Oracle db 10gR2 installation on AIX 5 series server

can anyone please suggest me a gud link to get detailed steps for installing oracle database 10g R2 on AIX server as I am completely new to AIX.
I have done db admin and maintainence on Solaris and Linux, though.
Please also suggest gud installation guide for Oracle Application server 10g R2 forms and services only.
thanks in advance!

http://download.oracle.com/docs/cd/B19306_01/install.102/b28055/toc.htm
www.oracle-base.com for oralce Apps installations...

Similar Messages

Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!

Hi,
I have installed AIX 5L on 32 bit kernel machine.
Thereafter I have installed Oracle 9.2.0.1 Database!!
But whenever I am running sqlplus or listener it gives me an error that "you cannot run 64 bit application on 32 bit machine"
but I am able to run DBCA or NETCA command from oracle home directory & it runs properly. It also create & configure the listener but due to the above mismatch it could not start!!
Can any one help !!
Regards,
Indraneel

Same thread into Installation Forum : Re: Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!
Nicolas.

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

How to force Oracle AS 10gR2 installer to use IP and hostname on 2nd NIC

My target machine for Oracle AS 10gR2 10.1.2.0.2 has two NICs, for example:
NIC1: 10.0.0.1 hostname1
NIC2: 10.0.0.2 hostname2
The hostname of this machine is hostname1
Oracle AS installer will use hostname1, IP address 10.0.0.1 for installation by default. Does anyone know how can I force Oracle installer to use hostname2 and 10.0.0.2 for installation? Thank you.

Were you able to force the installer to use a specific NIC interface when installing? I would like to have two mid tiers on the same box, each with a different host and IP.

Oracle 9.2 installation on AIX-unix version 5.2

Hi,
I need to install oracle 9.2 on AIX server whose OS is version 5.2 and hardware is IBM P-Series P615 . Will there be any problem in doing this activity or successfully it can be installed ?

Hi;
Why oracle 9i? If possible use supported version like 11gR2. If you have to install oracle 9iR2, yes you can make installation on 5.1, 5.2, 5.3 (5L)(64bit only)
For details please see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Oracle 10g rac installation on IBM power server

Dear Gurus,
I am installing Oracle 10g RAC on IBM power server but while running CRS getting the following errors. Please help to resolve this issue.
OUTPUT from Installation log:
INFO: Start output from spawned process:
INFO: INFO:
INFO: /oracle/app/oracle/product/crs/bin/genclntsh
INFO: /usr/bin/ld: cannot find -lxl
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make:
INFO: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/app/oracle/product/crs/network/lib/ins_net_client.mk'. See '/oracle/app/oracle/oraInventory/logs/installActions2011-12-26_04-40-48PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
SYSTEM:
IBM power server
Linux 5.3
I have already tried changing ORACLE_HOME,CRS_HOME,LD_LIBRARY_PATH but nothing worked.
Regards,
Prajash

Those errors remind me on errors I encountered when I was trying to do installation that was not certified,
so try to check if installation you are doing is actually supported.
In the meantime , visit metalink and read document [ID 460969.1] , */usr/bin/ld: Cannot Find -lxml10, Genclntsh: Failed To Link Libclntsh.so.10.1*

Oracle 8.i Installation - FOR AIX 5 -

Is Oracle 8i supported on AIX 5 (I know it is supported on AIX 4.3.3), but the install scripts do not seem to be coded for AIX5.
Thanks
Kevin Shaw
dba e-result plc

Oracle's policy seems to be 'remove the download when the product becomes obsolete and unsupported'.
Oracle8i has been unsupported for some time now. If you are lucky, a conversation with your Sales Rep and with Oracle Support might provide the software.
<off>
But I must admit confusion - why upgrade pieces and expect the non-upgraded pieces to continue working without difficulty? Your mix-and-match approach is a recipie for long-term problem resolution opportunities
</off>

Do I need to install oracle database 10gr2 before installing Oracle applica

I am new to Oracle application server. I am going to install Oracle application server 10g. From what I read, it looks like I need to install oracle database 10gR2 first on the SAME server? Is that correct?
If I do so, oracle_home will be point to where? to the Oracle application server home directory, or oracle db directory?
Thank you very much for you help.

