Oracle Database Not Starting Up Properly

On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. I kinda figured that I wouldn't run into the exact same issue on Oracle VM. I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still here. I didn't find anything in this forum about the database not starting up, so I'm wondering if others are running into the same problem and how to resolve the issue. Thanks a bunch for your help.

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

Similar Messages

  • Oracle database not starting up in oracle 10g RAC

    Hi!
    Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
    I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
    How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
    Thanks & Regards
    Srikanth MVS

    keithrust wrote:
    On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
    I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
    Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
    I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
    If you want more help, again, give more details about your issue.
    Nicolas.

  • Oracle Database not starting ORA-01034: ORACLE not available and ORA-27101

    Dear Sir,
    today i have restarted the database server (11gR2) after that database service is not starting, the error message is
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Process ID: 0
    Session ID: 0 Serial number: 0

    [oracle@bladb ~]$ export $ORACLE_HOME
    -bash: export: `/oracle/product/11.2.0/dbhome_1': not a valid identifier
    [oracle@bladb ~]$ sqlplus sys/manager as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Fri May 3 17:46:28 2013
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to an idle instance.
    [oracle@bladb ~]$ tail -20 /oracle/product/11.2.0/dbhome_1/startup.log
    SQL> Connected to an idle instance.
    SQL> ORA-00845: MEMORY_TARGET not supported on this system
    SQL> Disconnected
    /oracle/product/11.2.0/dbhome_1/bin/dbstart: Database instance "bladb" warm started.
    /oracle/product/11.2.0/dbhome_1/bin/dbstart: Starting up database "bladb"
    Fri May 3 17:40:24 IST 2013
    SQL*Plus: Release 11.2.0.1.0 Production on Fri May 3 17:40:24 2013
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    SQL> Connected to an idle instance.
    SQL> ORA-00845: MEMORY_TARGET not supported on this system
    SQL> Disconnected
    /oracle/product/11.2.0/dbhome_1/bin/dbstart: Database instance "bladb" warm started.

  • Oracle Essbase not starting up

    Hi,
    We are having issues with oracle essbase server in our oracle Hyperion planning system. The ./opmncl startall process gives below error. checked OPMN log and it says, JVM initialization and singleserver signon are succesfull. However, i see errors in the leasemanager_essbase log. Not sure what this log contains. thanks for help
    ./opmnctl startall
    opmnctl startall: starting opmn and all managed processes...
    ================================================================================
    opmn id=bmaps-ess01:6712
    0 of 1 processes started.
    ias-instance id=EPM_ess01
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    EssbaseCluster-1/EssbaseAgent/AGENT/
    Error
    --> Process (index=0,uid=0,pid=0)
    Service fail over start failure
    Log:
    none
    --> Process (index=1,uid=2078161822,pid=22635)
    failed to start a managed process after the maximum retry limit
    Log:
    /hyperion/Oracle/Middleware/user_projects/ess01/diagnostics/logs/OPMN/opmn/c onsole~EssbaseCluster-1~EssbaseAgent~AGENT~1.log
    [hyperionadmin@BMAPS-ESS01 bin]$ ./opmnctl status
    Processes in Instance: EPM_ess01
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    EssbaseCluster-1 | EssbaseAgent | N/A | Down
    The lease manager log
    [2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-41] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] Odbc Driver [DataDirect 6.0 Oracle Wire Protocol]
    [2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-40] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] Host [bmaps-db01.ocfo.dc.gov] and port [1521]
    [2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-42] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] Service Name [BMAPSSNP.OCFO.DC.GOV]
    [2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-44] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] User [HSS]
    [2012-10-05T11:23:57.126-15:23] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:23:57.128-15:23] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:23:59.133-15:23] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:23:59.134-15:23] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:24:01.140-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:24:01.141-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:24:03.146-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:24:03.147-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:24:05.152-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:24:05.153-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:24:07.158-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
    [2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-1] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Failed to acquire the lease after [6] consecutive attempts.
    [2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-16] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Lease is being surrendered.
    [2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-11] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Preparing to shutdown abort.
    [2012-10-05T11:24:09.161-15:24] [ESSBASE0] [LM-12] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Terminating the process.

