Oracle database not getting Up after patch upgrade

Hi,
I have upgraded my oracle database from 10.0.2.1 to 10.0.2.4. after this databse is not coming up. I am able to start/stop listner but while starting SAP it is not able to start databse. Pasting error log below.
Wed Jun 24 14:56:45 PDT 2009
LOGFILE FOR STARTING ORACLE
Trying to start CRD database ...
Wed Jun 24 14:56:45 PDT 2009
checking required environment variables
ORACLE_HOME  is >/oracle/CRD/102_64<
ORACLE_SID   is >CRD<
Wed Jun 24 14:56:45 PDT 2009
check initora
Wed Jun 24 14:56:45 PDT 2009
check initora
Wed Jun 24 14:56:45 PDT 2009
checking V2 connect
TNS Ping Utility for Linux: Version 10.2.0.4.0 - Production on 24-JUN-2009 14:56:45
Copyright (c) 1997,  2007, Oracle.  All rights reserved.
Used parameter files:
/usr/sap/CRD/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = CRM) (PORT = 1527))) (CONNECT_DATA = (SID =
CRD) (GLOBAL_NAME = CRD.WORLD)))
OK (0 msec)
tnsping: V2 connect to CRD
Wed Jun 24 14:56:45 PDT 2009
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Wed Jun 24 14:56:45 PDT 2009
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Wed Jun 24 14:56:45 PDT 2009
starting database
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Jun 24 14:56:45 2009
Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1224736768 bytes
Fixed Size                  2083560 bytes
Variable Size             620758296 bytes
Database Buffers          587202560 bytes
Redo Buffers               14692352 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Wed Jun 24 14:56:53 PDT 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/CRD/SYS/exe/run/startdb: Terminating with error code 12
thanks,
Bhanu

Hi,
I have tried to start and stop oracle from SPLplus but no luck. i am pasting alert log file which is saying some block courruption......
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
  processes                = 80
  sessions                 = 96
  event                    = 10191 trace name context forever, level 1
  sga_max_size             = 1224736768
  shared_pool_size         = 587202560
  shared_pool_reserved_size= 57982058
  filesystemio_options     = setall
  control_files            = /oracle/CRD/origlogA/cntrl/cntlrCRD.dbf, /oracle/CRD/origlogB/cntrl/cntrlCRD.dbf, /oracle/CRD/sapdata1/cntrl/cntrlCRD.dbf
  control_file_record_keep_time= 30
  db_block_size            = 8192
  db_cache_size            = 587202560
  compatible               = 10.2.0
  log_archive_dest         = /oracle/CRD/oraarch/CRDarch
  log_buffer               = 14246912
  log_checkpoint_interval  = 0
  db_files                 = 254
  log_checkpoints_to_alert = TRUE
  dml_locks                = 4000
  undo_management          = AUTO
  undo_tablespace          = PSAPUNDO
  undo_retention           = 43200
  recyclebin               = off
  remote_os_authent        = TRUE
  remote_login_passwordfile= EXCLUSIVE
  job_queue_processes      = 1
  background_dump_dest     = /oracle/CRD/saptrace/background
