Oracle DB 10g XE on Windows Server 2008 R2 64bit

Hello to everybody!
I have and old pc with Windows Server 2003 (32 bit) where i've installed Oracle DB 10g XE. Everything works fine.
Now i have to migrate the DB from that old machine to a new one with Windows Server 2008 R2 64bit.
I've tryied to install the Oracle DB 10g XE into the new server but, after installation is finished, i wasn't able to open the DB homepage at http://127.0.0.1:8080/apex. It said "This page can't be displayed". I try with SQLPLUS but after i insert the admin credentials i obtain these lines:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Where can be the problem?

>> ORA-01034: ORACLE not available
Database is not running. Most likely the installer did not complete all its tasks, it can happen.
For windows, the database service has to be set up (see Start/Run/services.msc), services started, installer creates the database, and quite a few other setup chores. If the database creation fails, all the other stuff is not relevant.
Under the <drive:>oraclexe folder there *should* be a datafiles (*.DBF) files somewhere. Can't recall the exact location for 10g. Try file explorer and a search for *.dbf files, that will probably come up empty.
Note the requirements, at Oracle&amp;reg; Database Express Edition it calls for x86, not x64. The 11g XE also has lots of trouble getting a successful install on x64 as well, note the Download page states "does not work on x64" although some folks have gotten it to work.Try the deinstall steps, and use a right click/run as Administrator that *might* get past the UAC glitch that happens on the later OS versions.

Similar Messages

  • When will Oracle 10g/11g support Windows Server 2008 and AIX6.1

    Hi all
    I'm sorry if I post it in a wrong place... But I really want to know when will Oracle 10g/11g support Windows Server 2008 and AIX 6.1?
    I've searched in metalink but found nothing useful. Is there anybody can give me a link of Oracle's roadmap for platform support?
    Thanks!

    Oracle does not announce release dates and neither
    does any other software company.But Oracle does have a very good track record of supporting their products on new windows releases extremely close to the windows release date. Clearly they can't support on an unreleased platform though. Given that the launch of Server 2008 isn't even complete worldwide yet (19th March in the UK for example) it would seem that this enquiry is a little premature.
    Niall Litchfield
    http://www.orawin.info/

  • Installing Application Server 10g R2 on Windows Server 2008

    Hi all,
    I want install Oracle Application Server 10g R2 on Windows Server 2008 ( 64 bit).
    It always prompt error "ORA-12560: TNS Adapter error", when I try to install Oracle Application Server Infrastructure 10g.
    Does anyone know how to solve this problem?
    Thanks in advance.
    Regards,
    MKBH

    Basically use for internal web server only. I'm not sure can I use Oracle weblogic 11g instead of OracleAS 10g R2. I'll use some of the components like Oracle HTTP Server, Oracle Application Server Containers for J2EE(OC4J), Reports Services, Forms Services, Metadata Repository for Oracle Application Server Middle-Tier and etc.

  • How can i install application server 10g R2 on windows server 2008

    Dear friends,
    I need to install application server 10g r2 on windows server 2008.
    Is there any patch for this. where can I get those patches?
    plz help.
    Divya Alok

    MKBH wrote:
    Why OracleAS 10.1.3.x version doesn't have OracleAS Infrastructure components?Because not all OAS releases were complete software versions. By complete software versions, I mean they were not a software version where each component (like Identity Management, Portal, BI, SOA Suite, etc.) would have an updated version.
    OAS Release 2 (10.1.2.x.x) was a complete release but OAS Release 3 (10.1.3) was not. After release 2, Oracle Fusion Middleware OFM 11g is now a complete release.
    OracleAS Identity Mgmt (10.1.4) was the updated version of OAS Id Mgmt after OAS 10.1.2 and before OFM 11g.

  • Applications server 10g R2 certified windows server 2008.

    hi all.
    can anyone help me out.Is application server 10g R2 and windows server 2008 certified or still not certified?
    any suggestion?
    sarah

    Please see this link.
    http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html#BAJGCBEA
    AMN

  • Oracle 11gR2 installation problem on Windows Server 2008 R2 datacenter

    Hi
    I am trying to install Oracle 11Gr2 64 bit on Windows server 2008 R2.The system configuration is "Intel Xeon, RAM 8.00 GB.
    i
    The installation is getting paused at the 8th step of Oracle installation.Neither i am getting any error message nor an entry is recorded in the Oracle inventory log.
    It is showing a blank screen after the prerequiste checks are complete.
    Request you to help me out in resolving the issue.
    Thanks in advance for your cooperation.