    Hi,
    Is your Database started properly?
    Since it seems that EPM components are not able to communicate with the Database.
    You can use the following steps to start Database [if Oracle]-
    1. START TNSLISTNER FIRST      --- cd <bin folder for the Oracle Database> AND THEN ./lsnrctl start
    2. START EMCTL Database        --- cd <bin folder for the Oracle Database> AND THEN ./emctl start dbconsole
    8. START DATABASE              --- cd <bin folder for the Oracle Database> AND THEN ./sqlplus
    9. Log on to                --- https://<IP address for Database server>:1158/em and click on startup and provide the necessary detailsFollow the steps to start the database if database not starting properly
    Thanks,
    HyperEPM

  • HELP! users02.dbf file missing, database not starting

    Hello,
    I created a datafile via Enterprise Manager named users02.dbf for the wrong tablespace (SYSAUX instead of USERS); obviously this datafile was empty. When I realized my error I went and deleted the users02.dbf file from my file system and not from Enterprise Manager (I know.. stupid..)
    The problem that I'm having now is that oracle will not start because it's missing this file, here is the error message:
    SQL> SQL> ALTER DATABASE open
    ERROR at line 1:
    ORA-01113: file 5 needs media recovery
    ORA-01110: data file 5:
    '/var/backup2/oracle/product/10.2.0/Db_1/oradata/standard/users02.dbf'
    I do not hav a backup because it was only a test file.
    Which file do I have to modify in order to tell oracle startup NOT to look for users02.dbf ?
    I really appreciate your help.
    David

    Paul, the last command gave me this error:
    alter database open
    ERROR at line 1:
    ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
    Thanks

  • Connected to auxiliary database (not started)

    Hello! I'm establishing Data Guard on Oracle 11g (x64). OS - CentOS 6.6 x86_x64.
    The problem occurs when i'm trying to connect from my primary db to standby.
    I expect:
    connected to auxiliary database (not mounted)
    but getting
    not started
    And when i'm trying to:
    duplicate target database for standby nofilenamecheck dorecover;
    I get an expected error:
    Starting Duplicate Db at 17-MAR-15
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 03/17/2015 01:04:49
    RMAN-06403: could not obtain a fully authorized session
    RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    I also read simular topic:
    Creating a duplicated database from active database
    but i check several times my listener.ora on standby, and i can't figure out where the problem lies.
    Actions that preceded the appearance of the error:
    The main base is loaded by default (startup)
    StandBy base loaded without mount (startup nomount)
    On the main launch from the terminal «rman target /»
    Command «connect auxiliary sys@orclstandby»
    Password (sys)
    Got: connected to auxiliary database (not started)
    Here is my configuration files:
    Primary:
    tnsname:
    orclprimary =
      (DESCRIPTION =
       (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11centos.com)(PORT = 1521))
       (CONNECT_DATA =
       (SERVER = DEDICATED)
       (SERVICE_NAME = orcl.com)
    orclstandby =
      (DESCRIPTION =
       (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.115)(PORT = 1521))
       (CONNECT_DATA =
       (SERVER = DEDICATED)
       (SERVICE_NAME = orclstandby.com)
       (SID_NAME = orcl)
