Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!

Hi,
I have installed AIX 5L on 32 bit kernel machine.
Thereafter I have installed Oracle 9.2.0.1 Database!!
But whenever I am running sqlplus or listener it gives me an error that "you cannot run 64 bit application on 32 bit machine"
but I am able to run DBCA or NETCA command from oracle home directory & it runs properly. It also create & configure the listener but due to the above mismatch it could not start!!
Can any one help !!
Regards,
Indraneel

Same thread into Installation Forum : Re: Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!
Nicolas.

Similar Messages

Oracle 11g R2 Installation on Windows 7 (64 bit)

While installing, it is asking for Proxy Server. What should I enter?

I'm installing on laptop Oracle 11g R2 Installation on Windows 7 (64 bit) it was asking me to enter Proxy server details, since I'm not connecting internet with proxy I've skipped the step. But after that when reached the "System class" there was two radio buttons 1)Desktop Class - which selected default and clicked on Next button, then it disappeared. Looks like process was stopped. i have looked it in Windows Task manager it is not there.
Is any one know what is going on?
Thanks.

Oracle db 10gR2 installation on AIX 5 series server

can anyone please suggest me a gud link to get detailed steps for installing oracle database 10g R2 on AIX server as I am completely new to AIX.
I have done db admin and maintainence on Solaris and Linux, though.
Please also suggest gud installation guide for Oracle Application server 10g R2 forms and services only.
thanks in advance!

http://download.oracle.com/docs/cd/B19306_01/install.102/b28055/toc.htm
www.oracle-base.com for oralce Apps installations...

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Issue with Oracle service bus installation on Windows 7 64 bit machine

Hi,
I am trying to install Oracle service bus 11.1.1.4 in Windows 7 64 bit machine for which i have downloaded the generic installers of both weblogic server and Oracle service bus. As per the instructions -
1. Install JDK 1.6
2. Install Weblogic server
3.Install Eclipse separately (In my case Galileo 11.1.1.5 64 bit) - Just unzip the contents in the home directory where weblogic server is installed
4. Install OSB
I have installed all the above 1,2,3 in the same folder as per the instructions. But when i try to install OSB which asks for eclipse home location. But when i give the eclipse home location, it gives an error ""Home location is invalid" and i am unable to proceed with the installation.
I have tried this with OSB 11.1.1.5 as well and have the same issue.
Does anyone has any links which provides the steps to install OSB in Windows 7 64 bit machines or if someone can help me to resolve the above issue ?
I really appreciate any information on this as it is urgent.
Thanks

I have installed OEPE 11.1.1.6.1 now in the same middleware home as weblogic server but when i try to install OSB 11.1.1.4 in the same middleware home, it asks for OEPE home location. Even though i provide the OEPE home location , it displays as "invalid oepe home location".
I have been struggling to get this sorted out so that i can carry out IDE development in OSB 11.1.1.4
Below are the paths where sfotware are installed -
JDK - C:\Oracle\Middleware\Java\jdk1.6.0_21
Weblogic server - C:\Oracle\Middleware\wlserver_10.3
OEPE - C:\Oracle\Middleware\oepe-galileo-all-in-one-11.1.1.6.0.201007221355-win32-x86_64
Thanks

Oracle 9.2 installation on AIX-unix version 5.2

Hi,
I need to install oracle 9.2 on AIX server whose OS is version 5.2 and hardware is IBM P-Series P615 . Will there be any problem in doing this activity or successfully it can be installed ?

Hi;
Why oracle 9i? If possible use supported version like 11gR2. If you have to install oracle 9iR2, yes you can make installation on 5.1, 5.2, 5.3 (5L)(64bit only)
For details please see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Oracle 8.i Installation - FOR AIX 5 -

Is Oracle 8i supported on AIX 5 (I know it is supported on AIX 4.3.3), but the install scripts do not seem to be coded for AIX5.
Thanks
Kevin Shaw
dba e-result plc

Oracle's policy seems to be 'remove the download when the product becomes obsolete and unsupported'.
Oracle8i has been unsupported for some time now. If you are lucky, a conversation with your Sales Rep and with Oracle Support might provide the software.
<off>
But I must admit confusion - why upgrade pieces and expect the non-upgraded pieces to continue working without difficulty? Your mix-and-match approach is a recipie for long-term problem resolution opportunities
</off>

Oracle Database 10g installation on windows 7 32 bit

Hi,
I tried to install Oracle DB 10g but an error appeared (ORA-12546): permission denied, I searched for this error and found the following:
Cause: User has insufficient privileges to perform the requested operation.
Action: Acquire necessary privileges and try again.
BUT: I cannot understand the solution, Can you help me solve it??????
Thank you very much,,,
Tasneem

Tasneem wrote:
Thank you for your response,,
I actually use the version 10.1 which is not supported by win7, as you said before...
Now I am ok., the DB installation (10.2) is succeeded, but I installed Oracle forms builder 10.1, and when I tried to connect the form with the database, it requested from me to enter database name, I cannot know the exact name, Is there a way to find it?? (the error: ORA-12154)
Please reply as soon as possible,,
Thank you very much,,
TasneemWhat do you mean " I cannot know the exact name". You created it, didn't you?
see http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/

Oracle 11g R2 Installation on Windows 8 (64 bit)

I am getting error. Is Oracle 11g R2 compatible with Windows 8?

