ORACLE DATAGUARD and STANDBY on two LINUX machine (64 bits and 32 bits)

Hi there
I have two Linux machines: one with Linux RH 4 Update 2 for 64 bits and
the other one with Linux RH 4 Update 2 for 32 bits.
I was wondering two things:
1) Is it possible to implement ORACLE DATAGUARD between these two machines?
2) Is it possible to implement only a Static Standby Database on the second node?
Suppose we have Oracle Database EE on both machines.
Thanks in advance for any information
Regards
Felipe

But both oracle database version must be of 32 bit version.
from oracle doc
2.3.1 Hardware and Operating System Requirements
The following list describes hardware and operating system requirements for using Data Guard:
All members of a Data Guard configuration must run an Oracle image that is built for the same platform.
For example, this means a Data Guard configuration with a primary database on a 32-bit Linux on Intel system can have a standby database that is configured on a 32-bit Linux on Intel system. However, a primary database on a 64-bit HP-UX system can also be configured with a standby database on a 32-bit HP-UX system, as long as both servers are running 32-bit images.

Similar Messages

Oracle DataGuard Logical Standby

Hi , I'd like to know what are the premisses to make a standby logical replication.
I have two environments (production and standby) with different number of processors and storage.
I'd like to know if it's possible to create data guard solution with these two environments and what are the premisses that I need aware to install the solution.
Thanks in advance.

Hello;
Yes the storage ( as long as you have enough space ) and cpu don't matter.
You can use hardware that's quite a bit different and it will work fine.
You can also create a Logical Standby fro a physical standby.
These notes may help :
NOTE 413484.1 - Data Guard Support for Heterogeneous Primary and Physical Standbys in Same Data Guard Configuration
Mixed Oracle Version support with Data Guard Redo Transport Services [ID 785347.1]
Logical Standby's don't seem to be very popular and the support base suffers because of this. I would consider a physical standby with Active Data Guard if costs allow.
Active Data Guard makes an excellent "Reader" database plus I believe your switchover and failover options are much better than a Logical Standby.
Oracle DataGuard Logical Standby Setup :
http://orajourn.blogspot.com/2007/02/setting-up-logical-standby-database.html
http://garyzhu.net/notes/DataGuard.html
Best Regards
mseberg
Edited by: mseberg on Apr 25, 2012 10:07 AM

I need to install WAS and EP on two seperate machine

Hi all,
I have installed WAS6.40 on one machine. I want to install EP on a different machine. But when i tried installing EP i got an error message "no j2ee engine found". Cant we install EP and WAS on two seperate machines?
Any help will be appreciated.
Regards
Gopi

Hi Arun,
Sorry it was my friend who posted that, so unfortunately i cant award points.
I tried what you have said, but i got the following error.
<b>SAPInst could not find any SAP J2EE instances that match the Portal Platform requirements. The installation stops. Install the SAP J2EE 6.40 according to the Portal PAM requirements, and run the portal installation again.</b>
So it would be great if you can help me on this.
I will post the same query once again and award points to your replies.
Regards
Rajeev.

I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. There are no page sizes, paper types, appearsto be locked on a 13x19 size but It.

Hi to the Mac Folks,
I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
I primarily print photos from Photoshop CS5. The term Page Set-up has gone missing in the file pull down menu. Can't make any choices There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
Preview has no "Page Setup" - or does it?
Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
Woody

Hey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S.

I need to erase my hard drive and start anew, will time Machine(external drive) and all the discs I got with my computer be enough to restart things

I need to erase my hard drive and start anew, will time Machine(external drive) and all the discs I got with my computer be enough to restart things. And secondly does RAM memory cards go bad. Here's the info on my IMac:
Model Name:          iMac
Model Identifier:          iMac6,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          3 GB
Bus Speed:          667 MHz
Boot ROM Version:          IM61.0093.B07
SMC Version (system):          1.10f2

I need to erase my hard drive and start anew
Why do you feel you need to do this? That is such a 'Windows thing' to do!
And secondly does RAM memory cards go bad
Very rarely, but nothing in life is guaranteed (except death and taxes)! If you purchased RAM from a reputable source like Crucial or OWC it will carry a lifetime warranty.

My button doesn't work, and I have two scratches on the bottom, and my iPod won't turn on also I have no more warranty\

My button doesn't work, and I have two scratches on the bottom, and my iPod won't turn on also I have no more warranty

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem besides the button and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Help! My two XP machines are reimaged and I need to register Photoshop on new laptop.

I was successfully instaled Adobe Photoshop Elements 7 on my new to me Win7 laptop. My two previous computers were XP and due to the
end of support for WinXP, I reformatted them to LInux. I bought the Win7 laptop so I could use Photoshop via Windows as Linux uses GIMP. When I attempt to register my license, it says I have to deactivate the two other machines. This is no longer possible. The rules say you can transfere the serial number if your other computers were lost, damaged or reimaged. But, the registration process does not show how to do this. It keeps telling me I have to deactivate the other two PCs. Help.

