Oracle DB 11g R2, Services starts automatically against "Manual" mode

Hi guys
For out lab testing, we installed 11g R2(64Bit) on Windows 8 Professional (64Bit) and setup all the Oracle services startup mode as "Manual". However, the following services are restarting itself during a booting(ie, without exclusively starting them!!!!)
dbconsole
listner
Oracle Service
Any explanations?
Regards,
raj
Edited by: rthampi on Dec 9, 2012 10:43 PM

Niket Kumar wrote:
11GR2 is not certified for Windows 8 Professional (64Bit)
if services are in manual mode then it will not start automatically.check is there any script running which will start the services at the time of windows startup.
http://docs.oracle.com/cd/E11882_01/install.112/e24281/toc.htm#BGBEEBAD
Edited by: Niket Kumar on Dec 10, 2012 12:41 PMHello Niket
I do know that it is not certified, which was the case of 10g while Windows 7 was just launched. We worked on it and MADE it run on Windows 7 machines without having the same issue mentioned in the thread. As far right now, there are no startup scripts facilitating the automatic startup of Oracle services. Oh yeh, I will go ahead and do a re-install to confirm that nothing is wrong place :)
regards,
raj

Similar Messages

Start camera in manual mode?

whether you can make the camera to start immediately in manual mode?
Topic edited by Rickard
Solved!
Go to Solution.

It's not possible when using the camera button but if you tap "Camera" in the app drawer or home screen it will go to Manual if that's what you used last time.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How could I restert Oracle AP / 11g DB service safely ?

I was asked to restart Oracle Insight AP and oracle 11g DB services of win2008R server by daily job.
I guess at first stop Oracle Insight AP related service by net stop command maybe.
And how could I stop and start Oracle 11g DB services of win2008R2 safely ?
It is not RAC environment.
1
Is it OK to just simply stop Oracle DB related services by net stop command and start by net start command ?

840105 wrote:
Is it OK by the below ?
Service start.
①net start OracleService[SID])
②net start OracleOraDb11g_home1TNSListener[listenername])
③OEM(OracleEnterpriseManager)　(net start OracleDBConsole[SID])
Service stop.
①OEM(OracleEnterpriseManager)　(net start OracleDBConsole[SID])
②net start OracleOraDb11g_home1TNSListener[listenername])
③net start OracleService[SID])
What does your own testing show?
Be sure to anlayze the db alert log after your test. What you don't want to see is a crash recovery on the startup. That would indicate that a net stop of the db service is effectively a 'shutdown abort', leaving your db in an in-consistent state. You could probably get away with that 1000 times. But the one time you don't get away with it, things will be very painful.
Why were you asked to do this as a daily job?
Oh, yes, it's on Windows. ... where everyone believes that regular weekly reboot is "A Good Thing (tm)"

After restart Oracle Report Server some reports start automatically to run.

When our report server is restarted always a number of reports are started automatically.
I don't know why these are started automatically?
Is there a avoid starting these reports?

Hello,
If you are storing the jobs on the database then please check:
Using the Reports Server Queue PL/SQL Table and API - RW_SERVER_JOB_QUEUE (Doc ID 72531.1)
otherwise just rename the report server .dat files
1- Go to $ORACLE_HOME/reports/server directory
2- Rename Reports Server dat file.
Unix example :
mv reports_server_name.dat reports_server_name.dat.old
3- Try again to start Reports Server
Possible causes of the issue are:
1.scheduled jobs
or
2.restart of report server while some jobs were waiting in the queue
Regards,
Alex
If someone's answer is correct or helpful please mark it accordingly.
Edited by: AlexDiniasi on 02.08.2012 18:49

Can't start iPod in Manual Mode

I can't seem to start an 30GB iPod in Manual Mode, even while pressing the command and option keys while starting up.
Any ideas on how to force it into Manual Mode?

iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.
Try with it it in disk mode.
Putting iPod into disk mode.

