Oracle Database at Novel Netware and D2K at Windows Machine

One of our clients are asking Combination of Oracle Database at Novel netware and Developer 2000 at Windows machine , please send us the comments whether the above combination is possible

Hello,
yes it is possible, we are having oracle 8.04 running on Netware 5.0 with Win98 clients using D2K.
However further versions of oracle e.g. 8i,9i etc are not available and never going to be available on netware.
hence we are migratiing to Win2K Adv server.
regards.
<BLOCKQUOTE>quote:<HR>Originally posted by [email protected]:
One of our clients are asking Combination of Oracle Database at Novel netware and Developer 2000 at Windows machine , please send us the comments whether the above combination is possible<HR></BLOCKQUOTE>
null

Similar Messages

Can i use "Oracle Database 12c: Performance Management and Tuning " training for getting certification on "Oracle Database 11g: Performance Tuning 1Z0-054"

i have taken "Oracle Database 12c: Performance Management and Tuning new" training from oracle university. Now i would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054" exam. Is it possible ?

I essentially endorse and refer you to Matthews' and John's post above.
I would differ with slightly with Matthew because my guess is you would often be able to use like for like 12c training for an 11g certification ( I believe there are precedents). BEFORE ANYONE ASKS THE OTHER WAY DOESN'T HAPPEN.
.... but totally concur with Matthew you would ill advised to procede on that basis without one of:
- This being advertised as possible on the website : e.g. https://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=654&get_params=p_id:169 ... option 2 show courses.
- Confirmation from Brandye
- Confirmation from an Oracle Certification Support Web Ticket ( http://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP )
... The more common (and in my opinion usually better) way would be get your 11g DBA OCP ( or higher first) and then take the 1z0-054. I am almost certain they will accept your 12c course for the 11g DBA OCP.
If you are choosing the route of not being a 11g (or 12c ) DBA OCP first but are on option 2 and relying on the course for certification then the issue is more in the balance and you are even more strongly advised to get confirmation before proceding (remember if the rules need to be changed for you only then any profit out of the exam is lost).
In general my understanding is Oracle would prefer to encourage people to train on the latest version of product that is available for training and will prefer to avoid restrictions which would cause you to train at a lower version. ( This is simply my guess at Oracle University Policy ... personal opinion only).
Having said all I have said I'd encourage you to go with the advice of the earlier two posts.

I export dump from oracle database 8.1.7 and try to import in 10.2.0. while import its prompt error

I export dump from oracle database 8.1.7 and try to import in 10.2.0. while import its prompt error as follow
8.1.7
SQL> select * from nls_database_parameters where parameter like '%SET%';
PARAMETER                      VALUE
NLS_CHARACTERSET               US7ASCII
NLS_NCHAR_CHARACTERSET         US7ASCII
10.2.0
SQL> select * from nls_database_parameters where parameter like '%SET%';
PARAMETER                      VALUE
NLS_NCHAR_CHARACTERSET         AL16UTF16
NLS_CHARACTERSET               WE8MSWIN1252
C:\Documents and Settings\Administrator>imp system/manager file=H:\CGlByte\cglby
te_03-07-2013Wed.dmp fromuser=system touser=cglbyte ignore=y
Import: Release 10.2.0.4.0 - Production on Thu Jul 4 16:11:49 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Produc
tion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V08.01.07 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8MSWIN1252 character set (possible charset conversion)
export client uses WE8ISO8859P1 character set (possible charset conversion)
export server uses US7ASCII NCHAR character set (possible ncharset conversion)
Import terminated successfully without warnings.
Pl suggest remedy
Regards,

8.1.7
AMERICAN_AMERICA.WE8ISO8859P1
10.2.0
AMERICAN_AMERICA.WE8MSWIN1252
exp system/manager file=d:\cgl.dmp owner=cgl, even i set character set before export but no impact

Desupport Documnetation for Oracle database 9.2.0 and 10g

Desupport Documnetation for Oracle database 9.2.0 and 10g , does any one know where I can get the doc for desupport dates for oracle 9.2.0 and 10g. Please sent me email on [email protected]
Thanks in Advance
Regards,
Nadeem Khan

Àll available on Metalink , just search for desupport.