    Hi Helios
    Thanks for the response. The database is still not created to check in the Alert log .It is still in the phase of pre-requisite checks. I did not go with Silent installation.It is a plain single instance installation.
    The installation screen is greyed out with out any message or error.
    Please could you share if you have any thoughts on this.

  • OBI11g installation on Windows Server 2008 R2 (64bit)

    Hi,
    Sorry to pick up this topic again, but my research in the forum and other inet sites doesn't help me so far and my installation will not work.
    My Situation:
    I have a Windows Server 2008 R2 (64bit) default installlation. The server (HyperV-managed) has 4 GB RAM.
    I added a Loopback adaptor and set for the loopbackadapter a fixed IP (10.10.10.10 Subnet: 255.255.255.0).
    Entered in the host file (127.0.0.1 localhost and 10.10.10.10 servername)
    Installed JDK 64bit
    Installed Oracle Client 32bit
    Then I tried all three options:
    1) Default OBIEE Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    2) Enterprise Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    3) Manually installed WebLogic 1033 --> SoftwareOnly installation of OBIEE --> manually start config of OBI Installation --> same result as above!
    Perhaps you have some hints for me.
    Cheers
    Wolfgang

    Not in the slightest - I installed five just the other week
    All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
      Install extra roles:
        Application Server
        Web Server (IIS)
          Application Development
          IIS6 METABASE Compatibility
      Install extra Features:
        SMTP Service
    Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
    But the actual install itself was far simpler than CF8 on 2008.
    O.

  • Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT

    Hello there-
    I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
    Is there any limitation on this sense? Any documentation about it?
    Thanks and appreciate your answers.
    Regards,
    Gustavo Ortega
    Software Engineer

    Hello,
    Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
    Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
    Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
    Roles needed in IIS 7.0/IIS 7.5.
    Common HTTP Features
    Static Content
    Default Document
    Directory Browsing
    HTTP Errors
    HTTP Redirection
    Application Development
    ISAPI Extensions
    ISAPI Filters
    Health and Diagnostics
    HTTP Logging
    Logging Tools
    Request Monitor
    Tracing
    Custom Logging
    ODBC Logging
    Security
    Basic Authentication
    Windows Authentication
    Request Filtering
    Note : Anonymous Authentication should be enabled.
    Performance
    Static content Compression
    Dynamic Content Compression
    Management Tools
    IIS Management Console
    IIS Management Scripts and Tools
    Management Service
    IIS 6 Management Compatibility
    IIS 6 Metabase compatibility
    IIS 6 WMI Compatibility
    IIS 6 Scripting Tools
    IIS 6 Management Console
    Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
    larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
    setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
    The following command can be used to set the parameter from the command prompt, please
    change the directory to Windows\System32\inetserv and then execute the command.
    appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
    The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
    after execution of this command.
    Also, are you using Maxdb to store the files or is it a "flat files" content server  ?
    HTH.
    Steve.

  • Problem of SAPConsle 7.10 (Patch 13) on Windows server 2008 R2 (64bit)

    My company is moving from server 2003 to Server 2008 R2 (64bit). We installed SAPConsole 7.10 (Patch level 13) on test server without any problem and configured the profiles in SAPConsole administrator. However when we running the sapcnsl.exe from command prompt, it prompt with error message "*** ERROR => ***AgCom (006FC558): Error: Internal error" and failed to get the SAP login screen.
    I checked SAP Note 1043241 saying SAPConsole 710 as patch level 7 could support Windows server 2008 (32/64bit) both.
    Can anyone help advise on my issue? or is there anyone has testl the SAPConsole 710 on Server 2008 R2 64bit successfully?
    Thank you very much!