      pfileORCL.ora
    orcl.__db_cache_size=301989888
    orcl.__java_pool_size=4194304
    orcl.__large_pool_size=4194304
    orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
    orcl.__pga_aggregate_target=314572800
    orcl.__sga_target=469762048
    orcl.__shared_io_pool_size=0
    orcl.__shared_pool_size=150994944
    orcl.__streams_pool_size=0
    *.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
    *.db_block_size=8192
    *.db_domain='com'
    *.db_name='orcl'
    *.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
    *.db_recovery_file_dest_size=4070572032
    *.diagnostic_dest='/u01/app/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
    *.memory_target=784334848
    *.open_cursors=300
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.undo_tablespace='UNDOTBS1'
    db_unique_name='orclprimary'
    log_archive_config='dg_config=(orclprimary,orclstandby)'
    log_archive_dest_1='SERVICE=orclstandby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=orclstandby'
    log_archive_dest_2='LOCATION=/u01/app/oracle/oradata/orcl/archive VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclprimary'
    log_archive_dest_state_1=ENABLE
    log_archive_dest_state_2=ENABLE
    fal_client='orclprimary'
    fal_server='orclstandby'
    standby_file_management='AUTO'
    StandBy
    tnsname
    orclstandby =
      (DESCRIPTION =
       (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11standby2centos.com)(PORT = 1521))
       (CONNECT_DATA =
       (SERVER = DEDICATED)
    (SERVICE_NAME = orclstandby.com)
    orclprimary =
      (DESCRIPTION =
       (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.101)(PORT = 1521))
       (CONNECT_DATA =
       (SERVER = DEDICATED)
    (SERVICE_NAME = orcl.com)
    listener
    SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
       (GLOBAL_DBNAME = orclstandby.com)
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1/)
    (SID_NAME = orcl)
    LISTENER =
    (DESCRIPTION_LIST =
       (DESCRIPTION =
       (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11standby2centos.com)(PORT = 1521))
    ADR_BASE_LISTENER = /u01/app/oracle
    pfileORCL.ora
    orcl.__db_cache_size=301989888
    orcl.__java_pool_size=4194304
    orcl.__large_pool_size=4194304
    orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
    orcl.__pga_aggregate_target=314572800
    orcl.__sga_target=469762048
    orcl.__shared_io_pool_size=0
    orcl.__shared_pool_size=150994944
    orcl.__streams_pool_size=0
    *.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
    *.db_block_size=8192
    *.db_domain='com'
    *.db_name='orcl'
    *.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
    *.db_recovery_file_dest_size=4070572032
    *.diagnostic_dest='/u01/app/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
    *.memory_target=784334848
    *.open_cursors=300
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.undo_tablespace='UNDOTBS1'
    db_unique_name='orclstandby'
    log_archive_config='dg_config=(orclprimary,orclstandby)'
    log_archive_dest_1='SERVICE=orclstandby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=orclprimary'
    log_archive_dest_2='LOCATION=/u01/app/oracle/oradata/orcl/archive VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstandby'
    log_archive_dest_state_1=ENABLE
    log_archive_dest_state_2=ENABLE
    fal_client='orclstandby'
    fal_server='orclprimary'
    standby_file_management='AUTO'
    Where I did wrong?