Go here:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
scroll down and you'll see a place to start a chat session.

Ho do I know if an ORACLE autmatically starts up with the linux machine?

three of the machines are RAC database and there is one single node database. How do I know if the DB will automatically startup with Linux machine? and if does not automatically start how can I modify the DB's so that they will automatically start with the Linux Machine?
Thanks,
Jayanth

I assume we're talking about 11gR2.
Try the following:
ps -ef | grep ohas
In general if you use ASM you use Oracle Restart.
Here is the [url http://docs.oracle.com/cd/E11882_01/server.112/e25494/restart001.htm#ADMIN12709]documentation.
In fact it's not that complicated and if you use GUI tools (don't hate) such as asmca, netca, dbca all the components are automatically registered with Oracle Restart. If you don't then you can always use srvctl utility (same as in case of RAC) to start, stop, register, remove, check configuration of your services e.g. listener, asm, instances and much more. Actually there're a lot of similarities to Oracle Clusterware, but of cause it's just a single instance with all the simplifications that follow.
It's just very unpractical for me to type a page of text that would pretty much copy readily available documentation.
Hope it helps.
Edited by: Max Seleznev on Nov 29, 2012 9:06 PM

Can I connect an external hard drive to my Airport Express and share it to store files on between two machines via the usb port. The machines are a MacBook and a fairly new Win machine. Printers and Airplay as well as wifi work perfect.

Wondering about the above.

... I bought a hard drive at an Apple store because they told me I could hook it up through my Airport express.
Bzzt. Nope. Bring it back.
Read: http://support.apple.com/kb/HT2421
Question: What is an AirPort Express?
Answer: An AirPort Express is a Wi-Fi base station. Besides acting as an Internet access point, it has several specialized features which make it ideal for specific needs.
Printer - Act as a wireless interface for one printer connected to the USB port, making it available to your network
"Hook it up" - in the sense that a wireless device may be wirelessly "hooked up" to an Express - is a different matter; like "hooking up" with a friend.
Words mean things. Imprecise words mean imprecise things. That generally doesn't end well.
Apple ought to read this stuff once in a while.
John Galt wrote:
I thought you were asking about a USB hard disk attached to the Express. That won't work.
I thought right. That won't work. An Extreme or Time Capsule will.

Why is my wife's hotmail account on her iphone draining her battery with usage and standby being the same? My iphone and hotmail does not do this.

My wife and I both have an Iphone 5 and hotmail accounts.
We are on the same wifi and I have restored and reset her phone several times, but whenever I add her hotmail account to her phone, the phone is always in use according to the usage. also the phone becomes warm as if it was in use for several hours. The standby time is only about 2-3 hours before dying. However, removing her hotmail account, stops this. What about the hotmail account is causing this?

What you're describing is the expected behaviour. I believe though that is also is the easiest way to have all the contents available to both of you at all times. If you have a spacious hard drive you should probably allow this to happen as anything else will be harder to manage.
My suggestion would be the following if you want to try something different.
Store all your music at a location that is accessible by both of you — an example would be to use your Public Folder as the locations where iTunes will go and look for all the media files—. Your wife does have access to it.
In the Finder you will need to move the folder name iTunes Music to the location in your Public Folder (see above). Once that's done, you and your wife will have to go into the iTunes Preferences > Advance Preferences and un-check Copy files to iTunes Media folder when adding to library. From this point on, you can continue to use iTunes as usual. You'll need to tell your wife what has been newly downloaded/imported into your iTunes so she can manually go look for those items in that Public Folder iTunes of yours and import them into her iTunes. She will not duplicate by doing that, but, like I say this is an all-manual work.
She can do the same, so you have access to contents she imported herself. One more downside of this is that both usernames have to be active in your iMac. If yours isn't, she won't be able to access any item (song, book, app) located in your Public Folder's iTunes.
I'm sure there's a way, if you have an router with external hard drive conectivity, for both of you to be able to access —independently— the iTunes Media at all times but I was just reading at another post that doing so can further complicate things.
Hope this helps. Please let me know what you think or decide to do.
Jorge...

My wife and I have two different accounts with apple, and want to share a database.

Let me start by saying that we both just moved from under a rock and started using Apple and Itunes.
I have a 4S she has a 4. We both created an account before using Itunes. I set up itunes on our home pc (XP) without thinking about her wanting/needing to share the pc for syncing and loading music to our phones. I dont want to plug her in until I am sure we wont mess anything up.
Is there a way we can use one pc and two different devices with two different accounts without a divorce. The majority of cds were hers, so i'm already on her bad list
Please help
Len Adams

You're welcome.
Happy Holidays to you and your family.
Please note the items listed under Legend in the right sidebar of this page.