hi,
Even i am new to oracle application server and had the same doubt that you have.
When you install Application Server there would be two tiers installed, application tier and middle tier, these tiers can be running from the same machine or different machines.
These tiers will have a meta data repository to store application server related data, this database will be installed along with application server.
It is upto you to install "oracle database 10gR2 " before or after installaion of application server, this will be an independent database which will have its own home, but after this installation you will have three homes, ex: infra_home,mid_home and 10gR2_home.
by default oracle_home is set to the last installation that happens so if you install the database 10gR2 after installing application server it will point to 10gR2_home, but if you install 10gR2 before and application server later then the oracle home will be infra_home(if both the middle tier and infratier are on the same machine)
you can always change the oracle home by using set ORACLE_HOME=path/to/oracle/home( in windows)
or export ORACLE_HOME=path/to/oracle/home (in unix)
hope this helps....
regards

Xlc file Required for Oracle Product Installation on AIX 6.1

Hi All,
I am trying to install Oracle 11g Forms & Reports on AIX 6.1 [TL12].
I have installed JDK and Weblogic Server without any Errors.
When we reach 93% on software Alone installation with 11g Forms & Reports, we got some error
ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '///INS_PRECOMP.mk'We raised a SR for this Error, Oracle Support given one solution to follow.
>
Yes, there is a known issue with AIX OS.
Before starting the Oracle Fusion Middleware 11g Classic installation on IBM AIX, check for "xlc" availability on the system. It should be present either under /usr/bin/ or under >/usr/vac/bin directory.
If /usr/vac/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/vac/bin/xlc /usr/local/bin/xlc
If /usr/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/bin/xlc /usr/local/bin/xlc
Please clean up the failed install and start new install once you follow the above steps and let me know the results.But Unfortunately in our AIX 6.1 Box we dont have any 'XLC', in any of the folder in entire file system.
What is this XLC ?? if that is not available how to create the SYMLINK ?
Kindly Some one Advice me.
Regards,
Paja

Hi Paja,
I would recommend you o post this thread under application server/weblogic forum.
Arik

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

Oracle Enterprise 10g Installer Can Not Run in Suse Enterprise Server 11...

I downloaded Oracle Enterprise 10g in Suse Linux Enterprise Server 11. I followed all the pre-installation tasks.
Under database directory (/mnt/app/oracle/installfiles/database/), i did:
./runInstallerI got this message:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2010-02-23_06-55-40AM/installActions2010-02-23_06-55-40AM.log
This the log file's contents:
Using paramFile: /mnt/app/oracle/installfiles/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLin
ux-1.0, asianux-1 or asianux-2
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/Or
aInstall2010-02-23_07-01-15AM/installActions2010-02-23_07-01-15AM.log
I'm running Suse Linux on VM...
What should i do? I hope there is solution for it other than installing another linux flavor.

On SUSE Linux Enterprise Server 10 and SUSE Linux Enterprise Server 11, the installation will pass the operating system prerequisite checks if you change each 10 or 11 to 9 in the /etc/SuSE-release file. Ensure that you replace the original values in the /etc/SuSE-release file after the Oracle installation is complete.
Original value: SUSE Linux Enterprise Server 11 (x86)
Changed value: SUSE Linux Enterprise Server 9 (x86)

Oracle 8 installation in Windows 2000 Server

I can't install oracle Enterprise Manager (Oracle 8 product) in a Windows 2000 Server system. The installation program show me this error message:
"Unable to delete the NT Service for the
SQL * NT V2 listener"
Can any body have the solution?

Supposedly you need to find these 3 files.
SQLNET,TNSNAMES, LISTENER using your windows find from start. change the names of the dev ones to .bak or something else.
copy the files from your 8i/network/admin into those 2 other places (forget the/samples directories). restart the database and it should connect (Developer stuff to database) A friend of mine did this on W2K and it wokred fine. I have tried it on win98 with 8i personal edition for win 98 and DEV 6 and it failed. So if anyone knows anything I am missing let me know. SQL+ works fine so I knw the DB is fine.
Thanks,
Michael

Oracle 10gR2 installation Media

Hi,
I can see on OTN where I can download Oracle 10gR2 for all platforms, and I can see on oraclepartnernetwork where I can request installation media be shipped for 10gR1.
Where do I request official installation media from Oracle for 10gR2???
Cheers for any feedback

You want the CDs? You can get a media pack from http://store.oracle.com/
If you just wante the images you probably need to go to edelivery.
~Jer

Bypass installer system check for Oracle Designer 10gR2

Is there a way to bypass the batch file or edit it that runs prior to the universal installer loading?