Oracle 10.2G - windows service started but instance is in nomunt mode

Hello
I have trouble with oracle 10.2G in windows 2003...
I run following command:
oradim.exe -startup -sid sid_name -usrpwd pass -starttype srvc,inst
After above command, windows service has status "started", but instance is in nomunt mode.
In alert.log I don't see any error...
Thanks for any help.
Regards

in oradim.log I found following error:
Tue Dec 18 05:00:02 2007
ORA-01017: incorrect username/password; logon refuse
but I don't change any password...
This is my alertlog:
Tue Dec 18 05:00:01 2007
ORACLE V10.2.0.2.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 4 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1468M/2047M, Ph+PgF:3527M/3947M, VA:1940M/2047M
Tue Dec 18 05:00:01 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as D:\oracle\ora102\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
resource_limit = TRUE
shared_pool_size = 209715200
shared_pool_reserved_size= 20971520
trace_enabled = FALSE
nls_language = POLISH
nls_territory = POLAND
nls_sort = POLISH
sga_target = 838860800
control_files = D:\ORACLE\ORA92\DATABASE\CONTROL01.CTL, D:\ORACLE\ORADATA\TETA\CONTROL02.CTL
db_block_size = 8192
compatible = 10.2.0
db_files = 100
db_file_multiblock_read_count= 8
fast_start_mttr_target = 0
undo_management = AUTO
undo_tablespace = ROLLBACK_DATA
O7_DICTIONARY_ACCESSIBILITY= TRUE
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = TETA
session_cached_cursors = 100
job_queue_processes = 5
parallel_min_servers = 0
parallel_max_servers = 0
background_dump_dest = D:\ORACLE\ADMIN\TETA\BDUMP
user_dump_dest = D:\ORACLE\ADMIN\TETA\UDUMP
core_dump_dest = D:\ORACLE\ADMIN\TETA\CDUMP
db_name = TETA
open_cursors = 2048
star_transformation_enabled= FALSE
pga_aggregate_target = 157286400
workarea_size_policy = AUTO
aq_tm_processes = 1
PMON started with pid=2, OS id=291912
PSP0 started with pid=3, OS id=142740
MMAN started with pid=4, OS id=656244
DBW0 started with pid=5, OS id=652136
LGWR started with pid=6, OS id=755832
CKPT started with pid=7, OS id=226276
SMON started with pid=8, OS id=661212
RECO started with pid=9, OS id=467040
CJQ0 started with pid=10, OS id=157796
MMON started with pid=11, OS id=249832
MMNL started with pid=12, OS id=795116
Tue Dec 18 05:00:02 2007
Oracle Data Guard is not available in this edition of Oracle.
Regards

"Reporting services" service does not start automatically

I have installed reporting services from SQL Express SP1 package. OS is Windows 2000 SP4. Just after installation "Reporting services" service has StartMode=Automatic and LogOnAS=LocalSystem as shown in SQL Server Configuration Manager. When system is rebooted reporting services state is Stopped and there is 2 errors in System log:
1. Timeout (30000 milliseconds) waiting for the SQL Server Reporting Services (REPS) service to connect.
2. The SQL Server Reporting Services (REPS) service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
If i select "start" from service's context menu then it starting normally and it's state becomes Running.
What can i do to make reporting services starting automatically on system load?

i have the same problem here in one of our servers ,, it was working and suddenly it stopped i don't know why
when i reviewed the Event Viewer :
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 8/22/2010
Time: 12:05:26 PM
User: N/A
Computer: SERVICE-CENTER
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information. ---> System.UnauthorizedAccessException:
Access to the path 'C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer\RSReportServer.config' is denied.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at Microsoft.ReportingServices.Diagnostics.Globals.SafeOpenXmlDocumentFile(XmlDocument doc, String pathToXmlFile)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.LoadDocument()
   at Microsoft.ReportingServices.Diagnostics.R...
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any body can help with this ,, because i didn't find anything helpful till now !!!
dear all
i installed SQL Server 2005 SP2 and it solved my problem
wish you all luck

Windows listener service will not start automatically

I just installed 11.2.0.3 Standard Edition One and when I reboot the server, the listener service is not started. The service is set to start Automatically. I have to login, open services and then push start.
The oraceServiceSId does start automatically,
The listerner service does not start automatically,
The dbconsole service does not start automatically,
The processManger1 service (from middleware) does not start automatically
This is Windows 7 64 bit.
Any ideas?
Edited by: brian.mcginity on Dec 10, 2011 11:25 AM