    Thanks for the quick reply!
    Primary:
    sqlplus sys/<password>@orclstandby as sysdba
    Result:
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:01:29 2015
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Connected to an idle instance.
    SQL>
    sqlplus sys/<password>@orclprimary as sysdba
    Result:
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:28:21 2015
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor
    Standby
    sqlplus sys/<password>@orclstandby as sysdba
    Result:
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:08:37 2015
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Connected to an idle instance.
    SQL>
    sqlplus sys/<password>@orclprimary as sysdba
    Result:
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:10:22 2015
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor

  • RMAN saying database not started??

    Hi there,
    If I log into my database through OEM, it connects fine.
    Through Unix, I set my SID and type in:
    rman target /
    It connects me to rman but says: connected to target database (not started)
    I then try and run a crosscheck archivelog all and it says this:
    Erro message stack....
    failure of crosscheck command
    automatic channel allocation initialization failed
    could not obtain a fully authorized session
    ORACLE not available
    shared memory realm does not exist
    Linux Error: No such file or directory.
    Any thoughta on what is going on here?
    Thanks in advance!

    herb:oradbp2 ~$ id
    uid=500(herb) gid=501(dba) groups=501(dba)
    herb:oradbp2 ~$ env | sort
    _=/bin/env
    DISPLAY=oradbp2.lilydale:33
    G_BROKEN_FILENAMES=1
    HISTSIZE=1000
    HOME=/home/herb
    HOSTNAME=oradbp2.lilydale
    INPUTRC=/etc/inputrc
    KDEDIR=/usr
    LANG=en_US
    LD_ASSUME_KERNEL=2.4.19
    LD_LIBRARY_PATH=:/d01/app/oracle/9ise/lib
    LESSOPEN=|/usr/bin/lesspipe.sh %s
    LOGNAME=herb
    LS_COLORS=no=00:fi=00:di=00;33:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
    MAIL=/var/spool/mail/herb
    ORACLE_BASE=/d01/app/oracle
    ORACLE_HOME=/d01/app/oracle/9ise
    ORACLE_SID=LSDB
    PATH=/d01/app/oracle/9ise/bin:/d01/app/oracle/9ise/OPatch:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/herb/bin
    PWD=/home/herb
    SHELL=/bin/bash
    SHLVL=1
    SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
    SSH_CLIENT=::ffff:10.1.6.200 50766 22
    SSH_CONNECTION=::ffff:10.1.6.200 50766 ::ffff:10.1.0.193 22
    SSH_TTY=/dev/pts/1
    TERM=xterm
    USER=herb
    herb:oradbp2 ~$ ps -ef | grep -i pmon
    herb 1934 1 0 2010 ? 00:02:32 ora_pmon_lsdb
    herb 3984 3359 0 11:06 pts/1 00:00:00 grep -i pmon
    herb:oradbp2 ~$ ls -l $ORACLE_HOME/dbs
    total 18960
    lrwxrwxrwx 1 herb dba 53 Dec 4 2008 initanalyzer.ora -> /d01/app/oracle/admin/analyzer/pfile/initanalyzer.ora
    lrwxrwxrwx 1 herb dba 49 Nov 12 2008 initcit1p1.ora -> /d01/app/oracle/admin/cit1p1/pfile/initcit1p1.ora
    lrwxrwxrwx 1 herb dba 45 Oct 25 2008 initlsdb.ora -> /d01/app/oracle/admin/lsdb/pfile/initlsdb.ora
    lrwxrwxrwx 1 herb dba 45 Nov 22 2008 initpvsp.ora -> /d01/app/oracle/admin/pvsp/pfile/initpvsp.ora
    lrwxrwxrwx 1 herb dba 43 Nov 12 2008 initrep.ora -> /d01/app/oracle/admin/rep/pfile/initrep.ora
    -rw-rw---- 1 herb dba 24 Dec 13 2008 lkANALYZER
    -rw-rw---- 1 herb dba 24 Dec 12 2008 lkCIT1P1
    -rw-rw---- 1 herb dba 24 Dec 9 2008 lkKRON43
    -rw-rw---- 1 herb dba 24 May 18 2010 lkLSDB
    -rw-rw---- 1 herb dba 24 Dec 13 2008 lkPVSP
    -rw-rw---- 1 herb dba 24 Dec 12 2008 lkREP
    -rwSr----- 1 herb dba 2048 Dec 4 2008 orapwanalyzer
    -rwSr----- 1 herb dba 2048 Nov 12 2008 orapwcit1p1
    -rwSr----- 1 herb dba 2048 Nov 25 2008 orapwkron43
    -rwSr----- 1 herb dba 1536 Oct 25 2008 orapwlsdb
    -rwSr----- 1 herb dba 2048 Nov 22 2008 orapwpvsp
    -rwSr----- 1 herb dba 2048 Nov 12 2008 orapwrep
    -rw-rw---- 1 herb dba 4718592 Mar 10 2009 p1k9ipga_1_1
    -rw-rw---- 1 herb dba 1630208 Dec 12 2008 snapcf_analyzer.f
    -rw-rw---- 1 herb dba 1630208 Dec 11 2008 snapcf_cit1p1.f
    -rw-rw---- 1 herb dba 1679360 Dec 9 2008 snapcf_kron43.f
    -rw-rw---- 1 herb dba 6397952 Jan 16 18:27 snapcf_lsdb.f
    -rw-rw---- 1 herb dba 1630208 Dec 12 2008 snapcf_pvsp.f
    -rw-rw---- 1 herb dba 1630208 Dec 11 2008 snapcf_rep.f
    -rw-rw---- 1 herb dba 2560 Oct 25 2008 spfilelsdb.ora.bak

  • Help me please! (The WebLogic Server did not start up properly)

