDF
Acrobat XI Pro acts like it's convertingthe files normally, showing the "Creating Adobe PDF" box with the little progress bar, and then, at the end of the conversion process, up pops this: I have Flash Player already, so this is puzzling to me. Also,
-
hi all, my desktop died yesterday, try hard, can't reboot it , today try install everythind on other desktop, when I install Nebean 6.5 , when I click add server the chose server did not pop up, or I can said click add server ,not respone at all. wha
-
Recovery not effective...
I have an HP Laptop, that started acting up by saying "Preparing Automatic Repair" and would go to a black screen. So i ordered the recovery discs, and tried to do a recovery. I tried going into the BIOS and making the appropriate adjustments, so the