Problem in installing Oracle database 10.2.01 and SOA suite


Hi ALL,
I have the following two problems.
I get a windows error saying "oui.exe has encountered a problem and needs to close. We are sorry for the inconvinience" whenever i try to install Oracle database 10.2.01.(problem 1)
However, i used the Oracle database from other system and installed SOA suite on my system. It was working fine until recently when it failed to start. I had only one option i.e. to deninstall the SOA suite.(i used the oracle deinstaller to deinstall the SOA suite) . When i tried to reinstall it again, i got a warning saying "DHCP configuration was detected on this host. The installer also detected that the local host name and the network hostname differ". When i ignored this warning and continued the installation, the set up falied to detect the Oracle database which i had used earlier(problem 2). Do I need to clear any logs or do i have any way to sort out these two problems. Please help. ?:|



i am trying to install the SOA SUite against locahost. I have installed the loop back adapter but facing the same problems that i used to face earlier.

Free Report Writer for Oracle Database except Crystal Report and Data Vison

Dear All,
I want Free Report Writer for Oracle Database except Crystal Report and Data Vision software.
Wr are working on Linux and windows both platform.
Any one have direct link or website address for it ?
Regards,
Vipul Patel
Ahmedabad

Please check the following link -
http://www.google.co.in/search?client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&channel=s&hl=en&q=open+source+report+writer+for+oracle&meta=&btnG=Google+Search
Regards.
Satyaki De.

Problems with Oracle Database 10g Express Edition and JBoss

Hi all,
I try to use Oracle Database 10g Express Edition and JBoss, but sometimes i have a connection problems.
Sometimes i have starnge warning:
WARN [JBossManagedConnectionPool] Unable to fill pool
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
and:
org.jboss.util.NestedSQLException: Could not create connection; - nested throwable: (java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
Oracle Database 10g Express Edition support Distributed Transaction Processing (DTP) XA interface or not?
Some ideas?
Thanks in advance!
Stoyan

Hi,
yes, it will work, but only with the Western European Edition, not the Unicode release.
See this thread for details:
Re: Connection error from SqlPlus 8.0 to Oracle XE in the same computer
Regards,
~Dietmar.

Difference between Oracle database 10.2.01 and 10.2.0.1

What is the difference between Oracle database 10.2.01 and 10.2.0.1versions ?
Where can I download jdbc jars for both the versions?
Edited by: user13347335 on Jun 30, 2010 9:06 AM

user13347335 wrote:
What is the difference between Oracle database 10.2.01 and 10.2.0.1versions ?Probably a typo. It is officially 10.2.0.1
Where can I download jdbc jars for both the versions?http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_10201.html
Nicolas.

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Installation of Oracle Database 10g 10.2.0.3 on Windows 2003 Server

Hi Guys,
We have to install Oracle Database 10g 10.2.0.3 on Windows 2003.
I read on net, metalink and OTN as well and it seems there is no single 10.2.0.3 setup available to do so.
One has to upgrade from earlier version to 10.2.0.3.
Is that so? Is this the only way?
I mean if we want new and fresh 10.2.0.3 then don't we have installer for it?
In this case we will have to install 10.1.0.2 and then upgrade? (we have 10.1.0.2 installable with us)
And if at all that is the only path available then for 10.2.0.3 on Windows 32 bit - Patchset 5337014 i.e. p5337014_10203_WINNT.ZIP from metalink is the correct patch?
Thanks in advance!
Av.