    bc14.jar;C:\bea\WEBLOG~1\server\lib\wloracle.jar;C:\bea\WEBLOG~1\server\lib\wlsq
    lserver.jar;C:\bea\WEBLOG~1\server\lib\wldb2.jar ;C:\bea\WEBLOG~1\server\lib\wl
    sybase.jar;C:\bea\WEBLOG~1\server\lib\jConnect.jar;C:\bea\WEBLOG~1\server\lib\wl
    informix.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\
    ant\ant.jar
    PATH=C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\b
    ea\WEBLOG~1\server\bin;C:\bea\jdk142_05\jre\bin;C:\bea\jdk142_05\bin;C:\bea\jroc
    kit81sp4_142_05\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\mysql\bin;C:\Program File
    s\Java\jdk1.5.0\bin;;C:\bea\WEBLOG~1\server\bin\oci920_8;C:\bea\WEBLOG~1\server\
    bin\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\[hostname]:[port]\console *
    <21.Ara.2004 21:17:08 EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
    ic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120
    -20041118-1131-win-ia32 from BEA Systems, Inc.>
    <21.Ara.2004 21:17:09 EET> <Info> <Configuration Management> <BEA-150016> <This
    server is being started as the administration server.>
    <21.Ara.2004 21:17:09 EET> <Info> <Management> <BEA-141107> <Version: WebLogic S
    erver 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
    WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
    <21.Ara.2004 21:17:10 EET> <Notice> <Management> <BEA-140005> <Loading domain co
    nfiguration from configuration repository at C:\bea\user_projects\domains\jspned
    ir\.\config.xml.>
    The WebLogic Server did not start up properly.
    Exception raised: 'weblogic.management.configuration.ConfigurationException: Exc
    eption thrown in operation getMBeansFromURL - with nested exception:
    [javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
    bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]'
    Reason: weblogic.management.configuration.ConfigurationException: Exception thro
    wn in operation getMBeansFromURL - with nested exception:
    [javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
    bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]
    C:\bea\user_projects\domains\jspnedir>

    bc14.jar;C:\bea\WEBLOG~1\server\lib\wloracle.jar;C:\bea\WEBLOG~1\server\lib\wlsq
    lserver.jar;C:\bea\WEBLOG~1\server\lib\wldb2.jar ;C:\bea\WEBLOG~1\server\lib\wl
    sybase.jar;C:\bea\WEBLOG~1\server\lib\jConnect.jar;C:\bea\WEBLOG~1\server\lib\wl
    informix.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\
    ant\ant.jar
    PATH=C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\b
    ea\WEBLOG~1\server\bin;C:\bea\jdk142_05\jre\bin;C:\bea\jdk142_05\bin;C:\bea\jroc
    kit81sp4_142_05\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\mysql\bin;C:\Program File
    s\Java\jdk1.5.0\bin;;C:\bea\WEBLOG~1\server\bin\oci920_8;C:\bea\WEBLOG~1\server\
    bin\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\[hostname]:[port]\console *
    <21.Ara.2004 21:17:08 EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
    ic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120
    -20041118-1131-win-ia32 from BEA Systems, Inc.>
    <21.Ara.2004 21:17:09 EET> <Info> <Configuration Management> <BEA-150016> <This
    server is being started as the administration server.>
    <21.Ara.2004 21:17:09 EET> <Info> <Management> <BEA-141107> <Version: WebLogic S
    erver 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
    WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
    <21.Ara.2004 21:17:10 EET> <Notice> <Management> <BEA-140005> <Loading domain co
    nfiguration from configuration repository at C:\bea\user_projects\domains\jspned
    ir\.\config.xml.>
    The WebLogic Server did not start up properly.
    Exception raised: 'weblogic.management.configuration.ConfigurationException: Exc
    eption thrown in operation getMBeansFromURL - with nested exception:
    [javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
    bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]'
    Reason: weblogic.management.configuration.ConfigurationException: Exception thro
    wn in operation getMBeansFromURL - with nested exception:
    [javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
    bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]
    C:\bea\user_projects\domains\jspnedir>

  • The WebLogic Server did not start up properly.

