Oracle Developer 10g

Hi,
I installed Oracle Developer 10g onto my machine but when I opened the Report, it crashes, I then figured out that I need to apply the patch 7047034. But this patch needs to be applied using Opatch.
When I run the opatch, it gives me following error:
The oracle Home is not OUI based home. please give proper oracle home. Opatch returned with error code =1.
please let me know how to resolve this.
thanks

user12294561 wrote:
I managed to resolve this error but now giving error:
Opatch failed because of inventory problem.Please check the log file for details.
Thanks,
Hussein

Similar Messages

How to install oracle developer 10g on rhel 5

hi,
i have install oracle database 10g on rhel5 now i want to install developer 10g on this machine so plz send me any link where i can know step by step installation of oracle developer 10g on rhel5.
thanks

superdba wrote:
although i know this forum is related to database but i would also be grateful if u send me the link of right forum.The link?How about the steps, so you can find the right forum regardless of the question?
Start at http://forums.oracle.com (top left of this page)
Scroll down to a relevant category, such as Developer Tools
If the relevant forum is not visible click on 'More' (Forms IS visible)

How to install oracle developer 10g on red hat 5.3

Dear forum members,
i have to install oracle developer 10g on red hat 5.3 . I am searching on google and metalink but i did not find any doccument.
If somebody has some material or any doccument for this Installation plz help me.
regards

i have fullfilled pre-requisites to install developer 10g on red hat 4.5
i copy the source in "/var/opt/oracle/" Source is in .cpio format.
i unzip this source with cat Disk1.cpio | cpio -icd.
when i run the runINstaller it cant find /var/opt/oracle/..........Disk1/products.xml file.
when i find this file with command find -name 'products*' or find -name '*.xml'
i cant find products.xml.
is there any problem with source
reply

How To Use F4 Command in Oracle Developer 10g to close Form on Web

Hi,
How can we close a running form and come on main menu screen in Oracle Developer 10g, when we are working on Web.
This can we do easily in Oracle Developer 6i but it will work for desktop based application.
Thanks

Hi Vansul,
Thanks for your reply.
can you please tell me in which file i need to make changes.
where is that file located, i didn't see any folder with the name of configuraton.
How can i add entry for F4 in file.
Thanks

Pinging ip's with oracle developer 10g

db and dev 10g rel2 ,
hi all,
i want to ping some ip's through a form built with oracle developer 10g rel2 ,
- i have two choices here ,
-there is an application can ping a lot of ip's automatically , it has options to load a file in which ip's are stored , and another option to save the result into a .csv file ,
so i am searching for a way to control that application , i want a way to do these tasks through a button on my form :
1- open that application .
2 -load the ip's .
3- save the result to a .csv file .
4- transferring the .csv data to a block on my form . -- and this is the simple step which i can do individually , but i do not know how to deal with the steps previously mentioned .
2- the second choice is to open the os command prompt through a button , and ping through it , but the problem is the result would not be displayed in columns , and i do not know a way to load the result into a block on the form.
if you could help me with any of these choices , or if you have another one , i would appreciate that .
thanks in advance

i've tried to use it like it is in the example : , i used only the first two parameters
DECLARE
c utl_tcp.connection; -- TCP/IP connection to the Web server
BEGIN
c := utl_tcp.open_connection(remote_host => 'www.acme.com',
remote_port => 80);
end ; by the way , before i posted the thread , i've tried it , but i faced problems while executing it , that's why i asked if it is
suitable for me or not .
when i execute it by the above code , the engine tells me that "procedure successfully completed , but without any result .
2- if you could tell me what does "remote_port" means , because i posted the number in the example as it is .
i do not know what is port ?
3- do you know about a jave bean can do my requirements ?
thanks a lot

Installation of Oracle developer 10g with database 9i in single box

I want to install Oracle developer 10g (Forms/Reports) with oracle database 9i.
Can Forms/Reports 10g servers reside on the same box that holds the database 9i as well?
Please provide me the solution for the same.

Can Forms/Reports 10g servers reside on the
same box that holds the database 9i as well?Yes, just use different Oracle Homes.