Hi guys,
I donwloaded patchset - 5337014, and in its readme it is specified to download and install patch - 5601428.
So I downloaded 5601428 and set ORACLE_HOME and then fired command -
D:\oracle_pathces\5601428>optach apply
and i got error saying -
This Oracle Home does not have components/versions required by the patch.
ERROR: OPatch failed during pre-reqs check.
Following is the command and its output,
D:\Oracle_Patches\5601428>opatch apply
"set PERL5LIB=D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\lib"
"D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\oracle\pro
duct\10.1.0\db_1\OPatch\opatch.pl ..."
OPatch Version 1.0.0.0.48
Perl Version 5.006001
Oracle Home = D:\ORACLE\PRODUCT\10.1.0\DB_1
Location of Oracle Inventory = D:\ORACLE\PRODUCT\10.1.0\DB_1\inventory
Oracle Universal Installer shared library = D:\ORACLE\PRODUCT\10.1.0\DB_1\oui\li
b\win32\oraInstaller.dll
Path to Java = "D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\ORACLE\PRODUCT\10.1.0\DB_
1\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
D:\oracle\product\10.1.0\db_1\OPatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
This Oracle Home does not have components/versions required by the patch.
ERROR: OPatch failed during pre-reqs check.
D:\Oracle_Patches\5601428>
Probably thought that following is the culprit -
Location of Oracle Inventory Pointer = N/A
so fired -
D:\Oracle_Patches\5601428>optach lsinventroy
gave following output -
D:\Oracle_Patches\5601428>opatch lsinventory
"set PERL5LIB=D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\lib"
"D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\oracle\pro
duct\10.1.0\db_1\OPatch\opatch.pl ..."
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = D:\ORACLE\PRODUCT\10.1.0\DB_1
Location of Oracle Inventory = D:\ORACLE\PRODUCT\10.1.0\DB_1\inventory
Oracle Universal Installer shared library = D:\ORACLE\PRODUCT\10.1.0\DB_1\oui\li
b\win32\oraInstaller.dll
Path to Java = "D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\ORACLE\PRODUCT\10.1.0\DB_
1\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
""D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe" -classpath "D:\oracle\prod
uct\10.1.0\db_1\oui\jlib\OraInstaller.jar;D:\oracle\product\10.1.0\db_1\oui\jlib
\srvm.jar;D:\oracle\product\10.1.0\db_1\OPatch\jlib\opatch.jar;D:\oracle\product
\10.1.0\db_1\oui\jlib\xmlparserv2.jar;D:\oracle\product\10.1.0\db_1\oui\jlib\sha
re.jar;." -Dopatch.retry=10 -Dopatch.delay=30 opatch/LsInventory "D:\oracle\pr
oduct\10.1.0\db_1\oui" "d:\oracle\product\10.1.0\db_1" opatch.pl 1.0.0.0.48 FALS
E"
Retrieving inventory.
There is no Interim Patch
D:\oracle\product\10.1.0\db_1\OPatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
OPatch succeeded.
So thought is my opatch the culprit? Its version as seen in above dump is - 1.0.0.0.48, so is that causing any problem? And if yes, then how to get it resolved?
FYI: OS - Win2003, DB - 10.1.0.2.0
Can any one help in this?
Thanks!
Av.

Download of Oracle Database Express Edition 11g Release 2 for Windows

Is there a version of Oracle Database Express Edition 11g Release 2 for Windows x64? Thanks.
Jaffee

XE 11.2 Windows 64
HTH
Srini

Oracle And D2K on Windows NT

My company has developed a Financial Accounting Package having oracle as its backend and D2K as its front end.We have used forms 5.0 and reports 3.0.
We have a problem when we run our package in an NT environment.When we close our package the forms runtime exe F50Run32.exe gives an application error.Even though this problem doesn't interferes with the working of our package this error always comes while closing the application.
One more error is that after our package is installed in an NT machine, when it is restarted a error message with reference to NLNT.dll is thrown.
I would like to know the solution to solve this problem and the reason for this problem.
Thanks
srinath