I found where the services logs are recorded in the event viewer. Funny thing just happened, I was just about to do another reboot so I could check the logs when I noticed there were window updates in q.
So after running the updates, the os requested to reboot . For the first time, the services started automatically.
These are the updates which fixes the probem:
Security Update for Windows 7 for x64-based Systems (KB2639417)
Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2618444)
Security Update for Windows 7 for x64-based Systems (KB2620712)
Cumulative Security Update for ActiveX Killbits for Windows 7 for x64-based Systems (KB2618451)
Edited by: brian.mcginity on Dec 13, 2011 9:52 PM
Edited by: brian.mcginity on Dec 13, 2011 9:53 PM

11.1.1.5 Presentation Server won't start automatically

Hi, gurus. Interesting problem with 11.1.1.5. 4 of 5 OBIEE services start automatically. Presentation Server doesn't. An excerpt from sawlog0.log is shown below. What's odd is that even though it fails when starting automatically, we can go into Fusion Middleware and start it manually - no problems there. So it can start, and from that point everything works great, it just won't start along with all of the other services.
Any ideas?
[2012-08-22T14:29:47.000-05:00] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0:29] [tid: 1107712320] Failed to restore ctx from reference[[
File:executioncontext.cpp
Line:286
Location:
saw.dms.conext.unwrap
saw.threadpool
saw.threads
ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0:29
ThreadID: 1107712320
[2012-08-22T14:29:47.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0] [tid: ] Server shutdown initiated by OPMN.[[
File:socketrpcserver.cpp
Line:818
Location:
saw.rpc.server.listen
saw.sawserver
ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0
[2012-08-22T14:29:47.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:712
Location:
saw.sawserver
ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0
[2012-08-22T14:30:33.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 120325.0800 BP2 64-bit) are starting up.[[
File:sawserver.cpp
Line:465
Location:
saw.sawserver
ecid:
[2012-08-22T14:30:35.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:712
Location:
saw.sawserver
ecid:
[2012-08-22T14:30:41.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 120325.0800 BP2 64-bit) are starting up.[[
File:sawserver.cpp
Line:465
Location:
saw.sawserver
ecid:
[2012-08-22T14:30:41.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:712
Location:
saw.sawserver
ecid:
]]