    Hi Everybody,
    I am quite new in BEA product, actually with weblogic integration. I get an issue when I tried to start Weblogic integration.
    I used Weblogic integration 8.5 on my Windows box and JDK 1.4.
    When I tried to start it I get the folowing error:
    The WebLogic Server did not start up properly.
    java.io.InvalidClassException: javax.management.MBeanAttributeInfo; local class
    incompatible: stream classdesc serialVersionUID = 7043855487133450673, local cla
    ss serialVersionUID = 8644704819898565848
    at java.io.ObjectStreamClass.initNonProxy(Ljava.io.ObjectStreamClass;Lja
    va.lang.Class;Ljava.lang.ClassNotFoundException;Ljava.io.ObjectStreamClass;)V(Un
    known Source)
    at java.io.ObjectInputStream.readNonProxyDesc(Z)Ljava.io.ObjectStreamCla
    ss;(Unknown Source)
    at java.io.ObjectInputStream.readClassDesc(Z)Ljava.io.ObjectStreamClass;
    (Unknown Source)
    at java.io.ObjectInputStream.readNonProxyDesc(Z)Ljava.io.ObjectStreamCla
    ss;(Unknown Source)
    at java.io.ObjectInputStream.readClassDesc(Z)Ljava.io.ObjectStreamClass;
    (Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unk
    nown Source)
    at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
    urce)
    at java.io.ObjectInputStream.readArray(Z)Ljava.lang.Object;(Unknown Sour
    ce)
    at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
    urce)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unk
    nown Source)
    at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
    urce)
    at java.io.ObjectInputStream.readObject()Ljava.lang.Object;(Unknown Sour
    ce)
    at weblogic.management.internal.TypesHelper.getMBeanInfo(TypesHelper.jav
    a:274)
    at weblogic.management.internal.TypesHelper.getAdminOrConfigMBeanInfo(Ty
    pesHelper.java:384)
    at weblogic.management.internal.ConfigurationMBeanImpl.<init>(Configurat
    ionMBeanImpl.java:137)
    at weblogic.management.AdminServer.<init>(AdminServer.java:59)
    at weblogic.management.AdminServerAdmin.initialize(AdminServerAdmin.java
    :245)
    at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:770)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
    at weblogic.Server.main(Server.java:32)
    Do you have some idea why I get this error while starting the server?
    Thank you in advance!

    First you can start witht he example server, after installation go to start menu --> example--> launch the examples. which will create a sample domain and brings up the server etc., If you want your own domain, using configuration wizard create a domain(follow the steps mentioned in edocs.bea.com) and bring up the server.
    -sadiga

  • Oracle does not start

    Hi,
    I have installed oracle 11g r1 on centos. When the pc is connected to network, then I have no problem to spart oracle, else the oracle does not starts.
    What can I do to start oracle with or without internet connection.
    On windows I used a loopback adapter. Is here any method?
    Thank you

    Hello,
    ORA-12157: TNS:internal network communication errorThis Note of My Oracle Support may give you some solution:
    Local Connections Are Not Working ORA-12157 "TNS:internal network communication error" [ID 399342.1]Is the Loopback Interface well configured ?
    http://www.informit.com/articles/article.aspx?p=25845
    From the below documentation:
    http://download.oracle.com/docs/cd/B28359_01/install.111/b32002/pre_install.htm#BABFHCJG
    "+When you run the ping command on the computer itself, the ping command should return the IP address of the computer.+"
    Hope this help.
    Best regards,
    Jean-Valentin

  • The Web Logic Server did not start up properly

    Trying to start Weblogic Portal Server
    Result is :
    # Note: Server initialization may take several minutes.
    # Please be patient.
    <Jan 26, 2002 11:45:43 PM EST> <Info> <Security> <Getting boot password from user.>
    Enter password to boot WebLogic server:
    Starting WebLogic Server ....
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method weblogic.management.internal.Helper.preloadMBeanInfos()V
    from class weblogic.management.Admin
    at weblogic.management.Admin.initialize(Admin.java:212)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    Press any key to continue . . .
    What is goin on ??????

    "Bernie Ferguson" <[email protected]> wrote in
    news:3c7c6672$[email protected]:
    >
    Trying to start Weblogic Portal Server
    Result is :
    # Note: Server initialization may take several minutes.
    # Please be patient.
    <Jan 26, 2002 11:45:43 PM EST> <Info> <Security> <Getting boot
    password from user.> Enter password to boot WebLogic server:
    Starting WebLogic Server ....
    **** The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method
    weblogic.management.internal.Helper.preloadMBeanInfos()V from class
    weblogic.management.Admin
    at weblogic.management.Admin.initialize(Admin.java:212)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    **** Press any key to continue . . .
    What is goin on ??????
    I had this problem when I tried using Web Logic Server 6.1 SP2. When I
    switched back to SP1 it was fine.

  • The WebLogic Server not starting up properly.