My 2nd attempt worked...
* I uninstalled all traces of Oracle software on my
system (as mentioned in the earlier posting titled:
"Oracle Installation or Uninstallation Solutions For Windows 95/98/2000/ME/NT/XP" )
* Copied the Oracle CD into a temp area in my hard disk, modified
oraparam.ini in the install direcrory (see above posting),
ran the setup.exe from the hard disk location. Did a Custom
installation. Unselected the DBCA component. (I think i hadnt
done this last time and the installer terminated while trying to
create a database..)
* Modified all the .cl files listed in the posting with -nojit
And the installation went thru successfully!! the Start menu now
shows all the components. Ran setup again and installed the
DBCA also.
Good Luck!
-Usha
I am running into the same thing...I did a Typical installation
(seemed to actually install stuff) but at the end there was
no "end of Installation" window..Then I did a Custom intallation
and selected more products to install. This too seemed to intall.
The Installer just terminates at the end. When i bring it up
again, there are no Installed products listed..
I am installing on a NT workstation P4 machine and have renamed
the symcjit.dll as suggested in one of the earlier posting..
Any ideas whats happening?
_Usha
Hi..!!!
I'm installing on Windows NT workstation with the latest path and fixes, the installation runs well until it shows de 100% complete then, I think begin to start the services but then then Oracle Universal Installer closes...
I expect to start running the net8 assistant configuration and database assistant but that never happend...
When I check there is only 3 services registered and the TNSListener Started..
I also check the shorcuts and there are several missing also I run again the Universal installer to check for "installed products" but there no products installed...but the software is on the hard drive...
I also check for HD space...what else can I do...?
Thanks...!!!!

Runinstaller (oracle database) hangs the zone and global zone

We have recently installed a Solaris 10 (Oracle Solaris 10 8/11 s10s_u10wos_17b SPARC) on the SPARC T4 and create two zones out of it.
We tried to install oracle database on the zone by running the installer (tried xclock and it works very well so display is not a problem).
Not only the zone was hang the entire Global zone SPARC server was hang and the only way to bring the system back is to power on and off it.
-bash-3.2$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 180 MB.   Actual 16058 MB    Passed
Checking swap space: must be greater than 150 MB.   Actual 16384 MB    Passed
Checking monitor: must be configured to display at least 256 colors.    Actual 16777216    Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-06-18_04-26-04PM. Please wait ...-bash-3.2$ Warning: Cannot convert string "-monotype-arial-regular-r-normal--*-140-*-*-p-*-iso8859-1" to type FontStruct
[when system hang]
any ideas?

Hi,
Please can you confirm, is it a standalone DB that you are trying to install..
If yes, What is the DB version?
The error message is simply unable to obtain the xfont. This link might help you:
http://answers.yahoo.com/question/index?qid=1006042535728
Please also refer note:
Error during Installation of Weblogic Server: Warning: Cannot Convert String "-Monotype-Arial-Regular-R-Normal--*-140-*-*-P-*-Iso8859-1" To Type FontStruct [ID 1361691.1]
Regards,

How to setup oracle database to archivelog mode and auto delete ?

Oracle 11g R2
- How to setup database to archive log mode and have oracle only save 24 hours of archive logs
and delete the rest. So at any given time I will have only 24 hours of archive log and not more.
So only 1 day of archive logs.
- Let me know the database parameters I need to setup to accomplish this.
- I don't want to use the RMAN
- I am not setting up the database to archive log mode for recovery purpose. I am setting up archive log mode
so we can use the log miner tool to dig up achives to see log activity for any performance & tuning.
Edited by: johnpau2013 on May 9, 2012 6:09 PM