Alas, although out-of-sync GUIDs fit all of the clues, that wasn't the answer.
The problem still exists. Here's the relevant portion of the opmn.log file.
These first five sections represent an attempted start of all services in Fusion Middleware by clicking Start All
Request 1fa starts the BI Server successfully.
Request 1fb starts the BI Scheduler successfully.
Request 1fc attempts to start the Presentation Server but fails.
Request 1fd starts the Java Host successfully.
Request 1fe starts the Cluster Controller successfully.
So the Presentation Server will not start automatically as a part of Start All.
However, manually clicking 'Start Selected' for the Presentation Server (request 236 below) starts the service. So the short version is that we can start it manually, but not as a part of Start All.
[2012-08-23T16:03:58][opmn][TRACE:1][667][OPMN]Request 1fa Started. Command: /start?ias-component=coreapplication_obis1
[2012-08-23T16:03:58][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1181693061:0)
[2012-08-23T16:03:59][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1181693061:8643) [No addresses for the request.]
[2012-08-23T16:03:59][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1181693061:8643)
[2012-08-23T16:03:59][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693061
[2012-08-23T16:04:01][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1181693061:8643)
[2012-08-23T16:04:01][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 1fa Completed. Command: /start?ias-component=coreapplication_obis1
[2012-08-23T16:04:01][opmn][TRACE:1][667][OPMN][code:pm-requests]Request 1fb Started. Command: /start?ias-component=coreapplication_obisch1
[2012-08-23T16:04:01][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obisch1~OracleBISchedulerComponent~coreapplication_obisch1~1 (1181693062:0)
[2012-08-23T16:04:03][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obisch1~OracleBISchedulerComponent~coreapplication_obisch1~1 (1181693062:8995)
[2012-08-23T16:04:03][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 1fb Completed. Command: /start?ias-component=coreapplication_obisch1
[2012-08-23T16:04:03][opmn][TRACE:1][667][OPMN][code:pm-requests]Request 1fc Started. Command: /start?ias-component=coreapplication_obips1
[2012-08-23T16:04:03][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:0)
[2012-08-23T16:04:05][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9021) [No addresses matched the properties for the request.]
[2012-08-23T16:04:05][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9021)
[2012-08-23T16:04:05][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693063
[2012-08-23T16:04:07][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9021) [No addresses matched the properties for the request.]
[2012-08-23T16:04:07][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9021)
[2012-08-23T16:04:07][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693063
[2012-08-23T16:04:09][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:0)
[2012-08-23T16:04:11][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9043) [No addresses matched the properties for the request.]
[2012-08-23T16:04:11][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9043)
[2012-08-23T16:04:11][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693063
[2012-08-23T16:04:13][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 1fc Completed. Command: /start?ias-component=coreapplication_obips1
[2012-08-23T16:04:13][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9043) [No addresses matched the properties for the request.]
[2012-08-23T16:04:13][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9043)
[2012-08-23T16:04:13][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693063
[2012-08-23T16:04:14][opmn][TRACE:1][667][OPMN][code:pm-requests]Request 1fd Started. Command: /start?ias-component=coreapplication_obijh1
[2012-08-23T16:04:14][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obijh1~OracleBIJavaHostComponent~coreapplication_obijh1~1 (1181693064:0)
[2012-08-23T16:04:16][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obijh1~OracleBIJavaHostComponent~coreapplication_obijh1~1 (1181693064:9053)
[2012-08-23T16:04:16][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 1fd Completed. Command: /start?ias-component=coreapplication_obijh1
[2012-08-23T16:04:16][opmn][TRACE:1][667][OPMN][code:pm-requests]Request 1fe Started. Command: /start?ias-component=coreapplication_obiccs1
[2012-08-23T16:04:16][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obiccs1~OracleBIClusterControllerComponent~BIClusterController~1 (1181693065:0)
[2012-08-23T16:04:18][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obiccs1~OracleBIClusterControllerComponent~BIClusterController~1 (1181693065:9079)
[2012-08-23T16:04:18][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 1fe Completed. Command: /start?ias-component=coreapplication_obiccs1
[2012-08-23T16:04:53][opmn][TRACE:1][667][OPMN][code:pm-requests]Request 236 Started. Command: /start?ias-component=coreapplication_obips1
[2012-08-23T16:04:53][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693066:0)
[2012-08-23T16:04:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693066:9537) [No addresses matched the properties for the request.]
[2012-08-23T16:04:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693066:9537)
[2012-08-23T16:04:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693066
[2012-08-23T16:04:56][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693066:9537)
[2012-08-23T16:04:56][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 236 Completed. Command: /start?ias-component=coreapplication_obips1

Oracle Report Server 11g Start Automatically

Dear All
IF you want to start the report server in oracle forms 11g , you must go to this link :
https://localhopst:Port No/reports/rwservlet/startserver
I want to start the report server automatically as windows service without that step .
Thanks in advanced

The following can be used to start the managed server (i.e. WLS_REPORTS). Although this will not start the Reports inProc server, it will get the managed server started. A stand-alone rep server can be monitored by opmn and started automatically. See MyOracleSupport note 1126019.1
Refer to the product documentation for more info about Windows Services and working with WLS Managed Servers.
<blockquote>http://docs.oracle.com/cd/E23943_01/web.1111/e13708/winservice.htm</blockquote>
Also be aware of the following MyOracleSupport note:
<blockquote>1060058.1 - How to Install MS Windows Services For FMW 11g WebLogic Domain Admin and Managed Servers</blockquote>
Finally, you can use this search:
<blockquote>http://www.oracle.com/pls/as111160/search?word=windows+service</blockquote>
Edited by: Michael Ferrante (Oracle) on Dec 28, 2012 4:13 PM