  user_dump_dest           = /oracle/CRD/saptrace/usertrace
  core_dump_dest           = /oracle/CRD/saptrace/background
  optimizer_features_enable= 10.2.0.1
  sort_area_size           = 2097152
  sort_area_retained_size  = 0
  db_name                  = CRD
  open_cursors             = 800
  optimpeek_user_binds   = FALSE
  pga_aggregate_target     = 773094113
  workarea_size_policy     = AUTO
  statistics_level         = typical
PMON started with pid=2, OS id=25204
PSP0 started with pid=3, OS id=25206
MMAN started with pid=4, OS id=25208
DBW0 started with pid=5, OS id=25210
LGWR started with pid=6, OS id=25212
CKPT started with pid=7, OS id=25214
SMON started with pid=8, OS id=25216
RECO started with pid=9, OS id=25218
CJQ0 started with pid=10, OS id=25220
MMON started with pid=11, OS id=25222
MMNL started with pid=12, OS id=25224
Wed Jun 24 15:06:19 2009
ALTER DATABASE   MOUNT
Wed Jun 24 15:06:24 2009
Setting recovery target incarnation to 1
Wed Jun 24 15:06:24 2009
Successful mount of redo thread 1, with mount id 182910572
Wed Jun 24 15:06:24 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE   MOUNT
Wed Jun 24 15:06:24 2009
ALTER DATABASE OPEN
Wed Jun 24 15:06:24 2009
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Wed Jun 24 15:06:24 2009
Started redo scan
Wed Jun 24 15:06:24 2009
Completed redo scan
1 redo blocks read, 0 data blocks need recovery
Wed Jun 24 15:06:24 2009
Started redo application at
Thread 1: logseq 16126, block 2, scn 1104239482
Wed Jun 24 15:06:24 2009
Recovery of Online Redo Log: Thread 1 Group 2 Seq 16126 Reading mem 0
  Mem# 0: /oracle/CRD/origlogB/log_g12m1.dbf
  Mem# 1: /oracle/CRD/mirrlogB/log_g12m2.dbf
Wed Jun 24 15:06:24 2009
Completed redo application
Wed Jun 24 15:06:24 2009
Completed crash recovery at
Thread 1: logseq 16126, block 3, scn 1104259484
0 data blocks read, 0 data blocks written, 1 redo blocks read
Wed Jun 24 15:06:25 2009
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=25232
Wed Jun 24 15:06:25 2009
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=17, OS id=25234
Wed Jun 24 15:06:25 2009
Thread 1 advanced to log sequence 16127 (thread open)
Thread 1 opened at log sequence 16127
  Current log# 3 seq# 16127 mem# 0: /oracle/CRD/origlogA/log_g13m1.dbf
  Current log# 3 seq# 16127 mem# 1: /oracle/CRD/mirrlogA/log_g13m2.dbf
Successful open of redo thread 1
Wed Jun 24 15:06:25 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Wed Jun 24 15:06:25 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Wed Jun 24 15:06:25 2009
ARC1: Becoming the heartbeat ARCH
Wed Jun 24 15:06:25 2009
SMON: enabling cache recovery
Wed Jun 24 15:06:25 2009
Errors in file /oracle/CRD/saptrace/usertrace/crd_ora_25226.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Wed Jun 24 15:06:25 2009
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Instance terminated by USER, pid = 25226
ORA-1092 signalled during: ALTER DATABASE OPEN...
Thanks,
Bhanu