    Hello Jackcd,
    I am not an expert in this area but I did a message search for "AgCom error internal error" and I found a message where the customer solved the problem by using a patch. In the customers own words:
    "I installed sapgui 7.10 Patch level 6 on the server where I installed SAPCONSOLE 7.10. Now, the sapconsole working."
    The Sapinator

  • Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

    Hi,
         I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
    FQDN: active.test.com
    Domain Name : test.com
    User : ccasso
    2011-02-05 12:00:30.225 +0700 WARN  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Server was not running ...
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Server starting server ...
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Server is now running ...
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - SPN : [ccasso/[email protected]]
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - building kdc list for domain active.test.com
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - done building kdc list for domain active.test.com
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - KDC(s) :[10.0.240.100]
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - writeKrbFile: writing to file ../conf/krb.txt
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - creating login context ...
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - created login context ...javax.security.auth.login.LoginCon                                                                           
    text@5ad7b2
    2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer                                                                                           
    - Unable to start server ... KDC has no support for encryption type (14)
    2011-02-05 12:00:50.244 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Notifying GSSServer status Stopped
    2011-02-05 12:00:50.244 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - server is exiting .

    Hi,
    This error means that your DC does not support the encryption method the ACS wants to use.
    Usually this happens when you run 2008 Server with 2003 functionality...
    You will need to run ktpass.exe according to the DC you are running:
    http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
    For Windows 2008 Server at 2003 Server functional level:
    ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
    PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
    HTH,
    Tiago
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • Now there is no available of windows server 2008 R2 64bit download. so i want to know the equivelent product in server 2012?

    now there is no available of windows server 2008 R2 64bit download. so i want to know the equivelent product in server 2012?

    Hi,
    Windows 2008 R2 and Windows 2012 are not equivelent product, there are many new features in Windows 2012, and Windows Server 2008 R2 Evaluation (180 days)  still availabe:
    http://www.microsoft.com/en-us/download/details.aspx?id=11093
    Regards,
    Yan Li
    Yan Li
    TechNet Community Support

  • Oracle Dev-suite 10g installation on WINDOWS server 2008 R2

    Hi Friends,
    Is it possible to install Oracle Dev-suite 10g on WINDOWS server 2008 R2.Any idea on this,can you please share.
    Best regards,
    Rafi.

    Hi John,
    Is it possible to do this by applying any patches or alternate option.
    Best regards,
    Rafi.

  • Oracle 10g install on Windows server 2008 R2 ( 6.1 )

    Hi All,
    I am trying to install Oracle 10g over windows server 2008 R2 (6.1) but it gives error that OS is not supported. I tried to install below version.
    Oracle Database 10g Release 2 (10.2.0.4.0)
    Enterprise/Standard Edition for Microsoft Windows Vista x64, Windows Server 2008 x64,
    Microsoft Windows Server 2008 R2 x64, Windows 7 x64
    But it fails with error that OS version 6.1 is not supported. On download page it is written to get 10.2.0.5 patch from My Oracle support for windows server 2008 R2, I got patch p8202632_10205_MSWIN-x86-64 but it requires a pre-installed oracle home.
    So how should I install Oracle 10g as 10.2.0.4 does not get installed and the patch asks for a previous install?
    The reason I am installing Oracle 10g is that our Java application is running in production over JDK 1.4 and Oracle 11g does not provide JDBC driver for JDK 1.4, is there any JDBC driver for Oracle 11g that can work with JDK 1.4?
    Thanks in advance for help.
    Best Regards!
    Irfan