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

Db 11G : don't start LISTENER SERVICE in automatic services

I have installed DB 11G but when i restart the server the services named
OracleOraDb11g_home1TNSListener
don't start automatically.
I must start it manually!!
What kind of problem is this ??

i have found this
The OracleOraDb11g_home2TNSListener service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Oracle XE Listener Requiring Service To Be Set To 'Automatic (Delayed Start

Can anyone offer any insight/explanation as to why the Oracle Listener would require the service to be set to 'Automatic (Delayed Start)' When it is set to just automatic, it does not even try to start. No output to the listener log, and nothing to the event viewer. It is as if it never even tries to start. Once switched to 'Automatic (Delayed Start)' it works as expected. Additionally if you manually start the service due to it not starting automatically, it works fine as well.
OS: Windows 7 64BIT
Service is being run by the local system account and is set to allow to interact with desktop. -Local system account is part of the administrator group.

OS: Windows 7 64BITFirst point, win7 isn't on the 10g XE "supported OS" list. The installer is nearly as old as Firefox 1.0. Not to say folks haven't been able to get it working, plenty of other threads cover that topic.
Delayed start, auto start ... how critical is that functionality for your install? My suggestion, set it to Manual, and if you need the database, start the listener and then start the database service. If the database isn't needed keep your RAM and system resources available for other stuff.
Sorry can't be more helpful (esp. for win7, don't have it, don't use it, same for vista) but XE is more of a "playground" environment for test drives, kicking the tires, etc., a practice resource intended as an introduction to managing an oracle instance.
And always start the listener service first, that allows the database to register with the listener as it completes its startup processing. If startup goes the other way around, the Apex might not be immediately available, but a sqlplus system connection and `alter system register;` command will fix that.

Howto prevent Oracle XE 11g from start automatically in windows ?

I complete the installation of OraceXE 11g in windows, noticed it start automatically on the next boot. I wonder if there is a way to run a configuration setting to let the application start on boot or not.
Yes I can go to the services and disable, but just wondering if there was a configuration tool to make it easier.
THX Dino.

Hello Dino,
you could take a look at the sc.exe, as decribed in this [url http://support.microsoft.com/default.aspx?scid=kb;en-us;251192]MS Knowledge Base Article, e.g.
sc config OracleServiceXE start= demandNote that there really must be a blank between start= and the value for that option.
Simply run this for any Windows service you don't like to start automatically.
The KB-article gives you any additional information you may need.
-Udo

Oracle 11g XE listener does not start automatically during boot

Hi,
This happened to me recently I just wanted to share it with you.
For development I was running Standard Edition, at some point I decided to run also XE on the same server for another reasons. Everything was working fine, except that after restart of the server, the XE listener is not starting automatically. Debugging the startup script I found that this happens because of a bug in the code, which assumes that XE listener is running if it finds the word LISTENER within the processes list. I didn't found any obligation in the docs for running XE without any other databases on the same host.
In file /etc/init.d/oracle-xe, at line 556 the code is failing:
1     + status='oracle 2889 1 0 May13 ? 00:00:05 /oracle/ora112se/bin/tnslsnr LISTENER -inherit'
2     + '[' 'oracle 2889 1 0 May13 ? 00:00:05 /oracle/ora112se/bin/tnslsnr LISTENER -inherit' == '' ']'
As you can see I have another listener(the one for SE) running and because of the XE startup script found the keyword LISTENER it’s supposing that the XE LISTENER is already running.
To fix this simply change line 556 from:
1     status=`ps -ef | grep tns | grep oracle`
To:
1     status=`ps -ef | grep tns | grep oracle | grep xe`
Now XE listener is started automatically during boot.
Sve
Blog: http://sve.to
Twitter: sgyurov

I though the same thing, but XE LISTENER is running on localhost and port 1522. On the other hand XE have local_listener explicitly set to the very same connection descriptor. Even XE installation was second on this server.
I've could change that yes, but the startup script doesn't seemed to have this mind.
Regards,
Sve

Oracle DB 11g R2, Services starts automatically against "Manual" mode

Similar Messages

Maybe you are looking for