Oracle database server Installation on windows

Hello together,
We have several Oracle installation inhouse. All on different servers. Now we would to merge the Oracle database on one production and on one test server.
What is the best way to do that? We must decide between Windows and Linux Server.
On the windows Server we must use a Enterprise 64bit system to get i.e. 32 memory.?!! Is that right?
Thanks in advance.
regards Steff

user10985075 wrote:
Hi,
thanks for the quick answer.
Do you have some negativ experience with an Windows Server?
-- I mean a 64bit Windows Server with 32GB Ram on it. --
regards
StefanWho doesn't have negative experience with Windows?

Similar Messages

Where can I get Oracle database server 9i for windows 2003

Hi,
I need Oracle Database Server 9i for Windows 2003. From Oracle online download, there is one a patch set available. Where can I get the full version?
Thanks
Laura

Hi, I found the solution. There is no software to direcly install Oracle 9i on Windows 2003. I need to install the software for NT/2000 first, the patch it.
That's why there is only patchset for 2003 for downloading. See the doc below:
three installation components required to install
Oracle9i Database release 2 (9.2.0.3.0) on Windows Server 2003. These three
installation components must be installed in the order listed. If you are
migrating a pre-existing Oracle9i database to Windows Server 2003, first
upgrade the database to the Oracle9i Database release 2 (9.2.0.3.0) patch set
before upgrading the operating system.
Obtain the following installation components:
Oracle9i Database Release 2 (9.2.0.1.0) for Windows
Oracle Universal Installer release 2.2.0.18.0 for Windows
Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows

Oracle Database 10g installation on windows 7 32 bit

Hi,
I tried to install Oracle DB 10g but an error appeared (ORA-12546): permission denied, I searched for this error and found the following:
Cause: User has insufficient privileges to perform the requested operation.
Action: Acquire necessary privileges and try again.
BUT: I cannot understand the solution, Can you help me solve it??????
Thank you very much,,,
Tasneem

Tasneem wrote:
Thank you for your response,,
I actually use the version 10.1 which is not supported by win7, as you said before...
Now I am ok., the DB installation (10.2) is succeeded, but I installed Oracle forms builder 10.1, and when I tried to connect the form with the database, it requested from me to enter database name, I cannot know the exact name, Is there a way to find it?? (the error: ORA-12154)
Please reply as soon as possible,,
Thank you very much,,
TasneemWhat do you mean " I cannot know the exact name". You created it, didn't you?
see http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/

Can anyone provide me a link to download Oracle Database Server 8i?

Can anyone provide me a link to download Oracle Database Server 8i for windows?

Unless you have the media, I don't think you can download Oracle 8i. Oracle no longer supports it nor do they have it available for download.

Oracle Database 11g-R2 with Windows Server 2008

Hi to All Respected Gurus!
Recently I have downloaded Oracle Database 11g-R2.
Will it work with Windows Server 2008-R2?
Please guid eme.
Thanks in Advance.
Muhammad Uzair
Oracle Application Developer
Oracle APEX Developer
Pakistan
+92 (333) 7058754

uzairmalik wrote:
Hi to All Respected Gurus!
Recently I have downloaded Oracle Database 11g-R2.
Will it work with Windows Server 2008-R2?
Please guid eme.
Did you look in the installation guide for the software requirement for 11.2? You could had easily found the answer from there by yourself.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
From the above link,
>
Requirement Value
Operating System
Oracle Database for 32-bit Windows is supported on the following operating systems:
Windows Server 2003 - all editions
Windows Server 2003 R2 - all editions
Windows XP Professional
Windows Vista - Business, Enterprise, and Ultimate editions
Windows Server 2008 - Standard, Enterprise, Datacenter, Web, and Foundation editions. The Server Core option is not supported.
Note: Check My Oracle Support (formerly OracleMetaLink) for more information about Hyper-V support.
Windows 7 - Professional, Enterprise, and Ultimate editions
Windows Multilingual User Interface Pack is supported.
>
Aman....

Oracle Database 11g Installation Issue: ORA-12560:TNS: protocol adapter error.