johnpau2013 wrote:
Thanks everyone for there responses.
I need to rephrase and explain everyone as what I wanted to do exactly. This might help everyone understand and suggest me.
We have oracle database 11g r2. Its a test database. Nothing is critical. We use EXPDP utility to backup the entire database every night. Which is enough for us to recover incase something happens. Even if we loose some data. That's fine.
We are testing our web application on this oracle test database for performance & tuning.
One thing we have noticed is that the redo logs are switching very frequently. 50MB each log file and there are 5 logs. each log switches every 40 seconds. So we wanted to see what is getting written in this redo logs. We wanted to use the LOG MINER tool in OEM to read the logs. It needed our database to be setup in archive log mode. So the log miner can read the archive logs and show us the sql's within the archive logs.
Now when we setup the archive log mode on our database. By default the archive logs destination was set to flash recovery area ( may be oracle default archive log location is flash recovery area folder).
We have setup the db_recovery_file_dest_size to 100GB. Now within 2 days we have filled up the flash recovery area folder. Database was frozen. Then we realized that its because oracle couldn't write archive logs. Because it reached the 100GB. Then we physically deleted files in the flash recovery area folder. Thinking it would help us start the frozen oracle database. But it didn't . The we realized that we are doing something wrong. As Oracle does not know that at OS level we deleted the files. Then temporarily we changed the db_recovery_file_dest_size to 130GB and were able to start the oracle database. Later we turned OFF the archive log mode.
Being a rookie DBA we would have not read something properly.
Finally:
We wanted to know how to always keep only 1 day of archive logs (only for our performance tuning ) and not more than that. All we need this 1 day of archive logs is to use the log miner to read them. Backup is NOT our priority here. Only be able to read the archive logs from LOG MINER is PRIORITY.
Correct me if I am wrong.Okay, so its making much more sense now, thanks for explaining your requirement.
Database won't honor anything that you would do over the o/s without telling it. Your deletion of the archive log from the o/s location is NOT updated in the control file of the database and that's why, even when you had deleted the entire 100GB , from the db perspective, the space was still marked as used. This is the same which would happen even if you would increase the space from 100gb to whatever size as well. To delete the space, you would need to update the database's control file and that you can do from RMAN using its two commands , crosscheck backup following with deleted expired backup . The first command would find that which database backup files are NOT on the o/s which are shown in the control file and would mark all of them as expired. The second command would simply delete those expired files. This would update the control file and you would have your 100gb or whatever space, given back to you.
To keep the archive logs of just one day, set up that Retention Policy for RMAN to either number of copies using the Redundancy option(default and set to 1) or Recovery Window. I believe for you Redundancy would be a suitable choice but you can have a read and play around with it. Setting it up would mark the files as Obsoleted and finally, you can write a small RMAN script to delete those obsoleted files.
Now, what I don't understand is that why you want to keep on generating the archive logs just for the log miner? If you would have generated them once and figure out the reason for extensive redo generation(did you try increasing the redo log file size, 50mb seems to be smallish) , I don't think that there is any reason to keep on generating the archive logs still .
And last part, for your question asked about that whether we can use RMAN to put the db in the archive log and is it a backup tool, yes and yes.
HTH
Aman....

Oracle Database 10g Express Edition and xmlelement

Hi
when i tried to execute the following Sql command on a Oracle Database 10g Express Edition
select level,xmlelement(evalname(desc), value1)
from hr.xml_local
connect by prior id = id - 1 start with level = 1
i got this error:
ORA-19039: The keyword EVALNAME is reserved for future use as a builtin function.
is there a workaround to avoid this?
MDK.

mdrake wrote:
Catch-22.. The other way of doing this easily is XQuery, but since in 10.2.0.1.0 XQuery had a dependancy on Java, and Java is not supported in XE we are back to square 1.
The only other ways are (a) string manipulation - which I refuse to discuss, or (b) DOM-APIOr Oracle Support providing the person with the relevant "alter session set events ..." statement to switch on that feature in 10.2.0.1 (as shown in the SQL and PL/SQL forum thread). Obviously as it's from Oracle support, it can't be supplied on the forums.
;)

Oracle Database at Novel Netware and D2K at Windows Machine

Similar Messages

Maybe you are looking for