    Hi Guys,
    Can any body help me for following error with weblogic.
    We are using weblogic 8.1 sp 4.
    While starting weblogic server it displays following error.
    ==========================================================
    <13-Oct-2006 09:13:07 o'clock BST> <Error> <Configuration Management> <BEA-150029> <There was an error reading the MBean mydomain:Name=cman_m1,Server=cman_m1,Type=ServerStart. The value {3DES}7wwcZnDbae0xMa4dJR/tOA== for attribute PasswordEncrypted could not be read successfully.>
    The WebLogic Server did not start up properly.
    Exception raised: 'weblogic.management.configuration.ConfigurationException: [Configuration Management:150029]There was an error reading the MBean mydomain:Name=cman_m1,Server=cman_m1,Type=ServerStart. The value {3DES}7wwcZnDbae0xMa4dJR/tOA== for attribute PasswordEncrypted could not be read successfully.'
    Reason: weblogic.management.configuration.ConfigurationException: [Configuration Management:150029]There was an error reading the MBean mydomain:Name=cman_m1,Server=cman_m1,Type=ServerStart. The value {3DES}7wwcZnDbae0xMa4dJR/tOA== for attribute PasswordEncrypted could not be read successfully.
    ==========================================================

    create a new boot.properties file with usernam & password
    and
    Make the backup of cofig.xml file,
    then Edit the config.xml
    PasswordEncrypted={ksskjfhsdjfsdfhdk} server="Admin_WLS">
    replace with
    Password="weblogic" server="Admin_WLS">
    restart the WLS now

  • When you turn on the ipad2 it does not start up properly.  The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

    When you turn on the ipad2 it does not start up properly.  The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes.  Then, the ipad will start up properly.

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Oracle 9i database not starting

    Dear all,
    need ur help. i have installed oracle9i on wndows xp. then i stoped all the services for 9i. n i installed oracle 10g also.
    My problem is that bothy database servies are their and they are automatic.
    10 g Database is starting automatically. but 9i database instance is not opeing automatically.
    i tried STARTTYPE the opetion of oradim also but its not working.
    tell me how to start the 9i database automatically.
    regds
    Ashish

    most likely while installation you might have given a different port no.As a result oracle has ultimately landed up with having more than one listener.And some times I have seen after installation the previous listener does not get started.So I would like to you to check your listener.
    One more point while 2nd installtion you might have changed your oracle home.so while trying to connect to prev instance try using sqlplus from previous oracle_home\bin\.

  • Oracle 10g not starting after upgarde

    Hi,
       Oracle not starting after upgrade and this service not starting automatically . This is error giving in the event viewer
    Description:
    The OracleDEV102iSQL*Plus service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    Cheers
    Murali

    Hi,
    I cannot explain what went wrong.
    The error indicate that the upgrade is not finished or an error happened during the upgrade.
    Please, review the alert log and the upgrade logs.
    There are some possibilities:                                                                               
    - First one is to finish the upgrade to Oracle 10.2 manually. Please,  check the Metalink notes:                                                                               
    Note 316889.1 - Complete checklist for manual upgrades to 10gR2   
        Note:420146.1 - What is the Best Way to Upgrade to 10g?                                                                               
    - Second option is to restore the database to a point before the  upgrade. In this case, you have to use the Oracle 9.2 software as  well and need to restart the upgrade from the beginning.

Maybe you are looking for

  • Scroll bar in 10 g

    How to attach scroll bar to my form in oracle forms 10g.

  • Error in crystel report

    Hi Experts, I am new to crystal report. While I am running the sample report which was given by SAP, I am getting error. Error message is u201Ccouldnu2019t not load file or assembly u2018crystaldecision.windows.forms,version=12.0.2000.0,Culture=neutr

  • My macbook crashed and I see a folder with a question mark blinking-

    I was getting a file from my friend on AIM and my mac froze. So I tried to restart it but all I see is a white screen with a question mark in the folder blinking, instead of an apple sign. Does this mean that my harddrive crashed and I need a new har

  • I am installing 11g on fedora 18

    Hello Everyone ; Can anyone help me to solve my error ? [oracle@localhost database]$ ./runInstaller Starting Oracle Universal Installer... Checking Temp space: must be greater than 80 MB. Actual 1598 MB Passed Checking swap space: must be greater tha

  • Accessory is not optimized for this iphone

    I have iphone 4 and for almost a year I have used a Sylvania docking station to charge my phone at night and to also play my music through the speakers on it then all of the sudden I got the message "This accessory is not optimized for this iphone"