Folks,
Hello. Initially, my Windows XP host name is "localhost" and IP address 127.0.0.1.
I installed Oracle Database 11g with Windows XP successfully and all Database clients work with Database instance correctly.
For some reasons, I uninstalled the entire Database Server and delete the entire installation directory /oracle.
I configured Windows XP IP address into 192.168.196.101 in order to ping other machines.
For my need, I installed Oracle Database 11g with Windows XP again. On step 7 of 8: Oracle Database Configuration Assistant, I got this error:
ORA-12560:TNS: protocol adapter error.
I click "Password Management" button, there are no rows in this Windows (no username, no lock accounts).
I check listener as below:
C:\>lsnrctl
LSNRCTL>start
Its output: listener name LISTENER has already been started.
LSNRCTL>status
Its output: ......Service DB1 has 1 instance. Instance DB1 status ready. The command completed successfully.
I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is :
listen[0]=LISTENER address=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(port=1522))
I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below
HOST=localhost port=1522
I think HOST=localhost and port=1522 is the cause of the error ORA-12560 because Windows XP has been configured into HOST=192.168.196.101.
But I don't understand how to solve this issue.
Can any folk tell me how to solve this issue ? need to cancel the installation on step 7 of 8 and install it again ?
Thanks.

Folks,
Hello. Oracle Database 11g Installation Wizard is on step 7 of 8. I don't cancel the Wizard. I am not sure whether there is effect or not. listener.ora is not removed. I have been waiting for a while after stop listener. I run the 3 commands again and copy the result as below:
C:\>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:32
:14
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 61: Unknown error
C:\>
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:33
:04
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
System parameter file is C:\SecondTime_OracleDatabase_Install_Directory\product\
11.2.0\dbhome_1\network\admin\listener.ora
Log messages written to c:\secondtime_oracledatabase_install_directory\diag\tnsl
snr\user-19yyar8x0d\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522
ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                14-AUG-2013 19:33:07
Uptime                    0 days 0 hr. 0 min. 3 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\SecondTime_OracleDatabase_Install_Directory\product
\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         c:\secondtime_oracledatabase_install_directory\diag\tn
slsnr\user-19yyar8x0d\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:36
:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "DB1XDB" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: user-19YYAR8X0D, pid: 120>
         (ADDRESS=(PROTOCOL=tcp)(HOST=user-19yyar8x0d)(PORT=1051))
Service "DB1" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:19 refused:0 state:ready
         LOCAL SERVER
The command completed successfully
C:\>
As we see, listener.ora file is not removed by Stop command. I am on the installation Wizard. How to solve this issue ?
Thanks.

Oracle 11g R2 Installation on Windows 7 (64 bit)

While installing, it is asking for Proxy Server. What should I enter?

I'm installing on laptop Oracle 11g R2 Installation on Windows 7 (64 bit) it was asking me to enter Proxy server details, since I'm not connecting internet with proxy I've skipped the step. But after that when reached the "System class" there was two radio buttons 1)Desktop Class - which selected default and clicked on Next button, then it disappeared. Looks like process was stopped. i have looked it in Windows Task manager it is not there.
Is any one know what is going on?
Thanks.

Oracle 11g Server Installation and Configuration

Hi All..
I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
This is for a server and we might even need to replicate the entire DB.
Can any on please help me out in this .
Thank you

Hi,
Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
Regards,
Hussein

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Companion CD installation - getting Oracle Database 10g installation

Hi everyone,
I want to install the Oracle Companion CD (to use HTTP server and HTMLDB) on Solaris with Oracle Database 10g. I downloaded the companion CD and when running the installer I am getting "Welcome to the Oracle Database 10g Installation". I have already installed the database so my question is why the installer is asking me to install another database ? The documentation is explaining that the user would have the choice to select an HTTP server installation.
Best regards,
Othman

Get the companion CD from the same place as the database. Start at http://otn.oracle.com, click on Downloads, and to to the Database download
Get the step by step instructions from the documentation. Start at http://tahiti.oracle.com, go to the database documentation for the version you are using, click on the Books tab, search for "Companion CD Installation Guide for [your operating system]" or "Companion CD Quick Installation Guide for [your operating system]" and follow the steps.
I strongly encourage you to install ONLY the HTTP server from the companion CD, and to install it into a separate ORACLE_HOME.
After that, I suggest you use APEX instead of HTMLDB (APEX is the next generation of HTMLDB and is MUCH better.) To get that going, start at http://www.oracle.com/technology/products/database/application_express/index.html and look at "Documentation and Tutorials" for the installlation guide.