Trying to download Oracle Developer 10g for Linux gives JavaException ...

Result of "accepting" the agreement for Oracle Developer 10g for Linux :
<FONT CLASS=PortletText1>Error: The servlet produced the following error stack. sun.io.MalformedInputException
     at sun.io.ByteToCharUTF8.convert(ByteToCharUTF8.java:152)
     at java.io.InputStreamReader.convertInto(InputStreamReader.java:137)
     at java.io.InputStreamReader.fill(InputStreamReader.java:186)
     at java.io.InputStreamReader.read(InputStreamReader.java:249)
     at oracle.webdb.utils.SimpleBufferedReader.read1(Unknown Source)
     at oracle.webdb.utils.SimpleBufferedReader.read(Unknown Source)
     at oracle.webdb.page.v2.DataProcessor903.readContentStream(Unknown Source)
     at oracle.webdb.page.v2.DataProcessor903.readContent(Unknown Source)
     at oracle.webdb.page.v2.DataProcessor903.getPageMetaData(Unknown Source)
     at oracle.webdb.page.v2.DataProcessor903.process(Unknown Source)
     at oracle.webdb.page.PageBuilder.process(Unknown Source)
     at oracle.webdb.page.Main.doRequest(Unknown Source)
     at oracle.webdb.page.ParallelServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
</FONT>

Please note the message on download page,
The Oracle Management Pack for Linux features of the Unbreakable Linux support offering is provided via a full download and installation of Oracle Enterprise Manager 10g Grid Control. No additional Enterprise Manager 10g downloads are required.

Is Oracle Developer 10g certified with Windows 7 and IE-8 ?

Hi All,
Is Oracle Developer 10g certified with Windows 7 and IE-8 ?
Regards,

Is Oracle Developer 10g (32-bit and 64-bit) certified with Windows 7 (32-bit and 64 bit) and IE-8 ?Yes it is certified on 32-bit only -- Oracle Forms/Reports Builder 10gR2 or 11g are certified with Windows 7 (32-bit)
Please see (Forms / Reports Builder 10gR2 or 11g Certification on MS Windows 7 [ID 1112213.1]) for details.
Also, see (Cannot Open Forms/Reports Within Forms/Reports Builder 10gR2(10.1.2.3) on Windows 7 [ID 1306651.1]).
Thanks,
Hussein

I want to scan an image from oracle developer 10g ?

Hi everybody.
How can I scan an image from oracle developer 10g ?
thnaks in advance..

we did this in a similar way RajeshAlex describes.
We used software "imaging professional" which was able to be controlled via a command-file and told by that command-file to store the scan-result into a local file.
What we did was:
Copy command-file to client via WEBUTIL_FILE.AS_TO_CLIENT..
Execute command-file via WEBUTIL.CLIENT_HOST
Show Forms-Alert on which the user has to click after scanning was finished
Check local file which was defined in command-file and, if present, load it into the database using WEBUTIL_FILE.CLIENT_TO_DB..
Hope this helps

Recommend a book for oracle developer 10g

Hello.
Here's a good book,
http://www.amazon.com/gp/reader/0072120487/ref=sib_db_rdr/104-6764208-1167117#reader-link
can anyone recommend a current equivalent that covers oracle developer 10g, forms and reports 9
Jim

I'd really recommend you study an actual supported version.

How to print report in Character mode using Oracle Developer 10g

Dear,
I migrate my forms and reports from Oracle Developer 6 to Oracle Developer reports 10g,
We are using some character mode report for bill printing. But when i run these report through menu on Web i got error message like
"REP-1920: Character mode runtime incompatible with DESFORMAT of PDF, HTML, HTMLCSS, SPREADSHEET or RTF"
i don't want to change the character mode to any other mode because it effects the printing.
so how can it possible to set the mode to character and view report on Web.
pls. suggest me solution.

You have to pass the PRT file name as value for the DESFORMAT and use mode= MODE=CHARACTER.
E.g.
http://<host name>:<port>/reports/rwservlet?desformat=dflt&mode=character&.....