Similar Messages

  • "disp+work" process in not getting started after kernel upgradation

    Hello Experts,
    Good day…..,
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
    I have posted “dev_W0” log &
    “disp+work” command result obtained in CMD prompt of respective server.
    Please help me out in this. Thanks all in advance.
    “dev_w0” Log”
    trc file: "dev_w0", trc level: 1, release: "741"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      55
    M sid        TNG
    M systemid   562 (PC with Windows NT)
    M relno      7410
    M patchlevel 0
    M patchno    42
    M intno      20020600
    M make multithreaded, Unicode, 64 bit, optimized
    M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
    M pid        2392
    M
    M 
    M Wed Jul 23 02:04:35 2014
    M  kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
    M  length of sys_adm_ext is 500 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
    M  DpCommonParamInit: rdisp/core_file_size = default --> no change
    I  MtxInit: 30000 0 0
    M 
    M Wed Jul 23 02:04:36 2014
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: alloate/attach shared memory (mode=ATTACH)
    M  DpShMCreate: sizeof(wp_adm)                         24288    (1104)
    M  DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
    M  DpShMCreate: sizeof(ca_adm)                           432000  (72)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
    M  DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)                      0              (296)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)                         0              (80)
    M  DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
    M  DpShMCreate: sizeof(sock_adm)                       520080  (1016)
    M  DpShMCreate: sizeof(vmc_adm)                       0              (3208)
    M  DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
    M  DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
    M  DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
    M  DpShMCreate: sizeof(gw_adm)          64
    M  DpShMCreate: sizeof(j2ee_adm)       3936
    M  DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
    M  DpShMCreate: allocated sys_adm at 00000000103D0250
    M  DpShMCreate: allocated wp_adm_list at 00000000103E20F0
    M  DpShMCreate: allocated wp_adm at 00000000103E2410
    M  DpShMCreate: allocated tm_adm_list at 00000000103E84F0
    M  DpShMCreate: allocated tm_adm at 00000000103E8730
    M  DpShMCreate: allocated ca_adm at 00000000134FF000
    M  DpShMCreate: allocated comm_adm at 0000000013568980
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: allocated sock_adm at  0000000013CA4130
    M  DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
    M  DpShMCreate: system runs without VMC
    M  DpShMCreate: allocated gw_adm at 0000000013D23560
    M  DpShMCreate: allocated j2ee_adm at 0000000013D237A0
    M  DpShMCreate: allocated ca_info at 0000000013D24900
    M  DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
    M  DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
    M  DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
    M  DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
    M  DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
    M  DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
    M  DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
    M  DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
    M  DpShMCreate: initialized 21 eyes
    M  DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
    M  DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  <ES> EsILock: use Semphore 33 for locking
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    X 
    X Wed Jul 23 02:04:37 2014
    X  mm.dump: set maximum dump mem to 96 MB
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Wed Jul 23 02:04:44 2014
    M  ThInit: running on host ABTHMSSB01
    I  MtxInit: 0 0 0
    M 
    M Wed Jul 23 02:04:45 2014
    M  calling db_connect ...
    B  Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
    B  Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
    C  Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
    C  Register application info.
    C 
    C Wed Jul 23 02:04:47 2014
    C  Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
    C  Detailed Oracle client (patch) info not available.
    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    M  ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
    M Wed Jul 23 02:04:48 2014
    M 
    M  Info for wp 0
    M 
    M    pid = 2392
    M    severity = 0
    M    status = 0
    M    stat = WP_NEW
    M    waiting_for = NO_WAITING
    M    workerType = DP_WORKER_DIAWP
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M mode_cleaned_counter = 0
    M    control_flag = 0
    M    report = > <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  ThIErrHandle: no current incoming request
    M 
    M 
    M *****************************************************************************
    M  *
    M  *  LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
    M  *  ERROR ThInit: db_connect
    M  *
    M  *  TIME Wed Jul 23 02:04:48 2014
    M  *  RELEASE 741
    M  *  COMPONENT Taskhandler
    M  *  VERSION 1
    M  *  RC 16797709
    M  *  MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
    M  *  LINE 2470
    M  *  COUNTER 1
    M  *
    M  *****************************************************************************
    M 
    M  PfRejectStatistic: clear statistic record
    M  PfClearAllRec: clear statistic area
    M  PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hooks for event BEFORE_DUMP
    M  ThIErrHandle: entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
    “Desp+Work” Command result:
    C:\Users\tngadm>disp+work
    disp+work information
    kernel release 741
    kernel make variant 741_REL
    compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
    compiled for                  64 BIT
    compilation mode UNICODE
    compile time Jul  9 2014 16:39:46
    update level 0
    patch number 42
    source id 0.042
    RKS compatibility level 0
    supported environment
    database (SAP, table SVERS) 700
    710
    701
    702
    703
                                  711
    720
    730
    731
    732
    738
    740
    operating system
    Windows NT 5.1
    Windows NT 5.2
    Windows NT 6.0
    Windows NT 6.1
    Windows NT 6.2
    Windows NT 6.3
    C:\Users\tng

    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    For this issue you need to set up SSFS.
    1639578 - SSFS as password storage for primary database connect
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741
    Are you sure kernel 741 is compatible with an EHP 4 system ?
    Read this SAP note
    1969546 - Release Roadmap Kernel 740
    Regards
    RB

  • Ipod Touch not getting detected after IOS upgrade.

    I have recently upgraded the firmware of my Ipod Touch (1G) to IOS 3.0.1 and was successful in upgrading.
    The issue i am facing is that my ipod touch is not getting detected after reconnecting and the ipod touch is not getting switched on...it is just showing the apple symbol and the progress bar.
    Please let me know if anyone has faced similar type of issue.
    Please also let me know the resolution for this.

    Are you using a USB hub? Try connecting the iphone directly to the computer's USB port and see if that makes a difference.
    Also, with the upgrade, this seems to happen a lot. Most of the time if it is not the USB issue above, it can be resolved by simply redownloading Itunes and installing it on top of your current installation.

  • MSSQL 2008 - Database size getting smaller after EHP upgrade??