Can I install Oracle Report Server 6i in Windows 2000???

Can I install Oracle Report Server 6i in Windows 2000???
Please reply.
Thanks,
Mukesh

Yes you can, but be sure you will not install it in the same home with 8.7 or later versions of database.

Compatibility: Oracle Database Server 10g on SLES 10 64bit

Greetings,
Installation of Oracle database 10g Release 2 fails:
Downloaded from :
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linx8664soft.html
hro:/new64/database # ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLin
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/Or
## Following is the kernel version:
hro:/new64/database # uname -a
Linux hro 2.6.16.60-0.21-smp #1 SMP Tue May 6 12:41:02 UTC 2008 x86_64 x86_64 x86_64 GNU/Linux
Is there a newer release of Oracle database server 10g which supports SLES 10 SP2? A download link would be of great help.
Thanks,
Ashutosh

Some suggestions.
Edit /etc/SuSE-release to say:
SUSE Linux Enterprise Server 9 (i586)
VERSION = 9
Change it back after Oracle 10.2.0.1 is installed & before applying latest 10.2 patch.
Install the 'orarun' SLES package. (yast as root - Before Oracle Install)
I also install 'gvim' 'Gnu C compiler' & ' Sun Java 1.4.2'. (also, yast as root b4 Ora install)
Then load latest OPatch for 10.2.0.? (Patches are OK with SLES10 in 'release' file)
Then latest CriticalPatchUpdate.
I've had a long battle - and won - , getting 15GB SGA's running on 32bit Linux.
Use 64bit hardware and OS and Oracle if you have a choice. Much simpler.
Regards, Vin.

Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

How to access a PDF file from Oracle DATABASE SERVER

Hi
I have some pdf files in "\home2\docs" directory in Oracle database server 10g. (OS is Linux) I want to access those pdf files from my client system through Oracle Forms. How is it possible?
Please Help!!!! It is very urgent !!!
Expecting fast response!!!!!
Bye

hi
Thank u for ur response.
Initially i tried to access pdf file from database server. I didn't get any solution for that. So I copied all my pdf files to Application server which is in Linux environment at "/home2/docs" directory.
I gave the following command for accessing the pdf files kept in Lnux Application Server from Oracle 10g forms in a button press trigger.
web.show_document('http://192.168.1.53:7779/home2/docs/test.pdf');
It says "page cannot be found"
So I copied one of the pdf file named "test.pdf" to "/oracle/oas10g/IasHome/forms90/java" in Linux Application Server . Then the following command
web.show_document('http://192.168.1.53:7779/forms90/java/test.pdf');
has opened the the pdf file in browser.
192.168.1.53 is my Linux Application Server IP. and 7779 is the port.
Actually we have lacs of pdf files. So i cannot keep all the pdf files in "/oracle/oas10g/IasHome/forms90/java" directory in Linux Application Server. And also all the pdf files not in the same directory , "/home2/docs" some of the pdf files r in the subdirectories of "/home2/docs/" like /home2/docs/sub1, /home2/docs/sub2, /home2/docs/sub3 etc.
Then how to configure my "/oracle/oas10g/IasHome/forms90/server/forms90.conf" file for retrieving pdf files from "/home2/docs/" and its subdirectories. Is Anything other than this, required for solving my problems.
Now My PDF files r in LINUX APPLICATION SERVER not in database server.
Please help!! It is VERY URGENT!!!

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Oracle database server Installation on windows

Similar Messages

Maybe you are looking for