Is there a way to share my Mail account and settings between two partitions, running Snow Leopard and Lion?

I have two partitions on my internal hard drive - one is running Mac OS X 10.6 Snow Leopard and the other is running Mac OS X 10.7 Lion. Mail (5.0) is set up and runs perfectly on the Lion partition and I have not used Mail (4.5) yet on my Snow Leopard partition. I want to know if I can read, download, and save mail into the same user Library folder (probably the Lion user library) from both partitions...

You usually set up your mail accounts on a specific e-mail client programs such as Mail in OS X and Mail on an iPad, which will access the same remote mail server to have your messages show up on each device. Mailboxes can be synced in this way between two devices.
An alternative is to use the same remote application such as Gmail to access that service from multiple devices, so a dedicated e-mail client like Mail is not needed, but the availability of these depends on the e-mail service being used.

How do I share games and music with two kids ipod touch 4g and my iphone 4s

I have Iphone 4s and want to share paid games and music with both of my kids Ipod 4gen touchs. Don't have them set up with individual itunes accounts yet due to fact I don't want to pay for a game three times or a common liked song three times. New to this, please help?

As long as the other iPods are signed into the iTunes account that originally purchased apps, they can just redownload them again and not be charged. If in the USA you can also redownload them by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I 'drag and drop' merged two iPhoto libraries (big mistake) and now everything is out of order. Is there any way to correct it?

OS X version 10.6.8 and iPhoto version 9.1.5 on a Macbook Pro.
Basically I just took one iPhoto library and dragged it on top of another one. I'm not sure why it even let me do this. Now I have 238gb of pictures that are in the wrong order and duplicated in some cases. I already used duplicate anihilator which seemed to get rid of some duplicates.
Any help is much appreciated!!

Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
The only way to merge Libraries is with the paid ($20) version of iPhoto Library Manager
Best way forward: Restore your back ups to the point before you did this and start over using Library Manager

Oracle data guard configuration for primary and standby db_name

I am working on configuring an active data guard for one primary DB and one standby DB. I have a few questions:
1. Can I use different db_name, db_unique_name and instance_name for primary and standby. For example: primary(db_name, db_unique_name and instance_name)=chicago. When I create standby DB with Rman backup and copy of pfile and control file from primary DB or use Grid control to create standby database. Oracle document or Grid control all keep standby db_name=chicago. Only make standby db_unique_name and instance_name=boston. Due to my application system condition, I want to make db_name=boston, not keep it as the same as primary=chicago. Is this valid configuration?
2. In primary datafiles, application system generate datafile name like this: hr_chicago_01.dbf, fn_chicago_01.dbf. When I move datafiles to standby server, if I plan to use db_name=boston for standby DB, can I rename datafiles as
hr_boston_01.dbf, fn_boston_01.dbf? In this way, datafile name match up with db_name. but I will create standby log group and members on primary and standby identically. If in future switching over, DB will not have problems.
3. If I don't use primary DB backup. Instead, I copy all datafiles, redo_log files (no control files) to standby. Then "alter database backup controlfile to trace" from promary and also " create pfile='/xxx/initSTANDBY.ora' from primary. Then modify init.ora and controlfile. Then run control.sql to bring standby DB up. After that, configure redo log shipping and apply with data guard or SQL. Is this a acceptable way to create physical standby DB?
Please advise your comments. Thanks in advance.

I want to make db_name=boston, not keep it as the same as primary=chicago. Is this valid configuration?NO. DB_NAME must be the same ("chicago") at both sites. The Standby will be using a different DB_UNIQUE_NAME (e.g. "boston") and can be using a different Instance name / SID (e.g. "boston").
can I rename datafiles Yes. The database file names can be changed.
If I don't use primary DB backup. Instead, I copy all datafiles, redo_log files (no control files) to standbyWhat is the difference between the first sentence (a backup of the primary) and the second sentence (a copy of the primary) ? A Copy is a backup.
Are you intending to differentiate between an RMAN Backup and a User-Managed (aka "scripted") backup ?
Normally, for DataGuard, tou can use non-RMAN methods to copy the database but there's no value add in this.
You'd still have to setup DataGuard ! (and I wonder if you'd have complications setting up Active DataGuard).
But remember that you MUST create the Standby controlfile from the Primary and copy it over to your Standby -- particularly as you are planning to use DataGuard. This is not created by 'alter database backup controlfile to trace' , but by 'ALTER DATABASE CREATE STANDBY CONTROLFILE AS 'filename''
Hemant K Chitale

ORACLE DATAGUARD and STANDBY on two LINUX machine (64 bits and 32 bits)

Similar Messages

Maybe you are looking for