    Please find below last lines of logs:
    *** Product-Specific Prerequisite Checks Page***
    INFO: Entry point:oracle.server_EE
    INFO: Starting Prerequisite checks : Sun Mar 11 09:16:16 PDT 2012
    INFO: Checking CertifiedVersions
         This is a prerequisite condition to test whether the Oracle software is certified on the current O/S.
    INFO: Expected result: One of 5.0,5.1,5.2,6.0
    Actual Result: 6.1
    Check complete. The overall result of this check is: Failed <<<<
    INFO: --------------------------------------------------------------------------------
    INFO: Checking ServicePackChecks
         This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
    INFO: Check complete. The overall result of this check is: Not executed <<<<
    INFO: --------------------------------------------------------------------------------
    INFO: Checking TotalMemory
         This is a prerequisite condition to test whether the system has sufficient physical memory.
    INFO: Expected result: 256MB
    Actual Result: 4094MB
    Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Checking DetectIfDHCPAssignedIP
         This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
    INFO: Detecting the IP.....:10.1.87.20
    INFO: Checking the network interface display name.... :Intel(R) PRO/1000 MT Dual Port Network Connection
    INFO: Checking the network reference name..... :eth4
    INFO: Checking the platform .......233
    INFO: Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Checking CheckPathEnvVariableLength
         This is a prerequisite condition to test whether the PATH environment variable is within the allowable character limits. On Windows XP and Windows 2003, the maximum character allowed is 8191. On Windows 2000, NT and 98, the limit is 1023 characters.
    INFO: Checking Oracle home from the env... :C:\oracle\product\10.2.0\db_1
    INFO: Checking Path from the env... :C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
    INFO: Max path length for OS:Windows Vista is... :8191
    INFO: *****************************
    INFO: Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Checking OracleBase
         This is a prerequisite condition to test whether the environment variable 'ORACLE_BASE' is set as a subdirectory of the Oracle home
    INFO: Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Checking OracleHomeSpace
         This is a prerequisite condition to check whether the specified Oracle Home contains any spaces in the path.
    INFO: Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Checking InstallOnRoot
         This is a prerequisite condition to test whether installation is done at the root of a drive.
    INFO: Checking the ORACLE HOME.... :C:\oracle\product\10.2.0\db_1
    INFO: Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Checking DetectAnyInvalidASMHome
         This is a prerequisite condition to test whether the system has been cleaned properly.
    INFO: Checking the platform .......233
    INFO: Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Checking CompatibilityChecks
         This is a prerequisite condition to check whether the Oracle Home specified by the user already contains an installed product which is incompatible with the product being installed.
    INFO: Actual Result: NEW_HOME
    Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Prerequisite checks completed : Sun Mar 11 09:16:17 PDT 2012
    SEVERE: Some required prerequisite checks have failed. Please make sure the system meets all the requirements before install can proceed.
    INFO: User Selected: Yes/OK
    WARNING: Do you really want to exit?
    INFO: User Selected: Yes/OK
    INFO: recdelete: C:\oracle

  • Oracle ODBC version error on windows server 2008 64 bit

    We had installed oracle 10g standard edition on windows server 2008 64 bit. After one hour use of ODBC connection, we are getting a error message like 'Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed'
    Find the link for error message. http://www.google.co.in/imgres?newwindow=1&biw=1600&bih=1075&tbm=isch&tbnid=zc1Vas4O9Eqj4M:&imgrefurl=http://social.tech…
    Please give solution for the said issue. Thanks in advance.

    SAP said it is Oracle not support windows server 2008.

  • Oracle DB 10g r2 & Microsoft SQL Server 2008

    Hello,
    I have a need to load data from Oracle 10g r2 to SQL Server 2008 and vice versa. I am new to heterogeneous connectivity. How do I connect to SQL Server from Oracle and vice versa(connect Oracle from SQL Server).
    The Oracle version : Oracle Database 10g Enterprise Edition Release 10.2.0.5.0
    The SQL Server Version :  Microsoft SQL Server 2008Both databases are located on different machines. Oracle is hosted on Solaris UX and SQL Server 2008 is on Windows Server 2008.
    Any documentation in this regard will help.
    Please advise.
    Thank you much for your time in reading this post.
    Rich
    Edited by: Rich V on Nov 13, 2011 9:02 PM

    When you want to connect from Oracle to a SQL server you need to use a gateway. Oracle offers 2 different kind of gateways. The gateway which is for free is based on a 3rd party ODBC. It is called Database Gateway for ODBC (DG4ODBC) and allows you to connect to any foreign database as long as the ODBC driver is compliant with the gateway requirements documented in the manual.
    As it allows you to connect to any foreign database it only supports a few Oracle functions which is able to map to foreign database equivalents. All other functions are post processed.
    The more powerful product is Database Gateway for MS SQL Server (DG4MSQL) which is designed for MS SQL Server connections. Thus it supports many more functions which it is directly mapping to SQL Server equivalents and it is also able to participate in distributed transactions and to call SQL Server stored procedures. This DG4MSQL gateway is not for free and requires a license.
    I would suggest to check out My Oracle Support and look for this note:Master Note for Oracle Gateway Products          [Document 1083703.1]     
    It contains a reference to many other notes describing the differences between DG4ODBC and DG4MSQL and it also contains links to common set up notes.
    After looking at this note you'll notice that on Unix most 3rd party ODBC drivers are commercial drivers and you might need to purchase them as well. Sometimes the license costs for these drivers are more expensive then purchasing the DG4MSQL. Another option would be to install DG4ODBC on a Windows platform, for example on the SQL Server machine and you could then use the MS SQl Server ODBC driver which is for free and you then have a complete solution for free.

Maybe you are looking for