I am trying to install Oracle Designer 10gR2 and the setup starts a batch file (see link below for image) that does a system requirement check. This fails on a machine that I need to install Designer. The reason it fails is because the paging file is in a different place than where this batch file is looking. The system meets the requirement it just happens to have the paging file in the wrong place.
My question; is there a way to turn this off with a command line switch or something so the installation will proceed unimpeded?
Here's the link to the image file, please keep in mind that this is an example and not the actual failure message. Please believe me it is the swap file it is failing on.
Link: http://home.cccexpress.com/greg/images/oraclebatch.JPG

Oracle 10gR2 installation fails in Solaris 10

Hi All,
I am facing the following problem in Solaris 10 SPARC 64 bit machine.
1.     Downloaded Oracle 10g R2 installable from oracle
2.     Created user oracle and group dba and modified project settings and permissions as per quick installation guide
3.     Installation of software is successful. But dbca fails with following error message.
ORA-19624: operation failed, retry possible
ORA-19870: error reading backup piece /vol1/ora10gr2/product/10.2.0/Db_1/assistants/dbca/templates/Seed_Database.dfb
ORA-19587: error occurred at reading 0 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27067: size of I/O buffer is invalid
4.     I also tried creating scripts using dbca and running it manually. It fails with following error message in trace file
Corrupt block 1 found during reading backup piece, file=/ora10gr2/ora10gr2/product/10.2.0/Db_1/assistants/dbca/templates/Seed_
Database.dfb, corr_type=3
5.     Creation of custom database also fails with similar error message
It is Solaris 10 (Solaris 10 11/06 s10s_u3wos_10 SPARC) machine with patch level 125100-05 .
I know this question has to be posted in Oracle forums. But I could not see others facing this issue in oracle forums. If anybody has faced this issue please let me know.
Thanks!

Yes, I was trying to install Oracle for Solaris sparc 64 bit.
again I reformatted the system with Solaris 10 8/07 release but I am getting the same error. Machine model is v480. even i tried to create a database manually, CREATE DATABASE command fails with the same error
Please find trace file content below
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
control_files            = /u01/ora10gr2/c1.ctl, /u01/ora10gr2/c2.ctl, /u01/ora10gr2/c3.ctl
db_block_size            = 8192
undo_management          = AUTO
db_name                  = ORA10
PMON started with pid=2, OS id=1331
PSP0 started with pid=4, OS id=1333
MMAN started with pid=6, OS id=1335
DBW0 started with pid=8, OS id=1337
DBW1 started with pid=3, OS id=1339
LGWR started with pid=5, OS id=1341
CKPT started with pid=10, OS id=1343
SMON started with pid=12, OS id=1345
RECO started with pid=14, OS id=1347
MMON started with pid=16, OS id=1349
MMNL started with pid=18, OS id=1351
Tue Oct 9 16:45:17 2007
create database ORA10
logfile   group 1 ('/u01/ora10gr2/redo1.log') size 10M,
group 2 ('/u01/ora10gr2/redo2.log') size 10M,
group 3 ('/u01/ora10gr2/redo3.log') size 10M
character set          WE8ISO8859P1
national character set utf8
datafile '/u01/ora10gr2/system.dbf'
size 50M
autoextend on
next 10M maxsize unlimited
extent management local
sysaux datafile '/u01/ora10gr2/sysaux.dbf'
size 10M
autoextend on
next 10M
maxsize unlimited
undo tablespace undo
datafile '/u01/ora10gr2/undo.dbf'
size 10M
default temporary tablespace temp
tempfile '/u01/ora10gr2/temp.dbf'
size 10M
Tue Oct 9 16:45:18 2007
Hex dump of (file 0, block 9) in trace file /u01/ora10gr2/product/10.2.0/Db_2/rdbms/log/ora10_ora_1352.trc
Corrupt block relative dba: 0x00000009 (file 0, block 9)
Bad check value found during control file block write
Please suggest some other troubleshooting steps

Oracle db 10gR2 installation on AIX 5 series server

Similar Messages

Maybe you are looking for