How to print report in Charactor mode using Oracle Developer 10g

Dear,
I have converted my few reports from Oracle Developer forms 5 to Oracle Developer forms 10g,
i am running these reports on Web, for that i have configour "rwserver" server.
But when i run these report through menu on Web i got error message like
"REP-1920: Character mode runtime incompatible with DESFORMAT of PDF, HTML, HTMLCSS, SPREADSHEET or RTF"
i don't want to change the character mode to any other mode because it effects the printing.
so how can it possible to set the mode to character and view report on Web.
pls. suggest me solution.
Thanks

You have to pass the PRT file name as value for the DESFORMAT and use mode= MODE=CHARACTER.
E.g.
http://<host name>:<port>/reports/rwservlet?desformat=dflt&mode=character&.....

Oracle WebLogic Server with Oracle Developer 10g

Hello Friends
Currently I have customize product with I am using Oracle Developer 10gR2 as Front End, AS10gR2 as Middle Tier and DB10g as Back End. Now I want to replace the Middle Tier by Oracle WebLogic. My question is to all of you that Is it possible? If yes then I would like to request all of you please share some configuration document or Metalink Note ID which can help me to configure it.
Thanks
Makshud

This link should answer your questions.
http://www.oracle.com/technology/products/jdev/htdocs/11/as_supportmatrix.html
I cant find your configuration listed.
thanks,
Anoop

Error installing Oracle Developer 10g R2

First off, please let me know if this is the wrong forum.
I'm trying to install Oracle Dev 10g R2 on a Windows XP SP3 x86 computer, but I'm getting an error every time I start it. We have it extracted to two folders, one for disk 1 and one for disk 2. I go into disk 1, install, and click setup.exe. The command prompt comes up, I can see it say everything passes, then after maybe 10 seconds it crashes while trying to load the Oracle Universal Installer. The error message is: "An unhandled win32 exception occurred in setup.exe [2320]".
I only have Visual Studio 2005 installed right now (we're trying to create a base image to make system deployment easier, and the dev that needs this particular laptop requires a different version of VS than the rest of the devs so I haven't installed 2008 or 2010 yet). Could that be the cause? Does 10g R2 require VS 2008 or 2010 to be installed or something?
Any help would be greatly appreciated.
Steve
Edited by: user13479334 on Dec 14, 2010 12:03 PM

I re-imaged the laptop, and the install went through this time.

ORACLE DEVELOPER 10G FORMS, LOV AND QUERYING THE FORM

I have a form and I built an LOV on a particular field. The LOV returns the values, I select a value, it goes into the field, but what I want is to have the form retrieve all the information from the database and display (only) all the data. But when I put a value in the field from the LOV, nothing happens. i have tried to have the form go into "enter_query" mode, then select from the LOV, then end the "when button pressed" with "excute_query". But it will ask if i want to save, i say no, then it just displays the first record in the database. what am i doing wrong?
thank you,
Steven

here is my complete code on this button: when i press the button, it keeps asking me if i want to save it (if i say yes, it adds it to the table in the database, which i do not want). however, if i first select "enter query" from the menu bar, and then click on my button, everything works as expected.
set_item_property('SL_3_ITEMS_HEADER.SL_3_SHORT_TITLE',queryable,property_true);
--Set_Block_Property( 'SL_3_ITEMS_HEADER', DEFAULT_WHERE, 'parker.SL_3_SHORT_TITLE=:sl_3_short_title');
declare
     SL3 varchar2(12);
BEGIN
     go_item('SL_3_SHORT_TITLE');
list_values;
SL3 := :SL_3_ITEMS_HEADER.SL_3_SHORT_TITLE;
     if SL3 is not null then
          select SL_3_SHORT_TITLE into :SL_3_ITEMS_HEADER.SL_3_SHORT_TITLE
          FROM parker.SL_3_ITEMS_HEADER WHERE SL_3_short_title = SL3;
     ELSE
          message ('You need to specify an SL-3 to be able to search');
     end if;
     exception
          when no_data_found then
          message('An SL-3 with that name does not exist.');
          clear_form;
     end;
     execute_query;

Oracle Developer 10g

Similar Messages

Maybe you are looking for