    Hi All,
    Did anyone observe the DB size of MSSQL 2008 after EHP upgrade?
    In my two system, after upgraded to EHP5 and EHP2 respectively, the database is getting smaller compare to before upgrade, estimated 5-10gb.
    EHP upgrade is unlike DBEXPORT, it shouldn't have any reorganization features and so do MSSQL.
    Any idea?
    Cheers,
    Nicholas Chang

    > Right after upgrade is smaller and after sgen, db size is bigger than source.
    So it's ok.
    > As system was upgrade from ECC6 to EHP5 with Central Application, HCM and Finance .... the after upgrade size should bigger than the source even before SGEN. Your kind input is mostly welcome.
    If the source system was compiled completely (using SGEN) then you need to compare the sizes of the target system also, otherwise you compare apple with pies.
    Another reason may be that index compression was activated:
    Note 1459005 - Enabling index compression for SQL Server
    You could now upgrade to SQL Server 2008 R2 and apply
    Note 1488135 - Database compression for SQL Server
    this will save additional space (30 - 50 %).
    Markus

  • Listener not getting started after db upgrade from 10.2.0.2.0 to 11.2.0.2.0

    Dear all
    i have successfully upgrade oracle database from 10.2.0.2.0 to 11.2.0.2.0 through dbua but after upgrade i have copied listener and tnsname from realese to and new release then i follow these step
    Stop listener   it get stop perfectly
    start listener  it won't get start  it gives ora-12560 error
    i have checked and change the  file at /usr/sap/sid/sys/profile/oracle also
    if there is anything to do with control file let me know
    Kindly suggest for the above

    Hi Rajendra,
    Please refer:
    1755636 - Database Administrators Segregation
    480266 - Problems with the SYSDBA/SYSOPER/INTERNAL connect
    700548 - FAQ: Oracle authorizations
    Divyanshu

  • Backend PO not getting created after EHP6 upgrade

    Hi Friends,
      Recently there was an SAP patch upgrade in ECC 6.0 and after that while creating the shopping cart the PO is created, but it is not transferring to ECC. We are using the extended classic scenario SAP SRM 7.0. I had checked almost everything right from debugging still clueless. even checked the forums but still the issue is not resolved. Any hints of how to proceed now.
    Regards,
    Ramesh.

    When We are creating shopping cart, system will create Po in back end based on our BAPI.
    Check whether BAPI is running properly or not. You are updated new version EHP6 , I hope you should do required configuration. Try in development server whether Po are creating backend or not.
    I hope you should check all the configuration in backend system i.e in ECC and SRM side.
    Do again batch running and check whether back ground job getting created or not.

  • After patch upgrade in 11g Not able to see current patch

    Hi Experts,
    After upgrading the patch upgrade through MOPatch from 11.2.0.2.0 to 11.2.0.2.4 , I can see the log as succeeded .
    But when I am connecting through sqlplus / as sysdba the version is still showing as 11.2.0.2.0 . Have I missed something I used the readme file README_201111_AIX which is downloaded with this patch.
    I have to also add one more fix_control after patch upgrade that means system is reading the right patch. So, Please suggest how to check this .
    Thanks in Advance.

    Hi,
    My output is :-
    Oracle Database 11g                                                  11.2.0.2.0
    There are 1 products installed in this Oracle Home.
    and also I can see the following that today these much patches installed successfully I am giving some example below :-
    Patch  10149919     : applied on Thu Dec 08 05:22:25 EST 2011
    Unique Patch ID:  14146533
       Created on 3 Oct 2011, 00:42:46 hrs PST8PDT
       Bugs fixed:
         10149919
       This patch overlays patches:
         12827726
       This patch needs patches:
         12827726
       as prerequisites
    Patch  10188865     : applied on Thu Dec 08 05:22:11 EST 2011
    Unique Patch ID:  13551988
       Created on 21 Mar 2011, 03:16:39 hrs PST8PDT
       Bugs fixed:
         10188865
    Patch  10190759     : applied on Thu Dec 08 05:21:56 EST 2011
    Unique Patch ID:  13109839
       Created on 11 Nov 2010, 20:29:55 hrs UTC
       Bugs fixed:
         10190759
    Patch  10243045     : applied on Thu Dec 08 05:21:45 EST 2011
    Unique Patch ID:  13169052
       Created on 23 Nov 2010, 02:40:01 hrs PST8PDT
       Bugs fixed:
         10243045
    Patch  10357961     : applied on Thu Dec 08 05:21:38 EST 2011
    Unique Patch ID:  13814186
       Created on 6 Jun 2011, 06:16:52 hrs PST8PDT
       Bugs fixed:
         10357961
    But if the patches applied is 11.2.0.2.0 will not change to 11.2.0.2.4 or it will only change after applying patchset.
    Thanks in advance.