No, currently it is not - supported/certified versions are identified in the Install Guide
Oracle Database Preinstallation Requirements
Pl also see - http://www.oracle.com/technetwork/database/windows/tech-info/sod-oracle-db-win8-win2012-1853201.pdf
HTH
Srini

Xlc file Required for Oracle Product Installation on AIX 6.1

Hi All,
I am trying to install Oracle 11g Forms & Reports on AIX 6.1 [TL12].
I have installed JDK and Weblogic Server without any Errors.
When we reach 93% on software Alone installation with 11g Forms & Reports, we got some error
ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '///INS_PRECOMP.mk'We raised a SR for this Error, Oracle Support given one solution to follow.
>
Yes, there is a known issue with AIX OS.
Before starting the Oracle Fusion Middleware 11g Classic installation on IBM AIX, check for "xlc" availability on the system. It should be present either under /usr/bin/ or under >/usr/vac/bin directory.
If /usr/vac/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/vac/bin/xlc /usr/local/bin/xlc
If /usr/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/bin/xlc /usr/local/bin/xlc
Please clean up the failed install and start new install once you follow the above steps and let me know the results.But Unfortunately in our AIX 6.1 Box we dont have any 'XLC', in any of the folder in entire file system.
What is this XLC ?? if that is not available how to create the SYMLINK ?
Kindly Some one Advice me.
Regards,
Paja

Hi Paja,
I would recommend you o post this thread under application server/weblogic forum.
Arik

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

Oracle 10g R2 installation with ASM+RAC

Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.

Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

Printing tools on Aix server with Forte/Oracle

I asked for it some weeks ago, but i had not enough answers... may be
you were on vacations !!!
I'm looking for a good software for manage print jobs on Aix server with
Oracle rdbms.
Something we cant use to make reports, bills, etc.. and callable with ou
without Forte.
If possible, reports template could be made on NT client (graphical
tools) but the jobs will run on the Aix (to avoid running on a NT client
and take all the network resources...).
What do you use on your site ?
Thanks.
Cordialement.
Patrice Bourdon
Alliance Sante France
Tel : (33) 02.54.60.26.27
Fax : (33) 02.54.60.25.00
e-M@il : [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I asked for it some weeks ago, but i had not enough answers... may be
you were on vacations !!!
I'm looking for a good software for manage print jobs on Aix server with
Oracle rdbms.
Something we cant use to make reports, bills, etc.. and callable with ou
without Forte.
If possible, reports template could be made on NT client (graphical
tools) but the jobs will run on the Aix (to avoid running on a NT client
and take all the network resources...).
What do you use on your site ?
Thanks.
Cordialement.
Patrice Bourdon
Alliance Sante France
Tel : (33) 02.54.60.26.27
Fax : (33) 02.54.60.25.00
e-M@il : [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Oracle 11gR2 RAC installation with DNS

Dear Guru's,
I want to configure RAC on two node cluster with DNS(For SCAN) in my testing server.
O.S: RHEL5.4(64 bit)
Oracle Version: 11gR2(11.2.0.2)
Note: Am creating nodes in VMware ESXi server.
Just I want to know whether DNS should be configure in any one of those NODES or in separate machine.
Bala :)

Hi Bala,
I want to configure my Database with & without DNS. (Will try both installation in different servers)I think, you have already received a link on very good article about Oracle RAC installation without DNS and DHCP (I mean Jeffrey Hunter's article).
There is one more about Oracle RAC installation with DNS and DHCP (http://gjilevski.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/).
And want to know how it forwards the client connection if a node fails.. Can anyone update the URL for this..There are a lot of information about it:
- http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
- http://docs.oracle.com/cd/E14072_01/java.112/e10589/apxracfan.htm
- http://www.oracle.com/technetwork/database/app-failover-oracle-database-11g-173323.pdf
Very good videos:
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/session/session_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/select/select_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/callback/callback_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/fan/fan_viewlet_swf.html
Hope it helps,
Best regards,
Gena

Oracle SOA Suite Installation with traditional Oracle Infrastructure

Dear All.
Good day, I have a question related to the Oracle SOA Suite, I need to know if I can use Oracle Application Server 10g Release 2 ( the traditional version) which contains the Oracle Infrastructure & Oracle Middle tier on the same product, Business Intelligence & Forms version, to work with Oracle SOA Suite 10.1.3 Release 3, to give the authinticatio & authoraization using Oracle Internet Directory not using the Java SSO.
Is this has any effect of development the BPEL Processes or the web services? such as using specific Java containers??
can I use this OAS 10g Realease 2 to deploy the web applications (J2EE) and integrate them with BPEL processes deployed on the Oracle SOA Suite Installation??
I really need help, thank you in-advance
Adham Hattab

Hello.
When you install SOA Suite you get typically a "home" and "oc4j_soa" container. You can deploy apps into the "home" container if you wish. Technically you could also deploy into oc4j_soa, but I strongly suggest leaving it alone!
You can also do a 2nd Oracle install in a new Oracle Home to just have a J2EE server, in order to deploy web apps. Or, you can use WebSphere, Sun, or WebLogic, too. You can add a new OC4J container to your Oracle app server home. That is what we do typically - that way large apps can have their own JVM and memory, you can restart an OC4J container to "reboot" a problem app without impacting apps in other OC4J containers, etc.
You can configure OAS to use OID or any 3rd-party LDAP for authentication/authorization, including Active Directory. At our site we use OID Directory Integration and Provisioning (DIP) to import AD users/groups into OID. This way corporate users/groups/logins are all available to OID, making SSO that much more powerful, with no need to create new accounts just for OAS.
The install docs and/or MetaLink (My Oracle Support now) should have details on what versions of OAS work with OID. As I mentioned, we have Business Intel. & Forms (10.1.2) and SOA Suite (10.1.3.3) both using OID 10.1.4.0.1 (which itself is on top of OAS 10.1.2.2).
Daren

Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!

Similar Messages

Maybe you are looking for