  • OWB version does not change with Oracle database 11.1.0.7 patch

    Hi,
    This is Kumar and I have just completed applying Oracle database 11.1.0.7 patch (p6890831_111070_Linux-x86-64.zip) on top of Oracle 11.1.0.6 database on RedHat Linux machine. After successful installation, I have issues below statement to check the validity and version of the installed components.
    select comp_name, version, status from dba_registry;
    I could see all the component's version as 11.1.0.7 except OWB component's version which is still *11.1.0.6.0* and status is VALID
    Could you please let me know what went wrong in my installation? or Is this behavior expected one?
    Regards,
    Kumar

    Did you check with Patch inventory ?
    You can run the OWB health check script (download from metalink) to the configuration.

  • OEM is not getting started after changing the Server name

    Hello DBAs
    Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
    But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
    In windows services one service named *"OracleDBConsoleDbname"* is not getting started, which could be the issue.
    Can someone please guide me what can be done to fix this problem.
    Thanks
    -Naveen

    Hi Naveen,
    What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
    What action needs to be taken if the hostname or SID of the database server is changed?
    If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
    Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
    And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
    Eric

  • OEM is not getting started after windows server name changed

    Hello DBAs
    Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
    But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
    In windows services one service named "OracleDBConsoleDbname" is not getting started, which could be the issue.
    Can someone please guide me what can be done to fix this problem.
    Thanks
    -Naveen

    This problem will happen when either changing the computer name or changing the domain name that the server belongs to.
    First, verify that the new computer name contains DNS compatible characters - no spaces or underscore ( _ ) characters, for instance. Next, you will need to recreate the Enterprise Manager Database Control repository. Directions can be found on this page under the heading of "6.2.8.3 Using EMCA After Changing the Database Host Name or IP Address":
    http://download.oracle.com/docs/cd/E11882_01/install.112/e10818/srvpool.htm#CHDEGDIJ
    The above directions should work as shown with Oracle 10g R2 - and possibly 10g R1 also.
    Charles Hooper
    Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • Camera not working properly after ios7 upgrade in iphone 4s

    Iphone 4S
    Camera not working properly after iOS7 upgrade.
    It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
    help me to solve this problem

    Have you tried a battery pull?  If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Can not get microphone after privacy on ipad 2 on ios 7, Can not get microphone after privacy on ipad 2 on ios 7

    Can not get microphone after privacy on ipad 2 on upgrade iOS 702 . What can i doe ? Thans

    The above helped me find this solution:
    do the following steps:
    General > Restrictions > [scroll down to ] PRIVACY: > Microphone > Allow changes
    Not: Settings > Privacy > Microphone
    If you are installing an app like Soundhound, you will have to delete it then just reinstall it. The app then will ask you if it is "OK" to use the microphone. Push "yes". Then go back to the Settings app and follow the chain:
    Settings > Privacy > Microphone > SoundHound   push tab to the right until it turns green and you are set.

  • Null Exception in Family Iview after Patch Upgrade

    Hello
    We have SAP XSS installed on our production portal.
    following was the composition.
    SAP_ESS  603 SP3 
    SAP_MSS  600 SP16 
    SAPPCUI_GP  603 SP3 
    recently we upgraded patch level to
    SAP_ESS  603 SP7 (1000.603.0.7.4.20110124060804) 
    SAP_MSS  600 SP18 (1000.600.0.18.0.20100830054638)  
    SAPPCUI_GP  603 SP7 (1000.603.0.7.0.20100914080506)
    as per the link [https://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES]  and SAP note 1521297
    Backend patches remain the same  viz
    EA-HR Release: 604 ,level : 011
    Now when we try to test the Personal Information Iview it gives us the following error
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
    Note: We have already implemented note no 1018036 which reports the above issue.Jcos are working fine , SSo is properly established and User remains valid.
    Thanks
    Surender Dahiya

    Hi,
    The logs from ST22 as as follows:
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
    procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    Other ESS applications are working fine.Issue is in Family application.Server is also restarted after patch upgradation.
    Please suggest.
    Thanks,
    Surendra

  • Reports not getting posted after webserver bounce.

    Hi Gurus,
    The reports are not getting posted after the webserver bounce occurred. This is the same webserver on which report repository is located.
    However if we boot this webserver first and run a report, then it gets posted. And then after all the other webservers are booted, then the issue does not occur.
    Please advise.
    Thanks

    Sounds a bit like the problem described in this Oracle Solution: ID 660253.1?
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=660253.1

  • Screen fields not getting displayed after Line 16

    Hi All,
    There is a screen exit created in IW51, now the new requirment is to add 3 more fields.  I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

    Hi,
    Can you give me the Enhancement name?
    I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

Maybe you are looking for